VPN drops after authentication

Looking at the logs is says IKE Failed. phase 5, assert 0 then gets disconnected.  my Cisco ACS server shows that my authentication is successful and the logs show the banner being displayed.  Any ideas where to start looking for this?  I have tried looking at Google to no avail.

More logs info.
>
�Sep  5 08:43:03 unknown CommCenter[15] <Notice>: Client [Preferences-CTTelephonyCenter] is telling PDP context 0 to go active.
Sep  5 08:43:03 unknown configd[14] <Notice>: network configuration changed.
Sep  5 08:43:03 unknown CommCenter[15] <Error>: kPdpContextStateChangeNotification kActive set last_auto_trigger_failed to false
Sep  5 08:43:03 unknown CommCenter[15] <Error>: _ReInitThrottleTimer(): Clearing throttle timer on context ID [0] at 368545383.978369
Sep  5 08:43:04 unknown configd[14] <Notice>: IPSec connecting to server x.x.x.x
Sep  5 08:43:04 unknown configd[14] <Notice>: IPSec Phase1 starting.
Sep  5 08:43:04 unknown configd[14] <Notice>: SCNC: start, triggered by Preferences, type IPSec, status 0
Sep  5 08:43:04 unknown racoon[657] <Notice>: IPSec connecting to server x.x.x.x
Sep  5 08:43:04 unknown racoon[657] <Notice>: IPSec Phase1 started (Initiated by me).
Sep  5 08:43:04 unknown kernel[0] <Debug>: launchd[657] Builtin profile: racoon (sandbox)
>
Sep  5 08:43:05 unknown racoon[657] <Notice>: IPSec Phase1 established (Initiated by me).
Sep  5 08:43:05 unknown racoon[657] <Notice>: IPSec Extended Authentication requested.
Sep  5 08:43:05 unknown configd[14] <Notice>: IPSec requesting Extended Authentication.
Sep  5 08:43:05 unknown searchd[658] <Warning>: Could not open updates file for com.apple.MobileSMS SMSSearch
Sep  5 08:43:05 unknown searchd[658] <Warning>: Something wrong with index com.apple.MobileSMS.SMSSearch, re-creating (index=0, tid=0, savedTid=0, version=1, savedVersion=0)
>
�Sep  5 08:43:25 unknown configd[14] <Notice>: IPSec sending Extended Authentication.
Sep  5 08:43:25 unknown racoon[657] <Notice>: IPSec Extended Authentication sent.
>
�Sep  5 08:43:28 unknown racoon[657] <Notice>: IPSec Extended Authentication Passed.
Sep  5 08:43:28 unknown racoon[657] <Notice>: IPSec Network Configuration requested.
Sep  5 08:43:28 unknown racoon[657] <Notice>: IPSec Network Configuration established.
Sep  5 08:43:28 unknown configd[14] <Notice>: IPSec Network Configuration started.
Sep  5 08:43:28 unknown configd[14] <Notice>: IPSec Network Configuration: INTERNAL-IP4-ADDRESS = x.x.x.x.
Sep  5 08:43:28 unknown configd[14] <Notice>: IPSec Network Configuration: INTERNAL-IP4-MASK = 255.255.255.0.
Sep  5 08:43:28 unknown configd[14] <Notice>: IPSec Network Configuration: SAVE-PASSWORD = 1.
Sep  5 08:43:28 unknown configd[14] <Notice>: IPSec Network Configuration: INTERNAL-IP4-DNS = x.x.x.x.
Sep  5 08:43:28 unknown configd[14] <Notice>: IPSec Network Configuration: INTERNAL-IP4-DNS = x.x.x.x.
Sep  5 08:43:28 unknown configd[14] <Notice>: IPSec Network Configuration: BANNER = !!!!! WARNING !!!!!
     Unauthorized access and use of this system is
     not permitted and strictly prohibited by
     security policies, regulations, state and federal
     law.
     UNAUTHORIZED USERS ARE SUBJECT TO CRIMINAL AND
     CIVIL PENALTIES AS WELL AS COMPANY INITIATED
     DISCIPLINARY PROCEEDINGS..
Sep  5 08:43:28 unknown configd[14] <Notice>: IPSec Network Configuration: DEF-DOMAIN = domain.com.
Sep  5 08:43:28 unknown configd[14] <Notice>: IPSec Network Configuration: DEFAULT-ROUTE = local-address x.x.x.x/32.
Sep  5 08:43:28 unknown configd[14] <Notice>: IPSec Phase2 starting.
��Sep  5 08:43:28 unknown configd[14] <Notice>: IPSec Network Configuration established.
��Sep  5 08:43:28 unknown configd[14] <Notice>: IPSec Phase1 established.
Sep  5 08:43:28 unknown configd[14] <Notice>: event_callback: Address added. previous interface setting (name: en0, address: x.x.x.x), current interface setting (name: utun0, family: 1000, address: x.x.x.x, subnet: 255.255.255.0, destination:x.x.x.x).
Sep  5 08:43:28 unknown racoon[657] <Notice>: IPSec Phase2 started (Initiated by me).
Sep  5 08:43:28 unknown apsd[68] <Warning>: <APSCourier: 0x130da0>: Stream error occurred for <APSTCPStream: 0xe62d100>: Error Domain=NSPOSIXErrorDomain Code=57 "The operation couldn’-t -b-e -c-o-m-p-l-e-t-e-d-. -S-o-c-k-e-t -i-s -n-o-t -c-o-n-n-e-c-t-e-d-" -U-s-e-r-I-n-f-o-=-0-x-e-6-2-c-7-3-0 -{-}
Sep  5 08:43:28 unknown configd[14] <Notice>: network configuration changed.
Sep  5 08:43:28 unknown configd[14] <Error>: IPSec Controller: IKE FAILED. phase 5, assert 0
Sep  5 08:43:28 unknown configd[14] <Notice>: IPSec disconnecting from server x.x.x.x
Sep  5 08:43:28 unknown racoon[657] <Notice>: IPSec disconnecting from server x.x.x.x
Sep  5 08:43:28 unknown mDNSResponder[45] <Error>: UpdateInterfaceList: if_nametoindex returned zero/negative value for utun0(0)
Sep  5 08:43:28 unknown configd[14] <Error>: SCNC Controller: service_ending_verify_primaryservice, waiting for PrimaryService. status = 1.
Sep  5 08:43:28 unknown mDNSResponder[45] <Error>: ConfigResolvers: interface specific index 8 not found
Sep  5 08:43:28 unknown mDNSResponder[45] <Error>: ConfigResolvers: interface specific index 8 not found
Sep  5 08:43:28 unknown mDNSResponder[45] <Error>: ConfigResolvers: interface specific index 8 not found
Sep  5 08:43:28 unknown mDNSResponder[45] <Error>: ConfigResolvers: interface specific index 8 not found
��Sep  5 08:43:28 unknown configd[14] <Notice>: network configuration changed.
Sep  5 08:43:28 unknown configd[14] <Error>: SCNC Controller: ipv4_state_changed, done waiting for ServiceID.

Similar Messages

  • Users VPN drops after every 5 mins

                       Hi everyone,
    We have user whose remote VPN drops after every 5 mins.
    Need to know whats things i can check to troubleshoot the issue?
    User connects by RSA Token.
    ISP connection is ok its not issue.
    Any thing i can check in ASA ?
    Thanks
    Mahesh

    On the client side, have you tested wired vs wireless to see if the problems exists in both?  If it's only one of them but not the other, try updating the drivers.  Also, if it's windows 7, take a look at the power settings in control panel.  I've seen where agressive power settings will shut off the network port when idle.  Not that big of a deal in a LAN environment but it wreaks havoc on VPN.

  • Only my MBP Drops L2TP VPN Connection after 60 Seconds

    My Old G4 Laptop and my Dual G5 Tower both connect to my office via L2TP VPN without an issue. with the exact same settings exported over to my mac book pro, the connection drops after exactly 60 seconds. I've tried both wireless and wired connections, and in either case, the VPN drops after 60 seconds of connect time.

    I checked with my VPN administrator. He upgraded the XServe to Mac OS 10.4.5, and we tried again, with the same results. He sent me the server log to post:
    2006-03-14 14:39:20 PST Listening for connections...
    2006-03-14 14:43:44 PST terminating on signal 15
    2006-03-14 14:43:44 PST terminating on signal 15
    #End-Date: 2006-03-14 14:43:44 PST
    #End-Date: 2006-03-14 14:43:44 PST
    #Start-Date: 2006-03-14 14:44:55 PST
    #Fields: date time s-comment
    #Start-Date: 2006-03-14 14:44:55 PST
    #Fields: date time s-comment
    2006-03-14 14:44:55 PST Loading plugin /System/Library/Extensions/L2TP.ppp
    2006-03-14 14:44:55 PST Loading plugin /System/Library/Extensions/PPTP.ppp
    2006-03-14 14:44:58 PST Listening for connections...
    2006-03-14 14:44:58 PST Listening for connections...
    2006-03-14 17:06:52 PST Incoming call... Address given to client = 172.16.6.2
    Tue Mar 14 17:06:52 2006 : Directory Services Authentication plugin initialized
    Tue Mar 14 17:06:52 2006 : Directory Services Authorization plugin initialized
    Tue Mar 14 17:06:52 2006 : PPTP incoming call in progress from 'REDACTED'...
    Tue Mar 14 17:06:52 2006 : PPTP connection established.
    Tue Mar 14 17:06:52 2006 : using link 0
    Tue Mar 14 17:06:52 2006 : Using interface ppp0
    Tue Mar 14 17:06:52 2006 : Connect: ppp0 <--> socket[34:17]
    Tue Mar 14 17:06:52 2006 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0xe2f50f1d> <pcomp> <accomp>]
    Tue Mar 14 17:06:52 2006 : rcvd [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x122fcd45> <pcomp> <accomp>]
    Tue Mar 14 17:06:52 2006 : lcp_reqci: returning CONFACK.
    Tue Mar 14 17:06:52 2006 : sent [LCP ConfAck id=0x1 <asyncmap 0x0> <magic 0x122fcd45> <pcomp> <accomp>]
    Tue Mar 14 17:06:55 2006 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0xe2f50f1d> <pcomp> <accomp>]
    Tue Mar 14 17:06:55 2006 : rcvd [LCP ConfAck id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0xe2f50f1d> <pcomp> <accomp>]
    Tue Mar 14 17:06:55 2006 : sent [LCP EchoReq id=0x0 magic=0xe2f50f1d]
    Tue Mar 14 17:06:55 2006 : sent [CHAP Challenge id=0xbf <cc4af73a9d88941b39418f9c31043e6c>, name = "osxvpn.local"]
    Tue Mar 14 17:06:55 2006 : rcvd [LCP EchoReq id=0x0 magic=0x122fcd45]
    Tue Mar 14 17:06:55 2006 : sent [LCP EchoRep id=0x0 magic=0xe2f50f1d]
    Tue Mar 14 17:06:55 2006 : rcvd [LCP EchoRep id=0x0 magic=0x122fcd45]
    Tue Mar 14 17:06:55 2006 : rcvd [CHAP Response id=0xbf <REDACTED>, name = "dpisoni"]
    Tue Mar 14 17:06:55 2006 : sent [CHAP Success id=0xbf "S=REDACTED M=Access granted"]
    Tue Mar 14 17:06:55 2006 : DSAccessControl plugin: User 'dpisoni' authorized for access
    Tue Mar 14 17:06:55 2006 : sent [CCP ConfReq id=0x1 <mppe +H -M +S -L -D -C>]
    Tue Mar 14 17:06:55 2006 : rcvd [CCP ConfReq id=0x1 <mppe +H -M +S -L -D -C>]
    Tue Mar 14 17:06:55 2006 : sent [CCP ConfAck id=0x1 <mppe +H -M +S -L -D -C>]
    Tue Mar 14 17:06:55 2006 : rcvd [CCP ConfAck id=0x1 <mppe +H -M +S -L -D -C>]
    Tue Mar 14 17:06:55 2006 : MPPE 128-bit stateless compression enabled
    Tue Mar 14 17:06:55 2006 : sent [IPCP ConfReq id=0x1 <addr 172.16.100.51>]
    Tue Mar 14 17:06:55 2006 : sent [ACSCP] 01 01 00 04
    Tue Mar 14 17:06:55 2006 : rcvd [IPCP ConfReq id=0x1 <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>]
    Tue Mar 14 17:06:55 2006 : ipcp: returning Configure-NAK
    Tue Mar 14 17:06:55 2006 : sent [IPCP ConfNak id=0x1 <addr 172.16.6.2> <ms-dns1 172.16.5.100> <ms-dns3 172.16.5.100>]
    Tue Mar 14 17:06:55 2006 : rcvd [IPV6CP ConfReq id=0x1 <addr fe80::0216:cbff:fe89:f062>]
    Tue Mar 14 17:06:55 2006 : Unsupported protocol 0x8057 received
    Tue Mar 14 17:06:55 2006 : sent [LCP ProtRej id=0x2 80 57 01 01 00 0e 01 0a 02 16 cb ff fe 89 f0 62]
    Tue Mar 14 17:06:55 2006 : rcvd [ACSCP] 01 01 00 10 01 06 00 00 00 01 02 06 00 00 00 01
    Tue Mar 14 17:06:55 2006 : sent [ACSCP] 04 01 00 0a 01 06 00 00 00 01
    Tue Mar 14 17:06:55 2006 : rcvd [IPCP ConfAck id=0x1 <addr 172.16.100.51>]
    Tue Mar 14 17:06:55 2006 : rcvd [ACSCP] 02 01 00 04
    Tue Mar 14 17:06:55 2006 : rcvd [IPCP ConfReq id=0x2 <addr 172.16.6.2> <ms-dns1 172.16.5.100> <ms-dns3 172.16.5.100>]
    Tue Mar 14 17:06:55 2006 : ipcp: returning Configure-ACK
    Tue Mar 14 17:06:55 2006 : sent [IPCP ConfAck id=0x2 <addr 172.16.6.2> <ms-dns1 172.16.5.100> <ms-dns3 172.16.5.100>]
    Tue Mar 14 17:06:55 2006 : ipcp: up
    Tue Mar 14 17:06:55 2006 : found interface en0 for proxy arp
    Tue Mar 14 17:06:55 2006 : local IP address 172.16.100.51
    Tue Mar 14 17:06:55 2006 : remote IP address 172.16.6.2
    Tue Mar 14 17:06:58 2006 : sent [ACSCP] 01 01 00 04
    Tue Mar 14 17:06:58 2006 : rcvd [ACSCP] 01 01 00 10 01 06 00 00 00 01 02 06 00 00 00 01
    Tue Mar 14 17:06:58 2006 : sent [ACSCP] 04 01 00 0a 01 06 00 00 00 01
    Tue Mar 14 17:06:58 2006 : rcvd [ACSCP] 02 01 00 04
    Tue Mar 14 17:07:01 2006 : sent [ACSCP] 01 01 00 04
    Tue Mar 14 17:07:01 2006 : rcvd [ACSCP] 01 01 00 10 01 06 00 00 00 01 02 06 00 00 00 01
    Tue Mar 14 17:07:01 2006 : sent [ACSCP] 04 01 00 0a 01 06 00 00 00 01
    Tue Mar 14 17:07:01 2006 : rcvd [ACSCP] 02 01 00 04
    Tue Mar 14 17:07:04 2006 : sent [ACSCP] 01 01 00 04
    Tue Mar 14 17:07:04 2006 : rcvd [ACSCP] 01 01 00 10 01 06 00 00 00 01 02 06 00 00 00 01
    Tue Mar 14 17:07:04 2006 : sent [ACSCP] 04 01 00 0a 01 06 00 00 00 01
    Tue Mar 14 17:07:04 2006 : rcvd [ACSCP] 02 01 00 04
    Tue Mar 14 17:07:07 2006 : sent [ACSCP] 01 01 00 04
    Tue Mar 14 17:07:07 2006 : rcvd [ACSCP] 01 01 00 10 01 06 00 00 00 01 02 06 00 00 00 01
    Tue Mar 14 17:07:07 2006 : sent [ACSCP] 04 01 00 0a 01 06 00 00 00 01
    Tue Mar 14 17:07:07 2006 : rcvd [ACSCP] 02 01 00 04
    Tue Mar 14 17:07:10 2006 : sent [ACSCP] 01 01 00 04
    Tue Mar 14 17:07:10 2006 : rcvd [ACSCP] 01 01 00 10 01 06 00 00 00 01 02 06 00 00 00 01
    Tue Mar 14 17:07:10 2006 : sent [ACSCP] 04 01 00 0a 01 06 00 00 00 01
    Tue Mar 14 17:07:10 2006 : rcvd [ACSCP] 02 01 00 04
    Tue Mar 14 17:07:13 2006 : sent [ACSCP] 01 01 00 04
    Tue Mar 14 17:07:13 2006 : rcvd [ACSCP] 01 01 00 10 01 06 00 00 00 01 02 06 00 00 00 01
    Tue Mar 14 17:07:13 2006 : sent [ACSCP] 04 01 00 0a 01 06 00 00 00 01
    Tue Mar 14 17:07:13 2006 : rcvd [ACSCP] 02 01 00 04
    Tue Mar 14 17:07:16 2006 : sent [ACSCP] 01 01 00 04
    Tue Mar 14 17:07:16 2006 : rcvd [ACSCP] 01 01 00 10 01 06 00 00 00 01 02 06 00 00 00 01
    Tue Mar 14 17:07:16 2006 : sent [ACSCP] 04 01 00 0a 01 06 00 00 00 01
    Tue Mar 14 17:07:16 2006 : rcvd [ACSCP] 02 01 00 04
    Tue Mar 14 17:07:19 2006 : sent [ACSCP] 01 01 00 04
    Tue Mar 14 17:07:19 2006 : rcvd [ACSCP] 01 01 00 10 01 06 00 00 00 01 02 06 00 00 00 01
    Tue Mar 14 17:07:19 2006 : sent [ACSCP] 04 01 00 0a 01 06 00 00 00 01
    Tue Mar 14 17:07:19 2006 : rcvd [ACSCP] 02 01 00 04
    Tue Mar 14 17:07:22 2006 : sent [ACSCP] 01 01 00 04
    Tue Mar 14 17:07:22 2006 : rcvd [ACSCP] 01 01 00 10 01 06 00 00 00 01 02 06 00 00 00 01
    Tue Mar 14 17:07:22 2006 : sent [ACSCP] 04 01 00 0a 01 06 00 00 00 01
    Tue Mar 14 17:07:22 2006 : rcvd [ACSCP] 02 01 00 04
    Tue Mar 14 17:07:25 2006 : sent [ACSCP] 01 01 00 04
    Tue Mar 14 17:07:25 2006 : rcvd [ACSCP] 01 02 00 10 01 06 00 00 00 01 02 06 00 00 00 01
    Tue Mar 14 17:07:25 2006 : sent [ACSCP] 04 02 00 0a 01 06 00 00 00 01
    Tue Mar 14 17:07:25 2006 : rcvd [ACSCP] 02 01 00 04
    Tue Mar 14 17:07:28 2006 : sent [ACSCP] 01 01 00 04
    Tue Mar 14 17:07:28 2006 : rcvd [ACSCP] 02 01 00 04
    Tue Mar 14 17:07:31 2006 : sent [ACSCP] 01 01 00 04
    Tue Mar 14 17:07:31 2006 : rcvd [ACSCP] 02 01 00 04
    Tue Mar 14 17:07:31 2006 : rcvd [ACSCP] 01 02 00 10 01 06 00 00 00 01 02 06 00 00 00 01
    Tue Mar 14 17:07:31 2006 : sent [ACSCP] 04 02 00 0a 01 06 00 00 00 01
    Tue Mar 14 17:07:34 2006 : sent [ACSCP] 01 01 00 04
    Tue Mar 14 17:07:34 2006 : rcvd [ACSCP] 02 01 00 04
    Tue Mar 14 17:07:34 2006 : rcvd [ACSCP] 01 02 00 10 01 06 00 00 00 01 02 06 00 00 00 01
    Tue Mar 14 17:07:34 2006 : sent [ACSCP] 04 02 00 0a 01 06 00 00 00 01
    Tue Mar 14 17:07:37 2006 : sent [ACSCP] 01 01 00 04
    Tue Mar 14 17:07:37 2006 : rcvd [ACSCP] 01 02 00 10 01 06 00 00 00 01 02 06 00 00 00 01
    Tue Mar 14 17:07:37 2006 : sent [ACSCP] 04 02 00 0a 01 06 00 00 00 01
    Tue Mar 14 17:07:37 2006 : rcvd [ACSCP] 02 01 00 04
    Tue Mar 14 17:07:40 2006 : sent [ACSCP] 01 01 00 04
    Tue Mar 14 17:07:40 2006 : rcvd [ACSCP] 02 01 00 04
    Tue Mar 14 17:07:40 2006 : rcvd [ACSCP] 01 02 00 10 01 06 00 00 00 01 02 06 00 00 00 01
    Tue Mar 14 17:07:40 2006 : sent [ACSCP] 04 02 00 0a 01 06 00 00 00 01
    Tue Mar 14 17:07:43 2006 : sent [ACSCP] 01 01 00 04
    Tue Mar 14 17:07:43 2006 : rcvd [ACSCP] 02 01 00 04
    Tue Mar 14 17:07:43 2006 : rcvd [ACSCP] 01 02 00 10 01 06 00 00 00 01 02 06 00 00 00 01
    Tue Mar 14 17:07:43 2006 : sent [ACSCP] 04 02 00 0a 01 06 00 00 00 01
    Tue Mar 14 17:07:46 2006 : sent [ACSCP] 01 01 00 04
    Tue Mar 14 17:07:46 2006 : rcvd [ACSCP] 02 01 00 04
    Tue Mar 14 17:07:46 2006 : rcvd [ACSCP] 01 02 00 10 01 06 00 00 00 01 02 06 00 00 00 01
    Tue Mar 14 17:07:46 2006 : sent [ACSCP] 04 02 00 0a 01 06 00 00 00 01
    Tue Mar 14 17:07:49 2006 : sent [ACSCP] 01 01 00 04
    Tue Mar 14 17:07:49 2006 : rcvd [ACSCP] 02 01 00 04
    Tue Mar 14 17:07:49 2006 : rcvd [ACSCP] 01 02 00 10 01 06 00 00 00 01 02 06 00 00 00 01
    Tue Mar 14 17:07:49 2006 : sent [ACSCP] 04 02 00 0a 01 06 00 00 00 01
    Tue Mar 14 17:07:52 2006 : sent [ACSCP] 01 01 00 04
    Tue Mar 14 17:07:52 2006 : rcvd [ACSCP] 01 02 00 10 01 06 00 00 00 01 02 06 00 00 00 01
    Tue Mar 14 17:07:52 2006 : sent [ACSCP] 04 02 00 0a 01 06 00 00 00 01
    Tue Mar 14 17:07:52 2006 : rcvd [ACSCP] 02 01 00 04
    Tue Mar 14 17:07:55 2006 : sent [ACSCP] 01 01 00 04
    Tue Mar 14 17:07:55 2006 : rcvd [ACSCP] 02 01 00 04
    Tue Mar 14 17:07:55 2006 : rcvd [LCP TermReq id=0x2 "MPPE disabled"]
    Tue Mar 14 17:07:55 2006 : LCP terminated by peer (MPPE disabled)
    Tue Mar 14 17:07:55 2006 : ipcp: down
    Tue Mar 14 17:07:55 2006 : sent [LCP TermAck id=0x2]
    Tue Mar 14 17:07:55 2006 : rcvd [LCP TermReq id=0x3 "MPPE disabled"]
    Tue Mar 14 17:07:55 2006 : sent [LCP TermAck id=0x3]
    Tue Mar 14 17:07:55 2006 : Connection terminated.
    Tue Mar 14 17:07:55 2006 : Connect time 1.1 minutes.
    Tue Mar 14 17:07:55 2006 : Sent 0 bytes, received 8176 bytes.
    Tue Mar 14 17:07:55 2006 : PPTP disconnecting...
    Tue Mar 14 17:07:55 2006 : PPTP disconnected
    2006-03-14 17:07:55 PST --> Client with address = 172.16.6.2 has hungup

  • IPad drops L2TP VPN connection after 1 minute??

    IPad drops L2TP VPN connection after 1 minute of no activity? I'm connected just fine to my sonicwall FW.

    IPad drops L2TP VPN connection after 1 minute of no activity? I'm connected just fine to my sonicwall FW.

  • Remote App on iPad connects but drops after about  20 mins. Need to turn  off wait about 1 minute then turn on wifi on iMac before it can reconnect. Need some help please.

    Remote App on iPad connects but drops after about  20 mins. Need to turn  off wait about 1 minute, then turn on wifi on iMac before it can reconnect. Need some help please.
    Already gone through troubleshooting guide a zillion times. Thanks.

    This worked for me... A little time consuming but once you get rolling it goes GREAT... Thanks....
    I got my artwork and saved it to my Desktop
    Opened up Microsoft Paint and clicked on "File" and "Open" and found it to get it on the screen to resize it
    Clicked "resize" and a box for changing it opened up
    Checked the box "Pixels" and "Unchecked maintain aspect ratio"
    Set Horizontal for 640 and Vertical for 480
    Clicked on "OK" and went back to "File" and did a "Save As" and chose JPEG Picture
    It came up "File Already Existed" and clicked "OK" (really did not care about the original artwork I found because wrong size)
    Went to iTunes and on the movie right clicked on "Get Info", clicked on "Details", then "Artwork"
    Go to the little box on the top left that shows your old artwork and click on it to get the little blue border to appear around it and hit "Delete" to make it gone
    Click on "Add Artwork" and find it where you put the one from above on your Desktop and hit "Open" and OK and your new artwork is now there and all good.
    Sounds like a lot of steps to follow but after around 5 or so you will fly through it. This worked perfect on my iPhone 6 Plus and I have artwork on my Home Videos now.

  • The inbound calls to our call center is drop after putting it on hold or transfer

    Dear All;    
    Good day  
    The inbound calls to our call center is drop after putting it on hold or transfer the call to another agent. The MOH file is playing till 21 sec only then call drop . the agent cant resume the call again. The MOH file is running from Gateway (multicast).
    No problem in outbound calls.
    I urgent need you help
    Should you require any more information , please do not hesitate to contact me.
    Thanks & Best Regards,
    Muhammad Fathy,
    IT Network Manager
    ALEXBANK
    A subsidiary of Intesa Sanpaolo Group
    Head office: B210-F1, Smart Village , KM 28 Cairo-Alex Desert Road, Egypt.
    Cell:      +201017288844.
    Office:  +202-35311300   Ext: 8090.
    eMail:   [email protected]
    i To maintain a paperless environment, please don't print this e-mail unless you really need to.

    Typically you have a codec or media resource issue to track down.  IE, MTP, region, location, gateway trunk to trunk to call or something in that area.   Bypass UCCX and do the same call without this app... does it happen with a normal call?

  • Bluetooth dropping after update to 10.6.8

    The bluetooth connection between my Nokia BH-908 headsets and my mac mini periodically drops after I upgraded to 10.6.8.   Restarting blued daemon via Bluetooth Explorer does not fix the problem; I have to reboot the computer to restore the connection.   I've tried resetting the System Management Controller (SMC) and I attempted to delete the device and re-pairing it.  Neither of those things worked, the headset sill drops periodically.    This is what the kernel logs say when the device drops:
    Aug  8 07:01:41 kernel[0]: E:[AppleUSBBluetoothHCIController][BulkOutWriteCompleteHandler] ERROR2: 0xe0004006; sizeRem=00000059; isInactive = 0, suspended = 0
    Aug  8 07:01:41 kernel[0]: E:[AppleUSBBluetoothHCIController][SendACLData] Bulk out [ACL] data failed. (error = 0xe000404f )
    Aug  8 07:01:42: --- last message repeated 20 times ---
    Again, this only started happening after I upgraded to 10.6.8.   Any suggestions for resolving this issue?

    It was a good suggestion, but unfortunately that didn't solve the prolem.   Here's the Bluetooth Exploer actions I tried:

  • VPN disconnect after 1 minute with INTEL 10.4.5 to SERVER 10.4.6?

    any clue?

    I've had simliar issues with VPN dropping connections, not exactly the same set up. However, always resolved by dropping the MTU size in advanced Ethernet set up on the client to custom at 1303. If it still doesn't work try this on your server too.

  • Can't drag and drop after update

    can't drag and drop after update

    hi Dustin, maybe with a bit more info someone will be able to help with this:
    what Mac OS System version are you using?
    what is it you are 'dragging and dropping'? : Is this drag and drop of text in InDesign? Or are you dragging and dropping from the Mac OS (e.g. a file from a folder) into InDesign?
    If you are referring to drag and drop from OS into InDesign: I'm thinking this 'might' be a Mac OSX issue. If you look over at https://discussions.apple.com/index.jspa there seem to be plenty of issues with drag and drop across different OS versions.
    Next time it stops working whilst you are in InDesign, does it still work in other programs? That is one way of determining if this is caused by InDesign or the operating system. If it is the OS, my guess is that it stops working in other applicaitons as well.
    Hope this helps,
    Cari
    twitter: carijansen
    facebook: carijansen.au

  • Why can't I make any calls on facetime, the call drops after saying connecting.

    Why can't I make any calls on facetime, the call drops after saying connecting for a few seconds. I'm using an iphone 5, 32 GB on IOS 6.0.1 over 3G network in Muscat, Oman. Just to be clear, I was able to make facetime call in Muscat about a week ago.

    If this user to user forum could not help you with your issue, contact Apple to get your Device serviced or looked at.
    http://www.apple.com/contact/

  • J_security_check not redirecting after authentication - in one environment

    Hi all,
    I have a J2EE web application developed in JDeveloper 10.1.3 which uses JAAS security with a custom authentication provider class. I can configure this is both a windows and unix based OC4J. The windows OC4J is stand alone, the unix one is part of a managed instance (OPMN).
    When I deploy to windows, attempts to access a protected resource cause the authentication to fire off perfectly and redirect to the appropriate url after login is successful. Absolutely no problems.
    When I deploy to unix with the same configuration, the authentication fires off perfectly but after authentication the redirect attempts to go to Base URL/j_security_check which results in a 404 not found as j_security_check is a logical name and not a real url.
    I have tried setting the ocfj.formauth.redirect flag in the oc4j startup options and this did not seen to help. I still got the 404 error.
    Can anyone advise me on whether there are any switches or parameters I need to set for the j_security_check redirection to work correctly, or is there something else I need to do in a unix (Solaris) environment to cause the redirections to work?
    thanks for any suggestions
    Ben

    Hi,
    you are always seeing the j_security_check in the URL. It seems that this problem is OC4J rekated and I suggest to post the question on the Application Server or the J2EE forum here on OTN
    Frank

  • Have to restart VPN service after restarting macmini

    Hello,
    i am using a mid2011 macmini with Lion Server (10.7.2-Build 11C74) loaded over the Appstore, connected to an Airport Extreme (FW 7.6). I configured the VPN service in the Server settings and forwarded the profile to the clients. VPN connection works just fine.
    When i restart the macmini none of the clients are able to connect with the VPN Service. Other services are running without any problems (screensharing, filesharing,...), but i cannot connect with the VPN service through any client.
    After i restart the VPN Service (switch off and back on) in the Server App on the macmini it works again.
    Is anyone experiencing similar behaviour with the VPN service after a restart of the server? Has anyone suggestions how to get the VPN service working even after a restart without switching it off and on again?
    If you need further information please reply, i will hand it in immediately.
    FYI:
    I did make a complete clean install of the Server, without import of the timemachine backup to ensure the system is "clean".
    kind regards
    Marko

    Hello,
    i am using a mid2011 macmini with Lion Server (10.7.2-Build 11C74) loaded over the Appstore, connected to an Airport Extreme (FW 7.6). I configured the VPN service in the Server settings and forwarded the profile to the clients. VPN connection works just fine.
    When i restart the macmini none of the clients are able to connect with the VPN Service. Other services are running without any problems (screensharing, filesharing,...), but i cannot connect with the VPN service through any client.
    After i restart the VPN Service (switch off and back on) in the Server App on the macmini it works again.
    Is anyone experiencing similar behaviour with the VPN service after a restart of the server? Has anyone suggestions how to get the VPN service working even after a restart without switching it off and on again?
    If you need further information please reply, i will hand it in immediately.
    FYI:
    I did make a complete clean install of the Server, without import of the timemachine backup to ensure the system is "clean".
    kind regards
    Marko

  • SQL performance drops after 20 mins

    Hello,
    I am using Oracle Version 9.2.0.5
    I have an SQL query that starts off fast but the performance drops after running for 20 mins. It continues to drop till a point where it becomes painfully slow.
    The query is as attached below:
    SELECT      /*+ INDEX (abe ASR_I_BID_PRD_TOD_5FAX)
    INDEX (aae ASR_I_AE_RC_BR)
    INDEX (ab ASR_UK_BASES)
    INDEX (aaac ASR_I_AFAC_SP)
    +*/aae.f8_code
    ||','||     aae.sector
    ||','||     aae.ouc
    ||','||     aae.rule_type
    ||','||     aae.base_ref
    ||','||     aae.prodlist_ref
    ||','|| aaac.L101
    ||','|| aaac.L201
    ||','|| aaac.L301
    ||','|| aaac.L401
    ||','|| aaac.L501
    ||','|| aaac.L601
    ||','|| aaac.L701
    ||','|| aaac.L801
    ||','|| aaac.L802
    ||','|| aaac.L830
    ||','|| aaac.L850
    ||','|| aaac.L870
    ||','|| aaac.L901
    ||','|| aaac.L1001
    ||','||     LTRIM(TO_CHAR((aae.disaggregated_amount*abe.percentage*aaac.chain_perc)/10000,'999999999999999.99'))
    FROM asr_owner.asr_account_entries aae
    , asr_owner.asr_base_elements_5fax abe
    , asr_ff_audit_chains aaac
    , asr_owner.asr_bases ab
    WHERE aae.run_code = '5fax'
    AND ab.run_code = aae.run_code
    AND ab.base_type = aaac.base_type
    AND ab.base_id = abe.base_id
    AND ab.base_ref = aae.base_ref
    AND aaac.base_type = 'L'
    AND aaac.business <> 'R'
    AND aae.trans_type IN ('A','C','D')
    AND abe.base_id = aae.base_id
    AND 100*(abe.exhaust_level)+abe.exhaust_sub_level = 101
    AND aaac.start_prod = abe.product
    AND ABS((aae.disaggregated_amount*abe.percentage*aaac.chain_perc)/10000) >= 0.01
    It has huge number of records. I have checked all join conditions and they are all fine.
    asr_owner.asr_account_entries - 3.6 millions rows
    asr_owner.asr_base_elements_5fax - 1.8 million rows
    asr_ff_audit_chains - 5.8 million rows
    asr_owner.asr_bases - 0.5 million rows
    The autotrace and plan are as follows
    Statistics
    0 recursive calls
    0 db block gets
    5264 consistent gets
    3522 physical reads
    0 redo size
    525 bytes sent via SQL*Net to client
    456 bytes received via SQL*Net from client
    1 SQL*Net roundtrips to/from client
    5 sorts (memory)
    0 sorts (disk)
    0 rows processed
    PLAN_TABLE_OUTPUT
    | Id | Operation | Name | Rows | Bytes | Cost |
    | 0 | SELECT STATEMENT | | 83 | 13529 | 12465 |
    | 1 | TABLE ACCESS BY INDEX ROWID | ASR_FF_AUDIT_CHAINS | 83 | 6225 | 617 |
    | 2 | NESTED LOOPS | | 83 | 13529 | 12465 |
    | 3 | NESTED LOOPS | | 1 | 88 | 11848 |
    | 4 | NESTED LOOPS | | 2201 | 113K| 3044 |
    | 5 | TABLE ACCESS BY INDEX ROWID| ASR_BASES | 774 | 13158 | 722 |
    | 6 | INDEX FULL SCAN | ASR_UK_BASES | 104K| | 104 |
    | 7 | TABLE ACCESS BY INDEX ROWID| ASR_ACCOUNT_ENTRIES | 3 | 108 | 3 |
    | 8 | INDEX RANGE SCAN | ASR_I_AE_RC_BR | 8 | | 1 |
    | 9 | TABLE ACCESS BY INDEX ROWID | ASR_BASE_ELEMENTS_5FAX | 1 | 35 | 4 |
    | 10 | INDEX RANGE SCAN | ASR_I_BID_PRD_TOD_5FAX | 1 | | 3 |
    | 11 | INDEX RANGE SCAN | ASR_I_AFAC_SP | 8241 | | 9 |
    Note: cpu costing is off, PLAN_TABLE' is old version
    19 rows selected.
    I have also tried without the hints and the plan looks like
    | Id | Operation | Name | Rows | Bytes | Cost |
    | 0 | SELECT STATEMENT | | 83 | 13529 | 679 |
    | 1 | TABLE ACCESS BY INDEX ROWID| ASR_FF_AUDIT_CHAINS | 83 | 6225 | 617 |
    | 2 | NESTED LOOPS | | 83 | 13529 | 679 |
    | 3 | HASH JOIN | | 1 | 88 | 370 |
    | 4 | HASH JOIN | | 2201 | 113K| 208 |
    | 5 | TABLE ACCESS FULL | ASR_BASES | 774 | 13158 | 16 |
    | 6 | TABLE ACCESS FULL | ASR_ACCOUNT_ENTRIES | 12125 | 426K| 191 |
    | 7 | TABLE ACCESS FULL | ASR_BASE_ELEMENTS_5FAX | 18325 | 626K| 161 |
    | 8 | INDEX RANGE SCAN | ASR_I_AFAC_SP | 8241 | | 9 |
    Note: cpu costing is off, PLAN_TABLE' is old version
    16 rows selected.
    I have tried increasing the hash_area_size parameter to 20MB (it is currently 10MB).
    I have tried setting the tuning parameters like optimizer_index_cost_adj but to no success.
    Could you please help.

    Thanks a lot for all the help.
    Here is another query that is running quite slow. Any help on this might be helpful
    EXPLAIN PLAN SET statement_id = 'auditextract' FOR
    SELECT /*+NO_INDEX(aaac)
           NO_INDEX(aae)
           NO_INDEX(abe)
           NO_INDEX(ab)
           NO_INDEX(agp)+*/
         aae.run_code
    ,     aae.f8_code
    ,     aae.sector
    ,     aae.ouc
    ,     aae.rule_type
    ,     aae.base_ref
    ,     aae.prodlist_ref
    ,     aae.trans_type
    ,     aaac.base_type
    ,DECODE(NVL(aaac.exhaust_chain,'NULL'),'NULL',',',NULL)||aaac.exhaust_chain||
      DECODE(NVL(aaac.exhaust_chain,'NULL'),'NULL',NULL,',')||LTRIM(RTRIM(aaac.final_prod))||
                RPAD(',',14-DECODE(aaac.final_level,1001,14,901,13,870,12,850,11,830,10,802,9,801,8,701,7,601,6,501,5,401,4,301,3,201,2,101,1),',') exhaust_chain,
         aaac.final_level     ,
         aaac.business ,
         L101,
         L101_TOD,
         L201,
         L201_TOD,
         L301,
         L301_TOD,
         L401,
         L401_TOD,
         L501,
         L501_TOD,
         L601,
         L601_TOD,
         L701,
         L701_TOD,
         L801,
         L801_TOD,
         L802,
         L802_TOD,
         L830,
         L830_TOD,
         L850,
         L850_TOD,
         L870,
         L870_TOD,
         L901,
         L901_TOD,
         L1001,
         L1001_TOD,
         (aae.disaggregated_amount*abe.percentage*aaac.chain_perc)/10000 money
    FROM   asr_owner.asr_account_entries aae
    ,      asr_owner.asr_base_elements_5fax abe
    ,      asr_owner.asr_bases ab
    ,      ASR_FF_AUDIT_CHAINS aaac
    WHERE  aae.run_code    = '5fax'
    AND    ab.run_code = aae.run_code
    AND    abe.run_code = ab.run_code
    AND    ab.base_type = aaac.base_type
    AND    ab.base_id = abe.base_id
    AND    aaac.base_type = 'L'
    AND    aaac.business = 'R'
    AND    ab.base_ref = aae.base_ref
    AND    aae.trans_type IN ('A','C','D','G','J')
    AND    abe.base_id     = aae.base_id
    AND    abe.exhaust_level = 1
    AND    abe.exhaust_sub_level = 1
    AND    aaac.start_prod = abe.product
    AND    NOT EXISTS (SELECT 1
                        FROM asr_group_prods agp
                        WHERE agp.product_group IN ('SW500','SR500','G176')
                        AND  (aaac.L101 =  agp.product OR
                                  aaac.L201 =  agp.product OR
                                     aaac.L301 =  agp.product OR
                                     aaac.L401 =  agp.product OR
                                     aaac.L501 =  agp.product OR
                                     aaac.L601 =  agp.product OR
                                     aaac.L701 =  agp.product OR
                                     aaac.L801 =  agp.product OR
                                     aaac.L802 =  agp.product OR
                                     aaac.L830 =  agp.product OR
                                     aaac.L850 =  agp.product OR
                                     aaac.L870 =  agp.product OR
                                     aaac.L901 =  agp.product OR
                                     aaac.L1001 =  agp.product))
    AND    abs((aae.disaggregated_amount*abe.percentage*aaac.chain_perc)) >= 100
    PLAN_TABLE_OUTPUT
    | Id  | Operation             |  Name                   | Rows  | Bytes | Cost  |
    |   0 | SELECT STATEMENT      |                         |   571 |   112K|  5586 |
    |*  1 |  FILTER               |                         |       |       |       |
    |*  2 |   HASH JOIN           |                         |   571 |   112K|  5586 |
    |*  3 |    HASH JOIN          |                         |    53 |  5406 |   370 |
    |*  4 |     HASH JOIN         |                         |  2974 |   177K|   178 |
    |*  5 |      TABLE ACCESS FULL| ASR_BASES               |   770 | 15400 |    16 |
    |*  6 |      TABLE ACCESS FULL| ASR_BASE_ELEMENTS_5FAX  | 26178 |  1048K|   161 |
    |*  7 |     TABLE ACCESS FULL | ASR_ACCOUNT_ENTRIES     | 17739 |   710K|   191 |
    |*  8 |    TABLE ACCESS FULL  | ASR_FF_AUDIT_CHAINS     |   126K|    12M|  5215 |
    |*  9 |   TABLE ACCESS FULL   | ASR_GROUP_PRODS         |     1 |    10 |     2 |
    Predicate Information (identified by operation id):
       1 - filter( NOT EXISTS (SELECT /*+ */ 0 FROM "ASR_GROUP_PRODS" "AGP" WHERE
                  ("AGP"."PRODUCT_GROUP"='G176' OR "AGP"."PRODUCT_GROUP"='SR500' OR
                  "AGP"."PRODUCT_GROUP"='SW500') AND ("AGP"."PRODUCT"=:B1 OR "AGP"."PRODUCT"=:B2
                  OR "AGP"."PRODUCT"=:B3 OR "AGP"."PRODUCT"=:B4 OR "AGP"."PRODUCT"=:B5 OR
                  "AGP"."PRODUCT"=:B6 OR "AGP"."PRODUCT"=:B7 OR "AGP"."PRODUCT"=:B8 OR
                  "AGP"."PRODUCT"=:B9 OR "AGP"."PRODUCT"=:B10 OR "AGP"."PRODUCT"=:B11 OR
                  "AGP"."PRODUCT"=:B12 OR "AGP"."PRODUCT"=:B13 OR "AGP"."PRODUCT"=:B14)))
       2 - access("SYS_ALIAS_14"."START_PROD"="ABE"."PRODUCT")
           filter(ABS("AAE"."DISAGGREGATED_AMOUNT"*"ABE"."PERCENTAGE"*"SYS_ALIAS_14".
                  "CHAIN_PERC")>=100)
       3 - access("AB"."BASE_REF"="AAE"."BASE_REF" AND
                  "ABE"."BASE_ID"="AAE"."BASE_ID")
       4 - access("AB"."BASE_ID"="ABE"."BASE_ID")
       5 - filter("AB"."RUN_CODE"='5fax' AND "AB"."BASE_TYPE"='L')
       6 - filter("ABE"."RUN_CODE"='5fax' AND "ABE"."EXHAUST_LEVEL"=1 AND
                  "ABE"."EXHAUST_SUB_LEVEL"=1)
       7 - filter("AAE"."RUN_CODE"='5fax' AND ("AAE"."TRANS_TYPE"='A' OR
                  "AAE"."TRANS_TYPE"='C' OR "AAE"."TRANS_TYPE"='D' OR "AAE"."TRANS_TYPE"='G' OR
                  "AAE"."TRANS_TYPE"='J'))
       8 - filter("SYS_ALIAS_14"."BASE_TYPE"='L' AND "SYS_ALIAS_14"."BUSINESS"='R')
       9 - filter(("AGP"."PRODUCT_GROUP"='G176' OR "AGP"."PRODUCT_GROUP"='SR500' OR
                  "AGP"."PRODUCT_GROUP"='SW500') AND ("AGP"."PRODUCT"=:B1 OR "AGP"."PRODUCT"=:B2
                  OR "AGP"."PRODUCT"=:B3 OR "AGP"."PRODUCT"=:B4 OR "AGP"."PRODUCT"=:B5 OR
                  "AGP"."PRODUCT"=:B6 OR "AGP"."PRODUCT"=:B7 OR "AGP"."PRODUCT"=:B8 OR
                  "AGP"."PRODUCT"=:B9 OR "AGP"."PRODUCT"=:B10 OR "AGP"."PRODUCT"=:B11 OR
                  "AGP"."PRODUCT"=:B12 OR "AGP"."PRODUCT"=:B13 OR "AGP"."PRODUCT"=:B14))
    Note: cpu costing is off
    47 rows selected.

  • Wireless Connection drops after a few moments

    Hello everbody!
    Background: I have a cheap laptop with a windows only ACPI module, so I have to set acpi=off at all times anyway. I tried Ubuntu, which has the wireless problem too, but instead of repairing something bloated like Ubuntu, I now found my way to Arch to make it right from the beginning.
    If the wireless problem gets solved, I want to go on installing the nvdia driver, maybe configure xmonad. (I want to try KDE4 for fun too though, eyecandy you know ) Simple working desktop without getting my laptop heated up like windows does.
    The problem: I set up my wireless connection like the wiki says:
    -The original SSID was "FRITZ!Box Fon WLAN 7270 Annex A" which I tried to escape with \ and using 'ssid'. This wouldn't work at all, if you have any explanation for that I'd love to know it. I changed the SSID to something without spaces and special characters and the connection would work. But it would be nice to change it back to the original.
    -So it works now. Fine, I thought. But the connection drops after a few moments and I have to "killall wpa_supplicant dhcpcd" and start them again to make it work again. For a few moments only. So I went through the logfiles and found error messages which Google wouldn't help me solve on my own. Now I'm asking the Arch specialists here
    Note: Using the partedmagic livecd, the wireless connection works out of the box and absolutely stable. I believe even a bit faster than under windows. So it has to work perfectly, I just don't know how to make it in Arch yet.
    Wireless encryption: WPA2 (CCMP)
    lspci | grep -i net
    00:0a.0 Ethernet controller: nVidia Corporation MCP79 Ethernet (rev b1)
    05:00.0 Network controller: Ralink corp. RT2860
    wpa_supplicant.conf
    ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=wheel
    network={
    ssid="fritztest"
    scan_ssid=1
    proto=RSN
    key_mgmt=WPA-PSK
    pairwise=CCMP TKIP
    group=CCMP TKIP
    psk=Passwort
    starting wpa_supplicant with -dd to show how the connection auths:
    Trying to associate with ma:ca:dr:es:se:bb (SSID='fritztest' freq=2457 MHz)
    Associated with ma:ca:dr:es:se:bb
    WPA: Key negotiation completed with ma:ca:dr:es:se:bb [PTK=CCMP GTK=CCMP]
    CTRL-EVENT-CONNECTED - Connection to ma:ca:dr:es:se:bb completed (auth) [id=0 id_str=]
    CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
    CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
    CTRL-EVENT-TERMINATING - signal 15 received
    lsmod
    Module Size Used by
    usbhid 32582 0
    hid 59859 1 usbhid
    uvcvideo 54388 0
    videodev 34611 1 uvcvideo
    v4l1_compat 13478 2 uvcvideo,videodev
    snd_hda_codec_realtek 186046 1
    joydev 7378 0
    rt2860sta 498204 0
    snd_seq_dummy 1067 0
    snd_seq_oss 24984 0
    snd_seq_midi_event 4484 1 snd_seq_oss
    snd_seq 41656 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
    snd_seq_device 4349 3 snd_seq_dummy,snd_seq_oss,snd_seq
    snd_pcm_oss 33442 0
    snd_mixer_oss 14356 1 snd_pcm_oss
    snd_hda_intel 19249 0
    snd_hda_codec 59723 2 snd_hda_codec_realtek,snd_hda_intel
    snd_hwdep 4752 1 snd_hda_codec
    snd_pcm 57767 3 snd_pcm_oss,snd_hda_intel,snd_hda_codec
    snd_timer 15629 2 snd_seq,snd_pcm
    snd 42562 11 snd_hda_codec_realtek,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
    soundcore 5017 1 snd
    snd_page_alloc 5873 2 snd_hda_intel,snd_pcm
    ohci_hcd 19405 0
    ehci_hcd 31420 0
    usbcore 119796 5 usbhid,uvcvideo,ohci_hcd,ehci_hcd
    i2c_nforce2 4780 0
    i2c_core 14855 2 videodev,i2c_nforce2
    psmouse 50729 0
    shpchp 26528 0
    pci_hotplug 23303 1 shpchp
    sdhci_pci 5466 0
    sdhci 13959 1 sdhci_pci
    mmc_core 45599 1 sdhci
    led_class 1997 1 sdhci
    forcedeth 47287 0
    serio_raw 3618 0
    evdev 6716 0
    pcspkr 1347 0
    sg 20820 0
    rtc_cmos 7546 0
    rtc_core 11851 1 rtc_cmos
    rtc_lib 1482 1 rtc_core
    ext4 302709 1
    mbcache 4278 1 ext4
    jbd2 63651 1 ext4
    crc16 1041 1 ext4
    sd_mod 25215 3
    sr_mod 13097 0
    cdrom 31305 1 sr_mod
    ahci 29826 2
    libata 138071 1 ahci
    scsi_mod 79436 4 sg,sd_mod,sr_mod,libata
    rc.conf
    MOD_AUTOLOAD="yes"
    #MOD_BLACKLIST=() #deprecated
    MODULES=(!rt2800pci !rt61pci !rt2x00pci !rt2800usb !rt2800lib !rt2x00usb !rt2x00lib)
    iwconfig in the few moments the connection works
    wlan0 Ralink STA ESSID:"fritztest" Nickname:"RT2860STA"
    Mode:Managed Frequency=2.457 GHz Access Point: ma:ca:dr:es:se:bb
    Bit Rate=54 Mb/s
    RTS thr:off Fragment thr:off
    Encryption key:some-key
    Link Quality=96/100 Signal level:-56 dBm Noise level:-81 dBm
    Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
    Tx excessive retries:0 Invalid misc:0 Missed beacon:0
    because the wiki says the driver is in the kernel, I also looked at the kernel log which has weird errors:
    Jun 7 02:31:49 arch kernel: <-- RTMPAllocTxRxRingMemory, Status=0
    Jun 7 02:31:49 arch kernel: 1. Phy Mode = 0
    Jun 7 02:31:49 arch kernel: 2. Phy Mode = 0
    Jun 7 02:31:49 arch kernel: RTMPSetPhyMode: channel is out of range, use first channel=1
    Jun 7 02:31:49 arch kernel: 3. Phy Mode = 0
    Jun 7 02:31:49 arch kernel: MCS Set = 00 00 00 00 00
    Jun 7 02:31:49 arch kernel: <==== rt28xx_init, Status=0
    Jun 7 02:31:49 arch kernel: 0x1300 = 00073200
    Jun 7 02:31:55 arch kernel: ===>rt_ioctl_giwscan. 14(14) BSS returned, data->length = 2120
    Jun 7 02:31:55 arch kernel: ==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x8b04] (Channel=1)
    Jun 7 02:32:47 arch kernel: ===>rt_ioctl_giwscan. 13(13) BSS returned, data->length = 1985
    Jun 7 02:32:57 arch kernel: ===>rt_ioctl_giwscan. 13(13) BSS returned, data->length = 1985
    Jun 7 02:33:07 arch kernel: ===>rt_ioctl_giwscan. 13(13) BSS returned, data->length = 1985
    Jun 7 02:33:14 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=1!
    Jun 7 02:33:14 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=2!
    Jun 7 02:33:14 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=3!
    Jun 7 02:33:22 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=4!
    Jun 7 02:33:22 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=5!
    Jun 7 02:33:22 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=6!
    Jun 7 02:33:23 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=7!
    Jun 7 02:33:23 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=8!
    Jun 7 02:33:23 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=9!
    Jun 7 02:33:23 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=10!
    Jun 7 02:33:23 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=11!
    Jun 7 02:33:23 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=12!
    Jun 7 02:33:23 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=13!
    Jun 7 02:33:24 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=14!
    Jun 7 02:33:24 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=15!
    Jun 7 02:33:24 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=16!
    Jun 7 02:33:32 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=17!
    Jun 7 02:33:32 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=18!
    Jun 7 02:33:32 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=19!
    Jun 7 02:33:33 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=20!
    Jun 7 02:33:33 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=21!
    Jun 7 02:33:33 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=22!
    Jun 7 02:33:33 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=23!
    Jun 7 02:33:33 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=24!
    Jun 7 02:33:33 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=25!
    Jun 7 02:33:33 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=26!
    Jun 7 02:33:34 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=27!
    Jun 7 02:33:34 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=28!
    Jun 7 02:33:34 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=29!
    Jun 7 02:33:42 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=30!
    Jun 7 02:33:42 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=31!
    Jun 7 02:33:42 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=32!
    Jun 7 02:33:43 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=33!
    Jun 7 02:33:43 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=34!
    Jun 7 02:33:43 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=35!
    Jun 7 02:33:43 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=36!
    Jun 7 02:33:43 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=37!
    Jun 7 02:33:43 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=38!
    Jun 7 02:33:43 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=39!
    Jun 7 02:33:44 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=40!
    Jun 7 02:33:44 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=41!
    Jun 7 02:33:44 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=42!
    Jun 7 02:33:52 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=43!
    Jun 7 02:33:52 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=44!
    Jun 7 02:33:52 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=45!
    Jun 7 02:33:53 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=46!
    Jun 7 02:33:53 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=47!
    Jun 7 02:33:53 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=48!
    Jun 7 02:33:53 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=49!
    Jun 7 02:33:53 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=50!
    Jun 7 02:33:53 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=51!
    Jun 7 02:33:53 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=52!
    Jun 7 02:33:54 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=53!
    Jun 7 02:33:54 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=54!
    Jun 7 02:33:54 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=55!
    Jun 7 02:34:02 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=56!
    Jun 7 02:34:02 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=57!
    Jun 7 02:34:02 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=58!
    Jun 7 02:34:03 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=59!
    Jun 7 02:34:03 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=60!
    Jun 7 02:34:03 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=61!
    Jun 7 02:34:03 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=62!
    Jun 7 02:34:03 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=63!
    Jun 7 02:34:03 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=64!
    Jun 7 02:34:03 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=65!
    Jun 7 02:34:04 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=66!
    Jun 7 02:34:04 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=67!
    Jun 7 02:34:04 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=68!
    Jun 7 02:34:12 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=69!
    Jun 7 02:34:12 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=70!
    Jun 7 02:34:13 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=71!
    Jun 7 02:34:13 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=72!
    Jun 7 02:34:13 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=73!
    Jun 7 02:34:13 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=74!
    Jun 7 02:34:13 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=75!
    Jun 7 02:34:13 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=76!
    Jun 7 02:34:13 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=77!
    Jun 7 02:34:13 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=78!
    Jun 7 02:34:14 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=79!
    Jun 7 02:34:14 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=80!
    Jun 7 02:34:14 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=81!
    Jun 7 02:34:22 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=82!
    Jun 7 02:34:22 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=83!
    Jun 7 02:34:23 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=84!
    Jun 7 02:34:23 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=85!
    Jun 7 02:34:23 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=86!
    Jun 7 02:34:23 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=87!
    Jun 7 02:34:23 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=88!
    Jun 7 02:34:23 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=89!
    Jun 7 02:34:23 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=90!
    Jun 7 02:34:24 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=91!
    Jun 7 02:34:24 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=92!
    Jun 7 02:34:24 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=93!
    Jun 7 02:34:24 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=94!
    Thanks in advance to anyone helping me! I really really want to get Arch going. It's ideal for this laptop, no wasting of disk space, ressource friendly, the temperature doesn't go up as much with less cpu usage I guess..
    I've written quite a bit, but hopefully this makes it easier for you to help me! I've included all I thought which could be useful.
    Greetings from Germany,
    Fenris

    The easiest solution might be to setup NetCfg somehow with your wifi card and access point.  Have you tried that?  Can you find your card's chipset on the wiki?(chances are that your particular chipset will need a firmware put into /lib/firmware.  Again that's found on the wiki on the NetCfg or Wifi page, I forget which sorry.)  Those are two places where I'd look for good information.
    By the way, your rc.conf is way out of date.  You should look at updating it by using the recent rc.conf.pacnew file that you'll find in the /etc directory.

  • Cme call drop after 3 min

    I have problem in cme9.1 with 8 fxo it was working fine, Before one week incoming call drop after 3 min this is configuration for fxo 
    supervisory disconnect dualtone mid-call
    no battery-reversal
    input gain -3
    output attenuation -3
    echo-cancel coverage 32
    cptone BE
    timeouts initial 5
    timeouts interdigit 3
    timeouts call-disconnect 3
    timeouts ringing 5
    timeouts wait-release 1
    timing hookflash-out 500
    timing guard-out 300
    timing sup-disconnect 50
    connection plar opx xxxx
    impedance complex2
    caller-id enable
    caller-id alerting line-reversal
    caller-id alerting dsp-pre-allocate

    Hello,
    Can you please post the show run and collect the below debug making one test call.
    debug voip ccapi inout
    debug vpm signal
    debug voip vtsp default
    debug voip vtsp session
    debug voip hpi all
    Regards
    Nadeem

Maybe you are looking for

  • Data entry form problem - form in query-only mode

    Hi there, I am trying to create an data entry form to insert recordacross 2 out of 3 tables. The last of the four tables already have details and does not need to have record inserted into. This is the scenario, my four tables are Factory, Employee,

  • SQL Query to return multiple transactions in a 5 min. period

    I have been asked to write a query that scans a table of financial transactions looking for more than 1 transaction by the same person (EmplID for example) within a 5 minute period. I am not sure if this is possible with SQL. Here are the details: Ta

  • Inspection lot not updated with Task list and sample

    Hi, I have created a quality plant and assigned the MICs. When I am trying to Process the quality lot which is created automatically through QA32, I got an error, ,No inspection plan could be found' When i create an inspection lot system is picking u

  • Password program problem.

    I am making a small program using netbeans and seem to be having some problems with the following statement. String password = (txtPassword.getText());     if (password == "test")     lblMessage.setText("Correct"); else     lblMessage.setText("Incorr

  • Modifying the script to include multiple domains

    Hi, The below script will start the servers by connecting to node manager for a particular domain. How can I modify the below script to include multiple servers which are from multiple domains. from java.util import Properties from java.io import Fil