VPN NO LONGER PROVIDES NETWORK ACCESS using SNOW LEOPARD (WORKED OK BEFORE)

I was using the Apple VPN tool to access my business network (via Leopard Server) without problem when using Leopard.
After upgrading both the server and laptops to Snow Leopard, I can successfully make a VPN connection to the server, but cannot access any of the devices on the network (printer, other computers, or NAS where my iTunes library resides).
Any suggestions would be appreciated.

Hi,
i had exactly the same issue, once i installed 10.6 the VPN would still connect, but alas i could not connect to the server internally or any other internal network devices. I solved it by disabling encryption on the VPN settings, it had 18 bit enabled by default, looks like 10.6 activates the encryption setting by default. So my advice is to ensure that if you do not have encryption enabled then make sure is is set to none in the VPN settings. Hoe this helps, like i said worked for me, but may not for you, give it a go and see what happens.
Cheers,
Gerry

Similar Messages

  • Many online sites say no longer support .... using Snow Leopard 10.6.8 on mac mini. What do I do?

    Many online sites for insurance, banking, etc. say they no longer support my system.  I use Snow Leopard that came with my Mac Mini and it's update if I go to the "software update" which is 10.6.8.  What do I do? 

    Your Mac Mini is capable of being upgraded to Yosemite (free in the Mac App Store). The specified minimum of RAM is 2GB but you are likely to find it runs very slowly on that, with a lot of beachballing. I don't know what the maximum RAM is but you should consider installing extra if you can. Even so you may well find it's rather slow - Yosemite is really optimized for modern Macs running SSDs.
    Snow Leopard isn't getting any more security updates by the look of things, so there's a lot to be said for upgrading it. However if you install the latest FireFox (36.0.4) that will run on Snow Leopard and should at least solve the inaccessible sites problem.
    If you do decide to go for Yosemite you should make comprehensive backups: I would advise if possible cloning the entire Mac to an external hard disk, so that if you find you don't like Yosemite you can clone back and be no worse off. Otherwise downgrading is frankly a pain to do.

  • My Imac is ejecting every disk inserted in it, I cannot access the disks, can any body help me troubleshoot the problem. I am using snow leopard.

    My Imac is ejecting every disk inserted in it, I cannot access the disks, can any body help me troubleshoot the problem. I am using snow leopard.

    Try resetting the SMC Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support
    and PRAM How to Reset NVRAM on your Mac - Apple Support
    If those don't help you can try a cleaning disc or a quick shot of compressed air. Chances are that your drive has failed, join the club it's not all that uncommon. You can either have it replaced or purchase an inexpensive external drive. Don't buy the cute little Apple USB Superdrive, it won't work on macs with internal drives working or not.

  • Does mountain lion comes with graphic, Does mountain lion comes with graphi, Does mountain lion comes with graphic driver updates?  I'm currently using snow leopard, and it seems that there's no graphic driver updates for a really long time.

    Need some advice

    I'm currently using snow leopard, and it seems that there's no graphic driver updates for a really long time.
    Snow Leopard is no longer being updated, 10.6.8, was the last update. So, a "really long time," will be forever.
    Yes, ML has graphic driver updates, but since there is no way to guess whether it impacts your unmentioned hardware, there is no way your question can be answered.

  • Using snow leopard on external hard drive w/Mountain Lion OS Mac

    I need to use Snow Leopard in order to use some expensive software that will not work in Lion or Mountain Lion. All of our computers have been upgraded to Mountain Lion, whcih doesn't support Rosetta. I was able to install Snow Leopard on an external hard drive and it boots up fine from another computer (that is not mine) that has Snow Leopard as its OS.
    But when I boot up from my MacBook Pro (running Mountain Lion) and from my Macbook Air (also running Mountain Lion), I can't seem to do it. I hold the "option" key when starting and I get the option to start from the computer's HD or from the external firewire Snow Leopard drive. When I choose the Snow Leopard drive, it crashes and gives me that black screen with the kernel (?) message in several languages that I need to hold down the Power key to turn off the computer and reboot.
    How can I get my MacBook Pro or my MacBook Air to boot up from the Snow Leopard external hard drive? (Once again, it DOES work with a Mac that has Snow Leopard as its OS).

    Richard Signes2 wrote:
    The question is: How do I start up my MacBook Air (or MacBook Pro) from an external FireWire Bootable hard drive with Snow Leopard on it?  When I start up either one with the "option" key pressed, I get the option to start up with the external Snow Leopard hard drive, but when I select it, it crashes, as described above.
    You can't if the Mac is a Late 2011 and later, perhaps if it's a Early 2011 (as some came with 10.6 and some with 10.7) and it should be possible for all Intel Mac's earlier than Early 2011.
    Also, like what has occurred in the past, Apple does eventually issues a firmware update in later OS X versions so that earlier OS X versions, despite the Mac previously being able to boot from them, won't any longer. However far as I know Apple hasn't done this quite yet, but will one day.
    Baring those issues, if you installed 10.6 on a external drive using a machine specific black/gray disk from another Mac, it has hardware drivers for that model/year of Mac only.
    If you used the 10.6 white retail disks from Apple, it only has hardware drivers for all previous Intel Mac's that came originally with 10.6.2 or earlier from the factory. Mac's with 10.6.3 or later on the drive from the factory have different hardware drivers, thus not on the 10.6.3 white retail disk.
    To find out what OS X version came on your machines, use the free MacTracker and use your model indentifier in the Apple menu More > Info (aka System Profiler)
    So for those Mac's that originally came with 10.6.3 or later, machine specific disks must be gotten from Apple, or if your really talented, it's possible to create a univeral 10.6-10.6.8 install disk by combing the 10.6.3 image with the 10.6.8 combo update which will boot on any Intel Mac if the firmware permits and the hardware drivers are compable.
    There is a method to bypass the firmware and install on Mac's that are Early 2011/Late 2011 via Target Disk Mode, or via taking the drive out of the machine as some Late 2011's use the same hardware drivers as the Early 2011 machines (only a processor bump basically)
    How to revert your Mac to Snow Leopard
    For the MacAir, you can install 10.6 via a USB thumb drive, of course provided it has the hardware drivers.
    http://www.maciverse.com/install-os-x-snow-leopard-from-usb-flash-drive.html
    So in your case you likely should be rather looking at running Snow Leopard in a virtual machine program in Mountain Lion, which MichealLax over at MacRumors has perfected a technique.
    Windows in BootCamp or Virtual Machine?
    http://forums.macrumors.com/showthread.php?t=1365439

  • Has Apple stopped supporting email on iCloud using Snow Leopard?

    May 1, 2012 4:43 PM 
    Has Apple stopped supporting email on iCloud using Snow Leopard?
    As of Friday, 27 Apr 12, I have been unable to load me.com email onto my computer although I can still bring in my other account (sbc), but I am only able to view my me.com email using the icloud web site. It loads ok on my iPhone, and I had an appointment @ an Apple store and all my email came in ok while in the store. I migrated to iCloud last year, but I'm still running Snow Leopard because of the incompatibility issues of Lion and other software, specifically Quicken.
    Any ideas?

    ds store wrote:
    Sorry, I'm trying a new OS (not Apple) and having a issue which I went back to edit my post and then the window closed.
    Maybe you should re-think that strategy.
    I don't know, perhaps Apple found out about Roger's trick and is now banning 10.6 users from iCloud.
    iClould still provides standard IMAP and SMTP services: http://support.apple.com/kb/HT4864
    IMO, just use a web based email like Gmail or Hushmail, that way any device anywhere that has a web broswer can get it.
    But if you use Apple Mail, then you can access your mail wether you have internet or not.

  • I just download and install itunes 10.5 and it worked good the first days but since yesterday it crashed up, and everytime i start it it crashes again and logged me out each time. it can´t acces my itunes account. I´m using snow leopard the last version.

    I just download and install itunes 10.5 and it worked good the first days but since yesterday it crashed up, and everytime i start it it crashes again and logged me out each time. it can´t acces my itunes account. I´m using snow leopard the last version. What can i do to solve this problem and and continue using my itunes normally?

    Try doing it in a WIndows Safe mode - Restart computer and hit F8 key right after your see BIOS check and choose "Safe mode with networking"
    Do the SFC /SCANNOW again.
    If that does not work, whilst in safe mode, download Free Malwarebyte software from CNET's Download.com.  Install, update virus definition then perform a full scan.  Remove if it did find some viruses or trojans.  Restart computer.
    Back to regular windows, do the SFC /SCANNOW again.
    If that doesnot work, check to see if your Hard drive has errors or bad sectors
    GO START BUTTON /COMPUTER, right mouse click OS (C:) and choose "Properties"
    Choose "Tools" tab and under error checking, click "Check Now".
    Make sure "Scan for and attempt recovery of bad sectors" is checked and click start.
    Restart windows will perform the above task to fix errors  This may take hours depends on how big is your Hard Drive
    Good Luck!!.

  • I'm still using Snow Leopard because heard too many horror stories about upgrading to Lion. But I can't upgrade Safari unless I upgrade OS. Is Mavericks any better than Lion?

    I'm still using Snow Leopard OS because I heard too many horror stories about people upgrading their OS to Lion.  But I can't upgrade Safari anymore unless I upgrade the OS. I get messages constantly telling me I need to upgrade my web browser, and have increasing problems correctly viewing pages (like L.A. TImes, NY TImes) because Safari needs upgrading.
    I can't really tell what the advantages are to upgrade to OS Mavericks or OS Yosemite because it seems most are intended for mobile apps, and I only use my desktop.
    My last upgrade to SNow Leopard wiped out 2/3 of my iPhoto collection. No idea why and no fix. Macs used to be the epitome of compatibility for upgrades — not anymore.
    What are my options? What issues would I encounter if I upgrade OS to Mavericks or to Yosemite? WHat are likely problems, advantages and disadvantages?
    Thanks for any help sent my way.

    If you do want to upgrade.
    Check that your computer is compatible with Mountain Lion/Mavericks/Yosemite.
    To check the model number hold down the option/alt key, go to the Apple menu and select System Information.
    iMac (Mid 2007 or newer) model number 7,1 or higher
    Your Mac needs:
    OS X v10.6.8 or OS X Lion already installed
    2 GB or more of memory (More is better - 4 GB minimum seems to be the consensus)
    8 GB or more of available space
    Check to make sure your applications are compatible. PowerPC applications are no longer supported after 10.6.      
    Application Compatibility
    Applications Compatibility (2)
    Do a backup before installing.
    One option is to create a new partition (~30- 50 GB), install Mavericks, and ‘test drive’ it. If you like/don’t like it it, you can then remove the partition. Do a backup before you do anything. By doing this, if you don’t like it you won't have to go though the revert process.

  • If you lost your install CD's for an iMac7,1. Can you use Snow Leopard to reboot/install?

    If you lost your install CD's for an iMac7,1. Can you use Snow Leopard to reboot/install?

    Best answer; see AnaMusic above.
    Will SL do? Yes, provided you use the SL retail disc. A grey disc from another Mac will not work.
    A few considerations -
    Be warned that printer drivers, and scanner drivers in particular will almost certainly need updating for SL. That could be a problem if the printer or scanner is more than a couple of years old.
    Many third party applications (and some Apple ones) may need updates for SL (Adobe particularly), so check with the vendors for compatability before you upgrade.
    You'll need Rosetta to run PPC apps like Appleworks and many MS Office or Adobe versions. Ensure you select it from the 'optional installations' when installing SL.
    Note also that any bundled applications that came with your Tiger original discs (iLife in particular) are not included on retail OS versions.

  • Can I use Snow Leopard?

    I have an iMac G5 (1.8 GHz PowerPC G5), currently running OS v 10.5.8. From what I've read in these forums, this model is not Intel-based. Does that mean I can't use Snow Leopard? I'm not especially tech-savvy, and don't know geek-speak, so I'd appreciate simple answers! Thanks for any advice you may have.

    10.5 is still receiving security updates, and that will run on your G5.
    Considering Apple hasn't sold G5s since 2006, I'd think that's fairly good for a machine that is already out of AppleCare coverage, even if AppleCare was purchased. As long as your machine does what you need, you should have no reason not to run it. There is a large market for used and refurbished machines, that frequently can do things newer machines can not.
    For instance your G5 can run Classic if 10.4.11 or earlier is installed on it.
    Your G5 can run PowerPC games that have specific graphic drivers only found on your G5. And there are some older versions of Photoshop best optimized for G5s that don't run as well on Intel Macs. There are also some people who run Macs that are twenty or more years old, because it does what they need. So don't feel bad being left out of the Snow Leopard path.

  • I have an 06' macbook and I just bought an 07' macbook.. The 06' has os x 10.6 but the 07' has 10.5.. I no longer have the disk for snow leopard. Is there ANY way to get snow leopard from the old computer to the other without having to buy it again?

    I have an 06' macbook and I just bought an 07' macbook.. The 06' has os x 10.6 but the 07' has 10.5.. I no longer have the disk for snow leopard. Is there ANY way to get snow leopard from the old computer to the other without having to buy it again?

    Technical issues aside, there's still a legal issue.
    Neither 2006 nor 2007 MacBooks shipped with Snow Leopard 'factory' installed. OS X 10.6 Snow Leopard became available in September 2009. So you purchased and installed a Snow Leopard upgrade disc on the 2007 system at some point.
    If your Snow Leopard upgrade was a single-user copy, then legally, you need to purchase another one for the second computer. If your Snow Leopard upgrade was a Family Pack 5-user license, then you're good to go.
    http://store.apple.com/us/question/answers/product/MC574Z/A?pqid=QTUXD7AF4YU9FJD YUTDPCKYKUDDDXKHTK
    If you have an active MobileMe account, Apple was giving away a single-user upgrade copy of Snow Leopard for a limited time, and you should have received an email with a link, or been offered the opportunity when you signed in to your MobileMe account on the web:
    http://www.macrumors.com/2012/04/24/free-snow-leopard-discs-for-mobileme-users-n ow-arriving/
    Worst case, single-user Snow Leopard upgrade discs are $29 retail, direct from Apple. I'd hate to have two computers and no OS installation CD's for whatever version I'm currently using.

  • Can you use Snow Leopard Server with Timewarner Road runner for file sharin

    I have Time Warner Roadrunner service for internet. I have there fastest package. they said it has a dynamic ip address. If you are using Snow Leopard Server and I want todo File sharing upload and downloads to my Macpro do I have to have a static ip address or is there a way around this. The Static ip address accounts are expensive
    Also from your experience. if I have 12 people uploading and downloading files willt his bring my browsing in safari to a crawl?
    thanks

    You need to first check with your provider to see if that service is even allowed (often it is not). You may have to subscribe to a commercial or small business service to set up an FTP or other file sharing server.
    Actual performance depends upon what your upload capacity is, and how much of that is being used by the total users using the service. It is possible a single user downloading files from your server will consume your entire pipe. OTOH, it might support hundreds of simultaneous users, if they are each using a small amount. In reality, your link capacity will be shared by all users regardless of the number of users.

  • I currently have OS X Leopard on a macbook. No where in the entire currently that I live stocks Snow Leopard in order to upgrade. So can anyone tell me how I am supposed to upgrade to Lion without access to Snow Leopard?  arrrrgg! Thanks

    I currently have OS X Leopard on a macbook. No where in the entire country that I live stocks Snow Leopard in order to upgrade. So can anyone tell me how I am supposed to upgrade to Lion without access to Snow Leopard first?  arrrrgg! Thanks

    If by "posted to you" you mean shipped, yes. Usually UPS or FedEx is used by Apple. Note that you may need to access the Online Store that's for your country. If you are not in the US then you cannot purchase it for shipment outside of the US. You can use this link to find the store that serves your country: Change Country. You will find it at the bottom of the Online Store page.

  • When I sync my iPod to my MacBook through iTunes new events do not show up and old events are not deleted. I am using Snow Leopard  and not iSync.

    I am using Snow Leopard on a MacBook. I have an iPod touch 3G. I do not use iSync it Mobile Me. When I sync my iPod through iTunes new events on my iPod do not show up on my Mac and old events do not delete. I have read help instructions that include deleting the data on the iPod. The iPod has the correct data and the Mac does not so I have not followed those instructions. I need help as the only reason I bought the Mac was to be able to sync, back up, view and print my calendar. Currently it is useless. If only Apple could have learned from the elegance of the Palm software.

    Start here:
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

  • Print to PDF - using Snow Leopard (Saving a PDF file when printing is not supported. Instead, choose

    i have a PDF form that i created that is used as a custom proposal that my company sends out to potential clients. the form in its editable state is only used internally. we recently upgraded to snow leopard, but prior to the upgrade, we were able to fill the custom proposal form out using adobe reader, and, as you well know, we weren't able to save that edited document as a PDF with the custom form fields filled out. our work around using adobe reader was to print to a pdf using the adobe pdf printer in the printer dialog. with the addition of snow leopard, however, instead of choosing the adobe pdf printer, we were to choose PDF from the bottom left corner, then Save As PDF, and it would spit out an uneditable pdf that then allowed us to email it to the potential client without them being able to edit it as well as have an internal, digital copy for our records instead of having lots of paper floating around (i know this is also doable using security that disallows the client certain editing privileges, but printing to a pdf is much quicker and more efficient, and the pdf security isn't really that secure at its best).
    in any case, i came across this gem of a post here on the support forums that installs another option from the PDF drop down on the bottom left of the print dialog menu that reads Save As Adobe PDF and is supposed to do exactly what i am trying to get it to do...print to a pdf file from adobe reader.
    http://kb2.adobe.com/cps/509/cpsid_50981.html    
    once i updated to acrobat 9.2 (as the link above suggests 9.1), however, the Save As Adobe PDF does appear in the print dialog menu, but it still gives me the same error that acrobat 8 - 9 gave me while using Snow Leopard — Saving a PDF file when printing is not supported. Instead, choose File > Save — and as i've already explained, you can't save an edited pdf form in reader (as i am the only one in the office with acrobat) and still keep the fields as you've entered them in. the only work around is to print to a pdf but is apparently having some recent problems.
    using acrobat, however, i know that i can save the editable pdf as a new file with the fields customized as i have left them, but it still saves it as an editable pdf and the print to a pdf option still remains the best option...that way we have digital copies internally that are uneditable that can be printed at any time or emailed to the client.
    how can i do print to a pdf, based on what i've written above, using snow leopard and acrobat and reader?

    A simple way is to flatten the form fields, which converts the field appearances to regular page contents. You can do this with JavaScript or PDF Optimizer (Advanced > PDF Optimizer > Discard Objects > Flatten form fields). A very nice script that adds a custom menu item can be found here: http://www.uvsar.com/projects/acrobat/flattener/

Maybe you are looking for

  • PLEASE HELP ME!  My iPod will suddenly not update, I've tried everything!

    Here is a little background info. I am using a 20GB touch wheel Ipod bought about 1 1/2 years ago. It was the last model of Ipod made before the color screens came out. I have used it forever and have never had a single problem until now (ever since

  • Monitoring IDOC

    Where to get as much as possible information about processing and monitoring IDOC processing. I have in mind workflow for idocs with errors, monitoring in solution manager and maybe something else. I would not like marketing material but something mo

  • Broadcom wl with wicd

    Hello All, I have a broadcom card that only works with the wl kernel driver. I was running an older version of wicd (two updates ago) and I could connect to any network such as WPA WEP and wired. Since the newest two updates, I can not connect to sec

  • TRYING TO DOWNLAOD DIGITAL COPY OF PROMETHEUS ONTO ITUNES. KEEP GETTING AN ERROR MESSAGE OF 5000. CAN ANY ONE HELP?

    TRYING TO DOWNLAOD DIGITAL COPY OF PROMETHEUS ONTO ITUNES. KEEP GETTING AN ERROR MESSAGE OF 5000. CAN ANY ONE HELP?

  • DB(A) vs Frequency plot through NI9234

    I am trying to make a plot of dB(A) vs. Frequency of an auditory signal. The DAQ picked for this application is NI9234. Using the help of this forum, I managed to get a display going of dB(A) over time. So far so good. Where it gets murky (sorry for