VPN (VPN Client or AnyConnect) fails to work after reboot

I have both an IPSec and an SSL VPN setup on my UC560. A user on the network is having issues establishing a VPN connection after rebooting their system.
This issue is only happening for one user on the network. Everyone else can connect perfectly fine after rebooting.
If I reinstall the VPN Client, it will work perfectly but I can't establish a connection once the computer is rebooted.
Any help is greatly appreciated.
Regards,
Sam

Similar Messages

Safari and app store fail to work after installing Maverick, what can I do?

Safari and app store fail to work after installing Maverick, what can I do?

Disk Utility (Applications - Utilities - Disk Utility) Repair Disk Permissions 2x. Then restart in Safe Mode and try both apps. Restart normally and post results.

Links to posts fail to work after I sign in

Before I sign in links to posts take me to the correct post but they fail to work after I sign in except for the special case of all posts on one page.
Does this happen for everybody or only those who had particular viewing preferences set up before the change to the latest forum software?

1. See my User Tip for some help: Some Solutions for Resetting
    Forgotten Security Questions: Apple Support Communities.
2. Here are two different but direct methods:
    a. Send Apple an email request at: Apple - Support - iTunes Store - Contact Us.
    b. Call Apple Support in your country: Customer Service: Contacting Apple for
        support and service.
3. For other queries about Apple ID see Frequently asked questions about Apple ID.
4. Rescue email address and how to reset Apple ID security questions
5. For online assistance use Apple - Support - Express Lane

Add-ons for android Firefox stop working after reboot

I have Firefox (ver. 21.0) installed on my Ramos W30 tablet running ICS (4.0.4) and my UG007 android stick running JB (4.1.1). They both have the same problem. After a reboot, the add-ons stop working. If you look at the add-ons, all the info which would show below "options" is gone. The only way I've been able to get them working again is to uninstall and reinstall the add-ons.
Any other way to fix this or prevent this from happening?

I only use 2 add-ons and it happens with both. I use adblock and tabstothefront. They both stop working after reboot.

Microsoft Office Apps fail to work after 10.6.7 update

Has anyone else's office apps failed to open after installing the OS update?
This is a brand new iMac only 5 days old using office 2011 with current updates.
Regards.
Mike.

After doing some Internet research and speaking with a second-level Apple tech, together we came up with the following solution.
Shut down, then start in safe-mode (hold shift key while re-starting). This will clear the font cache and re-build it. After doing this, when I started Word 2004 it took some time, but it showed the following fonts as corrupt: APC Courier, Bastion, Chicago TU, Courier TU, Latinski - and indicated they should be removed. Word then started up even though I just clicked OK to those messages and didn't remove them. I then re-started Word and it came up normally even though those fonts are still in the font book. By the way, I have downloaded the freeware app "Fontnuke-1.17," but haven't used it yet. There is a shareware app, "Fontfinagler," which may also be useful if safe mode doesn't work for you.
Branton
California
iMac 27 i7 with 250 GB SSD and 2 TB HD, 8 Gb RAM, 10.6.7, running Office 2004 for Mac

When I type symbol font appears on screen and browswers fail to work properly, reboot fixes, new keybord fixed it but it now back? driving me crazy..virus???

when I type symbol font appears on screen (Safari, Mail, Firefox text boxes) and browswers fail to work properly (click on reply and browser tries to download), reboot will temp fixe, new keybord fixed it but it now back? driving me crazy..virus??? When this starts up iMac does not work properly, odd things, start happening, like all my screens will dissappear and I have to click on app to 'show' then as quick as it started it will stop. Run MacPilot/Onyx, no change.
Wireless keyborad, 27" i7 chipset, 2.8 Ghz,12 Gigs RAM

when I type symbol font appears on screen (Safari, Mail, Firefox text boxes) and browswers fail to work properly (click on reply and browser tries to download), reboot will temp fixe, new keybord fixed it but it now back? driving me crazy..virus??? When this starts up iMac does not work properly, odd things, start happening, like all my screens will dissappear and I have to click on app to 'show' then as quick as it started it will stop. Run MacPilot/Onyx, no change.
Wireless keyborad, 27" i7 chipset, 2.8 Ghz,12 Gigs RAM

Mackbook internal keyboard fails to work after connecting external keyboard

I am using 13 inch alum macbook. The keyboard and trackpad has always been good.
Today, I tried to connect it to an external wireless logitech keyboard. Initially things do not work. Macbook does not recognize the external keyboard, and ask me to press the key on the right hand side of the left shift key. I tried to press a couple of times, and realized that the wireless keyboard has been running out of battery (has not been using that for a while). After I changed the new batteries, things are connected. However, I am not sure what key I pressed to answer macbook's question. Anyway, most keys work as expected (the 26 letters), but windows key on the external keyboard works as the apple command key. Then I downloaded the doublecommand software trying to remap keys.
Suddenly, I found that the external keyboard fails to work. I then try the internal keyboard, which fails as well. I then disconnect the external keyboard/mouse/display, and restart the machine. The trackpad works ok, but the internal keyboard still fails to work and thus I can not login (can not enter my password). Restarted a couple of times and the situation remains.
I tend to believe this is a software problem related to the mess up of the external keyboard. I tried to boot the machine using the original installation DVD and repaired the permissions of the hardisk. This did not fix the problem.
Please help. Thanks.

Problem solved.
It was the "doublecommand" software that I installed after connecting the external keyboard.
I called the Apple Technical Support. They helped me to boot into the safe mode (press Shift when turn on your computer until you see the login screen), and uninstall the software. Things are back to normal.
Apple technical support is very professional and knowledgeable. Thanks.

Setup of PRE & PSE V12 fails repeatedly even after reboot

I have a working installation of
Lightromm 5.3
Photoshop Elements V11
Premiere Elements V11
on a Windows 7 SP1 PC.
After purchasing a new licenes of PSE&PRE V12 succesfully downloaded and unpacked all files.
but Setup process fails even after reboot and reset to recovery point.

Hi,
Please try to install the software with a new administrator account. A new local administrative account can rule out network policies, corrupt profiles, and incorrectly setup administrative accounts: http://windows.microsoft.com/en-us/windows/create-user-account#create-user-account=windows -7
If the error continues to appear, restart Windows in modified mode and try to install Elements 12 again: http://helpx.adobe.com/x-productkb/global/restart-windows-modified-mode-windows.html
Regards
O´Neill_SG1

No apps work after rebooting phone this morning! Keeps asking me for apple id!

What happened!?!?
Now only apple apps work after i tried to reboot my phone. I get all the alerts, but can't use the apps! It keeps asking me for my apple id and failing. Anyone else?

Hi deweyduo,
Thank you for contributing to the Apple Support Communities.
It sounds like the applications that came with your iPhone are working, but other applications are asking you to log in with your Apple ID.
The iTunes Store services were experiencing issues on March 11, which may have affected your attempts. You can see the system status for Apple services at this link:
Apple - Support - System Status
Please try logging in again, if you haven't already. Feel free to reply and let us know if the issue continues.
All the best,
Jeremy

TS1365 Mu macbook wont work after reboot

My macbook won't work adter reboot. It is connected to a power source and i tried to reboot it (power button, command and S) but nothing happened. I tried several times but when it finally turns on, something fails and i had to force shutdown.
This has been going on for 2 days.

Fried Logic Board

Bonjour printer on Windows XP's stops working after reboot

Hello!
We have a AirPort extreme with an HP LaserJet 1010 connected to it. AirPort Extreme also serves as a gateway and DHCP server for the LAN.
Installing the printer on the local machines running Windows XP thru Bonjour works fine and all the documents are printed correctly. The printer is being installed as a single default printer on the system.
However, printer stops working after Windows XP machines are rebooted (the next morning). The installed printer keeps accumulating documents in queue and not spooling them to the printer. Issue could only be resolved by adding a new printer (which also works fine).
It seems not to be a connectivity problem as XP machines access the Internet thru the AirPort Extreme without any problem. Bonjour printer setup wizard also instantly sees the printer and is able to install it correctly. Mac's in the same network (iBook G3 and PowerBook G4 with Tiger) are not affected by the issue.
Any ideas on how the situation could be corrected?
- Baglan

Did anyone find a solution to this.
I have a HP Laserjet 1020 attached to my Airport. Using the Bonjour program on my Windows XP computer it found the printer attached, and added it to my printers. When I print all seems ok - it appears in the printer queue, then disappears as though its printed - but nothing comes out of the printer.
Any ideas? Thanks.
Message was edited by: jonny999

Disabling E-mail notifications not working after reboot

Hello. It seems that the mail notification and the mail count still persist even if I have it disabled on the settings after rebooting. I've checked the settings after reboot and it is still set as disabled (after following the guide), but the notifications still appear. Is this an bug on the on the app that needs to be fixed? Or am I missing something? Thanks.

I've had a number of problems with the Playbook not recognising the settings I've chosen. In this case, with disabling email notifications, it resets after each reboot.
I've found that if I go into my the Messages app, and then into Message Settings, it shows that alerts are set to be off (display message count, and display new message indicator). The fix for me is to enable alerts, go back to main app screen, then go back into settings and disable alerts once more. At that point the settings seem to stick. So whenever I reboot the playbook, I just have to do that and notifications will remain off until the next reboot.
Let us know if that works for you too. Maybe it will help the engineers figure out what's wrong.

Bluetooth USB Dongle stops working after reboot of 10.5.3

Hi,
I have been using my Mac Pro 2.66 with a USB Bluetooth dongle "Sitecom CN-521" and Apple's wireless keyboard (white one) and Mighty Mouse wireless.
All worked very fine together.
Then suddenly after rebooting 10.5.3, bluetooth is not available.
I first thought that the dongle was dead.
To find out, I tried the dongle on a PowerMac G4 733: it worked perfectly.
Then I thought it might be a hardware problem with the Mac Pro. To be sure, I installed the Vista drivers of the USB dongle on my Mac Pro (through VMware Fusion). It was recognized by Vista. I could even use my wireless keyboard in Vista, thanks to the dongle. But on 10.5.3, bluetooth was still dead and I could not use the keyboard.
It was a strange feeling to use my wireless keyboard on my Mac Pro, only in Vista and not in Leopard!!!!
So it is not a hardware problem (either dongle or Mac Pro). It is a software problem with 10.5.3.
I tried to reboot while unplugging all usb devices and then replugging them after startup is over: no improvement.
So basically, I think of 2 options:
1. either it is a 10.5.3 software problem.
2. either a clean install on my HD could clear this problem.
Does anyone of you has the same problem?
Any solutions?
Thanks in advance.

I answered this question on my own. I was able to utilize Pacifist and reinstalling the video card drivers and display profiles. Now everything works as it should.

[SOLVED] Printer not working after reboots

I recently built my won desktop running Arch. Every thing works fine except for printer. Printer is Brother MFC-290c. It is a Multinational printer (i.e Scanner and printer together).
Once I configure the printer it works fine until the next reboot. After reboot printer user/group changes to root:scanner.
# ls -l /dev/bus/usb/005/002
crw-rw-r-- 1 root scanner 189, 513 Jun 9 07:17 /dev/bus/usb/005/002
So after every reboot I need to do "lsusb" to look for Bus and Device ID for the printer and change its owner/group to root:lp. After this step is performed Printer works fine until next reboot.
$ lsusb
Bus 005 Device 002: ID 04f9:01fd Brother Industries, Ltd
Bus 005 Device 004: ID 045e:00f9 Microsoft Corp. Wireless Desktop Receiver 3.1
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 007 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 009 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 010 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 011 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
How can I make sure that whenever I plugin this printer its user and group is root:lp instead of root:scanner
Last edited by nik (2013-06-10 00:48:50)

SOLVED :D:D:D
Thanks Strike0. That was a push in right direction. After reading your reply, I decided to take a look at my udev rules. There was not one for my printer but there was one for the Scanner. I do not yet know how to read udev file, but sure enough it looked as if it was causing all problems . Renamed the rules file for the scanner to see if everything works fine in its absence. Rebooted, Printer and scanner are both working fine now.

Music app won't work after reboot

Hi,
touch Music icon on main screen on my flame phone doesn't work.
i have been updated B2G git version firmware daily,
after firmware update and flame phone first boot then touching Music icon works.
but reboot the phone or power-off-on the phone, Music icon doesn't work.
touching Music icon result simple reboot or nothing worked, blink screen and show home-screen again.

Hi sailfish009,
I'm sorry to hear that you are encountering problems with the Music application in your Flame device with Firefox OS.
I have not been able to reproduce this issue in any of my Flame builds with v2.0, v2.1, or v2.2.
Please reply to this message with the following information, so that we have a better idea of the environment you're running on your Flame:
* What is the model of your phone?
* What is the OS version and Build ID found in the Device Information page? Please visit [http://mzl.la/Gzz6Kp this link] if you need help finding the Build ID of your phone.
* Where did you download the image from, and how did you flash your device?
* Please provide the exact steps to reproduce the issue you are encountering.
* How often do you encounter this issue?
I would also suggest that you attempt to download and flash the Base Image 180 from the MDN website in the following link:
* [https://developer.mozilla.org/en-US/Firefox_OS/Developer_phone_guide/Flame#Updating_your_Flame%27s_software]
Please be sure to include as much detail as possible, including any websites that may exhibit this issue, and any error messages that you may be receiving, exactly as they appear. This will ensure that we will have all the information needed to investigate into this. Thank you for your help and we look forward to hearing from you!
- Ralph

VPN (VPN Client or AnyConnect) fails to work after reboot

Similar Messages

Maybe you are looking for