Vpn connected to Pix but no Internet Access after connection

Hi,
We have just changed over our firewall to a Pix 515. The VPN Client (4.6) has been set up and remote users can connect ok and authenticate using Windows IAS. However, once they connect to the VPN they can no longer surf the internet. Our support company are saying that this is impossible because it can cause spoofing. Is this really impossible on the Pix? Is there a way that the remote user can surf the internet via their local connection when connected on the VPN?
Many thanks for looking.
PJ.

Hello,
It is possible to connect through Cisco VPN client while keep using the internet. You have to use something called Split Tunneling. Below you can find a link how to configure split tunneling:
http://www.cisco.com/en/US/products/sw/secursw/ps2120/products_configuration_guide_chapter09186a0080172787.html
http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a0080702999.shtml
Hope this helps,
Appreciate your rating,
Regards,

Similar Messages

Windows 7: Connected to network but no internet access???

This is my first post and I have been dealing with quite an annoying problem. I used bootcamp to install windows 7 64bit on my laptop. From the beginning I could connect to my network (Wifi) but it said "no internet access." It was like this for a while until I powered on one day, fiddled with some settings (dont remember what I did) and all of a sudden the internet worked like a charm (my fiddling probably did not make it work). Sadly three days later the internet stopped working again and I did not touch any settings! I am still connected to the network. I updated to bootcamp 3.1 with no luck. I have no idea what is wrong especially since internet works perfectly on OSX. Any suggestions???

I'm sorry but I'm not posting to answer your problem but just to say that I have a very similar issue when connected to my home network through either wireless or ethernet- connection is erratic and pages hang despite showing an excellent signal strength. I have a divided drive and have windows installed on my Macbook. I have no problems on the windows side. My friends who have ipods and iphones have similar problems connecting to my home network. I have no problems connecting wirelessly to any other network that I've tried. This is a real shame as I want to use Mac software but end up in Windows all the time. Any light anyone can shed on this would be very welcome.

Able to connect ipad 2 to iphone 4s personal hotspot via bluetooth or wifi, but no internet access when connected via wifi.

I am able to connect my ipad 2 to an iphone 4s personal hotspot via bluetooth or wifi. The problem is that I only have internet access with a bluetooth connection. Both are running ios 6.1.2 and I have tried to reset both to factory settings. Any suggestions would be reatly appreciated.

Please don't shout! Using all uppercase means shouting on the internet. If your keyboard is stuck please say so, otherwise people will think you are being obnoxious.
Now the first question is, when you are saying connecting to personal hotspot, have you always been using the iPhone to connect to the internet? Are you someplace where the only place to connect is available via tethering to the iPhone's celluar network? Or do you have other options?

All my apple device has no internet access after connect to my house's wifi.

After connecting my apple ipad to my wifi, it show that there is no internet access. But my laptop can connect it and also use my wifi with internet access. My router is Wireless-G. Why can't I use my wifi????

Hi nkarthikeyan ,
You're right, in the behind configuration, there aren't any NAT configured for the simple reason which's Firewall is on production on another site and users must to connect to our Intranet to working properly so until I found a solution, I do some tests only with one desktop located on site...
I tried to add this command on my configuration but when I do it, I lost connection with computer of my site of ZAG ...
ASA5505-ZAG(config)# nat (inside,outside) source dynamic any interface
Also, I tried this configuration but without success also :/
for no-nat
object network ZAG_L2L
subnet 10.90.0.0 255.255.255.0
object network Trafic_vpn_MainSite_L2L1
subnet 10.239.80.0 255.255.248.0
object network Trafic_vpn_MainSite_L2L2
subnet 10.239.88.0 255.255.248.0
nat (inside,outside) source static ZAG_L2L ZAG_L2L destination static Trafic_vpn_MainSite_L2L1 Trafic_vpn_MainSite_L2L1
nat (inside,outside) source static ZAG_L2L ZAG_L2L destination static Trafic_vpn_MainSite_L2L2 Trafic_vpn_MainSite_L2L2
And to finish my questions, can you explain me this point please :
Also you need to place your real ip address in interface ACL's instead of NATed ip address...
Thanks for your support !
I really appreciate it !

Connected to 3G, but no internet access

Hello,
I have an iPhone 4S running the latest firmware, iOS 7.1.2. I have been unable to access the internet on 3G since Tuesday (July 8, 2014). I can access the internet on Wi-Fi, however. I brought my phone into the Apple Store today, the Genius associate tried:
Resetting the phone by holding the Home + Power button
Restoring the phone to factory defaults
Resetting the network settings
Reseating the SIM card
He put my SIM card in another phone and it didn't work on that phone either. I purchased a new SIM card from my provider, hoping it would fix the problem, but I still cannot connect to the internet on 3G.
I have tried everything (except the last step) on iPhone: Troubleshooting a cellular data connection, and nothing is working for me. Is there anyone else having this problem, or has had this problem and had this resolved? Thank you!

Hi,
What type of wireless router are you using?
Try checking the IP address of the iPhone. Just tap Settings> Wi-Fi> tap the blue(>) next to your network.
If the iPhone has a 169.254.x.x IP it will not be able to browse the Internet. This article: http://support.apple.com/kb/TA26003 provides more information about self-assigned IP addresses.
Also if you are using WEP security, make sure you have a 5 or 13 character password as shown here: http://support.apple.com/kb/HT1344
-Jason

Connected to WiFi but no internet access

Hi,
I just got my Z10 yesterday, and I when I try to connect to internet via my WiFi, it wont work. In the status bar, the device shows the wireless sign, and in the settings it shows that it is connected to my network (via WPA2 Personal).
I am not using BES.
All my other devices connected to the WiFi network work OK. Ipad, laptop, PC.

I have same issue...my z10 disconnects after 5 minutes and all other gadgets including BB curve works fine on the wifi i have at home

No Internet access after cisco vpn client connection

Hi Experts,
Kindly check below config.the problem is vpn is connected but no internet access
on computer after connecting vpn
ASA Version 8.0(2)
hostname ciscoasa
enable password 8Ry2YjIyt7RRXU24 encrypted
names
interface Ethernet0/0
nameif outside
security-level 0
ip address 192.168.10.10 255.255.255.0
interface Ethernet0/1
nameif inside
security-level 100
ip address 192.168.14.12 255.255.255.0
interface Ethernet0/2
shutdown
no nameif
no security-level
no ip address
interface Ethernet0/3
shutdown
no nameif
no security-level
no ip address
interface Management0/0
shutdown
no nameif
no security-level
no ip address
passwd 2KFQnbNIdI.2KYOU encrypted
ftp mode passive
access-list dubai_splitTunnelAcl standard permit 192.168.14.0 255.255.255.0
access-list INSIDE_nat0_outbound extended permit ip any 192.168.14.240 255.255.2
55.240
pager lines 24
mtu inside 1500
mtu outside 1500
ip local pool testpool 192.168.14.240-192.168.14.250
no failover
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 0 access-list INSIDE_nat0_outbound
nat (inside) 1 0.0.0.0 0.0.0.0
route outside 0.0.0.0 0.0.0.0 192.168.10.12 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout uauth 0:05:00 absolute
dynamic-access-policy-record DfltAccessPolicy
http server enable
http 192.168.14.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec transform-set setFirstSet esp-3des esp-md5-hmac
crypto dynamic-map dyn1 1 set transform-set setFirstSet
crypto dynamic-map dyn1 1 set reverse-route
crypto map mymap 1 ipsec-isakmp dynamic dyn1
crypto map mymap interface outside
crypto isakmp enable outside
crypto isakmp policy 1
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 43200
crypto isakmp policy 65535
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
telnet timeout 5
ssh timeout 5
console timeout 0
threat-detection basic-threat
threat-detection statistics access-list
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect netbios
inspect rsh
inspect rtsp
inspect skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect tftp
inspect sip
inspect xdmcp
service-policy global_policy global
username testuser password IqY6lTColo8VIF24 encrypted
username khans password X5bLOVudYKsK1JS/ encrypted privilege 15
tunnel-group mphone type remote-access
tunnel-group mphone general-attributes
address-pool testpool
tunnel-group mphone ipsec-attributes
pre-shared-key *
prompt hostname context
Cryptochecksum:059363cdf78583da4e3324e8dfcefbf0
: end
ciscoasa#

Hi Harish,
Please check the o/ps below and route print in attached file
Latest ASA Config
ASA Version 8.0(2)
hostname ciscoasa
enable password 8Ry2YjIyt7RRXU24 encrypted
names
interface Ethernet0/0
nameif outside
security-level 0
ip address 192.168.10.10 255.255.255.0
interface Ethernet0/1
nameif inside
security-level 100
ip address 192.168.14.12 255.255.255.0
interface Ethernet0/2
shutdown
no nameif
no security-level
no ip address
interface Ethernet0/3
shutdown
no nameif
no security-level
no ip address
interface Management0/0
shutdown
no nameif
no security-level
no ip address
passwd 2KFQnbNIdI.2KYOU encrypted
ftp mode passive
access-list dubai_splitTunnelAcl standard permit 192.168.14.0 255.255.255.0
access-list INSIDE_nat0_outbound extended permit ip any 192.168.14.0 255.255.255
.0
pager lines 24
mtu outside 1500
mtu inside 1500
ip local pool testpool 192.168.15.240-192.168.15.250
no failover
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 1 0.0.0.0 0.0.0.0
route outside 0.0.0.0 0.0.0.0 192.168.10.12 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout uauth 0:05:00 absolute
dynamic-access-policy-record DfltAccessPolicy
http server enable
http 192.168.14.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec transform-set setFirstSet esp-3des esp-md5-hmac
crypto dynamic-map dyn1 1 set transform-set setFirstSet
crypto dynamic-map dyn1 1 set reverse-route
crypto map mymap 1 ipsec-isakmp dynamic dyn1
crypto map mymap interface outside
crypto isakmp enable outside
crypto isakmp policy 1
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 43200
crypto isakmp policy 65535
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
no crypto isakmp nat-traversal
telnet timeout 5
ssh timeout 5
console timeout 0
threat-detection basic-threat
threat-detection statistics access-list
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect netbios
inspect rsh
inspect rtsp
inspect skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect tftp
inspect sip
inspect xdmcp
service-policy global_policy global
group-policy mphone internal
group-policy mphone attributes
split-tunnel-policy tunnelspecified
split-tunnel-network-list value dubai_splitTunnelAcl
username testuser password IqY6lTColo8VIF24 encrypted privilege 15
username testuser attributes
vpn-group-policy mphone
username khans password X5bLOVudYKsK1JS/ encrypted privilege 15
username khans attributes
vpn-group-policy mphone
tunnel-group mphone type remote-access
tunnel-group mphone general-attributes
address-pool testpool
tunnel-group mphone ipsec-attributes
pre-shared-key *
prompt hostname context
Cryptochecksum:12308d7ff6c6df3d71181248e8d38ba8
: end
ciscoasa#
Route Print after vpn connection
C:\>route print
===========================================================================
Interface List
0x1 ........................... MS TCP Loopback interface
0x40003 ...00 24 01 a2 e6 f1 ...... D-Link DFE-520TX PCI Fast Ethernet Adapter -
Packet Scheduler Miniport
0x250004 ...00 05 9a 3c 78 00 ...... Cisco Systems VPN Adapter - Packet Schedule
r Miniport
===========================================================================
===========================================================================
Active Routes:
Network Destination Netmask Gateway Interface Metric
0.0.0.0 0.0.0.0 192.168.10.1 192.168.10.211 20
127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1
192.168.10.0 255.255.255.0 192.168.10.211 192.168.10.211 20
192.168.10.211 255.255.255.255 127.0.0.1 127.0.0.1 20
192.168.10.255 255.255.255.255 192.168.10.211 192.168.10.211 20
192.168.14.0 255.255.255.0 192.168.15.1 192.168.15.240 1
192.168.15.0 255.255.255.0 192.168.15.240 192.168.15.240 20
192.168.15.240 255.255.255.255 127.0.0.1 127.0.0.1 20
192.168.15.255 255.255.255.255 192.168.15.240 192.168.15.240 20
213.42.233.97 255.255.255.255 192.168.10.1 192.168.10.211 1
224.0.0.0 240.0.0.0 192.168.10.211 192.168.10.211 20
224.0.0.0 240.0.0.0 192.168.15.240 192.168.15.240 20
255.255.255.255 255.255.255.255 192.168.10.211 192.168.10.211 1
255.255.255.255 255.255.255.255 192.168.15.240 192.168.15.240 1
Default Gateway: 192.168.10.1
===========================================================================
Persistent Routes:
None
C:\>
C:\>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : asu
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Unknown
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
Ethernet adapter Local Area Connection 7:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : D-Link DFE-520TX PCI Fast Ethernet A
dapter
Physical Address. . . . . . . . . : 00-24-01-A2-E6-F1
Dhcp Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.10.211
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.10.1
DNS Servers . . . . . . . . . . . : 213.42.20.20
195.229.241.222
Ethernet adapter Local Area Connection 8:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Cisco Systems VPN Adapter
Physical Address. . . . . . . . . : 00-05-9A-3C-78-00
Dhcp Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.15.240
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :

HT1595 apple tv will connect to network but not internet

apple tv will connect to network but not internet

I have unplugged the apple TV but it still says noat connected. However, it has accessed some movies but when I try to purchase or download from say netflix, it cannot.

Hi Team, Showing Yellow icons after every 15 to 20 Min and internet stop working.when we enable- disbale the network connection then will internet start working fine.Some time network connection is disable but when we renable that connection it will st

Hi Team,
Showing Yellow icons after every 15 to 20 Min and internet stop working.when we enable- disbale the network connection then will internet start working fine.Some time network connection is disable but when we renable that connection it will stuck on enabling
and will not renable till i am not restart that machine. I have 350 Machine in network but facing this issue in 25 machines. Kindly help me on this issue .
Regards
Sahil bhateja

Hi，
So switch a LAN card fix this issue...seems a compatibility issue or maybe some packs or programs you installed recently cause this issue.
Have you manually check the network adapter driver from the PC's manufacture website? sometimes, it will be a time delay before Microsoft push out the driver update.
Check if issue exists in safemode with network, this mode will launch Windows with limited sets of files and drivers.
if you have a restore point, restore the pc to a previous point at which the pc is functioning fine.
Yolanda Zhu
TechNet Community Support

"No Internet Access" on connected device with mobile hotspot

I've been on Verizon for 2 weeks. Note II on a Family Share Plan with lots of data. Using the built-in Verizon Mobile Hotspot application. Connecting from my work laptop, which is Windows 7.
Set it up and everything worked fine for a week and a half. I had no problems connecting or accessing the internet from my laptop. It worked fine Monday morning. Monday afternoon my laptop started giving me the warning message "No Internet Access" when connecting to the phone's hotspot. I'm in a 4g area where the hotspot has worked previously. I've tried several times in several different 4g locations as time allowed over the last 2 days, and I have not been able to get to the internet on my connected laptop again.
While connected to the mobile hotspot I ran Windows troubleshooter and it tells me that there is no DHCP server available, and that the default gateway for this network is unreachable. My laptop has no problems reaching the internet via the wireless network at work or at home. The laptop connects to both of those wireless networks every day (both before and since this problem appeared.)
I have rebooted both the phone and the laptop, with no change in the problem results. I renamed the hotspot, and connected to the "new" hotspot from my laptop, with no change in the problem results. I have tried running "ipconfig /renew" from my laptop while connected, and that is when it tells me that it cannot find a DHCP server for this network.
What broke? How can I fix it?
I'm still in the 100% refund return period on my contract and phones (for another day or so.) This is an absolute deal-killer. Hotspot on my phone is the single reason why I switched networks.
* Revised 2/28:
This morning I turned on the mobile hotspot feature on my wife's Galaxy S3 (on the same Verizon Family Share Plan.) Then I connected to it from my laptop. When it connected it said "limited internet access" for about 30 seconds, and then that warning went away and I had full access. I surfed for a moment to confirm, and all was working. I turned off the GS3 hotspot and turned on the hotspot on my Note II. When I connected to the Note II's hotspot from my laptop I still had no internet access. I left it for 3-4 minutes, and it never switched on. I tried surfing and got only error messages in my browser.
All of this was while sitting at my desk. So I believe I have ruled out the laptop as a cause for this problem.
Thanks in advance,
Randy

After I posted the above in February I talked to Verizon support. They could not resolve the problem. They replaced the phone, and the new phone has worked for months. My work schedule changed a bit, and so I started using the hotspot less often.
Last week I noticed that after I connected my laptop I had a longer delay before it would change from "No Internet Access" to giving me access. Yesterday morning it was so slow that I got the command prompt up on my laptop and determined that from the laptop's perspective the problem was that there was no DHCP server available through the hotspot network. That morning it did eventually find the DHCP server and issue my laptop an IP address, and let me connect.
Yesterday afternoon the DHCP server never appeared, and I was not able to connect to the internet. Same thing this morning. I rebooted both the phone and the laptop. No change. The laptop connects to other wireless networks just fine, still. This worked for months. Why did it slow down connecting and then stop? I'm guessing there must be some sort of buffer that has filled up.
Anyone have any ideas?
Thanks in advance.

WRT54G can connect to router but not internet

A few days ago, I stopped being able to connect to the internet through my router. I have a desktop which is connected to my cable modem. My desktop connection works fine, but I cannot connect wirelessly with my laptop. Even if I connect a wired connection to my router, it will not connect to the internet. I have tried updating firmware and that did not help. When I try to diagnose the problem through windows, it tells me that "There may be a problem with the DNS". Also, when I look at the status tab in the router site, it shows that the IP address, Subnet Mask, and Default Gateway are all 0.0.0.0. Any ideas?

hey guys you have your connections the wrong way...
here's what your connection should be the cable modem should always be connected to the router, that means that the desktop (which is online) should not be connected to the modem...because, the your modem might only give out one ip address that means only ONE device behind the modem can go online, now either the router or the desktop gets the internet connection.so if your desktop is the one getting the ip address from the modem, so make sure that the modem is connected to the ROUTER ONLY...
after connecting the modem to the router, connect the computer at the back of the router, so all the devices should be connected behind the router. in that way the router could get the internet connection from the modem and the router could give multiple ip addresses on all of the devices or computers that you're gonna connect to the router...
then if ever the router still doesn't give internet connection try resetting the router and try to reconfigure it as well....

Im connected to wifi but the internet wont work?

im connected to wifi but the internet wont work how do i make it work

Go to settings, then wifi. There, you can choose a wifi router and if needed, enter the password. You haven't provided any details in your post. Are you trying to connect to a home network? A commercial network?

TS2774 hi i have done the settings that mentioned in apple support threads but it wont work for me i am using BSNL cellone SIM and activated 3G too but unfortunately internet is not connecting but my facebook is updated and also showing the data statistic

hi i have done the settings that mentioned in apple support threads but it wont work for me i am using BSNL cellone SIM and activated 3G too but unfortunately internet is not connecting but my facebook is updated and also showing the data statistics

They are not a supported carrier. You'll have to take it up with them.

My apple 5th gen ipod is connected to wifi but still cannot access safari and other websites..can some1 help me out?

my apple 5th gen ipod is connected to wifi but still cannot access safari,itunes and other websites. the ip address is not strtng wid 169 and i have reset the network settings also..can some one help me out

The 169 IP address mans it did not correctly negotiate with the router:
Does the iOS device connect to other networks? If yes that tend to indicate a problem with your network.
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

No internet access after hard reset.

I hit the hard reset button on my router and now my computer & other devices can not access the internet. I can connect to my router but have no internet. It was working fine earlier today until it was hard reseted.
I ran windows troublshoot and I got: 'The network gateway is accessible, but Windows couldn't receive network traffic from the internet."
Solved!
Go to Solution.

All my devices finally gained internet access after again hard reseting my router and then power cycling my modem, router, and pc. Thanks Eddie 956for not giving up on yourself!

Vpn connected to Pix but no Internet Access after connection

Similar Messages

Maybe you are looking for