VPN button in Control Center (Wishlist)

Hi,
One thing i can sugest Apple is to add the VPN Button to the control center app, it would really help us business users.
Best regards,

I wish that too. I use the VPN all the time on my phone. You may want to send apple feedback. http://www.apple.com/feedback/iphone.html
I'll do it too.
Mike

Similar Messages

The play and pause buttons in control center

the play and pause buttons in control center some times work and some times not !!!
any solution please ? !

Hi m-tillawy,
Thanks for using Apple Support Communities. I would try a restart/reset of the iPhone:
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/HT1430
If the issue persists after that, I would attempt a reset of all settings as per this article:
Reset iPhone Settings - iPhone User Guide
http://help.apple.com/iphone/7/#/iph7a2a9399b
Reset iPhone settings
Reset iPhone settings. Go to Settings > General > Reset, then choose an option:Reset All Settings: All your preferences and settings are reset.
Cheers,
- Ari

P67A GD65, OC genie 2 button in Control Center, doesn't boot anymore

My conf. (sorry I don't speak english):
i7 2600k
MSI P67A-GD65
2x2GB Kingston Hyperblu PC-1600
SSD Vertex II 160GB
Gygabyte gtx 560TI SOC
- OC Genie 2 in motherboard pressed
- Yesterday in Windows 7 x64, I clicked the OC genie button in control center, I click on no reboot, I click again on the oc genie button (to leave it as it was), no reboot. All OK. Today PC can't boot anymore: fans on, 6 phases leds on, 6 phases GTX leds on, no USB, no video...
What I can do, or did I broke the motherboard with two mouse clicks?

do >>Clear CMOS Guide<< with power cord removed
also what psu you use?

Start Button from Control Center Manager OWB 10.2.0.3.33

Hi Folks,
the start Button from the Control Center Manager is grey and I cannot run drop, replace, etc. jobs. I've tried with the owb owner with the same result. The Service is running. I also restart the data base but again the same result. Any ideas...?
Thanks
Pavel

Please forgive the simple first question:
Have you deployed these objects yet?

Since upgrading to IOS 8 on 5S I have no AIRPLAY button in control center

What has caused my AIRPLAY BUTTON to vanish in the Control Center after upgrading to IOS8 on my 5S?
Only shows AIRPLAY now!

Hello Chipfxr,
If I understand correctly it sounds like you are not seeing your Airplay option in the Control Center, but your last sentence makes me wonder. If that is correct then use these steps from the following article to help figure out why the Airplay button is not there:
Resolve issues with AirPlay and AirPlay Mirroring from iPhone, iPad, and iPod touch
Try these steps first
Verify that your iOS device's software is up to date.
Verify your Apple TV's software is up to date.
Verify that your iOS device has Wi-Fi turned on. Go to Settings > Wi-Fi on your iOS device and turn on Wi-Fi.
Connect all AirPlay-enabled devices to the same Wi-Fi network.
Go to Settings > General > Network on your Apple TV to see which Wi-Fi network it's connected to. On your iOS device, tap Settings > Wi-Fi and confirm it's on the same network as your Apple TV.
With peer-to-peer AirPlay, an iOS device can stream to Apple TV without first joining the same Wi-Fi network. Find out if your iOS device can use peer-to-peer AirPlay.
If the AirPlay icon doesn't appear
Ensure that you have followed the steps in using AirPlay and AirPlay Mirroring.
If you are still unable to see the AirPlay icon , try one of these steps:
If trying to AirPlay, or AirPlay mirror, to your Apple TV, ensure that AirPlay is enabled on your Apple TV as well. You can enable or disable AirPlay on Apple TV in the AirPlay menu: Settings > AirPlay.
Check Internet or network connectivity on all affected devices.Some content requires an Internet connection to authorize content playback. AirPlay capabilities may be limited if your network is not connected to the Internet.
If attempting to use AirPlay from a third-party app or a website from your Safari app on your iOS device, confirm that the app or website is AirPlay compatible (refer to the developers of the app or website for additional information).
If that is not correct, then can you elaborate a bit more?
Thank you for using Apple Support Communities.
Cheers,
Sterling

HT5858 IT WOULD BE REALLY HELPFULL IF CONTROL CENTER HAD A BUTTON TO TURN ON CELLULAR DATA. Could you(APPLE) please take this in consideration for the next update?

What do you guys think?

Logically, because unlike you I do not keep my cellular data on at all times as I do not have an unlimited data plan. I only turn on cellular data when I am on the go and I do not have access to a wifi network. Therefore my need for a button in control center that turns on cellular data. And this would be very usefull to other iPhone users outside the US and Canada, where unlimited cellular data plans are not so affordable.

Ipad 2 updates to ios7, no Airplay visible on controll center

Hello,
Unfortunately I could not find the Airplay button on controll center.
Same to you?

Reset: Hold the Sleep/Wake and Home buttons and don’t let go until the screen goes dark and the Apple logo appears (no data will be lost)
Settings > General > Reset > Reset All Settings (You will not lose any data but it will reset the settings in your Settings app.)
Backup, Connect to iTunes and restore. This will download and clean install iOS7. After it finishes, walk through the setup and restore from backup when prompted.

Enabling OC Genie II from Control Center downgrades the CPU?!?! Z77A-GD65

Now I'm getting all the time more and more confused about this Z77A-GD65 with Intel i7 3770K over-clocking. I really hope that someone could help.
OK, there's a button on the motherboard that by enabling it the system automatically overclocks itself during the next boot. OK, fine. But what is that OC Genie II button in Control Center supposed to be? After enabling the OC button on mainboard and rebooting the CPU multiplier goes up from the default 35 to 42 and that's fine. But when enabling the OC Genie II overclocker from within Windows (from MSI Control Center) and rebooting, then the clock multiplier downgrades back to 35 ?!?!?! Why is that?
How is the Control Center supposed to be used for overclocking? Does it have a bug or something? At least it doesn't seem to work for me? Should the BIOS be reset to default values first or something? Should the OC Genie button on the motherboard be enabled at all?
However I would be happy to be able to automatically tune-up my system directly from Windows 7 (X64, SP1) but I don't know how to do it.
And why there's a button on the motherboard if the over-clocker is supposed to be working from within Control Center? Which one should I use and how? Moreover, should I have the main setting set (via reboot --> BIOS) set to STANDARD or OC GENIE II? I have so much trouble understanding all this..
PLEASE PLEASE HELP! Thank you friends.

Quote from: xmad on 26-September-12, 09:17:04
Go into bios and in the OC section, change "OC Genie Function Control" from By onboard button to "by bios option" see if that works better.
Also, most people don't use control center for more than monitering. I do all of my overclocking from UEFI/Bios and check on things in click bios II.
OK, thank you! That's exactly what I needed to know! So the Control Center's (within Windows) "Use OC Genie" shouldn't be used either? I suspect that this being enabled has got something to do with my poor ATI RADEON HD5770 performance. I'm currently experimenting it, don't know yet. But I will try disabling OC Genie from Control Center.
But should I disable the oc Genie button also on the motherboard itself? How would that affect things? Easier/harder to overclock the MB with OC Genie enabled? These current MB's are so damn complicated But I'd appreciate any help!

HT5957 Why dont you add CELLULAR button in the control center? Isn't it easy to acces?

I think it is a good idea to add cellular option also in the control center, which would make it easy to switch on or off the internet fast..!!!

Am I missing something here?
WIth the compose window open, choose Edit>Customize Tool Bar and drag the Address button to your tool bar.
You can also just start typing a reciepeints name in the To field and Mail will suggest addresses.
Matt

On iPad, control center won't work; music buttons do not respond AT ALL. What can I do?

I have an iPad 3, and the control center is giving me a hard time, both, within app access and on lock screen and it's only the music controls in particular; play, next, and previous buttons will not respond at all. Anyone having the same issues? If so, any suggestions to work this out? I already tried turning off and on, form control center settings.

Reset the device:
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset All Settings
No data is lost due to a reset.

Control Center customizable button

For the next generation of IPads Software, could you consider adding a customizable button on the Control Center for quick access to a function that the user chooses? In this way, the user could decide on what this button would do.
(Ex: I would configure a button for quick access to "Invert Colors" from the setting/general/accessibility page).
We quite often use IPads at night in Aircraft cockpits and this function would allow for a quick shifting to a “Night Mode” type display by greatly reducing the display brightness.
Louis

Thanks.
Actually, after talking to a user, I found out that a this feature is available through the triple click function of the home button, as long as the Accessibility
Shortcut has been configured accordingly.

Airplay button missed on Control Center iOS7.

This is driving me nuts. I have an ipad 4 with iOS 7.0.3 and a Mac Mini late 2012 with Mac OS Mavericks. And I can't use airplay, (neither airdrop but at least I see the airdrop option on control center on iPad).
Both devices are in the same network.
Both are up to date.
I already reboot and reset the iPad and the Mac mini and the router.
Both devices are like brand new but it seems that doesn't work anything. On the iPad I can acces to any photo and then I see the airplay icon in the shares option but only reconigze the iPad itself. Also I see in mavericks in System Preferences> Displays> Airplay Display : No devices detected. The only thing that works in both devices is the wireless sync with iTunes.

If you don't see the AirPlay icon in the Control Center:
1. Turn off router, Apple TV and iPad
2. Turn on router and then wait 30 seconds for it to complete start-up process
3. Turn on Apple TV and then wait 30 seconds for it to complete start-up process
4. Turn on iPad (wait 30 seconds) and test AirPlay

My play and skip button will not work on the control center and lock screen

For the first few days I had iOS 7, everything worked fine. Now the Control Center and lock screen will not play, pause, or skip through my music or iTunes Radio. It works fine within music but I would prefer not to have to unlock my phone every time I want to skip a song. Anyone having this issue/know of a way to fix it?

I didn't have that problem, but I had many others. I've always been a fan of Apple but I'm really disappointed with the latest updates. iOS 7 is full of bugs, the worst being in my music app. It crashes, both in my iPhone 5 and iPad 4, it keeps autosyncings songs from the cloud I don't want (and I can't get them erased), plays a song, but shows a different song, to name just a few... I hope they fix this asap, cause that's really annoying me.

Control center doesn't work all the time in iOS 8

I have the new iPhone 6+ and have noticed that sometimes I can't pull up control center.
I have to unlock it, then lock it again and then it will pull up. I use this method to access the torch at night.
Also to switch off the torch when the phone is locked, the camera icon could be tapped. However this feature doesn't work anymore.
Now I have to click the home button > swipe up the control center (hopefully it works) > tap the torch icon.
It used to be easier when you could just click the home button > tap the camera icon.
Please fix these issues soon.

You are not addressing Apple here, we are users like you, so we cannot fix these issues. If you would like to tell Apple what your problem is, then you can leave them feedback HERE. Click on the appropriate link.
However, if you want to try and troubleshoot your Control Center issue, then I would go into Settings>Control Center>Access on Lock Screen and if that is on, turn it off and back on again. Also, when accessing Control Center from the lock screen, make sure you are starting off of the screen when you begin to swipe upwards. That tends to work better. Sometimes starting on the screen, the finger does not get low enough for it to register.
As far as the flashlight button, I never attempted to turn it off with the camera, I just tapped in Control Center.

Launching a Preview Session Outside the ATG Business Control Center

I have setup a remote preview server on ATG 10.1.1. Everything works great when viewing it inside the BCC however I’m wondering how to access the preview server outside the BCC. According to the ATG documentation, it sounds like that’s possible. The ATG docs state:
“Users can preview project asset changes outside the framework of the Business Control Center. For example, you might want employees or outside reviewers who do not have access to the Business Control Center to evaluate changes to a Web application while it undergoes development. In this case, you can enable preview on servers that do not have the Business Control Center installed, then give reviewers URLs to the launch pages on these servers. They can invoke these URLs from any browser window.
Note: Users who are not logged into the Business Control Center can invoke preview sessions only with URLs to a server where the Business Control Center is not running. In order to avoid security breaches, URLs to preview sessions on the Business Control Center server are blocked.”
This is the only information I found in the documentation that talks about viewing preview outside the BCC. Based on this limited information, there are a lot of questions I have about how this actually works.
1. Any attempt to hit any page on my remote preview server outside the BCC, I see the following exception:
“ERROR [PreviewProfileRequestProcessor] An attempt was made to preview a project without logging in as a user with access to publishing assets. If you are running a local preview instance, the preview URLs registered with the PreviewURLManager may be misconfigured. Ensure that the preview URLs are configured with the same host and domain name used to access the BCC server. This preview request URL is: http://localhost:8280/sample_catalog/index.jsp. If you are running a remote preview instance, the Preview feature does not support remote preview on servers running the BCC. Ensure that the remote preview instance is not running any of the BCC related modules. If you received this error and did not try to perform a remote preview, then you may need to disable preview in the current web application by setting the atg.preview context parameter to false in the webapps web.xml file.”
I am not running the BCC on this instance so I’m not sure why I am seeing this. Is there something configuration I'm missing here?
2. I don’t understand where these urls would come from that a reviewer would use to preview the application. There is no "remote preview url" when previewing a page from within the BCC to copy and send to a reviewer so how would a BCC user send a url to a reviewer?
3. Assuming the reviewing knew which page to hit in the remote preview server, how would that page use the assets from a project? Should the project id of the project be include as a param to the url?
- Michael

Shaik, if only it was that simple :( Do you have much experience working with remote preview or are you just guessing here like I have been? In order to help clarify my post though, here is the scenario that describes the basis for my questions:
A business user is working on a project within Merchandising of the BCC
1.     The user makes a change to a category
2.     The user clicks the Preview Button on the tool bar
3.     The system displays the Preview launcher screen
4.     The user selects a pre-configured profile user and page for the preview session
5.     The user clicks the Flexed based launch button
6.     The application displays within the context of the BCC browser/tab
7.     The business user would like to send that url to a reviewer who does not have access to login to the BCC
What happens from step 6 is that a giant iframe launches from within the context of the BCC browser/tab. If you are using remote preview, it is still an iframe and still displays within the context of the BCC browser/tab, the only difference is that the BCC is proxying information to the preview instance in order to initialize the preview session to display the application in the context of the business user’s project. The url the user sees in the browser is the url for the BCC, not the remote preview server. Because the UI for Merchandising and Preview is built using Flex, there is no way to click on the Preview button to open it up in another tab or browser. The only way your suggestion would work is if there is a way to configure the Flex UI to have it open up preview in a new browser/tab which I doubt is possible.
I hope this helps better explain my post. With that said though, this brings me back to my original questions.

VPN button in Control Center (Wishlist)

Similar Messages

Maybe you are looking for