VPN PPTP Default Port

Hello all,
sorry if this question has already been asked, but I couldn't find anything via search.
I have a VPN PPTPD Server running (somewhere on the internet) and it's a Debian machine. I configured it not to run on default port but to use 8080. My question ist now; ho can I tell the default VPN client of OS X (10.6) to connect on my custom port.
The thing is, that it works with default port very fine, but as soon as I change it to 8080 I cannot connect and if I put "myserver.com:8080" in the server field, then it seems like it could not be resolved.
I would be very greatful for any kind of hint.
Thanks in advance!
Best regards,
Kamil

up !
Please let me know if you got the hack.

Similar Messages

Tiger VPN (PPTP) connection issues

Hello everyone.
I'm having major issues trying to connect to office VPN from home; hoping someone can point me in the right direction. (And my profound apologies in advance for the long post -- just trying make sure to include enough detail to debug whatever might be happening)
At the office we have a 3Com OfficeConnect VPN Firewall sitting in front of a Microsoft 2003 Exchange server. (3Com product page for this VPN box is http://www.3com.com/products/en_US/detail.jsp?tab=features&sku=3CR870-95&pathtyp e=purchase). Home connection is a Linksys WRT54GL wireless router in front of a broadband cable modem. PPTP pass-through is enabled in the router config.
At home I have a WinXP-SP2 laptop and my G4 Powerbook (OS 10.4.7) sitting side-by-side. From the XP laptop, I can get into the VPN using XP's built-in client without any problems. The DNS lookup and authentication steps take about 2-3 seconds combined. Once the connection is established, both external sites (cnn.com) and internal sites (intranet.companyname.local) load in a browser window without any appreciable delay. I can also access Windows shared drives on the internal network without problems, including large (10's of MB or more) file copies to/from the XP laptop's HD.
On the Powerbook, using Tiger's built-in VPN client, I can connect OK (though the authentication step takes a bit longer, about 4-5 seconds), but after that, almost nothing works. I can ping the internal DNS server, but after a few pings with reasonable delays (~15 millisecond range), the round-trip times suddenly jump to handfuls of seconds. In the browser, trying to load an internal webpage (http://intranet.companyname.local) times out before anything shows up on screen. In Finder, using Go>Connect to Server... very slowly establishes the connection (~10-15 seconds or longer), and sometimes opens a Finder window... but then invariably times out. I have never once had the connection remain stable enough to transfer so much as a single file from the shared volume onto the Powerbook's Desktop before it times out and disconnects.
On the XP machine, relevant(?) VPN config settings are:
require secured password
require data encryption (disconnect if none)
PPTP VPN
LCP extensions enabled
software compression enabled
multi-link negotiation for single link connections DISABLED
server type = PPP
transports = TCP/IP
authentication = MS CHAP
encryption = MPPE 128
compression = none
PPP multilink framing = off
and, once the VPN connection is established, parameters are (from "ipcofig /all"):
Windows IP Configuration
Host Name . . . . . . . . . . . . : (companyname)-hj2
Primary Dns Suffix . . . . . . . : (companyname).local
Node Type . . . . . . . . . . . . : Unknown
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : (companyname).local
Ethernet adapter Wireless Network Connection:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Intel(R) PRO/Wireless 2915ABG Network Connection
Physical Address. . . . . . . . . : XX-XX-XX-XX-XX-XX
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : 192.168.1.104
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.1.1
DHCP Server . . . . . . . . . . . : 192.168.1.1
DNS Servers . . . . . . . . . . . : 192.168.1.1
PPP adapter (ConnectionName):
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : WAN (PPP/SLIP) Interface
Physical Address. . . . . . . . . : XX-XX-XX-XX-XX-XX
Dhcp Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 172.16.0.70
Subnet Mask . . . . . . . . . . . : 255.255.255.255
Default Gateway . . . . . . . . . : 172.16.0.70
DNS Servers . . . . . . . . . . . : 172.16.0.11
finally, results of "ping -n 10 (InternalServer)":
Pinging (InternalServer).(companyname).local [172.16.0.5] with 32 bytes of data:
Reply from 172.16.0.5: bytes=32 time=4ms TTL=128
Reply from 172.16.0.5: bytes=32 time=10ms TTL=128
Reply from 172.16.0.5: bytes=32 time=10ms TTL=128
Ping statistics for 172.16.0.5:
Packets: Sent = 10, Received = 10, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 4ms, Maximum = 10ms, Average = 9ms
On the Powerbook, I have a VPN (PPTP) connection set up with "Send all traffic over VPN connection" unchecked. In the Network panel of System Preferences, I have tried manually adding (and removing) "local, (companyname).local" in the Search Domains line, and manually adding (and removing) the IPs of our internal DNS servers (172.16.0.5, 172.16.0.11) under the TCP/IP tab. Proxies are turned off in all cases.
With those settings, the relevant(?) parts of running "ifconfig" from a Terminal window after starting the VPN are as follows:
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
inet 127.0.0.1 netmask 0xff000000
en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet6 fe80::XXX:XXXX:XXXX:XXXX%en1 prefixlen 64 scopeid 0x5
inet 192.168.1.100 netmask 0xffffff00 broadcast 192.168.1.255
ether XX:XX:XX:XX:XX:XX
media: autoselect status: active
supported media: autoselect
fw0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 4078
lladdr XX:XX:XX:XX:XX:XX:XX:XX
media: autoselect <full-duplex> status: inactive
supported media: autoselect <full-duplex>
ppp0: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1444
inet 172.16.0.69 --> 172.16.0.11 netmask 0xffff0000
The associated connection log from Internet Connect is:
Tue Jul 18 08:50:57 2006 : PPTP connecting to server 'vpn.(companyname).com' (XXX.XXX.XXX.XXX)...
Tue Jul 18 08:50:57 2006 : PPTP connection established.
Tue Jul 18 08:50:58 2006 : using link 0
Tue Jul 18 08:50:58 2006 : Using interface ppp0
Tue Jul 18 08:50:58 2006 : Connect: ppp0 <--> socket[34:17]
Tue Jul 18 08:50:58 2006 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xb851f701> <pcomp> <accomp>]
Tue Jul 18 08:50:58 2006 : rcvd [LCP ConfReq id=0x1 <mru 1492> <auth chap MS> <magic 0x80697000>]
Tue Jul 18 08:50:58 2006 : lcp_reqci: returning CONFACK.
Tue Jul 18 08:50:58 2006 : sent [LCP ConfAck id=0x1 <mru 1492> <auth chap MS> <magic 0x80697000>]
Tue Jul 18 08:50:58 2006 : rcvd [LCP ConfRej id=0x1 <asyncmap 0x0> <pcomp> <accomp>]
Tue Jul 18 08:50:58 2006 : sent [LCP ConfReq id=0x2 <magic 0xb851f701>]
Tue Jul 18 08:50:58 2006 : rcvd [LCP ConfAck id=0x2 <magic 0xb851f701>]
Tue Jul 18 08:50:58 2006 : sent [LCP EchoReq id=0x0 magic=0xb851f701]
Tue Jul 18 08:50:58 2006 : rcvd [CHAP Challenge id=0x1 <4f0656add65818c2>, name = "Guest"]
Tue Jul 18 08:50:58 2006 : sent [CHAP Response id=0x1 <0000000000000000000000000000000000000000000000004c86e5ccf08b95431034ef14706021 d358dc21b96a59157301>, name = "(UserName)"]
Tue Jul 18 08:50:58 2006 : rcvd [LCP EchoRep id=0x0 magic=0x80697000]
Tue Jul 18 08:50:58 2006 : rcvd [CHAP Success id=0x1 "Authentication succeeded, welcome!"]
Tue Jul 18 08:50:58 2006 : CHAP authentication succeeded: Authentication succeeded, welcome!
Tue Jul 18 08:50:58 2006 : Disabling 40-bit MPPE; MS-CHAP LM not supported
Tue Jul 18 08:50:58 2006 : sent [CCP ConfReq id=0x1 <mppe +H -M +S -L -D -C>]
Tue Jul 18 08:50:58 2006 : rcvd [IPCP ConfReq id=0x1 <addr 172.16.0.11> <ms-dns3 0.0.0.0> <ms-wins 0.0.0.0>]
Tue Jul 18 08:50:58 2006 : sent [IPCP TermAck id=0x1]
Tue Jul 18 08:50:58 2006 : rcvd [CCP ConfReq id=0x1 <mppe +H +M +S +L -D -C>]
Tue Jul 18 08:50:58 2006 : sent [CCP ConfNak id=0x1 <mppe +H -M +S -L -D -C>]
Tue Jul 18 08:50:58 2006 : rcvd [CCP ConfAck id=0x1 <mppe +H -M +S -L -D -C>]
Tue Jul 18 08:50:58 2006 : rcvd [CCP ConfReq id=0x2 <mppe +H -M +S -L -D -C>]
Tue Jul 18 08:50:58 2006 : sent [CCP ConfAck id=0x2 <mppe +H -M +S -L -D -C>]
Tue Jul 18 08:50:58 2006 : MPPE 128-bit stateless compression enabled
Tue Jul 18 08:50:58 2006 : sent [IPCP ConfReq id=0x1 <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>]
Tue Jul 18 08:50:58 2006 : sent [IPV6CP ConfReq id=0x1 <addr fe80::020a:95ff:fea5:564c>]
Tue Jul 18 08:50:58 2006 : sent [ACSCP] 01 01 00 10 01 06 00 00 00 01 02 06 00 00 00 01
Tue Jul 18 08:50:58 2006 : rcvd [LCP ProtRej id=0x1 80 57 01 01 00 0e 01 0a 02 0a 95 ff fe a5 56 4c]
Tue Jul 18 08:50:58 2006 : rcvd [LCP ProtRej id=0x2 82 35 01 01 00 10 01 06 00 00 00 01 02 06 00 00 00 01]
Tue Jul 18 08:50:58 2006 : rcvd [IPCP ConfRej id=0x1 <ms-dns3 0.0.0.0>]
Tue Jul 18 08:50:58 2006 : sent [IPCP ConfReq id=0x2 <addr 0.0.0.0> <ms-dns1 0.0.0.0>]
Tue Jul 18 08:50:58 2006 : rcvd [IPCP ConfNak id=0x2 <addr 172.16.0.69> <ms-dns1 172.16.0.11>]
Tue Jul 18 08:50:58 2006 : sent [IPCP ConfReq id=0x3 <addr 172.16.0.69> <ms-dns1 172.16.0.11>]
Tue Jul 18 08:50:58 2006 : rcvd [IPCP ConfAck id=0x3 <addr 172.16.0.69> <ms-dns1 172.16.0.11>]
Tue Jul 18 08:51:01 2006 : sent [IPCP ConfReq id=0x3 <addr 172.16.0.69> <ms-dns1 172.16.0.11>]
Tue Jul 18 08:51:01 2006 : rcvd [IPCP ConfAck id=0x3 <addr 172.16.0.69> <ms-dns1 172.16.0.11>]
Tue Jul 18 08:51:04 2006 : sent [IPCP ConfReq id=0x3 <addr 172.16.0.69> <ms-dns1 172.16.0.11>]
Tue Jul 18 08:51:04 2006 : rcvd [IPCP ConfAck id=0x3 <addr 172.16.0.69> <ms-dns1 172.16.0.11>]
Tue Jul 18 08:51:07 2006 : sent [IPCP ConfReq id=0x3 <addr 172.16.0.69> <ms-dns1 172.16.0.11>]
Tue Jul 18 08:51:07 2006 : rcvd [IPCP ConfAck id=0x3 <addr 172.16.0.69> <ms-dns1 172.16.0.11>]
Tue Jul 18 08:51:08 2006 : rcvd [IPCP ConfReq id=0x1 <addr 172.16.0.11> <ms-dns3 0.0.0.0> <ms-wins 0.0.0.0>]
Tue Jul 18 08:51:08 2006 : ipcp: returning Configure-REJ
Tue Jul 18 08:51:08 2006 : sent [IPCP ConfRej id=0x1 <ms-dns3 0.0.0.0> <ms-wins 0.0.0.0>]
Tue Jul 18 08:51:08 2006 : rcvd [IPCP ConfReq id=0x2 <addr 172.16.0.11>]
Tue Jul 18 08:51:08 2006 : ipcp: returning Configure-ACK
Tue Jul 18 08:51:08 2006 : sent [IPCP ConfAck id=0x2 <addr 172.16.0.11>]
Tue Jul 18 08:51:08 2006 : ipcp: up
Tue Jul 18 08:51:08 2006 : local IP address 172.16.0.69
Tue Jul 18 08:51:08 2006 : remote IP address 172.16.0.11
Tue Jul 18 08:51:08 2006 : primary DNS address 172.16.0.11
The problem is that despite this apparently successful negotiation, the VPN connection doesn't really work. If I type "intranet" into the browser URL bar, it doesn't pick it up as "intranet.companyname.local" and instead treats this as a search query, which it passes to google... which times out. If I type "intranet.companyname.local" into the URL bar instead, it appears to do the DNS lookup correctly... but then times out again.
Ping times look like this at first:
PING (InternalServer).(companyname).local (172.16.0.5): 56 data bytes
64 bytes from 172.16.0.5: icmp_seq=0 ttl=128 time=16.605 ms
64 bytes from 172.16.0.5: icmp_seq=1 ttl=128 time=15.920 ms
64 bytes from 172.16.0.5: icmp_seq=2 ttl=128 time=16.154 ms
^C
--- (InternalServer).(companyname).local ping statistics ---
3 packets transmitted, 3 packets received, 0% packet loss
round-trip min/avg/max/stddev = 15.920/16.226/16.605/0.284 ms
... but then if I try it again two seconds later:
PING (InternalServer).(companyname).local (172.16.0.5): 56 data bytes
64 bytes from 172.16.0.5: icmp_seq=0 ttl=128 time=727.144 ms
64 bytes from 172.16.0.5: icmp_seq=1 ttl=128 time=1727.030 ms
64 bytes from 172.16.0.5: icmp_seq=2 ttl=128 time=2727.260 ms
64 bytes from 172.16.0.5: icmp_seq=3 ttl=128 time=3726.747 ms
64 bytes from 172.16.0.5: icmp_seq=4 ttl=128 time=5723.986 ms
64 bytes from 172.16.0.5: icmp_seq=5 ttl=128 time=5719.810 ms
64 bytes from 172.16.0.5: icmp_seq=6 ttl=128 time=6720.334 ms
64 bytes from 172.16.0.5: icmp_seq=7 ttl=128 time=6719.848 ms
^C
--- (InternalServer).(companyname).local ping statistics ---
15 packets transmitted, 8 packets received, 46% packet loss
round-trip min/avg/max/stddev = 727.144/4224.020/6720.334/2176.543 ms
OK, enough for now. Can anyone spot what I might be doing wrong, and/or suggest something to try to remedy this? If there is any additional logging/debug info that would be useful, please ask and I will track it down.
Thanks very much in advance!!! /HJ

Problem not entirely solved, but mostly working now. It turns out the issue was with the 3Com OfficeConnect VPN box. It was causing all sorts of headaches and had to be manually power cycled at least once a week, so we ditched it and got a Linux-based Firewall/VPN appliance (http://www.ingate.com/ingate_vpn.php).
Now I can connect and mount Windows drives via SMB (both the command line and the Finder's "Connect to Server" approach seem to work). Performance still exhibits annoying lags at random times, and occasionally the VPN connection disconnects for no good reason, but at least I can get at my files from home. The other issues -- such as being able to resolve "xxx.yyy.local" addresses in the browser by making sure I hit the internal DNS server before any external ones -- all seem to be network configuration issues on my end.
In short, my guess is that the 3Com box was causing issues with some low-level timing parameters or other related settings in how the VPN connection was being established. I was just starting to teach myself about ARP tables, NTLMv2 authentication, and the like when we replaced it with the new firewall.
Hope this helps.
/Heywood

VPN (PPTP) Authentication Failed

Hi,
I am trying to Connect to my work network. Work uses a Secure Computing SG560.
The setup at work on the SG560 is as follows:
PPTP VPN Server
Authentication Scheme: Weakly Encrypted Authentication (CHAP)
Encryption: Strong Encryption (MPPE 128 Bit)
On my mac, I have setup a new VPN (PPTP) Connection
Given it the Internet Address
My Account Name
Encryption Auto (And tried Maximum)
Authentication Settings is password with my password set on the SG560.
Pressing Connection I get a prompt saying Authentication failed
In my console I have this (obviously some settings omitted)
6/12/10 06/12/10 - 9:06:48 PM pppd[1825] pppd 2.4.2 (Apple version 412.3) started by wt9bind, uid 501
6/12/10 06/12/10 - 9:06:48 PM pppd[1825] PPTP connecting to server 'x.x.x.x' (x.x.x.x)...
6/12/10 06/12/10 - 9:06:48 PM pppd[1825] PPTP connection established.
6/12/10 06/12/10 - 9:06:48 PM pppd[1825] Connect: ppp0 <--> socket[34:17]
6/12/10 06/12/10 - 9:06:48 PM pppd[1825] MS-CHAP authentication failed:
6/12/10 06/12/10 - 9:06:48 PM pppd[1825] Connection terminated.
6/12/10 06/12/10 - 9:06:48 PM pppd[1825] PPTP disconnecting...
6/12/10 06/12/10 - 9:06:48 PM pppd[1825] PPTP disconnected
The only way to get this working is to change the Authentication Scheme in the SG560 to No Auth
If I do this, it connects perfectly with the following:
6/12/10 06/12/10 - 9:09:15 PM kernel utunctlconnect: creating interface utun0
6/12/10 06/12/10 - 9:09:16 PM pppd[1839] pppd 2.4.2 (Apple version 412.3) started by wt9bind, uid 501
6/12/10 06/12/10 - 9:09:16 PM pppd[1839] PPTP connecting to server 'x.x.x.x' (x.x.x.x)...
6/12/10 06/12/10 - 9:09:16 PM pppd[1839] PPTP connection established.
6/12/10 06/12/10 - 9:09:16 PM pppd[1839] Connect: ppp0 <--> socket[34:17]
6/12/10 06/12/10 - 9:09:17 PM pppd[1839] local IP address x.x.x.x
6/12/10 06/12/10 - 9:09:17 PM pppd[1839] remote IP address x.x.x.x
6/12/10 06/12/10 - 9:09:17 PM pppd[1839] primary DNS address x.x.x.x
6/12/10 06/12/10 - 9:09:17 PM pppd[1839] secondary DNS address x.x.x.x
6/12/10 06/12/10 - 9:09:17 PM configd[14] network configuration changed.
6/12/10 06/12/10 - 9:09:17 PM pppd[1839] pptpwaitinput: Address added. previous interface setting (name: en0, address: 192.168.1.9), current interface setting (name: ppp0, family: PPP, address: x.x.x.x, subnet: 255.255.0.0, destination: x.x.x.x).
6/12/10 06/12/10 - 9:09:17 PM configd[14] network configuration changed.
6/12/10 06/12/10 - 9:09:17 PM vmnet-bridge[234] Dynamic store changed
6/12/10 06/12/10 - 9:09:17 PM vmnet-bridge[234] Could not retrieve media for interface ppp0: Operation not supported on socket.
6/12/10 06/12/10 - 9:09:17 PM kernel vmnet: VMNetDisconnect called for port 0xf8f9f00
6/12/10 06/12/10 - 9:09:17 PM kernel vmnet: Invalidating peer info for hub: 0, port: 0
6/12/10 06/12/10 - 9:09:17 PM kernel vmnet: bridge-en0: filter detached
6/12/10 06/12/10 - 9:09:17 PM kernel vmnet: bridge-en0: down
6/12/10 06/12/10 - 9:09:17 PM kernel vmnet: bridge-en0: detached
6/12/10 06/12/10 - 9:09:17 PM kernel vmnet: Freeing hub at 0xe45a000.
Now obviously running no auth is totally unacceptable.
The options in the SG560 for Authentication Scheme is:
PAP
CHAP
MS-CHAP
MS-CHAPV2
Required Encryption:
No Encryption
Basic Encryption MPPE 40Bit
Strong Encryption MPPE 128Bit
Can somebody tell me why my client on my mac will not connect as soon as the encryption level is changed on the SG560? It works perfectly from Windows.
Thanks

Can anybody help me on this?

How to change the default port of webdispatcher

Hello Everyone,
We wish to know to how to change the default port of SAP webpatcher port from 81$$ to 80.
Appreciate your response.
Thanks,
Vadi

Hello Vadi
you have to change the PORT value in your profile parameter from 81$$ to 80
icm/server_port_0 = PROT=HTTP,PORT=81$$ to
icm/server_port_0 = PROT=HTTP,PORT=80
Also, in SMICM, then change http service port and activate it and above parameter will require SAP restart
$$ is used generally to accomodate multiple port services running in SMICM and so as to avoid the parameter setting according to instance number of any system.
thanks
Bhudev

How to change default port in iws 4.1 installed in Solaris 5.9

Hi All,
I had installed iws 4.1 in solaris 5.9
Now , I want to change my default https port from 443 to 445 .
Can anybody , Please let me know the proceudre how to do it ?
Thanks for help in advance.
Regards
James

Ya , Manish you are right IWS 4.1 is really old.
But My application has been developed in past that is using IWS4.1 .
Right now , we are not having budget to migrate it from IWS4.1 to IWS6.1.
And the pointer for changing the port from magnus.conf is also correct but
I need to make it default port.
That means If would not specify any port number out of two port request goes to default one.
Right now default port is 443
But I want it to be 445
Thanks
James
Message was edited by:
write2jamesbond

How to change default port in 9.2?

Hi,
In 8.1, when I run config wizard, I may assign listening port. But I could not do so in 9.2. I tried to modify startscript.xml and tokenValue.properties under base_domain\init-info\, it did not work. Does anyone know how to change the default port 7001 to other port?
Thanks

Login via the console, select environment, servers. Select your server, you should see the greyed out Listen Port attribute (you should be in the general tab). Click lock and edit on the top left hand corner of the console and edit your listen port.
The config.xml does not explicitly define stanzas for some default values (Same as earlier releases), I personally don'tlike this. If you change the default value it should reappear in it.

Hussein Badakhchani

How to use non default port 1521 while 11.2.0.1 grid upgrade to 11.2.0.2

Hi Team ,
We are planning 11.2.0.1 Grid infra rolling upgrade to 11.2.0.2 with out any downtime.
But while up gradation due to default scan port 1521 , 11.2.0.1 databases are not able to connect (remote connections)
We are using 1900 port for existing 11.2.0.1 grid infra scan.
While up gradation it is taking default port of 1521 insted of existing port 1900.
Please provide the solution to use non default port while 11.2.0.2 up gradation.
After upgrade the status as below.
grdoratst104:/apps/grid/grdhome:+ASM4> srvctl config scan_listener
SCAN Listener LISTENER_SCAN1 exists. Port: TCP:1521
SCAN Listener LISTENER_SCAN2 exists. Port: TCP:1521
SCAN Listener LISTENER_SCAN3 exists. Port: TCP:1521
Here I was getting TNS:no Listener errors from the client connections.
I have modifyed the scan port then it is working fine.
grdoratst104:/apps/grid/grdhome:+ASM4> srvctl modify scan_listener -p TCP:1800
grdoratst104:/apps/grid/grdhome:+ASM4> srvctl config scan_listener
SCAN Listener LISTENER_SCAN1 exists. Port: TCP:1800
SCAN Listener LISTENER_SCAN2 exists. Port: TCP:1800
SCAN Listener LISTENER_SCAN3 exists. Port: TCP:1800
grdoratst104:/apps/grid/grdhome:+ASM4>
Here the problem is we need to do the grid infra upgrade with out downtime,but due this default port issue clients are not able to connect to the database.
Thanks
Bala
Edited by: user12032334 on May 31, 2011 11:46 AM

Why are you using a non default port? It does not improve security. It makes network management more complex. And causes the type of issues that you are facing now.
So before changing defaults, make sure that your reasons are technically sound. And using port 1900 when 1521 is available, is not technically sound by any means.
As for addressing the problem you have created for yourself by mucking around with port numbers. Use a NAT firewall (on each RAC node) to rewrite packets headers received on port 1900 and send these to the server's port 1521 instead (on the VIP or static IP as required).
This can be fairly easily done using iptables if your o/s is Linux. You need to:
a) create a pre-routing NAT rule
b) create a post-routing NAT rule
c) create a forwarding filter rule for port 1900/tcp
d) create an input filter rule to accept traffic on 1900/tcp

Default port for J2SE Adapter Engine?

Hello all,
what is the default port for J2SE Adapter Engine? How do I restart this adapter engine?
Regards,
N.S

Swamy,
8200 is the default port. Also go through this help of how to start and stop the J2SE Adapter Engine:
http://help.sap.com/saphelp_nw04/helpdata/en/12/5dd23aaad7b3408dde3c1577fda5b3/frameset.htm
---Satish

IdM doesn't support non-default port on mysql 4.1 as repository??

Hi
IdM doesn't support non-default port on mysql 4.1 as repository??
IdM version is 6.0.
I setup mysql 4.1 using non-default port 3307.
(default port is 3306)
During setup wizard,
the URL [jdbc:mysql://localhost:3307/waveset] doesn't work.
I am getting following error.
com.waveset.util.InternalError:
==> com.waveset.util.ConfigurationError:
==> com.mysql.jdbc.CommunicationsException: Communications link failure due to underlying exception:
Of cource,
the URL [jdbc:mysql://localhost/waveset] works well
when I setup mysql using default port.

Hi,
it does work with non standard ports but whatever port you specify it will always try to connect to the default port before actually changing the repo setting.
Therefore use the switches -n -o $WSHOME/WEB-INF/ServerRepository.xml to write the new configuration without performing the broken checks.
Regards,
Patrick

What is the default port on visual administrator with 2004s

Hi
I just finished the install of Netweaver 2004s and oracle is up and running and the j2ee engine as well.
I want to lauch the visual administrator but unable to connect
its saying cannont connect to ip and port....
What is the default port for the first time login
Also,
went threw my web browser was able to access the portal page of the Netweaver... I tried the sap* user name but doesn't work
JF

Hi Jean
The default port for VA is 5XX04 (where XX is the instance number)
the user for the portal is Administrator (not sap*) and the password is the one you used on the installation.
Hope this help
Juan
Please reward with points if helpful

Make the dvi connector on the 4870 the default port

Hi,
I have a 8 core 2.8 and a new 4870 card, 23" cinema dvi, generic 19" with the dvi to mini display port adapter.
I want to make the DVI port the default port on my mac.
I know how to change the arrangement and menu bar. Back in the old days there was a way to change the default port, So that as the machine starts up the dvi out shows the startup sequence and all of the warning boxes show up on that display.
Thanks
mdr

You can still get it sent in for repair through Apple, but since the warranty doesn't cover any kind of damage, it would be fee based.
All pricing can be found at http://docs.info.apple.com/article.html?artnum=304869. For an iPod video, depending on the model, repair will range between $129-$179.
I tried taking a search on Google, but there isn't too much for non-Apple repairs for dock connectors. Your best bet would be to take a look at the Apple Store online, and take a look at the refurbished models of the iPod Videos.

FWSM Default port channel?

I'm doing some L2 cleanups across mutliple 6509E environments and I've found something consistent that I can't find in documentation.
On all my pairs of 6509s where I have FWSMs bundled (6509-A has FWSM-1 is Slot 1 and 6509-B has FWSM-2 in Slot 1) I also have a port channel 305. Obviously when I do a "show run" or "show int desc" I don't see anything in slot one. It's a service module. But the port channel is referencing ports 1/1-6. And it's all in service/up. I was about to delete this as I thought it was some leftover config (TEST 6509s) until I went and saw the same things on our PROD 6509s. Can anyone explain this or provide some documentation on it? Is it cosmetic? Necessary? Can I delete it as part of my audit cleanup? Don't want to mess with it even in TEST without some information. Nothing on google that's clear and I can't find anything on CCO.
6509-1#sho etherch 305 summ
Flags: D - down        P - bundled in port-channel
        I - stand-alone s - suspended
        H - Hot-standby (LACP only)
        R - Layer3      S - Layer2
        U - in use      N - not in use, no aggregation
        f - failed to allocate aggregator
        M - not in use, no aggregation due to minimum links not met
        m - not in use, port not aggregated due to minimum links not met
        u - unsuitable for bundling
        d - default port
        w - waiting to be aggregated
Number of channel-groups in use: 11
Number of aggregators:           11
Group Port-channel Protocol    Ports
------+-------------+-----------+-----------------------------------------------
305    Po305(SU)        -        Gi1/1(P)       Gi1/2(P)       Gi1/3(P)
                                 Gi1/4(P)       Gi1/5(P)       Gi1/6(P)
Last applied Hash Distribution Algorithm:   -
6509-1#sho etherch 305 det
Group state = L2
Ports: 6   Maxports = 8
Port-channels: 1 Max Port-channels = 1
Protocol:    -
Minimum Links: 0
                Ports in the group:
Port: Gi1/1
Port state    = Up Mstr In-Bndl
Channel group = 305         Mode = On      Gcchange = -
Port-channel = Po305       GC   =   -         Pseudo port-channel = Po305
Port index    = 0           Load = 0x41        Protocol =    -
Age of the port in the current state: 46d:06h:53m:39s
Port: Gi1/2
Port state    = Up Mstr In-Bndl
Channel group = 305         Mode = On      Gcchange = -
Port-channel = Po305       GC   =   -         Pseudo port-channel = Po305
Port index    = 1           Load = 0x02        Protocol =    -
Age of the port in the current state: 46d:06h:53m:39s
Port: Gi1/3
Port state    = Up Mstr In-Bndl
Channel group = 305         Mode = On      Gcchange = -
Port-channel = Po305       GC   =   -         Pseudo port-channel = Po305
Port index    = 2           Load = 0x04        Protocol =    -
Age of the port in the current state: 46d:06h:53m:41s
Port: Gi1/4
Port state    = Up Mstr In-Bndl
Channel group = 305         Mode = On      Gcchange = -
Port-channel = Po305       GC   =   -         Pseudo port-channel = Po305
Port index    = 3           Load = 0x88        Protocol =    -
Age of the port in the current state: 46d:06h:53m:41s
Port: Gi1/5
Port state    = Up Mstr In-Bndl
Channel group = 305         Mode = On      Gcchange = -
Port-channel = Po305       GC   =   -         Pseudo port-channel = Po305
Port index    = 4           Load = 0x10        Protocol =    -
Age of the port in the current state: 46d:06h:53m:41s
Port: Gi1/6
Port state    = Up Mstr In-Bndl
Channel group = 305         Mode = On      Gcchange = -
Port-channel = Po305       GC   =   -         Pseudo port-channel = Po305
Port index    = 5           Load = 0x20        Protocol =    -
Age of the port in the current state: 46d:06h:53m:41s
                Port-channels in the group:
Port-channel: Po305
Age of the Port-channel   = 46d:06h:55m:56s
Logical slot/port   = 14/11          Number of ports = 6
GC                  = 0x00000000      HotStandBy port = null
Port state          = Port-channel Ag-Inuse
Protocol            =    -
Fast-switchover     = disabled
Load share deferral = disabled
Ports in the Port-channel:
Index   Load   Port     EC state        No of bits
------+------+------+------------------+-----------
0     41     Gi1/1    On    2
1     02     Gi1/2    On    1
2     04     Gi1/3    On    1
3     88     Gi1/4    On    2
4     10     Gi1/5    On    1
5     20     Gi1/6    On    1
Time since last port bundled:    46d:06h:53m:41s    Gi1/6
Last applied Hash Distribution Algorithm:   -
NOC-SW-ITEST-AGG1#

The connection between the FWSM and the switch is a 6-GB 802.1Q trunking EtherChannel. This EtherChannel is automatically created when you install the FWSM.
http://cisconetwork.org.ua/1587051893/ch04lev1sec1.html
http://www.cisco.com/en/US/docs/security/fwsm/fwsm23/configuration/guide/switch.pdf
Thanks
Ajay

Web Enterprise Manager Default Port Number in Oracle 9i

Enabeling Auditing on database 9.2.0.8
Web Enterprise Manager Default Port Number in Oracle 9i:
Does anyone know the default port number of the web enterprise manager (Oracle 9i)?
If I installed or configured enterprise manager and I forgot the port, where can I find it?

You must read the part in the Installation Documentation for certified repository databases to ensure that your database is OK.
My advice is always, never start any installation (not only Oracle) without reading the Documentation, Release Note and any README.
You will spend less time in the installation as Configuration if you use the required documentations for your platform.
http://www.oracle.com/pls/db102/portal.portal_db?selected=21

Default port of Oracle 9i Database --- Oracle database installation

Hi,
I am new to oracle..searched across internet to know this particular detail of Oracle 9i database installation.
My query being..Can Oracle database be installed in a way to use port's other than 1521. When do we go for making use of a port other than 1521. What are the risk's and benifit's.
How to make use of a port other than 1521 while making use of OUI(oracle universal installer) to install a 9i database on windows OS.
Can someone provide an answer to my queries/ some link where I can find the answer.
Thanks,
R S

you have to change the port no in listener.ora file which exists on Oracle_home/network/admin/listener.ora like
LISTENER =
(DESCRIPTION_LIST =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = TCP)(HOST = Griat-xp.bebo.tech.com)(PORT = 1521))
)from this to
LISTENER =
(DESCRIPTION_LIST =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = TCP)(HOST = Griat-xp.bebo.tech.com)(PORT = 1522))
)afterwords you have to reload the listener by using lsnrctl on command prompt
in this way you can change the default port of Oracle
Regards
Singh

What is the oc4j's default port?

What is the oc4j's default port? I want to type the address in browser's address bar and see the default page of oc4j (ex.: http://localhost:8080)
Thanks
sávio

hi,
in the local machine it is 8889
and the default in the aPP SERVER IS 7778
you can change them but i dont know how,for the app server its easy,but I had never try to change it in the local.
good luck

VPN PPTP Default Port

Similar Messages

Maybe you are looking for