VPN connects but No Ping; AFP; or SMB
Folks;
All Mac's are fully updated Tiger or Tiger Server {running dual NIC's w/ NAT;DNS;DCHP;VPN;AFP;Firewall;Windows;DNS}
I can connect using the client's IntenetConnet L2TP mechanism and the clock ticks away...
But once connected I cannot mount shares or ping.
I have verfied that these shares can be mounted if connected NOT thru the VPN.
I have read a long thread here from last year and based on that have implemented firewall rules for allowing all traffic (TCP & UPD) (In or Out) for ppp* to 19.168.2.0/24 and for 192.168.2.0/24 to ppp* {4 rules total}
I have not made any Network Routing Definitions in the VPN settings
Help Please!
How do you debug this? Where is the best documentation to read on this?
I'm going nuts!
Steve
Start by enabling logging of denied packets in the firewall settings.
Then: what IP are you trying to use to get at the server services (you should use the NATed LAN IP)?
Also the remote client must not be connecting from a network which are using the same IP range as the server LAN.
And VPN client IPs must be part of the LAN IP range.
Similar Messages
-
Cisco VPN connects but then no services are available.
Where to start:
I have a situation where by my remote office, 5 machines, connects to head office via Cisco VPN client.
Recently we have been able to make a vpn connection but once connected we have no services available like connecting to servers, internet, network drives, voip phone or even pinging any of the services. We get an IP address on the virtual network adaptor created by vpn connection but then nothing.
After a hec of amount of troubleshooting I swapped out our router, Draytek Vigor 2820, for another 2820. Same problem. I then took my Draytek Vigor from home, that does work, to the office and it works perfectly fine using the 2600 router in the office. I then tried a dlink router and that worked in office as well. So it has something to do with the 2820 router. It has been working fine for months and now recently, having changed nothing on it, it has stopped working for us with Cisco vpn connection. Does anyone have any clues as to why and what I could do on the router to resolve issue or could it be something on the cisco side that needs changing? I have already updated firmware to latest version on router.
Any help / advice would be great appreciated.
Regards,
AshleyCan you please share the configuration as there might be something that change after the upgrade that might cause the issue.
-
VPN connections: impossible to ping network's machines
Hello,
I have configured a Cisco 857 device. I can connect to the internet. I can also establish VPN connections remotely.
However, once I have established a VPN connection, I cannot ping any system on the company LAN.
I have seen several posts on these forums but I couldn't configure properly my router.
I attach my config. Is it possible to know what corrections I should do?
My LAN IPs are 10.0.0.x with a subnet mask 255.0.0.0.
For my remote clients, I have now configured it to use 255.0.1.x.
Thanks and regards,
MaCI can see in your configuration that you use
split-tunneling, which is fine.
However, I think you need add the following
line in the configuration so that your router
will NOT NAT traffics when going from 10.0.0.0/8 to 255.0.1.x/24:
no access-list 120
access-list 120 remark SDM_ACL Category=18
access-list 120 deny ip 10.0.0.0 0.255.255.255 192.168.1.0 0.0.0.255
access-list 120 deny ip 10.0.0.0 0.255.255.255 255.0.1.0 0.0.0.255
access-list 120 permit ip 10.0.0.0 0.0.0.255 any
That way, the traffics from 10.0.0.0/8 will not be NATted when going to
255.0.1.0/24 for the VPN.
CCIE Security -
RV220W IPsec tunnel connected, but no ping is working
Hello,
I have a problem with my RV220w router and IPsec connections.
The tunnel is connected, but no ping is working. I have not changed any Settings on the Client Site or Router Site. The last succsessful tunnel wit this configuration is a half year ago.
The local and remote network have different ip-address.
I have both firmware versions 1.0.4.17 and 1.0.5.8 tested.
A tunnel over PPTP is working fine. The ping works successful.
Has anyone an idea?
kind regards
Martin Schubert
Configuration:
Client Software:
- Windows 7 64Bit
- ShrewSoft VPNClient 2.2.2
n:version:4
n:network-ike-port:500
n:network-mtu-size:1380
n:client-addr-auto:1
n:network-natt-port:4500
n:network-natt-rate:15
n:network-frag-size:540
n:network-dpd-enable:0
n:client-banner-enable:1
n:network-notify-enable:1
n:client-dns-used:1
n:client-dns-auto:1
n:client-dns-suffix-auto:1
n:client-splitdns-used:1
n:client-splitdns-auto:1
n:client-wins-used:0
n:client-wins-auto:1
n:phase1-dhgroup:5
n:phase1-life-secs:86400
n:phase1-life-kbytes:0
n:vendor-chkpt-enable:0
n:phase2-life-secs:3600
n:phase2-life-kbytes:0
n:policy-nailed:0
n:policy-list-auto:0
n:phase1-keylen:0
n:phase2-keylen:0
s:client-auto-mode:pull
s:client-iface:direct
s:network-natt-mode:enable
s:network-frag-mode:enable
s:auth-method:mutual-psk-xauth
s:ident-client-type:fqdn
s:ident-server-type:fqdn
s:ident-client-data:remote.com
s:ident-server-data:local.com
s:phase1-exchange:aggressive
s:phase1-cipher:aes
s:phase1-hash:sha2-256
s:phase2-transform:esp-aes
s:phase2-hmac:sha2-256
s:ipcomp-transform:disabled
n:phase2-pfsgroup:5
s:policy-level:auto
s:policy-list-include:192.168.1.0
Router:
IpsecIKEPolicy[1]["Direction"] = "1"
IpsecIKEPolicy[1]["EncryptionAlgorithm"] = "5"
IpsecIKEPolicy[1]["LocalIdentifier"] = "local.com"
IpsecIKEPolicy[1]["ExchangeMode"] = "1"
IpsecIKEPolicy[1]["RemoteIdentifier"] = "remote.com"
IpsecIKEPolicy[1]["Presharedkey"] = "is secret"
IpsecIKEPolicy[1]["IKEPolicyName"] = "abc"
IpsecIKEPolicy[1]["LocalIdentifierType"] = "1"
IpsecIKEPolicy[1]["SALifeTime"] = "28800"
IpsecIKEPolicy[1]["DPDDetectionPeriod"] = "10"
IpsecIKEPolicy[1]["ModeConfigStatus"] = "0"
IpsecIKEPolicy[1]["XAUTHType"] = "2"
IpsecIKEPolicy[1]["DPDFailureCount"] = "3"
IpsecIKEPolicy[1]["AuthAlgorithm"] = "3"
IpsecIKEPolicy[1]["AuthType"] = "0"
IpsecIKEPolicy[1]["DHGroup"] = "5"
IpsecIKEPolicy[1]["DPD"] = "0"
IpsecIKEPolicy[1]["_ROWID_"] = "1"
IpsecIKEPolicy[1]["RemoteIdentifierType"] = "1"
IpsecVPNPolicy[1]["EnableKeepAlive"] = "0"
IpsecVPNPolicy[1]["LocalSubnetMask"] = "255.255.255.0"
IpsecVPNPolicy[1]["EncryptionAlgorithm"] = "5"
IpsecVPNPolicy[1]["AuthAlgorithm"] = "3"
IpsecVPNPolicy[1]["RemoteNetworkType"] = "0"
IpsecVPNPolicy[1]["LocalGateway"] = "0"
IpsecVPNPolicy[1]["RVGStatus"] = "0"
IpsecVPNPolicy[1]["VPNPolicyName"] = "abc"
IpsecVPNPolicy[1]["LocalStartAddress"] = "192.168.1.0"
IpsecVPNPolicy[1]["Status"] = "1"
IpsecVPNPolicy[1]["Netbios"] = "0"
IpsecVPNPolicy[1]["AutoPolicyType"] = "1"
IpsecVPNPolicy[1]["KeepAlivePeriod"] = "10"
IpsecVPNPolicy[1]["PFSKeyGroup"] = "5"
IpsecVPNPolicy[1]["SPIOut"] = "0x"
IpsecVPNPolicy[1]["KeepAliveFailureCount"] = "3"
IpsecVPNPolicy[1]["LocalNetworkType"] = "3"
IpsecVPNPolicy[1]["SALifeTime"] = "3600"
IpsecVPNPolicy[1]["IKEPolicyName"] = "abc"
IpsecVPNPolicy[1]["FailbackTime"] = "30"
IpsecVPNPolicy[1]["RemoteEndPoint"] = "remote.com"
IpsecVPNPolicy[1]["NodeId"] = "1"
IpsecVPNPolicy[1]["SALifeTimeType"] = "0"
IpsecVPNPolicy[1]["PolicyType"] = "1"
IpsecVPNPolicy[1]["SPIIn"] = "0x"
IpsecVPNPolicy[1]["RemoteEndPointType"] = "1"
IpsecVPNPolicy[1]["_ROWID_"] = "1"
IpsecVPNPolicy[1]["Rollover"] = "0"At the glance,
First, what are your netmasks for those networks? I suppose they are 255.255.255.0.
Second, check your Remote Security Group and Local Security Group on B and C for their tunnel. Maybe permutation?
Third, check Routing table (Setup->More->Advanced Routing then at the bottom Show Routing Table).
Should be something like - on B:
10.0.0.0
255.255.255.0
GW for B
10
ipsec0
and on C:
10.0.1.0
255.255.255.0
GW for C
10
ipsec0 -
VPN connects but unable to access resources on remote network
HI,
I'm able to ping the ASA interface once the VPN is connected but unable to access any of the resources located on the remote network such as shares and computers. The cisco vpn client shows data being sent and recieved when I ping the interface on the ASA but it doesn't recieve any data when I attempt to ping or access other resources on the network.
ASA Version 8.2(5)
hostname HOST_NAME
domain-name default.domain.invalid
names
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
speed 10
duplex half
interface Ethernet0/4
speed 100
duplex full
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
interface Vlan1
nameif inside
security-level 100
ip address 10.10.8.1 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address 12.x.x.x x.x.x.x
boot system disk0:/asa825-k8.bin
ftp mode passive
dns domain-lookup inside
dns domain-lookup outside
dns server-group DefaultDNS
name-server 10.10.8.2
domain-name default.domain.invalid
same-security-traffic permit intra-interface
object-group service Vipre tcp
port-object range 18082 18082
port-object range 18086 18086
object-group network town
network-object 192.168.0.0 255.255.0.0
access-list outside_20_cryptomap extended permit ip 10.10.8.0 255.255.255.0 192.168.0.0 255.255.252.0
access-list new extended permit ip host 192.168.0.1 any
access-list new extended permit ip any host 192.168.0.1
access-list outside_20_cryptomap_1 extended permit ip 10.10.8.0 255.255.255.0 192.168.0.0 255.255.252.0
access-list townoffice_splitTunnelAcl standard permit 10.10.8.0 255.255.255.0
access-list townremote_splitTunnelAcl standard permit 10.10.8.0 255.255.255.0
access-list outside_access_in extended permit tcp any interface outside object-group Vipre
access-list outside_access_in extended permit tcp any object-group Vipre interface inside object-group Vipre
access-list outside_access_in extended permit tcp any eq 3389 10.10.8.0 255.255.255.0 eq 3389
access-list test extended permit ip host 192.168.0.6 host 10.10.8.155
access-list test extended permit ip host 10.10.8.155 host 192.168.0.6
access-list test extended permit ip host 10.10.8.2 host 192.168.3.116
access-list test extended permit ip host 192.168.3.116 host 10.10.8.2
access-list test extended permit ip host 10.10.8.155 host 192.168.3.116
access-list bypass extended permit ip host 10.10.8.155 host 192.168.3.116
access-list bypass extended permit tcp 192.168.0.0 255.255.0.0 10.10.8.0 255.255.255.0
access-list bypass extended permit tcp 10.10.8.0 255.255.255.0 192.168.0.0 255.255.0.0
pager lines 24
logging enable
logging buffered debugging
logging asdm informational
mtu inside 1500
mtu outside 1500
ip local pool vpn 10.10.8.125-10.10.8.149 mask 255.255.255.0
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-522.bin
no asdm history enable
arp timeout 14400
global (inside) 1 interface
global (outside) 1 interface
nat (inside) 1 192.168.0.0 255.255.0.0
nat (inside) 1 0.0.0.0 0.0.0.0
static (inside,outside) tcp interface 18082 10.10.8.2 18082 netmask 255.255.255.255
static (inside,outside) tcp interface 18086 10.10.8.2 18086 netmask 255.255.255.255
static (inside,outside) tcp interface 3389 10.10.8.2 3389 netmask 255.255.255.255
static (inside,inside) 192.168.0.0 192.168.0.0 netmask 255.255.0.0
static (inside,inside) 10.10.8.0 10.10.8.0 netmask 255.255.255.0
access-group outside_access_in in interface outside
route outside 0.0.0.0 0.0.0.0 12.70.119.65 1
route inside 192.168.0.0 255.255.0.0 10.10.8.250 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
aaa authentication ssh console LOCAL
aaa authentication telnet console LOCAL
http server enable
http outside
http outside
http inside
http outside
http inside
http outside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
sysopt noproxyarp inside
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
crypto dynamic-map outside_dyn_map 20 set pfs
crypto dynamic-map outside_dyn_map 20 set transform-set ESP-3DES-SHA
crypto dynamic-map outside_dyn_map 40 set pfs
crypto dynamic-map outside_dyn_map 40 set transform-set ESP-3DES-SHA
crypto dynamic-map outside_dyn_map 60 set pfs
crypto dynamic-map outside_dyn_map 60 set transform-set ESP-3DES-SHA
crypto dynamic-map outside_dyn_map 80 set pfs
crypto dynamic-map outside_dyn_map 80 set transform-set ESP-3DES-SHA
crypto dynamic-map outside_dyn_map 100 set pfs
crypto dynamic-map outside_dyn_map 100 set transform-set ESP-3DES-SHA
crypto map outside_map 20 match address outside_20_cryptomap_1
crypto map outside_map 20 set pfs
crypto map outside_map 20 set peer 69.87.150.118
crypto map outside_map 20 set transform-set ESP-3DES-SHA ESP-3DES-MD5
crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map
crypto map outside_map interface outside
crypto isakmp enable outside
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash md5
group 2
lifetime 86400
crypto isakmp policy 30
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
crypto isakmp nat-traversal 30
telnet 10.10.8.0 255.255.255.0 inside
telnet timeout 5
ssh 63.161.207.0 255.255.255.0 outside
ssh timeout 5
console timeout 0
dhcpd dns 10.8.8.2
dhcpd address 10.10.8.150-10.10.8.200 inside
dhcpd dns 10.10.8.2 interface inside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
group-policy aaa internal
group-policy aaa attributes
dns-server value 10.10.8.2 4.2.2.2
vpn-tunnel-protocol IPSec
default-domain value domainname
group-policy bbb internal
group-policy bbb attributes
wins-server value 10.10.8.2
dns-server value 10.10.8.2
vpn-tunnel-protocol IPSec l2tp-ipsec
split-tunnel-policy tunnelall
split-tunnel-network-list value townoffice_splitTunnelAcl
default-domain value domainname.local
group-policy townremote internal
group-policy townremote attributes
wins-server value 10.10.8.2
dns-server value 10.10.8.2 4.2.2.2
vpn-tunnel-protocol IPSec
split-tunnel-policy tunnelspecified
split-tunnel-network-list value townremote_splitTunnelAcl
default-domain value domainanme
group-policy remote internal
group-policy remote attributes
wins-server value 10.10.8.2
dns-server value 10.10.8.2
vpn-tunnel-protocol IPSec
split-tunnel-policy tunnelspecified
split-tunnel-network-list value townremote_splitTunnelAcl
default-domain value dksecurity.local
address-pools value vpn
username xxxx password . encrypted privilege 15
username xxxx attributes
vpn-group-policy dksecurityremote
username xxx password encrypted privilege 15
username xxx attributes
vpn-group-policy dksecurityremote
username xxxx password . encrypted privilege 15
username xxx password encrypted privilege 15
username xxx attributes
vpn-group-policy dksecurityremote
username xxx password encrypted privilege 15
username xxxx attributes
vpn-group-policy dksecurityremote
username xxx password encrypted privilege 15
username xxx attributes
vpn-group-policy dksecurityremote
username xxx password encrypted privilege 15
username xxx attributes
vpn-group-policy dksecurityremote
username xxx password encrypted privilege 15
username xxx password encrypted privilege 15
username xxxx attributes
vpn-group-policy remote
username xxx password encrypted privilege 15
username xxx attributes
vpn-group-policy remote
username xxx password encrypted privilege 15
username xxx attributes
vpn-group-policy remote
username xxxx password encrypted privilege 15
username xxx password encrypted privilege 15
username xxx attributes
vpn-group-policy remote
tunnel-group 69.87.150.118 type ipsec-l2l
tunnel-group 69.87.150.118 ipsec-attributes
pre-shared-key *****
tunnel-group remote type remote-access
tunnel-group remote general-attributes
address-pool vpn
default-group-policy townremote
tunnel-group townremote ipsec-attributes
pre-shared-key *****
isakmp keepalive disable
tunnel-group townremote type remote-access
tunnel-group townremote general-attributes
address-pool vpn
default-group-policy townremote
tunnel-group lansingremote ipsec-attributes
pre-shared-key *****
class-map tcp-bypass
match access-list bypass
class-map test
match access-list new
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
no dns-guard
no protocol-enforcement
no nat-rewrite
policy-map global_policy
class test
class inspection_default
policy-map tcp
class tcp-bypass
set connection random-sequence-number disable
set connection advanced-options tcp-state-bypass
service-policy global_policy global
service-policy tcp interface inside
prompt hostname context
call-home reporting anonymous prompt 2
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:c724d6744097760d94a7dcc79c39568a
: endYou need to change the VPN pool ip subnet to something other than the same ip range used on the inside interface.
Sent from Cisco Technical Support iPad App -
WRT54GC - VPN connects but doesn't connect
I have a WRT54GC. When I use the Netgear ProSafe VP Client in order to connect to my clients network through his Netgear router. The Security Policy appears to be correctly set up because when I try to connect the Netgear client software indicates that I have successfully connected. Also.... on the other side of the connection, behind his Netgear router, the system administrator sees my local, non-routable IP as having connected.
Unfortunately that's as far as it goes because I can't connect with Remote Desktop and can't ping any of the computers on his network. It connects but doesn't allow me to do anything or see any of the computers on his network.
If I by-pass my router and connect directly to the Internet through my cable modem using the Netgear VPN client...everything works fine, evidently there is a problem which resides within the confines of my WRT54GC router.
Anyone have a clue as to what I should do?I already had those ports open Carrot but today I discovered another clue to my problem. I have two computers here, one with Windows 2003 and the other with XP. For somereason I was able to get it to work witht he XP machine whereas the Windows 2003 machine won't work. As I said a connection IS being made, proof that the ports are opened, I just can't do anything even though both sides of the connection seem to indicate that a connection has been made. I can't ping any computers on the other side of the connection or use Remote Desktop.
My quess is that there is something in the configuration of my Windows 2003 Server machine that is causing the problem. What that might be I don't know.
Message Edited by jessebalk on 11-22-200606:53 PM -
VPN connects but does not function when resuming from sleep
THe VPN on my ibook works fine - it connects and the data goes through. but when i put it to sleep (lid close/power->sleep) and than wake it up VPN connects fine and that's all. data stucks. i disconnect it - all works, pings go and so on. i connect it again, it connects, and pings stop, tracerouting stops and that's it. any ideas?
Whatever you are connected to thinks you are disconnected by the sound of it, or it is confused about the current session and is not allowing traffic. Something in the "sign off" settings on the other may be misconfigured.
You might want to post what you are connecting to (business network, etc). PPTP? L2TP? -
ASA5520 AnyConnect SSL VPN Connected but unable to ping my inside LAN
Hi there, please forgive if I have missed any forum protocols as this is my first post.
I am trying to configure Anyconnect SSL VPN. I am able to connect to the VPN on a laptop, witch is able to download the anyconnect client from the ASA. I am unable to ping any of my IP's that are on the inside of my ASA. Before posting here I have spent many hours on forums and watching videos on anyconnect SSL VPN creation and I am following it to the T but still no ping. Any help would be very much appreciated.
Inside 192.168.1.254/24
Outside dhcp
VPN Pool 192.168.250.1-50/24
Inside LAN 192.168.1.0/24
: Saved
ASA Version 8.4(4)1
interface GigabitEthernet0/0
nameif outside
security-level 0
ip address dhcp setroute
interface GigabitEthernet0/1
nameif inside
security-level 99
ip address 192.168.1.254 255.255.255.0
interface GigabitEthernet0/2
shutdown
no nameif
no security-level
no ip address
interface GigabitEthernet0/3
shutdown
no nameif
no security-level
no ip address
interface Management0/0
nameif management
security-level 99
ip address 192.168.100.1 255.255.255.0
ftp mode passive
dns server-group DefaultDNS
domain-name dock.local
same-security-traffic permit inter-interface
object network inside-network-object
subnet 192.168.1.0 255.255.255.0
object network management-network-object
subnet 192.168.100.0 255.255.255.0
object network NETWORK_OBJ_192.168.250.0_25
subnet 192.168.250.0 255.255.255.128
object-group network AllInside-networks
network-object object inside-network-object
network-object object management-network-object
access-list inside_access_in extended permit ip any any
access-list outside_access_in extended permit icmp any any echo-reply
access-list split_tunnel standard permit 192.168.1.0 255.255.255.0
access-list split_tunnel standard permit 192.168.100.0 255.255.255.0
pager lines 24
logging enable
logging asdm informational
mtu outside 1500
mtu inside 1500
mtu management 1500
ip local pool vpn_pool 192.168.250.1-192.168.250.100 mask 255.255.255.0
no failover
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-647.bin
no asdm history enable
arp timeout 14400
nat (inside,outside) source dynamic AllInside-networks interface
nat (inside,any) source static any any destination static NETWORK_OBJ_192.168.250.0_25 NETWORK_OBJ_192.168.250.0_25 no-proxy-arp route-lookup
access-group outside_access_in in interface outside
access-group inside_access_in in interface inside
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
user-identity default-domain LOCAL
http server enable 4433
http 192.168.100.0 255.255.255.0 management
http 192.168.1.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
telnet timeout 5
ssh 192.168.1.0 255.255.255.0 inside
ssh 192.168.100.0 255.255.255.0 management
ssh timeout 5
ssh key-exchange group dh-group1-sha1
console timeout 0
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
ssl encryption rc4-sha1 aes128-sha1 aes256-sha1 3des-sha1
webvpn
enable outside
anyconnect image disk0:/anyconnect-win-3.1.03103-k9.pkg 1
anyconnect enable
tunnel-group-list enable
group-policy GroupPolicy_anyconnect internal
group-policy GroupPolicy_anyconnect attributes
wins-server none
dns-server value 8.8.8.8
vpn-tunnel-protocol ssl-client ssl-clientless
split-tunnel-policy tunnelall
split-tunnel-network-list value split_tunnel
default-domain value dock.local
username test password JAasdf434ey521ZCT encrypted privilege 15
tunnel-group anyconnect type remote-access
tunnel-group anyconnect general-attributes
address-pool vpn_pool
default-group-policy GroupPolicy_anyconnect
tunnel-group anyconnect webvpn-attributes
group-alias anyconnect enable
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
call-home
profile CiscoTAC-1
no active
destination address http
https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email
[email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:24bcba3c4124ab371297d52260135924
: end :: Saved
ASA Version 8.4(4)1
interface GigabitEthernet0/0
nameif outside
security-level 0
ip address dhcp setroute
interface GigabitEthernet0/1
nameif inside
security-level 99
ip address 192.168.1.254 255.255.255.0
interface GigabitEthernet0/2
shutdown
no nameif
no security-level
no ip address
interface GigabitEthernet0/3
shutdown
no nameif
no security-level
no ip address
interface Management0/0
nameif management
security-level 99
ip address 192.168.100.1 255.255.255.0
ftp mode passive
dns server-group DefaultDNS
domain-name dock.local
same-security-traffic permit inter-interface
object network inside-network-object
subnet 192.168.1.0 255.255.255.0
object network management-network-object
subnet 192.168.100.0 255.255.255.0
object network NETWORK_OBJ_192.168.250.0_25
subnet 192.168.250.0 255.255.255.0
object-group network AllInside-networks
network-object object inside-network-object
network-object object management-network-object
access-list inside_access_in extended permit ip any any
access-list outside_access_in extended permit icmp any any echo-reply
access-list split_tunnel standard permit 192.168.1.0 255.255.255.0
access-list split_tunnel standard permit 192.168.100.0 255.255.255.0
pager lines 24
logging enable
logging asdm informational
mtu outside 1500
mtu inside 1500
mtu management 1500
ip local pool Anyconnect-pool 192.168.250.1-192.168.250.100 mask 255.255.255.0
no failover
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-647.bin
no asdm history enable
arp timeout 14400
nat (inside,outside) source dynamic AllInside-networks interface
nat (inside,outside) source static inside-network-object inside-network-object destination static NETWORK_OBJ_192.168.250.0_25 NETWORK_OBJ_192.168.250.0_25
nat (inside,outside) source static management-network-object management-network-object destination static NETWORK_OBJ_192.168.250.0_25 NETWORK_OBJ_192.168.250.0_25
access-group outside_access_in in interface outside
access-group inside_access_in in interface inside
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
user-identity default-domain LOCAL
http server enable
http 192.168.100.2 255.255.255.255 management
http 192.168.100.0 255.255.255.0 management
http 192.168.1.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
telnet timeout 5
ssh 192.168.1.0 255.255.255.0 inside
ssh 192.168.100.0 255.255.255.0 management
ssh timeout 5
ssh key-exchange group dh-group1-sha1
console timeout 0
management-access inside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
ssl encryption rc4-sha1 aes128-sha1 aes256-sha1 3des-sha1
webvpn
enable outside
anyconnect image disk0:/anyconnect-win-3.1.03103-k9.pkg 1
anyconnect enable
tunnel-group-list enable
group-policy GroupPolicy_Anyconnect_VPN internal
group-policy GroupPolicy_Anyconnect_VPN attributes
wins-server none
dns-server value 8.8.8.8
vpn-tunnel-protocol ssl-client
split-tunnel-policy tunnelall
split-tunnel-network-list value split_tunnel
default-domain value dock.local
username sander password f/J.5nLef/EqyPfy encrypted
username aveha password JA8X3IiqPvFFsZCT encrypted privilege 15
tunnel-group Anyconnect_VPN type remote-access
tunnel-group Anyconnect_VPN general-attributes
address-pool Anyconnect-pool
default-group-policy GroupPolicy_Anyconnect_VPN
tunnel-group Anyconnect_VPN webvpn-attributes
group-alias Anyconnect_VPN enable
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
call-home
profile CiscoTAC-1
no active
destination address http
https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email
[email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:4636fa566ffc11b0f7858b760d974dee
: end: -
Cisco asa- vpn established but cant ping
I am using 2 cisco asa 5505 routers, i have established vpn between them but i cant ping client internal or outside interface, client can ping my outside interface. Only configuration on client is basic easy vpn settings and interfaces, here is server part configuration on my side:
ASA Version 9.1(1)
hostname ciscoasa
enable password NuLKvvWGg.x9HEKO encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
interface Vlan1
nameif inside
security-level 100
ip address 10.1.2.1 255.255.255.0
interface Vlan2
nameif outside
security-level 0
pppoe client vpdn group iskon
ip address pppoe setroute
ftp mode passive
object network obj_any
subnet 0.0.0.0 0.0.0.0
object network inside
subnet 10.1.2.0 255.255.255.0
object network outside
subnet 10.1.3.0 255.255.255.0
object-group protocol DM_INLINE_PROTOCOL_1
protocol-object ip
protocol-object icmp
protocol-object udp
protocol-object tcp
object-group protocol DM_INLINE_PROTOCOL_2
protocol-object ip
protocol-object icmp
protocol-object udp
protocol-object tcp
access-list 101 extended permit object-group DM_INLINE_PROTOCOL_1 10.1.2.0 255.255.255.0 10.1.3.0 255.255.255.0
access-list 102 extended permit object-group DM_INLINE_PROTOCOL_2 10.1.3.0 255.255.255.0 10.1.2.0 255.255.255.0
access-list global_access extended permit ip any any
pager lines 24
logging enable
logging asdm informational
mtu inside 1500
mtu outside 1500
icmp unreachable rate-limit 1 burst-size 1
icmp permit 10.1.3.0 255.255.255.0 echo-reply inside
icmp permit any inside
icmp permit any outside
icmp permit 10.1.3.0 255.255.255.0 echo-reply outside
no asdm history enable
arp timeout 14400
no arp permit-nonconnected
nat (any,any) source static outside outside destination static inside inside no-proxy-arp
object network obj_any
nat (inside,outside) dynamic interface
access-group global_access global
route inside 0.0.0.0 0.0.0.0 10.1.3.1 tunneled
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
user-identity default-domain LOCAL
http server enable
http 10.1.2.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
crypto ipsec ikev1 transform-set mySET esp-3des esp-md5-hmac
crypto ipsec security-association pmtu-aging infinite
crypto dynamic-map DYN-MAP 5 set ikev1 transform-set mySET
crypto map MAP 60 ipsec-isakmp dynamic DYN-MAP
crypto map MAP interface outside
crypto ca trustpool policy
crypto ikev1 enable outside
crypto ikev1 policy 1
authentication pre-share
encryption des
hash md5
group 2
lifetime 86400
crypto ikev1 policy 65535
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
telnet timeout 5
ssh timeout 5
console timeout 0
management-access inside
vpdn group iskon request dialout pppoe
vpdn group iskon localname *********
vpdn group iskon ppp authentication pap
vpdn username ***** password *****
dhcpd auto_config outside
dhcpd address 10.1.2.5-10.1.2.132 inside
dhcpd enable inside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
group-policy VPN internal
group-policy VPN attributes
split-tunnel-policy tunnelall
split-tunnel-network-list value 101
nem enable
username user password enq05bKrudsJMMBu encrypted privilege 15
username user attributes
vpn-group-policy VPN
vpn-session-timeout none
group-lock value VPN-TUNNEL
tunnel-group VPN-TUNNEL type remote-access
tunnel-group VPN-TUNNEL general-attributes
default-group-policy VPN
tunnel-group VPN-TUNNEL ipsec-attributes
ikev1 pre-shared-key *****
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
inspect icmp
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
Cryptochecksum:3f2923b78a04ee8cfe9324e3e2733d78SOLVED!!! i just needed to configure nat here is configuration for any1 with same problem
: Saved
ASA Version 9.1(1)
hostname ciscoasa
enable password NuLKvvWGg.x9HEKO encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
interface Vlan1
nameif inside
security-level 100
ip address 10.1.2.1 255.255.255.0
interface Vlan2
nameif outside
security-level 0
pppoe client vpdn group iskon
ip address pppoe setroute
ftp mode passive
object network obj_any
subnet 0.0.0.0 0.0.0.0
object network ladimirevci
subnet 10.1.2.0 255.255.255.0
object network lekenik
subnet 10.1.3.0 255.255.255.0
access-list 101 extended permit ip 10.1.2.0 255.255.255.0 10.1.3.0 255.255.255.0
access-list 101 extended permit ip object lekenik object ladimirevci
access-list 101 extended permit ip object ladimirevci object lekenik
access-list outside_access_in extended permit ip object ladimirevci object lekenik
access-list outside_access_in extended permit ip object lekenik object ladimirevci
access-list outside_access_in extended permit ip any any
access-list inside_access_in extended permit ip object ladimirevci object lekenik
access-list inside_access_in extended permit ip object lekenik object ladimirevci
access-list inside_access_in extended permit ip any any
access-list nonat extended permit ip 10.1.2.0 255.255.255.0 10.1.3.0 255.255.255.0
access-list 102 extended permit ip 10.1.3.0 255.255.255.0 10.1.2.0 255.255.255.0
access-list global_access extended permit ip object lekenik object ladimirevci
access-list global_access extended permit ip object ladimirevci object lekenik
access-list global_access extended permit ip any any
pager lines 24
logging enable
logging buffered debugging
logging asdm informational
mtu inside 1500
mtu outside 1500
icmp unreachable rate-limit 1 burst-size 1
icmp permit any inside
icmp permit any echo-reply outside
asdm image disk0:/asdm-712.bin
no asdm history enable
arp timeout 14400
no arp permit-nonconnected
nat (any,any) source static ladimirevci ladimirevci destination static lekenik lekenik
object network obj_any
nat (inside,outside) dynamic interface dns
access-group inside_access_in in interface inside
access-group outside_access_in in interface outside
access-group global_access global
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
user-identity default-domain LOCAL
http server enable
http 0.0.0.0 0.0.0.0 inside
http 10.1.2.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
no sysopt connection permit-vpn
crypto ipsec ikev1 transform-set mySET esp-3des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec security-association pmtu-aging infinite
crypto dynamic-map DYN-MAP 5 set pfs
crypto dynamic-map DYN-MAP 5 set ikev1 transform-set mySET
crypto dynamic-map DYN-MAP 5 set reverse-route
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set reverse-route
crypto map MAP 60 ipsec-isakmp dynamic DYN-MAP
crypto map MAP interface outside
crypto map inside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map inside_map interface inside
crypto ca trustpool policy
crypto ikev1 enable inside
crypto ikev1 enable outside
crypto ikev1 policy 1
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 65535
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
telnet 0.0.0.0 0.0.0.0 inside
telnet timeout 5
ssh scopy enable
ssh 0.0.0.0 0.0.0.0 inside
ssh timeout 60
console timeout 0
management-access inside
vpdn group iskon request dialout pppoe
vpdn group iskon localname vivaindo@iskon-dsl
vpdn group iskon ppp authentication pap
vpdn username vivaindo@iskon-dsl password *****
dhcpd auto_config outside
dhcpd address 10.1.2.5-10.1.2.36 inside
dhcpd enable inside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
ssl encryption rc4-md5 rc4-sha1 aes128-sha1 aes256-sha1 3des-sha1
group-policy DfltGrpPolicy attributes
vpn-tunnel-protocol ikev2 ssl-clientless
group-policy VPN internal
group-policy VPN attributes
vpn-tunnel-protocol ikev1 l2tp-ipsec
group-lock value VPN-TUNNEL
split-tunnel-policy tunnelspecified
split-tunnel-network-list value 101
nem enable
username user password enq05bKrudsJMMBu encrypted privilege 15
username user attributes
vpn-group-policy VPN
group-lock value VPN-TUNNEL
tunnel-group VPN-TUNNEL type remote-access
tunnel-group VPN-TUNNEL general-attributes
default-group-policy VPN
tunnel-group VPN-TUNNEL ipsec-attributes
ikev1 pre-shared-key *****
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
inspect icmp
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
Cryptochecksum:ddac35422ebbf57095be7a1d33b0b67d
: end
asdm image disk0:/asdm-712.bin
no asdm history enable -
ASA 5505 IPSEC VPN connected but can't access to LAN
ASA : 8.2.5
ASDM: 6.4.5
LAN: 10.1.0.0/22
VPN Pool: 172.16.10.0/24
Hi, we purcahsed a new ASA 5505 and try to setup IPSEC VPN via ASDM; i just simply run the Wizards, setup vpnpool, split tunnelling,etc.
I can connect to the ASA by using cisco VPN client and internet works fine on the local PC, but it cannot access to the LAN (can't ping. can't remote desktop). I tried the same thing on our Production ASA(those have both Remote VPN and Site-to-site VPN working), the new profile i created worked fine.
Below is my configure, do I mis-configure anything?
ASA Version 8.2(5)
hostname asatest
domain-name XXX.com
enable password 8Fw1QFqthX2n4uD3 encrypted
passwd g9NiG6oUPjkYrHNt encrypted
names
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
interface Vlan1
nameif inside
security-level 100
ip address 10.1.1.253 255.255.252.0
interface Vlan2
nameif outside
security-level 0
ip address XXX.XXX.XXX.XXX 255.255.255.240
ftp mode passive
clock timezone PST -8
clock summer-time PDT recurring
dns server-group DefaultDNS
domain-name vff.com
access-list vpntest_splitTunnelAcl standard permit 10.1.0.0 255.255.252.0
access-list inside_nat0_outbound extended permit ip 10.1.0.0 255.255.252.0 172.16.10.0 255.255.255.0
pager lines 24
logging enable
logging timestamp
logging trap warnings
logging asdm informational
logging device-id hostname
logging host inside 10.1.1.230
mtu inside 1500
mtu outside 1500
ip local pool vpnpool 172.16.10.1-172.16.10.254 mask 255.255.255.0
no failover
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 0 access-list inside_nat0_outbound
nat (inside) 1 0.0.0.0 0.0.0.0
route outside 0.0.0.0 0.0.0.0 XXX.XXX.XXX.XXX 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
aaa-server AD protocol nt
aaa-server AD (inside) host 10.1.1.108
nt-auth-domain-controller 10.1.1.108
http server enable
http 10.1.0.0 255.255.252.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs group1
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map outside_map interface outside
crypto isakmp enable outside
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
telnet timeout 5
ssh 10.1.0.0 255.255.252.0 inside
ssh timeout 20
console timeout 0
dhcpd auto_config outside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
group-policy vpntest internal
group-policy vpntest attributes
wins-server value 10.1.1.108
dns-server value 10.1.1.108
vpn-tunnel-protocol IPSec l2tp-ipsec
password-storage disable
ip-comp disable
re-xauth disable
pfs disable
ipsec-udp disable
ipsec-udp-port 10000
split-tunnel-policy tunnelspecified
split-tunnel-network-list value vpntest_splitTunnelAcl
default-domain value XXX.com
split-tunnel-all-dns disable
backup-servers keep-client-config
address-pools value vpnpool
username admin password WeiepwREwT66BhE9 encrypted privilege 15
username user5 password yIWniWfceAUz1sUb encrypted privilege 5
username user3 password umNHhJnO7McrLxNQ encrypted privilege 3
tunnel-group vpntest type remote-access
tunnel-group vpntest general-attributes
address-pool vpnpool
authentication-server-group AD
authentication-server-group (inside) AD
default-group-policy vpntest
strip-realm
tunnel-group vpntest ipsec-attributes
pre-shared-key BEKey123456
peer-id-validate nocheck
privilege cmd level 3 mode exec command perfmon
privilege cmd level 3 mode exec command ping
privilege cmd level 3 mode exec command who
privilege cmd level 3 mode exec command logging
privilege cmd level 3 mode exec command failover
privilege cmd level 3 mode exec command packet-tracer
privilege show level 5 mode exec command import
privilege show level 5 mode exec command running-config
privilege show level 3 mode exec command reload
privilege show level 3 mode exec command mode
privilege show level 3 mode exec command firewall
privilege show level 3 mode exec command asp
privilege show level 3 mode exec command cpu
privilege show level 3 mode exec command interface
privilege show level 3 mode exec command clock
privilege show level 3 mode exec command dns-hosts
privilege show level 3 mode exec command access-list
privilege show level 3 mode exec command logging
privilege show level 3 mode exec command vlan
privilege show level 3 mode exec command ip
privilege show level 3 mode exec command ipv6
privilege show level 3 mode exec command failover
privilege show level 3 mode exec command asdm
privilege show level 3 mode exec command arp
privilege show level 3 mode exec command route
privilege show level 3 mode exec command ospf
privilege show level 3 mode exec command aaa-server
privilege show level 3 mode exec command aaa
privilege show level 3 mode exec command eigrp
privilege show level 3 mode exec command crypto
privilege show level 3 mode exec command vpn-sessiondb
privilege show level 3 mode exec command ssh
privilege show level 3 mode exec command dhcpd
privilege show level 3 mode exec command vpnclient
privilege show level 3 mode exec command vpn
privilege show level 3 mode exec command blocks
privilege show level 3 mode exec command wccp
privilege show level 3 mode exec command dynamic-filter
privilege show level 3 mode exec command webvpn
privilege show level 3 mode exec command module
privilege show level 3 mode exec command uauth
privilege show level 3 mode exec command compression
privilege show level 3 mode configure command interface
privilege show level 3 mode configure command clock
privilege show level 3 mode configure command access-list
privilege show level 3 mode configure command logging
privilege show level 3 mode configure command ip
privilege show level 3 mode configure command failover
privilege show level 5 mode configure command asdm
privilege show level 3 mode configure command arp
privilege show level 3 mode configure command route
privilege show level 3 mode configure command aaa-server
privilege show level 3 mode configure command aaa
privilege show level 3 mode configure command crypto
privilege show level 3 mode configure command ssh
privilege show level 3 mode configure command dhcpd
privilege show level 5 mode configure command privilege
privilege clear level 3 mode exec command dns-hosts
privilege clear level 3 mode exec command logging
privilege clear level 3 mode exec command arp
privilege clear level 3 mode exec command aaa-server
privilege clear level 3 mode exec command crypto
privilege clear level 3 mode exec command dynamic-filter
privilege cmd level 3 mode configure command failover
privilege clear level 3 mode configure command logging
privilege clear level 3 mode configure command arp
privilege clear level 3 mode configure command crypto
privilege clear level 3 mode configure command aaa-server
prompt hostname context
no call-home reporting anonymous
Cryptochecksum:447bbbc60fc01e9f83b32b1e0304c6b4
: endI change a Machine's gateway to this ASA and capture again, now we can see some reply.
All ohter PCs and switches gateway are point to another ASA, maybe that's the reason why i didn't work?
what's the recommanded way to make our LAN to have two 2 gateways(for load balance or backup router, etc)?
add two gateways to all PCs and swtichwes?
1: 18:15:48.307875 802.1Q vlan#1 P0 172.16.10.1.137 > 10.1.1.108.137: udp 68
2: 18:15:49.777685 802.1Q vlan#1 P0 172.16.10.1.137 > 10.1.1.108.137: udp 68
3: 18:15:51.377147 802.1Q vlan#1 P0 172.16.10.1.137 > 10.1.1.108.137: udp 68
4: 18:15:57.445777 802.1Q vlan#1 P0 172.16.10.1.137 > 10.1.1.108.137: udp 68
5: 18:15:58.856324 802.1Q vlan#1 P0 172.16.10.1.137 > 10.1.1.108.137: udp 68
6: 18:16:00.395090 802.1Q vlan#1 P0 172.16.10.1.137 > 10.1.1.108.137: udp 68
7: 18:16:06.483464 802.1Q vlan#1 P0 172.16.10.1.137 > 10.1.1.108.137: udp 68
8: 18:16:08.082805 802.1Q vlan#1 P0 172.16.10.1.137 > 10.1.1.108.137: udp 68
9: 18:16:09.542406 802.1Q vlan#1 P0 172.16.10.1.137 > 10.1.1.108.137: udp 68
10: 18:16:20.640424 802.1Q vlan#1 P0 172.16.10.1 > 10.1.1.230: icmp: echo request
11: 18:16:20.642193 802.1Q vlan#1 P0 10.1.1.230 > 172.16.10.1: icmp: echo reply
12: 18:16:21.169607 802.1Q vlan#1 P0 172.16.10.1 > 10.1.1.230: icmp: echo request
13: 18:16:21.171210 802.1Q vlan#1 P0 10.1.1.230 > 172.16.10.1: icmp: echo reply
14: 18:16:22.179556 802.1Q vlan#1 P0 172.16.10.1 > 10.1.1.230: icmp: echo request
15: 18:16:22.181142 802.1Q vlan#1 P0 10.1.1.230 > 172.16.10.1: icmp: echo reply
16: 18:16:23.237673 802.1Q vlan#1 P0 172.16.10.1 > 10.1.1.230: icmp: echo request
17: 18:16:23.239291 802.1Q vlan#1 P0 10.1.1.230 > 172.16.10.1: icmp: echo reply
18: 18:16:27.676402 802.1Q vlan#1 P0 172.16.10.1.137 > 10.1.1.108.137: udp 50
19: 18:16:29.246935 802.1Q vlan#1 P0 172.16.10.1.137 > 10.1.1.108.137: udp 50
20: 18:16:30.676921 802.1Q vlan#1 P0 172.16.10.1.137 > 10.1.1.108.137: udp 50
21: 18:16:49.539660 802.1Q vlan#1 P0 172.16.10.1 > 10.1.1.233: icmp: echo request
22: 18:16:54.952602 802.1Q vlan#1 P0 172.16.10.1 > 10.1.1.233: icmp: echo request
23: 18:17:04.511463 802.1Q vlan#1 P0 172.16.10.1 > 10.1.1.233: icmp: echo request -
Remote Access VPN connecting but not passing traffic
I have a remote access VPN configured on a device here. I'm able to connect a device and it assigns me an IP address out of the pool, and injects the routes to its local network, but I'm not able to pass any traffic through the VPN and none of the IPSec SA counters increment for the dial-in connection. I've compared the config here to the samples from documentation and I don't know what I'm missing. Config is below.
3118-FWL001(config)# sho run
: Saved
ASA Version 7.2(3)
hostname 3118-FWL001
domain-name rr-rentals.com
enable password hEgvNHfNHV8zypPu encrypted
names
interface Vlan1
nameif inside
security-level 100
ip address 192.168.10.1 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address 199.X.X.162 255.255.255.248
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
passwd 2KFQnbNIdI.2KYOU encrypted
banner exec
banner exec
banner exec
banner exec Any attempted or unauthorized access, use, or modification is prohibited.
banner exec Unauthorized users may face criminal and/or civil penalties.
banner exec The use of this system may be monitored and recorded.
banner exec If the monitoring reveals possible evidence of criminal activity, Adhost can
banner exec provide the records to law enforcement.
banner exec Be safe! Do not share your access information with anyone!
banner exec
banner exec
banner exec
banner asdm
banner asdm
banner asdm
banner asdm Any attempted or unauthorized access, use, or modification is prohibited.
banner asdm Unauthorized users may face criminal and/or civil penalties.
banner asdm The use of this system may be monitored and recorded.
banner asdm If the monitoring reveals possible evidence of criminal activity, Adhost can
banner asdm provide the records to law enforcement.
banner asdm Be safe! Do not share your access information with anyone!
banner asdm
banner asdm
banner asdm
ftp mode passive
dns server-group DefaultDNS
domain-name rr-rentals.com
same-security-traffic permit inter-interface
same-security-traffic permit intra-interface
access-list outside_acl extended permit ip any host 199.X.X.163
access-list outside_acl extended permit icmp any any echo
access-list outside_acl extended permit icmp any any echo-reply
access-list outside_acl extended permit tcp 216.X.X.64 255.255.255.192 any
access-list outside_acl extended permit tcp host 76.X.X.166 any eq 3389
access-list outside_acl extended permit tcp 67.X.X.192 255.255.255.224 any eq 3389
access-list outside_acl extended permit tcp any any eq ftp
access-list outside_acl extended permit tcp any any eq ftp-data
access-list outside_acl extended permit tcp host 72.X.X.71 any eq 3389
access-list outside_acl extended permit tcp host 26.X.X.155 any eq 3389
access-list outside_acl extended permit tcp host 24.X.X.155 any eq 3389
access-list outside_acl extended permit icmp any any unreachable
access-list outside_acl extended permit icmp any any time-exceeded
access-list outside_acl extended permit tcp host 71.X.X.170 any eq 3389
access-list outside_acl extended permit tcp host 24.X.X.200 any eq 3389
access-list inside_nat0_outbound extended permit ip 192.168.10.0 255.255.255.0 192.168.1.0 255.255.255.0
access-list inside_nat0_outbound extended permit ip 192.168.10.0 255.255.255.0 192.168.2.0 255.255.255.0
access-list inside_nat0_outbound extended permit ip 192.168.10.0 255.255.255.0 192.168.4.0 255.255.255.0
access-list inside_nat0_outbound extended permit ip 192.168.10.0 255.255.255.0 192.168.3.0 255.255.255.0
access-list inside_nat0_outbound extended permit ip 192.168.10.0 255.255.255.0 192.168.20.0 255.255.255.0
access-list inside_nat0_outbound extended permit ip 192.168.1.0 255.255.255.0 192.168.20.0 255.255.255.0
access-list inside_nat0_outbound extended permit ip 192.168.20.0 255.255.255.0 192.168.1.0 255.255.255.0
access-list inside_nat0_outbound extended permit ip 192.168.20.0 255.255.255.0 192.168.10.0 255.255.255.0
access-list outside_1_cryptomap extended permit ip 192.168.10.0 255.255.255.0 192.168.1.0 255.255.255.0
access-list outside_1_cryptomap extended permit ip 192.168.20.0 255.255.255.0 192.168.1.0 255.255.255.0
access-list outside_2_cryptomap extended permit ip 192.168.10.0 255.255.255.0 192.168.2.0 255.255.255.0
access-list outside_4_cryptomap extended permit ip 192.168.10.0 255.255.255.0 192.168.4.0 255.255.255.0
access-list outside_3_cryptomap extended permit ip 192.168.10.0 255.255.255.0 192.168.3.0 255.255.255.0
access-list rr-vpn_splitTunnelAcl standard permit 192.168.10.0 255.255.255.0
access-list rr-vpn_splitTunnelAcl standard permit 192.168.1.0 255.255.255.0
pager lines 24
logging enable
logging buffer-size 1048576
logging buffered debugging
logging asdm informational
mtu inside 1500
mtu outside 1500
ip local pool vpnpool 192.168.20.1-192.168.20.254 mask 255.255.255.0
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-523.bin
no asdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 0 access-list inside_nat0_outbound
nat (inside) 1 0.0.0.0 0.0.0.0
static (inside,outside) 199.X.X.163 192.168.10.2 netmask 255.255.255.255
access-group outside_acl in interface outside
route outside 0.0.0.0 0.0.0.0 199.X.X.161 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout uauth 0:05:00 absolute
aaa authentication ssh console LOCAL
aaa authentication http console LOCAL
aaa authentication enable console LOCAL
aaa authentication serial console LOCAL
http server enable
http 192.168.1.0 255.255.255.0 inside
http 216.X.X.64 255.255.255.192 outside
http 0.0.0.0 0.0.0.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
sysopt connection tcpmss 1200
crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto dynamic-map outside_dyn_map 20 set pfs
crypto dynamic-map outside_dyn_map 20 set transform-set ESP-3DES-SHA
crypto map outside_map 1 match address outside_1_cryptomap
crypto map outside_map 1 set pfs
crypto map outside_map 1 set peer 50.X.X.58
crypto map outside_map 1 set transform-set ESP-AES-128-SHA
crypto map outside_map 2 match address outside_2_cryptomap
crypto map outside_map 2 set pfs
crypto map outside_map 2 set peer 75.X.X.253
crypto map outside_map 2 set transform-set ESP-AES-128-SHA
crypto map outside_map 3 match address outside_3_cryptomap
crypto map outside_map 3 set pfs
crypto map outside_map 3 set peer 173.X.X.69
crypto map outside_map 3 set transform-set ESP-AES-128-SHA
crypto map outside_map 4 match address outside_4_cryptomap
crypto map outside_map 4 set pfs
crypto map outside_map 4 set peer 70.X.X.194
crypto map outside_map 4 set transform-set ESP-AES-128-SHA
crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map
crypto map outside_map interface outside
crypto isakmp enable outside
crypto isakmp policy 10
authentication pre-share
encryption aes
hash sha
group 5
lifetime 86400
crypto isakmp policy 30
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
telnet timeout 5
ssh 192.168.10.2 255.255.255.255 inside
ssh 192.168.0.0 255.255.0.0 inside
ssh 216.X.X.64 255.255.255.192 outside
ssh 50.X.X.58 255.255.255.255 outside
ssh timeout 60
ssh version 2
console timeout 0
management-access inside
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect icmp
inspect icmp error
service-policy global_policy global
tftp-server outside 216.X.X.116 3118-FWL001.config
group-policy rr-vpn internal
group-policy rr-vpn attributes
dns-server value 216.X.X.12 66.X.X.11
vpn-tunnel-protocol IPSec
split-tunnel-policy tunnelspecified
split-tunnel-network-list value rr-vpn_splitTunnelAcl
username rrlee password B6rKS8LmKC50oIXK encrypted privilege 0
username rrlee attributes
vpn-group-policy rr-vpn
username cschirado password QYICGrOFAZ9iPWpp encrypted privilege 0
username cschirado attributes
vpn-group-policy rr-vpn
username daniel password SZsXZCSuVXcFn9NB encrypted privilege 15
username adhostadm password 7P2Y2Ow1o0.VSjvh encrypted privilege 15
username troy password amZKsxVU.8N9kKPb encrypted privilege 0
username troy attributes
vpn-group-policy rr-vpn
username troyr password Hek9zbMrM6wEDSfi encrypted privilege 15
username druiz password 33oau7XOcvhJ3DMv encrypted privilege 0
username druiz attributes
vpn-group-policy rr-vpn
username theresa password qWsPnR.vfjXzlunC encrypted privilege 0
username theresa attributes
vpn-group-policy rr-vpn
username kevin password R5DPfUVhzGCEg6pu encrypted privilege 0
username kevin attributes
vpn-group-policy rr-vpn
username andrea password MyhIPdH6UJQDon77 encrypted privilege 0
username andrea attributes
vpn-group-policy rr-vpn
tunnel-group 50.X.X.58 type ipsec-l2l
tunnel-group 50.X.X.58 ipsec-attributes
pre-shared-key *
tunnel-group 75.X.X.253 type ipsec-l2l
tunnel-group 75.X.X.253 ipsec-attributes
pre-shared-key *
tunnel-group 72.X.X.71 type ipsec-l2l
tunnel-group 72.X.X.71 ipsec-attributes
pre-shared-key *
tunnel-group 173.X.X.69 type ipsec-l2l
tunnel-group 173.X.X.69 ipsec-attributes
pre-shared-key *
tunnel-group rr-vpn type ipsec-ra
tunnel-group rr-vpn general-attributes
address-pool vpnpool
default-group-policy rr-vpn
tunnel-group rr-vpn ipsec-attributes
pre-shared-key *
tunnel-group 70.X.X.194 type ipsec-l2l
tunnel-group 70.X.X.194 ipsec-attributes
pre-shared-key *
prompt hostname contextHere are the results of the commands you requested. I'm not able to ping either direction.
Thanks,
James
3118-FWL001# sho cry isa sa
Active SA: 5
Rekey SA: 0 (A tunnel will report 1 Active and 1 Rekey SA during rekey)
Total IKE SA: 5
1 IKE Peer: 50.34.254.58
Type : L2L Role : responder
Rekey : no State : MM_ACTIVE
2 IKE Peer: 173.10.71.69
Type : L2L Role : responder
Rekey : no State : MM_ACTIVE
3 IKE Peer: 75.151.109.253
Type : L2L Role : initiator
Rekey : no State : MM_ACTIVE
4 IKE Peer: 70.99.88.194
Type : L2L Role : initiator
Rekey : no State : MM_ACTIVE
5 IKE Peer: 216.211.143.85
Type : user Role : responder
Rekey : no State : AM_ACTIVE
3118-FWL001# sho cry ips sa
interface: outside
Crypto map tag: outside_dyn_map, seq num: 20, local addr: 199.21.66.162
local ident (addr/mask/prot/port): (0.0.0.0/0.0.0.0/0/0)
remote ident (addr/mask/prot/port): (192.168.20.2/255.255.255.255/0/0)
current_peer: 216.211.143.85, username: kevin
dynamic allocated peer ip: 192.168.20.2
#pkts encaps: 0, #pkts encrypt: 0, #pkts digest: 0
#pkts decaps: 0, #pkts decrypt: 0, #pkts verify: 0
#pkts compressed: 0, #pkts decompressed: 0
#pkts not compressed: 0, #pkts comp failed: 0, #pkts decomp failed: 0
#pre-frag successes: 0, #pre-frag failures: 0, #fragments created: 0
#PMTUs sent: 0, #PMTUs rcvd: 0, #decapsulated frgs needing reassembly: 0
#send errors: 0, #recv errors: 0
local crypto endpt.: 199.21.66.162, remote crypto endpt.: 216.211.143.85
path mtu 1500, ipsec overhead 58, media mtu 1500
current outbound spi: CBF94621
inbound esp sas:
spi: 0x8D8279CA (2374138314)
transform: esp-3des esp-sha-hmac none
in use settings ={RA, Tunnel, }
slot: 0, conn_id: 200, crypto-map: outside_dyn_map
sa timing: remaining key lifetime (sec): 28715
IV size: 8 bytes
replay detection support: Y
outbound esp sas:
spi: 0xCBF94621 (3422111265)
transform: esp-3des esp-sha-hmac none
in use settings ={RA, Tunnel, }
slot: 0, conn_id: 200, crypto-map: outside_dyn_map
sa timing: remaining key lifetime (sec): 28715
IV size: 8 bytes
replay detection support: Y
Crypto map tag: outside_map, seq num: 1, local addr: 199.21.66.162
access-list outside_1_cryptomap permit ip 192.168.10.0 255.255.255.0 192.168.1.0 255.255.255.0
local ident (addr/mask/prot/port): (192.168.10.0/255.255.255.0/0/0)
remote ident (addr/mask/prot/port): (192.168.1.0/255.255.255.0/0/0)
current_peer: 50.34.254.58
#pkts encaps: 15356573, #pkts encrypt: 15356573, #pkts digest: 15356573
#pkts decaps: 9021115, #pkts decrypt: 9021114, #pkts verify: 9021114
#pkts compressed: 0, #pkts decompressed: 0
#pkts not compressed: 15356573, #pkts comp failed: 0, #pkts decomp failed: 0
#pre-frag successes: 0, #pre-frag failures: 0, #fragments created: 0
#PMTUs sent: 0, #PMTUs rcvd: 0, #decapsulated frgs needing reassembly: 0
#send errors: 0, #recv errors: 0
local crypto endpt.: 199.21.66.162, remote crypto endpt.: 50.34.254.58
path mtu 1500, ipsec overhead 74, media mtu 1500
current outbound spi: FE16571B
inbound esp sas:
spi: 0x78BD7E4F (2025684559)
transform: esp-aes esp-sha-hmac none
in use settings ={L2L, Tunnel, PFS Group 2, }
slot: 0, conn_id: 86, crypto-map: outside_map
sa timing: remaining key lifetime (kB/sec): (4263158/5788)
IV size: 16 bytes
replay detection support: Y
outbound esp sas:
spi: 0xFE16571B (4262876955)
transform: esp-aes esp-sha-hmac none
in use settings ={L2L, Tunnel, PFS Group 2, }
slot: 0, conn_id: 86, crypto-map: outside_map
sa timing: remaining key lifetime (kB/sec): (4064653/5788)
IV size: 16 bytes
replay detection support: Y
Crypto map tag: outside_map, seq num: 4, local addr: 199.21.66.162
access-list outside_4_cryptomap permit ip 192.168.10.0 255.255.255.0 192.168.4.0 255.255.255.0
local ident (addr/mask/prot/port): (192.168.10.0/255.255.255.0/0/0)
remote ident (addr/mask/prot/port): (192.168.4.0/255.255.255.0/0/0)
current_peer: 70.99.88.194
#pkts encaps: 491814, #pkts encrypt: 491814, #pkts digest: 491814
#pkts decaps: 416810, #pkts decrypt: 416810, #pkts verify: 416810
#pkts compressed: 0, #pkts decompressed: 0
#pkts not compressed: 491814, #pkts comp failed: 0, #pkts decomp failed: 0
#pre-frag successes: 0, #pre-frag failures: 0, #fragments created: 0
#PMTUs sent: 0, #PMTUs rcvd: 0, #decapsulated frgs needing reassembly: 0
#send errors: 0, #recv errors: 0
local crypto endpt.: 199.21.66.162, remote crypto endpt.: 70.99.88.194
path mtu 1500, ipsec overhead 74, media mtu 1500
current outbound spi: 533F55E1
inbound esp sas:
spi: 0xE2F461AD (3807666605)
transform: esp-aes esp-sha-hmac none
in use settings ={L2L, Tunnel, PFS Group 2, }
slot: 0, conn_id: 194, crypto-map: outside_map
sa timing: remaining key lifetime (kB/sec): (4273818/27167)
IV size: 16 bytes
replay detection support: Y
outbound esp sas:
spi: 0x533F55E1 (1396659681)
transform: esp-aes esp-sha-hmac none
in use settings ={L2L, Tunnel, PFS Group 2, }
slot: 0, conn_id: 194, crypto-map: outside_map
sa timing: remaining key lifetime (kB/sec): (4266133/27167)
IV size: 16 bytes
replay detection support: Y
Crypto map tag: outside_map, seq num: 2, local addr: 199.21.66.162
access-list outside_2_cryptomap permit ip 192.168.10.0 255.255.255.0 192.168.2.0 255.255.255.0
local ident (addr/mask/prot/port): (192.168.10.0/255.255.255.0/0/0)
remote ident (addr/mask/prot/port): (192.168.2.0/255.255.255.0/0/0)
current_peer: 75.151.109.253
#pkts encaps: 207718, #pkts encrypt: 207718, #pkts digest: 207718
#pkts decaps: 142739, #pkts decrypt: 142739, #pkts verify: 142739
#pkts compressed: 0, #pkts decompressed: 0
#pkts not compressed: 207722, #pkts comp failed: 0, #pkts decomp failed: 0
#pre-frag successes: 0, #pre-frag failures: 0, #fragments created: 0
#PMTUs sent: 0, #PMTUs rcvd: 0, #decapsulated frgs needing reassembly: 0
#send errors: 0, #recv errors: 0
local crypto endpt.: 199.21.66.162, remote crypto endpt.: 75.151.109.253
path mtu 1500, ipsec overhead 74, media mtu 1500
current outbound spi: 8D74AC18
inbound esp sas:
spi: 0x0CF7F70B (217577227)
transform: esp-aes esp-sha-hmac none
in use settings ={L2L, Tunnel, PFS Group 2, }
slot: 0, conn_id: 195, crypto-map: outside_map
sa timing: remaining key lifetime (kB/sec): (4274490/23242)
IV size: 16 bytes
replay detection support: Y
outbound esp sas:
spi: 0x8D74AC18 (2373233688)
transform: esp-aes esp-sha-hmac none
in use settings ={L2L, Tunnel, PFS Group 2, }
slot: 0, conn_id: 195, crypto-map: outside_map
sa timing: remaining key lifetime (kB/sec): (4270718/23242)
IV size: 16 bytes
replay detection support: Y
Crypto map tag: outside_map, seq num: 3, local addr: 199.21.66.162
access-list outside_3_cryptomap permit ip 192.168.10.0 255.255.255.0 192.168.3.0 255.255.255.0
local ident (addr/mask/prot/port): (192.168.10.0/255.255.255.0/0/0)
remote ident (addr/mask/prot/port): (192.168.3.0/255.255.255.0/0/0)
current_peer: 173.10.71.69
#pkts encaps: 3427935, #pkts encrypt: 3427935, #pkts digest: 3427935
#pkts decaps: 2006044, #pkts decrypt: 2006044, #pkts verify: 2006044
#pkts compressed: 0, #pkts decompressed: 0
#pkts not compressed: 3427935, #pkts comp failed: 0, #pkts decomp failed: 0
#pre-frag successes: 0, #pre-frag failures: 0, #fragments created: 0
#PMTUs sent: 0, #PMTUs rcvd: 0, #decapsulated frgs needing reassembly: 0
#send errors: 0, #recv errors: 0
local crypto endpt.: 199.21.66.162, remote crypto endpt.: 173.10.71.69
path mtu 1500, ipsec overhead 74, media mtu 1500
current outbound spi: 2E8A6147
inbound esp sas:
spi: 0x467968AB (1182361771)
transform: esp-aes esp-sha-hmac none
in use settings ={L2L, Tunnel, PFS Group 2, }
slot: 0, conn_id: 154, crypto-map: outside_map
sa timing: remaining key lifetime (kB/sec): (4270213/18597)
IV size: 16 bytes
replay detection support: Y
outbound esp sas:
spi: 0x2E8A6147 (780820807)
transform: esp-aes esp-sha-hmac none
in use settings ={L2L, Tunnel, PFS Group 2, }
slot: 0, conn_id: 154, crypto-map: outside_map
sa timing: remaining key lifetime (kB/sec): (4162093/18597)
IV size: 16 bytes
replay detection support: Y
3118-FWL001# sho run route
route outside 0.0.0.0 0.0.0.0 199.21.66.161 1 -
VPN Connects but unable to access internal devices
Thank you in advance for any assistance that can be provided.
I am using AnyConnect to create a VPN with an ASA 5505. Once connected, the client needs to access a device behind a 1941 router.
Internally, (not using VPN), all my routing is working correctly. My VPN client can connect and when I put a route on my 1941 router, I am able to ping that particular device. But my VPN client cannot appear to ping anything else, either the devices on the same internal range as the ASA 5505 or anything past the 1941.
VPN Client ASA 5505 Workstation 1941 Router Far Device
192.168.201.20 -----> Outside IP x.x.x.x // Internal 192.168.101.1 192.168.101.56 192.168.101.2 // 192.168.8.1 192.168.8.150
Client connects and get IP from ASA
Cannot ping this Cannot ping this
Can ping internal IP of 1941
*(after creating a static route)
I have been playing around with my configuration extensively to try and make this work. Split-tunneling is enabled and is required.
Here is my current config:
hostnameMYHOST
enable password mUUvr2NINofYuSh2 encrypted
passwd UNDrnIuGV0tAPtz2 encrypted
names
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
switchport access vlan 7
interface Vlan1
nameif inside
security-level 100
ip address 192.168.101.1 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address x.x.x.x 255.255.0.0
interface Vlan7
no forward interface Vlan1
nameif DMZ
security-level 20
ip address 137.57.183.1 255.255.255.0
ftp mode passive
clock timezone MST -7
dns domain-lookup outside
object-group network obj_any_dmz
access-list nonat extended permit ip 192.168.101.0 255.255.255.0 any
access-list nonat extended permit ip 192.168.201.0 255.255.255.0 any
access-list split-tunneling standard permit 192.168.101.0 255.255.255.0
pager lines 24
logging enable
logging buffered debugging
logging asdm informational
mtu inside 1500
mtu outside 1500
mtu DMZ 1500
ip local pool Internal_Range 192.168.101.125-192.168.101.130 mask 255.255.255.0
ip local pool vpn_pool 192.168.201.20-192.168.201.30 mask 255.255.255.0
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
global (outside) 10 interface
nat (inside) 0 access-list nonat
nat (inside) 1 0.0.0.0 0.0.0.0
nat (DMZ) 10 137.57.183.0 255.255.255.0
route outside 0.0.0.0 0.0.0.0 x.x.x.x 1
route inside 192.168.8.0 255.255.255.0 192.168.101.2 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
aaa authentication ssh console LOCAL
http server enable 64000
http 0.0.0.0 0.0.0.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
crypto ca trustpoint ASDM_TrustPoint1
enrollment self
subject-name CN=MYHOST
keypair ClientX_cert
crl configure
crypto ca certificate chain ASDM_TrustPoint1
certificate 0f817951
308201e7 30820150 a0030201 0202040f 81795130 0d06092a 864886f7 0d010105
05003038 31173015 06035504 03130e41 494d452d 56504e2d 42415455 53311d30
1b06092a 864886f7 0d010902 160e4149 4d452d56 504e2d42 41545553 301e170d
31333036 32373137 32393335 5a170d32 33303632 35313732 3933355a 30383117
30150603 55040313 0e41494d 452d5650 4e2d4241 54555331 1d301b06 092a8648
86f70d01 0902160e 41494d45 2d56504e 2d424154 55533081 9f300d06 092a8648
86f70d01 01010500 03818d00 30818902 818100c9 ff840bf4 cfb8d394 2c940430
1887f25a 49038aa0 1299cf10 bda2a436 227dcdbf f1c5566b c35c2f19 8b3514d3
4e24f5b1 c8840e8c 60e2b39d bdc0082f 08cce525 97ffefba d42bb087 81b9adb9
db0a8b2f b643e651 d17cd6f8 f67297f2 d785ef46 c3acbb39 615e1ef1 23db072c
783fe112 acd6dc80 dc38e94b 6e56fe94 d59d5d02 03010001 300d0609 2a864886
f70d0101 05050003 8181007e 29e90ea0 e337976e 9006bc02 402fd58a a1d30fe8
b2c1ab49 a1828ee0 488d1d2f 1dc5d150 3ed85f09 54f099b2 064cd622 dc3d3821
fca46c69 62231fd2 6e396cd1 7ef586f9 f41205af c2199174 3c5ee887 42b684c9
7f4d2045 4742adb5 d70c3805 4ad13191 8d802bbc b2bcd8c7 8eec111b 761d89f3
63ebd49d 30dd06f4 e0fa25
quit
crypto isakmp enable outside
crypto isakmp policy 40
authentication pre-share
encryption aes-256
hash sha
group 5
lifetime 86400
telnet timeout 5
ssh 0.0.0.0 0.0.0.0 inside
ssh 0.0.0.0 0.0.0.0 DMZ
ssh timeout 10
console timeout 0
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
ssl encryption rc4-md5 rc4-sha1 aes128-sha1 aes256-sha1 3des-sha1
ssl trust-point ASDM_TrustPoint1 outside
webvpn
enable outside
svc image disk0:/anyconnect-win-2.4.1012-k9.pkg 1
svc enable
group-policy ClientX_access internal
group-policy ClientX_access attributes
dns-server value 4.2.2.2
vpn-tunnel-protocol svc
split-tunnel-policy tunnelspecified
split-tunnel-network-list value split-tunneling
default-domain value access.local
address-pools value vpn_pool
ipv6-address-pools none
webvpn
svc mtu 1406
svc rekey time none
svc rekey method ssl
username ClientX password ykAxQ227nzontdIh encrypted privilege 15
username ClientX attributes
vpn-group-policy ClientX_access
service-type admin
tunnel-group ClientX type remote-access
tunnel-group ClientX general-attributes
address-pool Internal_Range
default-group-policy ClientX_access
tunnel-group SSLClientProfile type remote-access
tunnel-group SSLClientProfile general-attributes
default-group-policy ClientX_access
tunnel-group ClientX_access type remote-access
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
Cryptochecksum:da38065247f7334a5408b7ada3af29ae
: endok, lets go on ... ;-)
Split-Tunneling: The ACL must include all networks you want to reach through the VPN:
access-list split-tunneling standard permit 192.168.101.0 255.255.255.0
access-list split-tunneling standard permit 192.168.8.0 255.255.255.0
NAT: Don't use "any" in the nat-exemption, but specify all traffic that should not be natted:
access-list nonat extended permit ip 192.168.101.0 255.255.255.0 192.168.201.0 255.255.255.0
access-list nonat extended permit ip 192.168.8.0 255.255.255.0 192.168.201.0 255.255.255.0
Routing: The 1941 needs a route for the vpn-pool pointing to the ASA (just in case there is no default route to the ASA)
Don't stop after you've improved your network! Improve the world by lending money to the working poor:
http://www.kiva.org/invitedby/karsteni -
Can't connect but can ping & use AP Util
A couple issues:
TC shows up in finder, can ping it (static ip, as are all my ip's) and use the airport utility. It worked fine for a day or so, now with no changes, this is where I'm at. I get an error about it not existing. I've tried to 'connect As' even 'connect to server' in Finder trying names and ip - no joy.
TC is set up with only Ethernet (cable) WiFi is turned off. File sharing with accounts (all are OK) My MacBook Pro and Mini can't connect.
I find it odd that the Air Port utility connects to it just fine. Does it use the AFP or UDP/TCP?
I'm going to reboot the TC and see. But if I need to reboot it every day or so, its worthless to me.
Topology (another issue) is:
router/switch Gb --> switch 2 100b ---> TC
When I tried to make the TC be the middle (to keep a Gb network) it didn't work. (yes, I know about the uplink ports; even tried the standard ports)
(oh other kinda non issue: Printers don't show up in the AirPort utility, but remote 'puters print fine)
Message was edited by: MudSharkThis TC is going back. What a POS! Now it won't even connect to the LAN. Had it for less then a week and its been down more then up. NOT impressed.
-
VPN Connected but can not see folders / server
I have established a connection between an OSX server and client but now can not see the server or any services on the client. There are no servers listed in the 'Network' section of finder and using 'Connect to server' I can not see it either. The log on the server shows the connection and the client does as well but other than that I can not do anything with the connection.
Details
- Using 10.6 osx server and a 10.6 client.
- Connected via VPN, L2TP
Thanks,
BrianI have connected to VPN but can't see anything on my finder or desktop.
I tried connecting to server by doing command+K and entered the ip address like afp://ipaddress/user
doesn't work. I get error message saying:
Connection Failed
The server "165.124.164.125" is available on your computer. Access the volumes and files locally.
help!! -
Losing internet connection but can ping severs
Hi. Something weird has been happening with my powerbook the last month. Safari, mail and skype cant access the internet suddenly. Rebooting my router does nothing, neither does logging out/in, but rebooting the pb resolves. When this happens I can still ping www addresses and ip addresses but all apps seem to lose connectivity. Anyone got a suggestion?
This resolved itself. Maybe it was a problem with my ISP
Maybe you are looking for
-
Client Authentication error while invoking portal web service.
Hi All, I have created a java portal web service from portal service using NWDS, I am getting client authentication error while invoking the service. Please tell me where to enter client authenticity details. regards Santosh
-
ITunes 10.5 upgrade 32 bit can no longer edit album information
Since upgrading to the latest version of itunes I can no longer edit any of the CD info. When I open the Get Info for an individual track or entire CD all fields with content are grayed. I'm in the Music view, not a Playlist and not the iPod list. I'
-
Dead Power Inverter on MacBook
Hello everyone, this is my first post. I am 22, stationed in Osan, South Korea with the USAF. Anyway, before I left the states my MacBook display stopped workin, initially I thought it was because it suffered a short slow descent to the ground when i
-
BAdi or user exit after PR Creation
HI All, We need a BADI or user exit which will trigger after the Purchase Requisition is Created and the PR no. is saved into the data base. I need to do some modifications based on the PR No. Waiting for your response. Amarnath
-
Hi, I am trying to draw an image to the screen. Here is my code: public void paintArrowButtonForeground(SynthContext context, Graphics g, int x, int y, int w, int h, int direction) { if (direction == SwingUtilities.SOUTH) {