VPN disconnect after 1 minute with INTEL 10.4.5 to SERVER 10.4.6?

any clue?

I've had simliar issues with VPN dropping connections, not exactly the same set up. However, always resolved by dropping the MTU size in advanced Ethernet set up on the client to custom at 1303. If it still doesn't work try this on your server too.

Similar Messages

VPN Disconnection After iPhone Locks

I'm not sure if anyone else has this issue, but a fix/explanation would be helpful.
Whenever I am on a VPN connection [with 3G as it seems EDGE doesn't want to let me connect another issue entirely] - it disconnects after about a few minutes of being locked. Part of me thinks this has to do with the issues with 3G where it switches unnecessarily.
Hopefully one of you who uses VPN experiences this as well and can help me out!
Thanks kindly,
Chris

Thanks for your post, I have the same problem, but when I asked IT about this, they told me that we authenticate users in a different way.
You wrote: "*The fix was to configure the Cisco firewall VPN user account to allow the client to save the password locally, you must goto the user account and un-check the "inherit" and then the option of "NO" or "YES" can be selected*"
I'm not from IT, but they told me we are using a Cisco ASA 5520 and using user validation by Radius authentication against Active Directory and IAS (Internet authentication Service)
That we don't handle user authentication by Cisco, so there is no way to tell Cisco to allow the users to store the passwords. What Cisco validates is a Group and then passes the rest to the AD.
Any suggestion?

Wireless disconnect after login with Remote desktop with wpa2

We have 5508 wireless controller with 1142 aironet acess points.... we configured Radius authentication on ACS 5.3 for wireless users
when we take remote desktop connection of wireless client ... it disconnects after 10 sec.
and when we logged in to client ... connectivity was lossed .. I have to reconnect Manually to client..
It's really frustrating for all our service engineers to work remotly ....... Please Help

Hi Santosh,
which vesrion of sw u r running on WLC ?
Open Caveats on 7.4.100.0, CSCuc78713 could be related to this;
CSCuc78713
Symptom: Wireless client cannot receive broadcast packets after broadcast key rotation.
Conditions: Dynamic WEP; 7.0.235.0, 7.2.110.0, and 7.3.101.0 controller software releases.
Workaround:
• Executes the config advanced eap bcast-key-interval 86400 in the middle of the night
• Change security setting to WPA2, and so on.
Regards

Cisco VPN disconnects after a minute or so

I can access the internet with my verizon dsl but I'm having problems accessing my work network via cisco vpn software. I can connect for a minute or two and then it kicks me off. I'm pretty sure its something with verizon because I can hop on the free wifi and connect with the vpn no problems
Thanks

One thing that was updated recently was the antivirus software was migrated from something to Symantec Endpoint Protection.
I have a feeling you may have to contact your tech support at work to see if they have to set a parameter to their Symantec software. Either that or when they made the upgrade it may have disabled your dsl connection if yours was set up to access our network by havin g the computer supply the user name and password.
When you used to go online did you have to select a connect button on the computer?
Another thing you may try is, select Start> run and type CMD
now type.... ping yahoo.com ......and see if you get a response. If you get a response this way, something in the software is blocking your connection

T400 won't resume from standby after tampering with Intel ME functions

Hello,
I have a Lenovo T400 with XP SP3. Standby had always been working fine, but yesterday I disabled the Intel ME and AMT functions in the BIOS and also disabled the Intel AMT services in Windows.
When I pressed the power button this morning, I heard the hard disk spinning up, but the standby indicator stayed lit and the display did not activate. I had to force a power off to regain control.
The first suspect is the Active Management Technology, because I haven't installed anything particular that may interfere with power management. At the moment, I haven't had time to try and roll back the changes I've made, but I'm asking if anbody knows about similar issues or has an explanation ready, before I start doing things that may compound the problem.
Thank you,
/_urka
Solved!
Go to Solution.

Resetting the security chip, as suggested in another thread by tobes78, fixed the issue.
My T400 has been working correctly for some days now.
Before resetting the security chip, I tried all the following without result, but some updates may be required for the fix to work:
-updating BIOS
-updating ACPI drivers and PM software
-disabling Intel ME and AMT
I've left Intel ME/AMT disabled, because I don't really need it and I dare not try enabling it again.
However, it is not sure if the issue was caused by a firmware or a hardware defect and if that may cause other problems in the future.
Bye,
/_urka
Message Edited by Lurka on 02-10-2009 02:11 PM

SQL Developer on Linux hangs when disconnecting after VPN reconnect

Hello,
I have a problem with using connections after general link failure (Cisco VPN disconnect in my case, lost of route to Oracle DB).
When I reconnect to a VPN and I'll try to disconnect from a previously opened (before general link failure) connection, I need
to wait more than 10 minutes to complete this process. SQL Developer is completely unusable during this time.
Steps to reproduce:
1. Connect to VPN
2. Open connection in SQL Developer to host accessible only by this VPN
3. Restart VPN
4. Try to do anything with this connection (disconnect, execute sql in opened SQL Worksheet, view tables, etc.)
This bug is not new in recent versions, I'm using SQL Developer from over 2 years and this bug was always with me. But if I remember correctly in earlier versions (<3.0) I couldn't reuse the connection to execute sql (hanging SQL Developer for more than 10 minutes) but disconnecting would succeed without a problem.
Maybe SQL Developer should move connection management to separate thread to resolve this issue... or is there another solution?
I'm using SQL Developer 3.1.07.42 @ Linux 3.0.4
For VPN connectivity I use vpnc
When I restart VPN connection I'm loosing TUN interface and all routes.
I have tested this issue on a few versions of SQL Developer on Windows XP, including 3.1.07. There is no problem with disconnecting after vpn failure on Windows.
Maybe I should fill some bug report? When I can do such thing? Metalink?
Best regards,
Irek Slonina

Hi Irek,
Possibly you can resolve this issue by altering the type of the connection that becomes non-responsive upon a VPN reconnect. What type are you currently using: Basic, TNS, etc?
In this forum thread (for Windows, unfortunately, not Linux), although different from your case, the solution used Thick/OCI driver, not Thin/Basic:
Windows 7 VPN
I have no VPN client on Linux (much less vpnc), only Cisco AnyConnect on Win XP, so I cannot test your scenario.
Regards,
Gary
SQL Developer Team

Windows 8 L2TP VPN disconnects at 60 minutes

I have 5 windows 8 machines across various domains all configured with 8-10 L2TP VPN setups to various clients networks. Most of them are to Sonicwall firewalls but a couple are to other firewalls. My Windows 8 machines consists of both upgrades
from Windows 7 and fresh installs. Either way every one of my L2TP connections will disconnect at 60 minute increment, regardless of activity or inactivity, which never happened on Windows 7. I have looked everywhere on the Sonicwalls (all of them
are on the most up to date firmware) and there is no setting for disconnecting after 60 minutes.
The issue must be with Windows 8 - just looking for a registry hack or hotfix that will fix this problem.
Michael E. Wheeler

I also have the same problem but my timeout happens at 49 mins 54 seconds everytime. I recently switched to Windows 8 and I am facing lots of issues with the VPN.
Initially I had installed the VPN version "CISCO VPN 5.0.07.0290-k9" and my VPN would disconnect every 3 to 4 mins. Then later browsed to get the "most compatible" version of VPN "5.0.07.0440-k9" . Now also the same problem perisists. but a small improvement.
Incase I am keeping my access to the Server IP active, working on the sever and not on the local system, then my connection is active for a longer time. If I work on my local system the connection disconnects within a minute.
Since I had to work on my local system also, I did a continuous ping on the Command Prompt and then I can now work on my Server thro VPN and also on my local system for 49 mins. I was searching for a solution when I stumbled on this chain. I am not alone,
but could not find a solution. I hope someone from Microsoft looks at this thread and give a Fix build.
Please post any alternative solution to bypass this issue.
Regards
Kiruthiga Kuppuswamy

I can't be the only one with this issue. MacBook Pro Retina Late-2013 WiFi disconnects after waking up from sleep.

Did anyone buy a MacBook Pro Retina 13" from Best Buy this Black Friday?
I'm having an issue where the WiFi disconnects after the MacBook wakes from sleep but only after a couple of minutes.
Once the WiFi disconnects, I can't reconnect to the same network and sometimes it won't find nearby networks.
I have to turn off the WiFi and wait for at least 5 seconds before turning it back on for it to auto-reconnect to my home network.
If I wait less than 5 seconds, it will continue to attempt connection to the home network but won't connect.
I've tried reformatting and deleting my network configurations as well as resetting my modem, power cycling it, etc.
I am using 2Wire Gateway modem/router from AT&T on b/g network.
I've tried connecting to a friend's network under Time Warner Cable and the same issue occurs.
I exchanged the MacBook at a Best Buy for a brand unopened one (I hope) and the same exact thing happens with this new one.
Really, I can't be the only one with this issue. Unless in a 0.00001% chance I received two defective units in a row?
Please.. does anyone have a clue why this is happening?

You're definitely not the only one. I have the same issue. I spent 6 hours over multiple days on the phone with Apple support trying a variety of things (some of which are mentioned above), and none of them worked. They finally sent me a replacement laptop. I made sure to try it periodicaly as I was moving files and installing applications to see if I ran into it again and things seemed okay at first but now I am running into the same issue and it is terribly annoying. I've got 5 other devices that connect to the same router and I've never had this issue with any of them.
My router is a Linksys E2000. I haven't tried changing the router channel but I have tried to cnnecting to other networks in the building I live in and I have run into the same issue there.

Constant disconnect after 9 minutes

My boyfriend lives in Australia and I'm in the US - we Skype every day but it's extremely difficult
It disconnects every 8:50-9 minutes exactly during every call. A few times at 3 minutes or 6 minutes exactly. Sometimes when we call each other we cant hear each other at all and have to try again until it works - it can go on for 4-5 tries in a row. I don't know if this is Skype or a network error. It happens to us on Facebook video chat too after the same amount of time and the same issue with the occasional no audio.
My connections are fine but he's on mobile so I don't know if its his network cutting in and out or what but regardless I'd really like some help so that we can screenshare and watch DVDs together
Help is much appreciated!!

The behavior you describe isn't normal, snc. iMovie shouldn't interrupt the import at 9 minutes. There should be no pause to "convert" to DV. That's not typical of iMovie.
The entire video should import to iMovie direct to DV files inside the Media folder, starting a new file every 9+ minutes. That's the 2GB file-size limit for iMovie clips. There should be no pause. Importing should continue until the end of the video.
That said, it's possible there's a tape flaw that is confusing iMovie. A short break in the video at 9 minutes — where you stopped shooting, advanced the tape a bit, then started taping — would cause what you describe. Or, I suppose, a tape defect. Or even, I suppose, a dirty play head that's created an imperfect recording.
Some things to try:
• Try using a head-cleaning tape.
• Try recording longer than 11 minutes with a different tape, and import that. If the problem goes away, the problem is with the other tape.
• Is the project on an external disk? Make sure the disk the project resides on uses the Mac OS Extended disk format. If it's not, iMovie may be having problems saving to disk, causing the strange pause you see.
My guess is the problem will go away with a new tape.
Karl

My VPN keeps disconnecting after downloaded iOS 8. How do I fix this?

my VPN keeps disconnecting after I have downloaded iOS 8 on my iPad. Why is this happening? How can I fix it?

I am having similar issues. IPad mini ios 8.0.2. VPN connection will drop unexpectedly. Actually, it drops coincide with an active application that uses a lot of memory. Such as a web browser. I can 100% replicate behavior by connecting VPN, going to Safari, and opening Facebook. If I don't use an app that is memory-intensive, VPN stays connected indefinitely.

Wifi disconnects after about a minute after i am no longer using my computer . Why is this happening?

After logging into my wifi connection, which does take some time to do.
Why does my wifi disconnect after not using my computer for a few minutes?
I am on osx lion 10.7.5

Computer entering sleep mode after few minutes?

GPU in after effects cs6 on mac mountain lion with Intel HD 4000

Is its possible to enable GPU in after effects cs6 on mac mountain lion with Intel HD 4000?

No, OpenGL Swap Buffer support (Level 1) support for the HP4000 is for Windows only. Level 2 and 3 support is not available either. You'd need a more powerful NVIDIA card for Level 1, 2, and 3 feature support.
More info here: http://helpx.adobe.com/after-effects/using/rendering-opengl.html#main-pars_header_3

Arch freezes after about 10 minutes with new kernel [SOLVED]

As the title says: Arch freezes after about 10 minutes with new kernel (2.6.27). I can only move a mouse, but everything else is frozen. Even restarting X doesn't do a trick. It doesn't work at all. Frozen.
I don't get any kind of error message (oh really?), so what's the problem..?
Last edited by Exitium (2008-10-22 15:29:27)

juan_sck wrote:
Exitium wrote:
test1000 wrote:I had an issue with only being able to move the mouse after logging in from gdm and nothing happening but i don't know if thats the same error Sooo, are you using the right nvidia drivers? their driverpolicy just changed, and we now have 4 different official nvidia drivers in repo :S
Yeah... I'm using nvidia... So the problem is nvidia drivers, not the Linux kernel?
Edit: My card is nVidia GeForce 8800 Ultra. I can't get driver information now, because I'm using WinXP right now. I'll check it later.
Did you make a new install or just updated?
You can try to reinstall old kernel with:
pacman -U /var/cache/pacman/pkg/kernel(version you want).pkg.tar.gz
if you made a new install you may have to install the xorg keyboard driver and so.
By the way, there are a few diferent packages for nvidia drivers. Check wich is yours.
Also check /var/log/ folder for errors.
Updated kernel.
And as I said, I'll check the driver later.

I purchased snow leopard and got a disk with OSX 10.6.3 but my macbook with intel processor and 1 gig won't update. It restarts but doesn't update after disk installs

I purchased snow leopard from online macstore in Australia and got a disk with OSX 10.6.3 but my macbook with intel processor and 1 gig won't update from 10.5.8. It restarts but doesn't update after disk installs. Do I need 10.6.0 to install first?

Insert the Snow Leopard DVD, restart your MacBook while holding down the C key, this should start your Mac from the optical drive instead of your hard drive. Choose your language and install Snow Leopard. When it's done and you've restarted on your new 10.6.3 system run software update to upgrade to 10.6.8. Done.

Wireless modem disconnecting after 10 minutes consecutively...

My wireless modem is disconnecting after every 10 minutes...I just replaced the modem and cable so it is not that.
It shows as a Ethernet port connection...it is plugged into a USB port.
Help

Interesting. I have a Macbook pro 17" and although all is fine using either of the 2 usb ports on the left, my external modem is either very slow or disconnects for no reason when I use the usb port on the right.
I think it may have occurred after I upgraded to 10.4.7 also.

VPN disconnect after 1 minute with INTEL 10.4.5 to SERVER 10.4.6?

Similar Messages

Maybe you are looking for