VPN connects but does not function when resuming from sleep

THe VPN on my ibook works fine - it connects and the data goes through. but when i put it to sleep (lid close/power->sleep) and than wake it up VPN connects fine and that's all. data stucks. i disconnect it - all works, pings go and so on. i connect it again, it connects, and pings stop, tracerouting stops and that's it. any ideas?

Whatever you are connected to thinks you are disconnected by the sound of it, or it is confused about the current session and is not allowing traffic. Something in the "sign off" settings on the other may be misconfigured.
You might want to post what you are connecting to (business network, etc). PPTP? L2TP?

Similar Messages

Log-In Screen Does Not Appear When Resuming From Standby/Sleep

We are running T400s with XP SP3. From time to time when the computer comes out of standby the login screen will not appear. You just get the background image and your mouse. The mouse will move across the screen. However there is no screen saying press Ctrl+Alt+Del or swipe a finger to login. Also swiping a finger, or pressing ctr+alt+del, typing in your password and hitting Enter does not work either. It seems to be a random but frequent occurence. The couple of T400s with Vista installed do not have this problem. Any ideas?

After doing some troubleshooting I narrowed it down to the FingerPrint reader software. Sure enough after uninstalling it fixed the issue but then the finger print reader is useless. I looked at the latest Version, 3.2.0.116, readme file and it states:
<3.2.0.116>
- (Fix) Fingerprint Reader is not working ater 1 minute idle.
- (Fix) Fingerprint Reader is not working after standby/resume.
I am wondering if they are still working out the bugs, nothice the "l" missing from later. Any help would be a big plus as I need to roll out about 200 or so for my employer in the next month.

HT1386 My iOS device (Ipad mini) only appears in iTunes while cable-connected, but does not appear after diconnect the cable. How can I Wifi sync ?

Hi, My iOS device (Ipad mini) only appears in iTunes while cable-connected, but does not appear after diconnect the cable. How can I Wifi sync ?
Documents say
Whenever the computer and the iOS device are on the same network, the iOS device will appear in iTunes, and you can sync it....
But I can't see my iPad Mini in iTunes.
And my Ipad (Settings, General, iTunes Wifi Sinc) shows a message :" Sync will resume when xxx(my PC with iTunes) is available "...
Both are in the same network,
Ipad mini is is plugged in to power
. iTunes is open on the computer
what can i Do ???

Hi Skydiver119, and tks for four interest.
I have done exactly as you say, but it does not work for me.
You indicated " Navigate to the info tab and scroll down. There'll be a check box for 'sync over wifi' or something to that effect. Check that box and sync to affirm your choice."
I navigated to Summary tab (not Info Tab) and checked "Sync with this ipad over Wi-Fi"
I disconnect the wire,
and my iPad disappears from my iTunes screen.
in my iPad ->Settings -> General -> iTunes Wi-Fi Sync -> says " Sync will resume when (my PC) is available.
So, I can not sync via wi-fi
I appreciate if you can help me.

TS3276 My o2 email account does not work when sending from my MAC it will accept incoming mail but not send it gives me a message that o2 account (offline) my mac I have no problem with my iPhone or mac laptop. any suggestions please.

My o2 email account does not work when sending from my MAC it will accept incoming mail but not send it gives me a message that o2 account (offline) my mac I have no problem with my iPhone or mac laptop. any suggestions please.

Sorry for the delay...
I did what you've told me, new account and manually copied my files from Time Machine. I had lots of permissions problems, but at the end, almost everything is in order... It seems it had to be with some of the Apple Preferences, but I can't be sure, as most of them were dumped to the trash can.
I still don't have my Mail Rules back, unfortunately, although I did goggled some. It is a pity, as I had around 30 or 40 of them, getting my mail in order to each of its mailboxes, but it is a small price as the rest doesn't show the before syntoms.
Thanks for the help, anyway!!

Ethernet not connecting when resuming from sleep/hibernate

I use my mac (Win7) in clamshell mode quite often, and I leave the cables connected (ethernet, power, display, etc). I have noticed since installing the 3.0 Boot Camp drivers that the ethernet connection is not recognized after resuming from sleep/hibernate. I need to disconnect the cable and re-plug it in for the system to recognize the network. Anyone else seeing this?

Look through Power Options for sleep and network. There should be sleep, low power, etc. And if possible, maybe you can manually update drivers from the vendor (not Apple). And if Windows or your update doesn't work as well, then you can just as easy use Device Manager and "rollback" the last driver upgrade - a great feature. Also, use those Create/Restore Check Points.
I use to have trouble, got tired of having this issue, and bought a new modem to replace my 5 yr old model. Problem gone. Same can happen regarding routers, sometimes a firmware update, but I had one router that had been superceeded by 4th generation and no firmware patch anymore.

My imac is on power but does not open when pushing start button

My imac is down after 1,5 years! it is on power but does not start when i push the on button!

Does it chime or nada?
Might try an SMC Reset
http://support.apple.com/kb/ht3964
Also have a look at this Apple article
http://support.apple.com/kb/TS1367

IPhone 4s bluetooth connects but does not work handsfree

My iPhone 4s bluetooth connects but does not work handsfree. Has worked fine with My iPhone 3s. The Light on my VW turns green indicating a connect, but the phone does not work through the VWs audio.

Fixed by power cycling the iPhone

X220 very slow reconnecting to WiFi when resuming from sleep

So my X220 with the Intel 6205 card is having issues reconnecting to WiFi when resuming from sleep or hibernation. It takes about a minute for it to do so, though occasionally it will reconnect right away. Maybe 1 out of 20. When doing a cold boot or restart, it connects immediately upon the desktop showing up.
This was not always the case, in fact when I first got my X220 in June, I have not had this issue.... In fact, I don't know when it started happening, but it was maybe a couple months ago. I just thought it was my old router going bad. Well I got a new router, and it still happens. I have the latest Intel WiFi drivers from Lenovo, and I even tried downgrading to the previous driver from Intel's site. Still the same problem. I tried setting a default profile in access connections, and that does not help. In fact, it behaves the same way if I totally uninstall access connections as well. In fact I tried this on three different brand routers, and I can reproduce it on all of them (Asus, Netgear & TP-Link) so I think this is not a router issue. Other devices in the house reconnect right away with no issues (iPhone 4, PS3, Mac desktop, Dell laptop).
I currently have BIOS 1.24, but this was happening with 1.21 and 1.23 as well. My X220 originally came with 1.16, and I haven't updated it until 1.21. Unfortunately I don't remember that far back, if the problem started occuring then.
There was a brief discussion about this in another thread, but it went nowhere so perhaps this will get more attention. At least one other user reported the same issue.
Here's a clip of exactly what happens. When i press the button or open the lid from sleep, the windows wifi icon will start spinning for a few seconds, then turn into an X. then only about a minute later, does it quickly connect to the wifi and I have full signal. Manually clicking on the icon and selecting the access point does not speed up the process. It will only connect when it wants to, about a minute after resuming from sleep/hibernation.
http://youtu.be/dmboeA7HBgg
| X220 i7-2620M | 12.5" IPS | Intel 520 Series 180GB Main SSD | Mushkin 120GB mSATA SSD | 8GB RAM | Intel 6205 WiFi | BT | Win7 Pro 64 SP1 |
Solved!
Go to Solution.

Normally when a laptop running windows tries to connect to a network, it may also seek to identify certain components on the network, for example, asking the router "Who are you?". In your case, maybe the config are corrupted because the network address entries are messed up. Queries send out to the network come back with no replies, and the computer waited for the default time till timeout and it gives up.
Try this one at a time, reboot, or try all at once and reboot
TCP/IP stack repair options for use with Vista or 7.
Start, Programs\Accessories and right click on Command Prompt, select "Run as Administrator" to open a command prompt.
Reset WINSOCK entries to installation defaults: netsh winsock reset catalog
Reset IPv4 TCP/IP stack to installation defaults. netsh int ipv4 reset reset.log
Reset IPv6 TCP/IP stack to installation defaults. netsh int ipv6 reset reset.log
Reboot the machine.

Airport Card turned off when resuming from sleep - New since 10.6.6

I use safe sleep regularly, as I use my laptop at both work and home. Ever since the update to 10.6.6 though, I have had to manually turn my Airport connection back on after resuming from sleep.
Previously, although it was unreliable about connecting to a preferred network (an unrelated, but equally frustrating issue*) at least it would remain on. Now I've had to add the icon to my Menu bar just so I don't have to dig into System Preferences every single time I reawaken my laptop.
Does anyone know why this is happening, and if there is anything I can do to prevent it? I apologize if this has been asked before, but when I searched I was unable to find anything.
*This issue is unrelated and not the focus of my post, but if you happen to know about it I would absolutely appreciate your input.
When resuming from sleep, despite being between 5-20 feet from my preferred router I will often receive a dialog asking me to select from a list of SSIDs and enter a password even though that information is already saved. Then, once I complete this information Airport doesn't actually connect and the only way to resolve the issue is to turn Airport off and then back on. After this, it will automatically connect with no problems and remain connected until I put the computer into Sleep mode again.

Maybe check in your keychain and verify the password saved is correct for your wireless router?
Do you broadcast the network name?
Could you describe "unreliable about connecting to a preferred network"?
Is "use secure virtual memory" checked in the Security preference pane? If so try unchecking that maybe? If it's a hibernation issue sometimes that could cause weirdness.

Kernel panic when resuming from sleep

I've been getting random kernel panics on my MacBook Pro when resuming from sleep. That is, only when resuming from sleep - otherwise the computer is fine.
I read some other discussions on here regarding kernel panics, but it seems that an inspection of the panic.log file usually uncovered a bad USB driver or something of that nature. I have no extra peripherals on my machine, and the panic.log is fairly vanilla. In fact, every entry in the log looks like this:
Fri May 4 21:33:43 2007
panic(cpu 0 caller 0x001A429B): Unresolved kernel trap (CPU 0, Type 14=page fault), registers:
CR0: 0x8001003b, CR2: 0x30219fbe, CR3: 0x00dd9000, CR4: 0x000006e0
EAX: 0x00000001, EBX: 0x30219fbf, ECX: 0x0041e700, EDX: 0x00188fbe
CR2: 0x30219fbe, EBP: 0x253b3ca8, ESI: 0x00188fbf, EDI: 0x03d30e40
EFL: 0x00010246, EIP: 0x003c067d, CS: 0x00000008, DS: 0x253b0010
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x253b3ad8 : 0x128d08 (0x3cb134 0x253b3afc 0x131de5 0x0)
0x253b3b18 : 0x1a429b (0x3d0e4c 0x0 0xe 0x3d0670)
0x253b3c28 : 0x19ada4 (0x253b3c38 0xe 0xe 0x3c190048)
0x253b3ca8 : 0x3c176a (0x3cf4c40 0x3d30e40 0x3ef424 0x1628d8)
0x253b3ce8 : 0x38665a (0x3e5dd40 0x3d30e40 0x253b3d28 0x3c1002)
0x253b3d08 : 0x389e5b (0x393a100 0x3d30e40 0x393a104 0x393a100)
0x253b3d28 : 0x3b1448 (0x393a100 0x3d30e40 0x253b3d58 0x3bdfd9)
0x253b3d78 : 0x188511 (0x393a100 0x39e82b4 0x39e82c8 0x11cc32)
0x253b3db8 : 0x12b4c3 (0x4de87b4 0x39e8298 0x0 0x0)
0x253b3df8 : 0x124b17 (0x4de8700 0x0 0x18 0x253b3edc)
0x253b3f08 : 0x195a42 (0x253b3f44 0x0 0x0 0x0)
0x253b3fc8 : 0x19b21e (0x4678c9c 0x0 0x19e0b5 0x46947a0) No mapping exists for frame pointer
Backtrace terminated-invalid frame pointer 0xbffff358
Kernel version:
Darwin Kernel Version 8.9.1: Thu Feb 22 20:55:00 PST 2007; root:xnu-792.18.15~1/RELEASE_I386
Yes, every log entry ends with that "invalid frame pointer 0xbffff358" bit.
The only thing I can surmise is that the memory (factory installed) is faulty, given that the frame pointer address is always the same.
Can anyone shed some light on this i.e. does this sound like I'm on the right track?
MacBook Pro Mac OS X (10.4.9)

> I've installed all the latest updates (and I've been getting these same kernel panics since Oct 13).
AH HA ! Then yes the combo updater is a good first step. It's not the same as applying all the smaller updates as they come out, using this ensures that every aspect of the OS is current. Before and after you use it, Repair Permissions ...

Minor lag from GUI when resume from sleep

Hey people!
I've been on archlinux for a couple of months now and I have fixed bugs here and there but something I have just noticed yesterday (it would happen before but I couldn't say when it would occur) is that after my system resume from sleep (it's not slow, it takes 1 or 2 secs) gnome GUI is a bit slow and it doesn't stop till I reboot my pc (it doesn't occur until my pc resumes from sleep).
It's not that bad but quite annoying. I don't really know how to approach that kind of problem. I think it would be related to something like "gnome is not completly reloaded when resume from sleep and there are some infinite loop going on"...
I hope someone has a clue in here!

hey, sorry to revive an old thread, but this was the only other person I could find with this issue.
I had originally reinstalled power manager and the the pm driver because it wouldn't save any custom power settings. When I finally got it working, it wouldnt wake up from sleep just like the above user's issue.
Machine is relatively new win7x64 install with all updates (lenovo updates too) installed.
Would like to avoid a total reinstall if at all possible.

A problem with a macbook retina when resuming from sleep.

After many questions and a complete reinstall at an apple store I stil have the problem. When resuming from sleep, and sometimes seemingly at random, the machine swaps to a different application. I run several desktops full screen and it will swap to a different desktop virtually every time I resume. Not a huge deal but annoying. It seemed to start happening when I installed Office for Mac, but that might just be coincidence. I'm not running anything weird in the background, just a utility to show when the graphics card is active. Any help would he greatly appreciated.

Running games at full resolution may produce occasionally-choppy video, but nothing that would prevent you from playing. I mayself have played Portal and Left 4 Dead 2 on mine, and I haven't noticed any problems.

Marching ants when resuming from sleep - software or hardware issue?

Hello -
My new T400 thinkpad works great except periodically when resuming from sleep mode, I get squiggly marching ant lines across the screen. I can continue to log-in, open apps, etc but the lines won't go away until I restart.
Does anyone have any idea whether this is a hardware or software issue? I'm running Win 7 Enterprise.
Thanks in advance for any feedback.

This problem was fixed by disabling and then re-enabling the video driver. Updating the driver didn't work; it had to be diabled and re-enabled. According to the technician the marching ants were a result of an incorrect refresh rate (it was refreshing either too fast or two slow).
At least that took care of the issue on my T400. Hope it helps!

P35 - CPU fan reset when resumed from sleep

Hi,
I just got S3 sleep to work where it turns off all fans. The problem is that when it resumes from sleep, the CPU fan spins a lot faster than from boot. I've set it to run at 12,5 % as long as temps are under 65c. I'm guessing it runs at about 50 % when resuming from sleep. It does this until I restart the computer.
Tips?
/Edit; Just checked with SpeedFan, CPU fan normally runs at 1100 RPM, but after resume it runs at 1800 RPM. Any utility I can use that resets this to 1100 after resume?

I ended up disabling fan control in BIOS, so that SpeedFan would work in OS. This means that CPU fan runs at 100 % until OS and SpeedFan har loaded up. Tips to fix this through BIOS or whatever are welcome.

T61 - WWAN does not connect when resuming from sleep mode

Hi.
I have a T61 with integrated WWAN, which works perfectly - except I use sleep mode a lot, and when i resume from sleep mode, WWAN doesn't connect, I always get the same error - IP configuration failed. If I restart my OS, WWAN works normally again.
So far i have tried on Windows XP, Vista 32, Vista 64 and Windows 7 32 bit - always the same!
I connect via Access Connections, maybe there is a known issue?
Thank you, B

This bugs me as well. With the new Verizon software I just installed, it says "Adapter Disabled" when I resume from sleep.
I suspect a driver bug that needs to be adressed.
I use Vista Business 32bit, but had the same problem with XP.
Don Mannino

VPN connects but does not function when resuming from sleep

Similar Messages

Maybe you are looking for