Vpn is not working with manual IP setup in Yosemite

After upgrade to Yosemite, my VPN stops working.
I have tried to switch to another VPN (of my friend's), still no luck.
I tried to use DHCP, rather than manual IP setup, it worked perfectly. It is a pity that my company policy does not allow me to use DHCP.
Is it a bug that has been reported? I tried to google for a while but couldn't find out much info.

I've just wasted 2 HOURS diagnosing non-existent router issues due to this OSX "bug"
Thank you for the workaround. Let's hope they get this resolved soon!

Similar Messages

Sustain pedal not working with my MIDI setup

So, I'm using a Yamaha P-140 hooked up with my Macbook Pro using a Midi-USD cable. I'm mostly using it for Logic Pro X and Sibelius, and it works just fine. However when I use the sustain pedal, it's playing an E3 note and it's messing up all the sound adding a lot of reverb.
Now, this isn't a problem when I'm using the piano as it is. It's also not a problem with either Logic or Sibelius, cause when I'm testing it with the "Sound and MIDI Setup" app on Mac, the sustain pedal is recognized as one of the "hammers" on the keyboard.
I have no idea as how to fix this problem, and it's really annoying having to play super legato when I'm recording.
Thanks in advance.
Note: The keyboard have an "AUX Pedal" input and a "Sustain pedal" input.
USB MIDI Cable specs:
(As written on the package)
- Built-in driver
- USB powered and Class Complaint for true plug & play. Just connect to a computer USB socket for automatic installation of the driver.
- 1 in + 1 out MIDI interface; 16 MIDI input channels & 16 MIDI output channels
- LED's indicate power on, MIDI in signal and MIDI out signal.
- Supports Windows XP, Vista and Mac OS X operating systems
Aditional info:
Now, I've seen the event-recording in Logic for when I use the pedal, and it's picking up 2 different signals. The first one is a "Controller" (as it say under "status") with the info "Sustain", the next 2 have the status "Note" each one triggering an E3.
I looked it up and the pedal is a Yamaha FC3 half damper sustain pedal. I'm not an expert when it come to pedals, but I believe a half damper is a pedal with multiple trigger points? Giving you different amounts of sustain depending on how much you're "pressing it".
(Position 2 1 1 19 = pedal release)

Try deleting Logic's preferences... sounds like a control surface issue.
Delete the Logic 10 preferences file AND the shared control surfaces file.
In the Finder, choose Go > Go to Folder from the menu.
Type ~/Library/Preferences in the "Go to the folder" field.
Press the Go button.
Remove the com.apple.logic10.plist file from the Preferences folder. Note that if you have programmed any custom key commands, this will reset them to the defaults. You may wish to export your custom key command as a preset before performing this step. See the Logic Pro User Manual for details on how to do this.
If you are having trouble with a control surface in Logic Pro.
then delete the com.apple.logic.pro.cs file from the preferences folder.
Note: Delete both files, they will be rebuilt the next time Logic runs.

SL IPSEC VPN Server Not working with Windows 7

I have an airport extreme and a mac mini w/ snow leopard server.
I am able to VPN into my network from my iPhone, MAC 10.6.2, & Windows XP. I am not able to VPN into my network from 2 different Windows 7 machines. I am able to VPN from a laptop running Windows 7 if I am on the LAN but can't vpn from the WAN. Any suggestions?
Tried this: http://support.microsoft.com/kb/947234 and tried this: http://support.microsoft.com/kb/926179/ all to no avail.
I used these instructions to config my windows 7 client:
General Tab:
put your server's address of resolvable name (vpn.yourserver.com)
Security Tab>Advanced>Settings...:
Require encryption ()disconnect if server declines
Microsoft CHAP Version 2 -only thing checked!
Security Tab:
IPSec Settings...
Your share secret - the one you put in the Mac OS X server VPN
Networking Tab:
L2TP IPSec VPN

hi urbancoffy,
boah what a hell....
let's look if there is a cure.....
this device is recognized under every other system than yours, right?
if so maybe your software is misconfigured or your usb connection is bad....
how to determine?
try other devices like an usb-stick
check bios if legacy usb support is on
check device manager (device plugged in) if it shows any information like a //dev_xxxx
if your usb port is ok
goto device manager and remove all usb devices (show hidden devices)
reboot and let the system determine the hub etc
plug in usb-hdd and see if it will be detected - keep in mind: you dont have to load a driver for a usb storage device by yourself
if the usb ports are ok and your hdd is recognized by other systems maybe it's time for a recovery of your system....
Message was edited by: Al-eX

Iphoto not working with upgrade and updated after Yosemite update

We updated to Yosemite last night and this morning I found I can not open my iPhoto. We had a very old version that cost to update so I decided to wait, well when I saw there was a free update I did that, then it said To open your library with this version of iPhoto, it first needs to be prepared. Now when I try to open it it keeps telling me to do the prepared upgrader and I already did, so it only gives me the option to quit or learn more which is where you down load it.

All fixed thanks to the apple support people. It was very hard and many many different ways to get it resolved.

Touch tones not working with FaceTime/Handoff Calls in Yosemite

Has anyone successfully used the new Handoffs feature to call into a conference bridge? I've tried and failed a few times now. I hear the touchtone sounds when I enter the numbers on my keyboard but they are not recognized. One service - GotoMeeting - responds back with "You entered zero numbers".
Here is a number you can try calling. +1 (646) 749-3131
If it is responding back to you with "You entered [the numbers you entered]" then I guess it is just happening to me.
Thanks for your help!
---Marc

Works fine on my MacBook Pro (Retina, 15-inch, Late 2013), and iPhone 6 with iOS 8.1.

Silverlight 5 WebBrowser Control - Is the SL5 WebBrowser control is set to work in IE7 mode only? I have a 3rd party web site i'm hosting and now they will not work with IE 7 Compatibility mode. Looks like this control can't detect I'm setup for IE 9.

Silverlight 5 WebBrowser Control - Is the SL5 WebBrowser control is set to work in IE7 mode only? I have a 3rd party web site I'm hosting and now they will not work with IE 7 Compatibility mode. Looks like this control can't detect I'm setup for IE 9. I'm
running IE 11 with registry hack for IE 9. I think the SL5 webbrowser control is set to work only in IE 7. can some one verify this or tell me how to set the WebBrowser control up to run either IE8, 9, 10 or 11? I have same issue with machines running IE 8
and above. This Silverlight 5 application is running out of browser with the elevated privileges (hack) and at test certificates install in proper stores. This application has been running for 2.5 years. Vender switch on some changes a couple days ago that
broke this application. Help!!

Hi,
It seems there is nothing to do with IE mode.
Please make sure your link still can be accessed.
The WebBrowser displays HTML content in applications running in a Silverlight 4 or later out-of-browser applications or in Silverlight 5 in-browser trusted applications only.
For more infromation,please check link below:
http://msdn.microsoft.com/en-us/library/system.windows.controls.webbrowser(v=vs.95).aspx
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Just bought a new Airport Extreme BS. After setup my iphone4 won't find the network (not even with manual entries), but my iMac (2009) does. What is wrong?

Just bought a new Airport Extreme BS. After setup my iphone4 won't find the network (not even with manual entries), but my iMac (2009) does. What is wrong?

Well, after another call with Apple support and the engineers, no success. After spending over 20 hours trying to debug this, I give up. Apple was basically fishing for a solution with trial-and-error settings on the iphone. Then they wanted me to plug in software to log my iphone connections to the router, etc, etc., etc., at which point I decided I no longer wanted to participate in their testing process and will simply return the router.
25 hours of my life I'll never get back.
Big bummer, and frustrating for all the obvious reasons.

My Time Capsule does not work with existing WiFi

Following a question solved on March 24 by LaPastenague, but gone bad again.
Apple AirPort Time Capsule
I felt the need for a physical backup of my data, as I would not completely trust the different clouds. I use, and have used Dropbox for 4-5 years and are very satisfied with that, but I am still not sure if or when a political lunatic will shut off the internet.
I purchased the Apple AP Time Capsule 2T, because all my other stuff are Apple, and that it's wireless. My old backup is Maxtor 300 GB.
Since we stay 2-3 weeks on two locations, one in Norway and one in Sweden (two different countries) we must use Mobile Broadband 4G, cables or fibre connections are useless for us, and we don't have it up to the houses. I have one mini router for each country, we bring with us iPhones, iPads, iMac, Apple TV, APExpress. When we pass the boarder I change the mini router, and the system continues working perfect on the WiFi, except the APExpress that needs to be reconfigured, but then it works.
The APTC was difficult to make working as it would not accept to be in an existing network, but with good help from the Apple Community, LaPastenague, with forcing the TC connect to the APE with Ethernet cable in bridge mode, ref "My Time Capsule does not work with existing WiFi" from March 24, the problem was solved and all gadgets worked together in a perfect harmony, until we changed location.
Now, as I have my second WiFi network, and the APExspress is reconfigured, it's like the TC thinks, I am the base boss here, I am not taking orders from APE one more time, and it simply does not work, not only that, it fluctuates all the time.
I have a slight feeling that the two WiFi bands are making the trouble as during the configuration of the TC sometime the last figure 6 and 7 pops up, and that has something two do with the two different 2,4 and 5 GHZ bands
So, I am curious if you have any idea ?
I am thinking of returning the TC if I don't make it work now, but how do I delete all the data that's on it?

I can deal with the last question first and easily.
I am thinking of returning the TC if I don't make it work now, but how do I delete all the data that's on it?
Open the airport utility .. go to the disk tab and select erase.
When you select erase you will get mulitiple options.
Quick removes the file table but does not delete the files,, it takes 2min or less.
A Zero out data is the secure way,, by writing 0 ie low level drive format.
It can take several hours..
7 pass will take a week.. not recommended..
35 pass erase is ridiculous.. it would take a month.. put an ax through the TC. It is quick and better.
Now, as I have my second WiFi network, and the APExspress is reconfigured, it's like the TC thinks, I am the base boss here, I am not taking orders from APE one more time, and it simply does not work, not only that, it fluctuates all the time.
The fact that it did work and has now failed might point to faulty unit.
The only way to tell is reset it properly to factory and start over.
Universal Factory Reset.. any model TC or AE.
Unplug your TC/AE from power or turn off at the power point.
Hold in reset. and power the TC/AE back on.. all without releasing reset and keep holding in for about 10sec. (this is often difficult without a 2nd person or a 3rd arm).
Release it when the status light flashes rapidly. If it doesn’t flash rapidly you have missed it and try again.
Note..
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations of the router.
No files are deleted on the hard disk in a TC.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
Generally having multiple wireless AP should not cause problems.. but it is better to set channels manually.. so it doesn't go beserk rotating channels.
Remember to keep all names short, no spaces and pure alphanumeric.
Sadly though the Apple routers have no logging now and no SNMP and almost nothing to help diagnose a problem, so if it continues .. take it back to apple.. they have given you no other method of fixing it.

External USB HD does not work with HAL:

External USB HD does not work with HAL:
From the last 10 days the HAL auto-mount with ntfs-3g file system of my external hard drive does not woks.
But the manual mount procedure with the command mount -t ntfs-3g /dev/sdb* /mnt/XYZ works.
I've followed the instructions in the wiki: http://wiki.archlinux.org/index.php/HAL and the system has worked up to the last kernel or HAL update.
My fat32 usb-stick works without any problem.
If I try to open the device with KDE it appears an error popup wit this message:
TODO: have to rethink extra options
Error: kio_media_mount_helper
The log from the kernel.log is
Nov 6 22:03:16 myhost usb 5-1: new high speed USB device using ehci_hcd and address 4
Nov 6 22:03:16 myhost usb 5-1: configuration #1 chosen from 1 choice
Nov 6 22:03:17 myhost Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Nov 6 22:03:17 myhost ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Nov 6 22:03:17 myhost Initializing USB Mass Storage driver...
Nov 6 22:03:17 myhost scsi6 : SCSI emulation for USB Mass Storage devices
Nov 6 22:03:17 myhost usb-storage: device found at 4
Nov 6 22:03:17 myhost usb-storage: waiting for device to settle before scanning
Nov 6 22:03:17 myhost usbcore: registered new interface driver usb-storage
Nov 6 22:03:17 myhost USB Mass Storage support registered.
Nov 6 22:03:22 myhost scsi 6:0:0:0: Direct-Access WDC WD32 00JB-00KFA0 0811 PQ: 0 ANSI: 0
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Assuming drive cache: write through
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Assuming drive cache: write through
Nov 6 22:03:22 myhost sdb: sdb1
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Attached SCSI disk
Nov 6 22:03:22 myhost sd 6:0:0:0: Attached scsi generic sg2 type 0
Nov 6 22:03:22 myhost usb-storage: device scan complete
and the error.log is
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Assuming drive cache: write through
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Assuming drive cache: write through
Do you have some idea ....
Bye.

I have done the following:
Downloaded the patched hal version.
used makepkg in /abs/local/trunk/ to create a pkg for pacman
used sudo pacman -U pkgname to install it.
used sudo nano /etc/hal/fdi/policy/preferences.fdi to create the fdi file with the following content:
saved the file and removed my ntfs entryes from fstab and rebooted. and still there is no automount off ntfs partitions.
have i done something wrong?
br fjodork
WARNING: what follows is a guide of what did work for me, I'm still in an early stage of learning linux, so please correct me if anything of what follows is wrong/dangerous/stupid. As I said, this worked for me, it's not pretty, since I was learning each step on the fly and I'm sure there are better ways to do this.
So fjodork, you seem to have done the the necessary steps, though i couldn't get it to work until i first removed hal without dependencies
pacman -Rd hal
it will give you some warning about the dependencies, ignore it since we are reinstalling hal in a few steps.
First i tried to follow Raymano's link, obviously it showed me nothing in the browser so I thought it might be a broken link.
So I downloaded the source tarball from here http://hal.freedesktop.org/releases/hal-0.5.10.tar.gz
unpacked it changed the /tools/hal-storage-mount.c as per Milfadoodle's instructions.
at first I tried to compile directly from source, the process would finish without a glitch though after reboot nothing changed, as if hal weren't
installed, i guess there were issues with paths. anyway read on
Then repacked the source in tarball, copied it to /var/abs/extra/system/hal and modified the PKGBUILD as follows
makedepends=('pkgconfig' 'gperf')
options=('!libtool')
install=hal.install
source=(${pkgname}-${pkgver}.tar.gz #removed url so makepkg looks in the current directory for the tarball
hal
hal-policy.patch
cryptsetup_location.patch
hal-0.5.9-hide-diagnostic.patch
ntfs3g-valid-options.patch)
md5sums=('6641c30a27c00485c6accac5110ff911' # replace with md5sum of your package's sourceball (run md5sum filename)
'882f67668cb14a0a9e4a27ef22278027'
'5ba8b610aa9763a5f42b9f7cbd7a86ad'
then makepkg (i had to add --asroot, don't ask why
and finally pacman -U hal-0.5.10-1-i686.pkg
another reboot and everything worked without a glitch!:D (yeah i know i still haven't got rid of the reboot mentality )
I have also put the policy files as per the wiki instructions.
PS: I know this is a dirty way to getting things done but as i said, I'm just starting
If anyone could comment/correct/explain this post I'd be more than happy, the automount issue was bothering me for about a month now (you'll say why do I need ntfs in the first place? well, I only recently switched for Linux as my primary OS, these are some relics of the M$ era

APPLE TV DOES NOT WORK WITH NETFLIX

APPLE TV DOES NOT WORK WITH NETFLIX, just a black screen and "Netflix is loading" message appears. I can´t even see Netflix´s home page or set up my account. Netflix is working fine on all other devices at home, but in Apple TV.
I have tried the 8.8.8.8 DNS trick, the turn off procedure, the manual IP setting, but nothing....black screen still appears

It started working.....!!!!! (It seems someone back there is listening)
I "forced" an upgrade, I mean it showed "AppleTV is updated", nevertheless I re-started the system using the "return to original configurations" option. Then it updated again by itself to a newer version....and started working perfectly.
I have paired my apple wireless keyboard and it works fine, this way is easier to set up passwords or so (you can also do it with your remote).
TIPS:
I didn´t change any language or video quality configuration (scared to do so)
I changed to ethernet (cable) instead of wireless
My internet plan is 6 Megabytes (it was the same while it wasn't working)
good luck!!

I had a repair done on my MacBook Pro and had to have a new hard drive installed. The Apple Auth Repair Shop then updated the OS from 10.6.8 to 10.7.5. Now my iPhoto v 9.2.3 will not open and it sounds like it will not work with this OS. Can you plea

I had a repair done on my MacBook Pro and had to have a new hard drive installed. The Apple Auth Repair Shop then updated the OS from 10.6.8 to 10.7.5. Now my iPhoto v 9.2.3 will not open and it sounds like it will not work with this OS. Can you please advise?

You may need many other updates to retain compatibility with Lion. I suggest you reinstall Snow Leopard. Unfortunately, you will need to erase the drive first. Be sure to backup your data if you haven't done so already.
Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it.
     1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
         with your computer. Insert the disc into the optical drive and restart the computer.
         After the chime press and hold down the "C" key. Release the key when you see
         a small spinning gear appear below the dark gray Apple logo.
     2. After the installer loads select your language and click on the Continue
         button. When the menu bar appears select Disk Utility from the Utilities menu.
         After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
         size.) Click on the Partition tab in the DU main window. Set the number of
         partitions to one (1) from the Partitions drop down menu, click on Options button
         and select GUID, click on OK, then set the format type to MacOS Extended
         (Journaled, if supported), then click on the Apply button.
     3. When the formatting has completed quit DU and return to the installer. Proceed
         with the OS X installation and follow the directions included with the installer.
     4. When the installation has completed your computer will Restart into the Setup
         Assistant. After you finish Setup Assistant will complete the installation after which
         you will be running a fresh install of OS X. You can now begin the update process
         by opening Software Update and installing all recommended updates to bring your
         installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1.

Layout adjustment not working with tables

Hi all
Why will layout adjustment not work with tables?
I am trying to re-format from A4 landscape to A4 portrait.
The text box containing the table will resize but not the table.
Any clues why this might be, I don't want to manually resize every table in the document.
Many thanks,
Rob

Thanks Jongware,
Having resized the table and got the little red ovals, I tried various things like changing the font size etc but the best workaround I found was to select the table and change the cell inset value to 0, this got rid of all red ovals and I didn't need to change the font size.
Cheers,
Rob

After upgrading to Lion internal mic does not work with Facetime

After upgrading to Lion internal mic does not work with Facetime. The mic is picking up sound as noted in System Prefs. This was working just fine before the updgrade. Facetime works OK on my iPod.

you have in french a tutorial to recreate your partition here
Rebuild partition with Recovery HD lion after upgrade to 10.7.2
i tested, it's work !
For your wifi problem:
Try to change your setup of wifi, look this table given by apple:
I changed my wifi setup wep to wpa and it's work !

StarTech Adapter not working with Dell Inspiron 15, model 3521

Side Note: I wrote a reply to a thread that was from 2013. I do apologize because the link was sent to me by my bf and I did not realize how old it was. Since my reply has to be approved I can't delete it.
Current Issue: StarTech Adapter not working with Dell Inspiron 15 model 3521
I bought my Dell laptop last year and at first I did not realize that it had only one audio jack (combo, as the specifications manual says), I only noticed when I was trying to plug in my Ozone Rage ST headset.
I searched online threads and found out that I needed an adapter and most people mentioned Headset Buddy. I couldn't find any adapters for sale in my country (or employees didn't really know what I was talking about) and since Headset Buddy is a bit expensive, I decided to try StarTech Headset adapter for headsets with separate headphone/microphone plugs - 3.5mm 4 position to 2x 3 position 3.5mm M/F www.amazon.com/.../ref=cm_cr_pr_product_top.
It arrived today and let me tell you that I can't make it work. I can hear everything but I can't get the external mic to work or even be detected. I have always used my headset (mostly for gaming) and I prefer to use my external mic rather than the internal one. First I connected my headphone and mic jacks to the adapter and only after that did I connect it to the laptop combo jack. I also tried vice-versa. It didn't work, regardless of the order. I even tried with a different headset and it still didn't work. What else can I do?
I have also found a thread on Dell forums saying that Headset Buddy doesn't even work on Dell Inspiron 15, model 3521. So since it doesn't work and I'm assuming StarTech doesn't, either, what am I to do/buy?! I am getting extremely frustrated and I'm very disappointed with Dell because the brand should have included with the laptop a proper working adapter for these situations and not make its customers buy an extra accessory to make whatever working gear they already had function. It just doesn't make sense to me! Either make the changes work properly or simply don't touch anything. I spent some of my savings on this laptop which, overall, is great but now I am being forced to spend more on an item to allow me to use my headset. I am running out of options here and even Dell can't seem to tell its customers with 100% certainty what really works for this specific model.
If I can't make the adapter work, I just hope I can return it, otherwise I'll end up with no refund and with a piece of equipment I have no other use for!
Any thoughts?

Hi,
Thanks for your reply.
This is the first time I was forced to buy adapters such as these so I don't know if I'm doing something wrong or if there's anything else I can do to make it work. When I plug the adapter to my Dell, the laptop presents me with several options such as: headphones, headphone, speakers, skull candy headphones, etc (maybe some may have different names but since I see them in Portuguese, I'm not quite sure how they appear for someone who has the computer in English), I have picked different options and it still doesn't work, the only noticeable changes are sound quality related, I guess.

Flash Player 11.3.300.262 Not working with Firefox. I think I found the problem.

*Flash Player 11.3.300.262 is not working with Firefox. I think I found the problem.*
Millions of people got off work & turned on there computers recently to discover that Firefox is not playing any videos or flash content. Just like me, millions of people are randomly searching the internet in a futile & frustrating attempt at answers. Unfortunately, many of those people will simply stop using firefox & deem it a glitchy, unreliable browser.
This happened to me a couple days ago. I started up my computer & got a pop-up from Adobe saying that I need to update my flash player to 11.3.300.262. I've always thought of adobe as being a reliable software company, so I clicked on it with confidence that things will be working even smoother. To my horror, I relalized that right after the update, my main browser, firefox was destroyed. Then I went on the frustrating process of uninstalling, re-installing, running virus scan, researching the internet like a lost child. I said to myself, "that's why I hate updating stuff, because updates always seem to change stuff you don't want it to change & there always seems to be a problem with the updates." I usualy update software months after it releases, because microsoft & all the other software companies always seem not to test there stuff properly before releasing them. Then we have to look at a glitchy computer until the next update fixes it. Well, that is my rant. Now let me discuss the problem I found.
Problem:
What I did was, go into my firefox extentions menu & I disabled the 11.3.300.262 & I re-enabled the previous flash player. After that, everything worked perfect again. Then a today (a week later), I turned on my computer & my firefox wasn't playing any videos or flash content again. I went into my firefox extenions menu again, & I discovered that my old flash player had been deleted, & this new glitchy 11.3.300.262 had been enabled. Why did adobe feel the need to into my computer & automaticly delete & update my flash player. Now it doesn't work. THIS IS REALY FRUSTRATING!
The Issue I discovered:
"RealPlayer" is the most popular video program & it is installed on millions of computers. For some strange reason Firefox does not want its users to use Real Player. Specifically the RealPlayer Browser Record Plugin 15.0.2. I also discovered that my Browser Record Plugin 15.0.2 was automatically disabled when the Adobe 11.3.300.262 was automatically updated also.
- Maybe this could be because of some copyright conspiracy to keep people from downloading videos from the web.
- Maybe firefox wants people to use there download add-on instead of RealPlayers downloader.
I don't know what ther reason is. But what I do know is Nobody is going to delete there RealPlayer from there computer just to use FireFox. We can simply use Chrome or Internet explorer. I took the advise from Adobe & disabled the FireFox RealPlayer Extention. I also went into my RealPlayer preferences options, But there was no option to disable download recording from FireFox. BECAUSE I ALREADY DISABLED THE ADD-ON in FireFoxes menu.
Solution:
Step 1: Adobe needs to update all the computers with the previous flash player. That way we can choose to enable the previous flash player in our FireFox. or wait until a new update fixes the problem with firefox.
Step 2: Adobe & FireFox need to get together & go back to the drawing board. They need to create a update that actually works on computers that have Real Player installed on them. I don't care which company does the update. All I care about is if it works. Thank You.
Oh yea, Im running FireFox 13.0.1, Windows 7, HP computer, Real Player is up to date.

Hey Chris,
I was able to duplicate this issue on my Windows 7 laptop as follows:
     1) Completely uninstall FlashPlayer (using your tool) as well as Mozilla Firefox and Mozilla Maintenance Service (used Windows 7 - uninstall from Control Panel). Please note that I checked the box that said "Remove my Firefox personal data and customizations" to ensure that Firefox was completely gone from my laptop.
     2) I then went out to the Firefox website and downloaded the "Firefox Setup 13.0.1.exe" app to my laptop. I ran this app to install Firefox.
     3) I then went to the following website http://www.ishmael.org.uk/karaoke02.php as I know that this URL uses Flash Player (obviously you can go to any URL that uses Flash Player - I'm just letting you know which one I used). I then clicked on the icon on this page to install Flash Player.
Once the install was completed, the URL stops responding and appears to be locked up (although it will occassionally hiccup and display portions of the page and then lock up again). You will eventually get a pop-up notice from Firefox that has the header "Warning: Unresponsive script" and says the following:
     A script on this page may be busy or it may have stopped responding. You can stop the script now, or you can continue to to see of the script will complete. Script: chrome://browser/content/browser.js:6551
Selecting "Stop script" will get Firefox working until you hit another page that uses Flash Player.
To ensure that the above URL is not the culprit, I used one from your website http://helpx.adobe.com/flash-player/kb/find-version-flash-player.html and had the same results.
Hope this info helps!
Jeff
NOTE: As a reminder, I do not have RealPlayer installed on my laptop (and never have had it installed)

Vpn is not working with manual IP setup in Yosemite

Similar Messages

Maybe you are looking for