VPN(PPTP) fails since QuickTime 7.4.1 & iPhoto 7.1.2 update
Since updating QuickTime and iPhoto:
drwxrwxr-x 3 root admin 102 Feb 7 12:48 QuickTime741_Leopard.pkg
drwxrwxr-x 3 root admin 102 Feb 7 12:50 iPhoto_712.pkg
my before then working PPTP connection to a remote server has stopped working. Log info does not tell me why. On the server side all I get is
LCP: timeout sending Config-Requests
Before Feb 7, the log at the client would show
Thu Feb 7 12:56:07 2008 : PPTP connecting to server 'MYSERVER' (x.x.x.x)...Thu Feb 7 12:56:09 2008 : PPTP connection established.
Thu Feb 7 12:56:09 2008 : using link 0
Thu Feb 7 12:56:09 2008 : Using interface ppp0
Thu Feb 7 12:56:09 2008 : Connect: ppp0 <--> socket[34:17]
Thu Feb 7 12:56:09 2008 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x2ee9cbc1> <pcomp> <accomp>]
Thu Feb 7 12:56:10 2008 : rcvd [LCP ConfAck id=0x1 <asyncmap 0x0> <magic 0x2ee9cbc1> <pcomp> <accomp>]
Thu Feb 7 12:56:12 2008 : rcvd [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x31571fa6> <pcomp> <accomp>]
Thu Feb 7 12:56:12 2008 : lcp_reqci: returning CONFACK.
Thu Feb 7 12:56:12 2008 : sent [LCP ConfAck id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x31571fa6> <pcomp> <accomp>]
Thu Feb 7 12:56:12 2008 : sent [LCP EchoReq id=0x0 magic=0x2ee9cbc1]
Thu Feb 7 12:56:12 2008 : rcvd [LCP EchoReq id=0x0 magic=0x31571fa6]
Thu Feb 7 12:56:12 2008 : sent [LCP EchoRep id=0x0 magic=0x2ee9cbc1]
Thu Feb 7 12:56:12 2008 : rcvd [CHAP Challenge id=0x46 <4e941665f9a81222fba2d3b3ce20c704>, name = "MYSERVER"]
Thu Feb 7 12:56:12 2008 : sent [CHAP Response id=0x46 <1590d07ccb2be17f902b5516ad0ad46b000000000000000022ea6af8559e5642c9023c61302bb6 40267ede89beba38f600>, name = "myuser"]
Thu Feb 7 12:56:12 2008 : rcvd [LCP EchoRep id=0x0 magic=0x31571fa6]
Thu Feb 7 12:56:12 2008 : rcvd [CHAP Success id=0x46 "S=243B3B37AD6161C9D22715B884C1410611B3A6D3 M=Access granted"]
But now:
Mon Feb 11 16:48:04 2008 : PPTP connecting to server 'MYSERVER' (x.x.x.x)...
Mon Feb 11 16:48:09 2008 : PPTP connection established.
Mon Feb 11 16:48:10 2008 : Using interface ppp0
Mon Feb 11 16:48:10 2008 : Connect: ppp0 <--> socket[34:17]
Mon Feb 11 16:48:40 2008 : LCP: timeout sending Config-Requests
Mon Feb 11 16:48:40 2008 : Connection terminated.
Mon Feb 11 16:48:40 2008 : PPTP disconnecting...
Mon Feb 11 16:48:40 2008 : PPTP disconnected
So, now I am in a fix. The server is at 150km distance and is headless. Without VPN, I cannot share its screen nor do anything with WorkGroup manager. I can log in with ssh and I can run Server Admin at a distance.
Any tips what I can do (from the command line) to fix this? For instance, can I do a repair permissions from the command line?
Installing 10.5.2 on both sides made it work twice. I had a working VPN again after upgrading both sides. But a second time around it failed. I rebooted both sides and it worked again, once.
Now, whatever I do, I fail to get authenticated again so i am back to square one.
I wonder if this could help me out:
http://discussions.apple.com/thread.jspa?messageID=5908297�
I am restricted to command line operations.
Similar Messages
-
VPN (PPTP) Authentication Failed
Hi,
I am trying to Connect to my work network. Work uses a Secure Computing SG560.
The setup at work on the SG560 is as follows:
PPTP VPN Server
Authentication Scheme: Weakly Encrypted Authentication (CHAP)
Encryption: Strong Encryption (MPPE 128 Bit)
On my mac, I have setup a new VPN (PPTP) Connection
Given it the Internet Address
My Account Name
Encryption Auto (And tried Maximum)
Authentication Settings is password with my password set on the SG560.
Pressing Connection I get a prompt saying Authentication failed
In my console I have this (obviously some settings omitted)
6/12/10 06/12/10 - 9:06:48 PM pppd[1825] pppd 2.4.2 (Apple version 412.3) started by wt9bind, uid 501
6/12/10 06/12/10 - 9:06:48 PM pppd[1825] PPTP connecting to server 'x.x.x.x' (x.x.x.x)...
6/12/10 06/12/10 - 9:06:48 PM pppd[1825] PPTP connection established.
6/12/10 06/12/10 - 9:06:48 PM pppd[1825] Connect: ppp0 <--> socket[34:17]
6/12/10 06/12/10 - 9:06:48 PM pppd[1825] MS-CHAP authentication failed:
6/12/10 06/12/10 - 9:06:48 PM pppd[1825] Connection terminated.
6/12/10 06/12/10 - 9:06:48 PM pppd[1825] PPTP disconnecting...
6/12/10 06/12/10 - 9:06:48 PM pppd[1825] PPTP disconnected
The only way to get this working is to change the Authentication Scheme in the SG560 to No Auth
If I do this, it connects perfectly with the following:
6/12/10 06/12/10 - 9:09:15 PM kernel utunctlconnect: creating interface utun0
6/12/10 06/12/10 - 9:09:16 PM pppd[1839] pppd 2.4.2 (Apple version 412.3) started by wt9bind, uid 501
6/12/10 06/12/10 - 9:09:16 PM pppd[1839] PPTP connecting to server 'x.x.x.x' (x.x.x.x)...
6/12/10 06/12/10 - 9:09:16 PM pppd[1839] PPTP connection established.
6/12/10 06/12/10 - 9:09:16 PM pppd[1839] Connect: ppp0 <--> socket[34:17]
6/12/10 06/12/10 - 9:09:17 PM pppd[1839] local IP address x.x.x.x
6/12/10 06/12/10 - 9:09:17 PM pppd[1839] remote IP address x.x.x.x
6/12/10 06/12/10 - 9:09:17 PM pppd[1839] primary DNS address x.x.x.x
6/12/10 06/12/10 - 9:09:17 PM pppd[1839] secondary DNS address x.x.x.x
6/12/10 06/12/10 - 9:09:17 PM configd[14] network configuration changed.
6/12/10 06/12/10 - 9:09:17 PM pppd[1839] pptpwaitinput: Address added. previous interface setting (name: en0, address: 192.168.1.9), current interface setting (name: ppp0, family: PPP, address: x.x.x.x, subnet: 255.255.0.0, destination: x.x.x.x).
6/12/10 06/12/10 - 9:09:17 PM configd[14] network configuration changed.
6/12/10 06/12/10 - 9:09:17 PM vmnet-bridge[234] Dynamic store changed
6/12/10 06/12/10 - 9:09:17 PM vmnet-bridge[234] Could not retrieve media for interface ppp0: Operation not supported on socket.
6/12/10 06/12/10 - 9:09:17 PM kernel vmnet: VMNetDisconnect called for port 0xf8f9f00
6/12/10 06/12/10 - 9:09:17 PM kernel vmnet: Invalidating peer info for hub: 0, port: 0
6/12/10 06/12/10 - 9:09:17 PM kernel vmnet: bridge-en0: filter detached
6/12/10 06/12/10 - 9:09:17 PM kernel vmnet: bridge-en0: down
6/12/10 06/12/10 - 9:09:17 PM kernel vmnet: bridge-en0: detached
6/12/10 06/12/10 - 9:09:17 PM kernel vmnet: Freeing hub at 0xe45a000.
Now obviously running no auth is totally unacceptable.
The options in the SG560 for Authentication Scheme is:
PAP
CHAP
MS-CHAP
MS-CHAPV2
Required Encryption:
No Encryption
Basic Encryption MPPE 40Bit
Strong Encryption MPPE 128Bit
Can somebody tell me why my client on my mac will not connect as soon as the encryption level is changed on the SG560? It works perfectly from Windows.
ThanksCan anybody help me on this?
-
PPTP troubles since Snow Leopard..
I'm connection trough a PPTP connection to my office network. In Leopard it just worked fine. After installing Snow Leopard it's not working anymore. It's driving me crazy..
Tried different connections and different laptops, all are working fine, except for my Macbook with Snow Leopard.
All i see in my logfile is:
Mon Aug 31 10:41:51 2009 : PPTP connecting to server '{hostname}' ({ipaddress})...
Mon Aug 31 10:41:52 2009 : PPTP connection established.
Mon Aug 31 10:41:52 2009 : Using interface ppp0 Mon Aug 31 10:41:52 2009 : Connect: ppp0 <--> socket[34:17] Mon Aug 31 10:42:22 2009 : LCP: timeout sending Config-Requests Mon Aug 31 10:42:22 2009 : Connection terminated.
Mon Aug 31 10:42:22 2009 : PPTP disconnecting...
Mon Aug 31 10:42:22 2009 : PPTP disconnected
I don't understand why this is happening, are there any other persons with this problem? Or maybe the solutionHello, all...
I thought I'd share our experiences, in the hopes that they might save someone else the time and effort of repeating troubleshooting steps we've already done.
We're having similar PPTP VPN issues since we upgraded three of our machines to Snow Leopard. (Actually, by upgrade, I should say that we "nuked and paved" all three machines and did a completely clean install of 10.6)
We are trying to connect to a pfSense firewall's PPTP VPN. When using OS X 10.5.8, all three machines connected to this VPN without problems, no matter where we were connecting from. Once we moved these three machines to Snow Leopard, things went haywire.
Because of how our campus network is configured, we need to connect to the VPN from a variety of locations, including from the same subnet as the firewall's Red (WAN) interface. Here's what happens: If we're on the same subnet as the firewall's Red (WAN) interface, connections to the VPN either fail before Mac OS X gets to the "Authenticating" portion, or they authenticate, connect for a few seconds and then disconnect. Once that machine disconnects or fails the first time, you cannot connect to the firewall's IP address with ANY type of traffic, (VPN, HTTP, ping) from the "failed" machine. (other machines still seem able to connect) The only way you can get new connections to be accepted from the "failed" machine is to reboot the pfSense box. Then, it's the same issue all over again...
If we're outside the subnet of the red (WAN) interface, then it appears we can connect to the VPN successfully. I remained connected for three hours this weekend, on my MacBook Pro running 10.6.1, without a hiccup.
Before narrowing it down to occurring only on our Snow Leopard machines, we installed pfSense onto a completely different server just to eliminate that as a variable. No dice...same issue.
If anyone finds a solution to this problem, we're all ears! -
Hi,
I have a setup ISE 1.1.1. Users are getting authenticate against AD. Everything is working fine except some users report disconnection. I see in the ISE that (Authentication failed: 24415 User authentication against Active Directory failed since user's account is locked out). Users are using Windows 7 OS.
Error is enclosed & here is the port configuration.
Port Configuration.
interface GigabitEthernet0/2
switchport access vlan 120
switchport mode access
switchport voice vlan 121
authentication event fail action next-method
authentication event server dead action reinitialize vlan 120
authentication event server alive action reinitialize
authentication host-mode multi-auth
authentication order mab dot1x
authentication priority dot1x mab
authentication port-control auto
authentication periodic
authentication timer reauthenticate server
mab
dot1x pae authenticator
dot1x timeout tx-period 60
spanning-tree portfast
ip dhcp snooping limit rate 30 interface GigabitEthernet0/2
switchport access vlan 120
switchport mode access
switchport voice vlan 121
authentication event fail action next-method
authentication event server dead action reinitialize vlan 120
authentication event server alive action reinitialize
authentication host-mode multi-auth
authentication order mab dot1x
authentication priority dot1x mab
authentication port-control auto
authentication periodic
authentication timer reauthenticate server
mab
dot1x pae authenticator
dot1x timeout tx-period 60
spanning-tree portfast
ip dhcp snooping limit rate 30
Please help.The error message means that Active Directory server Reject the authentication attempt
as for some reasons the user account got locked.I guess, You should ask your AD Team to check in the AD
Event Logs why did the user account got locked.
Under Even Viewers, You can find it out
Regards
Minakshi (Do rate the helpful posts) -
Hi,
Since we implemented Cisco ISE we receive the following failure on several Notebooks:
Authentication failed : 24408 User authentication against Active Directory failed since user has entered the wrong password
This happens 2 or 3 times per Day. So basically the authentications are working. But when the failure appears, the connection is lost for a short time.
The Clients are using PEAP(EAP-MSCHAPv2) for Authentication. We've got a Cisco Wireless Environment (WLC 5508).
Why is this happening?
Thanks,
MarcThe possible causes of this error message are:
1.] If the end user entered an incorrect username.
2.] The shared sceret between WLC and ISE is mismatched. With this we'll see continous failed authentication.
3.] As long as a PSN not receiving a response from the supplicant within this limit during an EAP conversation, it will throw this error code. In majority of cases it says eap session timed out.
In your cases, the 3rd option seems to be the most closest one.
Jatin Katyal
- Do rate helpful posts - -
i am sitting in lan
getting nat through firewall and try to connect vpn client but it is showing error 442 vpn adapter failed ,a cisco vpn adapter is showing in pc.
thanksHi,
Can you uninstall/reinstall the Cisco IPsec VPN client software on this machine?
Federico. -
Configuration Deployment Failed(Since instance has been modified on node)
Hi
I am new to sun java system portal server 7.1 update 2, whenever i am going to deployed war,its showing given errors..(sun java system portal server with webserver)
[10/Jul/2008:11:28:29] info ( 770): for host 172.20.46.42 trying to POST /jmxco
nnector/remotejmx, service-j2ee reports: Exception : ADMIN3658: Configuration de
ployment failed since the instance has been modified on node(s): netapp.india.tc
s.com. These modifications can either be discarded using the --force option or p
ulled into the current configuration using the pull-config command.
can you any one please give the solutions..
regards
Sekar MThe webserver on netapp.india.tcs.com has gone to deployment pending state. This means some configuration files were touched manually.
You may have to login to the webserver admin console and bring it back to the normal state. Check the webserver admin guide
You can also check :
http://onesearch.sun.com/search/docs/index.jsp?col=docs_en&locale=en&qt=deployment+pending -
Tiger VPN (PPTP) connection issues
Hello everyone.
I'm having major issues trying to connect to office VPN from home; hoping someone can point me in the right direction. (And my profound apologies in advance for the long post -- just trying make sure to include enough detail to debug whatever might be happening)
At the office we have a 3Com OfficeConnect VPN Firewall sitting in front of a Microsoft 2003 Exchange server. (3Com product page for this VPN box is http://www.3com.com/products/en_US/detail.jsp?tab=features&sku=3CR870-95&pathtyp e=purchase). Home connection is a Linksys WRT54GL wireless router in front of a broadband cable modem. PPTP pass-through is enabled in the router config.
At home I have a WinXP-SP2 laptop and my G4 Powerbook (OS 10.4.7) sitting side-by-side. From the XP laptop, I can get into the VPN using XP's built-in client without any problems. The DNS lookup and authentication steps take about 2-3 seconds combined. Once the connection is established, both external sites (cnn.com) and internal sites (intranet.companyname.local) load in a browser window without any appreciable delay. I can also access Windows shared drives on the internal network without problems, including large (10's of MB or more) file copies to/from the XP laptop's HD.
On the Powerbook, using Tiger's built-in VPN client, I can connect OK (though the authentication step takes a bit longer, about 4-5 seconds), but after that, almost nothing works. I can ping the internal DNS server, but after a few pings with reasonable delays (~15 millisecond range), the round-trip times suddenly jump to handfuls of seconds. In the browser, trying to load an internal webpage (http://intranet.companyname.local) times out before anything shows up on screen. In Finder, using Go>Connect to Server... very slowly establishes the connection (~10-15 seconds or longer), and sometimes opens a Finder window... but then invariably times out. I have never once had the connection remain stable enough to transfer so much as a single file from the shared volume onto the Powerbook's Desktop before it times out and disconnects.
On the XP machine, relevant(?) VPN config settings are:
require secured password
require data encryption (disconnect if none)
PPTP VPN
LCP extensions enabled
software compression enabled
multi-link negotiation for single link connections DISABLED
server type = PPP
transports = TCP/IP
authentication = MS CHAP
encryption = MPPE 128
compression = none
PPP multilink framing = off
and, once the VPN connection is established, parameters are (from "ipcofig /all"):
Windows IP Configuration
Host Name . . . . . . . . . . . . : (companyname)-hj2
Primary Dns Suffix . . . . . . . : (companyname).local
Node Type . . . . . . . . . . . . : Unknown
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : (companyname).local
Ethernet adapter Wireless Network Connection:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Intel(R) PRO/Wireless 2915ABG Network Connection
Physical Address. . . . . . . . . : XX-XX-XX-XX-XX-XX
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : 192.168.1.104
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.1.1
DHCP Server . . . . . . . . . . . : 192.168.1.1
DNS Servers . . . . . . . . . . . : 192.168.1.1
PPP adapter (ConnectionName):
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : WAN (PPP/SLIP) Interface
Physical Address. . . . . . . . . : XX-XX-XX-XX-XX-XX
Dhcp Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 172.16.0.70
Subnet Mask . . . . . . . . . . . : 255.255.255.255
Default Gateway . . . . . . . . . : 172.16.0.70
DNS Servers . . . . . . . . . . . : 172.16.0.11
finally, results of "ping -n 10 (InternalServer)":
Pinging (InternalServer).(companyname).local [172.16.0.5] with 32 bytes of data:
Reply from 172.16.0.5: bytes=32 time=4ms TTL=128
Reply from 172.16.0.5: bytes=32 time=10ms TTL=128
Reply from 172.16.0.5: bytes=32 time=10ms TTL=128
Ping statistics for 172.16.0.5:
Packets: Sent = 10, Received = 10, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 4ms, Maximum = 10ms, Average = 9ms
On the Powerbook, I have a VPN (PPTP) connection set up with "Send all traffic over VPN connection" unchecked. In the Network panel of System Preferences, I have tried manually adding (and removing) "local, (companyname).local" in the Search Domains line, and manually adding (and removing) the IPs of our internal DNS servers (172.16.0.5, 172.16.0.11) under the TCP/IP tab. Proxies are turned off in all cases.
With those settings, the relevant(?) parts of running "ifconfig" from a Terminal window after starting the VPN are as follows:
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
inet 127.0.0.1 netmask 0xff000000
en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet6 fe80::XXX:XXXX:XXXX:XXXX%en1 prefixlen 64 scopeid 0x5
inet 192.168.1.100 netmask 0xffffff00 broadcast 192.168.1.255
ether XX:XX:XX:XX:XX:XX
media: autoselect status: active
supported media: autoselect
fw0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 4078
lladdr XX:XX:XX:XX:XX:XX:XX:XX
media: autoselect <full-duplex> status: inactive
supported media: autoselect <full-duplex>
ppp0: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1444
inet 172.16.0.69 --> 172.16.0.11 netmask 0xffff0000
The associated connection log from Internet Connect is:
Tue Jul 18 08:50:57 2006 : PPTP connecting to server 'vpn.(companyname).com' (XXX.XXX.XXX.XXX)...
Tue Jul 18 08:50:57 2006 : PPTP connection established.
Tue Jul 18 08:50:58 2006 : using link 0
Tue Jul 18 08:50:58 2006 : Using interface ppp0
Tue Jul 18 08:50:58 2006 : Connect: ppp0 <--> socket[34:17]
Tue Jul 18 08:50:58 2006 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xb851f701> <pcomp> <accomp>]
Tue Jul 18 08:50:58 2006 : rcvd [LCP ConfReq id=0x1 <mru 1492> <auth chap MS> <magic 0x80697000>]
Tue Jul 18 08:50:58 2006 : lcp_reqci: returning CONFACK.
Tue Jul 18 08:50:58 2006 : sent [LCP ConfAck id=0x1 <mru 1492> <auth chap MS> <magic 0x80697000>]
Tue Jul 18 08:50:58 2006 : rcvd [LCP ConfRej id=0x1 <asyncmap 0x0> <pcomp> <accomp>]
Tue Jul 18 08:50:58 2006 : sent [LCP ConfReq id=0x2 <magic 0xb851f701>]
Tue Jul 18 08:50:58 2006 : rcvd [LCP ConfAck id=0x2 <magic 0xb851f701>]
Tue Jul 18 08:50:58 2006 : sent [LCP EchoReq id=0x0 magic=0xb851f701]
Tue Jul 18 08:50:58 2006 : rcvd [CHAP Challenge id=0x1 <4f0656add65818c2>, name = "Guest"]
Tue Jul 18 08:50:58 2006 : sent [CHAP Response id=0x1 <0000000000000000000000000000000000000000000000004c86e5ccf08b95431034ef14706021 d358dc21b96a59157301>, name = "(UserName)"]
Tue Jul 18 08:50:58 2006 : rcvd [LCP EchoRep id=0x0 magic=0x80697000]
Tue Jul 18 08:50:58 2006 : rcvd [CHAP Success id=0x1 "Authentication succeeded, welcome!"]
Tue Jul 18 08:50:58 2006 : CHAP authentication succeeded: Authentication succeeded, welcome!
Tue Jul 18 08:50:58 2006 : Disabling 40-bit MPPE; MS-CHAP LM not supported
Tue Jul 18 08:50:58 2006 : sent [CCP ConfReq id=0x1 <mppe +H -M +S -L -D -C>]
Tue Jul 18 08:50:58 2006 : rcvd [IPCP ConfReq id=0x1 <addr 172.16.0.11> <ms-dns3 0.0.0.0> <ms-wins 0.0.0.0>]
Tue Jul 18 08:50:58 2006 : sent [IPCP TermAck id=0x1]
Tue Jul 18 08:50:58 2006 : rcvd [CCP ConfReq id=0x1 <mppe +H +M +S +L -D -C>]
Tue Jul 18 08:50:58 2006 : sent [CCP ConfNak id=0x1 <mppe +H -M +S -L -D -C>]
Tue Jul 18 08:50:58 2006 : rcvd [CCP ConfAck id=0x1 <mppe +H -M +S -L -D -C>]
Tue Jul 18 08:50:58 2006 : rcvd [CCP ConfReq id=0x2 <mppe +H -M +S -L -D -C>]
Tue Jul 18 08:50:58 2006 : sent [CCP ConfAck id=0x2 <mppe +H -M +S -L -D -C>]
Tue Jul 18 08:50:58 2006 : MPPE 128-bit stateless compression enabled
Tue Jul 18 08:50:58 2006 : sent [IPCP ConfReq id=0x1 <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>]
Tue Jul 18 08:50:58 2006 : sent [IPV6CP ConfReq id=0x1 <addr fe80::020a:95ff:fea5:564c>]
Tue Jul 18 08:50:58 2006 : sent [ACSCP] 01 01 00 10 01 06 00 00 00 01 02 06 00 00 00 01
Tue Jul 18 08:50:58 2006 : rcvd [LCP ProtRej id=0x1 80 57 01 01 00 0e 01 0a 02 0a 95 ff fe a5 56 4c]
Tue Jul 18 08:50:58 2006 : rcvd [LCP ProtRej id=0x2 82 35 01 01 00 10 01 06 00 00 00 01 02 06 00 00 00 01]
Tue Jul 18 08:50:58 2006 : rcvd [IPCP ConfRej id=0x1 <ms-dns3 0.0.0.0>]
Tue Jul 18 08:50:58 2006 : sent [IPCP ConfReq id=0x2 <addr 0.0.0.0> <ms-dns1 0.0.0.0>]
Tue Jul 18 08:50:58 2006 : rcvd [IPCP ConfNak id=0x2 <addr 172.16.0.69> <ms-dns1 172.16.0.11>]
Tue Jul 18 08:50:58 2006 : sent [IPCP ConfReq id=0x3 <addr 172.16.0.69> <ms-dns1 172.16.0.11>]
Tue Jul 18 08:50:58 2006 : rcvd [IPCP ConfAck id=0x3 <addr 172.16.0.69> <ms-dns1 172.16.0.11>]
Tue Jul 18 08:51:01 2006 : sent [IPCP ConfReq id=0x3 <addr 172.16.0.69> <ms-dns1 172.16.0.11>]
Tue Jul 18 08:51:01 2006 : rcvd [IPCP ConfAck id=0x3 <addr 172.16.0.69> <ms-dns1 172.16.0.11>]
Tue Jul 18 08:51:04 2006 : sent [IPCP ConfReq id=0x3 <addr 172.16.0.69> <ms-dns1 172.16.0.11>]
Tue Jul 18 08:51:04 2006 : rcvd [IPCP ConfAck id=0x3 <addr 172.16.0.69> <ms-dns1 172.16.0.11>]
Tue Jul 18 08:51:07 2006 : sent [IPCP ConfReq id=0x3 <addr 172.16.0.69> <ms-dns1 172.16.0.11>]
Tue Jul 18 08:51:07 2006 : rcvd [IPCP ConfAck id=0x3 <addr 172.16.0.69> <ms-dns1 172.16.0.11>]
Tue Jul 18 08:51:08 2006 : rcvd [IPCP ConfReq id=0x1 <addr 172.16.0.11> <ms-dns3 0.0.0.0> <ms-wins 0.0.0.0>]
Tue Jul 18 08:51:08 2006 : ipcp: returning Configure-REJ
Tue Jul 18 08:51:08 2006 : sent [IPCP ConfRej id=0x1 <ms-dns3 0.0.0.0> <ms-wins 0.0.0.0>]
Tue Jul 18 08:51:08 2006 : rcvd [IPCP ConfReq id=0x2 <addr 172.16.0.11>]
Tue Jul 18 08:51:08 2006 : ipcp: returning Configure-ACK
Tue Jul 18 08:51:08 2006 : sent [IPCP ConfAck id=0x2 <addr 172.16.0.11>]
Tue Jul 18 08:51:08 2006 : ipcp: up
Tue Jul 18 08:51:08 2006 : local IP address 172.16.0.69
Tue Jul 18 08:51:08 2006 : remote IP address 172.16.0.11
Tue Jul 18 08:51:08 2006 : primary DNS address 172.16.0.11
The problem is that despite this apparently successful negotiation, the VPN connection doesn't really work. If I type "intranet" into the browser URL bar, it doesn't pick it up as "intranet.companyname.local" and instead treats this as a search query, which it passes to google... which times out. If I type "intranet.companyname.local" into the URL bar instead, it appears to do the DNS lookup correctly... but then times out again.
Ping times look like this at first:
PING (InternalServer).(companyname).local (172.16.0.5): 56 data bytes
64 bytes from 172.16.0.5: icmp_seq=0 ttl=128 time=16.605 ms
64 bytes from 172.16.0.5: icmp_seq=1 ttl=128 time=15.920 ms
64 bytes from 172.16.0.5: icmp_seq=2 ttl=128 time=16.154 ms
^C
--- (InternalServer).(companyname).local ping statistics ---
3 packets transmitted, 3 packets received, 0% packet loss
round-trip min/avg/max/stddev = 15.920/16.226/16.605/0.284 ms
... but then if I try it again two seconds later:
PING (InternalServer).(companyname).local (172.16.0.5): 56 data bytes
64 bytes from 172.16.0.5: icmp_seq=0 ttl=128 time=727.144 ms
64 bytes from 172.16.0.5: icmp_seq=1 ttl=128 time=1727.030 ms
64 bytes from 172.16.0.5: icmp_seq=2 ttl=128 time=2727.260 ms
64 bytes from 172.16.0.5: icmp_seq=3 ttl=128 time=3726.747 ms
64 bytes from 172.16.0.5: icmp_seq=4 ttl=128 time=5723.986 ms
64 bytes from 172.16.0.5: icmp_seq=5 ttl=128 time=5719.810 ms
64 bytes from 172.16.0.5: icmp_seq=6 ttl=128 time=6720.334 ms
64 bytes from 172.16.0.5: icmp_seq=7 ttl=128 time=6719.848 ms
^C
--- (InternalServer).(companyname).local ping statistics ---
15 packets transmitted, 8 packets received, 46% packet loss
round-trip min/avg/max/stddev = 727.144/4224.020/6720.334/2176.543 ms
OK, enough for now. Can anyone spot what I might be doing wrong, and/or suggest something to try to remedy this? If there is any additional logging/debug info that would be useful, please ask and I will track it down.
Thanks very much in advance!!! /HJProblem not entirely solved, but mostly working now. It turns out the issue was with the 3Com OfficeConnect VPN box. It was causing all sorts of headaches and had to be manually power cycled at least once a week, so we ditched it and got a Linux-based Firewall/VPN appliance (http://www.ingate.com/ingate_vpn.php).
Now I can connect and mount Windows drives via SMB (both the command line and the Finder's "Connect to Server" approach seem to work). Performance still exhibits annoying lags at random times, and occasionally the VPN connection disconnects for no good reason, but at least I can get at my files from home. The other issues -- such as being able to resolve "xxx.yyy.local" addresses in the browser by making sure I hit the internal DNS server before any external ones -- all seem to be network configuration issues on my end.
In short, my guess is that the 3Com box was causing issues with some low-level timing parameters or other related settings in how the VPN connection was being established. I was just starting to teach myself about ARP tables, NTLMv2 authentication, and the like when we replaced it with the new firewall.
Hope this helps.
/Heywood -
Why updates keep failing since 10.9.2 to 10.9.4 (blank screen)?
I'm IT manager with 60+ Apple computers (mostly iMac and laptops) all running Mavericks and since 10.9.2, the automatic system updates keep failing on a few of my computers (10-12 computers out of 60). Users launch the system updates when they leave office by the night and when they come back next morning, login screen is black and there's only a moving cursor! No matter if you reboot, safe boot, verbose or EVEN reinstall OS (I tried it once), it's still the black login screen.
This problem is highly discussed on the web and there's an easy fix to force update to continue and succeed... but as IT manger I am very tired to fix manually several computer every time Apple release a system update!! For people who's wondering, the fix is to power off computer, restart in safe mode (shift key), then type your admin account, hit TAB and type your password within the black screen then after a few try the display will light up and update will continue and succeed after a final reboot.
I am just wondering why updates keeps failing since 10.9.2, also in 10.9.3 and still in 10.9.4... it's not happening on specific Mac model/year and my computers are not "ghosted" (restored) from disk image on each other... there's no link between the computers who's failing and those who succeed to update!! They are in different department of the business and they are not having same software installed. Few are for office work (Ms-Office) and other are graphic design (Adobe) or video. Almost all users are non-admin but a few are admin and both admins and non-admins are failing!
If you have some hints for me, I'll be very appreciated since I lost so much time to manually relaunching the update. Thx!!The article is quite interesting. Quite a Mea Culpa from Apple!
Translated, the article says -- if you get any of these errors, iTunes and/or IOS have corrupted your device to the point where it cannot be recovered. You must reinitialize (i.e. restore from backup) your device. -- excetp that the first step "Copy your backup" is less than informative or useful.
Under OSX, the mentioned location contains nothing but a bunch of files named with a string of digits.
Yes, I know what they represent and how to translate them -- howver, I pitty joe-user with no experience with OSX.
The bulk of the article is for Windows systems. Very little information in that article applies to OSX.
The funny, but sad, thing is the first thing they tell you to do is to update OSX and iTunes and security software -- when in fact that is what cause the problem in the first place. Granted the articles pre-date the OSX/iTunes updates which caused the problem.
However, all of that blather ignored -- the article does NOT address my problem.
Unless it really does.
I have no issues (apparently) with successfully backing up my iPhone. At least iTunes claims that it is being successful.
What is failing is the second half -- the Sync.
OF course, that is if you belive iTunes -- which, according to the /Library/Logs/MobilBackup/MobilBackup.log, has in fact NOT happened now since January!
Very interesting.
Thanks for your suggestion.
However, I continue to hunt. -
The photoshop library operation failed because quicktime is not installed on this computer
I'm getting this when importing a Photoshop Timeline Animation into After Effects.
"The photoshop library operation failed because quicktime is not installed on this computer"
I have all updates to date.
Any clues?After Effects CC (12.x) does not import animation/video layers in PSD files. You should render and export your animation from Photoshop as a movie file and import that into After Effects.
-
The negotiation with the VPN server failed. Verify the server address and try reconnecting
Hi folks,
I am unable to connect VPN, While connecting error occurred. Can anyone advice how to solve this issue.
"The negotiation with the VPN server failed. Verify the server address and try reconnecting"
Thanks
VinothThis might help, at least from Harald's post onwards.
-
i already did the Hidding part and later moved the events and projects to the FCP events and projects folder . I still cannot share - keep getting this message "THE SHARE OPERATION 1080P FOR APPLE DEVICES (10 MBPS) HAS FAILED. Quicktime Error -50
I dont know what else to do to be able to share my project - I know i updated FCPX before i shared this project but i dont know what im doing wrongmasterpieces wrote:
later moved the events and projects to the FCP events and projects folder .
Can you explain in detail what you did?
Do any other shsre destinations complete? If not, do you get the same error message? -
Hi all,
Finished editing a short movie.
Then went to share on vimeo but got this message - see also screenshot when I tried to export to desktop.
Problem when exporting to Vimeo I get message "The share operation has failed. Quicktime error: -50" The file only gets to 8%.
Have tried deleting my render files for the project and also another fix mentioned of deleting any black space files on the edit itself but neither work?
Just upgraded to OS Mavericks could this be causing it? If so how to downgrade?
thanks
Louis BThanks for your help both, I called Apple tech support and spoke to a really helpful chap called Andrea who helped me out. Now got my Master file sorted and am trying Vimeo upload again.
Just to clarify points for people out there with the same issue:
First steps
- Ensure background rendering is turned off in preferences
- Delete project and events render files
- If upgraded to Mavericks then go to FCPX in finder under applications hit buttons 'CMD' and 'I' together and tick the 'prevent App Nap' box.
Next Steps
I had already done all of this when Apple Tech spoke to me so we discussed the message 'Quicktime -50' and what it meant. It wasnt a purely generic error message but was not detailed enough to point to one specific issue. This problem had occurred in previous years (so Mavericks not wholly to blame) and patches were issued over the years by Apple to help resolve some of the problems.
The message essentially is indicating that there is a problem somewhere with the media in some way shape or form.
My export went to 8% then failed. Apple's answer was that the project settings were corrupted in some way.
So what they suggested (so simple I could kick myself) was to select all the media files by 'CMD + A' then copy them 'CMD + C' then create and open a new project timeline, and then paste in 'CMD + V'.
Then we tried export again this time to a master file with some settings detailed by Apple.
The difference now was it got to 40% then failed but due to a different reason 'error -1 frame 10124 error'
At last we get past the project issues and into the event media issues, it seems that when I loaded the compact flash last night, the iMac kept ejecting the reader so had to copy files over quickly and seems that some of the file clip I used although showed on the viewer, didn't seem to have loaded all the correct media, so selecting this clip frame 10124 on the viewer I found that it showed as red on the frame row which implied an issue. So I simply bladed it off and deleted it.
Then I reran the export to Master file and it worked, though jumping from 40% to 100% complete was a shock to me!
Now am trying the export to Vimeo - hope this helps some of you out there. Worst case pick up the phone to Apple and speak to the Final Cut Pro guys they can help.
best wishes,
Louis B -
My iCloud backup function failed since 02/28/2015.
My iCloud backup function failed since 2/28 till now?
Try signing in and out of iCloud and backup manually. This might solve the problem.
-
Sync from iPhone to iCal on MacBook has failed since the latest iPhone upgrade, yesterday. It's worked in reverse, and all other sync operations appear to have worked. Any solutions, that I may not have already tried (over and over)
(Sorry, first time user of these forums, and it's confusing in it's own right)You may have to try deleting all the music from your phone (by going to Settings>General>Usage>Music, swipping All Music and tapping Delete), then sync it all back on with iTunes in order to fix this.
Maybe you are looking for
-
Can I share an Exchange account Calendar with another icloud user?
How do I get my work calendar onto the my iCloud accout, and how do I share it with another iCloud user? he exchange calendar is currently on my iphone calendar, but I can't find a way to see it on my iCloud.
-
SQL Loader and Error ORA-01847/ORA-01839
Hi, While using the direct loading in SQL-LOADER when we get the ORA-01847/ORA-01839 all the other records are getting errorred out. It goes fine with the conventional loading. Should I use some parameters or anything to make sure that all the other
-
Flash AS3 OOP = Can 1 objects class find and change another objects xy properties?
What I have is a game with a Level object, inside the Level is a Player object, and they don't have instance names given, what I'm trying to figure out is how to do is make it so that the player can change the x or y properties of the Level object. T
-
Iphone not working properly, can i get a new one for free if this is the first time it's happened?
The other night I went to a friend's house and my phone was sitting on the table. Someone bumped into the table, causing a drink to spill all over my iPhone 4S. Now, the volume buttons and the volume itself no longer works. As well as my speaker p
-
Dear Gurus, Do you have any configuration documents for eSourcing and CLM? If not, could you point me in a direction where I can get it. We are in the process of setting up eSourcing and CLM and need some document to set the standard functionalities