VPN doesn't work after updating to Yosemite?

I just updated to Yosemite, and have had a few issues. I had an issue with my Wi-Fi (I couldn't access any website), but resolved it after visiting an Apple help desk, but now my VPN gives me the same problem. I can connect to it, but I can't visit any websites with it on, what can I do? I've never had this problem before with Mavericks

1.Plug in and  remove the headphone.
    If you see red light in the headphone port, plug the headphone
    in and out of the port 5 or 6 times to flip the microswitch inside.
    Sound output may be stuck in the digital mode.
    Try this even if you don’t see the red light.
2. Reset PRAM.  http://support.apple.com/kb/PH14222
    Do this twice
3. Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the  appropriate method.

Similar Messages

  • Sound doesn't work after updating to Yosemite.

    iTunes, sound effects (swoosh when mail is sent), videos on internet...no sound at all since updating to Yosemite. I press the volume key and get the symbol of a speaker with a circle crossed out beneath it. Not over it, but beneath it. I went into system preferences and sound, but don't really understand what might need to be done there or even if that's where the problem is.

    1.Plug in and  remove the headphone.
        If you see red light in the headphone port, plug the headphone
        in and out of the port 5 or 6 times to flip the microswitch inside.
        Sound output may be stuck in the digital mode.
        Try this even if you don’t see the red light.
    2. Reset PRAM.  http://support.apple.com/kb/PH14222
        Do this twice
    3. Reset SMC.     http://support.apple.com/kb/HT3964
        Choose the  appropriate method.

  • Screen saver doesn't work after updating to Yosemite

    When the screen saver should come on the screen remains black.
    The screen saver is set to turn on after 3 minutes; Energy Saver is set to turn the display off after 15 minutes.
    When testing the screen saver from System Preferences, the screen saver works.
    When trying to activate it with a hot corner or by leaving the computer inactive, it does not work/the screen remains black.
    It does this no matter which screen saver is chosen.
    Is there something I'm missing? Thank you for your help.

    I updated two different Mac to "YO" last week and neither encountered an issue. Screen savers are unchanged. However, there are other reports here of screensaver issues. Some have turned out to be caused by unneeded third-party utilities. Are you running any anti-virus programs, or programs that claim to "clean, optimize, or tune up" you Mac?

  • Safari doesn't work after updated to Yosemite

    Hey everyone, I'm using MBA 2013 and just updated it to Yosemite a couple days ago. Then the safari performs quite wired, it works totally fine in other places but it just didn't work with my router. While my MBA can still use chrome and my iPhone works with the wifi. I tried reset my router, did the PRAM rest and also did some researches in this community but still haven't find any solution yet. Any suggestion? Thanks a lot.
    Nathan

    Safari has been horrible! I cannot believe it is 'Apple'. At first I thought it was my internet too, but ... it isn't. I've done some of the things suggested here (which I greatly appreciate!) but I'll do the additional ones I didn't already do.
    But, we shouldn't have to be doing all of this stuff to get the browser to work as expected. When I was using beta version, it (Safari) was much better! They need to fix/update this quickly. Meanwhile, if the all the fixes don't work ... will have to use Chrome.
    *Disappointed*.

  • My E-Mail Accounts Pop3 doesn´t work after update Lion

    My E-Mail Accounts Pop3 doesn´t work after update Lion.

    Same here,and Apple support did not have a solution!!

  • ZawgyiOne Font doesn't work after updating to iOS 7.1, please advice

    ZawgyiOne Font doesn't work after updating to iOS 7.1, please advice

    hi Mr.Sianpu
    nice to know you, my name Kiemtheng from Cambodia, i got a problem with Khmer Unicode font at my ipad which i just update from IOS 7.0.1 to ISO 7.1.1 , It not support with Khmer font which used to appear at the old version , the problem happen as the same Lian Tuang Question, and can you tell me how to fix this problem , hope to hear a good new from your, for khmer unicode font which support with Nokora and Battombong
    http://adkhmer.com/app/iphone/font_khmer_ios7_no_jailbreak/Nokora.mobileconfig
    https://docs.google.com/file/d/0B8798SqaxK-JS1B5T3hjNkJPQUE/edit?pli=1
    thanks

  • Scrubbing no longer works after updating to Yosemite

    After updating to Yosemite yesterday and restarting this morning, I've noticed several problems.  The biggest is that scrubbing in the timeline is very buggy, unresponsive, and sometimes doesn't work at all.  I've tried turning it off and on, restarting FCP and my mac to no avail.
    Also switching between tools via keyboard shortcuts and the playhead moving between edits have been sluggish as well.  Library is stored on a thunderbolt connected RAID
    FCP v 10.1.3    Yosemite v10.10   Mac Pro  Processor: 3.5GHz 6-Core Intel Xeon E5  Ram: 16GB   GPU:  AMD FirePro D500

    Permissions issues from the new account?
    My impression, from my own experience and paying attention to other users' issues, is that 10.1.3 running on 10.10 is generally the fastest, most stable combination since the application was first introduced. This weekend I did a full days work on a couple of unfamiliar systems, new iMacs with shared storage, over two dozen projects, and I encountered no glitches whatsoever.
    So that's why I was interested in your media drive and whether there might be something in your user account that the OS or FCP was struggling with.
    Here is a kind of check list that Richard Taylor compiled. Why not go through it to see whether you discover a remedy.
    Russ

  • I4 push mail doesn't work after update

    My I4 push mail doesn't work after iOS 5 update. I have a mobileme acct and the settings show mail set up for push. Any thoughts?

    Hello amishnik,
    Thank you for your question regarding email on your BlackBerry PlayBook tablet.
    Have you restarted the device and verified that the device is still connected to Wi-Fi? Are you able to browse the internet? If not, try this and let us know the results including any error messages.
    Cheers,
    -FB
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.
    Click "Accept as a Solution" for posts that have solved your issue(s)!

  • Netflix Streaming on MacMini does not work after update to Yosemite

    Netflix videos will no longer stream :
    I am using a MacMini (late 2012) with an HP w2207h display.  Intel processor 2.5 GHz Core !5  Intel  HD Graphics 4000 1024 MG  After updating to Yosemite, 10.10.1, I cannot stream videos from the Netflix site.
    All of the monitor specs. would indicate that streaming videos in HDCP would be possible.  Everything streamed very well until approximately 4 days ago.
    I have changed the display resolution to 1080p.  I have disconnected the monitor and reconnected it several times.  I have updated iTunes as well as Yosemite.

    Have you went to NetFlix's support site?

  • Touch id doesn't work after update ios 7.1 APPLE PLEASE HELP!!!

    Touch id scanner dead after update 7.1. Tried remove fingerprints but cannot add new fingerprint because the touch id scanner DEAD. Tried rebooting the device and touch id scanner still doesn't work. For somehow the scanner works when the iphone is charging even it works slower than before the ios 7.1 update. APPLE PLEASE FIX THIS!!!
    FYI : I am not going to try backup and restore my 5s, for the last time i bought this 5s i already tried for 2DAYS and cannot restore my old iphone 5 data to my new 5s!! I give up and lost all my DATA! Cannot find any answer from apple support. REALLY DISSAPOINTED WITH APPLE!

    https://discussions.apple.com/message/25162081#25162081

  • Home sharing doesn't work after updating itunes to 10.6.40

    Hi
    Just update my itunes to 10.6.40 and ipad1/iphone4 to 5.1.
    The home sharing doesn't appear after enable it and both remote app (ipad and iphone) don't work!
    Now, my ipad doesn't sync thru wifi and my iphone 4 sync thru wifi even when not charging.
    Please help
    Regards
    Pedro Silva

    Thanks! I didn't realise there was a specific forum for Home Sharing... found it now and will repost there.

  • Downloading new photos - iPhoto doesn't work after upgrading to Yosemite

    Hello,
    Since I upgraded to Yosemite, iPhoto has stooped working after downloading photos from my Sd card.
    Some picutres downloaded are black while some others are ok, but in any case I have to restart my iMac because every apps running can't be used anymore.
    That happens only with iPhoto, after downloading, instead normally it works.
    Now I use Aperture and everything is fine but I'd like to figure out why iPhoto acts like that.
    Do I have to trash it?
    Thank you.
    Fabrizio

    There have been a number of reports on here from folks with Raw issues after updating.
    This thread:
    RAW files suddenly show up as "not supported" (Aperture 3.5.1, OS X 10.10)
    explains how to delete and reinstall Raw support. It has worked for others.

  • Lightroom doesn't work after update to CC 2014

    After last update to CC 2014, Lightroom doesn't work for me. I use Windows 8.1

    kmvereb - Don't accuse me of lying, OK? It works fine with penderra's instruction.
    1. Close Adobe Creative Cloud completely.
    2. Empty the folder: C:\Program Files (x86)\Common Files\Adobe\SLCache
    3. Launch Lightroom - you should be asked to Sign in to Adobe CC.

  • Auto-lock doesn't work after updating iOS 6.

    I'm using iphone 4s. After updating iOS 6, the auto-lock function doesn't work anymore. I left it for 10 minutes and when i came back, the screen was still on although the auto-lock time is 2 minutes. I tested many times, tried to reboot but it didnt help. But the screen auto-lock is still working. Does anyone have problem like me and know how to fix it ?

    Are you using Assistive Touch?
    See this thread:
                                                                               Re: IOs 6: Auto Lock Bug iPhone 4S (Updated)                    

  • Widget doesn't work after updating to OSX 10.6.8

    After installing the latest batch of updates, my sudoku widget doesn't work anymore. Anyone else having a problem like this, or know how to fix it?
    I noticed on the website which created it that others are also having this problem in the last few days:
    http://briandeboer.com/posts/sudoku-20-approaching-beta-status/
    Thanks!

    Someone posted the following on the Sudoku widget website:
    "Just wanted to add to my previous post. This widget uses images “.png” files so the font issue has not affected it’s performance. After some digging I found WebKit2 was bundled with the latest Safari update (5.1 and 5.0.6). WebKit2 uses a whole bunch of new APIs rendering some old ones obsolete. My guess is as good as yours, but most likely the SudokuC controller inside the widget is referring to one of those obsolete APIs."
    Does anyone know what this means, and can explain it to someone, like myself, who is not a programmer?
    Also, does it seem like a relevant solution and/or cause of the problem?
    Thanks!

Maybe you are looking for