VPN compatibility

I have a copy of Windows XP that I want to install on my iMac using Boot Camp. Once I get it installed, I want to be able to set up my Mac so that I can VPN to work computer, which runs Windows XP as well. If I boot up my Mac to run Windows, would I be able to install all necessary components for VPN just like I was using a PC?
Thanks.

Hi Christine,
as Lyssa already said, after the Windows installation and the BootCamp Driver installation, your Mac-Windows is like any other Windows-PC.
Ask the IT-guys at work how to configure the built-in VPN-client in XP.
If you need a VNC-client I use RealVNC in Windows XP to connect.
You even can do a VPN/VNC-connection with Mac OSX to a Windows-PC. For that I use the built-in VPN of OSX and JollyFastVNC.
Regards
Stefan

Similar Messages

Nortel VPN Compatibility issue

Hi All,
I'm a newbie in using BPM studio 10.3, I just want to ask something about BPM Studio 10.3. The scenario is every time I run the project on my laptop, the project wont run on my browser. I think the reason is that I'm using Nortel VPN. My question is, do you know how would I set up my studio or my laptop so that the project would run on my browser while using Nortel VPN?

IPSec VPN can be with no problem set up between any cisco routers (and not nesesserely cisco), so there are should be no issues in your case.
If you say that tunnel is established successfully, then problem most probably related to routing issues between sites or incorrect crypto-acl configured. Check if hosts on both sites have correct routing information on how to get to subnets on the other site.
To make more accurate assumptions it would help if you provide config on both sites and describe your topology.

MPLS IP-VPN compatibility

Hi, we've lots of members running on 2 Cisco 2611 with HA configured (HSRP, ISDN backup, etc). There is 2 scenarios here as follow:
i. 2 units of 2611 routers with each 2611 have a dedicated LL, one connected to HQ, the other connected to DR.
ii. 2 units of 2611 routers with only one have a dedicated LL, the other provide ISDN DDR when the LL on the other failed.
iii. 1 unit of 2611 routers with trunking to a 2950 switch, have a dedicated LL and ISDN DDR.
For the first scenario, when the members having 2 dedicated LL, normally it is from different telco providers. Now there's one single telco offering us the chance to upgrade to MPLS IP-VPN for an interesting rate. What I'm wondering is, can it work that way?
I have my 6509s with Sup720 at both HQ and DR, I have a good vendor all the while, if part of the members start to accept the MPLS-VPN, is there any integration problem? The HA configured will still work?
The thing that worried me most is the core layer part, since the member get the router through a router distribution from the core router in EIGRP, and the ISDN DDR will redistribute the static when the ISDN is active. How MPLS fit into my network?

Hello,
In principle everything can work. The dessign in question has one leased line (or ISDN) to the HQ and another path through a MPLS VPN. The issue you will have to deal with is to carefully design your dynamic routing. In case you have EIGRP, then an internal route will always be prefered over an external route. It is most likely to get external routes through the MPLS VPN - depending on implementation details.
Thus you might have the problem of proper primary/backup path selection and also with routing loops. The underlying reason for both is the redistribution in MP-BGP at the MPLS PE router.
You need to get more details on the implementation in the SP network to avoid any pitfalls. EIGRP supports backdoors in an MPLS VPN environment, but the question is, whether your telco does as well.
So it might work, but careful routing design is a must and involves you and the telco. HA is still possible, ISDN backup is possible as well. Depending on your specific implementation details you might need some route tagging and redistribution filters implemented by yourself or the telco to avoid the aforementioned problems.
Hope this helps! Please rate all posts.
Regards, Martin

Issue with VPN compatibility between 2811 and 2911

hello
I would like to ask anyone have had any issues with setting up a VPN tunnel between 2811 and 2911?
The IPSec VPN is established but for some reason I cannot ping the LAN side to the other LAN side of the other end of the VPN Router?
Any experience would be much appreciated
Thanks

IPSec VPN can be with no problem set up between any cisco routers (and not nesesserely cisco), so there are should be no issues in your case.
If you say that tunnel is established successfully, then problem most probably related to routing issues between sites or incorrect crypto-acl configured. Check if hosts on both sites have correct routing information on how to get to subnets on the other site.
To make more accurate assumptions it would help if you provide config on both sites and describe your topology.

Cisco VPN compatibility problem

I am running the Cisco VPN client (version 2.5.1025) on a late 2010 iMac and on a late 2010 Macbook Air (both running OS 10.6.7). On the iMac, there is a problem after closing the VPN connection and quitting the client: most things are normal, but I no longer have internet access on the iMac. While I seem to have a local ip address and name server, according to system setting, the internet hangs. This is true both for wired and for wireless internet. The only solution seems to be to restart the iMac, and then everything is normal.
Exactly the same version of the Cisco client works fine on the Macbook Air. It quits normally. I have no problem accessing the internet after quitting.
Can you give me any help?

Where did you find this Cisco VPN Client? Did you download it from iTunes as an application?
Or was it the VPN Client that comes as part of the 1.1.4 jailbreak?

Personal VPN compatability and recommendation

Hi, I would like to use a personal VPN service (similar to WiTopia http://www.witopia.net/personalmore.html).
If I buy a personal VPN service, can I put the settings in Airport Extreme and have all my computers secured through VPN?
Do you have any recommendations for VPN services ?
Thanks,

After the Genius Bar guys at our Hamburg Apple Store had given up on this issue, I finally solved the problem - my VPN is up and running!
After re-installing both OS X Lion and Lion Server several times I realized that certain settings (apparently also for the VPN server) are kept in the invisble recovery partition that Lion installed on my Mac Mini (e.g., 'com.apple.RemoteAccessServers.plist'). They even survived a reformatting of the hard drive. Something must have gone wrong the first time I tried to set up the VPN server and the "sudo serveradmin settings vpn" command revealed that the settings survived every re-installation.
Therefore, I physically removed the hard drive and formatted it using a different Mac running Snow Leopard.
It is important not only to erase the disk but also to partition it. This might even work under Lion without having to remove the drive...
After another re-installation of OS X Lion on the clean drive over the Internet from Apple's server (pressing the command-R keys while rebooting) I did a system update and subsequently installed the Server app.
After that I was able to start the VPN server from the Server app.
Inside my local network it was then possible to connect to the VPN server from an iPad 2 (iOS 4.3.5) and from an old Powerbook G4 (Leopard), but not from a MacBook Pro with Snow Leopard.
However, all clients were able to make an external connection through my Deutsche Telekom Router (SpeedPort 722V) with forwarding of ports 1701 (UDP), 500 (UDP) and 4500 (UDP) and enabled GRE and ESP protocols.
For the sake of security I have disabled (closed) all arbitrary ports of the server's own firewall while it's local network ports (192.168.x.y) are all open to enable any internal connections.
It is a serious restriction, however, that the Lion Server only offers the L2TP VPN protocol. Maybe the commercial iVPN solution is an acceptable workaround: http://macserve.org.uk/.
Regards, Björn

Is Cisco VPN posible for Windows Phone 8.1

Hello,
Microsoft released Windows Phone 8.1 on April and it supports VPN connections.
So I would like to ask:
Is Cisco going to release Anyconnect Secure Mobility Client for Windows Phone 8.1?
Maybe someone managed to make clientless connection with ASA 9.1( for example IKEv2 or SSL-VPN) ?
Or should I abandon idea of connecting WP 8.1 with ASA?
Thanks.

Hi aurimas88 ,
Looks like AnyConnect Secure Mobility Client 2.5 is supported for windows phone , however W 8.1 mobile has not been tested by Cisco , We cannot guarantee compatibility.
AnyConnect Secure Mobility Client 3.0 Windows Mobile Devices Not Supported
AnyConnect version 3.0 and later do not support Microsoft Windows Mobile or Windows Phone. However, you can continue to use the ASA to deploy the AnyConnect 2.5 or earlier client for Windows Mobile even after loading the AnyConnect 3.0 package files to the ASA for web deployment.
AnyConnect Secure Mobility Client 2.5 Windows Mobile Devices Supported
We designed AnyConnect 2.5 for compatibility with Windows Mobile 6.5, 6.1, 6.0 and 5.0 Professional and Classic for touch-screens only. Users have reported success with most touch-screens running these versions of Windows Mobile. However, to ensure interoperability, we guarantee compatibility only with the devices we test, as follows:
HTC Imagio running Windows Mobile 6.5
HTC Tilt 2 running Windows Mobile 6.5
HTC Touch running Windows Mobile 6.0
HTC TyTN running Windows Mobile 5.0
Samsung Epix running Windows Mobile 6.1
Samsung Omnia Pro 4 running Windows Mobile 6.5
Samsung Omnia running Windows Mobile 6.1
Samsung Saga running Windows Mobile 6.1
Source:
http://www.cisco.com/c/en/us/td/docs/security/asa/compatibility/asa-vpn-compatibility.html#pgfId-181897
Hope this helps

Nokia mobile VPN Client - split tunneling

Hi
I'm trying to get Nokia mobile CPN Client working with split tunneling on a Cisco firewall.
I have full access to all on my internal lan's when I make the VPN tunnel, so tunnel is up and working.
But I do not have access to anything in the internet, it tries to route internet requests through the VPN. I have set split tunneling on the Cisco firewall and it is working as intended on all other devices.
Any ideas of what I have missed?
My policy is based on the bundled Cisco_ASA_pskxauth.pol from the Nokia mobile VPN Client Policy Tool.
tsfts

Hi vgta2k:
Nokia 5530 XpressMusic is S60 5th edition phone.
http://www.forum.nokia.com/Devices/Device_specifications/5530_XpressMusic/
It runs different version of Nokia Mobile VPN client than Symbian^3. You can find the correct version at the download page:
http://europe.nokia.com/support/download-software/nokia-mobile-vpn/compatibility-and-download
Just use the device selector and pick your phone.
You can also find Nokia Mobile VPN Client nowadays at Ovi Store.
Thanks,
Ismo

How to download anyconnect vpn client 64 bit win 7

Good day all,
please i wanted to download anyconnect vpn client 64 bit win 7 from software.cisco.com and i was not able to do that after login in. please can someone help me on how or the steps i can take to get the download.
secondly can i be able to install it using ASDM after the download because i do not have a tftp server for now. thanks

Hi csco12434455 ,
Try to go to the following link, the name of the file is: Web deployment package for Windows platforms.
This file does support W7 32 and 64 bits
https://software.cisco.com/download/release.html?mdfid=286281272&flowid=72042&softwareid=282364313&release=3.1.06073&relind=AVAILABLE&rellifecycle=&reltype=latest
Reference link:
http://www.cisco.com/c/en/us/td/docs/security/asa/compatibility/asa-vpn-compatibility.html#47680
And yes you can use ASDM to upload the file to the ASA flash , just go to Tools > File managment.
Please rate helpful posts !
Hope it helps
- Randy -

Nokia N8 VPN issue

hi, i install VPN client but when i synchronize the VPN policy server it shows an error "Reason code -34" can anyone help me please!!!????

Hi,
You can use VPN Policy Server, if such is installed in your network and your IT Admin has given instructions to use it. Otherwise, you need to setup the VPN Policy manually. You can find more info about VPN Policy at:
http://europe.nokia.com/support/product-support/nokia-mobile-vpn/compatibility-and-download
Look at the step-by.step guide at the bottom of the page.
Like said in another post, Nokia Mobile VPN supports IPsec/IKE VPN protocols. You need to check if that is supported in the VPN GW you are using.
Thanks,
Ismo

Can you use screen sharing outside of your local network?

I've been poking around with the "screen sharing" in osx Lion. I have a few questions about it.
Firstly, is the built-in screen sharing only accessible through the finder?
Also, is it only available on local networks? I've gotten it to work on two computers on the same network. But, can I use in the built-in screen sharing to look at my work iMac while I'm at home on my Macbook? Or would I need a full VPN client to do this? (Although isn't there built-in VPN compatibility in Lion?)
Thanks!

Go here..
https://discussions.apple.com/message/16439571#16439571
... and read my post explaining the different ways to share your screen. Things should be a little clearer for you, I hope.
Bob

Best Way To Manage 1 Computer from Another

I got my mom a MacBook and I have a MacBook Pro. She's new to Mac and is very unfamiliar with it. Every now and then she runs across issues she can't resolve herself. I'd like to be able to access her computer from my computer while we are in different cities.
What's the best way to do this? VPN?

Vladiator wrote:
I'd like to access Mac OS X remotely from a PC. Are there any applications I can use for this?
I do that with the previously mentioned LogMeIn (which is free.) I also use OSX's Screen Sharing with a VNC client on the PC, although some PC VNC clients do not work correctly with Screen Sharing. Most of the time I just use LogMeIn since I don't have to worry about firewalls and routers, or worrying about VPN compatibility with whatever router is being used at a friends house or Wi-Fi hotspot.

Nokia Reader - Ovi Notification Error - Post Anna ...

After Anna Update,
Ovi Notifications Error:
Ovi Notification Service is not available. Try to restart your device. If the problem persists, please do a clean reinstall of the application.
I uninstalled, *#7370#, installed Store QML, CNN INtl, Drop.. all working expect for this.
Please Fix. I love this App a lot!

Hi,
If you have a problem downloading Mobile VPN Client from Nokia Store, you can find the installable SIS package also at Nokia Mobile VPN web site:
http://europe.nokia.com/support/product-support/nokia-mobile-vpn/compatibility-and-download
For Symbian Anna the correct version of Nokia VPN Client is 4.3.
Thanks,
IsmoK

Check Point VPN-1 Secure Client Software Compatibility w/ Intel iMac

Is this SW compatible with the new iMac? I'm trying to install a Secure Client SW but it stops in the middle of installation giving out only a general message - there were errors during the installation. Please help.
Thanks.

The CheckPoint VPN-1 Secure Client software is only compatible with Mac OS v 10.3 (Panther). I had the same issue and am waiting for CheckPoint to update the software.
Miguel

X200 WWAN (f3507g) compatibility issue with Juniper Network Connect VPN

I have just recently received my X200 with the build-in WWAN which is a Ericsson f3507g card and found that it causes my Juniper VPN software unable to load, and I have also noticed other applications like Outlook is rather slow. When I "Disabled" the WWAN card in "Device Manager"->"Network Adapters", all apps work perfectly. I am using 32-bit Vista Business.
Can someone test and see if you have the same problem as mine? I am wondering if this is a driver issue of the f3507g WWAN card.

Hello
I have just spent all day trying to work out why Outlook takes forever to connect on initial start. It was purely by luck/perseverance that I happened to notice an "ipconfig" stuck for a second on LAN2 - which is the ericsson card.
I too then disabled this adapter and found Outlook performance cured. I had popped along to these forums to find a fix but at least I can verify the issue with you.
Bloody annoying since I've only had the X301 1 day - I bought it for use whilst my X300 is having its wireless-freezing issue sorted. Not a good advert for Lenovo I think.

VPN compatibility

Similar Messages

Maybe you are looking for