VPE1 - Different layout in Create Sales Representative

Dear All,
   There are two systems ( DEV & QAS ) which have same component versions.
   In the Tcode : VPE1 -> Create Sales Representative. Under the Organizational Assignmnet,
   in the QAS I can see the 'Position' field but in the DEV I couldn't see it.
   Do you mind to advise on this ?
Best Regards,
Ken

At DEV, somebody might have changed/altered Account Group for Sales representive.
Compare the Account Group for Sales representive at DEV with QAS.
Regards
JP

Similar Messages

Manage different layout according to Sales stage

Hi everybody,
I need to manage different opportunity layouts according to my sales stage.
How this need can be realizable?

Dynamic layouts are only possible on Opportunity for the field Opportunity Type. You could repurpose that field to allow for your different layouts, but I would consider that option very carefully before doing so. You need to be sure that repurposing that field won't negatively impact existing functionality.
I don't know what your requirements are, so I'm not certain about what you are trying to achieve. Be aware that you have some capability associated with Sales Processes that may be of use to you. You need to review the Sales Process functionality to see if it will help with your requirements at all.
Good Luck,
Thom

Account group for sales representative

Hi experts,
Is there any account group for sales representative in standard SAP?
Unlike customer do we need to create sales representative without account group?
If I want to use partner function sales representative, what is the process?
Thanks in advance
Shiv

Hi,
There is no account group for the sales representative in standard SAP. Instead u can use " employee responsible(ER)" partner function as a Sales Representative.
the same process u can opt. But here in partner determination u need to use for Sales Document Header . which is 2nd one in partner determination Procedure. u can see that but i think already exist in that procedure make it mandatory so that when ever the Sales Document of that type is raised then the system will ask u " employee responsible" person. ex: if u want to make for Standard Sales Order then u take the "TA" Partner Determination Procedure. and make as mandatory field for the partner function (ER).
the above said is one way and the another way is to take one partner function(sh,bp,py,etc) and copy it and put as "Sales Representative" and assign it to the partner determination procedure for the Customer and create the sales representative and assign it to the customer master . this way also u can work out..
I think these are sufficient to solve ur issue..
if u want other than this let me know..
Reward if Helpful..
Regards,
Praveen Kumar.D

How can I create multiple pages, with different layouts to the others, in DW fluid grid layouts?

Hi everyone, : )
I am creating a website using FGL in DW CS6, v12.0 build 5808. I do not have Creative Cloud (do you have to pay to use this service?).
I have created one layout for my home page.
I would like to create several more pages, but I want them to use different layouts (as well as different content).
I tried to do something similar before using 'save as' (this was with a non-FGL), but whenever I changed the original page that I had 'save as'd' from, the layout in all the other pages would change too!
I found a possibility from someone else online suggesting using a template, but have not tried it yet: http://www.linkedin.com/groups/Adding-second-fluid-page-in-119937.S.192422240
I'm a bit scared of breaking everything, as I am new to web design and have had to restart the whole process a few times due to messing up the fluid.css etc and other issues, so I am taking baby steps.
Happy to try whatever's suggested and, while I wait for (I hope) your responses, I think I will try the template thing, but from the reply the person who asked the question gave, it sounds like his subsequent pages changed too, as I mentioned above? *scared* ; )
If anyone can help me with this query I would be very grateful. Thank you! : )

Thanks David.
I tried using different IDs for the other pages, but eventually one of the divs seems to 'break' - it overlaps other divs, or cannot be moved or resized (you can select the outline and it goes blue, but no 'move up a row' or down a row or 'lock to grid' etc icons appear and it can't be drag-re-sized), plus the green overlay disappears (just from that div. I'm aware of how to turn visual aids on and off), so it seems broken. This often seems to happen if you rename a div once it's been created; it does not rename in the layout.css on the right side panel (CSS Styles) in DW and the 'broken' behaviour above is exhibited. Do you know anything about this? Is this the 'edit this doc at your peril' stuff that most tutorials seem to mention? Am I doing something wrong?
I also tried making an FGL and saving out the original boilerplate.css, layout.css and respond.js. Then created multiple new FGLs and each time it created new versions of layout.css (called 'untitled-1', 2 etc.). Once I had created all the FGLs, I deleted all the new boilerplates and untitled.css files. Then restored the original ones and changed the link at the top of each page's html to refer to the same filename (the original layout.css), rather than untitled.css. I thought this might work and it seemed to for a while, but then as I had to add new div names for the sections on each page, it eventually broke (as above).
Anyway, I think you have a good point about different layouts and it occurred to me also while I was exploring and waiting for replies here. I think I will make one layout for all pages and go with that. I have a couple of questions about that though:
1. I think the max number of divs I want for one of the pages is 10, but some pages need less divs. If I only fill e.g. 8 divs on one page, will the other ones be sat there empty? I think they will actually...I guess I'm asking because I have not tried it yet (will do after this) and it takes so long to do this trial and error.
2. If the amount of content in each div is different, e.g. let's say Page 1 has 6 lines of content in div1, but page 2 may have an unlimited amount of content (I will want to add to it in the future). Will this result in the div on page 1 being a huge block of empty space after its 6 lines?
Thanks so much for your help!

How do I create a automatic second page with different layout settings?

Hi there,
I want to create a business letter template with a different second page. I already managed to create a different layout on page nr two, but
whenever I write a letter with this template and I reach the end of page one, pages creates a thrid page in between my page nr one and nr two with a mixture of the layout of template page nr two and the footer of page nr one.
I want pages to take my template page nr two (with different header and footer) as second page instead of creating one itself.
If I don't need a second page - because my letter is to short - I should not have to delete a second page. It simply should not be there...
Thanks for Help!
G4's and 12" PB Mac OS X (10.4.6)

Hello Stefan,
you achieve this with a little trick. Create your letter and set the layout for the first and the second page by inserting a placeholder text. This placeholder text should fill the first page and the top of the second page, so both pages are build in one section. When the entire letter is layouted well, select the placeholder text and than save the letter as a template.
Now every time you open this template, you only have to insert the main text (replace the placeholder text with real content), and the second page disappears until the main text overflows the borders of the first page. Than you will get the second page again with the layout you have created for it.
I hope this will work for you like it works fine for me.

Creating Sales Order with reference to Quotation from different Sales Area

Hi,
I would like to inform you that our customer (GE ENERGY OC) from Europe have a requirement where they want to create sales orders with reference to quotation that is from different sales area. Standard SAP functionality doesn't allow this feature, hence requesting your help to give me an update in this regard.
Please treat this as urgent as they have to do business cutover where they are in the process of completing open sales orders.
Thanks
Ashfaq
Mobile: +91-98857-07558
E-Mail: [email protected]

Hi RadhaKrishna,
In standard system it is not possible to create sales order from a quotation whose sales are is different.
However I think this is possible by using some user exit in sales order. I have never tried this.
Regards
srini

Sales representative as created by

I am working with the system that is using the field 'Created by' for sales representative data field.
Why would someone configure their system to use this field rather than setting the Partner function?
Could this be changed in production? But then it would be changing the business process and not the system itself.

Hello Edna,
They have configured the partner function for sales representative and then created the user id using transaction SU01 for their sales representative in order to keep a track that which sales representative has created sales order.
They may be tracking as to decide the incentives or commision which they can give to them.
Like in insurance industry, there is a track to find out what target a particular representative has reached in order to decide on their incentives and commission.
Hope it helps.
Regards,
Priyanka

Create Sales Order with reference to Quote for different customer

HI Expert
Any idea how I may be able to do this?
Create Sales Order - for Customer B (VA01) with reference to a completed Quote for Customer A. While keeping the line items, quantity and pricing exactly the same.
Quote - Customer A -
> Sales Order - Customer B
Any suggestion will be greatly appreciated.
Thanks

HI
Go toT-Code VTAA , IN Header Level "Copy Requirements" Field Maintain Routine "002"
Go to VA01 , Enter the Order Type and press Enter and Enter the Sold to party , after that Sales Documents --> Create with Reference
Regards,
Prasanna

SALES REPRESENTATIVE DOWNLOAD

Hi
I have to download Sales Representative from ECC 5 to CRM 5.0
Its created in TX VPE1 not in HR master data.
Do any one can help on the step to follow.
Thanks
nitin

Anyone pls help on this issue.
Do I have to use HR integration note 550055, is there any way to avoid this.
Thanks
Nitin

Finding brand penetration per customer for sales representative

Material-Brand-----Sales-Rep----Customer
GW--XYZ--
Super-Cuts
SE--XYZ--
Super-Cuts
GW--XYZ--
Super-Cuts
SE--ABC--
Scissors
GW--ABC--
Scissors
Wella--ABC--
Scissors
Wella--XYZ--
Colors-and-Cuts-Salon
GW--XYZ--
Colors-and-Cuts-Salon
SE--XYZ--
Colors-and-Cuts-Salon
SE--ABC--
Planet-Beuty
Wella--ABC--
Planet-Beuty
Kadus--ABC--
Planet-Beuty
Clariol--ABC--
Planet-Beuty
SE--ABC--
Planet-Beuty
Clariol--ABC--
Planet-Beuty
Wella--XYZ--
Colors-and-Cuts-Salon
GW--XYZ--
Colors-and-Cuts-Salon
SE--XYZ--
Colors-and-Cuts-Salon
Clariol--XYZ--
Colors-and-Cuts-Salon
the requirement is to find the brand penetration which
is defined as average no of brands per customer for a sales representative.
in the above case XYZ is having two customer super cuts and color and salon
XYZ----
Brand pentration
Super-Cuts--     2--(NO-OF-DIFFERENT-BRAND)
Color-and-Cuts-Salon----
4
Average-Brand-Penetration-per-Account----
3
ABC----
Brand-Penetration
Planet-Beauty--4--(NO-OF-DIFFERENT-BRAND)
Scissors----
3
Average-Brand-Penetration-per-Account----
3.5
THE REPORT LAYOUT SHOULD BE
SALES-REP-----BRAND-PENTRATION
XYZ----
3
ABC----
3.5
HOW this requirement can be achieved in bex 3.5?
Edited by: Omprakash Mishra on Jun 27, 2008 5:53 AM

Hi praveen,
                 Actually this is much complex report .
                 there are many other complex key figures along with it .
                 i have just published a part of it as i am unable to find solution for it.
                 it is just an example so that people can understand it easily.

How do I use different Layouts?

I am trying to make a program that runs in a window like this:
http://www.exyt-web.com/Window.gif
The problem I'm having is with the layout.
How do I have more than one layout ?
For example - as you can see in the image (hyperlink above) I wish to have a border layout with a JFrame at the North position and then in the South position I want to have buttons laid out in a FlowLayout.
Also with my radio buttons I want these in a GridLayout(3, 0) layout.
I made up some example code to test using different layouts - but it seems one layout always overrides the other...
import java.awt.*;
import javax.swing.JFrame;
import javax.swing.JLabel;
public class LayoutTest extends JFrame
    public LayoutTest()
        setTitle("Hello World");
        Container contents = getContentPane();
        Container contents2 = getContentPane();
        contents.setLayout(new FlowLayout());
        contents.add(new JLabel("<FILTER [Type a th|    ]>"));
        contents.add(contents2);
        contents.add(new JLabel("< Filter Button >"));
        contents.add(new JLabel("< Add Button   >"));
        contents2.setLayout(new GridLayout());
        contents2.add(new JLabel("< Button 1 >"));
        contents2.add(new JLabel("< Button 2 >"));
        contents2.add(new JLabel("< Button 3 >"));
        contents2.add(new JLabel("< Button 4 >"));
        setDefaultCloseOperation(EXIT_ON_CLOSE);
        pack();
    } // HelloWorld
    public static void main(String [] args)
        LayoutTest theLayoutTest = new LayoutTest();
        theLayoutTest.show();
    } // main
} // class HelloWorldI know this obviously doesn't work but I hoped it would show what I was trying to do.
I also tried creating a new 'contents2' and then adding it into 'contents'
e.g. contents.add(contents2); My current code for the window I'm trying to create so far is:
import java.awt.*;
import javax.swing.*;
public class Menus extends JFrame
    public static void Menus()
        // Creates a new JFrame, with the title specified in quotation marks.
        JFrame frame = new JFrame("Film Database");
        // Sets the default close operation of the frame.
        frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
        // Creates a new menu bar for the frame.
        JMenuBar menuBar = new JMenuBar();
        // Creates a new menu for the menu bar.
        JMenu menu = new JMenu("File");
        addFrameContents(frame, menuBar, menu);
        // Sets the new menu bar on the frame
        frame.setJMenuBar(menuBar);
        frame.pack();
        frame.setVisible(true);
    } // HelloWorld
    public static void addFrameContents(JFrame frame, JMenuBar menuBar, JMenu menu)
        // Adds the menu to the menu bar.
        menuBar.add(menu);
        // Creates a new item for the menu with a small icon.
        JMenuItem menuLoad = new JMenuItem("Load", new ImageIcon("C:/load.gif"));
        // Adds the new item to the menu.
        menu.add(menuLoad);
        JMenuItem menuSave = new JMenuItem("Save", new ImageIcon("C:/save.gif"));
        menu.add(menuSave);
        JMenuItem menuQuit = new JMenuItem("Quit", new ImageIcon("C:/quit.gif"));
        menu.add(menuQuit);
        // Creates a new container.
        Container contents = frame.getContentPane();
        // Sets a new layout for contents, in this case FlowLayout.
        contents.setLayout(new GridLayout(2, 0));
        // Adds new JLabels to the container.
        contents.add(new JLabel("< JLabel 1 >"));
        contents.add(new JLabel("< JLabel 2 >"));
        contents.add(new JLabel("< JLabel 3 >"));
        contents.add(new JLabel("< JLabel 4 >"));
        JLabel thisLabel = new JLabel("Hello");
        thisLabel.setLayout(new FlowLayout());
        JLabel thisLabel2 = new JLabel("Hello2");
        thisLabel2.setLayout(new FlowLayout());
        contents.add(thisLabel);
        contents.add(thisLabel2);
    public static void main(String [] args)
        Menus();
    } // main
} // class HelloWorldAny help on how I can use two separate layouts in the same frame would be great!
Regards,
Tom

doing this:
Container contents = getContentPane();
Container contents2 = getContentPane();
does not create 2 different containers. It's just creating 2 variables that refer to the same container. There is only 1 content pane in a window/frame. A container can only have 1 layout.
If you want to have 2 layouts, you create 2 panels with separate layouts and put what you want in each panel, and put both panels in the content page.

Creating sale order by using BAPI

Hi,
My requirement is to create a inquiry(VA11), By using the Inquiry no as a input in report, i should create a salesorder using BAPI in which the datas should be flowed from inquiry to sale order. i did almost everything except the Pricing Condition.
I am fetching the pricing condition values from table KONV-KSCHL and passing the value via BAPI_SALESORDER_CREATEFROMDAT2 it creates saleorder. In the created salesorder, there are two same pricing conditions but different rate 1.) the price of the MATNR which is maintained 2.) the changed MATNR price in inquiry level,
i need the value which is changed in inquiry level that is 2nd value.
can anyone help me in this...

REPORT ZSALESORDER.
<< Cut and paste without attribution from
create sales order using BAPI
removed >>
Edited by: Rob Burbank on Feb 24, 2009 10:43 AM

Dynamic Headers in ALV Based on Different layouts

Hi Experts,
I Have a requirement in an ALV Report wherein After the report run as the user chooses different layouts from saved ones the ALV header should change accordingly.
I'm using Function modules to write the ALV.
First of all , is it possible? and if yes how?
Thanks,
Sachin Soni

hi rohit ,
thanks for replying but i think ppl have not understood it clearly.
I'm not asking about the variants which the user saves before calling the report but rather the layout which after the report run user creates based on what columns he wishes to see at that moment.
thanks
sachin soni

PL/SQL API for Creating Sales Order

Hi,
I am new to Oracle SOA 11g.
I have done the Deleting Sales Order using PL/SQL API ( Oracle Apps Adapter ) [ API Name: OE_ORDER_PUB.DELETE_ORDER ] in SOA BPEL. While executing the BPEL, it is correctly deleting Sales Order in E Business Suite which is created in EBS User Interface. I don't face any problem while deleting the sales order.
Now, in same way, I have to create a new Sales Order using PL/SQL API in SOA-BPEL. I don't find any API's related to creating Sales Order in Order Management Suite (OM_PF) -->Order Management (ONT) --> Sales Order (ONT_SALES_ORDER) --> PL/SQL --> Process Order API (OE_ORDER_PUB) in Module Browser.
Please tell me which PL/SQL API to use to create new Sales Order in BPEL.
Thanks,
-- Gowtham
Edited by: user8223943 on Feb 16, 2012 7:38 AM

You may be on a different patch level. Can you ensure that you have applied all latest patches for your version?
See sample code at http://jyotioraapps.blogspot.com/2009/08/use-of-oeorderpubprocessorder-to-create.html
Hope this helps,
Sandeep Gandhi

PL/SQL API for Creating Sales Order in E Business Suite from BPEL

Hi,
I am new to Oracle SOA 11g.
I have done the Deleting Sales Order using PL/SQL API ( Oracle Apps Adapter ) [ API Name: OE_ORDER_PUB.DELETE_ORDER ]. While executing the BPEL, it is correctly deleting Sales Order in E Business Suite which is created EBS User Interface. I don't face any problem while deleting the sales order.
Now, in same way, I have to create a new Sales Order using PL/SQL API. I don't find any API's related to creating Sales Order in Order Management Suite (OM_PF) -->Order Management (ONT) --> Sales Order (ONT_SALES_ORDER) --> PL/SQL --> Process Order API (OE_ORDER_PUB) in Module Browser.
Please tell me which PL/SQL API to use to create new Sales Order in BPEL.
Thanks,
-- Gowtham

You may be on a different patch level. Can you ensure that you have applied all latest patches for your version?
See sample code at http://jyotioraapps.blogspot.com/2009/08/use-of-oeorderpubprocessorder-to-create.html
Hope this helps,
Sandeep Gandhi

VPE1 - Different layout in Create Sales Representative

Similar Messages

Maybe you are looking for