VPN Access via LDAP authentication

Hello everyone,
I have setup an OS X server to serve as our department's VPN server. I am attempting to configure it to use an existing linux LDAP server for authentication, so that we don't need to have local accounts on the server. In the Directory Utility I have entered the information to point to our LDAP, and have it configured as RFC 2307 (Unix) for LDAP mappings. Everything in the Directory Utility appears that it considers the LDAP connection to be valid. In fact, from a terminal I can successfully finger users in LDAP.
In the Server Admin, I have selected the users that I wish to have VPN access (the LDAP users also show up in this list). However, when I try to connect to it, it fails almost immediately. Here is a snippet of the server's VPN log file (I have changed the IP addresses and hostname in the logfile to "*"):
2010-05-11 20:37:13 EDT Incoming call... Address given to client = **.***.***.**
Tue May 11 20:37:14 2010 : Directory Services Authentication plugin initialized
Tue May 11 20:37:14 2010 : Directory Services Authorization plugin initialized
Tue May 11 20:37:14 2010 : PPTP incoming call in progress from '**.***.***.**'...
Tue May 11 20:37:14 2010 : PPTP connection established.
Tue May 11 20:37:14 2010 : using link 0
Tue May 11 20:37:14 2010 : Using interface ppp0
Tue May 11 20:37:14 2010 : Connect: ppp0 <--> socket[34:17]
Tue May 11 20:37:14 2010 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0xaef8a1b5> <pcomp> <accomp>]
Tue May 11 20:37:14 2010 : rcvd [LCP ConfAck id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0xaef8a1b5> <pcomp> <accomp>]
Tue May 11 20:37:17 2010 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0xaef8a1b5> <pcomp> <accomp>]
Tue May 11 20:37:17 2010 : rcvd [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x1b8adf3d> <pcomp> <accomp>]
Tue May 11 20:37:17 2010 : lcp_reqci: returning CONFACK.
Tue May 11 20:37:17 2010 : sent [LCP ConfAck id=0x1 <asyncmap 0x0> <magic 0x1b8adf3d> <pcomp> <accomp>]
Tue May 11 20:37:17 2010 : rcvd [LCP ConfAck id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0xaef8a1b5> <pcomp> <accomp>]
Tue May 11 20:37:17 2010 : sent [LCP EchoReq id=0x0 magic=0xaef8a1b5]
Tue May 11 20:37:17 2010 : sent [CHAP Challenge id=0xc6 <7636b1bad668b175a847d43875397f99>, name = "***.*****.edu"]
Tue May 11 20:37:17 2010 : rcvd [LCP EchoReq id=0x0 magic=0x1b8adf3d]
Tue May 11 20:37:17 2010 : sent [LCP EchoRep id=0x0 magic=0xaef8a1b5]
Tue May 11 20:37:17 2010 : rcvd [LCP EchoRep id=0x0 magic=0x1b8adf3d]
Tue May 11 20:37:17 2010 : rcvd [CHAP Response id=0xc6 <4a2f0f54d4ce55fe6d1308a8206c4b02000000000000000046f6233c5bb9ea82f6ef2164eb55ed a3355a931a6762101300>, name = "mouck"]
Tue May 11 20:37:17 2010 : sent [CHAP Failure id=0xc6 "\37777777677:\r\002"]
Tue May 11 20:37:17 2010 : CHAP peer authentication failed for mouck
Tue May 11 20:37:17 2010 : sent [LCP TermReq id=0x2 "Authentication failed"]
Tue May 11 20:37:17 2010 : rcvd [LCP TermReq id=0x2 "Failed to authenticate ourselves to peer"]
Tue May 11 20:37:17 2010 : sent [LCP TermAck id=0x2]
Tue May 11 20:37:17 2010 : Connection terminated.
Tue May 11 20:37:17 2010 : PPTP disconnecting...
Tue May 11 20:37:17 2010 : PPTP disconnected
I am unsure why the authentication is not working. In the past, I have tried to configure the Open Directory service to be "Connected to a Directory System" but could never get the service to start. To be honest, I'm not even positive I need to have the Open Directory service running, since the authentication should hopefully be passed to our existing LDAP.
Any thoughts or suggestions would be greatly appreciated. Thanks very much!

Hi oleg,
It's a very common issue and generally happens when you try to connect the VPN client from the same location which has a site to site VPN with the device. For example if you try to connect the VPN client to the ASA and your public Ip is 1.1.1.1 and on the same ASA if you have a Site to Site VPN already connnect with an IP address 1.1.1.1 you will see the following error in the debug:
"cannot match peerless map when peer found in previous map entry."
Please check for the same, if thats the case you are hitting the following bug:
http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCuc75090
You needed a Cisco CCO id to check the link.
Thanks
Jeet Kumar

Similar Messages

Document Access via Custom Authentication Source?

I don't know if this should be under the 'Content Services' forum or this one, so I'll start here. I have a custom content crawler that crawls documents stored in a database. That works fine, but now I want to integrate access control into the equation. The documents that I retrieve have metadata associated with them (i.e. the users/groups from the document repository that have access to the document). Every ALUI portal user has an associated user with the same name in the document repository. I want to set things up so users can only see/view documents that they are allowed to see/view. I'm wondering if I need to create a custom authentication source to get these users/groups integrated into the portal. We already are doing Single Sign-On, but I need to know what needs to be done to pass user/group info from the document repository to the portal. Any thoughts would be appreciated.

Hi Jake,
I am also trying to achieve the same functionality. I have written a custom crawler and I am having the ACL's that contains the read/write etc permissions for the users and groups, but I am not able to find out how I can pass this information using custom cralwer interfaces. If you have got solution to your query please let me know the approach ASAP. Thanks in Advance.
Viren

Securing AnyConnect VPN user access via specific LDAP groups in Active Directory?

Is there a brief tutorial on how to secure AnyConnect VPN access using Active Directoty security groups?
I have AAA LDAP authentication working on my ASA5510, to authenticate users against my internal AD 2008 R2 server, but the piece I'm missing is how to lock down access to AnyConnect users ONLY if they are a member of a specific Security Group (i.e. VPNUsers) within my AD schema.

This looks fairly complete
http://www.compressedmatter.com/guides/2010/8/19/cisco-asa-ldap-authentication-authorization-for-vpn-clients.html
Sent from Cisco Technical Support iPad App

ASA VPN with LDAP authentication

We currently use a Cisco ASA (5510, 8.2) IPsec VPN client with RADIUS as a backend authentication service. We have configured IAS on one of our domain controllers to issue a RADIUS Accept/Deny based on the users' group membership within a "VPN Users" group. The IAS policy rules makes this very easy (it understands Windows group membership), and we like using groups because it is easy to send mail to all VPN users.
The things we don't like about using RADIUS is the idea that IAS has to be configured as a middleman service, and sometimes IAS does not always successfully start after a system reboot (we are not sure why).
We were wondering if it was possible to skip the middleman and use LDAP directly, pointing to our pool of domain controllers. There are many LDAP examples out on the net, but they consist of using an LDAP Attribute map to either use the "Remote Access Permission" of the user's DialIn profile, or by associating an AD group to a Cisco policy.
The former does not fit our model because it bypasses the group membership concept and requires VPN control via profile. The latter does not fit because, while we do have a "VPN Users" group to map in the affirmative, we do not have an inverse to map to a Deny policy. There is no "NOT" logical operator in the LDAP Attribute mapping.
Does anyone know a way to accomplish what we are after, using LDAP rather than RADIUS, where a single group can determine Accept (and more importantly, absence equals Deny)?

Hi,
I believe that second option you've mentioned will work for you. Why? using that if you map single AD group to right cisco policy. then this will work the way you want; where absence means deny to other users.
Here is con fig example you may try:
Configuration for restricting access to a particular windows group on AD/LDAP
group-policy noaccess internal
group-policy noaccess attributes
vpn-simultaneous-logins 0
address-pools none
ldap attribute-map LDAP-MAP
map-name memberOf IETF-Radius-Class
map-value memberOf
aaa-server LDAP-AD protocol ldap
aaa-server LDAP-AD host
server-port 389
ldap-base-dn
ldap-scope subtree
ldap-naming-attribute sAMAccountName
ldap-login-dn
ldap-login-password
server-type microsoft
ldap-attribute-map LDAP-MAP
group-policy internal
group-policy attributes
vpn-simultaneous-logins 3
vpn-tunnel-protocol IPSec l2tp-ipsec ...
address-pools value
tunnel-group type remote-access
tunnel-group general-attributes
authentication-server-group LDAP-AD
default-group-policy noaccess
HTH
JK
-Plz rate helpful posts-

Help with ios LDAP setup for VPN access

I am trying to move Microsoft LDAP for my vpn setup to an ISR router with 15.1 code . It has support but very little doccumentation. Anyone configured this before? i need some help or basic config.

Ldap authentication started from 7.1 if I recall correctly along with LDAP mapping which helps you validate whether the user has the dial in attribute on or of. I would say starting from 7.1 till the latest 8.X version.
Version 6.X does not have this feature.

Problem with LDAP authentication for users in a group

I've gone through several forums attempting to find a solution, but I still can't get authentication to work for users in a particular group within AD. Our ASA is running 9.1(2), and the domain controller is a Windows Server 2012 R2.
I can configure the VPN connection, so that all users can authenticate just fine; however, when I setup the group, there appears to be success, but I'm reprompted to authenticate, and it eventually fails:
[6707] memberOf: value = CN=VPN Access,OU=COMPANY Groups,DC=COMPANY,DC=com
[6707] mapped to IETF-Radius-Class: value = GroupPolicy_COMPANY_SSL_VPN
[6707] mapped to LDAP-Class: value = GroupPolicy_COMPANY_SSL_VPN
[6707] msNPAllowDialin: value = TRUE
I'd be grateful if anyone can point me into the right direction and show me what I'm doing wrong. Thank you.
ldap attribute-map AuthUsers
map-name memberOf IETF-Radius-Class
map-value memberOf "CN=VPN Access,OU=COMPANY Groups,DC=COMPANY,DC=com" GroupPolicy_COMPANY_SSL_VPN
aaa-server LDAP protocol ldap
aaa-server LDAP (COMPANY_PROD_INTERNAL) host 10.10.100.110
ldap-base-dn DC=COMPANY,DC=com
ldap-scope subtree
ldap-naming-attribute sAMAccountName
ldap-login-password *****
ldap-login-dn CN=LDAPAuth,CN=Users,DC=COMPANY,DC=com
server-type microsoft
ldap-attribute-map AuthUsers
group-policy NOACCESS internal
group-policy NOACCESS attributes
vpn-simultaneous-logins 0
vpn-tunnel-protocol ikev1 ssl-client ssl-clientless
webvpn
anyconnect ask none default anyconnect
group-policy GroupPolicy_COMPANY_SSL_VPN internal
group-policy GroupPolicy_COMPANY_SSL_VPN attributes
wins-server none
dns-server value 10.10.100.102
vpn-tunnel-protocol ikev1 ikev2 ssl-client
split-tunnel-policy tunnelspecified
split-tunnel-network-list value SPLIT-TUNNEL
default-domain value net.COMPANY.com
webvpn
anyconnect profiles value COMPANY_SSL_VPN_client_profile type user
tunnel-group COMPANY_SSL_VPN type remote-access
tunnel-group COMPANY_SSL_VPN general-attributes
address-pool COMPANY-SSL-VPN-POOL
authentication-server-group LDAP
authorization-server-group LDAP
authorization-server-group (COMPANY_PROD_INTERNAL) LDAP
default-group-policy NOACCESS
authorization-required
tunnel-group COMPANY_SSL_VPN webvpn-attributes
group-alias COMPANY_SSL_VPN enable
tunnel-group COMPANY_SSL_VPN ipsec-attributes
ikev1 pre-shared-key *****

I just figured it out. Under "group-policy GroupPolicy_COMPANY_SSL_VPN attributes", I had to add "vpn-simultaneous-logins 15". Apparently, it was using the value "vpn-simultaneous-logins 0" under the NOACCESS group policy.

ASA 8.2.5 LDAP authentication by memberof doesn't always work

I've configured LDAP authentication to allow access if members are a member of the "VPN_Users" Group. This configuration is working, but only for some users. For other users it isn't. The output of the 'debug ldap 255' shows an output of memberOf for the users that it's working for, but shows nothing for users it's not working for.   I've not been able to figure out any connection or differences that are the same between those users that work and those that don't. Any idea on what might be causing this problem? Both working and non-working users will authenticate, its just some of them don't pull the memberof data in the ldap query.
Config:
aaa-server AD protocol ldap
aaa-server AD (inside) host btfs2
ldap-base-dn dc=localdomain,dc=com
ldap-scope subtree
ldap-naming-attribute samAccountName
ldap-login-password *****
ldap-login-dn [email protected]
server-type microsoft
ldap-attribute-map VPNGroup
ldap attribute-map VPNGroup
map-name memberOf IETF-Radius-Class
map-value memberOf "CN=VPN_Users,OU=Security Groups,OU=Company OU,DC=localdomain,DC=com" btvpn
group-policy NOACCESS internal
group-policy NOACCESS attributes
vpn-simultaneous-logins 0
vpn-tunnel-protocol IPSec svc
webvpn
svc ask none default svc
group-policy btvpn internal
group-policy btvpn attributes
banner value This is a private data network. All connections are logged and are subject to
banner value monitoring. Unauthorized access is prohibited and will be prosecuted.
dns-server value 10.0.0.x 10.0.0.y
vpn-simultaneous-logins 10
vpn-tunnel-protocol IPSec l2tp-ipsec svc
split-tunnel-policy tunnelspecified
split-tunnel-network-list value splittun
default-domain value localdomain.com
webvpn
svc keep-installer installed
svc rekey time 120
svc rekey method ssl
svc ask enable default svc
tunnel-group btvpn type remote-access
tunnel-group btvpn general-attributes
address-pool vpnpool
authentication-server-group AD LOCAL
default-group-policy NOACCESS
tunnel-group btvpn webvpn-attributes
group-alias webvpn enable
tunnel-group btvpn ipsec-attributes
pre-shared-key *****
Non-working user:
[1575] Session Start
[1575] New request Session, context 0xd7fbf210, reqType = Authentication
[1575] Fiber started
[1575] Creating LDAP context with uri=ldap://10.0.0.x:389
[1575] Connect to LDAP server: ldap://10.0.0.x:389, status = Successful
[1575] supportedLDAPVersion: value = 3
[1575] supportedLDAPVersion: value = 2
[1575] Binding as [email protected]
[1575] Performing Simple authentication for [email protected] to 10.0.0.x
[1575] LDAP Search:
        Base DN = [dc=localdomain,dc=com]
        Filter = [samAccountName=cmcbride]
        Scope   = [SUBTREE]
[1575] User DN = [CN=Chris McBride,OU=Administrators,OU=Company OU,DC=localdomain,DC=com]
[1575] Talking to Active Directory server 10.0.0.x
[1575] Reading password policy for cmcbride, dn:CN=Chris McBride,OU=Administrators,OU=Company OU,DC=localdomain,DC=com
[1575] Binding as cmcbride
[1575] Performing Simple authentication for cmcbride to 10.0.0.x
[1575] Processing LDAP response for user cmcbride
[1575] Message (cmcbride):
[1575] Authentication successful for cmcbride to 10.0.0.x
[1575] Retrieved User Attributes:
[1575] objectClass: value = top
[1575] objectClass: value = person
[1575] objectClass: value = organizationalPerson
[1575] objectClass: value = user
[1575] cn: value = Chris McBride
[1575] sn: value = McBride
[1575] l: value = Tulsa
[1575] description: value = cmcbride non-admin test account
[1575] givenName: value = Chris
[1575] distinguishedName: value = CN=Chris McBride,OU=Administrators,OU=Company OU,DC=localdomain,DC=co
[1575] displayName: value = Chris McBride
[1575] name: value = Chris McBride
[1575] objectGUID: value = ....5..L...[..K.
[1575] codePage: value = 0
[1575] countryCode: value = 0
[1575] primaryGroupID: value = 513
[1575] objectSid: value = ...............1...{C..2....
[1575] sAMAccountName: value = cmcbride
[1575] sAMAccountType: value = 805306368
[1575] userPrincipalName: value = [email protected]
[1575] objectCategory: value = CN=Person,CN=Schema,CN=Configuration,DC=localdomain,DC=com
[1575] Fiber exit Tx=616 bytes Rx=2007 bytes, status=1
[1575] Session End
Working user:
[1585] Session Start
[1585] New request Session, context 0xd7fbf210, reqType = Authentication
[1585] Fiber started
[1585] Creating LDAP context with uri=ldap://10.0.0.x:389
[1585] Connect to LDAP server: ldap://10.0.0.x:389, status = Successful
[1585] supportedLDAPVersion: value = 3
[1585] supportedLDAPVersion: value = 2
[1585] Binding as [email protected]
[1585] Performing Simple authentication for [email protected] to 10.0.0.x
[1585] LDAP Search:
        Base DN = [dc=localdomain,dc=com]
        Filter = [samAccountName=cmcbride_a]
        Scope   = [SUBTREE]
[1585] User DN = [CN=Admin Chris McBride,OU=Administrators,OU=Company OU,DC=localdomain,DC=com]
[1585] Talking to Active Directory server 10.0.0.x
[1585] Reading password policy for cmcbride_a, dn:CN=Admin Chris McBride,OU=Administrators,OU=Company OU,DC=localdomain,DC=com
[1585] Read bad password count 0
[1585] Binding as cmcbride_a
[1585] Performing Simple authentication for cmcbride_a to 10.0.0.x
[1585] Processing LDAP response for user cmcbride_a
[1585] Message (cmcbride_a):
[1585] Authentication successful for cmcbride_a to 10.0.0.x
[1585] Retrieved User Attributes:
[1585] objectClass: value = top
[1585] objectClass: value = person
[1585] objectClass: value = organizationalPerson
[1585] objectClass: value = user
[1585] cn: value = Admin Chris McBride
[1585] sn: value = McBride
[1585] description: value = PTC User, cjm 05312011
[1585] givenName: value = Chris
[1585] distinguishedName: value = CN=Admin Chris McBride,OU=Administrators,OU=Company OU,DC=localdomain
[1585] instanceType: value = 4
[1585] whenCreated: value = 20110525173004.0Z
[1585] whenChanged: value = 20110619154158.0Z
[1585] displayName: value = Admin Chris McBride
[1585] uSNCreated: value = 6188062
[1585] memberOf: value = CN=VPN_Users,OU=Security Groups,OU=Company OU,DC=localdomain,DC=com
[1585]          mapped to IETF-Radius-Class: value = btvpn
[1585]          mapped to LDAP-Class: value = btvpn
[1585] memberOf: value = CN=Websense Filtered Group,OU=Distribution Groups,OU=Company OU,DC=baer-t
[1585]          mapped to IETF-Radius-Class: value = CN=Websense Filtered Group,OU=Distribution Groups,OU=Company OU,DC=localdomain,DC=com
[1585]          mapped to LDAP-Class: value = CN=Websense Filtered Group,OU=Distribution Groups,OU=Company OU,DC=localdomain,DC=com
[1585] memberOf: value = CN=TS_Sec_Admin,OU=Terminal Server 2003,DC=localdomain,DC=com
[1585]          mapped to IETF-Radius-Class: value = CN=TS_Sec_Admin,OU=Terminal Server 2003,DC=localdomain,DC=com
[1585]          mapped to LDAP-Class: value = CN=TS_Sec_Admin,OU=Terminal Server 2003,DC=localdomain,DC=com
[1585] memberOf: value = CN=Domain Admins,CN=Users,DC=localdomain,DC=com
[1585]          mapped to IETF-Radius-Class: value = CN=Domain Admins,CN=Users,DC=localdomain,DC=com
[1585]          mapped to LDAP-Class: value = CN=Domain Admins,CN=Users,DC=localdomain,DC=com
[1585] memberOf: value = CN=Enterprise Admins,CN=Users,DC=localdomain,DC=com
[1585]          mapped to IETF-Radius-Class: value = CN=Enterprise Admins,CN=Users,DC=localdomain,DC=com
[1585]          mapped to LDAP-Class: value = CN=Enterprise Admins,CN=Users,DC=localdomain,DC=com
[1585] memberOf: value = CN=Schema Admins,CN=Users,DC=localdomain,DC=com
[1585]          mapped to IETF-Radius-Class: value = CN=Schema Admins,CN=Users,DC=localdomain,DC=com
[1585]          mapped to LDAP-Class: value = CN=Schema Admins,CN=Users,DC=localdomain,DC=com
[1585] uSNChanged: value = 6560745
[1585] name: value = Admin Chris McBride
[1585] objectGUID: value = ..Kj4..E..c.VCHT
[1585] userAccountControl: value = 512
[1585] badPwdCount: value = 0
[1585] codePage: value = 0
[1585] countryCode: value = 0
[1585] badPasswordTime: value = 129531669834218721
[1585] lastLogoff: value = 0
[1585] lastLogon: value = 129532463799841621
[1585] scriptPath: value = SLOGIC.BAT
[1585] pwdLastSet: value = 129508182041981337
[1585] primaryGroupID: value = 513
[1585] objectSid: value = ...............1...{C..2. ..
[1585] adminCount: value = 1
[1585] accountExpires: value = 9223372036854775807
[1585] logonCount: value = 90
[1585] sAMAccountName: value = cmcbride_a
[1585] sAMAccountType: value = 805306368
[1585] userPrincipalName: value = [email protected]
[1585] objectCategory: value = CN=Person,CN=Schema,CN=Configuration,DC=localdomain,DC=com
[1585] dSCorePropagationData: value = 20110525174152.0Z
[1585] dSCorePropagationData: value = 16010101000000.0Z
[1585] lastLogonTimestamp: value = 129529717185508866
[1585] msTSExpireDate: value = 20110803160858.0Z
[1585] msTSLicenseVersion: value = 393216
[1585] msTSManagingLS: value = 92573-029-5868087-27549
[1585] Fiber exit Tx=633 bytes Rx=3420 bytes, status=1
[1585] Session End

As far as your configuration is concerned it looks perfectly fine. As you mentioned that the difference between the working and non working debugs is that in the non working debugs we do not see memberof attribute being retrieved.
the main reason could be that the username "[email protected]" with which you are performing the LDAP bind does not have sufficient privileges to retreive all the attributes from all the users in the AD. This looks like permission issue at the AD user level.
One thing you can try on the AD is to "Delegate Control" to this user ([email protected]) to "Read all properties" for all users and not just a subset of users. Please get in touch with AD Admin before making such a change on the AD.
Here is an external link just to give an idea about delegation of control to "Read all properties"
http://www.advproxy.net/ldapads.html

VPN access to a Watchguard firewall using Radius credentials

Good morning, I have an Ipod Touch 4G that I would like to use to connect to our Watchguard firewall using the built in VPN client and pptp
I am the person onsite that manages the Watchguard firewall(s) (x553 with 10.2.12 firmware) , which are setup for pptp vpn access using Windows Radius servers. The users use their Active Directory credentials to make the VPN connections.
I have several macs at home, including an iMac and Mac mini and both of them can easily make VPN connections to the Watchguard firewall using pptp VPN access with Radius credentials. T
The setup I have been trying on the ipod Touch 4g is using the dns name for the firewall (published in Network Solutions DNS). I have also tried the outside address of each firewall. For the account, since we are using a Radius connection into Active Directory, I put my login in the format of domain\username . RSA SecurID is On, the Encryption level is set to Auto and Send all traffic is off.
In my testing so far, the Ipod Touch starts the connection, starts authenticating to Radius and fails. If I turned off RSA SecurID, no authentication is attempted, so it looks like this needs to stay turned on. It doesn't seem to matter is Send all traffic is off or on. Having it off is preferable as I don't want to send all Internet traffic through the firewall when connected via VPN.
So, I basically duped the setup of the VPN on the Ipod Touch based on my setup that's working on the Mac Mini and Imacs at home. But VPN on the iPod Touch 4g with the latest version of IOS is not working.
Does anyone have this kind of configuration working on the iPod Touch 4g or know if this is a shortcoming of this version of the Ipod or IoS?
Thanks,
Leo

I fixed my vpn connection on the iPod Touch. This is what works for Radius login to a Watchguard firewall:
Server (DNS name or ip address).
Account domainname\username
RSA SecurIT off
Encryption level Auto
Send All Traffic off.
Leo

Read 'userPassword' attribute via LDAP?

Hi all,
Sorry if this question has already been answered...
I do not have access to a Sun ONE Directory server so I have not been able to answer this question for myself.
Is it possible to read the 'userPassword' attribute from a Sun ONE Directory Server via LDAP?
I know that this is not possible for MS AD, and I am guessing this is a standard used by all LDAP Servers.
Thanks in advance for any help,
Bryan Galvin

If the privileges are set properly, you can read the password in the Sun directory. If the password is stored in clear text (not the default) then you will see the password. If it is encrypted then you will see an encrypted password string preceded by the encryption method used, for example:
userPassword: {SHA}0twDi9KZ2bTTBL1PpYwcFxhWsCu=
An "old" method of authentication involved hashing the user-supplied password with the same algorithm and comparing it to the entry in the directory. (apologies to those "oldies" still using that method!)

Authenticate via LDAP - 2 diffrent "LDAP DN Strings"

Hello!
My Application gives access to users via LDAP.
I want to give access to users located in 2 diffrent LDAP - Objects.
Can anyone help me to solve the problem?
Regards
Michael

My idea was to create a function that calls 2 times function authenticate (http://www.oracle.com/technology/products/database/application_express/howtos/how_to_ldap_authenticate.html)
like this:
create or replace function "AUTHENTICATE_AD"
(p_uname in VARCHAR2, p_password in VARCHAR2)
return BOOLEAN
is
begin
RETURN(authenticate(LDAP_DN_STRING1, P_PASSWORD,LDAP HOST,LDAP PORT))
OR
(authenticate(LDAP_DN_STRING1, P_PASSWORD,LDAP HOST,LDAP PORT))
end;
Help of Fiel "Authentication Function" says:
"[...]The Application Express engine expects this function to have the signature (p_username in varchar2, p_password in varchar2) return boolean. The value of the username and password fields passed to the login API, which is called by the login page, will be passed to your function. [...]
When I insert AUTHENTICATE_AD into "Authentication Function" and try to logon an error message diplayed :
ORA-06550: Zeile 2, Spalte 1: PLS-00306: Falsche Anzahl oder Typen von Argumenten in Aufruf von 'AUTHENTICATE_AD' ORA-06550: Zeile 2, Spalte 1: PL/SQL: Statement ignored
I don't know which arguments are given!

How to get user attributes from LDAP authenticator

I am using an LDAP authenticator and identity asserter to get user / group information.
I would like to access LDAP attributes for the user in my ADF Taskflow (Deployed into webcenter spaces).
Is there an available api to get all the user attributes through the established weblogic authenticator provider or do i have to directly connect to the LDAP server again?
Any help would be appreciated

Hi Julián,
in fact, I've never worked with BSP iViews and so I don't know if there is a direct way to achieve what you want. Maybe you should ask within BSP forum...
A possibility would be to create a proxy iView around the BSP iView (in fact: before the BSP AppIntegrator component) which reads the user names and passes this as application params to the BSP component. But this is
Beginner
Medium
Advanced
Also see http://help.sap.com/saphelp_nw04/helpdata/en/16/1e0541a407f06fe10000000a1550b0/frameset.htm
Hope it helps
Detlev

ASA , Cisco VPN client with RADIUS authentication

Hi,
I have configured ASA for Cisco VPN client with RADIUS authentication using Windows 2003 IAS.
All seems to be working I get connected and authenticated. However even I use user name and password from Active Directory when connecting with Cisco VPN client I still have to provide these credentials once again when accessing domain resources.
Should it work like this? Would it be possible to configure ASA/IAS/VPN client in such a way so I enter user name/password just once when connecting and getting access to domain resources straight away?
Thank you.
Kind regards,
Alex

Hi Alex,
It is working as it should.
You can enable the vpn client to start vpn before logon. That way you login to vpn and then logon to the domain. However, you are still entering credentials twice ( vpn and domain) but you have access to domain resources and profiles.
thanks
John

ASA 5505: VPN Access to Different Subnets

Hi All-
I'm trying to figure out how to configure our ASA so that remote users can have VPN access to two different subnets (office LAN and phone LAN). Currently, I have 3 VLANs setup -- VLAN 1 (inside), VLAN 2 (outside), VLAN 13 (phone LAN). Essentially, remote users should be able to access their PC (192.168.1.0 /24) and also access the office phone system (192.168.254.0 /24). Is this even possible? Below is the configurations on our ASA,
Thanks in advance:
ASA Version 8.2(5)
names
name 10.0.1.0 Net-10
name 20.0.1.0 Net-20
name 192.168.254.0 phones
name 192.168.254.250 PBX
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
switchport access vlan 3
interface Ethernet0/6
interface Ethernet0/7
switchport access vlan 13
interface Vlan1
nameif inside
security-level 100
ip address 192.168.1.98 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address X.X.139.79 255.255.255.224
interface Vlan3
no nameif
security-level 50
ip address 192.168.5.1 255.255.255.0
interface Vlan13
nameif phones
security-level 100
ip address 192.168.254.200 255.255.255.0
ftp mode passive
object-group service RDP tcp
port-object eq 3389
object-group service DM_INLINE_SERVICE_1
service-object ip
service-object tcp eq ssh
access-list vpn_nat_inside extended permit ip Net-10 255.255.255.224 192.168.1.0 255.255.255.0
access-list vpn_nat_inside extended permit ip Net-10 255.255.255.224 phones 255.255.255.0
access-list inside_nat0_outbound extended permit ip any Net-10 255.255.255.224
access-list inside_access_in extended permit ip any any
access-list Split_Tunnel_List standard permit Net-10 255.255.255.224
access-list phones_nat0_outbound extended permit ip any Net-10 255.255.255.224
access-list outside_access_in extended permit object-group DM_INLINE_SERVICE_1 host Mac any
pager lines 24
logging enable
logging timestamp
logging monitor errors
logging history errors
logging asdm informational
mtu inside 1500
mtu outside 1500
mtu phones 1500
ip local pool SSLClientPool-10 10.0.1.1-10.0.1.20 mask 255.255.255.128
no failover
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
global (inside) 10 interface
global (outside) 1 interface
global (phones) 20 interface
nat (inside) 0 access-list inside_nat0_outbound
nat (inside) 1 0.0.0.0 0.0.0.0
nat (outside) 10 access-list vpn_nat_inside outside
nat (phones) 0 access-list phones_nat0_outbound
nat (phones) 1 0.0.0.0 0.0.0.0
access-group inside_access_in in interface inside
access-group outside_access_in in interface outside
route outside 0.0.0.0 0.0.0.0 X.X.139.65 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
aaa authentication enable console LOCAL
aaa authentication ssh console LOCAL
aaa authorization command LOCAL
http server enable
http 192.168.1.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map outside_map interface outside
crypto ca trustpoint ASDM_TrustPoint0
enrollment self
subject-name CN=pas-asa.null
keypair pasvpnkey
crl configure
crypto isakmp enable outside
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 28800
vpn-sessiondb max-session-limit 10
telnet timeout 5
ssh 192.168.1.100 255.255.255.255 inside
ssh 192.168.1.0 255.255.255.0 inside
ssh Mac 255.255.255.255 outside
ssh timeout 60
console timeout 0
dhcpd auto_config inside
dhcpd address 192.168.1.222-192.168.1.223 inside
dhcpd dns 64.238.96.12 66.180.96.12 interface inside
threat-detection basic-threat
threat-detection statistics host
threat-detection statistics access-list
threat-detection statistics tcp-intercept rate-interval 30 burst-rate 400 average-rate 200
ssl trust-point ASDM_TrustPoint0 outside
webvpn
enable outside
anyconnect-essentials
svc image disk0:/anyconnect-win-2.5.2014-k9.pkg 1
svc image disk0:/anyconnect-macosx-i386-2.5.2014-k9.pkg 2
svc enable
tunnel-group-list enable
group-policy SSLClientPolicy internal
group-policy SSLClientPolicy attributes
wins-server none
dns-server value 64.238.96.12 66.180.96.12
vpn-access-hours none
vpn-simultaneous-logins 3
vpn-idle-timeout none
vpn-session-timeout none
ipv6-vpn-filter none
vpn-tunnel-protocol svc
group-lock value PAS-SSL-VPN
default-domain none
vlan none
nac-settings none
webvpn
svc mtu 1200
svc keepalive 60
svc dpd-interval client none
svc dpd-interval gateway none
svc compression none
group-policy DfltGrpPolicy attributes
dns-server value 64.238.96.12 66.180.96.12
vpn-tunnel-protocol IPSec svc webvpn
tunnel-group DefaultRAGroup general-attributes
address-pool SSLClientPool-10
tunnel-group DefaultRAGroup ipsec-attributes
pre-shared-key *****
tunnel-group PAS-SSL-VPN type remote-access
tunnel-group PAS-SSL-VPN general-attributes
address-pool SSLClientPool-10
default-group-policy SSLClientPolicy
tunnel-group PAS-SSL-VPN webvpn-attributes
group-alias PAS_VPN enable
group-url https://X.X.139.79/PAS_VPN enable
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
service-policy global_policy global
privilege cmd level 3 mode exec command perfmon
privilege cmd level 3 mode exec command ping
privilege cmd level 3 mode exec command who
privilege cmd level 3 mode exec command logging
privilege cmd level 3 mode exec command failover
privilege cmd level 3 mode exec command packet-tracer
privilege show level 5 mode exec command import
privilege show level 5 mode exec command running-config
privilege show level 3 mode exec command reload
privilege show level 3 mode exec command mode
privilege show level 3 mode exec command firewall
privilege show level 3 mode exec command asp
privilege show level 3 mode exec command cpu
privilege show level 3 mode exec command interface
privilege show level 3 mode exec command clock
privilege show level 3 mode exec command dns-hosts
privilege show level 3 mode exec command access-list
privilege show level 3 mode exec command logging
privilege show level 3 mode exec command vlan
privilege show level 3 mode exec command ip
privilege show level 3 mode exec command ipv6
privilege show level 3 mode exec command failover
privilege show level 3 mode exec command asdm
privilege show level 3 mode exec command arp
privilege show level 3 mode exec command route
privilege show level 3 mode exec command ospf
privilege show level 3 mode exec command aaa-server
privilege show level 3 mode exec command aaa
privilege show level 3 mode exec command eigrp
privilege show level 3 mode exec command crypto
privilege show level 3 mode exec command vpn-sessiondb
privilege show level 3 mode exec command ssh
privilege show level 3 mode exec command dhcpd
privilege show level 3 mode exec command vpnclient
privilege show level 3 mode exec command vpn
privilege show level 3 mode exec command blocks
privilege show level 3 mode exec command wccp
privilege show level 3 mode exec command dynamic-filter
privilege show level 3 mode exec command webvpn
privilege show level 3 mode exec command module
privilege show level 3 mode exec command uauth
privilege show level 3 mode exec command compression
privilege show level 3 mode configure command interface
privilege show level 3 mode configure command clock
privilege show level 3 mode configure command access-list
privilege show level 3 mode configure command logging
privilege show level 3 mode configure command ip
privilege show level 3 mode configure command failover
privilege show level 5 mode configure command asdm
privilege show level 3 mode configure command arp
privilege show level 3 mode configure command route
privilege show level 3 mode configure command aaa-server
privilege show level 3 mode configure command aaa
privilege show level 3 mode configure command crypto
privilege show level 3 mode configure command ssh
privilege show level 3 mode configure command dhcpd
privilege show level 5 mode configure command privilege
privilege clear level 3 mode exec command dns-hosts
privilege clear level 3 mode exec command logging
privilege clear level 3 mode exec command arp
privilege clear level 3 mode exec command aaa-server
privilege clear level 3 mode exec command crypto
privilege clear level 3 mode exec command dynamic-filter
privilege cmd level 3 mode configure command failover
privilege clear level 3 mode configure command logging
privilege clear level 3 mode configure command arp
privilege clear level 3 mode configure command crypto
privilege clear level 3 mode configure command aaa-server
prompt hostname context
no call-home reporting anonymous

Hi Jouni-
Yes, with the current configs remote users only have access to the 'inside' LAN (192.168.1.0). The digital PBX on the 'phone' LAN (192.168.254.0) is not reachable through their VPN session.
Per you recommendation, I removed the following configs from my ASA:
global (phones) 20 interface
... removing this configuration didn't make a difference -- I was still able to ping the inside LAN, but not the phone LAN.
global (inside) 10 interface
nat (outside) 10 access-list vpn_nat_inside outside
.... removing these two configurations caused the inside LAN to be unreachable. The phone LAN was not reachable, either. So, I put the '10' configurations back.
The ASDM syslog is showing the following when I try to ping the PBX (192.168.254.250) through the VPN session:
"portmap translation creation failed for icmp src outside:10.0.1.1 dest phones:PBX (type 8, code 0)"
What do you think?
Thanks!

How to use two different LDAP authentication for my Apex application login

Hi,
I have 2 user groups defined in the LDAP directory and I provided the DN string for apex authentication something like the below
cn=%LDAP_USER%,ou=usergrp1,dc=oracle,dc=com
cn=%LDAP_USER%,ou=usergrp2,dc=oracle,dc=com
The problem is I couln't pointout both the groups in DN string, I am trying to allow both usergroups to access the application.
Does anyone know how to define both the group in LDAP DN String ?.
Thanx in advance
Vijay.

Vijay,
I don't think you'll be able to use the built-in LDAP authentication scheme. Just create a new authentication scheme that has its own authentication function. In that function code your calls to dbms_ldap however you need. Search the forum for dbms_ldap.simple_bind_s to find examples.
Scott

Questions regarding Outlook Web App, Remote Desktop, Remote Web Access and VPN Access

Hi there,
I want to ask a series of questions regarding Outlook Web App, Remote Desktop, Remote Web Access and VPN access and was hoping whether you could help me. Below are my questions to ask you.
Outlook Web App - What do I need to configure in order to get my Exchange account to work with the OWA app on my iPhone? Is Office 360 required on the server that hosts Outlook Web App in our organisation? When I configure the settings and
connect I get the following message "couldn't connect - We couldn't connect to the server. Check your information and make sure it's correct." I can connect with other devices using Outlook Web App.
Remote Desktop - What do I need to configure in order to connect to my computer at work using Remote Desktop on my Windows Phone? When I configure the settings and connect I get the following message "Connection error - We couldn't connect
to the remote PC. Make sure the PC is turned on and connected to the network, and that remote access is enabled. Inquiring minds may find this error code helpful: 0x204" I can connect with other devices using Remote Desktop. There are currently no
RD Server settings in the Remote Desktop app on the Windows Phone and the only way I'm to connect to my PC at work is via Remote Desktop and not to be confused with the one by Microsoft, however the app is on a trial basis and times out every 5 minutes and
can only be used once every hour unless I purchased the app for £2.99 off the App Store but would ideally like to use the Microsoft Remote Desktop app though.
Remote Web Access - What do I need to configure in order to get Remote Web Access on my Windows Phone using a URL? When I log in using a URL I get the following message "There is a problem with this Web page. Please contact the person who manages
the server" I can connect with other devices using Remote Web Access. Also how do you enable the background option for Remote Web Access? I know how to do this in Remote Desktop but not in Remote Web Access. Remote Web Access works on PCs regardless
being onsite and offsite and on my iPhone, the same issue also occurs with my Nokia 5230s regardless of whether I'm using Opera Mobile or Mini or the latest Nokia Browser.
VPN access - How do you configure VPN access on a Windows Phone using VPN? I cannot find the protocols PPTP, L2TP, SSTP and IPsec in order to configure VPN access on the Windows Phone apart from IKEv2.
Many thanks,
RocknRollTim

Any help would be much appreciated.
Kind regards,
RocknRollTim

VPN Access via LDAP authentication

Similar Messages

Maybe you are looking for