Vpn client causing blue screen on windows xp

Hi all, we have rolled out cisco vpn client to most of our laptops, we have now lots of users experiencing the blue screen of death when remotley connected.
Does anyone know why this is?
Cheers
Carl

If you are using the VPN client 3.6.1 it might cause a Windows BlueScreen critical error. This problem results from incorrect processing by the VPN Client of a return DDNS packet from a DNS server that does not implement DDNS.
If this problem is encountered, cvpndrv.sys (Cisco VPN Driver) would cause the blue screen.
Release 3.6.3 resolves the issues

Similar Messages

Cisco VPN Client causes blue screen crash on WindowsXP Pro (Satellite M30)

Hi there,
I've got a Satellite Pro M30 running Windows XP Professional.
After starting a vpn Tunnel via a Cisco VPN Client (Version 4.6 and 4.7) the system crashes with a blue screen.
I can see that the key exchange is successful, but immediatly after the vpn connection gets established Windows XP crashes with a blue screen.
Has anyone an idea, how to solve this problem?
Maybe by device driver update? And if so, which driver should be updated?
Kind regards,
Thorsten

Hi R2D2 (and anyone else)!
1st of all (concerning your link) - I'm not using the wireless adapter.
I am connectet via 100Mbit via network-cable to my hub (all RJ45 TP Cat.5)
I found several other Notebook users by google'ing who have the same problem different vpn-clients but most of them with a centrino processor inside the notebook.
Almost all of them solved the problem by installing new drivers. But I can't use driver-patches from other Notebook to fix my Toshiba Drivers.
What could help is information about which driver is responsible for the crash by vpn clients on centrino notebooks. Maybe there is an Intel driver for it, but when I do not know which one causes the problem it's like seeking a needle in a haystack... :(
Disabling ALL other network devices (wireless, 1394-network adapter, modem, etc.) did not solve the problem.
I used the Cisco VPN clients several times on my old Compaq Notebook without any problems, but here it just doesn't work.
An idea which driver should be updated is kindly welcome!
Thank you, Thorsten

Cisco vpn client causing blue screen on xp

Hi all, We have just done a rollout of cisco vpn client 4.6 on our laptops, since this alot of them seem to be blue screening aka blue screen on death, they are all running xp with service pack 2, does anyone know of any issues with this and how to solve it?
cheers
Carl

If you are using the VPN client 3.6.1 it might cause a Windows BlueScreen critical error. This problem results from incorrect processing by the VPN Client of a return DDNS packet from a DNS server that does not implement DDNS.
If this problem is encountered, cvpndrv.sys (Cisco VPN Driver) would cause the blue screen.
Release 3.6.3 resolves the issues

Skype causing Blue Screen on Windows 7

I just recently acquired a new computer and after installing Skype the second I log in it causes a blue screen of my computer. I tried a few times and the same happened everytime. Anyone else sharing this problem?

Blue screen on Windows 7? Wow. I've never managed to get BSOD on any of my Win7 PCs.
But what may cause this - no idea, really.
Добавляйте баллы, если моё сообщение вам помогло. Спасибо!
Возврат денег | Система обновления подписок | Заблокировали/взломали аккаунт? | Пропали контакты? | Не зайти в Skype/не добавляются контакты? | Не удалось загрузить базу данных?
Подписки | Цены

BB Desktop Software causes Blue Screen at Windows XP

Hi,
I'm using BB Desktop Software 6.1.0.35 at Windows XP over Lenovo X201 laptop. When I try to sync the adressbook or calendar between my BB(Storm II 9520) and my laptop, it often causes blue screen at my laptop.
I tried to uninstall and reinstall the desktop software but the blue screen occures again. But, the same version of Desktop Software at Windows VISTA over HP pavillion Desktop doesn't cause similar problem.
Please kindly let me know how can I fix it or please check if there are any defects at your Desktop Software.
If you need, I can send the screenshot to you via email.
Best Regards,

Just unisntall this version and install the desktop version 5.1. That will not give you blue screen infact it is fully compatible with xp
Need any help please let me know

VPN Client 4 blue screens Acer TravelMate Running W2K

I have tried two different versions of the Cisco VPN Client (both of them Version 4 flavors), and the Acer TravelMate will Blue Screen after installation. If I boot to Safe Mode and uninstall the Client, the machine works fine. The machine is running Windows 2000.
Has anyone else had this problem? If so, what did you to to solve it? Any help is appreciated. Thanks! Mike

There are known issues with blue screen symptoms with VPN client. There are several bugs on 4.0 which may cause a blue screen: CSCdt31839, CSCdx57930, CSCal01761, CSCdx11597. These are only a few known issues regarding a blue screen on a windows machine. Check if there are others with Acer too using the Bug toolkit available on cisco.com/tac.

Photoshop CC and 2014 spot healing brush tool causing blue screen on windows 8.1

Hi,
The problem is when I'm using spot healing brush tool soon as apply it it causing fatal error on my windows. I have all suite up to date.
please advice.

First thing to do is check you have all the latest device drivers for all your devices and all windows 8 updates. Printer drivers, Display Drivers, Network drivers etc. It is not possible for an Application program like Photoshop.exe to cause a Blue Screen. However Applications use devices and device drivers are able to do things application programs can not do.

Apple TV Causes Blue Screen in Windows Vista when syncing purhcases

strange problem. I have a windows vista ultimate 32bit pc running iTunes 8.0.2 my library is about 240gb i have 54000 songs and about 200 videos/tv shows etc. I have an Apple TV and an iTouch remote.
Everything worked fine until i bought all 5 seasons of a show from Apple TV. ATV downloaded all of the shows then began the process of syncing them back to my PC. About 10 min into the Sync - my computer Blue Screens. I've turned off all firewalls (locally) and disabled or removed AV software temporarily.
HELP! this is driving me insane and about the only thing i've been able to do is isolate the problem to the ATV syncing.

Guys, I got the answer, and so that it's here for future reference:
It was not the Apple TV, though the Apple TV is what exposed the problem. The problem is with CA Internet Security 2010, which, for some reason, installs and creates corruptions in some network drivers. The solution can be found here:
http://www.geekstogo.com/forum/blue-screen-random-shutdown-tcpip-sys-problem-hel p-t237853.html
As for drivers, again, all drivers were up to date, as was windows
Thank you all for the brainstorming, hope the next person is helped by this.

Skype video crashes my GPU driver and causes blue screen.

Hello,
Installed a new copy of windows and got the latest version of skype for my PC (on wich skype worked just fine, video calls, voice calls, but it was an older version. No hardware changes)
With the new skype, I , for the least, get driver crashes, and for the most, a blue screen, when I just go to options to set up my webcam.As soon as I see the square "loading" my webcam in the options, everything freezes and I get a driver crash or a blue screen.
Current specs:
i5 4440, stock clocks
2x8gb 1333 ddr3 1.5v ram, stock
R7 260x, stock
500w PSU, not the best quality, But I also tried a 1000w platinum PSU, and same resaults.
last error code I remeber from the blue screen was: 0x00000116
I know it is related to the GPU, but it doesn't have power deficiency, since I manage to run heavy games just fine.By the way, my webcam works just fine on different web sites, so it's not the webcam.
What I tried:
-Degrading to the oldest supported version by skype
-Degrading video drivers
-Using different webcams
-Installed all windows 7 64 bit updates
edit:
skype 6.14 works, but newer versions crash my GPU drivers and cause blue screen

I would suggest uninstalling Droidcam as it could be the source of some delays assisting in causing the problem. TDR problems occur when your videocard is unable to respond in 2 seconds for a variety of reasons (heat, tweaks), forcefully resetting the card. Some people increase this delay in their registry from 2 to up to 10 seconds to give the card time to catch up so that a reset doesn't occur. You can try this MS fix it which increases this delay. https://support.microsoft.com/en-us/kb/2665946

Blue screen in windows 7

I have been getting the blue screen after windows has been running for a while. Sometimes it happens when I am trying to install something. I have uploaded minidump files to the sky drive but I can't seem to read them, I tried copying and pasting them to
the desktop and opening them as notepad files but all I get is gibberish, at least it is to me. I need to know how to make these accessible to the pros so I can repair this problem. I have the Technical information from the blue screen here:
A clock interrupt was not received on a secondary processor within the allocated time interval.
*** stop 0x000000101 (0x0000000000000031, 0x0000000000000000, 0xFFFFF88002FD3180, 0x0000000000000003)
Don't know if this helps but there it is.
I am running Windows 7 P 64 bit desk top
Gigabyte MB GA-MA78Gm-S2H Rev 1.0
4GB Crucial Ballistix PC6400 800 Mhz 2Volt BL2CP25664A80A
AMD PHENOM 9750 2.4Ghz QUAD CORE
CPU temp was 32-34 degrees C last time I checked.
Disk error check was inconclusive ( I walked away and when I returned windows had loaded ) I assume this means that no errors were found.
RAM scanned and no errors were found.
https://skydrive.live.com/?mkt=en-US#cid=74B3C1D7DE3540EC&id=74B3C1D7DE3540EC!130

Alan
These worked but were inconclusive 0oease run driver verifier to pin down the misbehaving driver.
These crashes were related to memory management (probably caused by a driver).
Please run these tests to verify your memory and find which driver is causing the problem. Since this appears to be a driver I would start with driver verifier.
If you are overclocking (pushing the components beyond their design) you should revert to default at least until the crashing is solved. If you don't
know what it is you probably are not overclocking.
1-Memtest. (You can read more about running memtest here)
2-Driver verifier (for complete directions see our wiki here)
Co-Authored by JMH3143
Wanikiya and Dyami--Team Zigzag

Schannel errors - appears to be causing blue screens

Hi guys
Every once in a while (a few times a month) our RDS server (server 200r82 hyper-v VM) decides to blue screen and restart.
Each and every time it crashes, we notice hundreds and hundreds of schannel errors appearing just before the crash (event ID 36888)
Well, it did it again this afternoon, and over the last 12 hours we noticed 1008 instances of this error, with 60 odd messages appearing within 0.2 seconds of each other, and 2 minutes before the crash.
I also noticed that just before the crash, there were a handful of services which hung seconds before the logged unexpected shutdown event. These services are as follows.
- UmRDPService
- WPDBusEnum
- UxSMS
- Audio Endpoint Builder
After the crash, it doesnt log any Schannel errors. although, saying this now and just checking again, it looks like its logged 127 instances of the same schannel error, starting from after around 2 hours of bringing the server back online.
Do these Schannel errors cause blue screens/crashes? Or is it something else I should be looking at... I'm at a loss, as there's not a lot more in the way of logs that seem to be telling me what's going on..

Hi EsDood,
Would you please let me know complete message of Event ID
36888? For Event ID 36888, it generally occur if a user tries to access a web site using HTTP but specifies an SSL port in the URL. Please check the Schannel tracing log if find relevant clues.
How to enable Schannel event logging in IIS
Please also refer to following thread and check if can help you.
Schannel
error, Event ID 36888? - IS there a way to Identify what causes Schannel to log error?
In addition, I noticed that a BSOD issue occurred on the Windows Server 2008 R2. Troubleshoot this kind of
kernel crash issue, we need to analyze the crash dump file to narrow down the root cause of the issue. Did you get any dump files? If get, please refer to
KB315263 and check if can help you.
If this issues is a state of emergency for you. Please contact Microsoft Customer Service and Support (CSS) via telephone so that a dedicated Support Professional can assist with your request.
To obtain the phone numbers for specific technology request, please refer to the web site listed below:
http://support.microsoft.com/default.aspx?scid=fh;EN-US;OfferProPhone#faq607
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu

Blue screen error "windows has recovered from a unexpected shutdown"

Hi guys
I am using laptop & everyday it will unexpectedly shutdown and shows Blue screen error "windows has recovered from a unexpected shutdown"...Pls help me to resolve this issue.
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.48
Locale ID: 1033
Additional information about the problem:
BCCode: d1
BCP1: 00000030
BCP2: 00000002
BCP3: 00000000
BCP4: 8F2DA8A5
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1
Files that help describe the problem:
C:\Windows\Minidump\062614-23836-01.dmp
C:\Users\Venkateshwara swamy\AppData\Local\Temp\WER-74552-0.sysdata.xml
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

It could be some driver compatibility issues.
http://msdn.microsoft.com/en-us/library/windows/hardware/ff560244(v=vs.85).aspx
http://blogs.technet.com/b/askcore/archive/2008/11/01/how-to-debug-kernel-mode-blue-screen-crashes-for-beginners.aspx
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

MacBook Pro won't boot (question mark folder) after blue screen on windows bootcamp

Hi,
So, I was on windows, using bootcamp, and I was creating partitions on a pen drive with it, and then it asks me that it needs to restart to apply changes.
But then, while restarting, a blue screen occurred (**** windows).... And I forced the shutdown pressing the power key.
Then, I simply turned the MacBook on, trying to boot on my snow leopard and I got a flashing folder with a question mark on it.
Now I can't access any partitions on it, if I press option key on startup I get a blank window!
I tried to reset PRAM, repair the MacOs partition using the snow leopard DVD (it shows up fine, along with windows partition and EFI partition), and I still don't get my startup disk showing up...
How can I fix this? I can't loose my files and I need to work with it :/

I just fixed it!
For future reference, what I did was:
- Booting from OSX DVD, go to disk utility
- Erase windows partition (yap, I lost it...)
- Do a "repair disk" on every partition of my hard drive
- Restart
And it just worked ;)
Thankfully I had no important files on my windows partition, now I will just reinstall it.

My laptop become blue screen after windows logo, after i update the graphic ati and intel driver

I have constant blue screen after windows logo and i have updated all drivers. i was upset the blue screen didn't go away and i did the factory reset. For my suprise, it didn't solve the problem and then i repair it at the comp shop. it was installed with windows 7 home premium 64 (pavilion g4 1006tx) bit as the pre installed windows and activated with the key back on sticker. I updated all drivers and i noticed every time i update the ati and intel driver it will go blue screen after windows logo. after i uninstall it at in safe mode it can load normally. My question is there any solution for my graphic card or is it already damaged? or any other hardware problem? please because i have to use high graphic as i use photoshop

hii
make sure you download and update correct driver version of graphic
and know spec
more:
http://support.hp.com/us-en/drivers/selfservice/HP-Pavilion-g4-Notebook-PC-series/5046252/model/5068...
try to instal "AMD High-Definition Graphics Driver" only
and uninstal "Intel High-Definition (HD) Graphics Driver"
Wisnu Suryandi

E2500 Wireless Causing Blue Screen of Death (BSOD) with My Company's VPN (AT&T Net Client)

Since recently replacing my home router with a Linksys E2500, I have been getting Blue Screen of Death (BSOD) with my Company's VPN (AT&T). It only happens when I am running wireless with my E2500. If I am hooked up to my E2500 through a ethernet cable it doesn't happen. I have updated the BIOS on my Lenovo Thinkpad T410 and ensured all of my drivers are up to date. I am 99.9% sure the problem is caused by my Linksys E2500 because I have used my laptop on other wireless routes at work and school and never get this problem. I am also ensured that my E2500 has the current firmware installed and upgraded my Company's VPN to the most current level to no avail.
I am getting DRIVER_IRQL_NOT_LESS_OR_EQUAL Blue Screen of Death in agnfilt.sys. Any assistance would be greatly appreciated. Thanks in advance.
Solved!
Go to Solution.

The symptoms you describe could be symptomatic of a variety of things to include hardware/software issues, overheating caused by a failed processor fan, bad memory (RAM), failing or underpowered power supply, CPU overheating, motherboard, video card, faulty or unsigned device drivers, CMOS battery going bad, BIOS and firmware problems, dirty hardware components, programs hanging or unresponsive in the background, and even malware. If the computer is overheating, it usually begins to shutdown/restart on a more regular basis.
If the machine is only crashing at home after establishing a connection but not at work when establishing a connection, then its probably an issue with your network configuration or something (i.e. wireless adapter) causing a conflict and not a malware issue.
The DRIVER_IRQL_NOT_LESS_OR_EQUAL error is usually due to a bad driver or faulty/incompatible hardware or software. This error condition means that a kernel-mode process or driver tried to access a memory location to which it did not have permission, or at a kernel Interrupt ReQuest Level (IRQL) that was too high.

Vpn client causing blue screen on windows xp

Similar Messages

Maybe you are looking for