VPN/Security Management Solution

Will VMS v2.3 support IDSM/IPS 6.x when it is released in the near future?

Hi,
The short answer is no.
See this thread:
http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Security&topic=Intrusion%20Prevention%20Systems/IDS&CommCmd=MB%3Fcmd%3Ddisplay_location%26location%3D.1ddc61f2
HTH
Andrew.

Similar Messages

  • CiscoWorks VPN/Security Management Solution

    What is the difference between VMS server and VMS client?

    Server runs VMS, the client is anything that will connect to the VMS console remotely.

  • Install cisco security manager

    Good morning:
    I adquire a CSM license and need install, only have one server and this is installed LMS 3.2.
    Follow the installation instructions, i found that this CSM can't be installed in the same server that LMS.
    This is the paragraph:
    "We do not support the coexistence of Security Manager with any third-party software or other Cisco software (including any CiscoWorks-branded “solution” or “bundle,” such as the LAN Management Solution [LMS] or the VPN/Security Management Solution [VMS]), unless we state explicitly otherwise in this guide or at http://www.cisco.com/go/csmanager
    Someone can tell me if this is definitive or can install both in the same server.
    Thank's in advanced

    Yes both cannot be installed on the same server. Even if you manage it by some 'fancy' trick, it won't be supported by Cisco TAC. If you have only one physical server available, consider VMWARE. Regards
    Farrukh

  • Feedback - CiscoWorks Security Information Management Solution

    Can somebody share his experience with
    CiscoWorks Security Information Management Solution (CiscoWorks SIMS)?
    How do you like it? Is it doing what it is supposed to do well?
    Thanks

    I have installed the SIMS 3.1 appliance into a small web hosting network. I have 4 Cisco IDS, 8 routers, and 6 Pix firewalls all reporting to the unit.
    I am in the process of exploring all the different reports available. So far I am happy with automated reporting capability.
    I have found that the vast majority of events are due to system misconfiguration, network cleanup, etc. There is definitely a significant effort to tune your reporting devices in order to avoid false positives and other "noise".
    I am also looking into the Risk Management cabability but the documentation is less than helpful. Apparently the "brute force" method of just diving in and testing all the capabilities of the system is the only way to really learn it.
    Let me know if you have any specific questions and I will do my best to answer.
    JT

  • Manage a Cisco Secure ACS Solution Engine?

    Hello,
    how can i manage/observe a 'Cisco Secure ACS Solution Engine'? Ich found no things like SNMP etc.
    regards
    Karsten

    Hi,
    you have no chance to control the ACS SE with snmp. We have one router, access via ACS and uses a script roboter to control the access to the router. If the access fails, we send us an email
    Bye Michael

  • Cisco Security Manager Advice

    Hi,
    I'm looking into Cisco Security Manager. From what I understand you can monitor and manage Cisco security appliances. I'm interested in the monitoring of our Cisco ASAs - specifically, monitoring VPN sessions and their  trending over months at a time and I would like to monitor other Cisco devices on the network for link problems/performance and such - I don't want to use Cisco Security Manager as a management point. Would Cisco Security Manager not be the right tool for this?
    We have SolarWinds and I've heard that you can assign UnDPs(Device Pollers) to devices you want to monitor, including ASAs and these pollers can give you trending for VPN sessions with graphing. I just want to make the most of our budget dollars.
    Any advice?
    Thanks, Pat.

    CSM 4.3 and above can be used to monitor VPN sessions on Cisco ASAs. You can definitely use CSM as a monitoring only solution for ASAs (without using it for management). You can also explicitly disable policy change privileges for all admins so they do not modify stuff by mistake. Note however that CSM is primarily focused on end-to-end management scenarios (including policy change, troubleshooting, reporting, etc). So you may not find all the bells and whistles in CSM for monitoring scenarios that you may find with some of the pure monitoring only solutions.

  • Cisco Security Manager 3.2.1 Sp1 and Public Key Infrastructure

    Hi, all!
    Recently I created configuration on PIX (FOS 7.2.4) with Cisco Security Manager 3.2.1 Sp1 to allow to work with certificate-based authentication of VPN connections. CSM created necessary commands (and unfortunately many necessary commands left unsupported too). But every time I upload new configuration (even with untouched PKI configuration) CSM adds following command - "crypto ca enroll CA-NAME noconfirm".
    Right now I created FlexConfig which just do "no crypto ca....". And it works. But is there more clean solution? Why do I need to enroll every deployment?
    Wait for answers.
    With best regards
    Maxim

    Hello,
    I'm having the same problem for one of our customers! but flexconfig didn't work!
    Can you please be more specific what exactly you did! Flex config doens't remove generated command it's adding the no crypto ca enroll 'trustpoint name' after the generated crypto ca enroll 'trustpoint name'
    I've been also looking for related bugs but didn't find any!
    Regards

  • Problem In Client Security Manager

    My LapTop is 450G2.
    I am using the hp client security manager software.
    I had a question:
    If Password Manager does not detect some of the program or website such as logon screen automatically
    Or Not appear The logon Sign In the corner of The website automatically How should I fix this probleme?
    In other words
    If I want to Use  the software "Digital Person Personal" , What should I do?
    HELP ME PLEASE

    Hi 
     You could try the new password manager.
     http://support.lenovo.com/en_US/downloads/detail.page?&DocID=DS031504
    Or you could try to delete all the files,
    Find Client Security Solution in user profile folder (Search hidden), and delete them all.
    And restart system.
    Before doing this, remember to export passwords

  • Disable or uninstal HP ProtectTools security manager

    My fingerprint scanner has gone down.
    I assume it is a hardware issue as have gone through all HP recomendations to get it working at: http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c02519007&lc=en&jumpid=reg_r1002_us...
    but nothing has worked.
    Anyway the notebook never leaves my house so it's not an issue. However, everytime I turn the notebook on and log in with my password, HP security manager butts in and spends a minute looking for the reader before telling me the biometric authentication service is not working and asks if I would like to continue without it.
    Can I disable this program to speed boot up time as it is not needed in my instance?

    Hi @taliz ,
    To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at Commercial Forums.
    Even though this is a Commercial product, You could follow these steps, even though, I don't recommend this as it is Security Tools.
    Step 1:Click Start, then "All Programs." Select "HP Protect Tools Security Manager" from the list of programs.
    Step 2:Click "Settings." Click the box to the left of the menu. The green check in the box should disappear, which means that the application is disabled.
    Step 3:Close the window and restart the computer. 
    Hope this helps you.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • HP Client Security Manager

    Hi the HP Client Security is a major problem for me. I have set up all the normal credentials etc but wherever I go to log on a website the Password Manager icon does not present on the screen for me to enter the details of my username and passwords. I ahve tried this on many sites and the icon does not appear therefore I cannot use the Client Security. I even uninstalled adn installed the lates version and still the icon does not appear on the screen when logging on to various websites. Any help much appreciated thank you!!

    Here is the link to download HP Client Security Manager VERSION: 8.1.0.1451
    ftp://ftp.hp.com/pub/softpaq/sp61001-61500/sp61498.exe
    I am an HP employee.
    Regards,
    Vidya
    Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
    ***Click on "Thumbs up" button to the bottom right side of my post to say thanks!***

  • No security manager: RMI class loader disabled Error at RMI client programm

    Got following error on invoking remote method from RMI client,
    java.rmi.UnmarshalException: error unmarshalling return; nested exception is:
    java.lang.ClassNotFoundException: com.rmi.RmiImpl_Stub (no security manager: RMI class loader disabled)
    Please let me know solution.

    Hello JAAZ,
    I got the same error yesterday. I was a little frustrated, because the day before everything was fine...
    java.rmi.UnmarshalException: error unmarshalling return; nested exception is:
            java.lang.ClassNotFoundException: uk.co.it.ete.server.ETE_Server (no security manager: RMI class loader disabled)
            at sun.rmi.registry.RegistryImpl_Stub.lookup(Unknown Source)The solution was, that I did some refactoring and some of the classes were now in different packages. I updated the system on the client-side and now everything works again.
    I think debugging RMI-applications is not as easy as "normal" applications ..
    maybe this helps..
    Regards
    tk

  • Differences in setting a security manager

    Hello,
    what is the difference between installing a security manager using a system property like this:
    -Djava.security.manager=java.rmi.RMISecurityManagerand by executing the following at the beginning of the main method:
    if (System.getSecurityManager() == null) {
         System.setSecurityManager(new RMISecurityManager());
    }To my understanding of the various reference documentations for java security, they should be equivalent in the obtained result. In my case, however, the system property one doesn't work, that is classes are not downloaded dynamically; everything works fine with the java code solution.
    Many thanks,
    valerio

    Works for me.
    -Djava.security.manager=java.rmi.RMISecurityManagerThis argument needs to appear first on the command line, before any other -D and -jar arguments.
    NB the RMISecurityManager is obsolete, you can use java.lang.SecurityManager. See the Javadoc. You can just specify:
    -Djava.security.manager=defaultor just:
    -Djava.security.manager

  • HP client security manager 8.1 or later

    receive message 'need to install HP client security manager 8.1 or later before installing Device access manager for hp protect tools where do I find it
    This question was solved.
    View Solution.

    Here is the link to download HP Client Security Manager VERSION: 8.1.0.1451
    ftp://ftp.hp.com/pub/softpaq/sp61001-61500/sp61498.exe
    I am an HP employee.
    Regards,
    Vidya
    Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
    ***Click on "Thumbs up" button to the bottom right side of my post to say thanks!***

  • About security management

    hi all,
    i want to know about security management system.cn any one send me the documentation or any related presentations to the below mail gupta1428(@ gmail)
    if possible plz explain me clearly.......
    please help me to get out this problem
    thanks in advance.....
    thanks,
    gupta.
    Edited by: gupta pullipudi on Apr 10, 2008 4:40 PM

    >
    gupta pullipudi wrote:
    > can u provide me any links for compleate documentation............
    Dear Gupta,
    I guess you're asking for the training manual from the SAP courses ADM940, ADM950, ADM960?
    You'll find the extract of these fine courses in the SAP Help Portal: [http://help.sap.com|http://help.sap.com]
    There you have to click on "SAP Solution" -> "SAP NetWeaver" -> "Overview" -> "System Configuration and Administration" -> "Security Guide".
    As easy as !!!
    Regards,
    Klaus

  • HP Security Manager 7 not installing in Win 7 (64 bit)

    Hello Tech Gurus, This is very surprising.  I was using HP Protect Tool Security Manager 7 for last 3 years. But there were some problems due to which I uninstall all the HP security softwares and tried to install Validy Finger Print Driver, Security Manager, HP Face Recognition software. So I downloaded the latest driver from the below HP site. https://h20566.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=5229456&swLangOid=8&swEnvOid=4059 sp57486 - Security Manager (7.0.1.1199)sp58940 - Face Recognition for HP ProtectTools (7.2.1.4548)sp64338 - Validity Fingerprint Sensor Driver  (4.4.228.0) Fingerprint Driver got installed but Security Manager and Face Recognition software is not installing.When trying to install Security Manager its saying "This Software is not supported on this system". Its not possible because I have used the same software earlier. Even I tried to install previous version of Security Manager which I downloaded 2 years back and woked fine also. But getting the same error. I am not able to understand how to resolve the issue? Can anyone please help me? System - Probook 4540sOS - Win Prof 7 ( 64 bit) Thanks,Suvendu  

    USB-Parallel converters can be problematic.  The models listed in posts flagged here have been verified by users to work with 64 bit Windows 7.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Maybe you are looking for