VPN no longer working after iOS 8.0.2 upgrade. Anyone having same issue?

Since I upgraded to iOS 8.0.2, the PPTP VPN configurations no longer connect.  I deleted and re-created the settings, but this did not solve the problem. Is there a way of fixing this?

Yes, same problem here. Tested on both 8.0 and 8.0.2. VPN will connect but will not pass traffic from the idevice into the network. I am able to ping the device from inside of my network to its VPN IP address. However, I am not able to get to any internal resources from the device. I have done some of the troubleshooting that is posted above with no success. I have rebooted the device, reset network settings, and I have reset the entire device. I'm testing on an iPhone 5 and an iPad2. I also have an iPhone 4s here that is still on IOS 7 that has a working VPN and can connect to all internal resources as normal. I contacted Apple support yesterday and after speaking with 2-3 people, all of whom acted like this was the first VPN issue they had ever heard about, I was told that a "Senior Support Agent" would contact me back. Right now I have 5 users affected by this issue. Those 5 people will have new Android devices before the End of the day. I have sent an email to the other 60+ IOS users instructing them NOT to update their device until the VPN issue is resolved. I will post any findings here including the phone number and extension of the Apple Support Personnel that I spoke with yesterday if I do not get contacted in a timely fashion. I can understand that a mistake has been made, but this issue is wide-spread and needs to be addressed.

Similar Messages

  • VPN no longer working after iOS 8.0.2 upgrade

    Hello, after the upgrade to iOS 8.0.2 we have some problems with VPN.
    The connection runs always stable and we don't change anything on our infrastructure.
    But since the upgrade the IPads/Phones always show the notification "could not connect the server"or else.
    This could not be true. The server is available from other clients (not ios). We test it with Wlan and 3G like always before.
    I heard that we should delete the VPN profile and create it new on the ipad but it don't solve the problem.
    We use IPSEK with IKEv1 and a PSK.
    Are there any changes on the ios VPN client??!
    I hope you can help me.
    THX

    Yes, same problem here. Tested on both 8.0 and 8.0.2. VPN will connect but will not pass traffic from the idevice into the network. I am able to ping the device from inside of my network to its VPN IP address. However, I am not able to get to any internal resources from the device. I have done some of the troubleshooting that is posted above with no success. I have rebooted the device, reset network settings, and I have reset the entire device. I'm testing on an iPhone 5 and an iPad2. I also have an iPhone 4s here that is still on IOS 7 that has a working VPN and can connect to all internal resources as normal. I contacted Apple support yesterday and after speaking with 2-3 people, all of whom acted like this was the first VPN issue they had ever heard about, I was told that a "Senior Support Agent" would contact me back. Right now I have 5 users affected by this issue. Those 5 people will have new Android devices before the End of the day. I have sent an email to the other 60+ IOS users instructing them NOT to update their device until the VPN issue is resolved. I will post any findings here including the phone number and extension of the Apple Support Personnel that I spoke with yesterday if I do not get contacted in a timely fashion. I can understand that a mistake has been made, but this issue is wide-spread and needs to be addressed.

  • I just updated to 8.3 and now i cant add events to my calendar  an the red icon saying howmany new texts I have does not work. Anyone having same issue?

    Anyone having same issue. It is annoying not knowing when I have a new text

    Upgrade to Snow Leopard - it's compatible with the latest version of iTunes, and still supports PowerPC applications.
    $19.99 - http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
    Snow Leopard is required if you wanted to upgrade to Lion, anyway, which you may want to in the future if the latest version of iTunes no longer supports Snow Leopard.

  • VPN no longer working after upgrade to Mountain Lion

    After upgrading to Snow Leopard, the Cisco VPN client stopped working.   This was due to the fact it ran in 64-bit, but SL allowed you to switch to 32bit which then the app still worked.
    You also had the choice of using the MacOS 'VPN' program, but it always disconnected quite often for me.
    After the upgrade, the Cisco VPN client no longer works at all, I assume again due to the fact 32bit is no longer around, however the Mac VPN client no longer works either.  It will connect, however no traffic goes over the VPN (it gets blackholed) rendering it useless.
    I have this behavior on multiple Macs, so I'm not sure if this is a known issue, or if the Mac VPN client no longer plays nice with the Cisco ASA firewalls?

    It appears that ML no longer supports 32bit applications at all. 
    Therefore, you have 2 options:
    1) Use the built in VPN client, you will need your IT's help for this as it requires the group name and password of your VPN server.   You can configure it by going to System Preferences -> Network and 'adding' an VPN (Cisco IPSec) interface.   I haven't had much luck with it, it works sometimes and sometimes it fails, but other people swear by it.
    2) Move over to the Cisco AnyConnect VPN client, which does support 64bit.  This will also require your IT department as they need to configure the SSL/AnyConnect VPN on the VPN device itself.   I went to this method yesterday and it's worked out great so far.

  • Gmail no longer works after iOS 6.1.3 update

    I just updated my iPad 3 to iOS 6.1.3 and immediately noticed that when I tried to open the mail client, it would launch and shut off.  Turns out that I had to delete all of my gmail accounts and then the mail client worked.  I tried to add the gmail accounts back but now I get the following error:
    The IMAP server "imap.gmail.com" is not responding. Check your network connection and that you entered the correct information in the "Incoming Mail Server" field.
    The strange part is that I also updated my iPhone 5 and everything works fine, including gmail!  I check the setting between the two devices and they are the same.
    Apparently, many have reported these types of issues over the past few days.  However, I've yet to see a solution.  Apple hasn't seemed to have responded at all.

    JimHdk,
    Not sure what the issue is...like I said, my iPhone works fine with the 6.1.3 upgrade, the iPad doesn't...only after the updgrade.  Additionally, other's have reported the same issue with gmail.
    https://www.google.com/#hl=en&sclient=psy-ab&q=ios+6.1.3+gmail&oq=ios+6.1.3+gmai l&gs_l=hp.3...626.4887.0.5057.15.15.0.0.0.0.232.1902.4j10j1.15.0...0.0...1c.1.7. psy-ab.O_GfIONYv3U&pbx=1&bav=on.2,or.r_qf.&bvm=bv.44158598,d.dmg&fp=a4b1ae1098b9 eca0&biw=1486&bih=683

  • Home button on iPad2 no longer works after iOS 7 upgrade

    I upgraded my iPad2 to iOS 7 today.  The home button no longer works.  I've powered it down and back up as well as restarted it but it's still not working.  Any suggestion greatly appreciated.
    About to fly to China and was looking forward to watching movies and reading on the long flight.
    Thanks!

    Hi SUSOA!
    Try using the steps in the following article to address this issue:
    iOS: An app you installed unexpectedly quits, stops responding, or won’t open
    http://support.apple.com/kb/ts1702
    Thanks for being a part of the Apple Support Communities!
    Cheers,
    Braden

  • Voice memo on iPhone 4 no longer works after iOS 6 update.

    Since updating to iOS 6, voice memo no longer works.  It kills itself upon launch.  If it doesn't do it automatically, it does it once I hit any of the buttons in it (i.e. record).  I've tried hard reset and regular restart.  Haven't tried restoring because I noticed it on my way to work.
    Anyone else have this problem? 

    I went to Apple and they helped me restore my phone to see if that would solve the problem and it did.  Essentially restoring wipes your phone and you start from scratch.  I was able to "restore from backup" and so I didn't lose anything. 

  • Cisco VPN no longer working after firmware update

    I have been using the Cisco VPN network connection to access work; after the recent update, both my Macs stopped working -- no changes have been made.
    Is this a known bug? I looked at the settings, verified everything with no luck.
    Thanks.

    See http://discussions.apple.com/thread.jspa?messageID=12800407&tstart=0. If you want to report this issue to Apple's engineering, send a bug report or an enhancement request via its Bug Reporter system. To do this, join the Mac Developer Program—it's free and available for all Mac users and gets you a look at some development software. Since you already have an Apple username/ID, use that. Once a member, go to Apple BugReporter and file your bug report or enhancement request. The nice thing with this procedure is that you get a response and a follow-up number; thus, starting a dialog with engineering.

  • My car dock is no longer working after iOS 4.3.2 update...help!!

    I have an after market car dock that normally plays music through my car speakers and charges my iphone. After the most recent iOS update it still charges but does not play music. Any ideas?

    Sometimes after iOS updates older tech or even off brand tech may not be supported. I use an older Griffin car charger with an iPhone & iPad and it won't charge because it is not supported. Maybe get a new dock or an Apple approved product, it kinda irritates me as well not being able to use off brand tech. Its cheaper than brand name products...
    Hope this helped

  • Safari no longer works after iOS 8.2 update.

    I installed the iOS 8.2 update and Safari will not work at all.  If I tap a bookmark, it just freezes.  If I manually enter a search term or a url it doesn't respond at all.  I read about some other (not the same) issues with Safari and the common advice was to restore from an iCloud backup, which I have done, to no avail.  Anyone else having the same issue?  Anyone else able to RESOLVE the same issue, and if so, HOW??

    Do this and it should be back up and running.
    1. Backup your iphone to itunes.
    2. Then unplug the iphone from the computer and turn off your iphone
    3. Hold the home button (while the iphone is off) and plug the iphone back to the computer
    4. Restore the iphone using itunes via recovery mode (this will install a fresh set of firmware on your iphone)
    5. Put your files back on your iphone and that will work

  • HTTPS no longer works after iOS upgrade

    Since upgrading to latest iOS (on march 5th, iPhone 5) Safari cannot connect to sites that use https.
    There is no firewall setting I can change - is it certificate problem with all the sites?
    No one else has this issue?

    the time and date are set automatically by the network
    if that was the issue all network users would have same issue
    No one else is having this issue? It is definitely a result of the upgrade which 'fixes' issues in https authentication, right?
    Apple techs? no help here?

  • Exchange email will not work after IOS 5.1 update. Anyone else having same problem. Its been three days now I cannot get mail.

    Exchange Email not working on Iphone 4S is anyone else having the same problem and is there a fix for this?

    @ w3nitro
    I'm having the same issues, except only one of my Exchange accounts took a dive after upgrading to iOS 5.1.  My Gmail account (set up as Exchange) works flawlessly but my native Exchange account (work e-mail) stopped working after the update.
    Post update to 5.1:  (work Exchange account) I could view my inbox and view individuals emails in the inbox, but I was unable to send any emails.  Mail started asking for my password after the update (for the affected Exchange account) but once entered, it failed to verify.
    I completley removed the Exchange account and rentered all the account settings but again, failure to verify any information.  I was hoping my password might have changed but it did not.  Also, maybe the IT guy at the office (not very bright) changed some settings but the only difference is the new iOS update.
    And while playing with the iPhone trying to make it work again, I noticed something really weird.  Old emails (2-3 weeks) from multiple email accounts to include the inop Exchange account started showing up again on the pull down notification menu.  I would clear these out of the notificaion menu but they always kept reapearing; very strange. 

  • Double Click on Magic Mouse No Longer Works after 10.9.1 Mavericks Upgrade

    I just recently updated to Mavericks 10.9.1 and once the computer restarted, I noticed that double-click on my Magic Mouse no longer worked.  I searched the forum and couldn't find anyone experiencing this.  I also went into System Preferences --> Mouse but there is nothing about enabling double-click or adjusting double-click speed on there.
    Would appreciate if someone were able to help me solve this.  Thanks!

    Try resetting the PRAM.
    Shut down your Mac.
    Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.

  • IPhone no longer works after iOS 5.0.1 update

    My iPhone 4 no longer recognizes its SIM card after updating from iOS 5.0 to 5.0.1.
    I followed the instructions in the article on the official Apple support site. Removing and reinserting the SIM card did not help, so I used iTunes to reset the iPhone.
    The result is that after switching on, the iPhone tells me that there is no SIM card in the slot (even if there there is) and that I should insert a SIM card with no PIN lock into the slot.
    I do not have a SIM card with no PIN lock.
    My phone company only distributes SIM cards with a PIN lock.
    What can I do now?

    I had this issue too. I did an OTA update.
    I tried turning off my iPhone, removed and reinserted my SIM and turning it on again a few times without success. I also inserted my wife's SIM, it was OK. When I tried with mine again, it was not. I also tried going in and out of Airplane Mode too without success.
    Afte a bit of trial and error, I finally got it to work.
    What I did was:
    1. Turn off WIFI.
    2. Turn off my iPhone.
    3. Removed and reinserted my SIM.
    4. Turned on my iPhone. Almost immediately I saw the  "3G" indicator and after a couple of seconds, my SIM worked!
    5. Turned WIFI back on.
    From my issue, it seems the iOS 5.0.1 update got "confused" with the network setup.
    HIH.
    Andrew

  • SD CARD READER NO LONGER WORKS after IOS upgrade. Help!

    Does anyone have a suggestion as to how I can get my sd card reader working again? My generation 1 iPad worked fine with it until I updated to IOS5. Today was the first time trying to upload pics since the upgrade. Nothing. Not even an error message. I rebooted and still nothing. SoTHAT was $30 well spent. So now, in order to get the pics onto my iPad, I am sending the pics to myself from my HP laptop, opening the emails on the iPad, and saving from there. The card reader used to work great for pics and videos. Gotta love it when upgrades make so I can no longer do before the "improvements." I would just return the camera kit/card reader, but I purchased it a year ago, so that bird has flown. Suggestions?
    Thanks in advance and Happy Holidays!
    Scott in Barrington, Rhode Island

    Harry Manko wrote:
    Can we get Apple to fix this...PLEASE?
    This is a user-to-user forum. To make sure Apple gets your feedback, use the appropriate link on this page:
    http://www.apple.com/feedback

Maybe you are looking for

  • Using the fileReference class to upload image

    I've been using the loadVars to upload text and pass variables to php and onto the server. I've begun using the Flash Filereference class so an image can be uploaded directly from a Flash movie, not involving an html form. But within the Filereferenc

  • A few basic iDVD questions...

    First, when I create a dvd - and burn it - does it leave video_ts folders anywhere? Or is that only when I create it as a "disc image"? The last burning software I had did both...so I want to make sure this isn't going on my hard drive somewhere wher

  • [SOLVED] ipager does not build. Patched! Now it does.

    Dig in, children. ipager really is the coolest little thing! Some thanks should go to berbae. I just mashed up an AUR comment post of his with a little code fix I located in a blog post at the confignewton tech blog (dittoThanks). This patch superced

  • Some Kernel and optimization related questions

    Last monday I asked about what was the best way to compile a kernel to apply a patch ( solving an hibernation resuming problem). Using the ABS turned to be an easy solution with a shiny patched kernel that works GREAT. Yestertay, I tried e4rat in ord

  • Add fields if required by the customer

    Hello Need to capture mulitple profiles in a single form. Customer should be able to add n number of profiles. That is after adding one profile, an option to add another profile form and fill up.  Don't want to send a 5-10 page long form with the sam