VPN settings not saved after upgrading ipad

I got an ipad mini so I did a backup of my ipad 3 and restored that copy to the ipad mini.
Everything was restored ok with the exception of my VPN settings, it's a VPN from work and now I can only access that network from my ipad 3, not form ipad mini.
Please help

I'm having the same problem too. I backed up my iPad 3 settings and downloaded to my iPad mini, now the exchange email settings won't save.
The credentials are exactly the same as my iPhone, bit it keeps giving the message 'unable to verify account information'
Anyone else having this issue with the iPad mini not saving settings?

Similar Messages

Charger not working after upgrade iPad air to ios8

My iPad air charger not working after install ios8, can anyone help please, thanks

Hey andon,
The “voice-to-text” feature you are referencing uses Siri to translate your voice into text, so you will want to use the following article to help you troubleshoot this issue:
iOS: Troubleshooting Siri
http://support.apple.com/kb/TS4079
Thanks for being a part of the Apple Support Communities!
Regards,
Braden

Synatics Touchpad V7.5 settings not saving after Windows 10 update.

After I updated to Windows 10 it seems that all dirvers were updated as well. Now the settings won't save everytime I shut down my laptop. Can someone help me with this please?

Hi, I noticed this has been a widespread issue concerning HP laptops upgraded to Windows 10 that come with Synaptics drivers. Here is a fix I found: 1. Open Device Manager and uninstall the current driver v19.0.25.95 and tick the box that says delete the driver software for this device. 2. Open Programs and Features and uninstall the Synaptics program you see in there. 3. Head to your product page in the HP website and download the Synaptics drivers available for the OS version your laptop had prior to the Windows 10 upgrade. In my case, it's Windows 8.1. 4. Restart your computer. 5. Install the driver you downloaded from the HP product page of your laptop. Verify that the installation has finished, you need to go through the Device Driver Installation wizard. 6. Once again, open Programs and Features and check if a new Synaptics program is displayed there; its version should match the version you installed from the HP website. 7. Once again, open Device Manager and check if the Synaptics Touchpad driver changed. If not, you will see an option to Roll back to a previous version, click this and the driver will revert to the version you installed from the HP website. 8. A prompt will appear asking if you want to restart the computer now or later. Choose restart later. 9. Download this troubleshooter from Microsoft and refer to this link on how to use it. The troubleshooter, hides updates and when updates are hidden, Windows chooses not to install them. Link- http://reviews.gizmodo.com/heres-the-incredibly-hacky-way-to-disable-windows-10-up-1720768012 Troubleshooter- https://support.microsoft.com/en-us/kb/3073930 10. Once you have located and have hidden the Synaptics update, Try changing your touchpad settings through the Control Panel and reboot to check if it saves the settings you have chosen. I have found this as a better and safer alternative than completely disabling Windows automatic driver installation. Sources: Gizmodo (http://reviews.gizmodo.com/heres-the-incredibly-hacky-way-to-disable-windows-10-up-1720768012) Microsoft (https://support.microsoft.com/en-us/kb/3073930) HP (http://www.hp.com/country/us/en/uc/welcome.html)

'Open with'/'Always open with' file settings not saved after Mac get's shut down.

Every time I restart the computer, I have to re-change the 'open with' settings to files. How do you get the Mac to remember the settings after the computer is shut down. It used to not have this problem.

/System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/LaunchSe rvices.framework/Versions/A/Support/lsregister -kill -r -domain local -domain system -domain user
on Terminal does nothing.

Homepage settings not saved when upgraded to Dreamweaver 8

I recently upgraded from MX2004 to Dreamweaver 8. My
homepage was originally a preset page design (Halo Left Nav) that I
tailored to suit my needs. When I upload the page in dreamweaver 8
my personalised layout has been lost although my information has
remained. Is there any way that I can add the Page Design CSS Halo
Left Nav to my existing page without having to redesign the whole
thing. Although I am computer literate, this is the first website I
have designed so I am new to this. Any help would be greatly
appreciated as I have spent the last few hours looking everywhere
for an answer to this problem.
Peace.

Let's see the page, please.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Marincor" <[email protected]> wrote in
message
news:f58uhs$cb$[email protected]..
>
I recently upgraded from MX2004 to Dreamweaver 8. My
homepage was
> originally a preset page design (Halo Left Nav) that I
tailored to suit my
> needs. When I upload the page in dreamweaver 8 my
personalised layout has
> been
> lost although my information has remained. Is there any
way that I can
> add the
> Page Design CSS Halo Left Nav to my existing page
without having to
> redesign
> the whole thing. Although I am computer literate, this
is the first
> website I
> have designed so I am new to this. Any help would be
greatly appreciated
> as I
> have spent the last few hours looking everywhere for an
answer to this
> problem.
>
>
> Peace.
>

When I change font size using ctl + the settingis not saved after shutdown.

I have poor eye sight .A site I visit daily to read is easier with larger font. I use ctl + to enlarge t6he font but when I shut down my computer and the next time I go to the site it is back to normal. I have noticed that the "SAVE AND QUIT " option is no longer available.

You can use one of these extensions to set a default font size and page zoom on web pages:
*Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/
*NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/

IMessage does not work after upgrade to iOS 8.1.3 to my iPad 4

iMessage does not work after upgrade to iOS 8.1.3 on my iPad 4

I Fixed it by trying to sign in with a different ID and canceling when it asked For a password and then signed in with my ID and it works! No more error message. I got this idea from another discussion. Thank you for replying though.

IPAD-2 passcode not working after upgrading to 5.0 today

iPAD-2 passcode not working after upgrading to 5.0 today

Ditto here. Searching all over the web site for an answer, haven't hit paydirt yet. Meanwhile, I'm plain old locked out.
Bill

IOS 6 Facetime not connecting after upgrade in UAE It was before on an Ipad purchased in Uk, I am miserable, I know its the carrier Etisalat, I sincerely some one finds a fix for this.

OS 6 Facetime not connecting after upgrade in UAE It was before on an Ipad purchased in Uk, I am miserable, I know its the carrier Etisalat, I sincerely some one finds a fix for this help.

I attempted to uninstall QT and reinstall- the QT 7.4 installer failed to install (it said a more up to date version was present, even though I'd trashed the old one). I downloaded and reinstalled 7.5 but itunes still did not work.
While my solution wasn't ideal
1) It was what Apple told me to do!
2) It seemed preferable to A) A complete system reinstall, B) removing 264 .plist files one at a time, rebooting, and seeing which one was causing the problem.
I still have the old .plist files in another folder, and can replace them in my preferences folder if I decide I need them. Most apps will create a new .plist file on start-up if there is not one present, so unless it is a program where I have gone to great lengths to change preferences from default, I'm guessing I will not notice much difference (and if I do, I can always go to my archive of .plists, or on Time Machine for that matter...)

After upgrading iPad to iOS8, cannot sign in to iCloud. Password it not accepted even after resetting it. Sign-in box keeps popping up. Suggestions?

After upgrading iPad to iOS8, iPad cannot sign in to iCloud. Password is not accepted even after resetting it. Sign-in box keeps popping up. Suggestions?

This Apple Help page provides contact information for various countries for security problems with an Apple ID:
http://support.apple.com/en-us/HT5699

Iphone 4 Home button not working after upgrade to OS 4.3.5

Iphone 4 Home button not working after upgrade to OS 4.3.5.Please help!!!!!!!!

It seems that settings of mail accounts have something to do with it. I've delete my gmail account and am now using Microsoft Exchange. It seems better, yet not perfect. The issue is definitely due to OS 4.3.1
Apple answer is - no answer. It is a shame that the quality of their products, in terms of design and concept, is not match by a care for customers. It is not normal that I, as a customer, have to spend hours reading Apple Discussions forum to try to understand what the problem is. A little more respect for a customer that spend big $$$ buying their products wouldn't hurt.

After upgrading iPad 2 to iOS 7 , cannot open new tabs in safari . When pushing on " " , Safari close the application .

After upgrading iPad 2 to iOS 7 , cannot open new tabs in safari . When pushing on " " , Safari close the application .

Try a Restart.
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider. Press and hold the Sleep/Wake button until the Apple logo appears.
Resetting your settings
You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again.
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. Apple recommends this only if you are unable to restart it.
Or if this doesn't work and nobody else on the blog doesn't have a better idea you can contact Apple.
Here is a link to their contacts with most of the information below.
http://www.apple.com/contact/

TS1702 My app store, Apple ID, safari, and most other apps do not work after upgrading to iSO 6, How do i solve this problem?

My app store, Apple ID, safari, and most other apps do not work after upgrading to iSO 6, How do i solve this problem? Can somebody help me please?

The App store is a problem for many and I have not seen a solution.
What is "wrong" with your Apple ID?
Try the following:
- A reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory settings/new iPod.

IPhone Home Button not working after upgrade to ios 5.1.1

Hey everyone,
I'm pretty sure this is a software failure due to the symtoms the iPhone is showing;
0 - the home button does not work at all when the phone is turned on and running ios 5.1.1, well it used to work okay when i had ios 5.0.1, I upgraded to 5.1.0 and started working randomly, upgraded to 5.1.1 to see if it was fixed with no luck at all.
1 - When locked the screen does sometime light up, like when you press the home button and don't slide the unlock button. but it does not exit apps anytime, I mean it doesn't act like it's pressing the home button randomly but only when the phone is locked.
2- The button does work perfectly when iOS is not running: I can get in and get out of recovery and dfu mode at will, that wouldn't be possible if the button were broke.
3- what else? Oh yea, not really a symtom: Tried the 'home button calibration' several times.
4 - It's not filthy, since I really cleaned it thoroughly with a powerful tiny nozed air blower I got and gave a rubbing alcohol treatment too.
5 - when I shut the phone down it instantly turns back on, I can interrupt the turning on for turning the phone into dfu mode (i'm sure It's in DFU mode because the tinyumbrella log monitor tells me)
I'm now using the 'soft' home button that goes in the accesibility options, but hey, I didn't pay a ton of money for a phone that the same Apple is gonna break down.
It's out of warranty and I don't have apple stores where I live.
I'd downgrade to 5.0.1 in a snap if I could but I'm not into jailbreaking, so the shsh blob thingie is not a possibility.
Any apple dev around that can give me a workaround?
thanks a lot in advance
Added more info ~

I had the same problem with Home button not responding after upgrading from iOS 5.1 to iOS 5.1.1 on an iPhone4.   I solved it but not sure exactly what fixed it.   Here is what I did.
1. Took it local Apple store Genius appointment.   They used a special tool and took some lint out of the connector opening.   The Home button started working.   They said even though the phone was out of warranty, I could buy a new replacement one without a contract for $150.
2.   The Home button stopped working when I got home.   I got some compressed air in a can and blew the air through the connector to try and clean out more dust.   I now keep the phone with the connector opening facing down in my pocket.   I also struck the phone downward on my hand or other soft surface to force as much dust out as possible.
3. The Home button still was intermittent. I then tried to do a hard reset by holding the power on key and the Home button simultaneously for about 10 seconds. This doesn't work if the Home button doesn't respond.
4. I connected the iphone to Itunes via the USB to sync the phone. While connected, I did a Hard Reset by Holding the Power button and Home button simultaneously. I noticed the Home button responded better when connected to ITUNES via the USB.
5. I did a backup of the iphone4 by highlighting the iphone 4 while connected to ITunes and right mouse click and selecting BACKUP.    I was prepared to reset my phone4 in iTUNES and restore it from the backup.
The phone worked consistently before I had to do this.
6. As a last resort which I didn't need to do, I was going to copy all my settings for the iphone by selecting the phone in iTUNES and looking at all the sync settings.   I would then have restored the iphone to original factory settings and then sync the phone using the copied settings. This would have made sure that the backup didn't include the bug.
Fortunately, I didn't have to do step 5 and 6.   Things started working after Step 4. So I don't really know if it was the iOS 5.1.1 upgrade or pure coincidence that the Home button stopped working immediately after the upgrade.

ICloud mail settings not saved in System Preferences on Mountain Lion

I note that iCloud mail settings not saved in System Preferences on Mountain Lion even if I tick mail in Icloud then close system preferences then open system preferences and it is untiked again?
Does anyone know how to fix this?
Cheers
Paul

Back up all data. Don't continue unless you're sure you can restore from a backup, even if you're unable to log in.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Triple-click the following line to select it. Copy the selected text to the Clipboard (command-C):
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password. Nothing will be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1 or if it doesn't solve the problem.
Boot into Recovery. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

VPN settings not saved after upgrading ipad

Similar Messages

Maybe you are looking for