VPN Causes Xserv to slowdown and stops services
Hey guys,
I have noticed when someone vpn's into the server it causes the other services that are running to slow down and gives the spinning domino's at the bottom of the server admin screen and all of the services that are indicated by the green buttons get hyphens on them. Everything on the server is movable, like mouse so I know the server is not locked up but I can notice that when someone vpn's it causes the services to go slower and causes the mail to give errors on people on our network. Any suggestions??
G5 Xserv Mac OS X (10.4.9)
VPN clients are given 10.20.100.201 - 209
DHCP clients are given 10.20.100.10 - 200
Servers are >.10 and printers are <.210 for our office.
I set the routing definition to 10.20.100.0 // 255.255.255.0 // private
The server has 3 NIC cards inside it.
The Built in NIC (eth0) is serving the 10. subnet with an address of 10.20.100.1
eth1 is an apple gig-e card, connected to our SDSL line with a static IP
eth2 is an apple gig-e card, connected to nothing.
I am able to connect SMB shares on the server when connected to the VPN by entering their implicit path in windows //server01/sharedocs, or by afp://10.20.100.1 once the connection is made.
While I remain connected the server is still allowing mail & WebDav connections to our Kerio mail, and webmail users can still get mail. However within a few minutes of disconnecting no one is able to get mail either through entourage, mac mail, outlook or webmail. I am at that point unable to SSH or Timbuktu Pro connect to the server (they time out) i can bring up webmail, and log in, but it hangs at that point, I can bring up the Admin HTTPS page of the kerio server and view settings and status (0 clients connected)
I am wondering if this isnt some issue between the VPN and OpenDirectory, because SSH uses the usernames in open directory, so is Timbuktu, the mail server is getting its users from open directory, so is WebDav, but the Admin account of the webmail is hardwired into the server and not pulled from OpenDirectory. I have nothing but that to go on, and i lack the knowledge to know where to look to test that theory.
Similar Messages
-
Batch file to start and stop services
I've setup a CF Probe on my Development Server to ensure my
CF Production server is up and running (services = Apache and CF
Application Server). It checks the PROD login page and if it times
out in 30 sec the probe fails. I understand I can execute a file
(batch file with net start and net stop) but the problem is I need
to have the probe somehow point to the .bat file on the PROD server
and not on the local machine. How can I remotely access this batch
file and execute it? I don't know how to point to the file on the
other server... can anyone help?Hi Ken,
You had pointed me in the right direction regarding the
psstools in order to create a batch file that can remotely start
and stop services.
i used the psexec command and am able to successfully restart
the services needed remotely... however when i pick the file in the
coldfusion administrator (in the probes section) how to i point to
the batch file to run? it seems like the probe is not running the
script like i want... the file is located on the c:\ so i entered
c:\test2.bat...
Thanks,
Matt
Matt,
You should review the online help in the cfadmin for probes
and the links it points you to in the developer's guide. Basically
you need to define a new probe in the cfadmin by clicking the
"Define New Probe" button. One of the probe's attributes will be
what action. Define the action as a program and point it at a batch
file running psexec. You will probably need to run CFMX as a
specific user and not as localsystem, which is the default. -
Does Golden Gate provide any Webservices to start and stop services?
Hi all,
We are trying to use GG in our application. But we need a way to start and stop services from java code.
Is there any Webservice interface or API to start and stop Golden gate services like GG manager, extract and replicat processes??
Thanks in advance for your help.
Yamini.You can control this at a database level using EVENTACTIONS parameter.
Create a table at source & target called "EVENT" with field EVENT_TYPE ( example names only - please call it what you like ) .
at Replicat config actions based on the data passed into the EVENT_TYPE column
MAP GG_ADM.EVENT TARGET GG_ADM.EVENT, &
FILTER ( (@STREQ(@IF(@COLTEST(EVENT_TYPE,PRESENT),EVENT_TYPE,"No EVENT"),"STOP") = 1)), &
EVENTACTIONS (IGNORE , LOG,STOP);
You'll need a seperate replicat to handle the start
MAP GG_ADM.EVENT TARGET GG_ADM.EVENT, &
FILTER ( (@STREQ(@IF(@COLTEST(EVENT_TYPE,PRESENT),EVENT_TYPE,"No EVENT"),"START_APP_02") = 1)), &
EVENTACTIONS ((SHELL (${GG_HOME}/diroby/start.ksh R1APP_02 )));
Hope that helps -
Starting and stopping services of SAP and database
pls tell what are the Starting and stopping services of SAP and database
Hi Ranga,
The services dealing with SAP and database(Ex: Oracle in this case) are:
SAP<SID>_<Instance No.> (For ex: SAPECC_01)
SAPOsCol
Oracle<SID><No>Listener
OracleCSSservice
OracleService<SID>
Reward points if it is helpful##
Thanks & Regards,
Santhosh P
Please change the status to answered if you got the solution...
Message was edited by:
Santhosh Kumar P -
EHPI not able to start and stop services shadowsystem
All,
I am working on an installation of EHP4 but am running in the following issue:
When I get to the phase SHDINST_OS the EHPI is not able to stop and start the service for the shadowsystem. The ehpi log gives:
Phase SHDINST_OS:
SAPehpi> Starting subprocess sapstartsrv.exe with id 7348 at 20100512081320
Environment: JAVA_HOME=C:\Program Files\Java\jdk1.5.0_19
Environment: PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC
Environment: Path=C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files (x86)\Microsoft SQL Server\90\Tools\binn\;C:\Program Files (x86)\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files (x86)\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;C:\Program Files\Microsoft SQL Server\90\DTS\Binn\;F:\usr\sap\HRS\SYS\exe\uc\NTAMD64;F:\usr\sap\HRS\SYS\exe\nuc\NTAMD64
Environment: auth_shadow_upgrade=0
Environment: dbs_mss_schema=hrs
Service not started.
Process with ID 8132 terminated with status -1
The EHPI gives:
An error occurred during the installation of the
SAP service SAPHRS_03:
Possibly the password for user .\SAPServiceHRS entered in phase
INITPUT was wrong. You can reset it by calling 'SAPehpi set stdpar'.
Try to execute SAPSTARTSRV.EXE manually using the following syntax:
G:\EHPI\abap\exe\sapstartsrv.exe -r
-p G:\EHPI\abap\HRS\SYS\profile\START_DVEBMGS03_NLDBHRS01 -s HRS -n 03
-U .\SAPServiceHRS -P <PASSWORD> -e NLDBHRS01\hrsadm
and check if the service SAPHRS_03 can be stopped and restarted.
When I follow up on the sapstartsrv first I can start/create it but that when I restart the EHPI it fails again on the same issue.
Anybody any ideas?
the passwords given in the EHPI are the ones of the SAPService user in the windows environment
ChrisHi
Have you tried below option as suggested in logs ?
> Possibly the password for user .\SAPServiceHRS entered in phase
> INITPUT was wrong. You can reset it by calling 'SAPehpi set stdpar'.
> Try to execute SAPSTARTSRV.EXE manually using the following syntax:
> G:\EHPI\abap\exe\sapstartsrv.exe -r
> -p G:\EHPI\abap\HRS\SYS\profile\START_DVEBMGS03_NLDBHRS01 -s HRS -n 03
> -U .\SAPServiceHRS -P <PASSWORD> -e NLDBHRS01\hrsadm
> and check if the service SAPHRS_03 can be stopped and restarted.
>
Thanks
Sunny -
Starting and Stopping Services Based on Network
Hi everyone,
This is something I've been playing with and I'd like to share it with you and get your thoughts.
The services I want to run at any given point depend on what network I'm attached to. For example, if I'm at home, I'll want avahi-daemon and cupsd started but I won't need iptables, since I'm behind my router's firewall. On the other hand if I'm at an internet cafe I need iptables but not the other two.
What I've done is set up a script in /etc/NetworkManager/dispatch.d which starts services based on the UUID of each connection (extracted from that connection's file in /etc/NetworkManager/system-connections.
I'm currently using the following script:
#!/bin/bash
IF=$1
STATUS=$2
function start_service {
for i in "$@"
do
if [ `/usr/bin/systemctl show "$i".service | grep -c "ActiveState=inactive"`=1 ]
then
/usr/bin/systemctl start "$i".service
fi
done
function stop_service {
for i in "$@"
do
if [ `/usr/bin/systemctl show "$i".service | grep -c "ActiveState=active"`=1 ]
then
/usr/bin/systemctl stop "$i".service
fi
done
if [ "$IF" = "wlan0" ] && [ "$STATUS" = "up" ]; then
UUID=`nmcli --nocheck -t --fields UUID con status`
case $UUID in
f5320fcd-43e2-4cc1-ba1a-9606f66b5332)
start_service avahi-daemon cupsd
logger "M5DKQ (home network) up"
5bfff3c5-c349-436b-953b-90de15c854d7)
start_service iptables
logger "EVO (4G hotspot) up"
40d74743-f809-41ce-821c-71f9f40b8513)
logger "GuestAccess (office guest network) up"
start_service iptables
logger "Starting cafe-specific services"
esac
fi
if [ "$IF" = "wlan0" ] && [ "$STATUS" = "down" ]; then
stop_service avahi-daemon cupsd iptables
logger "Stopped location-specific services"
logger "wlan0 down"
fi
Is there a better way to do this, like maybe a systemd custom target? Is there a cleaner way to script this?
Thanks in advance,Hi Ranga,
The services dealing with SAP and database(Ex: Oracle in this case) are:
SAP<SID>_<Instance No.> (For ex: SAPECC_01)
SAPOsCol
Oracle<SID><No>Listener
OracleCSSservice
OracleService<SID>
Reward points if it is helpful##
Thanks & Regards,
Santhosh P
Please change the status to answered if you got the solution...
Message was edited by:
Santhosh Kumar P -
Maxl Script to Start and Stop Service
Hi All,
to stop essbase service i had used below script in maxl but it did not work
alter system shudown;
is there any script that i want to stop Essbase services through MAXL ?
is there any script i want to start essbase services through MAXL?
ThanksIts as simple as this :
alter system kill request all;
alter system logout session all;
alter system unload application all ;
alter application 'App' disable connects;
Use all these when you are trying to Isolate the system from users .
But to answer your question Unload command is nothing but Stop , load is start ! -
Automate OBIEE stop and start services.
Hi All,
We are using OBIEE10.1.3.4 version on windows envorinment.In Production instead of doing manual start and stop services we need to automate one batch file that batch file has to bounce all the OBIEE services.And we need one batch file for clear all the cache enties.
can u advice me how to make this batch files .
Thanks,
Vijay.Hi Vijay,
Create a file PurgeAllCache.sql and add the SAPurgeAllCache ODBC Function in it.
{call SAPurgeAllCache()};
And save this file in a directory (for instance OracleBI_Home\Cache).
Then from a command dos, call nqcmd with this statement :
OracleBI_Home\server\Bin\nqcmd.exe -d AnalyticsWeb -u Administrator -p Password
-s "OracleBI_Home\Cache\PurgeAllCache.sql" -o "OracleBI_Home\Cache\PurgeAllCache.log"
It will purge your all cache entries.. -
How to create services start and stop automation script for diff servers
Hi All,
i want to create a bat file for automation purpose to start and stop services
i have some services in 1st server aand some in 2nd server and some in 3rd servers.
has you all know i have to follow sequences to start and stop services can any help me in creating .bat by linking 3 servers fo starting and stoping services.
Thanks in advance
Regards
SMHi,
this is the list of start oder for services in 11.1.2.1 from the Installation and Configuration Guide
1. Databases for repositories.
2. Any corporate user directories that you plan to configure for use with Shared Services.
3. Foundation Services Managed Server application server, which includes Shared Services,
and EPM Workspace.
4. Reporting and Analysis Framework — Agent Service (if required for your environment)
5. Reporting and Analysis Framework Application Server (if required for your environment)
6. Web server
The remaining services and processes can be started in any order:
1. Performance Management Architect Services
2. Performance Management Architect application server
3. Performance Management Architect Data Synchronizer application server
4. Essbase Server
5. Administration Services application server
284 Starting and Stopping EPM System Products
6. Integration Services Server
7. Essbase Studio Server
8. Provider Services application server
9. Financial Reporting Services
10. Financial Reporting application server
11. Web Analysis application server
12. Calculation Manager application server
13. Planning application server and the Hyperion RMI Registry
14. Financial Management service
15. Financial Management Web application server
16. Strategic Finance service
17. Performance Scorecard application server
18. Performance Scorecard Alerter application server
19. Profitability and Cost Management application server
to start services on different servers you can use the sc command in your batch file
for eg
sc \\10.121.201.21 start HypS9FrameworkAgent -
Start/stop service log for workgoup server
customer would like to know who start or stop the service on workgroup server.
But we could not find such log. Is there any way to see this information?This one may help.
http://windowsitpro.com/systems-management/access-denied-auditing-users-who-might-be-starting-and-stopping-services
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights. -
Hello and thanks for any help with this.
I built a new computer for my aunt and her one major request is that she still be able to use her card maker software Creatacard (yes misspelled just like that) by American Greetings. I thought this would be no issue, I could give her a much faster machine
and get her off (the no longer supported) WindowsXP all at the same time by moving her to Windows7 and copying all her files over from the old PC to the new one.
I tested the software first on a test PC of mine and found it would not install in a 64bit environment (error message saying use 32bit during install) which I solved by using Windows7 32bit. It worked perfectly so I proceeded to build her machine thinking
that issue resolved. Problem is after the new rig was built and SP1 plus all windows updates were installed the Creatacard software would not load. I get an instant popup message saying "Creatacard Application File has stopped working" with the options
to "Check online for a solution..." and "Close the Program."
Checking online does nothing noticeable and close program doesn't help as every time you reload it fails immediately with the same message. Clicking on the "view problem details" drop menu reveals that this is an APPCRASH with the following clues
Fault Module Name ole32.dll
Fault Module Version 6.1.7601.17514
I have researched and tried everything I could find online about this crash and none of it (up to and including completely re-installing Windows, systematically loading a few Win-updates and trying the app after each batch, editing the registry multiple
times, trying alt versions of ole32.dll, and using a Linux live CD to alter windows settings) has fixed the problem. I have learned the following though:
When windows is first installed the card maker software (CMS from here on) works fine.
After windows updates itself and a few device drivers auto load (like when you first plug in a USB mouse or Flash drive) CMS breaks.
Loading windows normally after it is up to date always causes CMS to crash and give the above message.
When I perform a "clean boot" CMS works fine once again.
When I boot into safe mode CMS works fine.
Someone online suggested a service could be the actual problem and there being 140 of them I used the 50% method to quickly narrow the list and found that yes indeed windows services do appear to be related because if I don't allow the "Power"
service to run the CMS works perfectly. With a bit of testing to see what it does I found that it controlled wake/sleep settings, delay until your monitor goes dark etc and that if the Power service is disabled it remembers the last settings entered and I
thought GREAT! Finally after many days of frustration and being balked by nonsense I have a solution. My aunt will never use/miss the power settings I will set them up for her once and then kill that service and all is well for a Happy Holiday... (from my
research online some may already guess where this is headed) until I went to play a video............ and there was no sound.
A little red X had appeared next to the speaker icon down in the system tray next to the clock and hovering over it gave a popup with "The Audio Service is not running." This is where the BS gets deep. I had of course NOT disabled the sound (Windows
Audio) service and a quick check showed it and all the services it depended on were in fact on and running. The Windows trouble shooter offered to fix the issue and so I let it run but it comes back with "one or more Audio service is not running"
and attempting to restart the service on its own came back with a "Not fixed" result. Now if I go to check dependencies for the "Power" it claims that no other services depend on it and it depends on nothing but that is an outright lie.
Further digging shows me the Power service's "path to executable" as... C:\Windows\system32\svchost.exe -k DcomLauncher and many other services show they depend on DcomLauncher to run.
Long extra trouble shooting session short here is where I am at. I can have the sound working or the CMS but not both.
Uninstalling and re-installing the sound card drivers didn't help (since sound is being stopped at the windows OS level) either.
As soon as I turn on the Power service and reboot the CMS breaks. As soon as I disable the Power service and reboot the CMS works perfectly but all audio breaks. Both of these are a deal breaker as she will not leave her old slow XP machine without her CMS
and I cannot give her a new machine that has no sound. Reboots take 30 seconds on this new PC so were it mine I could just live with it as the CMS has no sound and I don't need music playing when I am designing a Christmas card. Use the sound/power on 99%
of the time and disable them and reboot whenever I make a card and then enable and reboot when I am done. This would be over her head though I fear as she is a senior and not very tech savvy. My question then is...
Is there any way to have the CMS work while still keeping the Windows Audio service (and all the other not listed but still existing dependent services) running? Or alternatively is there something else I can do to the ole32.dll to make it stop the crash/error?
To be clear I would happily accept a system without the Power service running if (like it actually says under dependencies) nothing else other than the "Power Options" in Control Panel ceased to function.Thanks Michael. Apologies for the slow reply I was away for a bit (holiday blitz at work and visiting family madness etc.etc.) back now, I set both options you requested to "never " and retried the CMS software with no change.
I do have progress of a sort though, as a test I took a separate test PC and put a clean install of Win7 on and loaded up the CMS software (it worked perfectly) and then took the version of ole32.dll off that machine and put it onto the computer I had built
for her (using Linux) and...
got a new error code. Darn I was so sure I had found a clever solution this time lol.
Anyway now when the CMS fails it gives me a similar error but the offending module is "ntdll.dll" sooo... I tried taking the "working" version of ntdll.dll from the test box and moving it over (making sure to back up the existing ones
first so I could put them back if needed) to her new PC and the PC would not boot.
It seems to want the original versions of a few Dynamic Link Libraries and if I could somehow give it those while not breaking Win7 it should theoretically work seeing as it no longer errors with ole32.dll.
ntdll.dll however seems necessary for Win7 to boot.
So what I am wondering now is:
Is there some way to have both versions of the DLL file in the system32 folder (bypassing the "cannot have two files with the exact same name in the same folder" thing) or rename the original DLL's something else and somehow make the CMS look for
the new named versions so the system has the updated DLL's it needs to boot/run and the CMS has the old ones it wants to run or is there someway to have a self contained install of the CMS, say on a USB flash drive and give it it's own E:/windows/system32/needed
dll's path to the files it needs?
Willing to try any other options or settings you may have come up with as well.
Thanks again for your reply and my apologies for not answering sooner. -
Apple mobile device service started and stopped
my iPod touch cant be synced or even recognized on my iTunes and it says i gotta *start the apple mobile device service*.
i finally found it and it tells me that *"apple mobile device service started and stopped..."*
how can i fix it?
help!!!!Hello and Welcome to Apple Discussions.
Follow the instructions in this article:
http://docs.info.apple.com/article.html?artnum=307078
mrtotes -
Hello!
I've had the student version of the Adobe Creative Suite 5.5 Design Premium software for several years now.
When I received my Windows 8 computer I installed the software with no issue.
Last week when I tried opening Photoshop I get the following error: "Adobe Photoshop CS5.1 has stopped working.A problem caused by the program to stop working correctly. Windows will close the program and notify you if a solution is available."
I deactivated and uninstalled the entire Creative Suite then reinstalled it. I am able to open the other programs, but still receive the same message for Photoshop.
What can I do?I found the issue was with the Nik Filters I was using. The filters were messing with Photoshop's initializing. I uninstalled and reinstalled the filters and now Photoshop works like a charm.
It appears this forum is dead?!
Thankfully, I was able to troubleshoot on my own and figured out the problem... -
How to start and stop the BI Services in Solaris 10
Hello All,
Can anyone guide me on how to start and stop the BI Services in Solaris 10. In windows there are options set in Start->Programs->Middleware_Home->Start/Stop BI Services.
Primarily after doing changes to the scheduler configuration, I need to restart the services to get it implemented? If yes how can I do it?
Any help will be appreciated
Thank you
Ash
Edited by: 902739 on Jan 11, 2012 12:17 PMPlease help me by showing action plan for stop sap , offline backup and then start sap.
i am little bit confuse How to start and stop SAP on cluster for offline backup
Below are the systems name with host name , please explain me in sequence
Systems name Hostname
# Hope SAP ERP Prod DB Primary gsgbbux860
# Hope SAP ERP Prod DB Standby gsgbbux861
# Hope SAP ERP Prod Cluster gsgbbux862
# Hope SAP ERP App 1 gsgbbux864
# Hope SAP ERP App 2 gsgbbux865
Thanks in advance
Zaheer -
I have recently got a new replacement iPhone 4. Since I got this I have found that my data allowance is getting used up during the night while my phone is charging on the bedside table. How an I find out what is causing this and stop it happening? Some nights the usage is 150 meg!
You can not access the backup directly.
Did you restore your replacement from this backup?
If so then you already have everything in the backup on your device.
If not, you can wipe the device and restore from this backup:
Settings > General > Reset > Erase All Content & Settings
What is it you are worried about losing that isn't already on your current device?
Maybe you are looking for
-
How can I control the order of playback on MuVu Mix (USB 2.
What determines the order of playback of music files stored on the MuVu Mix (USB 2.0)? How can I control the order? Apparently it is not name order. The music titles are prefixed by sequential numbers. But that is not the order that the files play ba
-
Count the ocurrences of a particular word in the log file of content server
Hi all, How can we achieve this. Thanks, Chely
-
Wireless regulatory domain set to GB, even tho BO have been selected
Hello, for some reason something is setting my wireless regulatory domain to GB right after wicd associates my adapter with my access point. I have selected the correct domain in /etc/conf.d/wireless-regdom (everything but my domain has been commente
-
Halo: Master Chief Collection - Pre-order Issue Confusion
Hey guys, Just went to my Best Buy in Salem, NH to pick up Halo: Master Chief Collection. I knew the Map Book & Grunt skull were given only when you preordered (which is honestly why I pre-ordered the game because I love this type of stuff). I showed
-
How much disk space necessary for a Mac OS 10.4.7 partition?
I'm planning to replace the stock 80GB HD in my G4 iMac with a 320GB seagate HD. I'll partition it into 3 parts: 1) OS and Apps 2) Music and Photo libraries 3) FCE workspace How much space should I reserve in the first partition for Mac OS X 10.4.7,