VPN up/down every 2minutes

Hi everybody,
I've got a problem with a VPN. The VPN is connected, but every 2 minutes, it goes down.
I have tried a lot of things like keepalive,... but no solution.
Can you give some help, please ?
Config :
service tcp-keepalives-in
service tcp-keepalives-out
service timestamps debug datetime localtime
service timestamps log datetime localtime
ip source-route
crypto isakmp policy 1
encr 3des
hash md5
authentication pre-share
crypto isakmp key all_to_signy address x.x.x.x
crypto ipsec transform-set SIGNY esp-3des esp-sha-hmac
crypto ipsec profile MYPROFIL
set transform-set SIGNY
crypto map HASABLUE 10 ipsec-isakmp
set peer x.x.x.x
set peer x.x.x.x
set transform-set SIGNY
set pfs group2
match address 101
interface Tunnel0
ip unnumbered Vlan1
tunnel source Ethernet0
tunnel mode ipsec ipv4
tunnel destination x.x.x.x
tunnel protection ipsec profile MYPROFIL
interface Tunnel1
ip unnumbered Vlan1
tunnel source Cellular0
tunnel mode ipsec ipv4
tunnel destination x.x.x.x
tunnel protection ipsec profile MYPROFIL
interface Ethernet0
ip dhcp client update dns server both
ip address dhcp
ip nat outside
ip virtual-reassembly in
shutdown
crypto map HASABLUE
interface Cellular0
ip address negotiated
ip nat outside
ip virtual-reassembly in
encapsulation ppp
dialer in-band
dialer idle-timeout 0
dialer string gsm
dialer-group 1
async mode interactive
ppp chap hostname testprofil
ppp chap password 0 temporary
crypto map HASABLUE
interface Vlan1
ip address 192.168.100.1 255.255.255.0
ip nat inside
ip virtual-reassembly in
ip dns server
ip nat inside source list 1 interface Cellular0 overload
ip nat inside source list 2 interface Ethernet0 overload
ip route 0.0.0.0 0.0.0.0 Cellular0
ip route 192.168.222.0 255.255.255.0 Tunnel0
ip route 192.168.222.0 255.255.255.0 Tunnel1

If the VPN you are trying to build is like EzVPN or site to site VPN, then there is an option in the group-policy that you can configure "vpn-access-hours" -
In the case of EzVPN if the client is trying to establish a tunnel to the head end server, then you can specify the access-hours which will allow the tunnel to be established & torn-down at the configured time.
The rest of the time, the tunnel will try to get established but it will fail since the access-hours will not match.
All this will work only if the head end side is running version 7.x code.
Hope this sheds some light.
Rate this post, if it helps.
Cheers
Gilbert

Similar Messages

After I update my iMac 27" to 10.7.1, the vpn is disconect every 30-40 minutes... -.- :@ What can I do about it?, After I update my iMac 27" to 10.7.1, the vpn is disconect every 30-40 minutes... -.- :@ What can I do about it?

After I update my iMac 27" to 10.7.1, the vpn is disconect every 30-40 minutes... -.- :@ What can I do about it?, After I update my iMac 27" to 10.7.1, the vpn is disconect every 30-40 minutes... -.- :@ What can I do about it?

jdotmattinson is correct! I have the same issue.
It is a router/ISP issue. Tried the software update drop down for 10.7.4, failed. Tried to download 10.7.4 Combo Client update, invalid checksum. Tried to download 10.7.3 Combo client update, invalid checksum.
Went over to Win7 Dell laptop, downloaded 10.7.4 Combo update, transferred to MacMini via USB drive. Invalid checksum. WHICH led me to diagnose it wasn't my Mac, but Apple's servers or my ISP/Router.
Went to work, downloaded on XP, put on USB drive, brought it home, copied, installed just fine!
Did a hard factory reset on Motorola Surfboard SBG5560, invalid checksum again.
Going to buy a new router tonight and test it again with dowloading 10.7.4 Combo update. Will keep you posted to see if that fixes it.
Btw, if a new one doesn't fix it then it's my Comcast ISP service that is messing it up. Which is going to make me cry....check out this link... be afraid, be VERY afraid if this is the problem/solution.
https://discussions.apple.com/thread/2585612?start=75&tstart=0

I have Adobe Photoshop CS2 and it closes down every time I open it.

I have Adobe Photoshop CS2 and it closes down every time I open it with the following error: "Photoshop Quit Unexpectedly". Is there anything I can do to troubleshoot this?

The first question is have you used this version on this computer with the operating system you have now. The issue might be (if you are on a Mac) that CS2 was a Power PC application and you have upgraded to a new computer with an Intel processor. CS2 will not work on an Intel processor with system (I think) OSX.6 or greater.
If you have used this release on this computer with the same OS, than try deleting the preferences by holding down the Comand/Control-Option-Shift keys when starting the application. You will get a message asking if you want to delete the preferences, say yes.
Let me know if any of these work.

Recent freezing and shutting down every down 10-15 minutes and hard to log in to internet very slow

My son has 2009 Macbook white version and recently (last week or so) freezing all the time, cannot log on to internet, and shuts down every 10-15 minutes. Is there a download (free hopefully to clean it up for any spyware or maleware). He is a student and very busy in University and cannot be without the computer?

He will need something to back up onto like an external hard drive. The disks are necessary if the hard drive needs to be repaired, you can't repair the boot volume so you need to start up from an install disc and run Disk Utility from there. When you talk to him have him resettle SMC and pram, sometimes unexpected shutdowns can be corrected that way. The freezing is another issue, I'm concerned with the health of his hard drive. Another thing to ask when you talk to him is how much total space and how much free space does his hard drive have?
To reset the SMC
MacBook and MacBook Pro
Laptops with a battery you can remove
Shut down the computer.
Disconnect the MagSafe power adapter from the computer, if it's connected.
Remove the battery.
Press and hold the power button for 5 seconds.
Release the power button.
Reconnect the battery and MagSafe power adapter.
Press the power button to turn on the computer.
Newer Mac portables with a battery you don't remove
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.
Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.
Resetting NVRAM / PRAM
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.

Is it possible to move the "Add.." button at contacts on top of the custom label list? I add a lot of custom lables and tired of scrolling down every time.

Is it possible to move the "Add.." button at contacts on top of the custom label list? I add a lot of custom lables and tired of scrolling down every time.

No way to move any buttons in iOS devices.

Aperture 3 shuts down every time I try to use it after only using it for one minute. Aperture closes then a pop up screen asks if I want to reopen Aperture. If somrone at Aperture didn't keep pushing a stop button for it to close,it wouldn't need to ask t

Aperture 3 shuts down every time I try to use it after only using it for one minute. Aperture closes then a pop up screen asks if I want to reopen Aperture. If somrone at Aperture didn't keep pushing a stop button for it to close,Apple wouldn't need to ask the stupid question"Do you want to reopen Aperture?" to begin with. Anyone out there having the same annoying problem?? I like Aperture or used to anyway,but if this nonsense continues, I will be forced to buy some other editor besides "No hanging fruit - Adobe photoshop CS5" or "I don't like you so I'm shutting down - Aperture".

Hello,
sorry to hear about your troubles, but we will need to have more technical information about your problem to be able to help you:
There may be several reasons that can cause Aperture to crash on start up:
You may have imported an image (or video) in an encoding that Aperture does not support, or that is larger than 2 GB, or that is corrupted and Aperture cannot process it
Your Aperture Library or Preferences may have been corrupted
Or you are having a system wide problem with your machine.
Or you may simple be running out of disk space.
It would help, if you could post the crash log from your last crash. Also, more details on your Aperture Library: Is it managed or references? how large is it? Is it on your system drive or on an external drive?
What have you done, shortly before the trouble started? Have you imported new images or videos? Did you install any plug-ins or any new software, lile Final Cut?
Try, if you can get Aperture to launch, if you defer the generation of Previews: Hold down the SHIFT-key immediately after you start Aperture to prevent preview generation for that session. If a damaged image in your library is preventing normal opening, this may allow you to start Aperture. If this succeeds, try to identify the broken image or video among the images you recently imported and remove it from the library.
Regards
Léonie
Don't you think your user name is a little bit tactless in an Apple provided forum?

I am working on Mac OS 10.7.2 using Quark 9.I. The program keeps shutting down every time I try to work on a file I created on my MacBook Pro using Quark 7.01. Help!

I am working on Mac OS 10.7.2 using Quark 9.I. The program keeps shutting down every time I try to work on a file I created on my MacBook Pro using Quark 7.01. Help!

http://support.quark.com/SSP/Login.aspx?ReturnUrl=/ssp/default.aspx

Shutting down every 30"

I have been using my Mac Air with Spotify and connecting it to the stereo system. It started shutting down approximately every 30 minutes. When it does it even closes all the programs. I think that I have all the settings so that it shouldn't shut down with the power cord connected? I have the Energy Saver setting on NEVER. Is there somthing I'm missing?

I've had FIOS for about two years and this just started happeneing to my HD set top box. I've gotten three different answers for when to expect delivery of the new box. POOOOOORRRR customer service! I don't expect this to resolve the issue. If it doesn't, I will demand that the outside box be replaced next. I also have three standard set top boxes in the house that are not affected. Verizon seems to be skirting the issue rather than actually trying to solve it. My box shuts down every 5-10 minutes now. And often gets stuck in a restart cycle and won't come back up.

My imac (intel core i5, OS 10.10.1) shuts down every night and will not "wake up" next morning -- it never used to do that -- if I hold down the start button more than twice for many seconds, then it will finally boot up and works fine all day – I've

my imac (intel core i5, OS 10.10.1) shuts down every night and will not "wake up" next morning -- it never used to do that -- if I hold down the start button more than twice for many seconds, then it will finally boot up and works fine all day – I’ve tried shutting it down and unplugging it, and that does not work -- I’ve run disk utilities checked permissions, and run anti-virus and get no adverse results – I cannot figure out what is different that causes this problem

From previous experience 3 indicates a shutdown initiated by the SMC (System Management Controller) — hardware responsible for many low-level functions including power, sleep, lights, and fan activity.
Try resetting it:
Power or other problems related to unexpected system sleep, shutdown, lights or fans call for an SMC reset. Read all the steps.
Before Resetting the SMC
Try each of the following steps in this order before you reset the SMC. Test the issue after completing each troubleshooting step to determine if the issue still occurs.
Press Command + Option + Escape to force quit any application that is not responding.
Put your Mac to sleep by choosing the Apple () menu from the upper-left menu bar and then choosing Sleep. Wake the computer after it has gone to sleep.
Restart your Mac by choosing the Apple () menu from the upper-left menu bar and then choosing Restart.
Shut down your Mac by choosing the Apple () menu from the upper-left menu bar and then choosing Shut Down.
Resetting the SMC for Mac Pro, Intel-based iMac, Intel-based Mac mini, or Intel-based Xserve
Shut down the computer.
Unplug the computer's power cord.
Wait fifteen seconds.
Attach the computer's power cord.
Wait five seconds, then press the power button to turn on the computer.

TS1363 Why does my I-Tunes keep shutting down every time I try to go to the I-Tunes store?

Why does my I-Tunes keep shutting down every time I try to go to the I-Tunes store?

Hi sidro1!
Here is an article that will help you troubleshoot this issue with your iTunes application:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
Thanks for using the Apple Support Communities. Have a good one!
-Braden

I made a imovie project and it has many transitions and stills and music soundtrack and rolling comments and text embedded in it. . I try and export it and it wont prepare the project beyond 16 minutes and shuts down every time. I have tried exporting it

i made a imovie project and it has many transitions and stills and music soundtrack and rolling comments and text embedded in it. . I try and export it and it wont prepare the project beyond 16 minutes and shuts down every time. I have tried exporting it to movies idvd itunes,and quicktime in a variety of sizes although not the smallest as I want to watch it on my computer and tv. All videos were recorded on an iphone. Apple store couldn't help me and suggested I redo part of the project. It is a really good project and would take hours to redo it . I just want to export it. Can any one please help???

Hi
Trying to get a picture of it.
• Free Space on Your Start-Up (Mac OS) Hard Disk. How Much ?
• Any other hard disks connected ?
• If so - Formatted as ?
Yours Bengt W

Safari crashes and shuts down every time I visit Grays Online. Anyone else with this problem?

Safari crashes and shuts down every time I visit Grays Online. Site usually flicks off in under a minute. Anyone else with this problem?

The website may need more memory than you have available if you are running iOS 5.1.1 on the original iPad. Try some basic troubleshooting steps. Maybe quitting all apps might be the best thing to try.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Quit ALL apps completely and restart the iPad. Go to the home screen first by tapping the home button. Double tap the home button and the task bar will appear with all of your recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar. Restart the iPad.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Go to Settings>Safari>Clear History, Cookies and Data. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.

Hello, my itunes app is getting shut down every time I want to open it. Ever since I downloaded the last two updates. I tryed repearing the file and uninstalling and installing several times. Still, is not working. I work with music and need my itunes

Hello, my itunes app is getting shut down every time I want to open it.
I don't know if it's related but ever since I downloaded the last two updates. I tryed reparing the file and uninstalling and installing several times. Still, is not working. I work with music and need my itunes up and running. Does anybody know how to fix this?

Hi Vero Torres,
If you are having issues with iTunes unexpectedly quitting on launch after on your Windows machine, you may find the troubleshooting steps outlined in the following article helpful:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
Regards,
- Brenden

MBP randomly shuts down every few hours (while plugged in)

MacBook Pro 15" Unibody Mid 2009
3.66 GHz Intel Core 2 Duo
Battery has been shoddy for a few years now. Only lasts about 15-30 minutes, but I just use the power cord.
Recently, the MBP (with cord plugged in) has been randomly shutting down every few hours. Immediately prior to shutting down, the status bar says the battery is fully charged, and I can unplug the cord, and there are no issues. When restart the computer, the battery will now say it's anywhere from 0-60% full.
The fact that the MBP shuts down even with the cord leads me to believe it's a logic board issue. If that's the case, what's the best option?
I figure I can either:
1. Replace just the battery and assume the healthy battery will weather any logic board lapses
2. Replace both the battery and the logic board
My local Apple Store said they could replace the logic board and battery for $300 total.
Is this necessary, and if so, is it worth buying the parts and trying to replace myself?

Yes, it's the flat-rate depot repair.
Ok, you've (mostly) answered my primary concern... I was wondering what would happen if it turns out this isn't a logic board issue, and if my $310 would go to waste. The thing is that, right now, my MBP appears to be working perfectly fine until it randomly shuts off, which can take a few hours. So, if the depot replaces the logic board + battery, the MBP appears to be working there (I can't imagine they'll test it for more than 5 minutes), the depot sends it back, and after hours of use, I still have the same issue, I'll be able to get a refund, yes?
If so, I'll probably just opt for this deal since replacement parts on eBay appear to be about the same price.
Thanks for the help!

My IPAD2 shuts down every 5 minutes,i have rebooted which didnt help...

my ipad 2 shuts down every 5 minutes,i have rebooted which doesnt work...very frustrating...

(A) Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.
(B) Try reset all settings
Settings>General>Reset>Reset All Settings
Note: Data will not be affected but settings for Wi-Fi, FaceTime, Message, Home Sharing will be reset

VPN up/down every 2minutes

Similar Messages

Maybe you are looking for