VPN up/down at scheduled times
Using a PIX525, Can a VPN be built which will automatically start up and shutdown the tunnel at scheduled times?
thanks..
If the VPN you are trying to build is like EzVPN or site to site VPN, then there is an option in the group-policy that you can configure "vpn-access-hours" -
In the case of EzVPN if the client is trying to establish a tunnel to the head end server, then you can specify the access-hours which will allow the tunnel to be established & torn-down at the configured time.
The rest of the time, the tunnel will try to get established but it will fail since the access-hours will not match.
All this will work only if the head end side is running version 7.x code.
Hope this sheds some light.
Rate this post, if it helps.
Cheers
Gilbert
Similar Messages
-
Schedule time to shut down cisco IP phones
Dear All,
i would like to ask if there is any way to schedule time on CUCM 7 allowing us to shut down cisco ip phones during week ends, and which cisco ip phone models that support this feature.
regardsHassan,
I'm no phone guy but if you want to POWER OFF the phones outside office hours there are serious implications to consider.
If your phones have PCs connected to them, there's a large chance that when the phones go off, the PCs will not be able to reach the network (because VoIP phones do not have bypass functionality).
Another thing is in an emergency, no one can make outgoing/incoming calls.
If this is what you want then you could try EnergyWise if you don't have acess to your CUCM services. Let's say you want to power off your phones at midnight and power up by 5am the next morning (weekdays):
!Globalenergywise domain security shared-secret energywise importance 60! Time Rangetime-range ONabsolute start 05:00 01 March 2013periodic weekday 5:00 to 23:59time-range OFFabsolute start 00:00 01 March 2013periodic weekday 0:0 to 5:00! Interfaceinterface GigabitEthernet0/1energywise level 10 recurrence importance 70 time-range ONenergywise level 0 recurrence importance 70 time-range OFFenergywise importance 60 -
Bakup did not start at the scheduled time?????
Hi all
Yesterday I scheduled my backup as usual at 1:00am and to my surprise the logs showed me that the backup was started at 9:30am in the morning............
In the morning when I tried to login I could not, I saw the status of the database it was shut down so I manually started the database which caused the backup that was started at 9:30am(which i could not see that it was running) terminated with errors.....................
Can any one please tell me how come the backup did not start at the scheduled time. However the backup of the next day was sucessfull.
Regards
MaheshHello Jaipal,
I suspect that an 'sapdba' session or 'brspace' session was active on the OS level.
Some user must have kept this session active knowingly or unknowingly.
The offline backup was waiting for the active session to complete / end.
The session probably was ended / terminated around 9:30 am
(Maybe the user terminated the sapdba / brspace session at 9:30 in the morning after resuming the office work)
The backup started as soon as the sapdba / brspace session was terminated / ended.
Regards,
Ammey Kesarkar
<i>'Award points for useful info'</i> -
I am getting ready to call and schedule to take imac in for service. Thought I would try on here first. It is shutting down all the time. Its like it just crashes.
Paul,
Thank you for the quick response. here is my mac. I sure hope someone can pin point the cause of this.
Hardware Information:
iMac (21.5-inch, Late 2009)
iMac - model: iMac10,1
1 3.06 GHz Intel Core 2 Duo CPU: 2 cores
12 GB RAM
Video Information:
NVIDIA GeForce 9400 - VRAM: 256 MB
System Software:
OS X 10.9.2 (13C64) - Uptime: 0 days 0:1:47
Disk Information:
ST3500418ASQ disk0 : (500.11 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
disk0s2 (disk0s2) <not mounted>: 499.25 GB
Recovery HD (disk0s3) <not mounted>: 650 MB
OPTIARC DVD RW AD-5680H
USB Information:
Apple Inc. Built-in iSight
Apple Internal Memory Card Reader
Canon MX410 series
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
FireWire Information:
Thunderbolt Information:
Configuration files:
/etc/hosts - Count: 1
Kernel Extensions:
com.rogueamoeba.InstantOn (5.0.2 - SDK 10.6)
com.Cycling74.driver.Soundflower (1.5.3 - SDK 10.6)
Startup Items:
HP IO: Path: /Library/StartupItems/HP IO
Launch Daemons:
[System] com.adobe.fpsaud.plist 3rd-Party support link
[System] com.adobe.SwitchBoard.plist 3rd-Party support link
[System] com.macpaw.CleanMyMac2.Agent.plist 3rd-Party support link
[System] com.oracle.java.Helper-Tool.plist 3rd-Party support link
Launch Agents:
[System] com.adobe.AAM.Updater-1.0.plist 3rd-Party support link
[System] com.hp.help.tocgenerator.plist 3rd-Party support link
[System] com.hp.messagecenter.launcher.plist 3rd-Party support link
[System] com.oracle.java.Java-Updater.plist 3rd-Party support link
User Launch Agents:
[not loaded] com.adobe.AAM.Updater-1.0.plist 3rd-Party support link
[not loaded] com.adobe.ARM.[...].plist 3rd-Party support link
[not loaded] com.google.Chrome.framework.plist 3rd-Party support link
[not loaded] com.google.keystone.agent.plist 3rd-Party support link
[not loaded] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist 3rd-Party support link
[not loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist 3rd-Party support link
[not loaded] com.macpaw.CleanMyMac2Helper.trashWatcher.plist 3rd-Party support link
[not loaded] com.zeobit.MacKeeper.Helper.plist 3rd-Party support link
User Login Items:
smcFanControl
Growl
iAntiVirus
HP Scheduler
HP Product Research
HPEventHandler
Internet Plug-ins:
Easy-WebPrint EX: Version: 1.1.0 3rd-Party support link
Google Earth Web Plug-in: Version: 6.2 3rd-Party support link
Default Browser: Version: 537 - SDK 10.9
Unity Web Player: Version: UnityPlayer version 3.1.0f4 3rd-Party support link
AdobePDFViewerNPAPI: Version: 11.0.06 - SDK 10.6 3rd-Party support link
FlashPlayer-10.6: Version: 12.0.0.77 - SDK 10.6 3rd-Party support link
Silverlight: Version: 5.1.20913.0 - SDK 10.6 3rd-Party support link
Flash Player: Version: 12.0.0.77 - SDK 10.6 3rd-Party support link
QuickTime Plugin: Version: 7.7.3
iPhotoPhotocast: Version: 7.0
AdobePDFViewer: Version: 11.0.06 - SDK 10.6 3rd-Party support link
EPPEX Plugin: Version: 3.0.5.0 3rd-Party support link
JavaAppletPlugin: Version: Java 7 Update 51 3rd-Party support link
Safari Extensions:
Facebook Improved: Version: 1.8
Add To Amazon Wish List: Version: 1.8
Omnibar: Version: 1.2
Social Fixer: Version: 9.0
Ultimate Status Bar: Version: 1.3
Pinterest: Version: 1.0
AddThis: Version: 1.7
Facebook Photo Zoom: Version: 1.1206.11.1
GMail Counter: Version: 0.9.3
Reload Button: Version: 1.2
SafariRestore: Version: 6.0.1
Facebook Cleaner: Version: 3.3
My eBay Manager: Version: 3.0.2.0
Turn Off the Lights: Version: 2.3.0.5
AdBlock: Version: 2.6.18
1-ClickWeather: Version: 1.0
Bing Highlights: Version: 1.0.24
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
User iTunes Plug-ins:
AudioScrobbler: Version: 6.0.5 - SDK 10.8 3rd-Party support link
User Internet Plug-ins:
CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 3rd-Party support link
Google Earth Web Plug-in: Version: 7.1 3rd-Party support link
3rd Party Preference Panes:
Flash Player 3rd-Party support link
Java 3rd-Party support link
Old Applications:
None
Time Machine:
Skip System Files: NO
Mobile backups: OFF
Auto backup: YES
Volumes being backed up:
Destinations:
My Passport for Mac [Network] (Last used)
Total size: 465.29 GB
Total number of backups: 61
Oldest backup: 2013-08-19 15:41:53 +0000
Last backup: 2014-03-18 16:18:22 +0000
Size of backup disk: Excellent
Backup size 465.29 GB > (Disk size 0 B X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU:
38% AAM Updates Notifier
19% iavd
8% iAntiVirus
4% WindowServer
1% Safari
Top Processes by Memory:
233 MB thunderbird
197 MB Safari
135 MB MailTab for Gmail
98 MB ocspd
61 MB WindowServer
Virtual Memory Information:
9.01 GB Free RAM
1.79 GB Active RAM
249 MB Inactive RAM
715 MB Wired RAM
291 MB Page-ins
0 B Page-outs -
ASA 5505 as a SSL VPN Server and Easy VPN Client at the same time?
Is it possible to configure and operate the ASA 5505 as a SSL VPN server and Easy VPN Client at the same time? We would like to configure a few of these without having to purchase additional ASA 5505 and use a 2 device method (1 SSL VPN Server and 1 Easy VPN Client). Thanks in advance.
I don't think it is possible. Following links may help you
http://www.cisco.com/en/US/products/ps6120/products_configuration_guide_chapter09186a008068dabe.html
http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a008071c428.shtml -
Eth0 is being up and down for several time during boot
My wicd doesn't connect to eth0 on the first attempt after boot up. It is configured to eth0 always have a higher priority to connect.
My dmesg shows that eth0 being up and down for several time during boot. I have e1000e in my MODULES list.
Here is my rc.conf
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# DAEMON_LOCALE: If set to 'yes', use $LOCALE as the locale during daemon
# startup and during the boot process. If set to 'no', the C locale is used.
# HARDWARECLOCK: set to "", "UTC" or "localtime", any other value will result
# in the hardware clock being left untouched (useful for virtualization)
# Note: Using "localtime" is discouraged, using "" makes hwclock fall back
# to the value in /var/lib/hwclock/adjfile
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# Note: if unset, the value in /etc/localtime is used unchanged
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
LOCALE="en_US.UTF-8"
DAEMON_LOCALE="no"
HARDWARECLOCK=""
TIMEZONE="Asia/Hong_Kong"
KEYMAP="us"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
# HARDWARE
# MODULES: Modules to load at boot-up. Blacklisting is no longer supported.
# Replace every !module by an entry as on the following line in a file in
# /etc/modprobe.d:
# blacklist module
# See "man modprobe.conf" for details.
MOD_AUTOLOAD="yes"
MODULES=(acpi-cpufreq fuse tp_smapi vboxdrv e1000e)
# Udev settle timeout (default to 30)
UDEV_TIMEOUT=30
# Scan for FakeRAID (dmraid) Volumes at startup
USEDMRAID="no"
# Scan for BTRFS volumes at startup
USEBTRFS="no"
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# NETWORKING
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
HOSTNAME="antony-tp"
# Use 'ip addr' or 'ls /sys/class/net/' to see all available interfaces.
# Wired network setup
# - interface: name of device (required)
# - address: IP address (leave blank for DHCP)
# - netmask: subnet mask (ignored for DHCP) (optional, defaults to 255.255.255.0)
# - broadcast: broadcast address (ignored for DHCP) (optional)
# - gateway: default route (ignored for DHCP)
# Static IP example
# interface=eth0
# address=192.168.0.2
# netmask=255.255.255.0
# broadcast=192.168.0.255
# gateway=192.168.0.1
# DHCP example
# interface=eth0
# address=
# netmask=
# gateway=
# Setting this to "yes" will skip network shutdown.
# This is required if your root device is on NFS.
NETWORK_PERSIST="yes"
# Enable these netcfg profiles at boot-up. These are useful if you happen to
# need more advanced network features than the simple network service
# supports, such as multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network.d
# This requires the netcfg package
#NETWORKS=(main)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
# If something other takes care of your hardware clock (ntpd, dual-boot...)
# you should disable 'hwclock' here.
DAEMONS=(!hwclock syslog-ng dbus !network !dhcpcd rpcbind acpid @wicd nfs-common netfs @crond cups @laptop-mode @alsa @sensors ntpd @slim bluetooth)
Here is a segment of my dmesg
[ 2.759302] e1000e: Intel(R) PRO/1000 Network Driver - 1.5.1-k
[ 2.759304] e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
[ 2.759338] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 2.759348] e1000e 0000:00:19.0: setting latency timer to 64
[ 2.759467] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
[ 2.766107] tpm_tis 00:0a: 1.2 TPM (device-id 0x0, rev-id 78)
[ 2.766808] ACPI: AC Adapter [AC] (on-line)
[ 2.776492] wmi: Mapper loaded
[ 2.777212] mei: module is from the staging directory, the quality is unknown, you have been warned.
[ 2.777781] thermal LNXTHERM:00: registered as thermal_zone0
[ 2.777783] ACPI: Thermal Zone [THM0] (66 C)
[ 2.778291] iTCO_vendor_support: vendor-support=0
[ 2.780137] ACPI: Battery Slot [BAT0] (battery present)
[ 2.780958] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 2.781462] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 2.781547] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[ 2.781919] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 2.783139] cfg80211: Calling CRDA to update world regulatory domain
[ 2.789182] [drm] Initialized drm 1.1.0 20060810
[ 2.789538] hub 4-1:1.0: USB hub found
[ 2.789616] hub 4-1:1.0: 8 ports detected
[ 2.792925] Non-volatile memory driver v1.3
[ 2.795877] thinkpad_acpi: ThinkPad ACPI Extras v0.24
[ 2.795879] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 2.795881] thinkpad_acpi: ThinkPad BIOS 8DET54WW (1.24 ), EC unknown
[ 2.795882] thinkpad_acpi: Lenovo ThinkPad X220, model 4290NL5
[ 2.797236] thinkpad_acpi: detected a 8-level brightness capable ThinkPad
[ 2.797352] thinkpad_acpi: radio switch found; radios are enabled
[ 2.797466] thinkpad_acpi: possible tablet mode switch found; ThinkPad in laptop mode
[ 2.799752] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
[ 2.800067] Registered led device: tpacpi::thinklight
[ 2.800091] Registered led device: tpacpi::power
[ 2.800106] Registered led device: tpacpi::standby
[ 2.800120] Registered led device: tpacpi::thinkvantage
[ 2.800192] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[ 2.800254] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[ 2.801077] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input5
[ 2.801162] sdhci: Secure Digital Host Controller Interface driver
[ 2.801164] sdhci: Copyright(c) Pierre Ossman
[ 2.801707] Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
[ 2.801709] Copyright(c) 2003-2011 Intel Corporation
[ 2.801744] iwlwifi 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 2.801753] iwlwifi 0000:03:00.0: setting latency timer to 64
[ 2.801789] iwlwifi 0000:03:00.0: pci_resource_len = 0x00002000
[ 2.801791] iwlwifi 0000:03:00.0: pci_resource_base = ffffc90005abc000
[ 2.801793] iwlwifi 0000:03:00.0: HW Revision ID = 0x34
[ 2.801877] iwlwifi 0000:03:00.0: irq 49 for MSI/MSI-X
[ 2.801913] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Advanced-N 6205 AGN, REV=0xB0
[ 2.801962] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
[ 2.802045] sdhci-pci 0000:0d:00.0: SDHCI controller found [1180:e822] (rev 7)
[ 2.802067] sdhci-pci 0000:0d:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.802107] sdhci-pci 0000:0d:00.0: setting latency timer to 64
[ 2.802118] _regulator_get: 0000:0d:00.0 supply vmmc not found, using dummy regulator
[ 2.802188] Registered led device: mmc0::
[ 2.803329] mmc0: SDHCI controller on PCI [0000:0d:00.0] using DMA
[ 2.815226] iwlwifi 0000:03:00.0: device EEPROM VER=0x715, CALIB=0x6
[ 2.815229] iwlwifi 0000:03:00.0: Device SKU: 0X1f0
[ 2.815231] iwlwifi 0000:03:00.0: Valid Tx ant: 0X3, Valid Rx ant: 0X3
[ 2.815247] iwlwifi 0000:03:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
[ 2.845674] iwlwifi 0000:03:00.0: loaded firmware version 17.168.5.3 build 42301
[ 2.845820] Registered led device: phy0-led
[ 2.850630] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 2.862431] usb 1-1.2: new low-speed USB device number 3 using ehci_hcd
[ 2.943648] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) f0:de:f1:92:77:26
[ 2.943651] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
[ 2.943712] e1000e 0000:00:19.0: eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF
[ 2.943734] mei 0000:00:16.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.943739] mei 0000:00:16.0: setting latency timer to 64
[ 2.943817] mei 0000:00:16.0: irq 50 for MSI/MSI-X
[ 2.944502] agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset
[ 2.945021] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 2.946341] watchdog: INTCAMT: cannot register miscdev on minor=130 (err=-16).
[ 2.946452] watchdog: error registering /dev/watchdog (err=-16).
[ 2.946523] mei: unable to register watchdog device.
[ 2.946598] agpgart-intel 0000:00:00.0: detected 65536K stolen memory
[ 2.946692] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[ 2.946734] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.948359] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 2.948422] snd_hda_intel 0000:00:1b.0: irq 51 for MSI/MSI-X
[ 2.948444] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 3.022245] usb 1-1.3: new full-speed USB device number 4 using ehci_hcd
[ 3.172080] usb 1-1.4: new full-speed USB device number 5 using ehci_hcd
[ 3.274597] Bluetooth: Core ver 2.16
[ 3.274611] NET: Registered protocol family 31
[ 3.274612] Bluetooth: HCI device and connection manager initialized
[ 3.274614] Bluetooth: HCI socket layer initialized
[ 3.274614] Bluetooth: L2CAP socket layer initialized
[ 3.274618] Bluetooth: SCO socket layer initialized
[ 3.275535] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 3.276006] usbcore: registered new interface driver btusb
[ 3.338454] usb 1-1.6: new high-speed USB device number 6 using ehci_hcd
[ 3.444567] Linux media interface: v0.10
[ 3.447387] Linux video capture interface: v2.00
[ 3.448573] input: Logitech Trackball as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input6
[ 3.448671] generic-usb 0003:046D:C404.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech Trackball] on usb-0000:00:1a.0-1.2/input0
[ 3.448690] usbcore: registered new interface driver usbhid
[ 3.448691] usbhid: USB HID core driver
[ 3.449136] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b217)
[ 3.450945] input: Integrated Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input7
[ 3.450987] usbcore: registered new interface driver uvcvideo
[ 3.450988] USB Video Class driver (1.1.1)
[ 3.484049] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
[ 3.491137] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 3.491298] HDMI status: Codec=3 Pin=6 Presence_Detect=0 ELD_Valid=0
[ 3.491486] HDMI status: Codec=3 Pin=7 Presence_Detect=0 ELD_Valid=0
[ 3.491637] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 3.491709] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 3.491765] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 3.492050] i915 0000:00:02.0: power state changed by ACPI to D0
[ 3.492053] i915 0000:00:02.0: power state changed by ACPI to D0
[ 3.492059] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.492062] i915 0000:00:02.0: setting latency timer to 64
[ 3.538056] mtrr: no more MTRRs available
[ 3.538058] [drm] MTRR allocation failed. Graphics performance may suffer.
[ 3.538266] i915 0000:00:02.0: irq 52 for MSI/MSI-X
[ 3.538270] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 3.538271] [drm] Driver supports precise vblank timestamp query.
[ 3.538292] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 3.664501] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.0, id: 0x1e2b1, caps: 0xd001a3/0x940300/0x120c00
[ 3.664518] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[ 3.716317] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input12
[ 4.407165] fbcon: inteldrmfb (fb0) is primary device
[ 4.575259] Console: switching to colour frame buffer device 170x48
[ 4.577042] fb0: inteldrmfb frame buffer device
[ 4.577043] drm: registered panic notifier
[ 4.607860] acpi device:01: registered as cooling_device4
[ 4.607985] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input13
[ 4.608039] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 4.608122] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 4.757243] EXT4-fs (sda3): re-mounted. Opts: discard
[ 4.765917] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: discard
[ 4.776777] Adding 262140k swap on /dev/sda2. Priority:-1 extents:1 across:262140k SS
[ 5.099467] NET: Registered protocol family 10
[ 6.048650] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 6.098038] Bluetooth: RFCOMM TTY layer initialized
[ 6.098055] Bluetooth: RFCOMM socket layer initialized
[ 6.098057] Bluetooth: RFCOMM ver 1.11
[ 6.278766] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
[ 6.278893] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[ 6.568639] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
[ 6.568775] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[ 6.684082] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 7.176563] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
[ 7.226662] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
[ 7.227110] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 10.229345] IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 10.490618] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input14
[ 10.817814] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[ 10.819315] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 11.186166] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
[ 11.186292] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[ 11.313367] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 11.665342] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
[ 11.717591] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
[ 11.718042] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 11.964795] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
[ 12.017213] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
[ 12.017720] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 13.811264] EXT4-fs (sda3): re-mounted. Opts: discard,commit=0
[ 13.826031] EXT4-fs (sda4): re-mounted. Opts: discard,commit=0
[ 15.178905] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[ 15.180472] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 25.663056] eth0: no IPv6 routers present
Any hint for tracing the root of this problem? Thank you very much!Hi ...
If you have moved the Safari application from the Applications folder, move it back.
As far as the cache goes, there's a work around for that when you can't empty the Safari cache from the menu bar.
Go to ~/Library/Caches/com.aple.Safari.Cache.db. Move the Cache.db file to the Trash.
Try Safari.
Mac OS X (10.7.2) < from your profile
If that is corrrect, you need to update your system software. Click your Apple menu icon top left in your screen. From the drop down menu click Software
Update ...
~ (Tilde) character represents the Home folder.
For Lion v10.7x: To find the Home folder in OS X Lion, open the Finder, hold the Option key, and choose Go > Library -
I tries to backed up and storage on iCloud but its just shows down below "Estimating time remaining" but theres no time remaining !!! And i connect to the Wifi already and i buy a storage capacity !!! But its not backing so what should i do in that case !!!?
Welcome to the Apple Community.
First check that your device is correctly connected to the wifi/internet (settings > wifi)
If your back up continually fails, you might try turning off back up on your mobile device (settings > iCloud > storage & backup) and then deleting the backup file from iCloud by swiping the backup file on the mobile device (settings > iCloud > storage & backup > manage…) and then turning back up on again.
If this doesn't help, try turning off some items for back up in a pattern to try to establish if your problem is being caused by specific data on your device.
Being able to back up to the cloud can be very useful, especially if you don't have access to a computer or have infrequent access to one, however unless you specifically need to use iCloud for back up, you will find backing up to iTunes significantly more convenient and possibly more reliable. -
My mobile phone is always automatically shut down at the time of the photo.
My mobile phone is always automatically shut down at the time of the photo.
Plug the device into a wall outlet and leave it for about 20 minutes. If it has not powered on at that point try a reset by pressing and holding the home and power buttons for about 15 seconds until the white Apple logo appears.
-
Scheduling Time in process order
Dear All
While creating process order system is not picking scheduling time as per maintained in recipe because of this capacity is not being load on WC & showing zero reqmnt. Whreas date are properly calculating as per inhouse time maintained. In OPUZ i had ticked both scheduling & capacity reqmnt.
In resource i had maintained all parameter in capacity & capacity is showing as 24 Hr. Scheduling & Capacity fromula had aslo maintain. Wht could be other reason for nt calculating time as per recipe.
Thanks & regardsRashid,
So is the dates getting populated correctly after scheduing function? If so then probably you current system design it to perform scheduling manually. You can use the "Production Scheduling profile" to perform this automatically. You need to assign a production scheduling profile defined for automatic Scheduling at the creation stage to you materil master "Work Scheduling" view
Regards,
Prasobh -
i have Adobe premiere 12 elements I have Buy it but this program is Corrupt. the are no sound on the time line. I have sound in my computer, this is no problem, I can listen every another things but NO Elements 12 OK I make ia video take down to the time line. Video is OK BUT NO sound I have makit in 2 veeks from monday to next vek here whit this very bad program so i go to garbags I think I buy a another program is be better and have a Sound. This is very bad I am not god to English. I Have a pro camera and I will have a god support but this is very bad. I is bad to English. But this Program I buy i think this is very Corrupt. The mast find a sound in this program. I cvan not understan if You can sell this very bad program Videoredigering and this program have nothing sound. This is crazy.
i have Adobe premiere 12 elements I have Buy it but this program is Corrupt. the are no sound on the time line. I have sound in my computer, this is no problem, I can listen every another things but NO Elements 12 OK I make ia video take down to the time line. Video is OK BUT NO sound I have makit in 2 veeks from monday to next vek here whit this very bad program so i go to garbags I think I buy a another program is be better and have a Sound. This is very bad I am not god to English. I Have a pro camera and I will have a god support but this is very bad. I is bad to English. But this Program I buy i think this is very Corrupt. The mast find a sound in this program. I cvan not understan if You can sell this very bad program Videoredigering and this program have nothing sound. This is crazy.
-
How can we change the Reports scheduled Time in OBIEE 11.1.1.5
Hello Friends,
I have scheduled BI Publisher reports for FTP, but now I want to change the scheduling time or cancel the scheduled reports.
But I didn't get any option for that. If any body know, please let me know.
Thanks & regards,
PradipHi Pradip,
Go to the report location. You will find options open, Edit, schedule etc based on previliges. Click on schedule.
then you will find options, General, Output, schedule Notification. Under Scgedule tab you can change the scheduled time of the report.
Thanks, -
When i editing in the piano roll windows, after 10 at 20 editing steps my logic pro 9 crashed down. Every time. Is this a bug?
Maybe find a local who can translate for you. I don't know what to tell you for dealing in another country for service on your computer.
I can offer you something you can do if you want to give it a try. You'll need a backup of your data in your Home folder because you need to erase the drive. You'll also need a solid, preferably fast, internet connection.
Install or Reinstall Lion/Mountain Lion from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your startup volume (usually Macintosh HD) from the
left side list. Click on the Erase tab in the DU main window.
3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on
the Security button and set the Zero Data option to one-pass. Click on
the Erase button and wait until the process has completed.
4. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Install button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
because it is three times faster than wireless. -
Automatically turn filters on or off at a scheduled time
Hi there,
Is it possible for a Blackberry (I have a 9780) to automatically turn email filters on or off at a scheduled time during night?
This is to allow alerting notification start without me having to manually do it. (I'll be asleep )
(I want to turn on alerting at say, 5am but not wake up until say 7am)
ThanksHi Everyone,
I was wondering if anyone can help me figure out how
to turn on and off the XRAID at a specific time. My
electrical bills are crazy. Is there a way to get
this done?
Thanks,
Jorge
I think turning the RAID on and off periodically is a bad idea. But if you really really really want to do this ....
Connect the xserve raid to a 'metered power strip such as those provide by APC. you can telnet to the power strip via the network to power off individual port)
write a script (run on the xserve or powermac that the RAID is connected to (direct or via switch)
0) quit application (issue a quit command or if the application have a stop command (example databse can be stopped)
1) unmount volume (must)
2) issue a telnet command via expect script to control the power strip to power off the array.
If you have java cli access to the array (see alienraid.org).(I have not tried this before.)
http://alienraid.org/article.php?story=xserveraidtools12&query=command
You can issue a command to execute the RAID admin shutdown command.
Put the master script into a unix cron job.
macbook pro Mac OS X (10.4.7) typing this on a white box pc -
Scheduled time has been changing with out specifing
i have submitted a job using dbms_job.submit(v_JobNum,v_command,null,null);.
but when the scheduled time is reached, the job is not getting execute,instead it's time has been changed to next 5 min for every time, which leads the job should not got execute.
what will i do??
Thanks & Regards,
Rajesh.PI suspect that your job is failing.
Query user_jobs for the failures column. If this is non-zero, then you know your job is failing, and being retried.
I forget what the limit is, but basically the job will be retried several times, and when it reaches the limit of retry-attempts, it will mark the job as broken (see the broken column).
If this is the case for you, you need to examine what the job is running to see why it might be failing. -
this morning i turned my music on and the volume wouldn't go down, and every time i tried to turn it down it just kept going back up. If i were to hold the volume slide down while playing the music it would make a sort of chopping sound in the music. I finally restarted it and it fixed it but i was wondering what the problem was.
Did you already try to reset the ipod by holding the sleep and home button until the Apple logo comes back again?
If this does not work, restore "as new device" without using the latest backup, in case it contains corrupt files.
How to back up your data and set up as a new device
Maybe you are looking for
-
I have three different e-mail addresses, and need to receive the incoming e-mails from the three sources into my iPhone (it's presently receiving msgs from only one of them). How do I enable my iPhone to do it? Tks in advance.
-
I have problem with the following code: class Week10Q4 static PrintWriter out=new PrintWriter(System.out,true); static boolean receivingInput(int anInput)throws NegativeNumberException out.println("receiveing answer "+anInput);
-
I want to take an existing DVD created with a standalone burner, and replace the generic Sony menu with a custom menu I create in Encore 5. I alsmo need to change the chapter stops. I'd like to be able to import the VOB files from the DVD so I don't
-
Do new macs not have a dvd drive
I think my emac has died. When. I switch it on i get a blue screen with a sign in to apple but the mouse does not work. the only way I can switch it off is by the main wall socket. It is a 2003 running ox10.4 guess its time to bite the bullet and
-
How do i install ios 4.0 on my 3rd generation i pod touch
how do i install ios 4.0 on my 3rd generation i pod touch?