VPN-3DES-AES: Disabled feature

Hello all,
I have an ASA that I will like to enable the VPN-3DES-AES license. Unfortunately, we have been using this device for the past few years and the supplier did not supply us with the SKU PAK (white sheet that comes with the box). Is there a way that I can enable this feature?
Thanks alot.
Licensed features for this platform:
Maximum Physical Interfaces  : Unlimited
Maximum VLANs                : 100
Inside Hosts                 : Unlimited
Failover                     : Active/Active
VPN-DES                      : Enabled
VPN-3DES-AES                 : Disabled

You get the license free of charge on www.cisco.com/go/license.
Under "Get new" you choose ASA, provide your serial# and contact, and some minutes later you have the license in your inbox.
Don't stop after you've improved your network! Improve the world by lending money to the working poor:
http://www.kiva.org/invitedby/karsteni

Similar Messages

  • Enabling VPN-3Des-AES

    Hello!
    I need to enable VPN-3DES-AES on an ASA5540.  Show version provided this info below. 
    Licensed features for this platform:
    Maximum Physical Interfaces  : Unlimited
    Maximum VLANs                : 200
    Inside Hosts                 : Unlimited
    Failover                     : Active/Active
    VPN-DES                      : Enabled
    VPN-3DES-AES                 : Disabled
    Security Contexts            : 2
    GTP/GPRS                     : Disabled
    VPN Peers                    : 5000
    WebVPN Peers                 : 2
    AnyConnect for Mobile        : Disabled
    AnyConnect for Linksys phone : Disabled
    Advanced Endpoint Assessment : Disabled
    UC Proxy Sessions            : 2
    This platform has an ASA 5540 VPN Premium license.
    After doing some poking around I came across a link to request a free license but when the email came it warned that the requested license was lower than one currently assigned to the serial number provided.  I do not have any of the old license information since this was set up years ago and was way before my time with the company.  Can anyone point me in the right direction on how to enable the feature as well as maintaining my vpn premium license features. 
    Thanks,
    Andrew

    Below is info from the email with the key.  It keeps referring to PIX OX6.1.  The ASA is running ASA 8.0(4).  Is this going to be a problem or are the pix references just there because this key has been needed to activate the strong encryption since the pix days?  Also is the process going to be the same for an asa?  Will I still need a reboot?  Thanks for all the help!
    Platform = asa
    Installing Your PIX Firewall Activation Key
    Note:  On systems running PIX OS 6.2 and higher, you may enter the new activation key via the activation-key command.  A reboot will be necessary to have the change take effect.  On systems running PIX OS 6.1 and earlier, a software image must be downloaded to the PIX Firewall in monitor mode in order to enter the new activation key.
    Step 1.  Back up your PIX Firewall configuration.  Use the tftp-server command with the "write net" command to store your configuration on a TFTP server.  Or, use the "write terminal" command to list your configuration and then cut and paste it into a text editing application on your console.
    Step 2.  Follow the directions applicable to your version and PIX Firewall model number for installing  a new software and entering a new activation key.  Refer to the PIX Firewall documentation at the following site:
    http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/index.htm
    Step 3.  If prompted to "install a new image," enter y.
    Step 4.  When prompted to "enter new key," enter y.
    Step 5.  When prompted, enter each of the four key values (Do not enter spaces in the key value).
    Step 6.  Use the "show version" command to view the new features enabled by the key.

  • Getting a VPN-3DES-AES Key for PIX515E

    Hi all.
    I have a PIX 515E UR which I would like to activate the VPN-3DES-AES license. I did find a link to register the license, but after following the link and logging into my old CCO account i found that as I didn't have access to anything, so couldn't complete the procedure.
    Is there any way that I can get the license activated? I bought the unit from a Cisco partner quite some time ago, but never needed the 3DES license. Now I do. Can anyone suggest anything or help in any way please?
    Thanks

    Hi,
    You should be able to get it from the Cisco site.
    www.cisco.com/go/license
    Which might open
    https://tools.cisco.com/SWIFT/LicensingUI/Home
    From where you click the button for "Continue to Product License Registration"
    From the opening page "Get New"(dropdown menu) -> "IPS, Crypto, Other Licenses"
    From there "Security Products" -> "Cisco PIX Security Appliance 3DES/AES License"
    And there you should be able to fill in the required information.
    It has changed from the last time I did it so I am not sure if theres anything more to it. But I have had no problem getting this for old PIX firewalls previously
    - Jouni

  • After made upgrade license i lost 3DES-AES

    Hey men,
    so i have 2 ASA 5510, and i applied a Security Plus License in one, but after this my license VPN-3DES-AES goes to Disabled.
    Anyone knows something as i can do to change to enable? Because in Base License i had this option after apply plus no more.
    Thanks,

    Hi Raj,
    Please see the link below :
    https://supportforums.cisco.com/document/67701/asa-versions-image-names-and-licensing
    and visit section FREE 3DES/AES license. Go to the that link, follow the steps and get the activation key. Once you have the new activation key, put it in ASA and it should be enabled.
    {config)# activation-key xxxx xxxx xxxx xxxxx
    Regards,
    Kanwal
    Note: Please mark answers if they are helpful.

  • Disabled Features

    I am trying to install a new printer that I bought last year (because it matches the 3 other printeres I have). I just recently tried to download the drivers from the disk that came with the printer. I realize that the drivers needed to be updated, so I downloaded the drivers from HP website for my HP Officejet Pro 8600.
    Issue 1. I keep getting a message during the download that states "Disabled Features- an adminstrator has disabled some features of the selected device. For more information, check with an adminstrator o rconsult the device documentation."
    Issue 2. After finishing the install, and attempting to print, I get blank spacing where words should be printed, intermittently throughout the whole document.
    Question- Is this caused by the "disabled feature" warning? If so, how do I correct it? If not caused by the "Disabled Features" warning, how do I fix it?
    (FYI: I have uninstalled, and then reinstalled the drivers from the HP website 2x already, and attempted to reinstall from the disk that came with the printer) 

    Hi there @scooter7381 ,
    Welcome to the forums!
    I would like to help with the printer and printing issues you're facing with your Officejet 8600 connected to your Mac running 10.9.
    I would like to know the following:
    At which point of the installation do you see the message "Disabled Features, an administrator has disabled some features of the selected device", during the download, before the install starts, during, or at the end, for example?
    How are you connecting the printer to your Mac (USB, Wireless, Ethernet)?
    Can you print a quality page and let me know if there was an issue with the quality of the page or if it printed? (Select Setup, Reports, Print Quality Report)
    Include any steps you have tried as well.
    Have a great weekend
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Way to enable the Webkit disabled features in non-application sandbox?

    Are there any plans to re-enable the webkit-disabled features at least for the non-application sandboxes?   For example - if you have an iframe that is hosting a pure html5 application, then it would be nice to use the html5 application cache feature, this way we do not have to write custom code to use the air/flash version of persisted storage.  
    In other words: Is it in your roadmap to provide a sandbox that can run with all webkit features enabled?  Such that a pure HTML5 app can be written and deployed on the web and via air.

    Interesting question - thanks for asking it.
    -Chris

  • 3DES/AES licence for ASA5520

    Hi everybody,
    I have an ASA 5520 K8 with a smartnet contract, how can I proceed to get K9 software so that I will be able to use 3DES/AES encryption key.
    Thanks a lot in advandce

    As long as you are not in a proscribed country, you can just go to this page:
    https://tools.cisco.com/SWIFT/LicensingUI/ipsCryptoPage
    ...and provide your product serial number. You will be sent an activation code that will have instructions for activation included.

  • How do I tell Apple to fix their software like apps that play sound even though the sound is turned off and not being able to disable features you hate like game center

    Apple is suppose to be the pinnacle of usability and, yet, I want to throw my new IPhone 4s as far as I can and watch is smash into a million pieces on concrete. Seriously, I've already got three things that irritate the **** out of me. First, there are Apple apps that insist on playing sound even though the sound is turned off. If I flick a switch to turn the sound off, I want the sound off!!!! Second, if I do not want a totally unnecessary feature like Game Center, I should be able to disable it. I completed most of the Angry Bird levels with 2 or 3 stars and now I have to start over from square one. Maybe, this happened when I upgraded to the 4s but it sure seemed to happen when I joined Game Center. Tomorrow, I am going to reset my 4s to factory defaults to try to get rid of my Game Center account. I don't want Game Center! I do need Game Center! I hate Game Center! Finally, I had an alarm go off to wake me up and there was a Snooze button but no button to turn the alarm off. I flicked the slider to access the main screen expecting to see something to turn the alarm off but there was nothing. The alarm just kept alarming. I had to warm boot my IPhone to shut the alarm off! Really, Apple!!!!

    The sound is turned off. Only, some Apple apps like YouTube and Siri make sound when the sound is turned off. It is very embarrassing when this happens at work. My question was how do I tell Apple to fix this?
    Turning off game center does not work. The games just prompt me to sign in when they are started.I have tried everything I can find online to stop this behavior. It is annoying and should not happen. My question was how do I tell Apple to fix this?
    The alarm went off. There was a green thing that looked like a button but pressing it did nothing. There was a red button that said snooze. I did not want to snooze. I wanted to turn the alarm off. I slid the bar to unlock the phone and there were no running apps with a button to press. The alarm just keep running. I have not had this problem since it first occurred. The alarm now shuts off when I just unlock the phone. It may have happened because I had another alarm app running. The two may have interfered with each other. I would like to tell Apple about it.
    It also annoys me that the button that closes apps leaves the phone app running. If I press on a number at 6:00 AM to get information about who called me, the phone automatically dials the person back and my natural reaction is to press on the button to close the phone app but the phone keeps dialing this person at 6:00 AM. It is a bad design. I would like to tell Apple about it.
    Finally, I looked all over Apple's site to try to find someplace I could send them a polite message to let them know that I was not happy with these "features" but could not find anything. It is extremely frustrating to have issues with a product and not being able to tell the manufacturer about it. So, you grow up!.
    When trying to fix the Game Center issue, I saw a link someone posted to report issues with the IPad to Apple. The answer I am looking for is where is the link to report issues with the IPhone.

  • Since I disabled features in the people widget, I cannot access gmail

    I was so annoyed at the people widget covering up my emails that I disabled all the features IN it instead of the whole widget (which I have since learned how to do) and now I cannot access gmail with firefox. I can with internet explorer though, but prefer to use firefox.

    -> Tap '''ALT''' key or press '''F10''' to show the Menu Bar
    -> go to Help Menu -> select '''Restart with Add-ons Disabled'''
    Firefox will close then it will open up with just basic Firefox. Now do this:
    -> Update ALL your Firefox Plug-ins https://www.mozilla.com/en-US/plugincheck/
    -> go to View Menu -> Toolbars -> unselect All Unwanted/Incompatible Toolbars
    -> go to Tools Menu -> Clear Recent History -> '''Time range to clear: select "EVERYTHING"''' -> click Details (small arrow) button -> place Checkmarks on '''Cookies, Cache''' -> click '''Clear Now'''
    -> go to Tools Menu -> Options -> General -> in '''Startup''' section click '''Reset to Default''' button
    -> go to Tools Menu -> Options -> Content -> place Checkmarks on:
    1) Block Pop-up windows 2) Load images automatically 3) Enable JavaScript
    -> go to Tools Menu -> Options -> Security -> place Checkmarks on:
    1) Warn me when sites try to install add-ons 2) Block reported attack sites 3) Block reported web forgeries 4) Remember Passwords for sites
    -> go to Tools Menu -> Options -> Advanced -> Network -> Offline Storage (Cache): click '''Clear Now''' button
    -> Click OK on Options window
    -> click the Favicon on SearchBar -> click '''Manage Search Engines''' -> select all Unwanted Search Engines and click '''Remove''' -> click OK
    -> go to Tools Menu -> Add-ons -> Extensions section -> REMOVE All Unwanted/Suspicious/Incompatible Extensions (Add-ons) -> Restart Firefox
    -> go to Tools Menu -> Add-ons -> Appearance section -> REMOVE All Unwanted/Suspicious/Incompatible Themes (Persona) -> Restart Firefox
    You can enable your Known & Trustworthy Add-ons and Themes later. Check and tell if its working.

  • Touch pad disable feature

    On the HP ENVY 4 Notebook PC There is a  feature which  disables and re-enables the touchpad by tapping twice in the top left-hand corner (where there is a small grey rectangle to indicate the position to tap to tun the touchpad off and on). What is the procedure for disabling this feature? (I find I often accidentally disable the touchpad accidentally and would rather the feature was switched off)
    This question was solved.
    View Solution.

    Hi,
    Open windows Control Panel and open Synaptics ( you can also access this via Mouse....Settings tab....Settings button ).  The option you need to disable is' 'Double tap to disable touchpad' - the exact location of this setting can vary depending on the Synaptics version you have and to some degree the hardware.  An example of its location in Synaptics 8.1 can be seen in the image below - just remove the highlighted check mark, click Close and then Click Apply.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Disabling Features Permanently

    I work in a Graphics Department and I have an annoying boss who doesn't seem to understand what's so wrong with playing his iTunes radio really loud for everyone to hear. I'm generally pretty knowledgeable when it comes to figuring things like this out, but strictly on PC's mostly. We use Macs in our department and I'm just not as familiar with the inner workings of them as I'd like to be.
    So my question is, is there anyway to permanently disable the Radio feature in iTunes without setting Parental Controls? Is there some file or setting I can change to just cause the Radio not to work at all? Or even go as far as block some ports to prevent it from connecting?
    Don't know if I'm breaking any forums rules or anything by posting this, but not really intending to do any harm. Just to save our ears from crappy music.

    Edit the user form you are using and check the "No Default Buttons" option (in BPE)
    or if editing the XML should look like below
    <Form name='Tabbed User Form' help='account/modify-help.xml' noDefaultButtons='true' objectLocationID=........>
    This will remove ALL default buttons, so you will have to explicitly add the buttons you would like to have in the form as part of the form code.

  • Disabled feature: member template classes

    According to the FAQ http://wwws.sun.com/software/sundev/suncc/faqs/cpp.html#3q2
    Q. What standard library functionality is missing from libCstd?
    A. The standard library was originally (in C++ 5.0) built without support for features which required member template and partial specialization in the compiler. Although these features have been available since C++ 5.1, they cannot be turned on in the standard library because they would compromise backward compatibility.
    Backward compatibility is a nice thing, but wouldn't it be a better strategy to be by default
    standard compliant, and tell the user to #define SUN_CC_NO_PARTIAL_SPECIALIZATION 1
    if the user has the need for backward compatibility.
    Andreas

    I have to come back to this problem. This member templates disabling makes that
    template <class Comp>
    std::list<T::sort(Comp)
    is not defined. When I had a look at the source code of the Sun STL I saw that you
    nevetheless offer a version of sort where one can supply a function pointer to do
    the comparison of two items in the list.
    1. Wouldn't it make sens to document that, so that when one wants to sort at
    least one knows about aq workaround?
    2. Also can you explain me, what binary compatibility would break if this particular
    function was enabled. It can't be there, and I have the impression that you switched
    off too much, that is there will be some functions that really MUST be disabled,
    whereas others don't do harm, but there is no preprocessor switch to distinguish
    between them.
    Best regards,
    Andreas

  • How to disable feature for Message box occures when pagetimes out. We get message "Stay on Page" & "Leave Page". How to disable this?

    Hello,
    I want do disable message box comes after default page times out. Such that it asks for to "stay on page " or "Leave page". i want it should be directly redirected to default setting which i have done.

    If you still have an iPhone handy and have the SIM card you used for the phone, then temporarily put your SIM into the other phone and go into Settings and turn of iMessage. If not, the only alternative that I know of is the Support profile, However, you may what to search the More Like This section on the right side of the thread to see if any of the entries there have a green checkmark meaning they are answered.

  • Photoshop glitches my screen and disables features

    Hi guys, I need some help. I was using Photoshop last night with no problem. However, when I opened it this morning, this happened. That small white square is the canvas and most of photoshop's features no longer work. That giant white L-shape is actually cutting off my entire viewing area. However, often times that white shape isn't white at all, but extremely glitchy. Case in point...
    I can't think of anything that would've done this. The only thing that's been done to my Mac since last night is that I did a system software update. That's it. Does anybody know what's going on or seen something similar? This makes Photoshop completely unusable.

    So I did that and it didn't work, though now I'm seeing more random things in that glitchy area, including stuff from my desktop that seems to slightly affect how I view the document if clicked.
    I am really confused...
    How do I check the console?

  • Safari update need to disable feature

    Ever since I got the latest safari update, when I start typing a domain to visit safari brings up suggestive sites to visit as I type and I keep getting directed to different places unless I type the entire domain name. How can I turn this feature OFF?

    HI,
    You can turn on Private Browsing for a temporary work around. From the Safari Menu Bar click Safari/Private Browsing.
    You'll see a pop up dialog explaining exactly what Private Browsing does.
    Carolyn

Maybe you are looking for