VPN all of a sudden shows up and when I turn it off it just turns back on.

Would somebody please explain what this VPN is and should it be on?

Sync the device to iTunes on the computer it normally syncs with.
Basic troubleshooting from the Users Guide is reset, restart, restore ( first from backup then as new).  Try each of these in order until the issue is resolved.

Similar Messages

  • I just got my iPad and the iMessage was working and than all of a sudden it stopped and when I tired to log back in, it said I had a bad connection which I didn't. So it won't let me use my iMessage

    I just got my iPad and the iMessage was working and than all of a sudden it stopped and when I tired to log back in, it said I had a bad connection which I didn't. So it won't let me use my iMessage

    Check Settings>General>Date & Time>Set Automatically>On. Make sure that the time zone setting is also set correctly.
    If that didn't solve the problem, restart your iPad and try again. If that fails, reset your iPad and try again.
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • It all of a sudden stopped working and when I try to click on something my computer just beeps at me. I cant even exit imovie

    My imovie all of a sudden stopped working when I was in the middle of making a project and then all of a sudden when I tried to click on something my computer just beeped at me. I cant even exit out of the program! Or shut down my computer unless I quit imovie. Help?!?!

    What version of OS X and iMovie are you using?

  • Flashing lights in an HP C7280 all-in-one. Spontaneously occurring and when the printer is off.

    My HP C7280 spontaneously has lots of lights flashing on and off and an error code on the screen.  This has happened a few times when the machine was powered off---turned itself back on.
    There may be some connection to my having replaced ink cartridge (with HP original cartridges, too).
    Any suggestions on whether this is a software or hardware problem and what to do about it?

    Searching the web, I found the solution of a hard re-set---namely unplugging and replugging it with the # and 6 buttons pressed down; release after the printer comes on and then the screen goes black.  I had to do it several times until that works.
    Trying to understand what the problem really is since having charged this on an Amex card 18 mos. ago, there is an "extended warranty" available so I might be able to get a replacement that way!
    Wondering if that re-set fix is supposed to keep it working or not.

  • My macbook suddenly shut down, and when rebooted, imovie project was completely gone.  No record of it at all.  Have been working on it for days, and it has always been there.  Any way to restore it?  Thanks.

    My macbook suddenly shut down, and when rebooted, imovie project was completely gone.  No record of it at all.  Have been working on it for days, and it has always been there.  Other projects are still there.  Any way to restore it?  Thanks.

    I figured it out!!!
    Hey guys! Here's what I did that saved my project.
    -SHORT VERSION-
    Use the Finder window on your Mac to copy and paste your old project (the one not showing up in imovie) to a new folder so that iMovie will see it.
    -LONG VERSION-
    CONDITIONS:
    The project has to exist on your hard drive. To see if it's hiding around somewhere go to:
    Home (your name)>Movies>iMovie Library (right click and select Show Package Contents)
    In the iMovie Library folder (the default is usually the date) open it to see if your Project is inside. If it is, you are in luck!
    RESTORING PROJECT:
    Open iMovie
    start a new folder under the iMovie Library (again, the default is usually todays date)
    Close iMovie
    In the finder window (as explained above in the CONDITIONS section) select the files and folders of your project and copy them (in my case these consist of folders called Analysis Files, Original Media, "MYPROJECT", Render Files, Shared Items)
    There should now be a folder with today's date in that Show Package Contents folder.
    Paste a copy of your project;s files into this folder.
    When it is done copying, open up the "Original Media" folder and all of your images and clips should be present.
    reopen iMovie. Your project should show up in the Libraries list.
    *If your full project isn't showing in the iMovie timeline (mine just had empty bubbles where all my clips and audio should be) try dragging and dropping the clips and images from the project's "Original Media" folder into the import section of your project. Once the files were reimported, iMovie recognized them all and put them back in the correct place for me.
    Hope this helps someone!

  • Why is DRM protected all of a sudden showing up on my phone for my music?

    Why is DRM all of a sudden showing up on my music that i already paid for?

    iTunes music is not DRM protected, and hasn't been for at least 4 years.

  • I am using an early 2008 MacBook Pro and am having issues with it deleting text on its own (in word, emails, etc.). As I am typing it all of a sudden starts deleting and I can't stop it. What can I do?

    I am using an early 2008 MacBook Pro and am having issues with it deleting text on its own (in word, emails, etc.). As I am typing it all of a sudden starts deleting and I can't stop it. This happened once before and it was due to a buldging battery pressing on the track pad. I checked the battery and it appears to be fine. What can I do?

    Please read this whole message before doing anything.
    This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
    Step 1
    The purpose of this step is to determine whether the problem is localized to your user account.
    Enable guest logins* and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up guest users” (without the quotes) in the search box. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
    While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    *Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
    Step 2
    The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
    Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
    When you see the gray Apple logo, release the shift key.
    If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.  The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    *Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode.
    Test while in safe mode. Same problem?
    After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

  • I use lightroom with the soft proofing feature for my printing. I used to make a copy proof, but all of the sudden something changed, and even if I'm on the copy in the developing mode it prints the original. Also, If i chose a file that was already in li

    I use lightroom with the soft proofing feature for my printing. I used to make a copy proof, but all of the sudden something changed, and even if I'm on the copy in the developing mode it prints the original. Also, If i chose a file that was already in light room to print, even though I have the chosen file up in the developing mode, it will instead print the most recent file that I added to lightroom. If found a way to work around these problems, (check make this the copy in the soft proofing, and copy my settings and delete and reload the old files) but it's a slight hassle and it didn't use to do this. Not sure why it changed. Could I have accidentally changed a setting?

    See
    iOS: Device not recognized in iTunes for Windows
    - I would start with
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or              
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
    - Then do the other actions of:
    iOS: Device not recognized in iTunes for Windows
    paying special attention to item #5
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Also see:
    iPod not recognised by windows iTunes
    Troubleshooting issues with iTunes for Windows updates
    - Try on another computer to help determine if computer or iPod problem

  • HT4515 why are my text messages all of a sudden in green and do not say delivered?

    why are my text messages all of a sudden in green and do not say delivered?  Also for the first time since I obtained the phone I went to use the headphones and the insert to headphones is very loose and I can connect for about 10 seconds then nothing, I do believe it is the jack that inserts into the phone or the phone receptacle is bad or the headphone piece that goes into the phone is bad it is not working is the main issues.  Thank you

    I should also mention we have 2 other iPhone users and 1 Samsung s5 user in my home not having the same problem.

  • I have a file on my desk top and in my iPhoto called .DS_Store and I can't trash it it just pops back up all the time. What do I do?

    I have a file on my desk top and in my iPhoto called .DS_Store and I can't trash it it just pops back up all the time. What do I do?

    Download and run the free application TinkerTool (not "TinkerTool System"), select the Finder tab, and uncheck the box labeled Show hidden and system files. Then click Relaunch Finder.

  • I had an imap account in my iPad and my iPhone 4. They worked just fine till about Christmas. They act like they are checking the mail and it shows there is mail to come in, but it just goes back to saying checking mail.  Can't send mail either.

    I had an imap account in my iPad and my iPhone 4. They worked just fine till about Christmas. They act like they are checking the mail and it shows there is mail to come in, but it just goes back to saying checking mail.  Can't send mail either.

    Update to above question:
    Hello All,
    To anyone with the same problem described above, on THEIR iPad (if it is running iOS 7.0.2):
    Go to Settings; Mail, Contacts, Calendars; DELETE your *******@btinternet.com e-mail account, that you originally set up either using 'Other', or the 'BT' option which I am sure was in the list previous to the iOS 7 update.
    Then ADD a NEW account choosing YAHOO from the list of options. DO NOT USE 'OTHER'.
    Enter the correct details just as you (almost certainly) had already done in your previous attempts using 'other'.
    When you see the 'verifying......' and 'the blue ticks' you should be able to exit settings and open your mail app and then receive all your 'old' e-mails again, AND be able to SEND as well.
    All my 'old' e-mails, were NOT found in the 'old e-mail' folder though. THEY are still in my inbox.
    So this fix worked for me.
    After I deleted my account from 'OTHER' and put it in Yahoo, I like other people also ended up with more folders.
    I hope this works for you on YOUR Apple devices.
    Bob

  • I accidenttly deleted my notes and the icloud cleared all the message from both ipad and iphone  ...How can i get it back?? If I can ??

    I accidenttly deleted my notes and the icloud cleared all the message from both ipad and iphone  ...How can i get it back?? If I can ??

    Your notes should be stored in your backup, so if you have backed up the iPad and that backup does contain those notes that you deleted, you can try restoring from your backup. If you haven't backed up the iPad since you created those notes, they are gone.
    If you backup with iCloud only, restoring from backup involves erasing the device and then going through the setup all over again and finally restoring from the iCloud backup. This article explains the process quite clearly.
    http://gigaom.com/apple/ios-101-set-up-and-restore-from-icloud-backup/
    If you backup with iTunes, connect the iPad to your computer, launch iTunes and right click on the device name on the left and select - Restore from Backup. But before you do that .... turn off auto sync in iTunes - without connecting the iPad - launch iTunes and go to Edit>Preferences>Devices and check the box at the bottom of that window in order to turn off auto sync.
    Email messages are not stored in your backups.

  • I am trying to sync my itunes with my ipod, but when I get to step 3 of syncing, it stops. Also, I deleted all the songs on my ipod, and when I go to my music in my ipod the songs are all still there and in a grey color and I'm not able to select them.

    I am trying to sync my itunes with my ipod, but when I get to step 3 of syncing, it stops. Also, I deleted all the songs on my ipod, and when I go to my music in my ipod the songs are all still there and in a grey color and I'm not able to select them. How do I completely clear my ipod music, and how can I solve the syncing problem?

    Sync works the same way it always has, connect the device, select the content desired to sync and sync.
    All the media should be in iTunes already, iDevices are not and have never been backup devices.
    If this is a new computer, move the content from the old computer to the new computer.

  • TS3697 all of my songs are gone and when i try to sync again the sync is 2 seconds long and nothing happens

    all of my songs are gone and when i try to sync again the sync is 2 seconds long and nothing happens plus all of my photos from my computer synced to my phone and i cant delete them and i dont have neough storage PLEASE HELP ABOUT TO CRY

    1. Have you applied sync settings for music to be synced to the iPhpne?
    2. Photos that are synced to the iPhone cannot be deleted directly from the iPhone
    To delete photos and videos from your device
    To delete synced photos and videos
    In iTunes, select the device icon in the Devices list on the left. Click the Photos tab in the resulting window.
    Choose "Sync photos from."
    On a Mac, choose iPhoto or Aperture from the pop-up menu.
    On a Windows PC, choose Photoshop Album or Photoshop Elements from the pop-up menu.
    Choose "Selected albums" and deselect the albums or collections you want to delete.
    Click Apply.

  • My mini ipod appears off and not respond to any commands when pressed the buttons to reset, apple logo appeared and then the apple support site and it shuts down. already tried all the steps, but none worked, and when I plug it into my computer it does no

    My mini ipod appears off and not respond to any commands when pressed the buttons to reset, apple logo appeared and then the apple support site and it shuts down. already tried all the steps, but none worked, and when I plug it into my computer it does not appear in the iTunes bar. what do I do?

    If MacKeeper corrupted the Recovery partition then even I underestimated its potential for damage. Garbage "cleaning" apps will cause misery but I have not found that the Recovery partition to have been affected by using MacKeeper or anything like it. I doubt that it did so, but I have learned not to underestimate the potential for such things to result in system corruption.
    Before concluding your Mac has a hardware failure, try booting OS X Internet Recovery by holding command option r on startup (three fingers). That will force your iMac to bypass the Recovery partition altogether, and convey the ability to create a new one.
    An Internet connection will be required (wired or wireless).
    At the Mac OS X Utilities screen, select Disk Utility. Select your startup volume (usually named "Macintosh HD") and click the Repair Disk button. Describe any errors it reports in red. If Disk Utility reports "The volume Macintosh HD appears to be OK" in green then you can be reasonably (though not completely) assured your hard disk is in good working order.
    Assuming the HD remains usable you can then use Disk Utility to erase it. Reinstall OS X, restore your essential software and other files, and don't reinstall the junk.

Maybe you are looking for

  • No sound through mini DVI-HDMI adapter.

    I've never had a problem hooking my Macbook Air up to my TV through the HDMI cable before.  I believe the change happened after updating to 10.8.2, but I can't be sure.  When I plug in the adapter, the picture goes through to the TV (just as before),

  • Can two different members of Creative Cloud, to share the same project?

    I work with a partner who also has a Creative Cloud account. If we need work in the same project, how can she access to my web accounts from her computer  and viceversa?

  • IOS 5 photo gallery bug

    A few issues here. For 1, I cannot delete any pictures, I am not talking about photostream, I have that feature off, a new photo taken can not be delete. It acts as if it is deleted then a second or 2 later it reappears. Also, when opening a photo th

  • Changing variable values in query navigation

    Hello, We used to use the functionality of a user exit variable for a web template query and could enter a default value for a query, like yesterday's date. This allowed the web template to be presented without a user having to enter variables in ord

  • Change of number over time

    is there any standard FM to calculate change of number over time . where Z is my number.i have to find change of Z over a time period. i.e I have to find dZ. Any idea. Thanks in advance. Message was edited by:         Maya Vinothini