VPN Connectivity from Mac to Windows Server

I have been using Windows OS all my life, now I recently bought a new Mac machine, and it my first time using Mac OSX Lepord, so I don't no much, I tried to connect my Mac to a VPN - windows using the mac VPN Connectivity provided which uses tunneling Protocol, I am successful in establishing connectivity to windows server, but the problem is, it still uses ip address assigned by the router while rowsing, and not the ip address of the VPN machine while browsing sites, the reason I use VPN connectivity is to bypass ISP who blocks most of the useful sites. I tried to set proxy setting in my safari browser, but failed and also automatic proxy does not work, can someone hep me and tell me how to achieve what I am trying to achieve using MAc.

exero –
Though this will be a pain it will help trace down the problem.
Since you are attempting to VPN to the SBS what happens if you connect the Mac locally dose RDP connection map the drives and can you map to the SBS shares directly?
What happens if you try connecting with a PC via the VPN?
Also (though risky) I would open all the ports on your firewall that point to the SBS and try connecting to the VPN again with Mac and see what happens. (Don’t forget to close them back).
Below are two links that may provide some additional information. The first is from Microsoft and list all of the ports used by MS products. The second one is a public post that focuses on SBS 2003.
http://www.microsoft.com/smallbusiness/support/articles/refnet_ports_msprod.mspx
http://www.howtonetworking.com/sbs/rwwports.htm
Best of Luck –
BH

Similar Messages

Domain computers can't runt RD Web applications when connected from outside company – Windows server 2012 R2

Hi Everyone,
I have a question related to RDweb service.
I have successfully installed RD web role on windows server 2012 R2.
All went ok. I also installed a valid third party certificate.
I can connect from outside to the server and run applications using any devices: Ipad’s, mobiles and laptops.
The problem is that: Any Computer/Laptop that is joined on the domain can connect to RDWEB from outside the company BUT CAN'T RUN ANY APPLICATIONS. The RD session is taking long time it failes.
Note that from inside the network is working.
What it can be?
Thank you in advance,
Criss

Hi,
The internet connection from where I’m doing the tests is quite good. I think the error with the latency is not relevant because probably the computerRD gateway it doesn’t allow it and that way it fails with this error. For a computer that never been joined
on the domain is working perfect no delay at all..
We are using RD Gateway … installed everything on the same machine Windows server 2012 R2.
When I click RemoteApp I see the remote the prompt of RD gateway, I click ok, then nothing happened for 2-3 min. after this time it brings the error with the delay.. OR “couldn’t connect on the remote computer because an error occurred on the remote
computer that you want to connect to.”
Again, the connection is failing ONLY when we try to connect from outside the company and it happened ONLY with the Computers that are joined on the Domain.
EX: An user (with Office Laptop - joined on domain) can connect to RD Gateway and lunch the RemoteApp’s from inside LAN but when is leaving Home can’t run the Remote App;s. In the meantime he can connect and run RemoteApp’s with his private computer.
What it can be different between the Office and his home private computer?
For Outside users we’ve have open only port 443 on firewall. Why need to open UPD 3391?
I’ve notice that if I take a laptop that is working and join it on the domain it will have the same issue. If will dis-join it will still have the same issue after all.
Thank You

VPN connection on Mac gives "PPP Server cannot be authenticated"

Hello all
I am trying to connect my mac mini to my company's VPN. On my mac mini I tried the following to connect to VPN.
- System Preferences -> Network
- Created a new network, interface: VPN, VPN type: L2TP over IPSec, service name: Office VPN
- Configuration: default, Server Address: 222.222.22.222, Account Name: user1
Authentication Settings -> User Authentication Password: (password), Machine Authentication Shared Secret: (secret)
This does connect the mac to the vpn but after an interval of 6-10 minutes I always get a "PPP server cannot be authenticated" error. I can't seem to understand what is going wrong over here. The same problem is with every mac trying to connect to this vpn. Windows PC users did not report a problem of such sort.
I checked the system logs as well. Here's what happened until the connection was disconnected.
Thu Apr 14 14:43:02 2011 : L2TP connecting to server '222.222.22.222' (222.222.22.222)...
Thu Apr 14 14:43:02 2011 : IPSec connection started
Thu Apr 14 14:43:04 2011 : IPSec connection established
Thu Apr 14 14:43:04 2011 : L2TP connection established.
Thu Apr 14 14:43:04 2011 : Using interface ppp0
Thu Apr 14 14:43:04 2011 : Connect: ppp0 <--> socket[34:18]
Thu Apr 14 14:43:04 2011 : CHAP authentication succeeded
Thu Apr 14 14:43:07 2011 : local IP address 192.168.69.100
Thu Apr 14 14:43:07 2011 : remote IP address 192.168.1.254
Thu Apr 14 14:43:07 2011 : primary DNS address 192.168.1.84
Thu Apr 14 14:43:07 2011 : secondary DNS address 192.168.1.85
Thu Apr 14 14:43:07 2011 : l2tpwaitinput: Address added. previous interface setting (name: en1, address: 192.168.4.14), current interface setting (name: ppp0, family: PPP, address: 192.168.69.100, subnet: 255.255.255.0, destination: 192.168.1.254).
Thu Apr 14 14:43:37 2011 : l2tpwaitinput: Other Address event (8). previous interface setting (name: en1, address: 192.168.4.14), other interface setting (name: 99, family: 8716788, address: 4.0.69.100, subnet: 0.0.0.1, destination: 128.192.31.0).
**Thu Apr 14 14:43:34 2011 : IPV6CP: timeout sending Config-Requests**
Thu Apr 14 14:55:07 2011 : Connection terminated.
Thu Apr 14 14:55:07 2011 : Connect time 12.1 minutes.
Thu Apr 14 14:55:07 2011 : Sent 20233 bytes, received 48346 bytes.
Thu Apr 14 14:55:07 2011 : L2TP disconnecting...
Thu Apr 14 14:55:07 2011 : L2TP disconnected
Can somebody help me out over here? What could be going wrong over here?

I'm looking for much the same answer, so can't help with the big picture. However, the Firewall options are not in System Preferences, but in the Server Admin in the Dock. Click on it, click on the triangle next to your server's name, then go down to FIrewall.

Please help - Connection Refused - Mac to Windows Server 2012

I have downloaded MS Remote Desktop onto my brand new Macbook Air OS X and have tried to connect to my school network - which when logged in says it is "Windows Server2012"
However each time I try to log in it simply says connections refused. Nothing more.
Not sure what I can do next.
Thank you for any help,
Laura

Hi Laura,
Thank you for posting in Windows Server Forum.
Are you trying to remote desktop with IP address or hostname?
Please try both alternate way and check is there any difference between them. Also as suggested by Manouchehr Omari, please see that you have remote desktop enabled on server 2012 and related RDP port (3389) opened for remote connection to take place under
firewall setting. If possible for a try disable firewall and check. You can get more troubleshooting information from beneath link.
Remote Desktop Client on Mac: FAQ
http://technet.microsoft.com/en-in/library/dn473006.aspx
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

VPN connection from Mac at home to pc network at work

Hope someone can help as I'm lost on this..... Was using a pc laptop and had basic settings to connect to my work network: IP address of the VPN concentrator (Cisco 3000), username and a password.
Have now upgraded (at least I thought it was an upgrade!?) to MacBookPro 2.6 using 10.4.11 and tried to connect using Mac VPN with no success so tried IPSecuritas which seems like over kill but still no luck. Guess I am no use at networking!!
Any advice would be most welcome.

Last time I worked with the Cisco 30xx series (which, admittedly, was a few years ago), it only supported the Cisco client. Have you installed the Cisco client and tried?

VPN from mac to Windows SBS

I have created a VPN connection from my mac to a windows sbs successfully.
My question is how do actually access my files on my windows sbs??
I went to "Connect to Server" on "Finder" but I can't access the windows sbs files.
Any help?

exero –
Though this will be a pain it will help trace down the problem.
Since you are attempting to VPN to the SBS what happens if you connect the Mac locally dose RDP connection map the drives and can you map to the SBS shares directly?
What happens if you try connecting with a PC via the VPN?
Also (though risky) I would open all the ports on your firewall that point to the SBS and try connecting to the VPN again with Mac and see what happens. (Don’t forget to close them back).
Below are two links that may provide some additional information. The first is from Microsoft and list all of the ports used by MS products. The second one is a public post that focuses on SBS 2003.
http://www.microsoft.com/smallbusiness/support/articles/refnet_ports_msprod.mspx
http://www.howtonetworking.com/sbs/rwwports.htm
Best of Luck –
BH

Cannot connect from iMac to Windows Home Server 2011 shares

Hi guys,
I am having dificulties connecting from iMac to Windows Home Server 2011 shares.
First of all it takes so long time to discover the share in iMac, which it's called "mediaserver". After finding it i cannot connect and gives "Connection Failed: message. If i choose "Connect As.." option i wait some time and then pops out with an error: "There was a problem connecting to the server "mediaserver". The server may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and then try again."
If i try from Finder -> Go -> Connect to Server ... write in Server Address : smb://mediaserver it fails. But if i write the IP address, like: smb://192.168.1.42 it works after couple of tries. If i try now to Make an Alias for the share i get "The operation can't be completed. An unexpected error occurred (eror code -8060)."
Has anyone experienced these problems ? I have updated to Mac OS X version 10.7.3. Could that be the problem ?
Any help will be much appreciated.
Thank you in advance,
Simi

You need to reinstall the updated WHS connector for Mac. You should then be able to access your shares on WHS 2011.
The problem I'm having is I can't get Time Capsule to recognize the WHS 2011 mapped folders that show up on the desktop as a drive, so Backup won't work.

Load balancing 10g forms - Connection from new browser window not supported

Load balancing 10g forms - Connection from new browser window not supported
We're experimenting with using webcache to load balance between multiple applications servers running OC4J forms processes.
We currently have one machine with infrastructure and mid-tier (BI & Forms) installed, which is being used for the webcache functionality, this is load balancing between 2 other servers each of which just have the mid-tier (BI & Forms) installation
In order to get this to work, I had to follow the instructions in the Forms deployment guide : http://download-uk.oracle.com/docs/cd/B14099_11/web.1012/b14032/tuning.htm#sthref707
The main gist of this is that you need to set the following in the orion-web.xml file in order that the sessions are maintained:
<session-tracking
cookies="enabled">
</session-tracking>
This all works fine in most cases.
The problem I am having is if I do one of the following on the client machine:
1) From IE6 / IE7 run a copy of a forms application. Then open a new window using the "New Window" menu option, and attempt to run another forms application.
2) In IE7 or Firefox 2.0 open a copy of the forms application, and then open a new tab and try and open another forms application.
If I try either of these I get a FRM-92101 error, and the following is displayed in the java console:
oracle.forms.net.ConnectionException: Connection from new browser window not supported
From trawling various forums (including metalink and otn) it looks like a problem with the way coockies are handled.
Unfortunately the usual workaround is to ensure that the session tracking option in the orion-web.xml file is disabled.
The problem is that I need this enabled in order for the load balancing to work.
Does anyone know of any other workarounds or patches that might help resolve this?
We're using Application server 10.1.2.0.2 running on windows 2003 servers.

You were right. Carriage returns were stopping it from working (the document is laid out over separate lines, so I assumed it would make no difference...).
I've now managed to get it so the forms at least run, but they are all being run in the forms OC4J instance on the same machine as the OHS.
Has anyone actually managed to get this to work, or am I doing something wrong?
I did wonder if using an OHS instance on a machine with no forms installation would make any difference?
I had raised a support call via metalink on this subject, but they eventually came to the conclusion that the only way to do this is with a hardware load balancer (Despite several documents suggesting that webcache is the way to go (including the forms deployment manual)).
I'm at the point now of giving up and writing some custom scripts to do the job instead...

Connecting from Oracle to SQL Server

Hi
I am now tring to connect from oracle to sql server using database link.
Created database link
but when connecting to remote db getting the floowing error
select * from region@mysqlserverdsn
ERROR at line 1:
ORA-28545: error diagnosed by Net8 when connecting to an agent
Unable to retrieve text of NETWORK/NCR message 65535
ORA-02063: preceding 2 lines from MYSQLSERVERDSN
Can anyone help
My Listener File
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = D:\oracle\product\10.2.0\db_1)
(PROGRAM = extproc1)
(SID_DESC =
(GLOBAL_DBNAME = ORCL.DOMAIN.COM)
(ORACLE_HOME = D:\oracle\product\10.2.0\db_1)
(SID_NAME = orcl)
(SID_DESC =
(GLOBAL_DBNAME = NORTHWIND.DOMAIN.COM)
(ORACLE_HOME = D:\oracle\product\10.2.0\db_1)
(SID_NAME = MYSQLSERVERDSN)
(PROGRAM=hsodbc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST=
(ADDRESS = (PROTOCOL = TCP)(HOST = SALIHKM.DOMAIN.COM)(PORT = 1522))
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
My Tnsnames Entry
MYSQLSERVERDSN =
(DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=xxx.xxx.xxx.xxx)(PORT=1522))
(CONNECT_DATA=(SID=MYSQLSERVERDSN))
(HS=OK)
Lsnrctl is working fine.
c:\>lsnrctl start
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 18-MAY-2006 18:53
:13
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Starting tnslsnr: please wait...
TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Production
System parameter file is D:\oracle\product\10.2.0\db_1\network\admin\listener.or
a
Log messages written to D:\oracle\product\10.2.0\db_1\network\log\listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=SALIHKM.DOMAIN.COM)(POR
T=1522)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROCipc)
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=SALIHKM.DOMAIN.COM)(POR
T=1522)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Produ
ction
Start Date 18-MAY-2006 18:53:16
Uptime 0 days 0 hr. 0 min. 3 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File D:\oracle\product\10.2.0\db_1\network\admin\listener.o
ra
Listener Log File D:\oracle\product\10.2.0\db_1\network\log\listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=SALIHKM.DOMAIN.COM)(PORT=1522)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROCipc)))
Services Summary...
Service "NORTHWIND.DOMAIN.COM" has 1 instance(s).
Instance "MYSQLSERVERDSN", status UNKNOWN, has 1 handler(s) for this service..
Service "ORCL.DOMAIN.COM" has 1 instance(s).
Instance "orcl", status UNKNOWN, has 1 handler(s) for this service...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
But Tnsping show no listener
C:\>tnsping MYSQLSERVERDSN
TNS Ping Utility for 32-bit Windows: Version 10.2.0.1.0 - Production on 18-MAY-2
006 18:56:27
Copyright (c) 1997, 2005, Oracle. All rights reserved.
Used parameter files:
D:\oracle\product\10.2.0\db_1\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION= (ADDRESS=(PROTOCOL=tcp)(HOST=xxx.xxx.xxx.xxx)(P
ORT=1522)) (CONNECT_DATA=(SID=MYSQLSERVERDSN)) (HS=OK))
TNS-12541: TNS:no listener
Services
C:\>lsnrctl services
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 18-MAY-2006 19:00
:04
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=SALIHKM.DOMAIN.COM)(POR
T=1522)))
Services Summary...
Service "NORTHWIND.DOMAIN.COM" has 1 instance(s).
Instance "MYSQLSERVERDSN", status UNKNOWN, has 1 handler(s) for this service..
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
Service "ORCL.DOMAIN.COM" has 1 instance(s).
Instance "orcl", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
Service "orcl" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:1 refused:0 state:ready
LOCAL SERVER
Service "orclXDB" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
Handler(s):
"D000" established:0 refused:0 current:0 max:1002 state:ready
DISPATCHER <machine: SALIHKM, pid: 2080>
(ADDRESS=(PROTOCOL=tcp)(HOST=SALIHKM.DOMAIN.COM)(PORT=1070))
Service "orcl_XPT" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:1 refused:0 state:ready
LOCAL SERVER
The command completed successfully
I am very much confused with this situation.
Thanks & Regards
Salih Km

Hi ,
Thanks for your reply.
Contents of my initMYSQLSERVERDSN.ora file is
# This is a sample agent init file that contains the HS parameters that are
# needed for an ODBC Agent.
# HS init parameters
HS_FDS_CONNECT_INFO = MYSQLSERVERDSN
HS_FDS_TRACE_LEVEL = 0
HS_FDS_TRACE_FILE_NAME = hsmsql.trc
# Environment variables required for the non-Oracle system
#set <envvar>=<value>
set ODBCINI=c:\WINDOWS\ODBC.INI
SALIHKM.DOMAIN.COM is my system in which Oracle Test DB is Installed.
SQL Server is in another location.
In Tnsnames i specified ip address.
One more doubt.
I am using 10g Release 2 demo version.
whether it will support Hetrogeneous Services?
How to know whether a database supports HS or not?
Thanks & Regards
Salih Km

Switching from Mac to Windows with no CD

Yes, I too fell in love at first sight with the nano, and will be giving my mini to my boyfriend (who got it for me in the first place). He uses PCs and Windows.
I did a search on reformatting the mini from Mac to Windows but all the answers seemed to involve installing the iPod for Windows software. I don't seem to have this anymore, and Apple helpfully doesn't provide it for download.
Sooo...how is my boyfriend to reformat my mini for PC? Will just plugging it into a machine loaded with iTunes for Windows do it?
Sorry if this is an often asked question; maybe what I should be asking is where or whether I can get the iPod for Windows software. Will whatever is provided with the nano work for the mini on a PC?

Download the latest version of iTunes and the iPod software updater onto the PC. Install iTunes, then the iPod software updater. Then run the iPod software updater, connect the mini when told, and choose to restore.

Converting file names from Mac to Windows.

I am an Apple tech at a university that uses both PCs and Macs. We have found that we run into some problems when transferring a user's data from one platform to the other.
When transferring lots of files, what do you experienced Mac techs use for safely converting file names from Mac to Windows?
From Windows to Mac?
We've tried NameCleaner and ended up with bad results.
Please let me know if there is something good out there for these conversions.
---Timothy

The problem looks like this:
1. User wants to switch from Mac to Windows.
2. We back up the data from his Mac to a server (an X-Serve RAID).
3. We log into the server from Windows.
4. We try to pull his data from the server.
During this data transfer, it quits with an error stating that it can't finish copying the data. I wish I had the exact text, but I don't. It does this repeatedly, and stops on different files from different locations.
In essence, without "cleaning" the Mac file names, data transfer to Windows cannot successfully complete. It quits on certain Mac file names. In the past, NameCleaner has worked sometimes, but now we have had some issues with NameCleaner (which don't matter in this discussion). The goal is to find a better solution than NameCleaner.

Is transfer from Mac to Windows via external HD possible?

I have been using my mums macbook pro and now I'm moving to town for school and only have a HP laptop can I transfer my music over to an external HD from mac to windows and authorise as well? I will visit often and want to have my purchased itunes music on both. If I buy a song on my HP will it update the mac one automatically or do I need to use my external HD every time? And lastly if it does update automatically, what about music not purchased on itunes, will it transfer those as well? I am a mac noob so please keep your answers easy
Thanks any help would be appreciated.

Yes it is possible.
Connect the external drive to the MacBook Pro
Copy the entire iTunes folder from the MacBook Pro to the external drive.
Open the iTunes folder on the external drive
Rename the file iTunes Library as iTunes Library.itl
Delete the files iTunes Music Library.xml and iTunes Library Genius.itdb
Connect the external drive to the HP laptop
Install iTunes if you haven't already, close it if running
Click the icon to start iTunes and immediately press and continue to hold down the shift key until asked to choose or create a library
Click Choose, navigate to the iTunes folder on the external drive and select the file iTunes Library.itl
Authorise the laptop to your iTunes account
If you are based in the US then music purchases made on one machine can be set to automatically download to your other libraries and any iOS devices. The rest of the world, at present, is limited to downloading apps and iBooks purchased from the store. Coming soon is iCloud which will, for a fee, also allow non-store-purchased music to be backed up and synced to your computers or iOS devices via the cloud.
tt2

How to share internet from mac to windows

Any one helps me how to share internet from mac to windows? I have created an internet sharing on macbook, a Mac can connect to internet, but windows pc can't connect with this sharing. I don't know why?

I am not a Windows guru. However, in XP there is a Wireless Network icon at the lower right side. Click on that, select the network you want to join, insert the password and that's it. Any issues speak to a Windows guru.

Untrusted apps are not allowed to connect to or launch Window Server before login.

I'm getting this with the Citrix Receiver uninstaller from the command line... but not on all Mountain Lion 10.8.5 systems. Googling turns up a lot of ideas about a problem with the app or in pre/post-flight scripts, but since it works on some, I wonder. What is the mechanism that generates this error? I'm guessing there's some setting or condition that exists on one system that isn't true on the other. How do I find out?
Sep 25 10:55:21 palms sudo[74325]: joliver : TTY=ttys000 ; PWD=/Users/joliver ; USER=root ; COMMAND=/Volumes/Citrix Receiver/Uninstall Citrix Receiver.app/Contents/MacOS/Uninstall Citrix Receiver --nogui
Sep 25 10:55:21 palms Uninstall Citrix Receiver[74326]: 3891612: (connect_and_check) Untrusted apps are not allowed to connect to or launch Window Server before login.
Sep 25 10:55:21 palms Uninstall Citrix Receiver[74326]: kCGErrorFailure: This user is not allowed access to the window system right now.
Sep 25 10:55:21 palms Uninstall Citrix Receiver[74326]: _RegisterApplication(), FAILED TO establish the default connection to the WindowServer, _CGSDefaultConnection() is NULL.
Sep 25 10:55:21 palms Uninstall Citrix Receiver[74326]: kCGErrorInvalidConnection: CGSGetEventPort: Invalid connection
Sep 25 10:55:21 --- last message repeated 3 times ---
Sep 25 10:55:21 palms Uninstall Citrix Receiver[74326]: CGSRegisterConnectionNotifyProc called with invalid connection
Sep 25 10:55:21 --- last message repeated 2 times ---
Sep 25 10:55:21 palms Uninstall Citrix Receiver[74326]: kCGErrorInvalidConnection: CGSGetDockRect: Invalid connection
Sep 25 10:55:21 palms Uninstall Citrix Receiver[74326]: CGSGetCurrentDisplayMode: Invalid display 0x00000000
Sep 25 10:55:21 palms Uninstall Citrix Receiver[74326]: kCGErrorInvalidConnection: CGSGetCurrentCursorLocation: Invalid connection
Sep 25 10:55:21 palms Uninstall Citrix Receiver[74326]: CGSGetDisplayBounds: Invalid display 0x00000000
Sep 25 10:55:21 palms Uninstall Citrix Receiver[74326]: kCGErrorInvalidConnection: CGSGetCurrentCursorLocation: Invalid connection
Sep 25 10:55:21 palms Uninstall Citrix Receiver[74326]: CGSGetDisplayBounds: Invalid display 0x00000000
Sep 25 10:55:21 palms Uninstall Citrix Receiver[74326]: kCGErrorInvalidConnection: CGSGetCurrentCursorLocation: Invalid connection
Sep 25 10:55:21 palms Uninstall Citrix Receiver[74326]: CGSGetDisplayBounds: Invalid display 0x00000000
Sep 25 10:55:21 palms Uninstall Citrix Receiver[74326]: kCGErrorInvalidConnection: CGSGetCurrentCursorLocation: Invalid connection
Sep 25 10:55:21 palms Uninstall Citrix Receiver[74326]: CGSGetDisplayBounds: Invalid display 0x00000000
Sep 25 10:55:21 palms Uninstall Citrix Receiver[74326]: kCGErrorInvalidConnection: CGSGetEventPort: Invalid connection
Sep 25 10:55:21 palms Uninstall Citrix Receiver[74326]: kCGErrorInvalidConnection: CGSSetConnectionProperty: Invalid connection
Sep 25 10:55:21 palms Uninstall Citrix Receiver[74326]: kCGErrorInvalidConnection: Error enabling suspendResume handling

Contact Wacom. Unless they have updated drivers there is no workaround.
Update or remove Quicksilver.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger and Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

How do I change my Ipod from mac to windows format??

How do I change my Ipod from mac to windows format?? My Imac is not working at the moment, but I want to use my Ipod on my PC. How do I get my Ipod(mac formated) to get work on my PC??

Use iTunes on the PC to restore the iPod, or install XPlay on the PC without changing the format. Restoring the iPod will erase everything on it.
(25085)

VPN Connectivity from Mac to Windows Server

Similar Messages

Maybe you are looking for