VPN Connection Established but now cannot access the internet

I am running Mac OS X 10.4 and have successfully downloaded Cisco VPN Client version 4.9.01.0080.
Although I can successfully establish a connection, I am no longer able to connect to the internet - my internet connection can only be regained if I disconnect from the VPN.
Please note I am NOT a technical resource so please provide the 'for dumnmies' version of any suggestions!
Thanks.
Debra

I am still unable to get out on the Internet. Ironically, my Skype still works. I cannot reach Internet sites by name. After carefully going through config I already had split-tunneling which is why it works for my Windows machines.
I have only tested this Macbook Pro 17 and no other MAc frankly, but I'll try on another Mac.
Any other ideas a.alekseev?
This is what I have done:
I have split tunneling, I have the newest Cisco VPN Client for Mac, I can VPN in with my username and everything, ut I cannot hit websites by name. Basically I am unable to resolve. I opened a gaping hole on the firewall just to test and still nothing.
What's next?

Similar Messages

I did a software update on my ipad and now cannot access the internet. how can i fix this?

I did a software update on my ipad to 8.1 and now cannot access the internet. How do I fix this? My mail updates, but to get internet access I had to move from wifi to cellular data, and now even cellular data does not allow me access.

Hi Go to settings Reset Network Settings After Reset you need to enter your Router wireless key Before you do this turn off your Router for 30 seconds Also an option is to go on Websites for your make of Router look for any Firmware updates but you can do this later. Cheers Brian

TS1398 When my iphone connects to wifi, everything else in my house will not connect to the internet. They all show 3 to 4 bars on connection strength, but unable to access the internet. The second I turn off the wifi on my iphone, everything runs perfec

When my iphone connects to wifi, everything else in my house will not connect to the internet. They all show 3 to 4 bars on connection strength, but unable to access the internet. The second I turn off the wifi on my iphone, everything in my house runs fine. What is going on?

Had a similar problem a number of years ago with a laptop my daughter had. The probelm turned out to be the router. What kind of router do you have? Have you checked for firmware updates, or at least tried re-booting it?

Firefox will not connect to websites, it just says "connecting" constantly, but I can access the internet using IE.

For the last 2 days I have had a problem with Firefox. When I start it, one or two pages will open, sometimes 3 or 4, but then if I try to open any more tabs it will just get stuck connecting to it and never go to the page. Once it starts this infinite-connection process, the pages previously opened do not work anymore either. If you try to navigate in them, they will respond the same way. I have tried connecting in IE, and it works. I did upgrade to Firefox 6 yesterday, but I was having the problem before that (which is why I tried upgrading).

I have tried all of the options in that first link you showed and none worked. I also configured my firewall (Windows Firewall) and ensured firefox was in the "Allow" list, which it was. I still have the issue.
I did notice something interesting though. When I first checked the firewall, Mozilla firefox wasn't on the list at all. I had to manually add it and then made sure it was allowed to connect to the internet. Even after I uninstalled and reinstalled firefox, I never got one of those windows notifications asking me if I wanted to add a rule for firefox. Checking the firewall settings again, firefox was still absent. I don't think it matters, firefox doesn't work with no rules at all in the firewall, or if I manually add the rule and allow firefox to connect.
Any other thoughts?
Thanks in advance for your help

I'm trying to connect to my work's VPN. I am connected to the VPN, but I cannot access the server. I keep getting a message that says the server may not exist or is unavailable. I know that's not the case because my coworkers are connected. Can someone

I'm trying to connect to my work's VPN. I am connected to the VPN, but I cannot access the server. I keep getting a message that says the server may not exist or is unavailable. I know that’s not the case because my coworkers are connected. Can someone please help me?

I have the same problem. It is only with tv shows and only with programs I have downloaded after the software update.
Apple support sent me the above link too....but it doesn't solve the problem...my computer is authorized and the content is in my library and will play on my Mac air, but it will not sync the tv shows, it keeps saying my computer isn't authorized for it.
No answers here, but you are definitely not alone with this issue.

I installed Mountain Lion on my iMac. Now I cannot access the Internet. All the other computers and tablets have no problem. I did PRAM and MC reset, modem reset, etc., all the usual ju-ju. I also cannot connect on my local network to any other computer.

I installed Mountain Lion on my iMac. Now I cannot access the Internet. All the other computers and tablets on the network have no problem. I did PRAM and MC reset, modem reset, etc., all the usual ju-ju. I also cannot connect on my local network to any other computer. Yet Network control panel says I am connect to the modem, and Network Diagnosis says I am connected to the Internet. It's like the blind man who has eyes that cannot see. BTW, I am not some newbee. I have been a Machead since the early nineties and set up a half dozen networks, including the one I am using at home to which the iMac mysteriously is there but not. This has me stumped! I am considering going back to 10.7!

Select  ▹ System Preferences ▹ Network ▹ Advanced ▹ TCP/IP. What values are shown for the following:
Configure IPv4
IPv4 Address
Subnet Mask
Router

Equium P200-1IR - Wireless is connected but cannot access the internet

Hi ya,
Need a little help!!
I have just bought an Equium P200-1IR.
I have turned the wi fi on.
I can see my router which is Talk Talk.
I can get the laptop to connect to the router and it says that I am connected,
however I cannot access the internet.
I tried the same process by inserting a wi fi dongle into the USB port
on the laptop and exactly the same happens.
We have other computers in the house that connect to the router and internet
ok using the wireless dongle.
I have plugged a hard wire connection from the laptop to the router and I can
access the internet immediately with no problems, however would love
to use the wireless feature.
Any help really appreciated....Thanks
Waynec

Do you use the right channel and right encryption settings?
This should be checked!
It should be able to change the WLan channels in device manager -> WLan card -> Properties -> Advanced tab
But I would also recommend disabling the encryption and password in router settings and to connect to Open Wlan of course this should be done only for testing purposes if the notebook would be able to connect to the open router, then this would mean that you used a wrong password.
How about WLan driver update? Did you update the WLan driver? If not do that!

I am connected to my wireless network but cannot access the internet. Any ideas?

I am connected to my wireless network but cannot access the internet. Any ideas?

Your router may not have given your iPad a valid IP address. Go to Settings > Wifi > your network name and touch the ">" to the right to see the network details. If the IP address starts with 169 or is blank then your router didn't provide an IP address and you won't be able to access the Internet.
Sometimes the fix can be as simple as restarting your router (remove power for 30 seconds and restart). Next, reset network settings on your iPad (Settings > General > Reset > Reset network settings) and then attempt to connect. In other cases it might be necessary to update the router's firmware with the latest from the manufacturer's support web pages.
If you need more help please give more details on your network, i.e., your router make, model and version, the wifi security being used (WEP, WPA, WPA2), etc.

My iphone 5 is in disabled status but when going through the recovery process it asks for the SIM pin but I cannot access the screen as the phone wont connect to the activation server not the screen to unlock the SIM. What do I do?

My iphone 5 is in disabled status but when going through the recovery process it asks for the SIM pin but I cannot access the screen as the phone wont connect to the activation server not the screen to unlock the SIM. What do I do?

That's usually a symptom of a phone that was hacked or jailbroken to unlock it.

I cannot access the internet, I tried to answer that said to go to settings, safari, tap clear history, cookies and cache, cut off, then on, but it did not work. When I go to internet the screen is grey??? please help I am a new user!!

I cannot access the internet the screen is grey, I have tried by using the answer from someone but it does not work...I went to settings, tap safari, then clear the history, cookies, and cache, then turn off ipad. When I did that twice, it did not work. How long does it take for the clear history to work? I am a brand new
user of the ipad2 and I am disappointed that this is happening already.

Have you been able to access the internet previously and now it's suddenly not working, or are you still trying to access the internet for the first time on your iPad? Are you at home trying to connect through your home router? If you are at home, did you put your home routers encryption code as your password? The encryption code is what your iPad is looking for and it is usually found on the router and is typically a 13 digit combination of letters and numbers. Let us know......

MY APPLE TV SHOWS THAT iT IS CONNECTED TO MY WIFI, BUT CAN NOT ACCESS THE INTERNET

my apple tv found my wifi, but can not access the internet??

I have been on the phone with Apple, done all of the trouble shooting they have recomended. When I attempt to connect it to the internet I get a message reading "your apple tv is connected to your wi-fi but cannot connect to the internet. I have plugged the modem right into the apple tv and it still won't work. This is the second device I've used. (apple gave me a new one after the first didn't work). I just thought there might be someone out there who had the same issue and knows how to resolve it.

Cannot access the internet even though I'm connected to my WIFI network

I cannot access the internet even though I am connect ed to my home network or guest network. My desktop pc works fine, but not the laptop.

The new laptop shows it is connected but will not let me access with passwords I have written down. What or where is the password it is looking for?

HT1766 For some unknown reason, I cannot access the internet through my Wi-Fi connection, even in my own house with the computer on. What shall I do?

I cannot access the internet with my Wi-Fi connection on my IPad2. It began with my trying to reply to a message. I then got a msg that I had the wrong password or user name. Now I have no access and cannot get or send mail, or access the internet. What shall I do?

If you have access to wifi router you may check its log and see what does it say...
Try set the router for no hidden and no password wifi and try to connect. If you iPad can connect then add password to wifi settings on the router and try to connect again... etc...

My computer cannot access the Internet, but my iPad can...

My computer cannot access the Internet; it keeps saying "a connection timeout occurred," but my iPad is connecting fine. I'm running OSX 10.8.2

Back up all data.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
Enter the name of your wireless network in the search box. You should have one or more "AirPort network password" items with that name. Make a note of the name and password, then delete all the items. Quit Keychain Access. Turn Wi-Fi off and then back on. Reconnect to the network.

I have upgraded my iPhone to iOS 5.1 and now cannot access the camera from a locked screen. Has anyone else had this problem?

I have upgraded my iPhone 4S to iOS 5.1 and now cannot access the camera from a locked screen. Anyone have any suggestions?

From the lock screen, to access the camera you touch the camera icon and slide in an upward motion. It no longer takes a tap to get it to open.

VPN Connection Established but now cannot access the internet

Similar Messages

Maybe you are looking for