VPN Client and Vista 64-bit
We have several laptops that we need to install Vista on. We would prefer 64-bit so that we can really make use of the extra RAM these laptops have, however there is one program we require holding us back to 32-bit at the moment. Its the Cisco VPN Client. We have PIX 500 series hardware so we don't have any other VPN option right now.
All I would need to know is that Cisco does indeed plan to release a Vista 64-bit compatible of the software sometime soon (say in the next quarter).
Does anyone know if this is planned or not? Or is there some technological barrier keeping them from doing it?
February 18, 2010
Due to popular demand, the Cisco VPN Client v5.0.7 open beta is now available!
In addition to serving as a general maintenance release, the Cisco VPN Client 5.0.7 beta is compatible with Windows 7 & Windows Vista 64-bit environments.
A 64-bit specific compatible image is available for installation on these platforms.
Please have communicate feedback (both positive and problems) to [email protected]
Key Capabilities available for Beta Testing:
New Platform support – Windows 7 & Windows Vista 64-bit platform compatibility
Software Access: http://tools.cisco.com/support/downloads/go/Redirect.x?mdfid=281940730 (under 5.BETA)
Software is available for download by any customer with a Cisco.com SMARTnet™ enabled login.
Release Notes will be available next week via a link once the download image is selected.
Similar Messages
-
Is there a 64-bit version of the VPN Client for Vista coming?
Is there a 64-bit version of the VPN Client for Vista coming for the VPN 3000 series concentrators?
February 18, 2010
Due to popular demand, the Cisco VPN Client v5.0.7 open beta is now available!
In addition to serving as a general maintenance release, the Cisco VPN Client 5.0.7 beta is compatible with Windows 7 & Windows Vista 64-bit environments.
A 64-bit specific compatible image is available for installation on these platforms.
Please have communicate feedback (both positive and problems) to [email protected]
Key Capabilities available for Beta Testing:
New Platform support – Windows 7 & Windows Vista 64-bit platform compatibility
Software Access: http://tools.cisco.com/support/downloads/go/Redirect.x?mdfid=281940730 (under 5.BETA)
Software is available for download by any customer with a Cisco.com SMARTnet™ enabled login.
Release Notes will be available next week via a link once the download image is selected. -
Problem with Cisco VPN client and HP elitebook 2530p windows 7 64-bit
Hi there
I have a HP Elitebook 2530p which i upgraded to windows 7 64-bit. I installed the Cisco VPN client application (ver. 5.0.07.0290 and also 64-bit) and the HP connection manager to connect to the internet through a modem Qualcomm gobi 1000 (that is inside the laptop). When I connect to the VPN, it connects (I write the username and password) but there is no traffic inside de virtual adapter for my servers. When I connect to the internet through wire or wireless internet, I connect de VPN client and there is no problem to establish communication to my servers.
I tried everything, also change the driver and an earlier version of the HP connection manager application. I also talked to HP and they told me that there was a report with this kind of problem and it was delivered to Cisco. I don’t know where is the problem.
Could anyone help me?
Thanks to all.You can try to update Deterministic Network Enhancer to the below listed release which supports
WWAN Drivers.
http://www.citrix.com/lang/English/lp/lp_1680845.asp.
DNE now supports WWAN devices in Win7. Before downloading the latest version of DNEUpdate from the links below, be sure you have the latest
drivers for your network adapters by downloading them from the vendors websites.
For 64-bit: ftp://files.citrix.com/dneupdate64.msi
Hope that helps. -
Hi,
When I start the vpn client on Vista I everytime we get a screen with the
message : an unidentified program wants access to your computer. This
message is in an orange bar and the window itself is from user account
control.
How do I get rid of this message without turning off UAC?
regards,
JohnI was wrong - my Vista sp1 also gives me UAC warnings when I start the
VPN client.
I wish I could find a way to elevate priveleges on an
application-by-application basis to eliminate the prompt, but the best
I could do is described in the following web site:
http://www.informationweek.com/blog/.../dont_shut_off
_v.html
I'll paste in the paragraph of instructions that made the prompt go
away for me:
"Click Start and Control Panel. Switch to Classic View (if you haven't
already) and click on the Administration Tools icon. In the list that
opens click on Local Security Policy, and in the next window, Local
Policies (a tiny bit redundant, but all UIs can't be perfect -- If UAC
is running you'll get a UAC pop-up somewhere in here). In the Local
Policies list click Security Options, and scroll down to "User Account
Control: Behavior" (the full title of the policy is "User Account
Control: Behavior of the elevation prompt for administrators in Admin
Approval Mode" but the window barely opens that far). Double-click the
title and in the dialog box change its setting from "Prompt for
Consent" to "Elevate without prompting." Click OK and the urge to tear
your hair and scream at your PC will be greatly diminished in the
future."
Craig Johnson
Novell Support Connection SysOp
*** For a current patch list, tips, handy files and books on
BorderManager, go to http://www.craigjconsulting.com *** -
Ssl VPN client for Vista doesn't work
I'm trying to find a way for my client swho are upgrading the PC to Vista to connect using web VPN to a ASA 5510.
any help would be greatI don't have experience with the ssl client and vista, but I do use the new Anyconnect SSL client with vista. All you need to do is upgrade the ASA to version 8. Hope that helps.
-
Is there an Oracle VPN client for Linux (64-bit) ?
Does anyone know if there is an Oracle VPN client for Linux (64-bit) ?
Where to get it ?
How to install it ?
thanks!
GregPerhaps OpenVPN will work for you. Unfortunately you did not provide any OS information and VPN requirements.
You can find help to install and setup OpenVPN in Google. You might want to check the Fedora EPEL repository http://fedoraproject.org/wiki/EPEL to install the software using standard yum in Enterprise Linux. -
How to configure full tunnel with VPN client and router?
I know the concept of split tunnel....Is it possibe to configure vpn client and router full tunnel or instead of router ASA? I know filter options in concentrators is teher options in ISR routers or ASA?
I think it is possible. Following links may help you
http://www.cisco.com/en/US/products/hw/routers/ps274/products_configuration_example09186a0080819289.shtml -
Mavericks VPN dropouts with native VPN client and Cisco IPSec
Since update to Maverics I am experiencing VPN dropouts with native VPN client and Cisco IPSec
I am connecting via a WIFI router to a remote VPN server
The conenction is good for a while but eventually it drops out.
I had Zero issues in mountain lion and only have issues since the update to 10.9
I had similar issues in teh past with an unrelaibel wifi router but i am using a Verizon Fios router and it has worked impecably until mavericks
My thoughts are:
1 -issue with mavericks ( maybe the app sleep funciton affecting eithe VPN or WIFI daemons)
2- Issue with cisco router compaitibility or timing with Cisco IPSEC
3- Issue with WIFI itself on mavericks - some sort of WIFI software bug
Any thousuggestions?Since update to Maverics I am experiencing VPN dropouts with native VPN client and Cisco IPSec
I am connecting via a WIFI router to a remote VPN server
The conenction is good for a while but eventually it drops out.
I had Zero issues in mountain lion and only have issues since the update to 10.9
I had similar issues in teh past with an unrelaibel wifi router but i am using a Verizon Fios router and it has worked impecably until mavericks
My thoughts are:
1 -issue with mavericks ( maybe the app sleep funciton affecting eithe VPN or WIFI daemons)
2- Issue with cisco router compaitibility or timing with Cisco IPSEC
3- Issue with WIFI itself on mavericks - some sort of WIFI software bug
Any thousuggestions? -
Cisco ASA 5505, Cisco VPN Client and Novell Netware
Hi,
Our ISP have installed Cisco ASA 5505 firewall. We are trying to connect to our Novell 5.1 server using VPN client.
I installed VPN client on a laptop that is using wireless connection. I connect using wireless signal from near by hotel and I am able to connect to my firewall usinging vpn client and also able to login in using Novell client for XP.
When I use same vpn client and Novell client at home that is not using wireless connection, but DSL connection amd not able to login or find the tree.
The only difference in two machine is laptop using wireless connection and my home machine is using wired connection using DSL.If your remote end of the services in question support IPsec IKEv1 as the VPN type then, yes - the 5505 can be a client for that service. At that point it looks like a regular LAN-LAN VPN which is documented in many Cisco and 3rd party how-to documents.
-
Boot camp with Cisco VPN client and smart card
Looking at a Macbook or Macbook Air and the only reason I need to run windows is to be able to access my work network through the Cisco VPN client and my Smartcard then use remote desktop. From my understanding if I run Bootcamp it should work am I correct? Im going to an Apple store tomorrow hopefully they can help too.
Thanksmrbacklash wrote:
Ok with that being said will the MBA 11.6 1.4ghz have the guts to make it run mostly internet based programs over the VPN connection?
I think if you are running apps over the Internet the bottleneck will be the Internet and your VPN bandwidth. Your computer can certainly execute faster than Internet communications.
Besides, Internet or remote applications run on the remote server. All your local computer does is local processing of the data if necessary.
Message was edited by: BobTheFisherman -
RV220W, VPN client, and Full Tunnel vs Split Tunnel capabilities
For an RV220W, which VPN client mode (of the three possibilities) supports which Tunnel mode?
This is mostly a question, and partly "in use" observations.
Background: I have been able to get all three different VPN clients to work with an RV220W, but only one of the three works in "Full Tunnel" mode (SSL VPN). And since I know one of the three -- the Cisco QuickVPN client -- will never with in that mode, do we know if an RV220W will with an IPSec client in Full Tunnel Mode?
If anyone answers yes, the next question will be vpn client and how did you configure it, client and RV220W, to make full tunnel work.
Summary of VPN modes I've gotten to work with an RV220W:
Client
Split Tunnel Works?
Full Tunnel Works?
OS?
Notes
SSL VPN
Yes
Yes
Win7/64
IE10 or IE11
QuickVPN
Yes
No
Win7/64
IPSec VPN
Yes
No
Win7/64
Shrew Soft VPN ClientI have to mark this as not a correct answer.
Reason: 0.0.0.0 will not go into either of the fields listed above, message is "Invalid IP address Please enter a value between 1 - 223 at xxx.0.0.0.".
To Michal Bruncko who posted this:
1.) 0.0.0.0 will not work in my router nor in the RV220W online emulator here, (general emulator page here), am I missing something obvious?
2.) Have you used these actual settings on your router, or did you answer in a theoretical, "this should work" way? -
Fingerprint Software 5.8 for Windows XP and Vista (32-bit)
Fingerprint Software 5.8 for Windows XP and Vista (32-bit) points to:.
Version: 5.6.2.3650 Release Date: 2007/09/27 which is OLD!!!!
we ar stiil waiting for new driver? package? .. have lot's of customer which acan not help! to fix their machines?
If you have a woman with smal hands/wingers .. there is no way to make it WORK!!!
When will we see new turbo memory drivers?? Have more than 50 customer/notebooks wit turbo memory diabeld. as it not usable, but they have paid for a product!!!!
Come ON !!
Message Edited by TeMpL on 07-09-2008 07:29 PMHi there!
Please see this thread for the download links for the Fingerprint Software 5.8 ....
This issue was already raised in the ThinkVantage subforum here at Lenovo Forums and it is resolved.
Regarding the Turbo Memory, please keep in mind that the hardware only works with Vista. Windows XP does not support turbo memory thus the piece of hardware is rendered useless. With regards to Turbo Memory usage in Vista, the latest drivers do fully support the card in Vista and since there are no technological changes, there is no need for additional or new drivers.
Hope this helps!
Steve
Message Edited by icantux on 07-09-2008 02:28 PM -
I've just installed a VPN Client Software for x86 64-bit version of Vista and Windows 7 (vpnclient-winx64-msi-5.0.07.0440-k9.exe) to Windows 8. It's working without problem except that it seems to add an entry "c:\Windows\Installer\{5FDC06BF-3D3D-4367-8FFB-4FAFCB61972D}\Icon09DB8A851.exe" onto startup task. I suspect the installer program (InstallShield) is not working properly. I'd like to know if anyone has same issue or my computer got infected in malware.
Hi I have installed and config to my client a ASA 5515 and everything is fine but. When I config L2TP/IPSEC VPN for the remote work bang I have a problem. When I config L2TP/IPSEC VPN to Windows 7 with native client on Windows everything is fine, but in Windows 8.1 is bad on 1 hour after VPN connection Windows 8.1 tries to renegotiate the connection and something happens and the connection is disconnected.
LOG:
5
Feb 14 2014
14:53:07
713049
Group = DefaultRAGroup, IP = XXX.XXX.XXX.XXX, Security negotiation complete for User () Responder, Inbound SPI = 0x869df107, Outbound SPI = 0xfb02e574
4
Feb 14 2014
16:41:08
113019
Group = DefaultRAGroup, Username = s.choraliev, IP = XXX.XXX.XXX.XXX, Session disconnected. Session Type: L2TPOverIPsecOverNatT, Duration: 1h:48m:01s, Bytes xmt: 29765217, Bytes rcv: 9633270, Reason: L2TP initiated
5
Feb 14 2014
16:41:09
713119
Group = DefaultRAGroup, IP = XXX.XXX.XXX.XXX, PHASE 1 COMPLETED
6
Feb 14 2014
16:41:09
602303
IPSEC: An outbound remote access SA (SPI= 0x805CA50C) between XXX.XXX.XXX.XXX and XXX.XXX.XXX.XXX (user= DefaultRAGroup) has been created.
5
Feb 14 2014
16:41:09
713049
Group = DefaultRAGroup, IP = XXX.XXX.XXX.XXX, Security negotiation complete for User () Responder, Inbound SPI = 0x9a7f5ac6, Outbound SPI = 0x805ca50c
5
Feb 14 2014
16:41:09
713120
Group = DefaultRAGroup, IP = XXX.XXX.XXX.XXX, PHASE 2 COMPLETED (msgid=00000001)
And the VPN session is stack. -
Cisco AnyConnect VPN client and 256 AES encryption in IE8
Hey,
We have a site that we are trying to connect to with the AnyConnect VPN client version 2.5.3055 on Windows XP SP3. As soon as we enter the site info and hit select, it says a connection was unable to be established.
I believe this has to do with the encryption, its set up with 256 bit AES. We are only able to install IE8, which on XP only supports up to 128 bit encryption, so in IE8 the page will not load. To fix that issue we installed firefox which supports 256 bit encryption. We can get to the page there, but when we go to connect to the same site VIA the VPN client it still will not connect. It will work fine on a windows 7 box with IE9 installed from the same network.
My question mainly pertains to how the AnyConnect client connects on the back end. Does it use Internet explorer's SSL layer by default? Or does it have its own? If it connects through internet explorer, is there a way to change it to firefox so it will actually be able to open up a connection?
Thank you for your answers in advance,
JohnHey Jeff,
Thanks for answering that question. Hmm, so it doesnt go through the browsers SSL layer. We have systems on the same network (same proxy, firewall, vlan, etc). All the systems with windows XP SP3 and IE8/IE7 can not connect to the VPN (they arent even able to start the connection and ask for proxy/logon info.), all the systems with windows 7 and IE9 can. Same setups on each one as far as the security policies go as well. I thought it may have to do with the 256 bit encryption that they are using.
If thats not the case, what else could be causing the problem? weve tested it on about 5 XP machines and 5 Win 7 machines, same results on each. Connects on Win 7, does not connect on Win XP.
Thanks,
John -
Hello,
We have a Cisco ASA 5520 with the VPN PLus License and 8.04 IOS installed, we want to set up vpn access to our users. We can use the cisco VPN client which works on WIndows Platform, but we also have MAC OS 10.7 which works only with Cisco Anyconnect.
I am a little bit lost with all the client and the license, actually we can't setup more than 2 vpn session with an Anyconnect client installed on MAC or Windows. The authentication is by Certificate, the first two connect fine, but the third one don't connect and prompt for a username / password.
I joined a SH VER of my ASA, if anyome can tell me what is wrong on the license or perhaps it's a configuration problem?
Thanks a lot for the answer.
Mathieu.
fw-eps-02# sh ver
Cisco Adaptive Security Appliance Software Version 8.0(4)
Device Manager Version 6.4(1)
Compiled on Thu 07-Aug-08 20:53 by builders
System image file is "disk0:/asa804-k8.bin"
Config file at boot was "startup-config"
fw-eps-02 up 1 hour 36 mins
Hardware: ASA5520, 2048 MB RAM, CPU Pentium 4 Celeron 2000 MHz
Internal ATA Compact Flash, 256MB
BIOS Flash Firmware Hub @ 0xffe00000, 1024KB
Encryption hardware device : Cisco ASA-55x0 on-board accelerator (revision 0x0)
Boot microcode : CN1000-MC-BOOT-2.00
SSL/IKE microcode: CNLite-MC-SSLm-PLUS-2.03
IPSec microcode : CNlite-MC-IPSECm-MAIN-2.05
0: Ext: GigabitEthernet0/0 : address is c84c.75da.9a58, irq 9
1: Ext: GigabitEthernet0/1 : address is c84c.75da.9a59, irq 9
2: Ext: GigabitEthernet0/2 : address is c84c.75da.9a5a, irq 9
3: Ext: GigabitEthernet0/3 : address is c84c.75da.9a5b, irq 9
4: Ext: Management0/0 : address is c84c.75da.9a5c, irq 11
5: Int: Not used : irq 11
6: Int: Not used : irq 5
Licensed features for this platform:
Maximum Physical Interfaces : Unlimited
Maximum VLANs : 150
Inside Hosts : Unlimited
Failover : Active/Active
VPN-DES : Enabled
VPN-3DES-AES : Enabled
Security Contexts : 2
GTP/GPRS : Disabled
VPN Peers : 750
WebVPN Peers : 2
AnyConnect for Mobile : Disabled
AnyConnect for Linksys phone : Disabled
Advanced Endpoint Assessment : Disabled
UC Proxy Sessions : 2
This platform has an ASA 5520 VPN Plus license.
Serial Number: JMX1433L0Y3
Running Activation Key: 0x3a17c153 0x8c141630 0xe0f3b5d4 0x86044ccc 0x47193392
Configuration register is 0x40 (will be 0x1 at next reload)
Configuration last modified by mgeffroy at 15:33:11.409 CEST Mon Jan 23 2012
fw-eps-02#why don't you use built-in client in mac osx? it supports certificate authentication also.
another solution would be to buy additional ssl vpn licences: there is a limit of two ssl vpn sessions by default.
Sent from Cisco Technical Support iPad App
Maybe you are looking for
-
How to publish a File Content Item via EDK?
I'm trying to publish a "File Content Item" via the EDK. CS EXPLORER Recall, that a "File Content Item" is different than a (regular) "Content Item" in that (via CS Explorer) it's a content item with no user-defined data entry template (when you righ
-
What's the mA Charging Requirement for 2nd Generation? What is the maximum?
It appears that the minimum charging requirement for the 2nd generation is 500ma and the optimum is 1000ma (1A). Can anyone confirm that for me? I can't find any specifications anywhere. Also, will using a high power USB charger cause any harm to the
-
Hello, I have an existent application that use database view (very complex) to retrieve and display values from some tables. I have to reproduce the same thing with EJB3 in a web application. What is for you the best way to design entities beans ?
-
Can anyone tell me how to get the original YouTube application back on my iPad?
-
How to pack and send the iMac 21.5 2013?
Hi, the shipping company is asking me about the width (inch), height, length and weight (lbs) of the original box of the iMac 21.5 ME087 late 2013, I want to buy in US. Someone can help me?