VPN between XP client IPSec and IOS for remote access

Solved.
http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Virtual%20Private%20Networks&topic=General&CommCmd=MB%3Fcmd%3Ddisplay_location%26location%3D.1dd7d54c/0
Hi,
I am trying to implement remote access for XP clients using their IPSec built-in feature and my 805 router configured with dynamic crypto map, but it's not working. Apparently the remote client IKE phase1 is successful but it stucks there.
Does any one face it before.
The client is behind a adsl router but I am allowing the traffic 500 through it and I am not seeing traffic leaving the cisco router. So it's in the 805.
Thanks in advance
David

If you setup a VPN server on your Mac (server) at home, and configure it to root all traffic via the VPN connection by defining the network 0.0.0.0 as being 'private' this will cause all traffic to go via your home Mac and therefore bypass the hospital filter.
You can test this by going to the following address when not connected to the VPN and after connecting to the VPN, the public IP address should change to show when connected to the VPN the public IP address becomes your home address.
See http://www.whatismyip.com (or similar site)
This approach can also get round 'geo-ip' protection. For example if your abroad on holiday and still want to get access to BBC iPlayer or Hulu.

Similar Messages

Download Oracle client, instant client, sqlplus and isql for Unix sco6

Can you please let me know where can I download 10g R2 Oracle client, instant client, sqlplus and isql for Unix sco6. Also if you can let me know if this all above is compatible with unix sco6.

Hi,
Check the link below.
/R
http://www.oracle.com/technology/software/index.html

MDT 2013: bootstrap.ini not applying username and password for share access

I customized my bootstrap.ini file to skip the welcome screen, set keyboard locale, and enter a service account username and password for share access. The welcome screen skip and keyboard locale work beautifully but it's not applying the share username/password/domain
at all.
bootstrap.ini:
[Settings]
Priority=Default
[Default]
DeployRoot=\\mydeploymentserver\DeploymentShare$
UserID=myuserid
UserDomain=mydomain.com
UserPassword=mypassword
KeyboardLocale=en-US
SkipBDDWelcome=YES
I verified that the unattend.xml file on the MININT volume during deployment had all of this information populated correctly:
<?xml version="1.0" encoding="utf-8"?>
<unattend xmlns="urn:schemas-microsoft-com:unattend">
<settings pass="windowsPE">
<component name="Microsoft-Windows-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State">
<ImageInstall>
<OSImage>
<WillShowUI>OnError</WillShowUI>
<InstallTo>
<DiskID>0</DiskID>
<PartitionID>2</PartitionID>
</InstallTo>
<InstallFrom>
<Path>\\mydeploymentserver\deploymentshare$\Operating Systems\Windows 7 x64 with District Software - 06222014\Windows 7 x64 with District Software - 06222014.wim</Path>
<MetaData>
<Key>/IMAGE/INDEX</Key>
<Value>1</Value>
</MetaData>
</InstallFrom>
</OSImage>
</ImageInstall>
<Display>
<ColorDepth>16</ColorDepth>
<HorizontalResolution>1024</HorizontalResolution>
<RefreshRate>60</RefreshRate>
<VerticalResolution>768</VerticalResolution>
</Display>
<ComplianceCheck>
<DisplayReport>OnError</DisplayReport>
</ComplianceCheck>
<UserData>
<AcceptEula>true</AcceptEula>
</UserData>
</component>
<component name="Microsoft-Windows-International-Core-WinPE" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<SetupUILanguage>
<UILanguage>en-US</UILanguage>
</SetupUILanguage>
<InputLocale>0409:00000409</InputLocale>
<SystemLocale>en-US</SystemLocale>
<UILanguage>en-US</UILanguage>
<UserLocale>en-US</UserLocale>
</component>
</settings>
<settings pass="generalize">
<component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<DoNotCleanTaskBar>true</DoNotCleanTaskBar>
</component>
</settings>
<settings pass="specialize">
<component name="Microsoft-Windows-UnattendedJoin" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State">
<Identification>
<Credentials>
<Username>myusername</Username>
<Domain>mydomain.com</Domain>
<Password>mypassword</Password>
</Credentials>
<JoinDomain>mydomain.com</JoinDomain>
</Identification>
</component>
<component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State">
<ComputerName>eos-vm-02</ComputerName>
<RegisteredOrganization>Regional School District 19</RegisteredOrganization>
<RegisteredOwner>Information Technology</RegisteredOwner>
<DoNotCleanTaskBar>true</DoNotCleanTaskBar>
<TimeZone>Eastern Standard Time</TimeZone>
</component>
<component name="Microsoft-Windows-IE-InternetExplorer" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<Home_Page>http://www.eosmith.org</Home_Page>
<DisableWelcomePage>true</DisableWelcomePage>
<DisableFirstRunWizard>false</DisableFirstRunWizard>
</component>
<component name="Microsoft-Windows-Deployment" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<RunSynchronous>
<RunSynchronousCommand wcm:action="add">
<Description>EnableAdmin</Description>
<Order>1</Order>
<Path>cmd /c net user Administrator /active:yes</Path>
</RunSynchronousCommand>
<RunSynchronousCommand wcm:action="add">
<Description>UnfilterAdministratorToken</Description>
<Order>2</Order>
<Path>cmd /c reg add HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System /v FilterAdministratorToken /t REG_DWORD /d 0 /f</Path>
</RunSynchronousCommand>
<RunSynchronousCommand wcm:action="add">
<Description>disable user account page</Description>
<Order>3</Order>
<Path>reg add HKLM\Software\Microsoft\Windows\CurrentVersion\Setup\OOBE /v UnattendCreatedUser /t REG_DWORD /d 1 /f</Path>
</RunSynchronousCommand>
</RunSynchronous>
</component>
<component name="Microsoft-Windows-International-Core" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<InputLocale>en-US</InputLocale>
<SystemLocale>en-US</SystemLocale>
<UILanguage>en-US</UILanguage>
<UserLocale>en-US</UserLocale>
</component>
<component name="Microsoft-Windows-TapiSetup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<TapiConfigured>0</TapiConfigured>
<TapiUnattendLocation>
<AreaCode>""</AreaCode>
<CountryOrRegion>1</CountryOrRegion>
<LongDistanceAccess>9</LongDistanceAccess>
<OutsideAccess>9</OutsideAccess>
<PulseOrToneDialing>1</PulseOrToneDialing>
<DisableCallWaiting>""</DisableCallWaiting>
<InternationalCarrierCode>""</InternationalCarrierCode>
<LongDistanceCarrierCode>""</LongDistanceCarrierCode>
<Name>Default</Name>
</TapiUnattendLocation>
</component>
<component name="Microsoft-Windows-SystemRestore-Main" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<DisableSR>1</DisableSR>
</component>
</settings>
<settings pass="oobeSystem">
<component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State">
<UserAccounts>
<AdministratorPassword>
<Value>administratorpassword</Value>
<PlainText>true</PlainText>
</AdministratorPassword>
</UserAccounts>
<AutoLogon>
<Enabled>true</Enabled>
<Username>Administrator</Username>
<Domain>.</Domain>
<Password>
<Value>administratorpassword</Value>
<PlainText>true</PlainText>
</Password>
<LogonCount>999</LogonCount>
</AutoLogon>
<Display>
<ColorDepth>32</ColorDepth>
<HorizontalResolution>1024</HorizontalResolution>
<RefreshRate>60</RefreshRate>
<VerticalResolution>768</VerticalResolution>
</Display>
<FirstLogonCommands>
<SynchronousCommand wcm:action="add">
<CommandLine>wscript.exe %SystemDrive%\LTIBootstrap.vbs</CommandLine>
<Description>Lite Touch new OS</Description>
<Order>1</Order>
</SynchronousCommand>
</FirstLogonCommands>
<OOBE>
<HideEULAPage>true</HideEULAPage>
<NetworkLocation>Work</NetworkLocation>
<ProtectYourPC>1</ProtectYourPC>
</OOBE>
<RegisteredOrganization>Regional School District 19</RegisteredOrganization>
<RegisteredOwner>Information Technology</RegisteredOwner>
<TimeZone>Eastern Standard Time</TimeZone>
</component>
<component name="Microsoft-Windows-International-Core" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<InputLocale>en-US</InputLocale>
<SystemLocale>en-US</SystemLocale>
<UILanguage>en-US</UILanguage>
<UserLocale>en-US</UserLocale>
</component>
</settings>
<settings pass="offlineServicing">
<component name="Microsoft-Windows-PnpCustomizationsNonWinPE" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<DriverPaths>
<PathAndCredentials wcm:keyValue="1" wcm:action="add">
<Path>\Drivers</Path>
</PathAndCredentials>
</DriverPaths>
</component>
</settings>
</unattend>
... and the bdd.log file appeared not to read the username and password at all:
<![LOG[ZTIUtility!GetAllFixedDrives (False)]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[New ZTIDiskPartition : \\MININT-U1TGFAD\root\cimv2:Win32_DiskPartition.DeviceID="Disk #0, Partition #0" \\MININT-U1TGFAD\root\cimv2:Win32_LogicalDisk.DeviceID="C:"]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[New ZTIDisk : \\MININT-U1TGFAD\root\cimv2:Win32_DiskDrive.DeviceID="\\\\.\\PHYSICALDRIVE0"]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[New ZTIDiskPartition : \\MININT-U1TGFAD\root\cimv2:Win32_DiskPartition.DeviceID="Disk #0, Partition #1" \\MININT-U1TGFAD\root\cimv2:Win32_LogicalDisk.DeviceID="D:"]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[New ZTIDisk : \\MININT-U1TGFAD\root\cimv2:Win32_DiskDrive.DeviceID="\\\\.\\PHYSICALDRIVE0"]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[ZTIUtility!GetAllFixedDrives = C: D:]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[Property LogPath is now = D:\MININT\SMSOSD\OSDLOGS]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[Microsoft Deployment Toolkit version: 6.2.5019.0]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[Property Debug is now = FALSE]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[Cleaned up a dirty deployment.]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[ZTIUtility!GetAllFixedDrives (False)]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[New ZTIDiskPartition : \\MININT-U1TGFAD\root\cimv2:Win32_DiskPartition.DeviceID="Disk #0, Partition #0" \\MININT-U1TGFAD\root\cimv2:Win32_LogicalDisk.DeviceID="C:"]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[New ZTIDisk : \\MININT-U1TGFAD\root\cimv2:Win32_DiskDrive.DeviceID="\\\\.\\PHYSICALDRIVE0"]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[New ZTIDiskPartition : \\MININT-U1TGFAD\root\cimv2:Win32_DiskPartition.DeviceID="Disk #0, Partition #1" \\MININT-U1TGFAD\root\cimv2:Win32_LogicalDisk.DeviceID="D:"]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[New ZTIDisk : \\MININT-U1TGFAD\root\cimv2:Win32_DiskDrive.DeviceID="\\\\.\\PHYSICALDRIVE0"]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[ZTIUtility!GetAllFixedDrives = C: D:]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[No task sequence is in progress.]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[New ZTIDisk : \\MININT-U1TGFAD\root\cimv2:Win32_DiskDrive.DeviceID="\\\\.\\PHYSICALDRIVE0"]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[Found Possible OS TargetDisk: \\MININT-U1TGFAD\root\cimv2:Win32_DiskDrive.DeviceID="\\\\.\\PHYSICALDRIVE0"]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[GetPartitions: 2]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[Found Possible OS Target Partition: \\MININT-U1TGFAD\root\cimv2:Win32_DiskPartition.DeviceID="Disk #0, Partition #0"]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[New ZTIDiskPartition : \\MININT-U1TGFAD\root\cimv2:Win32_DiskPartition.DeviceID="Disk #0, Partition #0" \\MININT-U1TGFAD\root\cimv2:Win32_LogicalDisk.DeviceID="C:"]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[Target Partition not big enough: \\MININT-U1TGFAD\root\cimv2:Win32_DiskPartition.DeviceID="Disk #0, Partition #0"]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[Found Possible OS Target Partition: \\MININT-U1TGFAD\root\cimv2:Win32_DiskPartition.DeviceID="Disk #0, Partition #1"]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[New ZTIDiskPartition : \\MININT-U1TGFAD\root\cimv2:Win32_DiskPartition.DeviceID="Disk #0, Partition #1" \\MININT-U1TGFAD\root\cimv2:Win32_LogicalDisk.DeviceID="D:"]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[Found Drive: D:]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[Found FirstPossibleSystemDrive: D:]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[Property SMSTSLocalDataDrive is now = D:]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[Unable to connect to BCDStore.]LOG]!><time="05:03:43.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[Not running within WinPE or WinRE.]LOG]!><time="05:03:43.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[Property DeploymentMethod is now = UNC]LOG]!><time="05:03:44.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[DeploymentMethod = UNC]LOG]!><time="05:03:44.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[Property DeployRoot is now = X:\Deploy]LOG]!><time="05:03:44.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[Using a local or mapped drive, no connection is required.]LOG]!><time="05:03:44.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[DeployRoot = X:\Deploy]LOG]!><time="05:03:44.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[Property DeployDrive is now = X:]LOG]!><time="05:03:44.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[DeployDrive = X:]LOG]!><time="05:03:44.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[Property PHASE is now = PREINSTALL]LOG]!><time="05:03:44.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[Property DeploymentType is now = NEWCOMPUTER]LOG]!><time="05:03:44.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[Phase = PREINSTALL]LOG]!><time="05:03:44.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[About to run command: wscript.exe "X:\Deploy\Scripts\ZTIGather.wsf" /inifile:Bootstrap.ini]LOG]!><time="05:03:44.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[Property inifile is now = Bootstrap.ini]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Microsoft Deployment Toolkit version: 6.2.5019.0]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[------------------------- Object Initialization -------------------------]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[------------------------- Initialization -------------------------]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Synchronizing the environments.]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Property DeployRoot is now = X:\Deploy]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Property DeployDrive is now = X:]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Finished synchronizing the environments.]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Getting OS info]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Property OSCurrentVersion is now = 6.3.9600]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Property OSCurrentBuild is now = 9600]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Property OSVersion is now = WinPE]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Property IsServerOS is now = False]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Property IsServerCoreOS is now = False]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Finished getting OS info]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Getting HAL information]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Property definition is now = BDD_Welcome_ENU.xml]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Microsoft Deployment Toolkit version: 6.2.5019.0]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Property HALName is now = acpiapic]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Finished getting HAL information]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Getting network info]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Checking network adapter: [00000001] Intel(R) PRO/1000 MT Network Connection]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[MAC address = 00:50:56:85:38:B4]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[IP Address = 172.16.4.182]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[IP Address = fe80::c98:9fef:4305:51f0]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Default Gateway = 172.16.4.1]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Property IPAddress001 is now = 172.16.4.182]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Property IPAddress002 is now = fe80::c98:9fef:4305:51f0]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Property MacAddress001 is now = 00:50:56:85:38:B4]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Property DefaultGateway001 is now = 172.16.4.1]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Finished getting network info]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Getting DP info]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Unable to determine ConfigMgr distribution point]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Finished getting DP info]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Getting WDS server info]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Not Wizard = False]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Property WizardComplete is now = N]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Property WDSServer is now = mydeploymentserver.mydomain.com]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Finished getting WDS server info]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Property HostName is now = MININT-U1TGFAD]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Getting asset info]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[FindFile: The file x86\Microsoft.BDD.Utility.dll could not be found in any standard locations.]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[FindFile(...\Microsoft.BDD.Utility.dll) Result : 1]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[RUN: regsvr32.exe /s ""]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[FindFile(...\Microsoft.BDD.Utility.dll) Result : 0]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[RUN: regsvr32.exe /s "X:\Deploy\Tools\x64\Microsoft.BDD.Utility.dll"]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Property AssetTag is now = No Asset Tag]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Property SerialNumber is now = VMware-42 05 2b f7 cd 5b 63 fd-83 8a 77 84 7c ed 79 05]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Property Make is now = VMware, Inc.]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Property Model is now = VMware Virtual Platform]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Property Product is now = 440BX Desktop Reference Platform]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Property UUID is now = F72B0542-5BCD-FD63-838A-77847CED7905]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Property Memory is now = 2047]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Property Architecture is now = X64]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Property ProcessorSpeed is now = 2800]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Property CapableArchitecture is now = AMD64 X64 X86]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Property IsLaptop is now = False]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Property IsDesktop is now = False]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Property IsServer is now = False]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Property IsUEFI is now = False]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Property IsOnBattery is now = False]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Property SupportsX86 is now = True]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Property SupportsX64 is now = True]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Property SupportsSLAT is now = False]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Finished getting asset info]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Getting OS SKU info]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Unable to determine Windows SKU while in Windows PE.]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Determining the Disk and Partition Number from the Logical Drive X:\WINDOWS]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Property OriginalArchitecture is now = ]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Property OriginalArchitecture is now = ]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Property OriginalArchitecture is now = ]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Getting virtualization info]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Property IsHypervisorRunning is now = True]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Property SupportsVT is now = False]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Property SupportsNX is now = True]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Property Supports64Bit is now = True]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Property SupportsHyperVRole is now = False]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Property IsVM is now = True]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Property VMPlatform is now = VMware]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Finished getting virtualization info]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Connection succeeded to MicrosoftVolumeEncryption]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[There are no encrypted drives]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Property IsBDE is now = False]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Processing the PREINSTALL phase.]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Determining the INI file to use.]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Finished determining the INI file to use.]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Using from [Settings]: Rule Priority = DEFAULT]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[------ Processing the [DEFAULT] section ------]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Property DEPLOYROOT is now = \\mydeploymentserver\DeploymentShare$]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Using from [DEFAULT]: DEPLOYROOT = \\mydeploymentserver\DeploymentShare$]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[------ Done processing X:\Deploy\Scripts\Bootstrap.ini ------]LOG]!>

Basics - Server 2008 R2 - SP1, WDS, MDT 2013
Well all, I've done this at least 20 times today and the deployment share info is still wrong...
Someone else built and messed with this thing so i'm trying to fix it. We have 2 MDT servers and 1 WDS that is on the Production MDT. I've turned the test MDT off.
It was working fine, until I updated the deployment share ... after adding some drivers for the surface pro 3 for the pxe boot
Very Simple bootstrap.ini
[Settings]
Priority=Default
[Default]
DeployRoot=\\MMPDEPLOY02\DeploymentShare$
UserID=xxx
UserDomain=xxx
UserPassword=xxx
KeyboardLocale=en-US
SkipBDDWelcome=YES
It continues to show up on the client as ||mdt901w8|deploymentshare$ (test server) (pipes for \ since it makes it a link and i'm new)
I've deleted all the .wim and associated files from all locations from the deployment share\boot folder and from the wds remote install\boot\x64\images folder where they are instead of the remote install\boot\images folder that everyone refers to.
I really can't figure this one out... I know it's something simple I'm over looking but I can't see it..
Any ideas..

With my iPhone 3GS and iOS 6 no problem a home with my WLAN. But now with my new iPhone 5 and iOS 6 no access to my WLAN at home. What can I do?

With my old iPhone 3GS and iOS 6 no problem a home with my WLAN. But now with my brand new iPhone 5 and iOS 6 no access to my WLAN at home. What can I do?

check to see if there is a firmware update for your router. There are also lots of troubleshooting steps you can take in this article
http://support.apple.com/kb/TS1398

VRF-Aware IPSec for Remote Access

Dear All,
Has anyone successfully implemented VRF-Aware IPSec for Remote Access ?
I am trying to implement this feature on a PE which has MPLS enabled
on the Internet facing interface.
With the config below, I am being able to establish an IPSEc tunnel but not being able to PING the VRF interface configured on the same PE.
I will be really grateful for any comment or any pointers for what could
be possibly wrong with the configuration below:
aaa new-model
aaa authentication login USER-AUTHENTICATION local
aaa authorization network GROUP-AUTHORISATION local
crypto keyring test-1
crypto isakmp policy 1
encr 3des
authentication pre-share
group 2
crypto isakmp client configuration group test-1
key test-1
domain test.com
pool cpe-1
acl 101
crypto isakmp profile test-1
vrf test-1
keyring test-1
match identity group test-1
client authentication list USER-AUTHENTICATION
isakmp authorization list GROUP-AUTHORISATION
client configuration address initiate
client configuration address respond
client configuration group test-1
crypto map IPSEC-AWARE-VRF 2 ipsec-isakmp dynamic test-1
ip local pool cpe-1 192.168.81.1 192.168.81.254 group test-1
crypto dynamic-map test-1 1
set transform-set test-1
set isakmp-profile test-1
reverse-route remote-peer
Internet facing interface
interface GigabitEthernet4/0/0
ip address x.x.x.x 255.255.255.240
ip router isis
mpls ip
crypto map IPSEC-AWARE-VRF
Customer facing interface
interface GigabitEthernet1/0/0.1
encapsulation dot1Q 100
ip vrf forwarding test-1
ip address 110.110.110.1 255.255.255.0
Kind regards,
ZH

Million thanks for this.
This now works after disabling CEF on the public facing interface.
Regards,
Zahid

I have a mac mini server which I want to set up for remote access from windows and mac pcs. How do I do this. I can access it form my home network OK

I have a mac mini server which I want to set up for remote access from windows and mac pcs. How do I do this. I can access it form my home network OK

Posted in error.

Username and password for Sun Access Manager 7.1

Hi
Thank you for reading my post
I ge the new Java Application Platform SDK Update 2 which has access manager and portlet management inside it.
Can you tell me what is username and password for Sun access Manager 7.1 administration cosole?
thanks

with me it was amadmin : admin123
in the readme file in the addons directory:
Done! Access the AM server URL and see if the Access Manager is working or not -
<amserver_protocol>://<amserver_host>:<amserver_port>/amserver
user : 'amadmin', password : <admin password>
in a config file i found the password was admin123

ITunes and Wake for network access

I recently purchased a Logitech Squeezebox music server for the game room. It plays music from my iTunes library remotely (among other things). I set up everything and all is working fine. However, if my iMac goes to sleep, it wouldn't connect. So, I checked the Wake for network access in the energy saver control panel. This also works fine. However, if I have iTunes running on my iMac and wake for network access checked, then the iMac will NEVER sleep. It won't sleep on time out, it won't sleep when selecting from the Apple menu or from the power button. I did some farily extensive testing and if iTunes is running and wake for network access is NOT checked, all is fine.
I don't do any library sharing and have genius turned off. It appears that when iTunes is running, there is something on the network trying to connect to it.
Any ideas?
I am running iTunes 10.2.2 (haven't changed in a while) and OS 10.6.7.

Anybody have any ideas?

Ask the Expert: Plan, Design, and Implement Mobile Remote Access, the Cisco Collaboration Edge Architecture

Welcome to the Cisco® Support Community Ask the Expert conversation. This is an opportunity to learn and ask questions about planning, designing, and implementing mobile remote access (Cisco Collaboration Edge Architecture) with Cisco subject matter experts Aashish Jolly and Abhijit Anand.
Cisco Collaboration Edge Architecture is an architecture that provides VPN-less access of Cisco Unified Communications resources to Cisco Jabber® users. This discussion is dedicated to addressing questions about design best practices while implementing mobile remote access.
For more information, refer to the Unified Communications Mobile and Remote Access via Cisco VCS deployment guide.
Aashish Jolly is a network consulting engineer who is currently serving as the Cisco Unified Communications consultant for the ExxonMobil Global account. Earlier at Cisco, he was part of the Cisco Technical Assistance Center (TAC), where he helped Cisco partners with installation, configuring, and troubleshooting Cisco Unified Communications products such as Cisco Unified Communications Manager and Manager Express, Cisco Unity® solutions, Cisco Unified Border Element, voice gateways and gatekeepers, and more. He has been associated with Cisco Unified Communications for more than seven years. He holds a bachelor of technology degree as well as Cisco CCIE® Voice (#18500), CCNP® Voice, and CCNA® certifications and VMware VCP5 and Red Hat RHCE certifications.
Abhijit Singh Anand is a network consulting engineer with the Cisco Advanced Services field delivery team in New Delhi. His current role involves designing, implementing, and optimizing large-scale collaboration solutions for enterprise and defense customers. He has also been an engineer at the Cisco TAC. Having worked on multiple technologies including wireless and LAN switching, he has been associated with Cisco Unified Communications technologies since 2006. He holds a master’s degree in computer applications and multiple certifications, including CCIE Voice (#19590), RHCE, and CWSP and CWNP.
Remember to use the rating system to let Aashish and Abhijit know if you have received an adequate response.
Because of the volume expected during this event, our experts might not be able to answer every question. Remember that you can continue the conversation on the Cisco Support Community Collaboration, Voice and Video page, in the Jabber Clients subcommunity, shortly after the event. This event lasts through June 20, 2014. Visit this forum often to view responses to your questions and the questions of other Cisco Support Community members.

Hi Marcelo,
Yes, there are some requirements for certificates in Expressway.
Expressway Core (Exp-C)
- Can be signed by either External or Internal CA
- Better to use a cluster name even if you start with 1 peer in Exp-C cluster. In the future, if more peers are added, changes would be minimal.
- Better to use FQDN of cluster as CN of certificate, this way the traversal zone configuration on Expressway-E won't require any change even if new peers are added to Exp-C cluster.
- If CUCM is mixed mode, include security profile names (in FQDN format) as Subject Alternate Names
- The Chat Node Aliases that are configured on the IM and Presence servers. They will be required only for Unified Communications XMPP federation deployments that intend to use both TLS and group chat. (Note that Unified Communications XMPP federation will be supported in a future Expressway release). The Expressway-C automatically includes the chat node aliases in the CSR, providing it has discovered a set of IM&P servers.
- For TLS b/w CUCM, IM-P & Exp-C
+ If using self-signed certificates on CUCM, IM/P. Load Cisco Tomcat, cup, cup-xmpp certificates from IM-P on Exp-C. Load callmanager, Cisco Tomcat certificates from CUCM on Exp-C.
+ If using Internal CA signed certificates on CUCM, IM/P. Load Root CA certificates on Exp-C.
+ Load CA certificate under tomcat-trust, cup-trust, cup-xmpp-trust on IM-P.
+ Load CA certificate under tomcat-trust, callmanager-trust on CUCM.
Expressway Edge (Exp-E)
- Signed by External CA
- Configured Unified Communications domain as Subject Alternate Name
- If using a cluster, select FQDN of this peer as CN and FQDN of Cluster + this peer as Subject Alternate Name.
- If XMPP federation is being deployed, enter the same Chat Node Aliases as entered in Exp-C.
For more details, please refer to the Certificate Creation Guide for Cisco Expressway x8.1.1
http://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/expressway/config_guide/X8-1/Cisco-Expressway-Certificate-Creation-and-Use-Deployment-Guide-X8-1.pdf
- Aashish

LDAP vs local login for remote access

Hi Team,
I am evaluating the best means for single factor authentication for remote access (client to site or SSL VPN). The options I see are creating local usernames and password or integration with Active Directory via LDAP. What are the pros and cons of these solutions.
I feel local logins are more secure comparitavely because the user first login using local login and password and then has to use the domain credentials for accessing corporate resources. Of course, this comes at an admistrator overload and local management of user names and passwords. Do you have any opinion on this? Any acknowledgement will be highly appreciated.

Hello Manoj,
IMO, I would never consider the LOCAL DB as an option for a corporate deployment. It does not scale and it is not easy to manage.
Local DB is used in case you need to manage a number of 15 users for instance, so in this case it is managable, but when it comes to a higher number it is not an option.
Active Directory is a better solution since it is meant to handle hundred of users and allows password-management for instance. Also you can have many ASA devices, performing DB bindings and queries to check the users credentials to the AD servers, so you don't need to deal with tons of user accounts on each ASA, for instance.
If you are looking for a more secure way to authenticate your users you can consider two-factor authentication using certificates for instance:
AnyConnect Certificate Based Authentication.
Why to use AD:
Pros
Scalable.
Easy to manage.
Allows password-management.
Cons:
Expensive (not open AD solution).
HTH.
Please rate helpful posts.

Desperate help needed to configure WVC210 for remote access?

Hi, I'm new and desperately need some help on setting up my WVC210 for remote access.
I manage to setup and see images from my WVC210 using my home LAN via both wired and also wireless.
I have 2 questions:
(a) for wireless connection, i only manage to get connection to my WVC210 if i disable the wireless security from my router. But that means i'm opening my wireless LAN to everyone. How can i still get connection to the camera if i enable the wireless security from my router. (FYI: my router is 2Wire ADSL from Singnet Mio)
(b) how can i get connection to my WVC210 from outside or in my office? I type in the camera Fixed IP address (displayed on the front screen) on the web browser, by it shows a error page. Is there some setting that i might need to adjust ?
Pls kindly help me
Thank you.

Bernard,
For Item (2) is there any difference between the camera built-in dyndns updater versus the software updater? I am under the impression that the software updater is easier to manage.
The biggest difference for you is that the camera always stays at the same location, and the laptop goes with you. Every time you access the internet from a different location with the laptop the software updater is sending the new IP address to dyndns.com. This causes you to lose access to your camera because the FQDN doesn't point to your home IP address anymore. Once the dyndns credentials are in the camera (or router) there is no management needed. The device will automatically update dyndns.com with your new IP address as it changes, and you do not need to do anything.
For Item (3), are you saying port forward 1025 is it for the 2nd camera only or for both? Or is it 2nd camera use 1025 and first camera use 8080?
Here's an example of what I mean:
Camera 1: 192.168.1.210 port 1024. In router, forward port 1024 to 192.168.1.210
Local Access: http://192.168.1.210:1024
Remote Access: http://bernards210.dyndns.org:1024 (Example)
Camera 2: 192.168.1.211 port 1025. In router, forward port 1025 to 192.168.1.211
Local Access: http://192.168.1.211:1025
Remote Access: http://bernards210.dyndns.org:1025 (Example)
Camera 3: 192.168.1.212 port 1026. In router, forward port 1026 to 192.168.1.212
Local Access: http://192.168.1.212:1026
Remote Access: http://bernards210.dyndns.org:1026 (Example)
to access the 2 camera outside, do i have to have another dyndns host name or can i use the current one for both camera?
As you can see in the above example, the dyndns name remains the same for remote access to all three cameras. The only change is the port number at the end. Your router will translate the port number to the IP address that the port is forwarded to, allowing you to select the camera that you wish to view by changing the port number in the address.
I was actually thinking that the camera web browser can show 2 camera at the same time. Is it possible?
No. Each browser window will display a single camera. You can however opens multiple instances of your browser to allow viewing of more than one camera simultaneously. A better solution is to install the Video Monitoring Software that is included with the camera which allows you to view multiple cameras in the same window.

How to Use synchronous RFC calls during test run for remote accesses

there is a Setting for the usage of RFC accesses from a tested system
using eCATT.
'X' - Use asynchronous RFC calls during test run for remote accesses
' ' - Use synchronous RFC calls during test run for remote accesses
I developed an eCATT as following :
SAPGUI ( SAPGUI_1 , Target_system_1 ).
SAPGUI ( SAPGUI_2 , Target_system_2 ).
My question is how to run the eCATT in a synchronous RFC calls
PS: I do not want to change the Target_system to the same one in the
above script of ecatt.Because I need to run it in 2 different Target
systems sometime.
for example, I give a Target_system_3 when run this eCATT
I want the SAPGUI_1 and SAPGUI_2 run the Target_system_3 but not the
Target_system_1 or Target_system_2 .
Could you please tell me how to make it without the changes in script?
Edited by: Weitong Liu on Mar 24, 2011 9:44 AM

Hi Liu,
Weitong Liu wrote:
> ' ' - Use synchronous RFC calls during test run for remote accesses
This is the standard option value. Asynchronous are not the standard way and used only for very special purposes.
Weitong Liu wrote:
> I developed an eCATT as following :
> SAPGUI ( SAPGUI_1 , Target_system_1 ).
> SAPGUI ( SAPGUI_2 , Target_system_2 ).
> My question is how to run the eCATT in a synchronous RFC calls
The commands will be executed in sequence. So each call will be synchronously replayed against TS1 and TS2.
What is you issue with this standard procedure?
Kind regards,
Christoph

How to enable second HD DVR for remote access?

I easily got my first HD DVR setup for remote access and it worked perfetly for 1 day, then it stopped working. After 2 hours on the phone with tech support, we got it to work again. However, we were unable to get my second DVR setup. He said that I could only have one DVR setup for remote access, is that true? If not, any assistance would be much appreciated.
Thank you!

glcockrum wrote:
I easily got my first HD DVR setup for remote access and it worked perfetly for 1 day, then it stopped working. After 2 hours on the phone with tech support, we got it to work again. However, we were unable to get my second DVR setup. He said that I could only have one DVR setup for remote access, is that true? If not, any assistance would be much appreciated.
Thank you!
Are you speaking of Remote Access from the Web? ...or from a mobile phone?
For Web Access it is absolutely NOT TRUE!
I have TWO DVRs. I can access both remotely from the web and schedule or delete recordings.
The tech MAY have been speaking of (or confused about) the MULTI-ROOM capability that the DVR's have.
Only one of the DVRs can be (and is) a Home Media (or Multi-Room) DVR, and therefore can share recordings with my other NON-DVR STB and communicates with any computer on my home network for PC-based Audio, Vieo and Image files, as well as connecting to the certain Internet video streaming sites.
The other DVR is a standalone machine is this regard, but regardless, it still has remote access to control it from the Web.
(I do not know anything about the Remote Access from a mobile phone capability, since I do have a Verizon Wireless contract. THAT Remote Access may indeed be limited to just a single DVR.)

Configure Time Capsule for remote access

I have a second generation 2TB Time Capsule, operating on Bridge Mode, connected to an Arris Touchstone Telephony Gateway TG862. I want to configure Back to My Mac to be able to access the Time Capsule remotely.
I've followed the basic steps and get this message from the settings in the iCloud Pane in System Preferences: Setup router for better performance. And this details: Contact your ISP for a different server address.
I've tried Google and OpenDNS, and also disabling the Firewall in the Arris router, and still can't access the Time Capsule remotely.
I also tried disabling NAT and seeing it up as Bridged in the router, and disabling Wireless as well, trying to configure the Time Capsule to serve NAT and DHCP to no avail.
Any steps I'm missing or a whole different approach I should take to be able to access my Time Capsule remotely?
Thank you in advance for any help.

You will have to learn how to port forward in your Arris Gateway..
Arris Touchstone Telephony Gateway TG862
The easiest way is to simply google it.
http://forums.comcast.com/t5/Home-Networking-Router-WiFi/Port-forwarding-in-Arri s-TG852G-CT/td-p/954929
It certainly appears to be problematic.. which is not surprising... If you really need remote access I would request a pure modem from your ISP (Comcast??) or simply replace it with one in the list. You will need to turn off any inbuilt firewall in the router and use DMZ perhaps to the TC.
There is a few posts on youtube which also might help you. eg
https://www.youtube.com/watch?v=_8tKBHvCz_0
But I am on ADSL so my setup is too unlike yours to really tell you much.
If you want to test something.. let me recommend you load Teamviewer onto a computer in your LAN.. set the computer up to never sleep and then try and reach it using Teamviewer from WAN connection.. if that works.. let me recommend you stick to something of this type. Unless you are prepared to change modems with your ISP I doubt you will solve it.
If teamviewer fails nothing is going to work.. you need to at least turn off the firewalls in both the computer and the router..
If you don't want to leave a computer running 24/7 to accept incoming requests.. then use WD MyCloud or similar type NAS.. which are far better designed for remote access than Apple routers.. or use a cloud storage and keep files you might want there.

NAT for remote access VPN clients

Hello,
I have a simple remote access VPN setup on a 2811 router. The remote subnet of the clients connecting have access to the local LAN subnet, but I am wondering if it is possible to somehow NAT those remote access users, so that they can go beyond the local LAN, and through the VPN routers outside connection, giving them access to other resources.
The remote subnet would need to be added to the NAT overload pool that the local LAN is on somehow, but since no interface is created, I am unsure where I would need to put "ip nat inside" if it even needs to be done, or if I am just missing something.
I guess really what I want to do is tunnel all traffic, and have that remote client IP translate to the NAT pool on the router for internet access.
Thanks.

Have a look here for solution
http://www.cisco.com/en/US/products/sw/secursw/ps2308/products_configuration_example09186a008073b06b.shtml
Regards

VPN between XP client IPSec and IOS for remote access

Similar Messages

Maybe you are looking for