VPN Issue in windows-10

We are using ARCOT VPN & IRAS client for connection, but after I installed the application the client connection is not happening.
The version am using in win-8.1 same am using in this win-10 version but it is not connecting to IRAS. Is there any solution for this..
Reg
Lokesh SG

Hi Lokesh,
We can try to run the application in compatibility mode to have a check but I cannot guarantee it will work .
As the Windows 10 is for testing by now ,there may be a compatibility issue here .We may need to wait for the application developer to release a version that is compatible well with the Windows 10 .
Further, if you have any suggestions or issues when using Windows 10 Technical Preview, please take use of Windows Feedback Tool:
Updates and feedback
Best regards  

Similar Messages

  • Cisco VPN issues on Windows 7 bootcamp

    Cisco vpn client does not work properly with bootcamp, I can connect and authenticate and bring up the tunnel but cannot access anything through the tunnel, if I look at the Cisco VPN client statistics, all the packets are being discarded.
    anyone had the same issue?

    Same issue here, Windows 8 Pro 64bit, eToken (Aladdin) Pro (V.with Cisco Systems VPN Client Version 5.0.07.0440 -> VPN Error-Log :
    20     12:59:24.194  08/14/13  Sev=Warning/2      CERT/0xA3600383
    Could not load certificate cn=uxyz (VPN),ou=VPN,o=uxyz GmbH,st=Germany,c=DE from store Microsoft User Certificate. Reason: store empty
    21     12:59:24.195  08/14/13  Sev=Warning/2      CERT/0xA3600456
    If you are using a smartcard or token containing a certificate, verify that it is plugged in and try again.
    22     12:59:24.195  08/14/13  Sev=Warning/2      IKE/0xE3000234
    Unable to open certificate (cn=uxyz (VPN),ou=VPN,o=xyz GmbH,st=Germany,c=DE).
    If you are using a smartcard or token containing a certificate, verify the correct one is plugged in and try again.
    VPN-Client Responding : Error 403
    Thanks in advance for any ideas or solution !!

  • Windows VPN issue

    Hi.
    I recently was able to set up a Windows machine to be used as a VPN Server using windows vpn. I port forwarded 1723 from the modem to the router. The modem has a static ip going towards the internet.
    I am able to log into the VPN Server from the outside, however I loose internet connection when I do (Which i solved by unchecking the use default gateway box in the connection properties) but I am still not able to access any of the network folders that
    I need to see in the VPN Server. Can someone help me out so that I can set the windows vpn up correctly? To summarize, I am already connected to the VPN Server but I can't see any network folders using the UNC path of the folder
    When i look at the connected users status network properties in adapter settings, for say USER1. In status, it says that ipv4 connectivity is not connected and the details are empty.
    Please help me out! Thank you alot!

    Hi,
    That depends on your requirements, if you need more than one VPN connections, we might consider configure the VPN server on Windows Server OS editions, and you may also check to see if any 3rd-party VPN would suit your requirements.
    Besides, if we configured the incoming connections in Windows client, make sure we have the three options selected:
    For network sharing files and printers, make sure we have the file and printer sharing for Microsoft Networks selected. Also make sure the client for Microsoft Networks is configured well on the client side.
    More reference:
    Configure Incoming Connections
    Best regards
    Michael Shao
    TechNet Community Support

  • Any ideas how to better troubleshoot VPN issue?

    Hi,
    I've recently upgraded my WLAN router to a brand new AVM FRITZ!Box WLAN 7390, in part for its VPN capabilities.
    So far, I've been unable to create a working connection.
    AVM's VPN is based on Cisco IPSec, and they provide a step-by-step procedure on how configure a Mac-based VPN connection (http://www.avm.de/de/Service/Service-Portale/Service-Portal/VPN_Interoperabilita et/16206.php - unfortunately only available in German, sorry). Following it, I still can't get it to work. Contacting their support I got first the same procedure and after pointing out I already followed it a "we don't support other vendors".
    Funny enough, I got a second VPN connection to my work's VPN server just fine, though admittedly there we have a true Cisco box.
    My initial setup was based on a 192.x.x.x net on my AVM, I could establish a VPN connection but coudn't ping/ssh/http/you-name-the-protocol in either direction. Our companies net is a 10.x.x.x net so, and as I have also VMware fusion running on my Mac with DHCP enabled on a different 192.x.x.x net plus a third 192.x.x.x net from my Wifi access I decided to reconfigure my AVM net to a 172.x.x.x net and stop VMware services for the tests (ie simplify as much as I could to help troubleshoot).
    Alas, instead of being able to establish a non-working VPN connection, now I ain't able to get the tunnel up. IKE Phase 1 completes but Phase 2 doesn't.
    Here's the relevant section from kernel.log:
    Dec 30 11:47:57 jupiter configd[16]: IPSec connecting to server <myservernameismybusiness>.dyndns.info
    Dec 30 11:47:57 jupiter configd[16]: SCNC: start, triggered by SystemUIServer, type IPSec, status 0
    Dec 30 11:47:57 jupiter configd[16]: IPSec Phase1 starting.
    Dec 30 11:47:57 jupiter racoon[1910]: IPSec connecting to server 77.x.x.x
    Dec 30 11:47:57 jupiter racoon[1910]: Connecting.
    Dec 30 11:47:57 jupiter racoon[1910]: IPSec Phase1 started (Initiated by me).
    Dec 30 11:47:57 jupiter racoon[1910]: IKE Packet: transmit success. (Initiator, Aggressive-Mode message 1).
    Dec 30 11:47:58 jupiter racoon[1910]: IKEv1 Phase1 AUTH: success. (Initiator, Aggressive-Mode Message 2).
    Dec 30 11:47:58 jupiter racoon[1910]: IKE Packet: receive success. (Initiator, Aggressive-Mode message 2).
    Dec 30 11:47:58 jupiter racoon[1910]: IKEv1 Phase1 Initiator: success. (Initiator, Aggressive-Mode).
    Dec 30 11:47:58 jupiter racoon[1910]: IKE Packet: transmit success. (Initiator, Aggressive-Mode message 3).
    Dec 30 11:47:58 jupiter racoon[1910]: IKE Packet: transmit success. (Information message).
    Dec 30 11:47:58 jupiter racoon[1910]: IKEv1 Information-Notice: transmit success. (ISAKMP-SA).
    Dec 30 11:47:58 jupiter racoon[1910]: IPSec Phase1 established (Initiated by me).
    Dec 30 11:47:58 jupiter racoon[1910]: IPSec Extended Authentication requested.
    Dec 30 11:47:58 jupiter configd[16]: IPSec requesting Extended Authentication.
    Dec 30 11:48:01 jupiter configd[16]: IPSec sending Extended Authentication.
    Dec 30 11:48:01 jupiter racoon[1910]: IKE Packet: transmit success. (Mode-Config message).
    Dec 30 11:48:01 jupiter racoon[1910]: IPSec Extended Authentication sent.
    Dec 30 11:48:02 jupiter racoon[1910]: IKEv1 XAUTH: success. (XAUTH Status is OK).
    Dec 30 11:48:02 jupiter racoon[1910]: IPSec Extended Authentication Passed.
    Dec 30 11:48:02 jupiter racoon[1910]: IKE Packet: transmit success. (Mode-Config message).
    Dec 30 11:48:02 jupiter racoon[1910]: IKEv1 Config: retransmited. (Mode-Config retransmit).
    Dec 30 11:48:02 jupiter racoon[1910]: IPSec Network Configuration requested.
    Dec 30 11:48:03 jupiter racoon[1910]: IPSec Network Configuration established.
    Dec 30 11:48:03 jupiter racoon[1910]: IKE Packet: receive success. (MODE-Config).
    Dec 30 11:48:03 jupiter configd[16]: IPSec Network Configuration started.
    Dec 30 11:48:03 jupiter configd[16]: IPSec Network Configuration: INTERNAL-IP4-ADDRESS = 172.77.7.14.
    Dec 30 11:48:03 jupiter configd[16]: IPSec Network Configuration: SAVE-PASSWORD = 1.
    Dec 30 11:48:03 jupiter configd[16]: IPSec Network Configuration: DEFAULT-ROUTE = local-address 172.77.7.14/32.
    Dec 30 11:48:03 jupiter configd[16]: host_gateway: write routing socket failed, command 2, No such process
    Dec 30 11:48:03 jupiter configd[16]: IPSec Phase2 starting.
    Dec 30 11:48:03 jupiter configd[16]: IPSec Network Configuration established.
    Dec 30 11:48:03 jupiter configd[16]: IPSec Phase1 established.
    Dec 30 11:48:03 jupiter configd[16]: event_callback: Address added. previous interface setting (name: en1, address: 192.168.43.242), current interface setting (name: utun0, family: 1001, address: 172.77.7.14, subnet: 255.255.255.255, destination: 172.77.7.14).
    Dec 30 11:48:03 jupiter racoon[1910]: IPSec Phase2 started (Initiated by me).
    Dec 30 11:48:03 jupiter racoon[1910]: IKE Packet: transmit success. (Initiator, Quick-Mode message 1).
    Dec 30 11:48:03 jupiter configd[16]: network configuration changed.
    Dec 30 11:48:03 jupiter configd[16]: IPSec port-mapping update for en1 ignored: VPN is the Primary interface. Public Address: ac4d070e, Protocol: None, Private Port: 0, Public Port: 0
    Dec 30 11:48:03 jupiter configd[16]:
    Dec 30 11:48:03 jupiter configd[16]: setting hostname to "jupiter.local"
    Dec 30 11:48:03 jupiter racoon[1910]: IKE Packet: receive success. (Information message).
    Dec 30 11:48:06 jupiter racoon[1910]: IKE Packet: transmit success. (Phase2 Retransmit).
    Dec 30 11:48:07 jupiter racoon[1910]: IKE Packet: receive success. (Information message).
    Dec 30 11:48:09 jupiter racoon[1910]: IKE Packet: transmit success. (Phase2 Retransmit).
    Dec 30 11:48:09 jupiter racoon[1910]: IKE Packet: receive success. (Information message).
    Dec 30 11:48:12 jupiter racoon[1910]: IKE Packet: transmit success. (Phase2 Retransmit).
    Dec 30 11:48:13 jupiter racoon[1910]: IKE Packet: receive success. (Information message).
    Dec 30 11:48:15 jupiter racoon[1910]: IKE Packet: transmit success. (Phase2 Retransmit).
    Dec 30 11:48:15 jupiter racoon[1910]: IKE Packet: receive success. (Information message).
    Dec 30 11:48:18 jupiter racoon[1910]: IKE Packet: transmit success. (Phase2 Retransmit).
    Dec 30 11:48:18 jupiter racoon[1910]: IKE Packet: receive success. (Information message).
    Dec 30 11:48:21 jupiter racoon[1910]: IKE Packet: transmit success. (Phase2 Retransmit).
    Dec 30 11:48:21 jupiter racoon[1910]: IKE Packet: receive success. (Information message).
    Dec 30 11:48:24 jupiter racoon[1910]: IKE Packet: transmit success. (Phase2 Retransmit).
    Dec 30 11:48:25 jupiter racoon[1910]: IKE Packet: receive success. (Information message).
    Dec 30 11:48:27 jupiter racoon[1910]: IKE Packet: transmit success. (Phase2 Retransmit).
    Dec 30 11:48:27 jupiter racoon[1910]: IKE Packet: receive success. (Information message).
    Dec 30 11:48:30 jupiter racoon[1910]: IKE Packet: transmit success. (Phase2 Retransmit).
    Dec 30 11:48:30 jupiter racoon[1910]: IKE Packet: receive success. (Information message).
    Dec 30 11:48:33 jupiter configd[16]: IPSec disconnecting from server 77.x.x.x
    Dec 30 11:48:33 jupiter racoon[1910]: IPSec disconnecting from server 77.x.x.x
    Dec 30 11:48:33 jupiter racoon[1910]: IKE Packet: transmit success. (Information message).
    Dec 30 11:48:33 jupiter racoon[1910]: IKEv1 Information-Notice: transmit success. (Delete ISAKMP-SA).
    Dec 30 11:48:33 jupiter configd[16]: SCNC Controller: service_ending_verify_primaryservice, waiting for PrimaryService. status = 1
    Dec 30 11:48:33 jupiter configd[16]:
    Dec 30 11:48:33 jupiter configd[16]: network configuration changed.
    Dec 30 11:48:33 jupiter configd[16]: SCNC Controller: ipv4_state_changed, done waiting for ServiceID.
    Dec 30 11:48:33 jupiter configd[16]:
    Dec 30 11:48:33 jupiter configd[16]: setting hostname to "jupiter"
    When connecting to my work-place it looks like:
    Dec 30 12:33:14 jupiter configd[16]: IPSec connecting to server <mycompanyismybusiness>.ch
    Dec 30 12:33:14 jupiter configd[16]: SCNC: start, triggered by SystemUIServer, type IPSec, status 0
    Dec 30 12:33:14 jupiter configd[16]: IPSec Phase1 starting.
    Dec 30 12:33:14 jupiter racoon[1976]: IPSec connecting to server 62.x.x.x
    Dec 30 12:33:14 jupiter racoon[1976]: Connecting.
    Dec 30 12:33:14 jupiter racoon[1976]: IPSec Phase1 started (Initiated by me).
    Dec 30 12:33:14 jupiter racoon[1976]: IKE Packet: transmit success. (Initiator, Aggressive-Mode message 1).
    Dec 30 12:33:14 jupiter racoon[1976]: IKEv1 Phase1 AUTH: success. (Initiator, Aggressive-Mode Message 2).
    Dec 30 12:33:14 jupiter racoon[1976]: IKE Packet: receive success. (Initiator, Aggressive-Mode message 2).
    Dec 30 12:33:14 jupiter racoon[1976]: IKEv1 Phase1 Initiator: success. (Initiator, Aggressive-Mode).
    Dec 30 12:33:14 jupiter racoon[1976]: IKE Packet: transmit success. (Initiator, Aggressive-Mode message 3).
    Dec 30 12:33:14 jupiter racoon[1976]: IPSec Phase1 established (Initiated by me).
    Dec 30 12:33:15 jupiter racoon[1976]: IPSec Extended Authentication requested.
    Dec 30 12:33:15 jupiter configd[16]: IPSec requesting Extended Authentication.
    Dec 30 12:33:21 jupiter configd[16]: IPSec sending Extended Authentication.
    Dec 30 12:33:21 jupiter racoon[1976]: IKE Packet: transmit success. (Mode-Config message).
    Dec 30 12:33:21 jupiter racoon[1976]: IPSec Extended Authentication sent.
    Dec 30 12:33:21 jupiter racoon[1976]: IKEv1 XAUTH: success. (XAUTH Status is OK).
    Dec 30 12:33:21 jupiter racoon[1976]: IPSec Extended Authentication Passed.
    Dec 30 12:33:21 jupiter racoon[1976]: IKE Packet: transmit success. (Mode-Config message).
    Dec 30 12:33:21 jupiter racoon[1976]: IKEv1 Config: retransmited. (Mode-Config retransmit).
    Dec 30 12:33:21 jupiter racoon[1976]: IPSec Network Configuration requested.
    Dec 30 12:33:21 jupiter racoon[1976]: IPSec Network Configuration established.
    Dec 30 12:33:21 jupiter racoon[1976]: IKE Packet: receive success. (MODE-Config).
    Dec 30 12:33:21 jupiter configd[16]: IPSec Network Configuration started.
    Dec 30 12:33:21 jupiter configd[16]: IPSec Network Configuration: INTERNAL-IP4-ADDRESS = 10.100.1.18.
    Dec 30 12:33:21 jupiter configd[16]: IPSec Network Configuration: INTERNAL-IP4-MASK = 255.255.255.0.
    Dec 30 12:33:21 jupiter configd[16]: IPSec Network Configuration: SAVE-PASSWORD = 1.
    Dec 30 12:33:21 jupiter configd[16]: IPSec Network Configuration: INTERNAL-IP4-DNS = 10.100.1.129.
    Dec 30 12:33:21 jupiter configd[16]: IPSec Network Configuration: SPLIT-INCLUDE.
    Dec 30 12:33:21 jupiter configd[16]: IPSec Network Configuration: DEF-DOMAIN = iw.local.
    Dec 30 12:33:21 jupiter configd[16]: host_gateway: write routing socket failed, command 2, No such process
    Dec 30 12:33:21 jupiter configd[16]: installed route: (address 10.100.1.0, gateway 10.100.1.18)
    Dec 30 12:33:21 jupiter configd[16]: IPSec Phase2 starting.
    Dec 30 12:33:21 jupiter racoon[1976]: IPSec Phase2 started (Initiated by me).
    Dec 30 12:33:21 jupiter racoon[1976]: IKE Packet: transmit success. (Initiator, Quick-Mode message 1).
    Dec 30 12:33:21 jupiter configd[16]: IPSec Network Configuration established.
    Dec 30 12:33:21 jupiter configd[16]: IPSec Phase1 established.
    Dec 30 12:33:21 jupiter configd[16]: event_callback: Address added. previous interface setting (name: en1, address: 192.168.43.242), current interface setting (name: utun0, family: 1001, address: 10.100.1.18, subnet: 255.255.255.0, destination: 10.100.1.18).
    Dec 30 12:33:21 jupiter configd[16]: network configuration changed.
    Dec 30 12:33:21 jupiter racoon[1976]: IKE Packet: receive success. (Initiator, Quick-Mode message 2).
    Dec 30 12:33:21 jupiter racoon[1976]: IKE Packet: transmit success. (Initiator, Quick-Mode message 3).
    Dec 30 12:33:21 jupiter racoon[1976]: IKEv1 Phase2 Initiator: success. (Initiator, Quick-Mode).
    Dec 30 12:33:21 jupiter racoon[1976]: IPSec Phase2 established (Initiated by me).
    Dec 30 12:33:21 jupiter configd[16]: IPSec Phase2 established.
    An earlies test in a Starbucks around here had the same result, during looking at the netstat -nr output I found I got onto a 10.x.x.x net on the Wifi and still could connect to the (different) 10.x.x.x net at work.
    My TCP/IP Networking course was around 2000, but the default route seen in the non-working log section looks like bullsh*t to me anyhow: DEFAULT-ROUTE = local-address 172.77.7.14/32
    On the other hand, the Phase 2 message seem to indicate a different mode for Phase 2 between the working and the non-working one.
    This is from the exported config of my AVM box:
    **** CFGFILE:vpn.cfg
    * /var/flash/vpn.cfg
    * Wed Dec 28 16:01:09 2011
    vpncfg {
            connections {
                    enabled = yes;
                    conn_type = conntype_user;
                    name = "[email protected]";
                    always_renew = no;
                    reject_not_encrypted = no;
                    dont_filter_netbios = yes;
                    localip = 0.0.0.0;
                    local_virtualip = 0.0.0.0;
                    remoteip = 0.0.0.0;
                    remote_virtualip = 172.77.7.14;
                    remoteid {
                            key_id = "<mykeyismybusiness>";
                    mode = phase1_mode_aggressive;
                    phase1ss = "all/all/all";
                    keytype = connkeytype_pre_shared;
                    key = "<mykeyismybusiness>";
                    cert_do_server_auth = no;
                    use_nat_t = no;
                    use_xauth = yes;
                    xauth {
                            valid = yes;
                            username = "<myuserismybusiness>";
                            passwd = "<mypasswordismybusiness>";
                    use_cfgmode = no;
                    phase2localid {
                            ipnet {
                                    ipaddr = 0.0.0.0;
                                    mask = 0.0.0.0;
                    phase2remoteid {
                            ipaddr = 172.22.7.14;
                    phase2ss = "esp-all-all/ah-none/comp-all/no-pfs";
                    accesslist =
                                 "permit ip 172.22.7.0 255.255.255.240 172.22.7.14 255.255.255.255";
            ike_forward_rules = "udp 0.0.0.0:500 0.0.0.0:500",
                                "udp 0.0.0.0:4500 0.0.0.0:4500";
    // EOF
    **** END OF FILE ****
    I also noticed an extra "IPSec port-mapping update for en1 ignored" message in the non-working log section, but I'm not sure a) how significant that might be, and b) how to find out what the ignored update might have been to decide whether not ignoring it would help.
    A quick test with the AnyConnect Client from Cisco didn't help either, apparently it establishes an https connection first as I got a window which certificate details from my QNAP behind the AVM Box (I got a port forward for https to it)
    So I'm looking for any ideas how to better troubleshoot this VPN issue...
    Many thanks in advance!
    BR,
    Alex

    Ok, found a small typo in my config (had at one point a 172.77.7.14 instead of the 172.22.7.14), no I can also connect from the 172.x.x.x net but still no ping etc. The relevant section of the log looks now like this:
    Dec 30 16:44:27 jupiter configd[16]: IPSec connecting to server <myservernameismybusiness>.dyndns.info
    Dec 30 16:44:27 jupiter configd[16]: SCNC: start, triggered by SystemUIServer, type IPSec, status 0
    Dec 30 16:44:28 jupiter configd[16]: IPSec Phase1 starting.
    Dec 30 16:44:28 jupiter racoon[2183]: IPSec connecting to server 77.x.x.x
    Dec 30 16:44:28 jupiter racoon[2183]: Connecting.
    Dec 30 16:44:28 jupiter racoon[2183]: IPSec Phase1 started (Initiated by me).
    Dec 30 16:44:28 jupiter racoon[2183]: IKE Packet: transmit success. (Initiator, Aggressive-Mode message 1).
    Dec 30 16:44:28 jupiter racoon[2183]: IKEv1 Phase1 AUTH: success. (Initiator, Aggressive-Mode Message 2).
    Dec 30 16:44:28 jupiter racoon[2183]: IKE Packet: receive success. (Initiator, Aggressive-Mode message 2).
    Dec 30 16:44:28 jupiter racoon[2183]: IKEv1 Phase1 Initiator: success. (Initiator, Aggressive-Mode).
    Dec 30 16:44:28 jupiter racoon[2183]: IKE Packet: transmit success. (Initiator, Aggressive-Mode message 3).
    Dec 30 16:44:28 jupiter racoon[2183]: IKE Packet: transmit success. (Information message).
    Dec 30 16:44:28 jupiter racoon[2183]: IKEv1 Information-Notice: transmit success. (ISAKMP-SA).
    Dec 30 16:44:28 jupiter racoon[2183]: IPSec Phase1 established (Initiated by me).
    Dec 30 16:44:28 jupiter racoon[2183]: IPSec Extended Authentication requested.
    Dec 30 16:44:28 jupiter configd[16]: IPSec requesting Extended Authentication.
    Dec 30 16:44:31 jupiter configd[16]: IPSec sending Extended Authentication.
    Dec 30 16:44:31 jupiter racoon[2183]: IKE Packet: transmit success. (Mode-Config message).
    Dec 30 16:44:31 jupiter racoon[2183]: IPSec Extended Authentication sent.
    Dec 30 16:44:32 jupiter racoon[2183]: IKEv1 XAUTH: success. (XAUTH Status is OK).
    Dec 30 16:44:32 jupiter racoon[2183]: IPSec Extended Authentication Passed.
    Dec 30 16:44:32 jupiter racoon[2183]: IKE Packet: transmit success. (Mode-Config message).
    Dec 30 16:44:32 jupiter racoon[2183]: IKEv1 Config: retransmited. (Mode-Config retransmit).
    Dec 30 16:44:32 jupiter racoon[2183]: IPSec Network Configuration requested.
    Dec 30 16:44:33 jupiter racoon[2183]: IPSec Network Configuration established.
    Dec 30 16:44:33 jupiter racoon[2183]: IKE Packet: receive success. (MODE-Config).
    Dec 30 16:44:33 jupiter configd[16]: IPSec Network Configuration started.
    Dec 30 16:44:33 jupiter configd[16]: IPSec Network Configuration: INTERNAL-IP4-ADDRESS = 172.22.7.14.
    Dec 30 16:44:33 jupiter configd[16]: IPSec Network Configuration: SAVE-PASSWORD = 1.
    Dec 30 16:44:33 jupiter configd[16]: IPSec Network Configuration: INTERNAL-IP4-DNS = 172.22.7.1.
    Dec 30 16:44:33 jupiter configd[16]: IPSec Network Configuration: DEFAULT-ROUTE = local-address 172.22.7.14/32.
    Dec 30 16:44:33 jupiter configd[16]: host_gateway: write routing socket failed, command 2, No such process
    Dec 30 16:44:33 jupiter configd[16]: IPSec Phase2 starting.
    Dec 30 16:44:33 jupiter racoon[2183]: IPSec Phase2 started (Initiated by me).
    Dec 30 16:44:33 jupiter racoon[2183]: IKE Packet: transmit success. (Initiator, Quick-Mode message 1).
    Dec 30 16:44:33 jupiter configd[16]: IPSec Network Configuration established.
    Dec 30 16:44:33 jupiter configd[16]: IPSec Phase1 established.
    Dec 30 16:44:33 jupiter configd[16]: event_callback: Address added. previous interface setting (name: en1, address: 192.168.43.242), current interface setting (name: utun0, family: 1001, address: 172.22.7.14, subnet: 255.255.255.255, destination: 172.22.7.14).
    Dec 30 16:44:33 jupiter configd[16]: network configuration changed.
    Dec 30 16:44:33 jupiter racoon[2183]: IKE Packet: receive success. (Initiator, Quick-Mode message 2).
    Dec 30 16:44:33 jupiter racoon[2183]: IKE Packet: transmit success. (Initiator, Quick-Mode message 3).
    Dec 30 16:44:33 jupiter racoon[2183]: IKEv1 Phase2 Initiator: success. (Initiator, Quick-Mode).
    Dec 30 16:44:33 jupiter racoon[2183]: IPSec Phase2 established (Initiated by me).
    Dec 30 16:44:33 jupiter configd[16]: IPSec Phase2 established.
    Dec 30 16:44:43 jupiter racoon[2183]: IKE Packet: receive failed. (MODE-Config).
    Dec 30 16:44:48 jupiter racoon[2183]: IKE Packet: transmit success. (Information message).
    Dec 30 16:44:48 jupiter racoon[2183]: IKEv1 Information-Notice: transmit success. (R-U-THERE?).
    Dec 30 16:44:48 jupiter racoon[2183]: IKEv1 Dead-Peer-Detection: request transmitted. (Initiator DPD Request).
    Dec 30 16:44:48 jupiter racoon[2183]: IKEv1 Dead-Peer-Detection: response received. (Initiator DPD Response).
    Dec 30 16:44:48 jupiter racoon[2183]: IKE Packet: receive success. (Information message).
    Dec 30 16:45:03 jupiter configd[16]: setting hostname to "jupiter.local"
    followed by lots of:
    Dec 30 16:45:03 jupiter racoon[2183]: IKE Packet: receive failed. (MODE-Config).
    Dec 30 16:45:08 jupiter racoon[2183]: IKE Packet: transmit success. (Information message).
    Dec 30 16:45:08 jupiter racoon[2183]: IKEv1 Information-Notice: transmit success. (R-U-THERE?).
    Dec 30 16:45:08 jupiter racoon[2183]: IKEv1 Dead-Peer-Detection: request transmitted. (Initiator DPD Request).
    Dec 30 16:45:08 jupiter racoon[2183]: IKEv1 Dead-Peer-Detection: response received. (Initiator DPD Response).
    Dec 30 16:45:08 jupiter racoon[2183]: IKE Packet: receive success. (Information message).
    Dec 30 16:45:28 jupiter racoon[2183]: IKE Packet: transmit success. (Information message).
    Dec 30 16:45:28 jupiter racoon[2183]: IKEv1 Information-Notice: transmit success. (R-U-THERE?).
    Dec 30 16:45:28 jupiter racoon[2183]: IKEv1 Dead-Peer-Detection: request transmitted. (Initiator DPD Request).
    Dec 30 16:45:29 jupiter racoon[2183]: IKEv1 Dead-Peer-Detection: response received. (Initiator DPD Response).
    Dec 30 16:45:29 jupiter racoon[2183]: IKE Packet: receive success. (Information message).
    Dec 30 16:45:49 jupiter racoon[2183]: IKE Packet: transmit success. (Information message).
    Dec 30 16:45:49 jupiter racoon[2183]: IKEv1 Information-Notice: transmit success. (R-U-THERE?).
    Dec 30 16:45:49 jupiter racoon[2183]: IKEv1 Dead-Peer-Detection: request transmitted. (Initiator DPD Request).
    Dec 30 16:45:50 jupiter racoon[2183]: IKEv1 Dead-Peer-Detection: response received. (Initiator DPD Response).
    Dec 30 16:45:50 jupiter racoon[2183]: IKE Packet: receive success. (Information message).
    Dec 30 16:46:10 jupiter racoon[2183]: IKE Packet: transmit success. (Information message).
    Dec 30 16:46:10 jupiter racoon[2183]: IKEv1 Information-Notice: transmit success. (R-U-THERE?).
    Dec 30 16:46:10 jupiter racoon[2183]: IKEv1 Dead-Peer-Detection: request transmitted. (Initiator DPD Request).
    Dec 30 16:46:10 jupiter racoon[2183]: IKEv1 Dead-Peer-Detection: response received. (Initiator DPD Response).
    Dec 30 16:46:10 jupiter racoon[2183]: IKE Packet: receive success. (Information message).
    Dec 30 16:46:30 jupiter racoon[2183]: IKE Packet: transmit success. (Information message).
    Dec 30 16:46:30 jupiter racoon[2183]: IKEv1 Information-Notice: transmit success. (R-U-THERE?).
    Dec 30 16:46:30 jupiter racoon[2183]: IKEv1 Dead-Peer-Detection: request transmitted. (Initiator DPD Request).
    Dec 30 16:46:30 jupiter racoon[2183]: IKEv1 Dead-Peer-Detection: response received. (Initiator DPD Response).
    Dec 30 16:46:30 jupiter racoon[2183]: IKE Packet: receive success. (Information message).

  • How to enable traffic between VPN clients in Windows Server 2012 R2?

    Hello, 
    I installed Remote Access role with VPN.
    IPv4 Router is enabled: http://snag.gy/UAMY2.jpg
    VPN clients should use static ip pool: http://snag.gy/REjkB.jpg
    One VPN user is configured to have static ip: http://snag.gy/TWwq0.jpg
    VPN server uses Windows Authentication and Windows Accounting.
    With this setup, VPN clients can connect to server, get ip addresses and can see server via server's vpn ip. Server can connect to VPN clients too (Using client's vpn ips). But VPN clients can't communicate with each other.
    For example, VPN server has ip 192.168.99.5
    VPN Client 1 - 192.168.99.6
    VPN Client 2 - 192.168.99.7
    I am able to ping 192.168.99.5 from both clients, and able to ping 192.168.99.6 and 192.168.99.7 from server via remote desktop. But I am not able to ping 192.168.99.7 from client 1 and 192.168.99.6 from client 2.
    If I trace route from 192.168.99.6 to 192.168.99.7 - I can see that packets goes to server (192.168.99.5) and next hop - request timeout.
    What else should I configure to allow network traffic between VPN clients?

    Hi,
    To better analyze this issue, would you please post the routing tables on the two VPN clients? You can run "route print" at the command prompt to get the routing table.
    Best regards,
    Susie
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • Mac Mini Server VPN Issues - Driving me insane

    Mac Mini Late 2012
    Late 2012
    Software  OS X 10.8.2 (12C2034)
    Server Version 2.2(166)
    Previous Issues experiencing: Before i rang apple support and spoke with enterprise support i had no luck at all for weeks getting the VPN connected.
    After calling support it seemed to have something to do with my useraccount - Guided through the process of creating new dummy account and trying to connect then. Which sssucceeded..!!!
    However. Back on my main account and deleting other user accounts im facing great difficulty setting up a VPN for the purpose of a VPN.
    The issue now is: Once i get connected to my mac successfully from my iPhone using the VPN server all is good to go.
    However. WHen i restart my computer (For testing purposes this was done) When the MacOS boots up again I have to relog into the Server app. Resign into the program, THen try and reconnect my VPN (WHich will be impossible to do if im out of the country). But it doesnt end there. I keep having to reisue a new Shared Password. FOr testing i Used 1234abcd. Got a good connection - Proceeded with restart and then had to change 12345abcd.
    So i have tested this well over 50 times. Trying to find a solution.
    In summary: Everytime i use the MAC Mini Server, I have to.
    1 Auto login.
    2 Repopen the Server.app even though i have enabled it to autostart.
    3. Log into the server app (Not another networks Server)
    4 Change my shared password
    5 Try and reconnect and pray it works.
    Whats the quick fix for this. Its driving me insain and honestly making this a 1000$ peice of junk. Its hopeless regarding a server. I want it to be completely operational when i leave the country. My server is designed to Shut on and off between down times (Night Times) when i wake up i jsut want to be able to reconnect via a VPN and no issues, be on my way with life. Not having to wory about remote logging into the PC to then reset up the server.
    Any help please!

    I sometimes get this same message window or a VPN Not Authorized window after rebooting my server. I have the Mac Mini late-2012 base model running OS X Server. When I do, I just try reconnecting and after no more than 3 attempts a connection is made either by my rMBP or my iPhone5.
    I leave my server running 24/7 and I rarely get either of the two messages mentioned above.
    You shouldn't need to open the Server.app unless you need to manage services. The Server services you configured should start everytime you restart. I have the Server.app icon on my Dock, but I do not launch it automatically. I manually click to launch it when I need to manage the Server, Accounts or Services.

  • Can't connect to Easy VPN Server using Windows 7 inbuilt VPN client

    Hi Everyone,
    I would like your help to resolve a vpn issue I am having with my Windows 7 inbuilt vpn client. I am trying to connect to an Easy vpn server on a Cisco 2951 ISR G2. Well, I can connect using Cisco vpn client v5.07 but I can't connect using Windows 7 inbuilt vpn client. Is there any configuration that I am missing so that I can connect using Windows 7 inbuilt vpn client to connect to the vpn server?
    Thank you.

    Hi MindaugasKa,
    Base on your description, your case must is the NPS client can’t pass the NPS policy.
    The NPS client can’t connect the network may have many reason, such as the Network Access Protection Agent service not started successful, the certificate not issued properly,
    please offer us information when your Windows 7 client denied, such as event id, original error information, screenshot.
    More information:
    Extensible Authentication Protocol (EAP) Settings for Network Access
    http://technet.microsoft.com/en-us/library/hh945104.aspx
    Network Access Protection in NPS
    http://msdn.microsoft.com/en-us/library/cc754378.aspx
    Appendix A: NAP Requirements
    http://technet.microsoft.com/en-us/library/dd125301(v=ws.10).aspx
    802.1X Authenticated Wireless Access Overview
    http://technet.microsoft.com/en-us/library/hh994700.aspx
    Connecting to Wireless Networks with Windows 7
    http://technet.microsoft.com/library/ff802404.aspx
    The related thread:
    NPS 2012 rejects windows 7 clients after upgrade from 2008 R2. Requested EAP methods not available
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/44af171f-6155-4f2e-b6c7-f89a2d755908/nps-2012-rejects-windows-7-clients-after-upgrade-from-2008-r2-requested-eap-methods-not-available?forum=winserverNAP
    I’m glad to be of help to you!
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • VPN issue please help???

    Hi,
    I am trying to connect vpn client (Win XP) and its works just fine. It is also communicating with radius server and internal network no issues in that. However, when using vpn client on Win 7 it does not connect. I can see from the debug in firewall that phase 2 is complete, but the client does not connect and I can see the error 809 in Win 7 (32 bit and 64 bit) clients. I would really appreciate if anyone can just guide me in right direction. Please see below the code that is working fine for XP.
    nat (inside,outside) source static obj-172.16.0.0-nonat obj-172.16.0.0-nonat destination static obj-192.168.0.0-nonat obj-192.168.0.0-nonat no-proxy-arp route-lookup
    aaa-server int-radius-group protocol radius
    aaa-server int-radius-group (inside) host 172.16.5.100
    key ***
    radius-common-pw ***
    crypto ipsec ikev1 transform-set RA-VPN-Set-3desmd5 esp-3des esp-md5-hmac
    crypto ipsec ikev1 transform-set RA-VPN-Set-3desmd5 mode transport
    crypto ipsec ikev1 transform-set RA-VPN-Set-aes128sha esp-aes esp-sha-hmac
    crypto ipsec ikev1 transform-set RA-VPN-Set-aes128sha mode transport
    crypto ipsec ikev1 transform-set RA-VPN-Set-aes256sha esp-aes-256 esp-sha-hmac
    crypto ipsec ikev1 transform-set RA-VPN-Set-aes256sha mode transport
    crypto ipsec ikev1 transform-set RA-VPN-Set-aes256md5 esp-aes-256 esp-md5-hmac
    crypto ipsec ikev1 transform-set RA-VPN-Set-aes256md5 mode transport
    crypto ipsec ikev1 transform-set RA-VPN-Set-dessha esp-des esp-sha-hmac
    crypto ipsec ikev1 transform-set RA-VPN-Set-dessha mode transport
    crypto ipsec ikev1 transform-set RA-VPN-Set-3dessha esp-3des esp-sha-hmac
    crypto ipsec ikev1 transform-set RA-VPN-Set-3dessha mode transport
    crypto ipsec ikev1 transform-set RA-VPN-Set-desmd5 esp-des esp-md5-hmac
    crypto ipsec ikev1 transform-set RA-VPN-Set-desmd5 mode transport
    crypto ipsec ikev1 transform-set RA-VPN-Set-aes192md5 esp-aes-192 esp-md5-hmac
    crypto ipsec ikev1 transform-set RA-VPN-Set-aes192md5 mode transport
    crypto ipsec ikev1 transform-set RA-VPN-Set-aes192sha esp-aes-192 esp-sha-hmac
    crypto ipsec ikev1 transform-set RA-VPN-Set-aes192sha mode transport
    crypto ipsec ikev1 transform-set RA-VPN-Set-aesmd5 esp-aes esp-md5-hmac
    crypto ipsec ikev1 transform-set RA-VPN-Set-aesmd5 mode transport
    crypto dynamic-map dyn-ra-vpn 65000 set ikev1 transform-set RA-VPN-Set-3desmd5 RA-VPN-Set-aes128sha RA-VPN-Set-aes256s-dessha RA-VPN-Set-3dessha RA-VPN-Set-desmd5 RA-VPN-Set-aes192md5 RA-VPN-Set-aes192sha RA-VPN-Set-aesmd5
    crypto dynamic-map dyn-ra-vpn 65000 set reverse-route
    crypto map ASA-VPN-SITE 65000 ipsec-isakmp dynamic dyn-ra-vpn
    crypto map ASA-VPN-SITE interface outside
    crypto ikev1 enable outside
    crypto ikev1 policy 10
    authentication pre-share
    encryption 3des
    hash md5
    group 2
    lifetime 86400
    crypto ikev1 policy 20
    authentication pre-share
    encryption 3des
    hash sha
    group 2
    lifetime 86400
    crypto ikev1 policy 30
    authentication pre-share
    encryption aes-256
    hash sha
    group 2
    lifetime 86400
    crypto ikev1 policy 40
    authentication pre-share
    encryption aes-192
    hash sha
    group 2
    lifetime 86400
    crypto ikev1 policy 50
    authentication pre-share
    encryption aes
    hash sha
    group 2
    lifetime 86400
    crypto ikev1 policy 60
    authentication pre-share
    encryption des
    hash sha
    group 2
    lifetime 86400
    group-policy RA-VPN-GP internal
    group-policy RA-VPN-GP attributes
    dns-server value 172.16.5.31 172.16.5.32
    vpn-tunnel-protocol ikev1 l2tp-ipsec
    default-domain value mydomain.com
    intercept-dhcp enable
    client-firewall none
    tunnel-group DefaultRAGroup general-attributes
    address-pool ra-vpn-ippool
    authentication-server-group int-radius-group
    default-group-policy RA-VPN-GP
    tunnel-group DefaultRAGroup ipsec-attributes
    ikev1 pre-shared-key *****
    tunnel-group DefaultRAGroup ppp-attributes
    no authentication chap
    authentication ms-chap-v2
    Thanks & Regards
    Rohit

    We are using VPN client v5.0.05.0290 without a problem.  Here is a link that I found initially when testing with Windows 7 and the VPN client...maybe it will help you resolve your issue.
    http://weblogs.asp.net/bhouse/archive/2009/01/15/how-to-successfully-install-cisco-vpn-client-on-windows-7.aspx
    I didn't have to use this procedure on windows 7 pro 32bit.
    On a different note, can you pass traffic to hosts on your internal LAN by IP address or hostname?  I found an issue using the AnyConnect client - I didn't configure the connection profile to tell the connecting client what our internal domain name was...so my clients weren't able to make connections inbound withougt manually appending the domain name to the end of the hostname...shot in the dark...
    Good Luck!!
    "please rate me if post helpful"

  • How to create a VPN client for Windows Phone 8.1?

    We have our own VPN client for Windows and Android. I would like to create a VPN client  for Windows phone 8.1. After referring these site I found that there are some third
    party VPN plugins available for WP 8.1.
    I checked OpenVPN but it is also not available for WP 8.1.
    Is there any APIs available for creating a VPN client in WP 8.1 similar to
    VpnService provided by Android SDK ?

    The VPN APIs for WP8.1 are not open at this time.
    Matt Small - Microsoft Escalation Engineer - Forum Moderator
    If my reply answers your question, please mark this post as answered.
    NOTE: If I ask for code, please provide something that I can drop directly into a project and run (including XAML), or an actual application project. I'm trying to help a lot of people, so I don't have time to figure out weird snippets with undefined
    objects and unknown namespaces.

  • Remote access Vpn issue

    Dear All,
    I have configured remote access vpn without using split tunnel.Everything is working fine.I can access all the inside network which is allowed in acl.
    I am facing strange issue now. I have created a pool for remote access vpn with a range 192.168.5.8/29.I can access my internal subnets 10.10.0.0/16.
    I have below acess-list for acl-in.
    access-list acl-in extended permit ip object-group vpnclients 192.168.5.8 255.255.255.248
    object-group network vpnclients
    network-object host 10.110.100.26
    network-object host 10.106.100.15
    network-object host 10.10.10.6
    network-object host 10.10.20.82
    network-object host 10.110.100.48
    network-object host 10.10.20.53
    network-object host 10.10.20.54
    network-object host 10.60.100.1
    network-object host 10.10.10.75
    network-object host 10.10.20.100
    network-object host 10.10.130.136
    network-object host 10.106.100.16
    network-object host 10.106.100.9
    network-object host 10.170.100.1
    network-object host 10.170.100.2
    network-object host 10.170.100.21
    network-object host 10.101.100.20
    network-object host 10.170.100.25
    So whichever IPs i have called in vpnclient group is able to access via RA vpn.Issue is when i try to access internal network of 192.168.198.0/24, i am able to access it without adding in vpnclient group. Even for 192.168.197.0/24,192.168.197.0/24 the same. But for 10.10.0.0/16 we can access only after adding in vpnclient group. Any one has face this issue before. Is this because of same network i mean 192.168.0.0 something like that.There is no other staement in acl-in for 192.168.0.0
    Regards
    -Danesh Ahammad

    Hi,
    If i read correctly you made the RA vpn "without"  split tunnel, correct? if that is the case, all of the traffic will traverse the vpn connection (tunnel all) , the access-list "acl-in" is of no use to it.
    try converting it to use split tunnel, i am sure that way you can not access resources that are not mentioned in the list.
    ~Harry

  • Windows 8.1 RDP Issues with Windows Server 2008 Standard.

    I have an issue maintaining an RDP connection from 64-bit windows 8.1 (standard and pro) to 32-bit Windows Server 2008 Standard.  Initial connection is normal, and as long as I am constantly typing on the link, for the most part it stays up. However
    if I do not keep typing, or go to another desktop program for a few minutes, and then go back, the following happens:
    If I am typing into notepad (or some screen that does not require windows to be refreshed) I can continue to do so, so the connection has not been lost, however if I try to do something that requires more extensive exchange of information (like file
    - open, or even trying to pull up the start menu), the connection pauses with about half the screen refreshed, sometimes after about 30 seconds a bit more of the screen fills out, but otherwise the connection is not responsive. Then after about 2 minutes,
    RDP reconnects, at which point I am back to "normal".  I have conducted some tests and made inquiries of others attempting to connect to the server.
    1) I can connect to other Windows (servers 2008 R2 and 2012)  with no connection issues from this PC
    2) I can connect to the 32-bit server with no issues using Windows Vista Ultimate and Windows 7 from the same location as the WIndows 8.1 PC
    3) When I do a network speed test while having these issues I see full download and upload speeds, so I am not experiencing intermittent internet issues.
    4) No-one else from other locations (not of course using Windows 8.1) has any issues using RDP to the 32-bit Windows Server Standard.
    These various tests seem to eliminate my network connection, and other operating systems, from the equation, and point to RDP issues on windows 8.1 connecting to the older OS.  I noticed in the September updates, a case 2989039 which seemed to point
    to similar issues when using UDP through Remote Desktop Gateway.  That update is on my machine, and my connection has the setting Automatically detect RD Access Gateway server settings.
    Any thoughts anyone?

    Hi  RonaldRenaud,
    If my understanding is right, this RDP issue only occur in the connection between Windows 8.1 and Server 2008.
    Please check if you have installed the update kb2984006.
    To resolve this issue caused by update 2989039, install update rollup 2984006. For more information, please refer to the following KB.
    http://support2.microsoft.com/kb/2989039/en-us
    Best regards,
    Fangzhou CHEN
    Fangzhou CHEN
    TechNet Community Support

  • SAP Netweaver Installation Issue on Windows 7

    Hi,
    I was trying to install Netweaver 7.3 (Java) in my windows 7 and when I was in step 30 of 33 (Java components deployment)
    I got the following error
    Error message is 'undefinednull:ram-PC:50004 Reason: com.sap.engine.services.rmi_p4.P4IOException: Cannot open connection to host: 10.10.0.10 and port: 50004. Check if the host and port specified are correct and AS Java is up and running.. SOLUTION: Check 'undefined' and '' for more information.).
    I have successfully created loopback adapter and able to ping the IP address of the adapter . But when SAP server is trying to connect to this adapter using port 50004 and Its getting the error message . I don't know how to assign the port number to this loop back adapter.
    I tried to use telnet but it failed . (telnet ram-PC 50004 )
    loopback adapter IP : 10.10.0.10
    Host name : ram-PC
    As I am new to SAP , Please let me know is there any file where I need to define host and port ? Do I need to update service.msc file from  windows\system32\drivers\etc\ ? If so, what would be the service name and port ?
    Steps taken to resolve this issue :
    updated windows host file with IP and host name (10.10.0.10 ram-PC)
    updated windows service file with host and port (ram-PC 50004) - This step might be wrong (Do I need to use hostname or service name ?)
    uninstalled Antivirus
    Turned off windows firewall
    Added loopback adapter IP address to Windows firewall inbound rules .
    None of the above steps resolved the error . Please help me on the above issue.any help would be appreciated .
    Thanks
    Ram

    Here is the detailed error message
    null:ram-PC:50004 Reason: com.sap.engine.services.rmi_p4.P4IOException: Cannot open connection to host: 10.10.0.10 and port: 50004. Check if the host and port specified are correct and AS Java is up and running.
         at com.sap.engine.services.dc.api.session.impl.SessionImpl.handleConnectionIssue(SessionImpl.java:381)
         at com.sap.engine.services.dc.api.session.impl.SessionImpl.parseNamingException(SessionImpl.java:337)
         at com.sap.engine.services.dc.api.session.impl.SessionImpl.getContext(SessionImpl.java:230)
         at com.sap.engine.services.dc.api.session.impl.SessionImpl.<init>(SessionImpl.java:150)
         at com.sap.engine.services.dc.api.session.impl.SessionFactoryImpl.newSession(SessionFactoryImpl.java:27)
         at com.sap.engine.services.dc.api.impl.ClientFactoryImpl.createClient(ClientFactoryImpl.java:117)
         at com.sap.engine.services.dc.api.cmd.AbstractCommand.execute(AbstractCommand.java:180)
         at com.sap.engine.services.dc.api.cmd.Runner.execute(Runner.java:37)
         at com.sap.engine.services.dc.api.cmd.Runner.main(Runner.java:61)
    Caused by: javax.naming.NamingException: Exception while trying to get InitialContext. [Root exception is com.sap.engine.interfaces.cross.DestinationException: Cannot establish connection with any of the available instances:
    null:ram-PC:50004 Reason: com.sap.engine.services.rmi_p4.P4IOException: Cannot open connection to host: 10.10.0.10 and port: 50004]
         at com.sap.engine.services.jndi.InitialContextFactoryImpl.getInitialContext(InitialContextFactoryImpl.java:381)
         at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:667)
         at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:288)
         at javax.naming.InitialContext.init(InitialContext.java:223)
         at javax.naming.InitialContext.<init>(InitialContext.java:197)
         at com.sap.engine.services.dc.api.session.impl.SessionImpl.getContext(SessionImpl.java:215)
         ... 6 more
    Caused by: com.sap.engine.interfaces.cross.DestinationException: Cannot establish connection with any of the available instances:
    null:ram-PC:50004 Reason: com.sap.engine.services.rmi_p4.P4IOException: Cannot open connection to host: 10.10.0.10 and port: 50004
         at com.sap.engine.interfaces.cross.Destination.getNextAvailableBroker(Destination.java:64)
         at com.sap.engine.interfaces.cross.Destination.getRemoteBroker(Destination.java:39)
         at com.sap.engine.services.jndi.InitialContextFactoryImpl.getInitialContext(InitialContextFactoryImpl.java:297)
         ... 11 more
    [ Error ]
    [ Error ] Cannot connect[ ConnectionException ].Reason: [ERROR CODE DPL.DCAPI.1144] Could not establish connection to AS Java on [ram-PC:50004]. Cannot establish connection with any of the available instances:
    null:ram-PC:50004 Reason: com.sap.engine.services.rmi_p4.P4IOException: Cannot open connection to host: 10.10.0.10 and port: 50004. Check if the host and port specified are correct and AS Java is up and running.
    ERROR[ BEGIN ]
    Cannot connect[ ConnectionException ].Reason: [ERROR CODE DPL.DCAPI.1144] Could not establish connection to AS Java on [ram-PC:50004]. Cannot establish connection with any of the available instances:
    null:ram-PC:50004 Reason: com.sap.engine.services.rmi_p4.P4IOException: Cannot open connection to host: 10.10.0.10 and port: 50004. Check if the host and port specified are correct and AS Java is up and running.
    ERROR[ END ]
    108
    Cannot connect[ ConnectionException ].Reason: [ERROR CODE DPL.DCAPI.1144] Could not establish connection to AS Java on [ram-PC:50004]. Cannot establish connection with any of the available instances:
    null:ram-PC:50004 Reason: com.sap.engine.services.rmi_p4.P4IOException: Cannot open connection to host: 10.10.0.10 and port: 50004. Check if the host and port specified are correct and AS Java is up and running.
    [ Info ] Destroy command:[getParams]
    ERROR      2012-02-29 13:27:56.797
               CJSlibModule::writeError_impl()
    CJS-30181  At least one prerequisite for deployment is not met. DIAGNOSIS: Execution of Deploy Controller Runner tool '"C:\Program Files\sapinst_instdir\NW73\INSTALL\SERVER\sapjvm\sapjvm_6\bin\java.exe" -classpath "C:/Program Files/sapinst_instdir/NW73/INSTALL/SERVER/install/lib;C:/usr/sap/RAM/SYS/global/security/lib/tools/iaik_jce.jar;C:/usr/sap/RAM/SYS/global/security/lib/tools/iaik_jsse.jar;C:/usr/sap/RAM/SYS/global/security/lib/tools/iaik_smime.jar;C:/usr/sap/RAM/SYS/global/security/lib/tools/iaik_ssl.jar;C:/usr/sap/RAM/SYS/global/security/lib/tools/w3c_http.jar;C:/usr/sap/RAM/J00/j2ee/j2eeclient/sap.comtcexceptionimpl.jar;C:/usr/sap/RAM/J00/j2ee/j2eeclient/sap.comtcjeclientlibimpl.jar;C:/usr/sap/RAM/J00/j2ee/j2eeclient/sap.comtcloggingjavaimpl.jar;C:/Program Files/sapinst_instdir/NW73/INSTALL/SERVER/install/lib/tcje~cl_deploy.jar" -Xmx256m -Ddc.api.verbose=false com.sap.engine.services.dc.api.cmd.Runner getParams -o "C:/Program Files/sapinst_instdir/NW73/INSTALL/SERVER/DCRetrievedVars.props" --host ram-PC --port 50004' aborts with return code 108. Error message is <b>'undefinednull:ram-PC:50004 Reason: com.sap.engine.services.rmi_p4.P4IOException: Cannot open connection to host: 10.10.0.10 and port: 50004. Check if the host and port specified are correct and AS Java is up and running..</b> SOLUTION: Check 'undefined' and '' for more information.
    ERROR      2012-02-29 13:27:56.844 [sixxcstepexecute.cpp:937]
    FCO-00011  The step deploySoftwareComponents with step key |NW_Java_OneHost|ind|ind|ind|ind|0|0|SAP_Software_Features_Enablement|ind|ind|ind|ind|usage_enable|0|NW_DeployOptionalSoftware|ind|ind|ind|ind|deploy|0|deploySoftwareComponents was executed with status ERROR ( Last error reported by the step: At least one prerequisite for deployment is not met. DIAGNOSIS: Execution of Deploy Controller Runner tool '"C:\Program Files\sapinst_instdir\NW73\INSTALL\SERVER\sapjvm\sapjvm_6\bin\java.exe" -classpath "C:/Program Files/sapinst_instdir/NW73/INSTALL/SERVER/install/lib;C:/usr/sap/RAM/SYS/global/security/lib/tools/iaik_jce.jar;C:/usr/sap/RAM/SYS/global/security/lib/tools/iaik_jsse.jar;C:/usr/sap/RAM/SYS/global/security/lib/tools/iaik_smime.jar;C:/usr/sap/RAM/SYS/global/security/lib/tools/iaik_ssl.jar;C:/usr/sap/RAM/SYS/global/security/lib/tools/w3c_http.jar;C:/usr/sap/RAM/J00/j2ee/j2eeclient/sap.comtcexceptionimpl.jar;C:/usr/sap/RAM/J00/j2ee/j2eeclient/sap.comtcjeclientlibimpl.jar;C:/usr/sap/RAM/J00/j2ee/j2eeclient/sap.comtcloggingjavaimpl.jar;C:/Program Files/sapinst_instdir/NW73/INSTALL/SERVER/install/lib/tcje~cl_deploy.jar" -Xmx256m -Ddc.api.verbose=false com.sap.engine.services.dc.api.cmd.Runner getParams -o "C:/Program Files/sapinst_instdir/NW73/INSTALL/SERVER/DCRetrievedVars.props" --host ram-PC --port 50004' aborts with return code 108. Error message is <b>'undefinednull:ram-PC:50004 Reason: com.sap.engine.services.rmi_p4.P4IOException: Cannot open connection to host: 10.10.0.10 and port: 50004. Check if the host and port specified are correct and AS Java is up and running..</b> SOLUTION: Check 'undefined' and '' for more information.).
    INFO       2012-02-29 13:27:57.702 [synxcpath.cpp:814]
               CSyPath::createFile() lib=syslib module=syslib
    Creating file C:\Program Files\sapinst_instdir\NW73\INSTALL\SERVER\__instana_tmp.xml.
    Edited by: ramkumarsm on Feb 29, 2012 7:37 PM

  • Hp laserjet pro mfp m126nw printing issues in windows server 2008 r2 standard

    hp laserjet pro mfp m126nw printing issues in windows server 2008 r2 standard
    printer  installed but print not coming ...
    please give me solutions of this problem

    go to http://www.hp.com/go/tools may help resolve the issue.
    Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
    Click "Accept as Solution" if it solved your problem, so others can find it.
    I work on behalf of HP.

  • HP 6600 Scan\Print Driver Issue for Windows 7 Profession​al 64 bit

    Hello,
    For some time now I have been unable to scan or print from my desktop (Windows 7 Professional 64bit) and I have exhausted too much effort and am now bringing it to the masses.
    The problem:
    Printing:  Currently receiving an "Error - Offline" message in my printer queue at all times.
    Scanning:  Scanning has never fully worked on this desktop. I am always unable to communicate with the printer. (Though webscan works through accessing the printers IP address)
    Things I have tried:
    Ran HPPSDr, followed directions (Unpluged power to printer, turn back on, restart computer) brings me to this website after it cannot fix. (Note that while the HPPSDr is running it always notions that there is a driver problem)
    Uninstalled Drivers from CD-ROM, re-installed, countless times
    Installed "Windows 7 Pro 64 bit drivers" from the HP website and uninstalled, countless times.
    Attempted to set a static IP and use "Update IP Address" to point specifically at the printers IP.
    Installed Drivers and finding the printer myself through it's own static IP address.
    Turned off firewall and attempted to print (after reboot), same errors
    Setting up the printer on all of my laptops (3) wirelessly to attempt to find if there is a problem with the printer or static IP. (1 is Windows VISTA 32bit and the other 2 are Ubuntu 32bit). All laptops are able to use the printer wirelessly without any problems.
    Read all of the forums about this issue and attempted all of the 'solutions'. Although I mostly don't see that anyone with this same problem is resolved, unless I'm missing the perfect post.
    Things I have not tried:
    Plugging the USB directly into the desktop. (This seems self defeating as the purpose for this printer was to be able to print wirelessly to it from across the room)
    Re-installed Windows 7 Pro 64bit (Trying to avoid this, would rather just print from laptops)
    You tell me
    Curiosities:
    I have noticed strange things that make me believe the driver is somehow incomptable with my OS. Here is a shot of the properties of the printer:
    Weird that it is not recognizing the model number.
    Also in the Printer Settings when I go to the port tab, there is no port selected, if I try and tab away it forces me to select a port, yet when I do and 'apply' and then re-open the Printer Settings in the ports tab; it has again unselected the previously selected port.
    Theories:
    I feel like my OS is just refusing to notice the IP address for the wireless printer, no matter what I have it set to, even if it's dynamic. It's like the driver for Windows 7 Pro 64bit is actually not the correct driver for my system.
    Anyways, another thing to mention is that I am not currently willing to wipe my operating system and re-install Windows 7 Pro in order to resolve this just yet. I want to see if anyone else has any other avenues I can try before even beginning to consider that. 
    Anyways, thanks in advance for taking the time to read my ramblings and hopefully someone who has resolved this issue can help me.

    Hi Zerosouls,
    I understand you are having an issue with HP 6600 Scan\Print Driver Issue for Windows 7 Professional 64 bit.
    First try to click the Windows icon, type services in the Search box, and then click or tap View Local Services. Scroll down to the Windows Installer. Startup type should be - Automatic, and Service Status should be - started
    Restart the computer after this step and try installing Hp Officejet 6600 again.
    Please let me know what happens
    Thanks
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • How to set VPN Connection in Windows 7 64bit?

    Hi
    How can I set up a Vpn in connection in Windows 7 x64 bit.
    Thanks.

    Hi,
    Go to Control panel-Network and Internet-Network sharing Center.
    http://www.windows7hacker.com/index.php/2009/08/how-to-set-up-a-vpn-connection-in-windows-7/
    Note, you should know the login and password to have the Internet access :)

Maybe you are looking for

  • Clone  in same machine cold/hot

    Hi, 1,What are the things i have to consider before start the cloning(both cold,hot). 2,please anyone provide steps for that. 3,Is the listener should be started before starting the procedure in target machine? 4,I am planned to do in same machine or

  • Closing a swf file with a button

    I have a flash website that opens another flash website. I want my quit button on this new site to close the swf file and return back to the first flash site. I know that the quit fs command completely closes a document only if it's a projector, but

  • Sections in properties file

    In my file i have few sections and name=value pair. sectiona name1=value1 name2=value2 sectionb name3=value3 name4=value4 Can i do it in one properties class. In Properties.store i see you can write a header. So i guess header will be sectiona. Do i

  • Print Workbench

    Hi guru's, I am implementing SAP LSO recently. I want to use the Print Workbench(Collections) to create an email with a Attachment(NOT PDF Format). How can I do that? for example: When learner book a course, system will send a email(with attachment i

  • Office 365 E3 License

    How many mailboxes can I have for my domain name in office 365 e3 license?