VPN on iPad disconnecting after 20mins

Hello,
I use Strong VPN/Reliable Hosting to connect to VPN (to watch UK TV). I connect with my MacBook Air, older IMac and iPad2. There all ok, but noticed my connection via iPad2 freezes picture after about 20mins. E.g. If I'm watching BBC iPlayer the picture will freeze albeit the VPN is still connected. This always happens about 20 mins into the connection.
this is not the case on my other Mac computers. I wonder if anyone can help me to solve this mystery? Is it a DNS thing?
thank you.

It looks like Apple has a another bug to squash.  It appears the issue with locking up my C1000A has to due with IPV6.  I hit the reset button on my modem and IPV6 was turned off.  I turned IPV6 back on and while I was testing connectivity with http://test-ipv6.com  my modem locked up.  I turned off IPV6 and no issues so far.

Similar Messages

  • How do you resolve the problem of ipad not staying connected to internet. other laptops remain connected but ipad just disconnects after about 5 seconds.

    how do you resolve the problem of ipad not staying connected to internet when other devices are connected. Ipad disconnects after about 5 seconds.

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    Additional things to try.
    Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    On your iPad go to Settings > General > Reset > Reset network settings and see if that enables you to connect.
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
     Cheers, Tom

  • My VPN keeps disconnecting after downloaded iOS 8. How do I fix this?

    my VPN keeps disconnecting after I have downloaded iOS 8 on my iPad. Why is this happening? How can I fix it?

    I am having similar issues. IPad mini ios 8.0.2. VPN connection will drop unexpectedly. Actually, it drops coincide with an active application that uses a lot of memory. Such as a web browser. I can 100% replicate behavior by connecting VPN, going to Safari, and opening Facebook. If I don't use an app that is memory-intensive, VPN stays connected indefinitely.

  • SQL Developer on Linux hangs when disconnecting after VPN reconnect

    Hello,
    I have a problem with using connections after general link failure (Cisco VPN disconnect in my case, lost of route to Oracle DB).
    When I reconnect to a VPN and I'll try to disconnect from a previously opened (before general link failure) connection, I need
    to wait more than 10 minutes to complete this process. SQL Developer is completely unusable during this time.
    Steps to reproduce:
    1. Connect to VPN
    2. Open connection in SQL Developer to host accessible only by this VPN
    3. Restart VPN
    4. Try to do anything with this connection (disconnect, execute sql in opened SQL Worksheet, view tables, etc.)
    This bug is not new in recent versions, I'm using SQL Developer from over 2 years and this bug was always with me. But if I remember correctly in earlier versions (<3.0) I couldn't reuse the connection to execute sql (hanging SQL Developer for more than 10 minutes) but disconnecting would succeed without a problem.
    Maybe SQL Developer should move connection management to separate thread to resolve this issue... or is there another solution?
    I'm using SQL Developer 3.1.07.42 @ Linux 3.0.4
    For VPN connectivity I use vpnc
    When I restart VPN connection I'm loosing TUN interface and all routes.
    I have tested this issue on a few versions of SQL Developer on Windows XP, including 3.1.07. There is no problem with disconnecting after vpn failure on Windows.
    Maybe I should fill some bug report? When I can do such thing? Metalink?
    Best regards,
    Irek Slonina

    Hi Irek,
    Possibly you can resolve this issue by altering the type of the connection that becomes non-responsive upon a VPN reconnect. What type are you currently using: Basic, TNS, etc?
    In this forum thread (for Windows, unfortunately, not Linux), although different from your case, the solution used Thick/OCI driver, not Thin/Basic:
    Windows 7 VPN
    I have no VPN client on Linux (much less vpnc), only Cisco AnyConnect on Win XP, so I cannot test your scenario.
    Regards,
    Gary
    SQL Developer Team

  • "iTunes could not back up the iPad because the iPad disconnected" error message after upgrading to 8.3

    Yesterday I upgraded my iPad Air from 7.1.2 to 8.3 after holding off upgrading until now. Before the upgrade I backed up the iPad without any problems but since the upgrade I can't back up the iPad – it goes to step 2 of 4 and stays there for ages, and then I get a pop up box saying "iTunes could not back up the iPad "...  iPad" because the iPad disconnected."
    I've just tried setting up iTunes on another PC and backing up the iPad to this iTunes and got the same error message so it's not the iTunes setup on either computer (Windows 7 PCs).
    Everything I've tried so far seems to be working on the iPad but I can't do any backups.
    Any suggestions on what else to try will be much appreciated.

    Sometimes resetting the iPad system helps. Did you try that? If not, try it. Hold down on the sleep and home buttons at the same time for about 10 seconds until the Apple logo appears on the screen, then let go of the buttons and let the iPad start up. Then try to backup again.

  • Why when I use personal hotspot at my iPad mini retina for my iPhone it doesn't stay for long,it disconnect after 5minute

    Please...
    Why when I use personal hotspot at my iPad mini retina for my iPhone it doesn't stay for long,it disconnect after 5minute

    Assuming you are using OSX, connect iphone ny usb then go to system preferences. Go to network pane and scroll down to "wheel" and from the drop down select service order. If you see the iphone then drag it to the top of the list then select apply.

  • VPN Disconnection After iPhone Locks

    I'm not sure if anyone else has this issue, but a fix/explanation would be helpful.
    Whenever I am on a VPN connection [with 3G as it seems EDGE doesn't want to let me connect another issue entirely] - it disconnects after about a few minutes of being locked. Part of me thinks this has to do with the issues with 3G where it switches unnecessarily.
    Hopefully one of you who uses VPN experiences this as well and can help me out!
    Thanks kindly,
    Chris

    Thanks for your post, I have the same problem, but when I asked IT about this, they told me that we authenticate users in a different way.
    You wrote: "*The fix was to configure the Cisco firewall VPN user account to allow the client to save the password locally, you must goto the user account and un-check the "inherit" and then the option of "NO" or "YES" can be selected*"
    I'm not from IT, but they told me we are using a Cisco ASA 5520 and using user validation by Radius authentication against Active Directory and IAS (Internet authentication Service)
    That we don't handle user authentication by Cisco, so there is no way to tell Cisco to allow the users to store the passwords. What Cisco validates is a Group and then passes the rest to the AD.
    Any suggestion?

  • Blank login screen on the iPad keeps popping up and wifi disconnecting after 20 seconds

    hi, we have an ipad running IOS 5 that keeps having a blank login screen on the iPad keeps popping up and wifi disconnecting after 20 seconds. 
    I am yet to find out why this is, any clues?  (note that both apple.com and facebook are blocked at the router, but nothing else)...

    actually we cannot due to policy reasons... it appears through testing that the iPad is phoning home and sending private data to Apple regardless, it is also odd they placed these PRIVACY settings in About hidden away so that no-one knows they are there.
    From the iPad homescreen, tap on Settings > General > About
    Tap on "Diagnostics & Usage" > select "Don't Send"
    So... anyone else know why if we block Apple, the iPad disconnects from the internet via Wifi?

  • HT1212 My iPad locked after 1 incorrect passcode entry and I tried what a senior advisor told my to do, but it could not download the info unless I entered the correct pass code, which I can not do since it does not give me the opportunity.

    My iPad locked after 1 incorrect passcode entry and I tried what a senior advisor told my to do, but it could not download the info unless I entered the correct pass code, which I can not do since it does not give me the opportunity.  How do I get the window to enter my pass code?

    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • Ipad disabled after wrong password, is there a reset option?

    Our iPad 2 (running iOS 7) is disabled, after six attempts at the password which had been changed 24 hours earlier, it appears to be permanently disabled.
    I have work files in apps that were not backed up, is there anyway to recover from this stage? 
    Please help.

    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    You may have to do this several times.
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • Ipads Disconnecting While Roaming (WPA2, 802.1x, Radius)

                       We are having an issue that is apparently only affecting Apple Ipads. These are user devices that we are allowing connections to "Guest" SSID through an anchor to our DMZ. They are authenticating over 802.1x to our internal Radius server. Below is the debug of one of the Ipads disconnecting while roaming. After about 10 seconds the connection will resume. This is occuring on a 5508 WLC running 7.0.98.218 code and 1142 APs. Ipad is running 6.0.2 firmware. Any help is greatly appreciated!
    Jan 30 08:59:05.036: b4:f0:ab:d6:c7:a3 DHCP   siaddr: 0.0.0.0,  giaddr: 0.0.0.0
    *DHCP Socket Task: Jan 30 08:59:05.036: b4:f0:ab:d6:c7:a3 DHCP   server id: 1.1.1.1  rcvd server id: 1.1.1.1
    *DHCP Socket Task: Jan 30 08:59:05.036: b4:f0:ab:d6:c7:a3 DHCP successfully bridged packet to STA
    *mmListen: Jan 30 08:59:06.417: CCKM: Creating CCKM cache entry(version 2) on receiving message from mobility
    *spamReceiveTask: Jan 30 08:59:06.417: CCKM: Send CCKM cache entry
    *Dot1x_NW_MsgTask_5: Jan 30 08:59:49.661: CCKM: Sending CCKM PMK (Version_2) information to mobility group
    *spamReceiveTask: Jan 30 08:59:49.662: CCKM: Send CCKM cache entry
    *apfReceiveTask: Jan 30 09:00:10.386: b4:f0:ab:d6:c7:a3 192.168.149.93 RUN (20) State Update from Mobility-Complete to Mobility-Incomplete
    *apfReceiveTask: Jan 30 09:00:10.386: b4:f0:ab:d6:c7:a3 Clearing Address 192.168.149.93 on mobile
    *apfReceiveTask: Jan 30 09:00:10.386: b4:f0:ab:d6:c7:a3 apfMsRunStateDec
    *apfReceiveTask: Jan 30 09:00:10.386: b4:f0:ab:d6:c7:a3 192.168.149.93 RUN (20) Change state to DHCP_REQD (7) last state RUN (20)
    *apfReceiveTask: Jan 30 09:00:10.386: b4:f0:ab:d6:c7:a3 apfMmProcessDeleteMobile (apf_mm.c:532) Expiring Mobile!
    *apfReceiveTask: Jan 30 09:00:10.386: b4:f0:ab:d6:c7:a3 apfMsExpireMobileStation (apf_ms.c:4897) Changing state for mobile b4:f0:ab:d6:c7:a3 on AP b4:14:89:15:b9:90 from Associated to Disassociated
    *apfReceiveTask: Jan 30 09:00:10.386: b4:f0:ab:d6:c7:a3 apfMsAssoStateDec
    *apfReceiveTask: Jan 30 09:00:10.386: b4:f0:ab:d6:c7:a3 apfMsExpireMobileStation (apf_ms.c:5018) Changing state for mobile b4:f0:ab:d6:c7:a3 on AP b4:14:89:15:b9:90 from Disassociated to Idle
    *apfReceiveTask: Jan 30 09:00:10.386: b4:f0:ab:d6:c7:a3 0.0.0.0 DHCP_REQD (7) Deleted mobile LWAPP rule on AP [b4:14:89:15:b9:90]
    *apfReceiveTask: Jan 30 09:00:10.386: b4:f0:ab:d6:c7:a3 Username entry deleted for mobile
    *apfReceiveTask: Jan 30 09:00:10.386: b4:f0:ab:d6:c7:a3 apfMs1xStateDec
    *apfReceiveTask: Jan 30 09:00:10.386: b4:f0:ab:d6:c7:a3 Deleting mobile on AP b4:14:89:15:b9:90(0)
    *pemReceiveTask: Jan 30 09:00:10.388: b4:f0:ab:d6:c7:a3 0.0.0.0 Removed NPU entry.
    *mmListen: Jan 30 09:00:16.057: CCKM: Creating CCKM cache entry(version 2) on receiving message from mobility

    I wish I can share the email I was given. But, the largest healthcare system in the US discovered a roaming issue with iOS devices on 6.0.1 and 6.0.2.
    "This is purely a device decision problem, not a infrastructure problem, as depicted below. We found that the devices, while roaming, respond incorrectly to the request for identity... creating roaming delays of 30 seconds and more. "
    "Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin
    ‎"I'm in a serious relationship with my Wi-Fi. You could say we have a connection."

  • HT4199 this still didn't fix iPad connectivity after updating to iOS 6.0.1 !!! intermittent wi-fi connection, even with a direct line-of-sight to the router.

    "HT4199: iOS and OS X: Recommended settings for Wi-Fi routers and access points"
    this still didn't fix iPad connectivity after updating to iOS 6.0.1 !!! intermittent wi-fi connection, even with a direct line-of-sight to the router.

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    iOS 6 Wifi Problems/Fixes
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Why does my iMac WIFI disconnect after 3-4 Hours?

    I have an iMac 3.06 Intel Core 2 and my wifi disconnects after 3-4 hours of use. I can't reconnect to the network until I turn-off the wifi and turn it back on. It appears the ip lease time is up and must be established manually by turning off the wifi and turning it back on (just a guess). Is it possible the firewall or another piece of software is blocking the process? I have an iPhone, MacBook and iPad in addition to the iMac and they all connect properly and stay connected. Does anyone have any ideas what I should verify to get the process working? During the period of time when the iMac is connected all is well. The iMac is running 10.7.2 op system. Thanks for your help.

    I'm havingn the same problem

  • My ipad disconnects from the wifi link

    My ipad disconnects from the wifi link

    Try #5 below.
    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    iOS 6 Wifi Problems/Fixes
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    Wi-Fi or Bluetooth settings grayed out or dim
    http://support.apple.com/kb/TS1559
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • How to activite ipad locked after wrong password

    I have a many  passwords that I use for my Ipads, Iphones and Macbook Pro. I have just forgotten the one I was used to enter in order to use my Ipad 64. Now the Ipad is locked and keeps on asking me to try again again after 15 minutes, 60 minutes etc..

    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

Maybe you are looking for

  • Need to know how to get my apple account to sync up with a new email on my phone and delete the old one in a step by step process??

    Need to know how to get my apple account to sync up with a new email on my phone and delete the old one in a step by step process??

  • How do I trim the file size?

    All of a sudden I went from 400MB for a 2.5 minute movie to over 1GB with a 3.5M movie. Are there any tricks to trimming the file size so I can upload to websites? I am @ 104GB and need to shave 5GB off the file size, which should be 750GB. Any help

  • Editing link properties

    This is probably an easy question, but here goes. I'm working with a Latex application that outputs PDFs. However, it has the odd quirk of outputting all URLs in pink and all internal links (cross referencing, table of contents) in red. I would like

  • Border around some links...

    Borders around menu options on certain pages and not sure why I created the pages in Photoshop, used Imageready to output my site to HTML, then linked everything in Dreamweaver. On most of the pages there are no problems, but certain pages http://www

  • Why can't I see the whole image?

    I can not see the whole image in the viewing area. All I get is a partial rectangular section, with the rest being either white, or checkerboard. It doesn't matter what size the image is, nor how many layers, or even whether I use the 32 or 64 bit ve