VPN Server Feature for WRT1900AC

Hi there,
is there a timeline for when the VPN Server feature gets implemented into the WRT1900AC router? That particular feature decides whether I'm buying it or not.
Cheers,
Dave

Thanks guys, but you are missing the point.
See here: www.linksys.com/en-us/press/releases/2014-04-10_Linksys_Starts_Shipping_the_WRT1900AC_the_Successor_...
"Linksys is also planning to add Wi-Fi Scheduling and an OpenVPN-based VPN server to the WRT in a future firmware update to enable users to establish a secure remote connection to the router from anywhere in the world."
I wanted to know from Linksys or some insiders here in the forum, whether there is already a rough timeline on this feature. F.i. in which quarter the users can expect it to be implemented.
Cheers,
Dave

Similar Messages

Does ASA ezVPN support reactive primary vpn server feature

hi,
i am going to configure asa5505 as the azvpn client . and configre primay and secondary vpn server in the list.
i find some feature that is support by ios ROUTER ezvpn, not sure it will be support on ASA ezVPN???
Question? will the ezvpn fall back to the primary vpn server , if primary back on line, on ASA ?
Reactivate Primary Peer
The Reactivate Primary Peer feature allows a default primary peer to be defined. The default primary peer (a server) is one that is considered better than other peers for reasons such as lower cost, shorter distance, or more bandwidth. With this feature configured, if Easy VPN fails over during Phase 1 SA negotiations from the primary peer to the next peer in its backup list, and if the primary peer is again available, the connections with the backup peer are torn down and the connection is again made with the primary peer.

No, the Primary peer won't be tried again until the phase 1 tunnel is torn down and reactivated. Re-keys do not count. Hope this helps.

VPN Server solution other than Leopard Server?

All,
Does anyone know of any VPN server solutions for Mac OS X other than the basic one included in Leopard Server?
Regards,
Ken

I use the one that comes with Leopard as well as VPNClient from Cisco. I have to use the Cisco one for one connection which requires we use this client.
You can do a search here - just plug in the search term "VPN" and you'll get a whole bunch of them.
http://www.versiontracker.com/
Hope this is helpful.

SharePoint 2013 SQL Server Edition for BI Features - must be on SharePoint SQL Server?

I need to install SQL Server 2012 for a new SharePoint 2013 installation.
Let's say I want to use the BI features of SharePoint 2013 like PowerView.
I already have a separate SQL Server running SQL Server 2012 BI Edition that is used as the database server for our data warehouse and some apps. But this SQL Server will not be used to house the SharePoint 2013 databases.
Do I need to install SQL Server 2013 BI Edition on the SharePoint 2013 SQL Server (where the SharePoint 2013 databases will be housed) or can I used SQL Server 2013 Standard Edition on that server and utilize the BI Edition on the data warehouse server to
use the BI features of SharePoint?

Yes, BI or Enterprise must be installed on the SharePoint server in order to integrate SSRS. PowerPivot can be on a separate server with just a download (http://www.microsoft.com/en-us/download/details.aspx?id=35577) for certain components residing on
the SharePoint server. This will give you PowerView, as well.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

SQL Features for FIM Synchronization Server

Hi,
As we need to Install the FIM Synchronization server of FIM 2010 R2 SP-1 only. Could you please suggest if all the below sql server features are mandatory to install for FIM synchronization Server.
Database Engine Services
Full-Text Search
Analysis Services
Reporting Services
Business Intelligence Development Studio
Integration Services
Management Tools - Basic
Management Tools - Complete
Thanks
Harry

Hi Harry,
According to
this article, the SQL Server features that are required for a Sync Services installation are the Database Engine Services and (optionally) the Management Tools - Basic.
Cheers,
Tom Houston, UK Identity Management Practice

Security warning for any connect VPN " Untrusted VPN server Certificate"

Is there any way to disable this security warning ( " Untrusted VPN server Certificate") with self sign certificate on the ASA

Hi Anton,
Please have a look at the link below:
http://docs.acl.com/ex/300/index.jsp?topic=%2Fcom.acl.ax.exception.installguide%2Fexception%2Finstallation%2Ft_installing_the_self-signed_certificate.html
This is for IE. You should get steps for FF and CHROME out there easily as well.
Regards,
Kanwal
Note: Please mark answers if they are helpful.

Is the Upload to Server feature working in CS6 for Mac . . . or any of the export modules?

Is the Upload to Server feature working in CS6 for Mac . . . or any of the export modules?

No, unfortunately the photomerge ui plugin will not work in photoshop cs6 on the mac side.
You can always use photoshop cs5 for those times when you really need it.
In photoshop cs6 you could align your photos manually as best you can, then select all the layers and go to Edit>Auto-Blend Layers>Panorama with Seamless Tones and Colors checked

The FTP server configured for this site doesn't seem to match the URL you entered. Make sure that you use the Upload to FTP Host feature in Muse to publish the site directly to the final location and that you are logging on to In-Browser Editing with the

When i tried to login in inbrowserediting.adobe.com i see that:
The FTP server configured for this site doesn't seem to match the URL you entered. Make sure that you use the Upload to FTP Host feature in Muse to publish the site directly to the final location and that you are logging on to In-Browser Editing with the same user.
What does it mean? What is problem?

Hi,
I have just created my First website using Muse and Its all been uploaded to my FTP server but i cant access the in browser editing which was the whole reason why i re-done the website for my client using muse
its saying the following
"The FTP server configured for this site doesn't seem to match the URL you entered. Make sure that you use the Upload to FTP Host feature in Muse to publish the site directly to the final location and that you are logging on to In-Browser Editing with the same user. server configured for this site doesn't seem to match the URL you entered. Make sure that you use the Upload to FTP Host feature in Muse to publish the site directly to the final location and that you are logging on to In-Browser Editing with the same user."
Yet i Can access my website fine "www.calmwood.com.au"
My ftp server responds to either the IP Address or the DNS Address www.calmwood.com.au
so i am not understanding how it thinks its different. when its fully referenced
any help would be appreciated.
thanks

I do not see where to enter IP addresses in the Open VPN setup. Also, how can I set it up so that I can choose different servers in the same way as I can currently choose them with my VPN app but for PPTP?

I think I have it working on my iPhone 5. But, I do not see how I can control the exit point that I would like for the VPN. Are all the exit points shown in the VPN setting now going to work with Open VPN, or do they remain PPTP? If I am reading correctly, they look like they remain PPTP. If I cannot control the exit point for open VPN, which exit point is the default in the profile you provided me?I note that Open VPN Connect does not work with any of the new 64 bit devices like the iPhone 5S, the iPad Air, and the new iPad MIni. Is there any chance that you guys will come up with an update for your app so that open VPN can be made to work on all iOS devices? That would be nice, particularly if the Open VPN Connect app does not give me a choice of exit points.Thanks,
I do not see where to enter IP addresses in the Open VPN setup. Also, how can I set it up so that I can choose different servers in the same way as I can currently choose them with my VPN app but for PPTP?
Just a quick note to tell you that Open VPN has updated their app so that it is compatible with 64 bit ARM devices like the iPhone 5S, the iPad Air, and the iPad Mini Retina.That does not resolve the problem of how to easily choose among the various possibilities for the exit server. We need to find an easy way to choose.

Thank you for trying the new Firefox. I'm sorry that you’re unhappy with the new design.
I understand your frustration and surprise at the removal of these features but I can't undo these changes. I'm just a support volunteer and I do not work for Mozilla. But you can send any feedback about these changes to http://input.mozilla.org/feedback. Firefox developers collect data submitted through there then present it at the weekly Firefox meeting
I recommend you try to adjust to 29 and see if you can't make it work for you before you downgrade to a less secure and soon outdated version of Firefox.
Here are a few suggestions for restoring the old design. I hope you’ll find one that works for you:
*Use the [https://addons.mozilla.org/en-US/firefox/addon/classicthemerestorer/ Classic Theme Restorer] to bring back the old design. Learn more here: [[How to make the new Firefox look like the old Firefox]]
*Use the [https://addons.mozilla.org/en-US/firefox/addon/the-addon-bar/ Add-on Bar Restored] to bring back the add-on bar. Learn more here: [[What happened to the Add-on Bar?]]

How do I change firewall settings modified by VPN server?

(This actually happened while I was running Lion, but seems to be the same problem under Mountain Lion)
I installed Check Point Software Technologies Ltd. Endpoint Security VPN for Mac E75 VPN client on my iMac to access my employer's network. It worked, but after I logged onto my employer's network, I lost contact to both my Time Capsule and Airport Express (Airport Utility stops "seeing" them, even though I am still connected over wi-fi to the internet through the airport router in the Time Capsule), and iTunes stopped "seeing" my iPad and iPhone.
I looked on Check Point's support pages and saw this "Known Limitation":
Issue ID: 00885275
After Endpoint Security VPN is installed and a client is connected to the gateway, automatic sync with Time Capsule and iPhone Wi-Fi sync might not work correctly.
This can happen because of a restrictive Desktop Policy.
To resolve this issue, allow these services in the "Inbound rules" of the Desktop Policy:
SSDP: UDP, port 1900.
mDns: UDP, port 5353.
Further research in the Endpoint Security VPN for Mac E75 Administration Guide told me this about "Desktop Policy":
The Desktop Firewall
Endpoint Security VPN enforces a Desktop Security Policy on remote clients. You define the Desktop Security Policy in a Rule Base. Rules can be assigned to specific user groups, to customize a policy for different needs.
Important - Before you begin to create a Desktop Security Policy, you must enable the Policy Server feature on the gateway.
Endpoint Security VPN downloads the first policy from the gateway. It looks for and downloads new policies every time it connects or on re-authentication.
When Endpoint Security VPN makes a VPN connection, it connects to the gateway and downloads its policy. Endpoint Security VPN enforces the policy: accepts, encrypts, or drops connections, depending on their source, destination, and service.
So (I think) what happened is when I logged on to my employer's network, it re-configured my firewall to limit my network connections resulting in the above-described problems.
Logging out did not change anything. Uninstalling the VPN client did not change anything. It looks like the changes "enforced" by the VPN client are persistent, and can only be changed "manually."
I doubt I will be able to prevail upon my employer to change its desktop policy. So I'm ready to bail on using the VPN client, but how do I reverse the changes my employer's "desktop policy" made?
The System Preferences Firewall options seem kind of high level. I would note that iTunes looks like it is open to all connections.
Thoughts? HELP.

It is not something I have played with.. but I would turn off the Mac's firewall and see if that fixed the problem.. the firewall of the Mac is helping your security.. but the main security is actually the NAT router in the TC. It is extremely difficult to break NAT routing.. It is effectively a firewall itself. So turning off the firewall in the Mac is not a biggie. The reason I want you to do that even if just for a few minutes.. and perhaps turn it off and reboot the computer to make sure the rules have stopped being applied.. is to see if the firewall is actually the culprit.
What I am reading from what you have posted is the vpn client itself is the software blocking connections. And I doubt a third party software would change rules to the internal firewall.. but i am guessing.
Once you have tested it.. if the firewall off fixes it.. then you will need to hunt around.. perhaps in a TM backup for the actual file that is altered that contains the rules.. I have not looked.. and don't use firewall on the end client anyway as I have a firewall rated router.
If the firewall off does not fix the problem.. which is what I suspect. Did you use the uninstall software correctly and did it give any error messages??
Go to the activity monitor and check all the running processes.. anything there that is named after the vpn.. try to quit. See if you can stop the process.. If the issue is major.. and the process won't quit see if the Checkpoint support can help or google their knowledge base for info on how to get back to normal operations.

Windows 8.1 VPN Server Setup - No Network softwaare to choose

Hi Everyone
Windows 8.1
Setting up an incoming VPN Server.
When I try to create a New Incoming Connection via Control Panel > Network and Sharing Center > Change adapter settings > Alt - F > New Incoming Connection.
The wizard appears so I check the User Account > Next > Check Through the Internet > Next bringing up the Allow connections to this computer window where I should be able select Networking software to be enabled and then go on
to click Allow Access button. The networking software to highlight window is blank. Using the Install... button below this window brings up the Select Network Feature Type window where I can highlight a feature (Client, Service or Protocol)
and click Add button . It returns to the Allow connections window which has not changed and nothing is added. Still blank.
How do I get the network software to be there to select?
I have done this on other machines and had no problems at all. It worked the way it should.
After I did an image and reset operating system, the VPN Server Setup worked as it should. Restored image as it is way to much work to rebuild the machine. So any ideas?
Any and all help will be appreciated.
Thanks in advance. Lowell

Hi,
Did you mean you have solved this problem by resetting Windows?
Regarding to current information, this issue can be caused by port settings or corrupted Windows components.
Please check if the VPN port 1723 has been set as allowed in both your Firewall and router settings pages.
Also, we may fix such issue by running following repair command:
NOTE: Please run these commands as administrator.
SFC /SCANNOW
dism /online /cleanup-image /restorehealth
For further help, you can upload %windir%\logs\CBS\cbs.log and %windir%\Logs\DISM\dism.log into Onedrive or similar file service and share the link here for our research.
Kate Li
TechNet Community Support

New Quantum G-1100 have a VPN server?

Does the new Quantum G-1100 have a VPN server? Trying to decide how to reconfigure my network to ditch the actiontec router.
Solved!
Go to Solution.

Now that I know what you meant, I'll add that VPN server isn't something most people are looking for. I'd call it a fairly advanced feature. The G1100 is not targeted at super users. It is a very good, general purpose device for the majority of FiOS users. I woudn't call it "limited," just mainstream.
At $199, I do think it's overpriced as there are plenty of other routers at that price or below with more features. Verizon sometimes discounts it with certain bundles and/or speed tiers. They've had it on sale in the past. At lower prices or even free, it's a decent box for most people.
Since you're a super user, you probably don't want to bother with the Quantum. Stick with an Actiontec and put your router behind it. There's a good FAQ over on DSL Reports that describes the different ways to use a non-Verizon router and the trade-offs. If you don't have TV, you can simply switch your ONT to Ethernet WAN and then plug your router in (be sure to release your WAN IP before removing the Verizon router, or you'll have to wait two hours for it's lease to expire).
http://www.dslreports.com/faq/16077
Enjoy.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

SR520 VPN Server Vista

Hi there,
we setup a VPN Server from the CCA. We used the default Security -> VPN Server path. We then exported the VPN Profile to a PCF file.
The Cisco VPN client works fine on 32bits operating systems.
How do we set this up on Vista and Windows 7? The Client installer says '64 bits not supported'
The Cisco AnyConnect VPN client has no option to import a PCF file. And the manual says it does not support IPSec/UDP.
What are we to do?
Eljakim

One more issue:
you can setup websites from the internet that can be used from the outside after logging on from the Cisco web interface, but without actually setting up the VPN.
This is a nice feature. It works fine for non-secure (http) websites. However, we also a https site on the inside with a self-signed certificate (iomega storage device). This device cannot be accessed this way.
So two questions remain (I've given up on the Mac issue):
* how do we install a new certificate for the SR520 from the CCA
* how do we get https websites to work

How to setup built-in VPN server on Mountain Lion

Anyone have information on configuring the built-in VPN server in OS X Mountain Lion ?

Update - it works ! At least I can connect to Mountain Lion (not server) from my iPhone using the VPN Server Configurator app.
Here's what I did :
1) download the app and install
2) setup using the help files on the web page : http://www.greenworldsoft.com/product-vpn-server-help.html
3) at the last stage you need to setup port forwardin on your router
4) under Airport Utility 6.0 you cannot setup ports 500 or 4500 due to BTTM conflicts but setup the other 2 ports (1723 TCP and 1701 UDP), update airport extreme
5) download Airport Utility 5.6 from here : download already extracted utility it is in it's extracted form as is necessary under Mtn Lion (thanks to NetUse Monitor for the download - great app by the way)
6) run 5.6 and setup port forwarding (Advanced-Port Mapping) for the other 2 ports (500 and 4500 UDP), update airport extreme
7) that's it, I was able to connect to the VPN from my iPhone !

Unable to start admin server service for weblogic (startWebLogic.sh) Linux

I installed ECM 11g on Linux 64-bit , installed weblogic 12
so when I try to start admin server service for weblogic (startWebLogic.sh) and following error its showing
I found solution to give full access permeation for the user , but it's still same issue
and i am triyng to start services from the users how installed the Weblogic and ECM
bash-4.1$ '/home/ecm/Oracle/Middleware/user_projects/domains/ecm_domain/startWebLogic.sh' .
JAVA Memory arguments: -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m
WLS Start Mode=Development
CLASSPATH=/home/ecm/Oracle/Middleware/oracle_common/modules/oracle.jdbc_11.1.1/ojdbc6dms.jar:/home/ecm/Oracle/Middleware/patch_wls1211/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/home/ecm/Oracle/Middleware/patch_ocp371/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/usr/lib/jvm/jdk1.6.0_33/lib/tools.jar:/home/ecm/Oracle/Middleware/wlserver_12.1/server/lib/weblogic_sp.jar:/home/ecm/Oracle/Middleware/wlserver_12.1/server/lib/weblogic.jar:/home/ecm/Oracle/Middleware/modules/features/weblogic.server.modules_12.1.1.0.jar:/home/ecm/Oracle/Middleware/wlserver_12.1/server/lib/webservices.jar:/home/ecm/Oracle/Middleware/modules/org.apache.ant_1.7.1/lib/ant-all.jar:/home/ecm/Oracle/Middleware/modules/net.sf.antcontrib_1.1.0.0_1-0b2/lib/ant-contrib.jar:/home/ecm/Oracle/Middleware/oracle_common/soa/modules/commons-cli-1.1.jar:/home/ecm/Oracle/Middleware/oracle_common/soa/modules/oracle.soa.mgmt_11.1.1/soa-infra-mgmt.jar:/home/ecm/Oracle/Middleware/oracle_common/modules/oracle.jrf_11.1.1/jrf.jar:/home/ecm/Oracle/Middleware/wlserver_12.1/common/derby/lib/derbyclient.jar:/home/ecm/Oracle/Middleware/wlserver_12.1/server/lib/xqrl.jar:/home/ecm/Oracle/Middleware/Oracle_ECM1/ucm/idc/jlib/idcloader.jar:/home/ecm/Oracle/Middleware/Oracle_ECM1/ucm/idc/components/NativeOsUtils/classes-NativeOsUtils.jar
PATH=/home/ecm/Oracle/Middleware/wlserver_12.1/server/bin:/home/ecm/Oracle/Middleware/modules/org.apache.ant_1.7.1/bin:/usr/lib/jvm/jdk1.6.0_33/jre/bin:/usr/lib/jvm/jdk1.6.0_33/bin:/usr/lib64/qt-3.3/bin:/usr/local/bin:/usr/bin:/bin:/usr/local/sbin:/usr/sbin:/sbin:/home/ecm/bin
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http://hostname:port/console *
starting weblogic with Java version:
java version "1.6.0_33"
Java(TM) SE Runtime Environment (build 1.6.0_33-b04)
Java HotSpot(TM) 64-Bit Server VM (build 20.8-b03, mixed mode)
Starting WLS with line:
/usr/lib/jvm/jdk1.6.0_33/bin/java -client -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m -Dweblogic.Name=AdminServer -Djava.security.policy=/home/ecm/Oracle/Middleware/wlserver_12.1/server/lib/weblogic.policy -Xverify:none -Djava.endorsed.dirs=/usr/lib/jvm/jdk1.6.0_33/jre/lib/endorsed:/home/ecm/Oracle/Middleware/wlserver_12.1/endorsed -da -Dplatform.home=/home/ecm/Oracle/Middleware/wlserver_12.1 -Dwls.home=/home/ecm/Oracle/Middleware/wlserver_12.1/server -Dweblogic.home=/home/ecm/Oracle/Middleware/wlserver_12.1/server -Dcommon.components.home=/home/ecm/Oracle/Middleware/oracle_common -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Ddomain.home=/home/ecm/Oracle/Middleware/user_projects/domains/ecm_domain -Djrockit.optfile=/home/ecm/Oracle/Middleware/oracle_common/modules/oracle.jrf_11.1.1/jrocket_optfile.txt -Doracle.server.config.dir=/home/ecm/Oracle/Middleware/user_projects/domains/ecm_domain/config/fmwconfig/servers/AdminServer -Doracle.domain.config.dir=/home/ecm/Oracle/Middleware/user_projects/domains/ecm_domain/config/fmwconfig -Digf.arisidbeans.carmlloc=/home/ecm/Oracle/Middleware/user_projects/domains/ecm_domain/config/fmwconfig/carml -Digf.arisidstack.home=/home/ecm/Oracle/Middleware/user_projects/domains/ecm_domain/config/fmwconfig/arisidprovider -Doracle.security.jps.config=/home/ecm/Oracle/Middleware/user_projects/domains/ecm_domain/config/fmwconfig/jps-config.xml -Doracle.deployed.app.dir=/home/ecm/Oracle/Middleware/user_projects/domains/ecm_domain/servers/AdminServer/tmp/_WL_user -Doracle.deployed.app.ext=/- -Dweblogic.alternateTypesDirectory=/home/ecm/Oracle/Middleware/oracle_common/modules/oracle.ossoiap_11.1.1,/home/ecm/Oracle/Middleware/oracle_common/modules/oracle.oamprovider_11.1.1 -Djava.protocol.handler.pkgs=oracle.mds.net.protocol -Dweblogic.jdbc.remoteEnabled=false -Dipm.oracle.home=/home/ecm/Oracle/Middleware/Oracle_ECM1 -Ducm.oracle.home=/home/ecm/Oracle/Middleware/Oracle_ECM1 -Dem.oracle.home=/home/ecm/Oracle/Middleware/oracle_common -Djava.awt.headless=true -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=/home/ecm/Oracle/Middleware/patch_wls1211/profiles/default/sysext_manifest_classpath:/home/ecm/Oracle/Middleware/patch_ocp371/profiles/default/sysext_manifest_classpath weblogic.Server
<Sep 12, 2012 12:08:02 PM EEST> <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
<Sep 12, 2012 12:08:03 PM EEST> <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
<Sep 12, 2012 12:08:03 PM EEST> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) 64-Bit Server VM Version 20.8-b03 from Sun Microsystems Inc..>
<Sep 12, 2012 12:08:04 PM EEST> <Info> <Management> <BEA-141107> <Version: WebLogic Server Temporary Patch for 13340309 Thu Feb 16 18:30:21 IST 2012
WebLogic Server Temporary Patch for 13019800 Mon Jan 16 16:53:54 IST 2012
WebLogic Server Temporary Patch for BUG13391585 Thu Feb 02 10:18:36 IST 2012
WebLogic Server Temporary Patch for 13516712 Mon Jan 30 15:09:33 IST 2012
WebLogic Server Temporary Patch for BUG13641115 Tue Jan 31 11:19:13 IST 2012
WebLogic Server Temporary Patch for BUG13603813 Wed Feb 15 19:34:13 IST 2012
WebLogic Server Temporary Patch for 13424251 Mon Jan 30 14:32:34 IST 2012
WebLogic Server Temporary Patch for 13361720 Mon Jan 30 15:24:05 IST 2012
WebLogic Server Temporary Patch for BUG13421471 Wed Feb 01 11:24:18 IST 2012
WebLogic Server Temporary Patch for BUG13657792 Thu Feb 23 12:57:33 IST 2012
WebLogic Server 12.1.1.0 Wed Dec 7 08:40:57 PST 2011 1445491 >
<Sep 12, 2012 12:08:06 PM EEST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING.>
<Sep 12, 2012 12:08:06 PM EEST> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool.>
<Sep 12, 2012 12:08:06 PM EEST> <Notice> <LoggingService> <BEA-320400> <The log file /home/ecm/Oracle/Middleware/user_projects/domains/ecm_domain/servers/AdminServer/logs/AdminServer.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms, such as Windows.>
<Sep 12, 2012 12:08:06 PM EEST> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to /home/ecm/Oracle/Middleware/user_projects/domains/ecm_domain/servers/AdminServer/logs/AdminServer.log00009. Log messages will continue to be logged in /home/ecm/Oracle/Middleware/user_projects/domains/ecm_domain/servers/AdminServer/logs/AdminServer.log.>
<Sep 12, 2012 12:08:06 PM EEST> <Notice> <Log Management> <BEA-170019> <The server log file /home/ecm/Oracle/Middleware/user_projects/domains/ecm_domain/servers/AdminServer/logs/AdminServer.log is opened. All server side log events will be written to this file.>
Sep 12, 2012 12:08:09 PM oracle.security.jps.internal.keystore.file.FileKeyStoreManager openKeyStore
WARNING: Opening of file based keystore failed.
<Sep 12, 2012 12:08:09 PM EEST> <Error> <Security> <BEA-090892> <The loading of OPSS java security policy provider failed due to exception, see the exception stack trace or the server log file for root cause. If still see no obvious cause, enable the debug flag -Djava.security.debug=jpspolicy to get more information. Error message: JPS-06514: Opening of file based keystore failed.>
<Sep 12, 2012 12:08:09 PM EEST> <Critical> <WebLogicServer> <BEA-000386> <Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: The loading of OPSS java security policy provider failed due to exception, see the exception stack trace or the server log file for root cause. If still see no obvious cause, enable the debug flag -Djava.security.debug=jpspolicy to get more information. Error message: JPS-06514: Opening of file based keystore failed.
weblogic.security.SecurityInitializationException: The loading of OPSS java security policy provider failed due to exception, see the exception stack trace or the server log file for root cause. If still see no obvious cause, enable the debug flag -Djava.security.debug=jpspolicy to get more information. Error message: JPS-06514: Opening of file based keystore failed.
     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1402)
     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1022)
     at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
     at weblogic.security.SecurityService.start(SecurityService.java:148)
     at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
     Truncated. see log file for complete stacktrace
Caused By: oracle.security.jps.JpsRuntimeException: JPS-06514: Opening of file based keystore failed.
     at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:167)
     at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:369)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
     at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
     Truncated. see log file for complete stacktrace
Caused By: oracle.security.jps.JpsException: JPS-06514: Opening of file based keystore failed.
     at oracle.security.jps.internal.policystore.PolicyUtil.getDefaultPDPService(PolicyUtil.java:2855)
     at oracle.security.jps.internal.policystore.PolicyUtil.getPDPService(PolicyUtil.java:3097)
     at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:164)
     at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:369)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
     Truncated. see log file for complete stacktrace
Caused By: oracle.security.jps.service.keystore.KeyStoreServiceException: JPS-06514: Opening of file based keystore failed.
     at oracle.security.jps.internal.keystore.file.FileKeyStoreManager.openKeyStore(FileKeyStoreManager.java:374)
     at oracle.security.jps.internal.keystore.file.FileKeyStoreServiceImpl.doInit(FileKeyStoreServiceImpl.java:104)
     at oracle.security.jps.internal.keystore.file.FileKeyStoreServiceImpl.<init>(FileKeyStoreServiceImpl.java:76)
     at oracle.security.jps.internal.keystore.file.FileKeyStoreServiceImpl.<init>(FileKeyStoreServiceImpl.java:66)
     at oracle.security.jps.internal.keystore.KeyStoreProvider.getInstance(KeyStoreProvider.java:157)
     Truncated. see log file for complete stacktrace
>
<Sep 12, 2012 12:08:09 PM EEST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FAILED.>
<Sep 12, 2012 12:08:09 PM EEST> <Error> <WebLogicServer> <BEA-000383> <A critical service failed. The server will shut itself down.>
<Sep 12, 2012 12:08:09 PM EEST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN.>
bash-4.1$

Looks to be a cert or keystore issue. How do you have that setup?

VPN Server Feature for WRT1900AC

Similar Messages

Maybe you are looking for