VPN not working with the Arris TG1682G
I have the Arris TG1682G and it seems impossible to get my IP-Sec or SSL based VPN's to work at all. Also, doesn't work with the xfinitywifi connection that is offered for customers without access to their router. It does work fine with the neighbor's Netgear router. It also worked fine with my previous ISP which was Verizon DSL. I see no one else complaining about this model of gateway. I only see people complaining a couple of years ago about a similar device. Comcast hasn't been helpful with a few phone calls. I don't think they understand what is going on. Maybe the equipment is too new. Is there another model that I should ask for instead of this one that will work? I do have Triple play so the phone goes through the box too. I have an old cable modem and cheapo router that I used to use but this gateway is giving me the best wifi signal I have ever gotten. I am hoping to be able to keep this thing.
Thanks for the reply. I was thinking that this might be the way to go, myself but I had a few questions about how to connect/configure the other router. It has a Wan port on the old router, do I connect to that? Will the gateway still retain its good wifi signal and same speeds despite the older router being slower/older? Which router will be giving out the DHCP addresses? Can I just disable the wifi on the older modem? Does the machine that needs the VPN have to be connected to the old router or can it get the wifi signal from the gateway? Sorry for the barrage but whataver you could answer might be helpful.
Similar Messages
-
I have a Macbook and iPhone and like to back up to iCloud. However, my work computer runs Outlook 2003, which I know will not work with the iCloud. The company has no plans to update anytime soon. Since the calendar and contact list on my office computer are my primay ones, I hard sync through iTunes. The problem is that any data synced from Outlook 2003 to the iPhone from iTunes does NOT later backup to iCloud. Is there a solution?
I have the same problem with Outlook 2003 and Win XP which the multinational organisation I work for standardises on and will probably stay with forever!
-
Revision: 5019
Author: [email protected]
Date: 2009-02-19 13:17:21 -0800 (Thu, 19 Feb 2009)
Log Message:
ASDoc updates to indicate that some Halo containers do not work with the Spark equiv (ControlBar does not work with Spark Panel/AppControlBar does not work with Spark Application), and indicate that Canvas, Box, Tile, Panel have Spark equivs
QE Notes: None
Doc Notes: None
Bugs: -
Modified Paths:
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Accordion.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/ApplicationControlBar.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Box.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Canvas.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/ControlBar.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/HBox.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Panel.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/TabNavigator.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Tile.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/VBox.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/ViewStack.asHi DST
This is a great effort and gesture. thank you on behalf of all the newbies.
PJ -
fast dial (visual bookmarks) does not work with the new 5.0 upgrade. How do I correct this issue Asked this question yesterday. I desperately need info, will I ever be able to use fast dial again?
I tried it and it WORKED....I even tried the other version BEFORE this one and it didn't work so I tried yours and it worked like a charm so THANKS brother....
-
ID & password is NOT working with the Menu Bar CC icon
ID & password that I use for the Adobe CC web page login is NOT working with the Menu Bar CC icon (Mac OS 10.10.2). I have two updates to download, but the ID and/or password is rejected. Also the the "Hint" field is blank.https://forums.adobe.com/discussion/create.jspa?containerType=14&containerID=4670&question =true&subject=ID+%26+password+…
If the is prompts like Creative Cloud wants to make changes to system : Please enter Mac username and Password.
-
I would like to create the a swatch, add it to the library and import to the swatch panel. The help pages available relate to earlier versions of Muse, which does not work with the 2014.2 release version that I have. I have created a library folder, imported the colour swatch as just 4 colours as a mulib file. I drag the four colours on to the muse page in design view but that is as far as I get. Can anyone help? Thanks
I don't know since I don't share anything. You'll have to peruse the help files and check the permissions and ACLs on the Shared folder. According to the permissions on the Shared folder everyone can R&W. If you want those to be inherited by everything dropped into the folder, add an ACL for
everyone allow read, write
Details in the manpage for chmod. The actual steps are left as an exercise. -
mistakenly opened all the folders in my library of music and the Finder stopped working.
Now every time I restart the mac, all folders are reopened and can not work with the finder and tried killall-KILL Finder and nothing will reappearmistakenly opened all the folders in my library of music and the Finder stopped working.
Now every time I restart the mac, all folders are reopened and can not work with the finder and tried killall-KILL Finder and nothing will reappear -
i have laptop with digital persona (finger scanning) to automatic feed the passwords. it was working properly with the older version of firefox but is not working with the latest version of the firefox. why? give me a solution.
Please authorize ADE 3 with same credentials that you used with older version of ADE
-
My iPad is not working with the Jensen
My iPad is not working with the Jensen dock
That would be an issue for support from the Jensen dock people.
-
HT1619 my remote is not working with the new imac 27" :(
my remote is not working with the new imac 27" i do not know even if new imac has infrared at all , pcworld shop said yes it should work . but hey i tried everything including security setting checks
<http://store.apple.com/us/product/MC377LL/A/apple-remote>
"Not compatible with MacBook Pro with Retina display or iMac (Late 2012)."
There are some USB IR receivers that allow the Apple Reomote to work with software such as Remote Buddy
<http://www.iospirit.com/products/remotebuddy/> -
The program vectorworks 2008 (not 2009) does not work with the new operating system Mavericks, which is a disaster because it forces us to change the program, and is very expensive. Apple should fix this problem
Why should Apple fix the problem? Maybe you should consider NOT upgrading if an expensive piece of (obsolete) software you're running won't work with it...
-
Wi-Fi to your iPhone does not work with the knowledge that I have worked Restart for the same purpose network does not work What is the solution please help as soon as
Okay, the Wi-Fi doesn't work. Turn it on.
Beyond that, we cannot offer any other assistance as you've failed to provide useful details of the problem.
When responding, post in your native language as your English makes very little sense. -
My ProFire 610 is not working with the OS X Yosemate what do i have to do now with my audio card?
Power cycle the cable modem.. you may try leaving it off 5min.. might be enough.. sometimes you need 15min or even longer.. Followed by power cycle of the AE.
Nothing else should be connected to the modem.. except the router that will get the public IP as they only hand out ONE> -
GUYS MY iPHONE 4 IS NOT WORKING WITH THE SIM CARD IN ZIMBABWE,HOW DO I UNLOCK IT?
GUYS MY iPHONE 4 IS NOT WORKING WITH THE SIM CARD IN ZIMBABWE,HOW DO I UNLOCK IT?
Only the wireless carrier that the iPhone is locked to is capable of unlocking it. You'll have to ask them if they will unlock it. Some will, some won't.
Hope this helps -
My brother have given me his I-phone3 But he lives in US he has given his phone in India The sim card is not working with the phone What should+I need to do?
Send it back to him and have him unlock the phone for you so you can use it with your carrier.
Maybe you are looking for
-
DO NOT BUY AN IPHOTO BOOK!!!!!!!
I have been going at it with Apple now for over a month! I ordered a book and it came back with blank pages and with photos not scaled properly. (This was my second iPhoto book. The first one also had several minor printing flaws which we overlooked)
-
E61i Installing Applications on Start-up
Everytime I switch off and then switch on my Nokia E61i, it will try and install applications on start-up and then display an error message saying that it can't install applications from the memory card and that I should use the application manager i
-
Setting options in "Printer" section using Applescript InDesign CS
How can i set define supplementary options found in the "Printer" section of the InDesign dialog box in a print preset using Applescript? I would like my script to set duplex option with the proper binding, according to the page orientation. When cre
-
Missing schemes in Presentation Director
After installing Presentation Director 4.07, I was shocked to discover all the display schemes missing. I've tried adding new schemes but the program doesn't seem to recognize the notebook LCD display - I'm unable to set the resolution or color depth
-
Order of TV episodes backwards
Hi all, Just bought a mac mini and rigged up to an old G4 monitor (the 21 inch on three legs) with a elgato Eye TV tuner as my media centre. Love it, but have come across a weird quirk with Front Row not listing TV shows in the correct order. I worke