VPN works 1-2 times then stops, if I reboot router, it works again
I have a Mac Pro Leopard Server sitting behind my AP Extreme with VPN ports forwarded. The router will let me connect from the internet to the server one or two times using VPN without any problems but then the next time I try to log in, the router will not let any VPN traffic flow to the server (nothing shows up in server's VPN logs, even though internet still works). If I reboot the router, I can connect again using VPN but if I disconnect and reconnect a couple times, there will always come a time when I cannot reconnect until I reboot the router again. Rinse and repeat.
Nothing seems to be showing up in the router's logs either, although it keeps repeating that "administrative access denied to:" followed by my server's local IP address. But I notice that it will say this even during the times I can connect.
What is going on?
Message was edited by: johnthomjr
have you fixed this? I am having similar problem on one or our servers (10.5) behind a Cisco router. I never have this problem with our servers (10.4) behind APE's. I have gone so far as to make this particular server the DMZ host for the LAN and it still gets no traffic ( in the VPN logs) unless the router is restarted. I have no solution, just adding my own special twist on the problem.
Similar Messages
-
I followed the instructions for changing font colors and it worked a few times then stopped working.
latest version of Firefox
What instructions are you referring to and why do you want to change the colors?
*https://support.mozilla.org/kb/Websites+look+wrong
*https://support.mozilla.org/kb/Website+colors+are+wrong
*https://support.mozilla.org/kb/Changing+fonts+and+colors -
Airport express works for 1 minute then stops
I came back from vacation. restarted my mac mini + airport express + ...
Internet worked for 1 minute then stopped. I unplugged cable modem + airport. Restarted them. Internet worked for 1 minute the stopped. After it stopped working the light on the airport express stayed green. Computer was still connected with a strong signal.
I plugged the ethernet cable into mac and internet worked fine without issue.
I did a hard reset of airport express and had same issue as above.
Is my airport express shot? Why does it only work for 1 minute or so and then stop?After waiting a few days, plugged in airport to try one more time and it now works fine. Not sure what the problem was, but it has had no issues since letting it stay unplugged for a few days.
-
# Question
For some reason, I can not delete bookmarks. I did one at a time, then tried 5 or 6 and it worked once then no more. I then tried 1 at a time and it worked once the no more. Why is this happening? This is a brand new computer (Win7) and FF just loaded about 3 hours ago. Do not know how the bookmarks even got in there. Some were ok, but no order and some that were never bookmarks. Looks like FF tried to import some BM's from the Virtual XP installed, but did not get it any where near right. I need to completely delete all of them and install from a saved .html file.Well, I did not see the exact problem that I was having listed in the articles, BUT the problem is solved for now.
I opened FF and the Bookmarks to Organize again. I deleted all of the folders and entries, ONE AT A TIME, AND IT WORKED. Evidently, for what ever reason, FF did not like "Batch" deletes of ANY amount greater than 1 and the HANG UP would occur.
Deleting one at a time then importing the good .html from a good file, loaded the wanted Bookmarks. Yea -
My ipod shuffle is not harging. It blinks orange 3 times then stops when I install it
My ipod shuffle is not charging. It blinks orange 3 times then stops when I install it.
According to this article, that means the Shuffle's buttons are disabled.
iPod shuffle (2nd generation): Understanding status light behavior
To re-enable the buttons, press and hold the Play/Pause button for about 3 seconds or until the status light blinks green three times.
B-rock -
Why is my computer beeping 3 times then stopping then 3 times again and how do i fix it??
my computer is beeping 3 times then stopping then beeping again. How do I fix it?
Hello! This is the first time I've had a major Problem with my notebook, I hope somebody can help me.
My MacBook Pro with Snowleopard operating system, processor 2.4 GHZ Intel Core I5, apple original RAM 4GB 1067MHz DDR3 is a little bit more than 2 years old.
It started this week as my computer didn´t react to any Keyboard command and the mouse cursor was standing still. So I turn it off and soon on, then it started beeping 3 times and the screen was black. I turn it off, took the ram out and inserted it again, I clean the fans it was very dusty inside.
The next time my Mac was running as usual for about 10 minutes, suddenly the screen faded into grey, I could still see the whole background. There was a message from my computer that I had to turn the computer off with the power Button. Then the same happend again.
And today I turn it on but didn´t check on it for a while, it went into Stand by mode and I couldn´t wake it up, so I had to turn it off again.
As I turn the computer on I press cmd+v and made a screenshot of information that might contain my problem. I don´t understand what is telling me, maybe someone had the same problem and could solve it.
Thank you very much in advance,
Best
Rebecca -
SAP disp+work.exe started but then stopped
i am attaching 2 files .. dev_disp, dev_w0
SAP stops running after few seconds
please help me with that regards
Thanks in Advance
trc file: "dev_w0", trc level: 1, release: "720"
* ACTIVE TRACE LEVEL 1
* ACTIVE TRACE COMPONENTS all, MJ
M sysno 00
M sid SLM
M systemid 390 (AMD/Intel x86_64 with Linux)
M relno 7200
M patchlevel 0
M patchno 201
M intno 20020600
M make single threaded, Unicode, 64 bit, optimized
M profile /usr/sap/SLM/SYS/profile/SLM_DVEBMGS00_haidrislm
M pid 12541
M
M
M Thu Jun 7 11:46:10 2012
M kernel runs with dp version 133000(ext=118000) (@(#) DPLIB-INT-VERSION-133000-UC)
M length of sys_adm_ext is 588 bytes
M ThStart: taskhandler started
M ThInit: initializing DIA work process W0
M ***LOG Q01=> ThInit, WPStart (Workp. 0 1 12541) [thxxhead.c 1321]
M
M Thu Jun 7 11:46:11 2012
M ThInit: running on host haidrislm
M calling db_connect ...
B Loading DB library '/usr/sap/SLM/DVEBMGS00/exe/dbsdbslib.so' ...
B Library '/usr/sap/SLM/DVEBMGS00/exe/dbsdbslib.so' loaded
B Version of '/usr/sap/SLM/DVEBMGS00/exe/dbsdbslib.so' is "720.00", patchlevel (0.201)
C
C DBSDBSLIB : version 720.00, patch 0.201 (Make PL 0.201)
C MAXDB shared library (dbsdbslib) patchlevels (last 10)
C (0.201) Take care of warnings during database connect (note 1600066)
C (0.117) Define a primary key on the temp tables for R3szchk (note 1606260)
C (0.114) Support of MaxDB 7.8 and 7.9 (note 1653058)
C (0.103) Close all lob locators at end of the transaction (note 1626591)
C (0.101) Fix for unknown table __TABLE_SIZES_ (R3szchk) (note 1619504)
C (0.098) Use filesystem counter for R3szchk (note 1606260)
C (0.092) Secondary connection to HANA (note 1481256)
C (0.089) UPDSTAT with SAPSYSTEMNAME longer as 3 characters (note 1584921)
C (0.081) No UPSERT on WBCROSSGT (note 1521468)
C (0.080) New feature batch streaming (note 1340617)
C
C
C Loading SQLDBC client runtime ...
C SQLDBC Module : /sapdb/clients/SLM/lib/libSQLDBC77.so
C SQLDBC SDK : SQLDBC.H 7.8.2 BUILD 017-121-241-257
C SQLDBC Runtime : libSQLDBC 7.8.1 BUILD 014-121-233-288
C SQLDBC client runtime is MaxDB 7.8.1.014 CL 233288
C SQLDBC supports new DECIMAL interface : 1
C SQLDBC supports VARIABLE INPUT data : 1
C SQLDBC supports VARIABLE OUTPUT data : 1
C SQLDBC supports Multiple Streams : 1
C SQLDBC supports LOB LOCATOR KEEPALIVE : 1
C SQLDBC supports LOB LOCATOR COPY : 1
C SQLDBC supports BULK SELECT with LOBS : 1
C SQLDBC supports BATCH STREAM : 0
C INFO : SQLOPT= -I 0 -t 0 -S SAPR3
C Try to connect (DEFAULT) on connection 0 ...
C Attach to SAP DB : Kernel 7.8.01 Build 014-121-233-288
C Database release is SAP DB 7.8.01.014
C INFO : Database 'SLM' instance is running on 'haidrislm'
C DB supports UPSERT SQL syntax : 1
C DB supports new EXPAND syntax : 1
C DB supports LOB locators : 1
C DB uses MVCC support : 0
C DB max. input host variables : 2000
C DB max. statement length : 65535
C UPSERT is disabled for : WBCROSSGT
C INFO : SAP DB Packet_Size = 131072
C INFO : SAP DB Min_Reply_Size = 4096
C INFO : SAP DB Comm_Size = 126976
C INFO : DBSL buffer size = 126976
C
C Thu Jun 7 11:46:12 2012
C INFO : SAP DB MaxLocks = 300000
C INFO : Connect to DB as 'SAPSLM'
C Command info enabled
C Now I'm connected to MaxDB
C 00: haidrislm-SLM, since=20120607114611, ABAP= <unknown> (0)
B Connection 0 opened (DBSL handle 0)
C INFO : SAP RELEASE (DB) = 702
M ThInit: db_connect o.k.
M ICT: exclude compression: *.zip,*.rar,*.arj,*.z,*.gz,*.tar,*.lzh,*.cab,*.hqx,*.ace,*.jar,*.ear,*.war,*.css,*.pdf,*.gzip,*.uue,*.bz2,*.iso,*.sda,*.sar,*.gif,*.png,*.swc,*.swf
I
I Thu Jun 7 11:46:25 2012
I MtxInit: 0 0 0
M SHM_PRES_BUF (addr: 7fb868ed2000, size: 4400000)
M SHM_ROLL_AREA (addr: 7fb74c607000, size: 268435456)
M SHM_PAGING_AREA (addr: 7fb73c607000, size: 268435456)
M SHM_ROLL_ADM (addr: 7fb869306000, size: 11142696)
M SHM_PAGING_ADM (addr: 7fb73c2e6000, size: 3277856)
M ThCreateNoBuffer allocated 564152 bytes for 1000 entries at 7fb735818000
M ThCreateNoBuffer index size: 3000 elems
M ThCreateVBAdm allocated 30976 bytes (50 server) at 7fb879e92000
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation std
X Linux: Kernel supports shared memory disclaiming
X Linux: using madvise(<pointer>, <size>, 9).
X Linux: disclaiming for shared memory enabled
X ES initialized.
X mm.dump: set maximum dump mem to 96 MB
I *** INFO SHM 45 in POOL 40 4771 KB estimated 3625 KB real ( -1146 KB -25 %)
B db_con_shm_ini: WP_ID = 0, WP_CNT = 19, CON_ID = -1
B dbtbxbuf: Buffer TABL (addr: 7fb732697100, size: 30000000, end: 7fb734333480)
B dbtbxbuf: Buffer TABLP (addr: 7fb731cd3100, size: 10240000, end: 7fb732697100)
B dbsync[db_syinit]: successfully attached to shared memory, sync_adm_p = 7fb738812000
B dbsync[db_syinit]: Buffer synchronisation started with
B sync_concept = SEQ_NR
B sendon = 1
B bufreftime = 120
B max_gap_wait_time = 60
B ddlog_del_time = 60
B last_counter = -2147399349
B oldest_gap = (2147483647,00000000000000)
B time_of_last_sync = 20120607114622
B MySysId = 'haidrislm 00'
B dbexpbuf: Buffer EIBUF (addr: 7fb72ebfe108, size: 51200000, end: 7fb731cd2108)
B dbexpbuf: Buffer ESM (addr: 7fb72e7fd108, size: 4194304, end: 7fb72ebfd108)
B dbexpbuf: Buffer CUA (addr: 7fb738814108, size: 3072000, end: 7fb738b02108)
B dbexpbuf: Buffer OTR (addr: 7fb72e3fc108, size: 4194304, end: 7fb72e7fc108)
I MPI: dynamic quotas disabled.
I MPI init: pipes=4000 buffers=1279 reserved=383 quota=10%
M rdisp/thsend_mode : -1 -> 0
M rdisp/setactfields_late : -1 -> 0
M CCMS uses Shared Memory Key 73 for monitoring.
M CCMS: SemInMgt: Semaphore Management initialized by AlAttachShm_Doublestack.
M CCMS: SemInit: Semaphore 38 initialized by AlAttachShm_Doublestack.
G
G Thu Jun 7 11:46:26 2012
G RelWritePermissionForShm( pLocation = 120, pEnforce = 0 )
G GetWritePermissionForShm( pLocation = 99, pEnforce = 1 )
G RelWritePermissionForShm( pLocation = 100, pEnforce = 1 )
S *** init spool environment
S TSPEVJOB updates outside critical section: event_update_nocsec = 1
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 66b5e80
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 1 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 150
S printer type list size is 50
S queue size (profile) = 300
S hostspool list size = 3000
S option list size is 30
I *** INFO SHM 49 in POOL 40 2898 KB estimated 1632 KB real ( -1266 KB -44 %)
S found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 7fb738b03070
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 7fb738b03750
S using messages for server info
S size of spec char cache entry: 297032 bytes (timeout 100 sec)
S size of open spool request entry: 2512 bytes
S immediate print option for implicitely closed spool requests is disabled
N SncInit(): Initializing Secure Network Communication (SNC)
N AMD/Intel x86_64 with Linux (st,ascii,SAP_UC/size_t/void* = 16/64/64)
N SncInit(): found snc/data_protection/max=3, using 3 (Privacy Level)
N SncInit(): found snc/data_protection/min=2, using 2 (Integrity Level)
N SncInit(): found snc/data_protection/use=9, using 3 (Privacy Level)
N SncInit(): Trying builtin default as a
N gssapi library name: "sncgss.so".
N SncInit(): snc/gssapi_lib UNDEFINED in profile!
N YOU DEFINITELY SHOULD SET snc/gssapi_lib !!
M *** ERROR => DlLoadLib()==DLENOACCESS - dlopen("sncgss.so") FAILED
"sncgss.so: cannot open shared object file: No such file or directory" [dlux.c 445]
N *** ERROR => SncPDLInit()==SNCERR_INIT, Adapter #1 (sncgss.so) not loaded [sncxxdl.c 640]
N <<- SncInit()==SNCERR_INIT
N sec_avail = "false"
M ***LOG R19=> ThSncInit, SncInitU ( SNC-000001) [thxxsnc.c 237]
M *** ERROR => ThSncInit: SncInitU (SNCERR_INIT) [thxxsnc.c 239]
M in_ThErrHandle: 1
M *** ERROR => SncInitU (step 1, th_errno 44, action 3, level 1) [thxxhead.c 11321]
M
M Info for wp 0
M
M pid = 12541
M severity = 0
M status = 0
M stat = WP_NEW
M waiting_for = NO_WAITING
M reqtype = DP_RQ_DIAWP
M act_reqtype = NO_REQTYPE
M req.req_info =
M req.tid = -1
M req.uid = 4294967295
M req.mode = 255
M req.len = 0
M req.rq_id = 65535
M req.rq_source =
M last_tid = 0
M last_uid = 0
M last_mode = 0
M act_cs_count = 0
M csTrack = 0
M csTrackRwExcl = 0
M csTrackRwShrd = 0
M mode_cleaned_counter = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M attachedVm = no VM
M
M ThIErrHandle: current request:
M
M -IN-- sender_id ? tid -1 wp_ca_blk -1 wp_id -1
M -IN-- action - uid -1 appc_ca_blk -1 type -
M -IN-- new_stat NO_CHANGE mode 255 len 0 rq_id -1
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >TrThHookFunc< for event BEFORE_DUMP
M TrThHookFunc: called for WP dump
M ThCallHooks: hook >TrThHookFunc< o.k.
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 844]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 303]
M ThCallHooks: call hook >ThrBtcCallLgCl< for event BEFORE_DUMP
M ThCallHooks: hook >ThrBtcCallLgCl< o.k.
M ThIErrHandle: entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workp. 0 12541) [dpuxtool.c 327]
trc file: "dev_disp.new", trc level: 1, release: "720"
sysno 00
sid SLM
systemid 390 (AMD/Intel x86_64 with Linux)
relno 7200
patchlevel 0
patchno 201
intno 20020600
make single threaded, Unicode, 64 bit, optimized
profile /usr/sap/SLM/SYS/profile/SLM_DVEBMGS00_haidrislm
pid 12502
kernel runs with dp version 133000(ext=118000) (@(#) DPLIB-INT-VERSION-133000-UC)
length of sys_adm_ext is 588 bytes
*** SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 12502) [dpxxdisp.c 1315]
shared lib "dw_xml.so" version 201 successfully loaded
shared lib "dw_xtc.so" version 201 successfully loaded
shared lib "dw_stl.so" version 201 successfully loaded
shared lib "dw_gui.so" version 201 successfully loaded
shared lib "dw_mdm.so" version 201 successfully loaded
shared lib "dw_rndrt.so" version 201 successfully loaded
shared lib "dw_abp.so" version 201 successfully loaded
shared lib "dw_sym.so" version 201 successfully loaded
shared lib "dw_aci.so" version 201 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
rdisp/dynamic_wp_check : 1
rdisp/calculateLoadAverage : 1
Thu Jun 7 11:46:10 2012
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: write dp-profile-values into sys_adm_ext
DpIPCInit2: start server >haidrislm_SLM_00 <
DpShMCreate: sizeof(wp_adm) 43016 (2264)
DpShMCreate: sizeof(tm_adm) 5581368 (27768)
DpShMCreate: sizeof(wp_ca_adm) 80000 (80)
DpShMCreate: sizeof(appc_ca_adm) 80000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/576056/576064
DpShMCreate: sizeof(comm_adm) 576064 (1144)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (296)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (80)
DpShMCreate: sizeof(vmc_adm) 0 (2296)
DpShMCreate: sizeof(wall_adm) (40056/42872/80/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: sizeof(j2ee_adm) 3952
DpShMCreate: SHM_DP_ADM_KEY (addr: 7fb868801000, size: 6461400)
DpShMCreate: allocated sys_adm at 7fb868801008
DpShMCreate: allocated wp_adm_list at 7fb868804130
DpShMCreate: allocated wp_adm at 7fb868804318
DpShMCreate: allocated tm_adm_list at 7fb86880eb28
DpShMCreate: allocated tm_adm at 7fb86880eb70
DpShMCreate: allocated wp_ca_adm at 7fb868d615b0
DpShMCreate: allocated appc_ca_adm at 7fb868d74e38
DpShMCreate: allocated comm_adm at 7fb868d886c0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 7fb868e15108
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated gw_adm at 7fb868e151b0
DpShMCreate: allocated j2ee_adm at 7fb868e151e8
DpShMCreate: allocated ca_info at 7fb868e16160
DpShMCreate: allocated wall_adm at 7fb868e16200
DpCommAttachTable: attached comm table (header=7fb868d886c0/ft=7fb868d886c8)
DpSysAdmIntInit: initialize sys_adm
rdisp/test_roll : roll strategy is DP_NORMAL_ROLL
dia token check not active (10 token)
MBUF state OFF
DpCommInitTable: init table for 500 entries
DpRqQInit: keep protect_queue / slots_per_queue 0 / 2001 in sys_adm
rdisp/queue_size_check_value : -> on,50,30,40,500,50,500,80
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> EsILock: use spinlock for locking
<ES> InitFreeList
<ES> block size is 4096 kByte.
Using implementation std
EsStdUnamFileMapInit: ES base = 0x7fb7625dc000
EsStdInit: Extended Memory 4096 MB allocated
Linux: Kernel supports shared memory disclaiming
Linux: using madvise(<pointer>, <size>, 9).
Linux: disclaiming for shared memory enabled
<ES> 1023 blocks reserved for free list.
ES initialized.
mm.dump: set maximum dump mem to 96 MB
DpVmcSetActive: set vmc state DP_VMC_NOT_ACTIVE
MPI: dynamic quotas disabled.
MPI init: pipes=4000 buffers=1279 reserved=383 quota=10%
J2EE server info
start = TRUE
state = STARTED
pid = 12540
argv[0] = /usr/sap/SLM/DVEBMGS00/exe/jcontrol
argv[1] = /usr/sap/SLM/DVEBMGS00/exe/jcontrol
argv[2] = pf=/usr/sap/SLM/SYS/profile/SLM_DVEBMGS00_haidrislm
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=65000
argv[5] = -DSAPSYSTEM=00
argv[6] = -DSAPSYSTEMNAME=SLM
argv[7] = -DSAPMYNAME=haidrislm_SLM_00
argv[8] = -DSAPPROFILE=/usr/sap/SLM/SYS/profile/SLM_DVEBMGS00_haidrislm
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.4 3.4 4.1) [dpxxdisp.c 1701]
***LOG Q0K=> DpMsAttach, mscon ( haidrislm) [dpxxdisp.c 12467]
MBUF state LOADING
DpStartStopMsg: send start message (myname is >haidrislm_SLM_00 <)
DpStartStopMsg: start msg sent
*** WARNING: resource limit value for 'max open files' too low (1024 < 32800)
**START Linux Memory Parameter Check
virtual memory: hard-limit = UNLIMITED
virtual memory: soft-limit = UNLIMITED
core size: hard-limit = UNLIMITED
core size: soft-limit = 0 MB
data segment size: hard-limit = UNLIMITED
data segment size: soft-limit = UNLIMITED
stack size: hard-limit = UNLIMITED
stack size: soft-limit = 8 MB
max open files: hard-limit = 1024
max open files: soft-limit = 1024
Page Size: 4 KB
kernel.shmmax = 8796093022207 MB
kernel.shmall = 4503599627370495 MB
**END Linux Memory Parameter Check
CCMS uses Shared Memory Key 73 for monitoring.
CCMS: Initalized shared memory of size 60000000 for monitoring segment.
CCMS: Checking Downtime Configuration of Monitoring Segment.
CCMS: AlMsUpload called by wp 1024.
Thu Jun 7 11:46:11 2012
CCMS: AlMsUpload successful for /usr/sap/SLM/DVEBMGS00/log/ALMTTREE (2062 MTEs).
Thu Jun 7 11:46:12 2012
CCMS: start to initalize 3.X shared alert area (first segment).
DpJ2eeLogin: j2ee state = CONNECTED
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1296]
MBUF state ACTIVE
DpWpBlksLow: max wp blocks in queue is 800 (80 %)
MBUF component UP
DpMsgProcess: 1 server in MBUF
DpAppcBlksLow: max appc blocks in queue is 500 (50 %)
Thu Jun 7 11:46:32 2012
*** ERROR => DpHdlDeadWp: W0 (pid 12541) died (severity=0, status=65280) [dpxxwp.c 1531]
DpTraceWpStatus: child (pid=12541) exited with exit code 255
*** ERROR => DpHdlDeadWp: W1 (pid 12542) died (severity=0, status=65280) [dpxxwp.c 1531]
DpTraceWpStatus: child (pid=12542) exited with exit code 255
*** ERROR => DpHdlDeadWp: W2 (pid 12543) died (severity=0, status=65280) [dpxxwp.c 1531]
DpTraceWpStatus: child (pid=12543) exited with exit code 255
*** ERROR => DpHdlDeadWp: W3 (pid 12544) died (severity=0, status=65280) [dpxxwp.c 1531]
DpTraceWpStatus: child (pid=12544) exited with exit code 255
*** ERROR => DpHdlDeadWp: W4 (pid 12545) died (severity=0, status=65280) [dpxxwp.c 1531]
DpTraceWpStatus: child (pid=12545) exited with exit code 255
*** ERROR => DpHdlDeadWp: W5 (pid 12546) died (severity=0, status=65280) [dpxxwp.c 1531]
DpTraceWpStatus: child (pid=12546) exited with exit code 255
*** ERROR => DpHdlDeadWp: W6 (pid 12547) died (severity=0, status=65280) [dpxxwp.c 1531]
DpTraceWpStatus: child (pid=12547) exited with exit code 255
*** ERROR => DpHdlDeadWp: W7 (pid 12548) died (severity=0, status=65280) [dpxxwp.c 1531]
DpTraceWpStatus: child (pid=12548) exited with exit code 255
*** ERROR => DpHdlDeadWp: W8 (pid 12549) died (severity=0, status=65280) [dpxxwp.c 1531]
DpTraceWpStatus: child (pid=12549) exited with exit code 255
*** ERROR => DpHdlDeadWp: W9 (pid 12550) died (severity=0, status=65280) [dpxxwp.c 1531]
DpTraceWpStatus: child (pid=12550) exited with exit code 255
*** ERROR => DpHdlDeadWp: W10 (pid 12551) died (severity=0, status=65280) [dpxxwp.c 1531]
DpTraceWpStatus: child (pid=12551) exited with exit code 255
*** ERROR => DpHdlDeadWp: W11 (pid 12552) died (severity=0, status=65280) [dpxxwp.c 1531]
DpTraceWpStatus: child (pid=12552) exited with exit code 255
*** ERROR => DpHdlDeadWp: W12 (pid 12553) died (severity=0, status=65280) [dpxxwp.c 1531]
DpTraceWpStatus: child (pid=12553) exited with exit code 255
*** ERROR => DpHdlDeadWp: W13 (pid 12554) died (severity=0, status=65280) [dpxxwp.c 1531]
DpTraceWpStatus: child (pid=12554) exited with exit code 255
*** ERROR => DpHdlDeadWp: W14 (pid 12555) died (severity=0, status=65280) [dpxxwp.c 1531]
DpTraceWpStatus: child (pid=12555) exited with exit code 255
*** ERROR => DpHdlDeadWp: W15 (pid 12556) died (severity=0, status=65280) [dpxxwp.c 1531]
DpTraceWpStatus: child (pid=12556) exited with exit code 255
*** ERROR => DpHdlDeadWp: W16 (pid 12557) died (severity=0, status=65280) [dpxxwp.c 1531]
DpTraceWpStatus: child (pid=12557) exited with exit code 255
*** DP_FATAL_ERROR => DpWPCheck: no more work processes
*** DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=16
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jun 7 11:46:42 2012
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Thu Jun 7 06:46:42 2012
========================
No Type Pid Status Cause Start Rstr Err Sem Time Program Cl User Action Table
0 DIA -1 Ended no no 1 0 0 NO_ACTION
1 DIA -1 Ended no no 1 0 0 NO_ACTION
2 DIA -1 Ended no no 1 0 0 NO_ACTION
3 DIA -1 Ended no no 1 0 0 NO_ACTION
4 DIA -1 Ended no no 1 0 0 NO_ACTION
5 DIA -1 Ended no no 1 0 0 NO_ACTION
6 DIA -1 Ended no no 1 0 0 NO_ACTION
7 DIA -1 Ended no no 1 0 0 NO_ACTION
8 DIA -1 Ended no no 1 0 0 NO_ACTION
9 DIA -1 Ended no no 1 0 0 NO_ACTION
10 UPD -1 Ended no no 1 0 0 NO_ACTION
11 ENQ -1 Ended no no 1 0 0 NO_ACTION
12 BTC -1 Ended no no 1 0 0 NO_ACTION
13 BTC -1 Ended no no 1 0 0 NO_ACTION
14 BTC -1 Ended no no 1 0 0 NO_ACTION
15 SPO -1 Ended no no 1 0 0 NO_ACTION
16 UP2 -1 Ended no no 1 0 0 NO_ACTION
Dispatcher Queue Statistics Thu Jun 7 06:46:42 2012
===========================
+------+--------+--------+--------+------------+------------+
| Typ | now | high | max | writes | reads |
+------+--------+--------+--------+------------+------------+
| NOWP | 0 | 4 | 2000 | 5 | 5 |
+------+--------+--------+--------+------------+------------+
| DIA | 3 | 3 | 2000 | 3 | 0 |
+------+--------+--------+--------+------------+------------+
| UPD | 0 | 0 | 2000 | 0 | 0 |
+------+--------+--------+--------+------------+------------+
| ENQ | 0 | 0 | 2000 | 0 | 0 |
+------+--------+--------+--------+------------+------------+
| BTC | 0 | 0 | 2000 | 0 | 0 |
+------+--------+--------+--------+------------+------------+
| SPO | 0 | 0 | 2000 | 0 | 0 |
+------+--------+--------+--------+------------+------------+
| UP2 | 0 | 0 | 2000 | 0 | 0 |
+------+--------+--------+--------+------------+------------+
max_rq_id 21
wake_evt_udp_now 0
wake events total 6, udp 1 ( 16%), shm 5 ( 83%)
since last update total 6, udp 1 ( 16%), shm 5 ( 83%)
DpGetLoadAverage: la1[1] = 0.000000 / -1.000000 %
DpGetLoadAverage: la5[1] = 0.000000 / -1.000000 %
DpGetLoadAverage: la15[1] = 0.000000 / -1.000000 %
Dispatcher Load Statistics
+------+---------+---------+---------+
| Typ | LA1 | LA5 | LA15 |
+------+---------+---------+---------+
| DIA | 0.000 | 0.000 | 0.000 |
+------+---------+---------+---------+
DpGetLoadAverage: la1[2] = 0.000000 / -1.000000 %
DpGetLoadAverage: la5[2] = 0.000000 / -1.000000 %
DpGetLoadAverage: la15[2] = 0.000000 / -1.000000 %
| UPD | 0.000 | 0.000 | 0.000 |
+------+---------+---------+---------+
DpGetLoadAverage: la1[3] = 0.000000 / -1.000000 %
DpGetLoadAverage: la5[3] = 0.000000 / -1.000000 %
DpGetLoadAverage: la15[3] = 0.000000 / -1.000000 %
| ENQ | 0.000 | 0.000 | 0.000 |
+------+---------+---------+---------+
DpGetLoadAverage: la1[4] = 0.000000 / -1.000000 %
DpGetLoadAverage: la5[4] = 0.000000 / -1.000000 %
DpGetLoadAverage: la15[4] = 0.000000 / -1.000000 %
| BTC | 0.000 | 0.000 | 0.000 |
+------+---------+---------+---------+
DpGetLoadAverage: la1[5] = 0.000000 / -1.000000 %
DpGetLoadAverage: la5[5] = 0.000000 / -1.000000 %
DpGetLoadAverage: la15[5] = 0.000000 / -1.000000 %
| SPO | 0.000 | 0.000 | 0.000 |
+------+---------+---------+---------+
DpGetLoadAverage: la1[6] = 0.000000 / -1.000000 %
DpGetLoadAverage: la5[6] = 0.000000 / -1.000000 %
DpGetLoadAverage: la15[6] = 0.000000 / -1.000000 %
| UP2 | 0.000 | 0.000 | 0.000 |
+------+---------+---------+---------+
Dump of tm_adm structure: Thu Jun 7 06:46:42 2012
=========================
Term uid man user term lastop mod wp ta a/i (modes)
RM-T19, U20, , , 11:46:18, M0, W-1, , 1/0
Workprocess Comm. Area Blocks Thu Jun 7 06:46:42 2012
=============================
Slots: 1000, Used: 14, Max: 14
+------+--------------+----------+-------------+
| id | owner | pid | eyecatcher |
+------+--------------+----------+-------------+
| 0 | DISPATCHER | -1 | 0xdeadbeef |
| 156 | WORK_PROCESS | -1 | 0xdeadbeef |
| 157 | WORK_PROCESS | -1 | 0xdeadbeef |
| 158 | WORK_PROCESS | -1 | 0xdeadbeef |
| 159 | WORK_PROCESS | -1 | 0xdeadbeef |
| 160 | WORK_PROCESS | -1 | 0xdeadbeef |
| 161 | WORK_PROCESS | -1 | 0xdeadbeef |
| 162 | WORK_PROCESS | -1 | 0xdeadbeef |
| 163 | WORK_PROCESS | -1 | 0xdeadbeef |
| 164 | WORK_PROCESS | -1 | 0xdeadbeef |
| 165 | WORK_PROCESS | -1 | 0xdeadbeef |
| 166 | WORK_PROCESS | -1 | 0xdeadbeef |
| 167 | WORK_PROCESS | -1 | 0xdeadbeef |
| 168 | WORK_PROCESS | -1 | 0xdeadbeef |
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=16
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jun 7 11:46:47 2012
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >haidrislm_SLM_00 < (normal)
DpJ2eeDisableRestart
MsIDelService: delete service J2EE for myself
NiBufSend starting
NiIWrite: hdl 25 sent data (wrt=161,pac=1,MESG_IO)
MsINiWrite: sent 161 bytes
MsISnd2: send msg (ms hdr/msg 110/51 bytes) to name MSG_SERVER, type 0, key -
MsSndName: MS_DEL_PROPERTY ok
Send 51 bytes to MSG_SERVER
MS_DEL_PROPERTY : asynchronous call
send MsDelService(J2EE) to msgserver
DpIJ2eeShutdown: send SIGQUIT to SAP J2EE startup framework (pid=12540)
killing proc (12540) (SOFTSHUTDOWN_KILL)
MsIDelService: delete service J2EE for myself
NiBufIAlloc: malloc MSLIB-BUF, to 32110 bytes
NiBufSend starting
NiIWrite: hdl 25 sent data (wrt=161,pac=1,MESG_IO)
MsINiWrite: sent 161 bytes
MsISnd2: send msg (ms hdr/msg 110/51 bytes) to name MSG_SERVER, type 0, key -
MsSndName: MS_DEL_PROPERTY ok
Send 51 bytes to MSG_SERVER
MS_DEL_PROPERTY : asynchronous call
send DpDelService(J2EE) to msgserver
MsDelLogon
MsIBuildLogonData: prot = MS_LOGON_J2EE (2)
NiBufIAlloc: malloc MSLIB-BUF, to 32110 bytes
NiBufSend starting
NiIWrite: hdl 25 sent data (wrt=132,pac=1,MESG_IO)
MsINiWrite: sent 132 bytes
MsISnd2: send msg (ms hdr/msg 110/22 bytes) to name MSG_SERVER, type 0, key -
MsSndName: MS_DEL_LOGON ok
Send 22 bytes to MSG_SERVER
MS_DEL_LOGON : asynchronous call
MsDelLogon
MsIBuildLogonData: prot = MS_LOGON_J2EERI (2)
NiBufIAlloc: malloc MSLIB-BUF, to 32110 bytes
NiBufSend starting
NiIWrite: hdl 25 sent data (wrt=132,pac=1,MESG_IO)
MsINiWrite: sent 132 bytes
MsISnd2: send msg (ms hdr/msg 110/22 bytes) to name MSG_SERVER, type 0, key -
MsSndName: MS_DEL_LOGON ok
Send 22 bytes to MSG_SERVER
MS_DEL_LOGON : asynchronous call
MsDelLogon
MsIBuildLogonData: prot = MS_LOGON_J2EES (2)
NiBufIAlloc: malloc MSLIB-BUF, to 32110 bytes
NiBufSend starting
NiIWrite: hdl 25 sent data (wrt=132,pac=1,MESG_IO)
MsINiWrite: sent 132 bytes
MsISnd2: send msg (ms hdr/msg 110/22 bytes) to name MSG_SERVER, type 0, key -
MsSndName: MS_DEL_LOGON ok
Send 22 bytes to MSG_SERVER
MS_DEL_LOGON : asynchronous call
MsDelLogon
MsIBuildLogonData: prot = MS_LOGON_J2EESRI (2)
NiBufIAlloc: malloc MSLIB-BUF, to 32110 bytes
NiBufSend starting
NiIWrite: hdl 25 sent data (wrt=132,pac=1,MESG_IO)
MsINiWrite: sent 132 bytes
MsISnd2: send msg (ms hdr/msg 110/22 bytes) to name MSG_SERVER, type 0, key -
MsSndName: MS_DEL_LOGON ok
Send 22 bytes to MSG_SERVER
MS_DEL_LOGON : asynchronous call
MsDelLogon
MsIBuildLogonData: prot = MS_LOGON_P4 (2)
NiBufIAlloc: malloc MSLIB-BUF, to 32110 bytes
NiBufSend starting
NiIWrite: hdl 25 sent data (wrt=132,pac=1,MESG_IO)
MsINiWrite: sent 132 bytes
MsISnd2: send msg (ms hdr/msg 110/22 bytes) to name MSG_SERVER, type 0, key -
MsSndName: MS_DEL_LOGON ok
Send 22 bytes to MSG_SERVER
MS_DEL_LOGON : asynchronous call
MsDelLogon
MsIBuildLogonData: prot = MS_LOGON_P4S (2)
NiBufIAlloc: malloc MSLIB-BUF, to 32110 bytes
NiBufSend starting
NiIWrite: hdl 25 sent data (wrt=132,pac=1,MESG_IO)
MsINiWrite: sent 132 bytes
MsISnd2: send msg (ms hdr/msg 110/22 bytes) to name MSG_SERVER, type 0, key -
MsSndName: MS_DEL_LOGON ok
Send 22 bytes to MSG_SERVER
MS_DEL_LOGON : asynchronous call
MsDelLogon
MsIBuildLogonData: prot = MS_LOGON_IIOP (2)
NiBufIAlloc: malloc MSLIB-BUF, to 32110 bytes
NiBufSend starting
NiIWrite: hdl 25 sent data (wrt=132,pac=1,MESG_IO)
MsINiWrite: sent 132 bytes
MsISnd2: send msg (ms hdr/msg 110/22 bytes) to name MSG_SERVER, type 0, key -
MsSndName: MS_DEL_LOGON ok
Send 22 bytes to MSG_SERVER
MS_DEL_LOGON : asynchronous call
MsDelLogon
MsIBuildLogonData: prot = MS_LOGON_IIOPS (2)
NiBufIAlloc: malloc MSLIB-BUF, to 32110 bytes
NiBufSend starting
NiIWrite: hdl 25 sent data (wrt=132,pac=1,MESG_IO)
MsINiWrite: sent 132 bytes
MsISnd2: send msg (ms hdr/msg 110/22 bytes) to name MSG_SERVER, type 0, key -
MsSndName: MS_DEL_LOGON ok
Send 22 bytes to MSG_SERVER
MS_DEL_LOGON : asynchronous call
MsDelLogon
MsIBuildLogonData: prot = MS_LOGON_TELNET (2)
NiBufIAlloc: malloc MSLIB-BUF, to 32110 bytes
NiBufSend starting
NiIWrite: hdl 25 sent data (wrt=132,pac=1,MESG_IO)
MsINiWrite: sent 132 bytes
MsISnd2: send msg (ms hdr/msg 110/22 bytes) to name MSG_SERVER, type 0, key -
MsSndName: MS_DEL_LOGON ok
Send 22 bytes to MSG_SERVER
MS_DEL_LOGON : asynchronous call
DpIJ2eeShutdown: j2ee state = SHUTDOWN
NiBufISelUpdate: new STAT --- (r--) for hdl 33 in set0
NiSelIListRemove: remove hdl 33 [4] from buf-list (1) of set0
NiBufISelRemove: remove hdl 33 from set0
SiSelPRemove: removed sock 14 (pos=4)
NiSelIRemove: removed hdl 33
DpDelSocketInfo: del info for nihdl 33 (pos/type=4/8)
NiICloseHandle: shutdown and close hdl 33/sock 14
NiBufIClose: clear extension for hdl 33
SemRq( 34, 1, -1) enter
SemRq( 34, 1, -1) exit rtc=0, 0us
SemRel( 34, 1 ) enter
SemRel( 34, 1 ) exit rtc=0, 0us
DpMBufRead: read server list from MBUF (1 entries)
SemRq( 34, 1, -1) enter
SemRq( 34, 1, -1) exit rtc=0, 0us
DpMBufMod: name [haidrislm_SLM_00 ], types 191 state 3 (0x0 0x0 0x0 0x0)
SemRel( 34, 1 ) enter
SemRel( 34, 1 ) exit rtc=0, 0us
DpMBufMod: call hooks for event MBUF_DPEVT_DSTATE (5->3)
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 60
AdCallRegisteredCvtToExt: opcode 60 call 1b08b80
AdCallRegisteredCvtToExt: opcode 60 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 1b05120
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 1b05120
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 1b05120
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 1b05120
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 1b05120
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 1b05120
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 1b05120
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 1b05120
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 1b05120
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 1b05120
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
DpWpBlksLow: wp_blks_in_queue/limit/max = 1/800/1000
DpLockWpBlkEx: lock wp ca_blk 1
make DISP owner of wp_ca_blk 1
SemRq( 2, 1, -1) enter
SemRq( 2, 1, -1) exit rtc=0, 0us
SemRel( 2, 1 ) enter
SemRel( 2, 1 ) exit rtc=0, 0us
DpRqIPutIntoQ: put elem in queue DIA, elems=4
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 22)
MBUF server state SHUTDOWN
DpModState: change state STARTING -> SHUTDOWN
NiBufIAlloc: malloc MSLIB-BUF, to 32110 bytes
NiBufSend starting
NiIWrite: hdl 25 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
AdCvtRecToExt: opcode 21 (AD_RZL_STRG), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 21
AdCallRegisteredCvtToExt: opcode 21 call 1b0a360
AdCvtRecRzlStrgToExt TYPE_WRITE_C TY 32, NL 20, VO 0, VL 40, NA SAPMSSY6_LB
AdCvtRecRzlStrgToExt VAL haidrislm_SLM_00
AdCallRegisteredCvtToExt: opcode 21 exit rc=SAP_O_K
eyec AD-EYECATCH vers 1 type AD_REQUEST rec_size 104 rec_no 1
R# Op S# Ex Er | Data
----------------+------
0 21 0 0 0 |
AdCvtRecToInt: opcode 21 (AD_RZL_STRG), ser 0, ex 0, errno 0
AdCallRegisteredCvtToInt: opcode 21
AdCallRegisteredCvtToInt: opcode 21 call 1b09200
AdCvtRecRzlStrgToInt TYPE_WRITE_C TY 32, NL 20, VO 0, VL 40, NA SAPMSSY6_LB
AdCvtRecRzlStrgToInt VAL haidrislm_SLM_00
AdCallRegisteredCvtToInt: opcode 21 exit rc=SAP_O_K
AdCvtRecToExt: opcode 21 (AD_RZL_STRG), ser 0, ex 1, errno 0
AdCallRegisteredCvtToExt: opcode 21
AdCallRegisteredCvtToExt: opcode 21 call 1b0a360
AdCvtRecRzlStrgToExt TYPE_WRITE_C TY 32, NL 20, VO 0, VL 40, NA SAPMSSY6_LB
AdCvtRecRzlStrgToExt VAL haidrislm_SLM_00
AdCallRegisteredCvtToExt: opcode 21 exit rc=SAP_O_K
eyec AD-EYECATCH vers 1 type AD_REPLY rec_size 104 rec_no 1
R# Op S# Ex Er | Data
----------------+------
0 21 0 1 0 |
DpTriggerAutoabap: trigger auto abap (only load balance)
DpTriggerAutoabap: add to ad storage : >SAPMSSY6_LB < >haidrislm_SLM_00 <
SemRq( 2, 1, -1) enter
SemRq( 2, 1, -1) exit rtc=0, 0us
SemRel( 2, 1 ) enter
SemRel( 2, 1 ) exit rtc=0, 0us
DpRqIPutIntoQ: put elem in queue DIA, elems=5
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 23)
DpModState: change server state from STARTING to SHUTDOWN
DpHalt: switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect: shmat key 57 prot 3/0 done
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect: shmat key 57 prot 1/4096 done
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
DpHalt: stop work processes
DpHalt: stop gateway
killing proc (12538) (SOFT_KILL)
DpHalt: stop icman
killing proc (12539) (SOFT_KILL)
DpHalt: terminate gui connections
send SHUTDOWN to REM TM 19
DpWpBlksLow: wp_blks_in_queue/limit/max = 2/800/1000
DpLockWpBlkEx: lock wp ca_blk 2
return errno (-17) to T19
DpTmSend: errormsg without overhead: use mode 0
NiBufIAlloc: malloc NiBufadm, to 0 bytes
DpTmSend: try to send 14 bytes to T19/M0
NiBufSend starting
NiIWrite: hdl 49 sent data (wrt=14,pac=1,MESG_IO)
REL WP ca_blk 2
SemRq( 4, 1, -1) enter
SemRq( 4, 1, -1) exit rtc=0, 0us
SemRel( 4, 1 ) enter
SemRel( 4, 1 ) exit rtc=0, 0us
set status of T19 to TM_DISCONNECTED
NiBufISelUpdate: new MODE -- (r-) for hdl 49 in set0
SiSelPSet: set events of sock 15 to: ---
NiBufISelRemove: remove hdl 49 from set0
SiSelPRemove: removed last sock 15 (pos=7)
NiSelIRemove: removed hdl 49
DpDelSocketInfo: del info for nihdl 49 (pos/type=6/3)
NiICloseHandle: shutdown and close hdl 49/sock 15
NiBufIClose: clear extension for hdl 49
dp_tm_adm[19].stat = DP_SLOT_FREE
DpGetSchedule: next schedule 1339051590/487600
DpGetSchedule: no schedule found
DpITmSlotRelease: release slot 19
SemRq( 4, 1, -1) enter
SemRq( 4, 1, -1) exit rtc=0, 0us
DpListRemove: remove elem 19 from tmadm_inuse_list
DpListRemove: 19 elems in tmadm_inuse_list
DpListInsert: insert elem 19 into tmadm_free_list (at begin)
DpListInsert: 182 elems in tmadm_free_list
SemRel( 4, 1 ) enter
SemRel( 4, 1 ) exit rtc=0, 0us
DpHalt: wait for end of work processes
DpHalt: wait for end of gateway
kill(12538,0) successful -> process alive
DpHalt: waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=16
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jun 7 11:46:49 2012
NiISelect: TIMEOUT occured (1000ms)
kill(12538,0) -> ESRCH: process died
DpHalt: wait for end of icman
kill(12539,0) successful -> process alive
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=16
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jun 7 11:46:50 2012
NiISelect: TIMEOUT occured (1000ms)
kill(12539,0) successful -> process alive
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=16
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jun 7 11:46:51 2012
NiISelect: TIMEOUT occured (1000ms)
kill(12539,0) successful -> process alive
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=16
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jun 7 11:46:52 2012
NiISelect: TIMEOUT occured (1000ms)
kill(12539,0) successful -> process alive
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=16
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jun 7 11:46:53 2012
NiISelect: TIMEOUT occured (1000ms)
kill(12539,0) successful -> process alive
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=16
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jun 7 11:46:54 2012
NiISelect: TIMEOUT occured (1000ms)
kill(12539,0) successful -> process alive
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=16
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jun 7 11:46:55 2012
NiISelect: TIMEOUT occured (1000ms)
kill(12539,0) successful -> process alive
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=16
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jun 7 11:46:56 2012
NiISelect: TIMEOUT occured (1000ms)
kill(12539,0) successful -> process alive
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=16
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jun 7 11:46:57 2012
NiISelect: TIMEOUT occured (1000ms)
kill(12539,0) successful -> process alive
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=16
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jun 7 11:46:58 2012
NiISelect: TIMEOUT occured (1000ms)
kill(12539,0) successful -> process alive
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=16
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jun 7 11:46:59 2012
NiISelect: TIMEOUT occured (1000ms)
kill(12539,0) successful -> process alive
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=16
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jun 7 11:47:00 2012
NiISelect: TIMEOUT occured (1000ms)
kill(12539,0) successful -> process alive
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=16
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jun 7 11:47:01 2012
NiISelect: TIMEOUT occured (1000ms)
kill(12539,0) successful -> process alive
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=16
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jun 7 11:47:03 2012
NiISelect: TIMEOUT occured (1000ms)
kill(12539,0) -> ESRCH: process died
kill(12540,0) successful -> process alive
DpHalt: wait for end of J2EE server
kill(12540,0) successful -> process alive
DpHalt: waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=16
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jun 7 11:47:04 2012
NiISelect: TIMEOUT occured (1000ms)
kill(12540,0) successful -> process alive
DpHalt: waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=16
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jun 7 11:47:05 2012
NiISelect: TIMEOUT occured (1000ms)
kill(12540,0) successful -> process alive
DpHalt: waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=16
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jun 7 11:47:06 2012
NiISelect: TIMEOUT occured (1000ms)
kill(12540,0) successful -> process alive
DpHalt: waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=16
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jun 7 11:47:07 2012
NiISelect: TIMEOUT occured (1000ms)
kill(12540,0) successful -> process alive
DpHalt: waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=16
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jun 7 11:47:08 2012
NiISelect: TIMEOUT occured (1000ms)
kill(12540,0) successful -> process alive
DpHalt: waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=16
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jun 7 11:47:09 2012
NiISelect: TIMEOUT occured (1000ms)
kill(12540,0) successful -> process alive
DpHalt: waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=16
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jun 7 11:47:10 2012
NiISelect: TIMEOUT occured (1000ms)
kill(12540,0) successful -> process alive
DpHalt: waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=16
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jun 7 11:47:11 2012
NiISelect: TIMEOUT occured (1000ms)
kill(12540,0) successful -> process alive
DpHalt: waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=16
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jun 7 11:47:12 2012
NiISelect: TIMEOUT occured (1000ms)
kill(12540,0) successful -> process alive
DpHalt: waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=16
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jun 7 11:47:13 2012
NiISelect: TIMEOUT occured (1000ms)
kill(12540,0) successful -> process alive
DpHalt: waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=16
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jun 7 11:47:14 2012
NiISelect: TIMEOUT occured (1000ms)
kill(12540,0) successful -> process alive
DpHalt: waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=16
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jun 7 11:47:15 2012
NiISelect: TIMEOUT occured (1000ms)
kill(12540,0) successful -> process alive
DpHalt: waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=16
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jun 7 11:47:16 2012
NiISelect: TIMEOUT occured (1000ms)
kill(12540,0) successful -> process alive
DpHalt: waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=16
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jun 7 11:47:17 2012
NiISelect: TIMEOUT occured (1000ms)
kill(12540,0) successful -> process alive
DpHalt: waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=16
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jun 7 11:47:18 2012
NiISelect: TIMEOUT occured (1000ms)
kill(12540,0) successful -> process alive
DpHalt: waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=16
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jun 7 11:47:19 2012
NiISelect: TIMEOUT occured (1000ms)
kill(12540,0) successful -> process alive
DpHalt: waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=16
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jun 7 11:47:20 2012
NiISelect: TIMEOUT occured (1000ms)
kill(12540,0) successful -> process alive
DpHalt: waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=16
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jun 7 11:47:21 2012
NiISelect: TIMEOUT occured (1000ms)
kill(12540,0) successful -> process alive
DpHalt: waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=16
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jun 7 11:47:22 2012
NiISelect: TIMEOUT occured (1000ms)
kill(12540,0) successful -> process alive
DpHalt: waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=16
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jun 7 11:47:23 2012
NiISelect: TIMEOUT occured (1000ms)
kill(12540,0) successful -> process alive
DpHalt: waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=16
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jun 7 11:47:24 2012
NiISelect: TIMEOUT occured (1000ms)
kill(12540,0) successful -> process alive
DpHalt: waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=16
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jun 7 11:47:25 2012
NiISelect: TIMEOUT occured (1000ms)
kill(12540,0) successful -> process alive
DpHalt: waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=16
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jun 7 11:47:26 2012
NiISelect: TIMEOUT occured (1000ms)
kill(12540,0) successful -> process alive
DpHalt: waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=16
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jun 7 11:47:27 2012
NiISelect: TIMEOUT occured (1000ms)
kill(12540,0) successful -> process alive
DpHalt: waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=16
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jun 7 11:47:28 2012
NiISelect: TIMEOUT occured (1000ms)
kill(12540,0) successful -> process alive
DpHalt: waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=16
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jun 7 11:47:29 2012
NiISelect: TIMEOUT occured (1000ms)
kill(12540,0) successful -> process alive
DpHalt: waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=16
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jun 7 11:47:30 2012
NiISelect: TIMEOUT occured (1000ms)
kill(12540,0) successful -> process alive
DpHalt: waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=16
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jun 7 11:47:31 2012
NiISelect: TIMEOUT occured (1000ms)
kill(12540,0) successful -> process alive
DpHalt: waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=16
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jun 7 11:47:32 2012
NiISelect: TIMEOUT occured (1000ms)
kill(12540,0) successful -> process alive
DpHalt: waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=16
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jun 7 11:47:33 2012
NiISelect: TIMEOUT occured (1000ms)
kill(12540,0) successful -> process alive
DpHalt: waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=16
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jun 7 11:47:34 2012
NiISelect: TIMEOUT occured (1000ms)
kill(12540,0) successful -> process alive
DpHalt: waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=16
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jun 7 11:47:35 2012
NiISelect: TIMEOUT occured (1000ms)
kill(12540,0) successful -> process alive
DpHalt: waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=16
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jun 7 11:47:36 2012
NiISelect: TIMEOUT occured (1000ms)
kill(12540,0) successful -> process alive
DpHalt: waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=16
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jun 7 11:47:37 2012
NiISelect: TIMEOUT occured (1000ms)
kill(12540,0) successful -> process alive
DpHalt: waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=16
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jun 7 11:47:38 2012
NiISelect: TIMEOUT occured (1000ms)
kill(12540,0) successful -> process alive
DpHalt: waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=16
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jun 7 11:47:39 2012
NiISelect: TIMEOUT occured (1000ms)
kill(12540,0) successful -> process alive
DpHalt: waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=16
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jun 7 11:47:40 2012
NiISelect: TIMEOUT occured (1000ms)
kill(12540,0) successful -> process alive
DpHalt: waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=16
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jun 7 11:47:41 2012
NiISelect: TIMEOUT occured (1000ms)
kill(12540,0) successful -> process alive
DpHalt: waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=16
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jun 7 11:47:42 2012
NiISelect: TIMEOUT occured (1000ms)
kill(12540,0) successful -> process alive
DpHalt: waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=16
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jun 7 11:47:43 2012
NiISelect: TIMEOUT occured (1000ms)
kill(12540,0) successful -> process alive
DpHalt: waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=16
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jun 7 11:47:44 2012
NiISelect: TIMEOUT occured (1000ms)
kill(12540,0) successful -> process alive
DpHalt: waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=16
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jun 7 11:47:45 2012
NiISelect: TIMEOUT occured (1000ms)
kill(12540,0) successful -> process alive
DpHalt: waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=16
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jun 7 11:47:46 2012
NiISelect: TIMEOUT occured (1000ms)
kill(12540,0) successful -> process alive
DpHalt: waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=16
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jun 7 11:47:47 2012
NiISelect: TIMEOUT occured (1000ms)
kill(12540,0) successful -> process alive
DpHalt: waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=16
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jun 7 11:47:48 2012
NiISelect: TIMEOUT occured (1000ms)
kill(12540,0) successful -> process alive
DpHalt: waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=16
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jun 7 11:47:49 2012
NiISelect: TIMEOUT occured (1000ms)
kill(12540,0) successful -> process alive
DpHalt: waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=16
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jun 7 11:47:50 2012
NiISelect: TIMEOUT occured (1000ms)
kill(12540,0) successful -> process alive
DpHalt: waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=16
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jun 7 11:47:51 2012
NiISelect: TIMEOUT occured (1000ms)
kill(12540,0) successful -> process alive
DpHalt: waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=16
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jun 7 11:47:52 2012
NiISelect: TIMEOUT occured (1000ms)
kill(12540,0) successful -> process alive
DpHalt: waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=16
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jun 7 11:47:53 2012
NiISelect: TIMEOUT occured (1000ms)
kill(12540,0) successful -> process alive
DpHalt: waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=16
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jun 7 11:47:54 2012
NiISelect: TIMEOUT occured (1000ms)
kill(12540,0) successful -> process alive
DpHalt: waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=16
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jun 7 11:47:55 2012
NiISHello,
I think I have the same issue but not the same problem. I started an sld to lmdb synchronisation and after that the system broke down and i had to stop it. But after the restart the disp+work.exe always was yellow and then grey (stopped). Before the synchronisation it worked fine, all was green.
Here ist my trace list:
trc file: "dev_disp", trc level: 1, release: "721"
sysno 00
sid SLM
systemid 562 (PC with Windows NT)
relno 7210
patchlevel 0
patchno 332
intno 20020600
make multithreaded, Unicode, 64 bit, optimized
profile \\fsrvsolman01\sapmnt\SLM\SYS\profile\SLM_DVEBMGS00_fsrvsolman01
pid 4648
kernel runs with dp version 139000(ext=121000) (@(#) DPLIB-INT-VERSION-139000-UC)
length of sys_adm_ext is 592 bytes
*** SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 4648) [dpxxdisp.c 1323]
shared lib "dw_xml.dll" version 332 successfully loaded
shared lib "dw_xtc.dll" version 332 successfully loaded
shared lib "dw_stl.dll" version 332 successfully loaded
shared lib "dw_gui.dll" version 332 successfully loaded
shared lib "dw_mdm.dll" version 332 successfully loaded
shared lib "dw_rndrt.dll" version 332 successfully loaded
shared lib "dw_abp.dll" version 332 successfully loaded
shared lib "dw_sym.dll" version 332 successfully loaded
shared lib "dw_aci.dll" version 332 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3901
rdisp/dynamic_wp_check : 1
rdisp/calculateLoadAverage : 1
Tue Dec 09 10:44:27 2014
*** WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 6525]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
display_tcp_ip: 0
Set Check Logoff Flags to 0x0
DpIPCInit2: write dp-profile-values into sys_adm_ext
DpIPCInit2: start server >fsrvsolman01_SLM_00 <
DpShMCreate: sizeof(wp_adm) 63168 (2256)
DpShMCreate: sizeof(tm_adm) 5517056 (27448)
DpShMCreate: sizeof(wp_ca_adm) 64000 (64)
DpShMCreate: sizeof(appc_ca_adm) 64000 (64)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/1392064/1392080
DpShMCreate: sizeof(comm_adm) 1392080 (2768)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (296)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (80)
DpShMCreate: sizeof(vmc_adm) 0 (2160)
DpShMCreate: sizeof(wall_adm) (41664/42896/64/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: sizeof(j2ee_adm) 3952
DpShMCreate: SHM_DP_ADM_KEY (addr: 0000000002E20050, size: 7203136)
DpShMCreate: allocated sys_adm at 0000000002E20060
DpShMCreate: allocated wp_adm_list at 0000000002E230B0
DpShMCreate: allocated wp_adm at 0000000002E232A0
DpShMCreate: allocated tm_adm_list at 0000000002E32970
DpShMCreate: allocated tm_adm at 0000000002E329C0
DpShMCreate: allocated wp_ca_adm at 00000000033758D0
DpShMCreate: allocated appc_ca_adm at 00000000033852E0
DpShMCreate: allocated comm_adm at 0000000003394CF0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 00000000034E8AD0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated gw_adm at 00000000034E8B80
DpShMCreate: allocated j2ee_adm at 00000000034E8BC0
DpShMCreate: allocated ca_info at 00000000034E9B40
DpShMCreate: allocated wall_adm at 00000000034E9BD0
Tue Dec 09 10:44:28 2014
DpCommAttachTable: attached comm table (header=0000000003394CF0/ft=0000000003394D00)
DpSysAdmIntInit: initialize sys_adm
rdisp/test_roll : roll strategy is DP_NORMAL_ROLL
dia token check not active (15 token)
MBUF state OFF
DpCommInitTable: init table for 500 entries
DpRqQInit: keep protect_queue / slots_per_queue 0 / 4001 in sys_adm
rdisp/queue_size_check_value : -> on,50,30,40,500,50,500,80
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> EsILock: use Mutex for locking
<ES> InitFreeList
<ES> block size is 4096 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 1023 blocks reserved for free list.
ES initialized.
mm.dump: set maximum dump mem to 192 MB
mm.dump: set global maximum dump mem to 192 MB
EsRegisterEmCheck: Register EmGetEsHandles at 00007FF6010B5640
DpVmcSetActive: set vmc state DP_VMC_NOT_ACTIVE
MPI: dynamic quotas disabled.
MPI init: pipes=4000 buffers=1279 reserved=383 quota=10%
J2EE server info
start = TRUE
state = STARTED
pid = 7620
argv[0] = D:\usr\sap\SLM\DVEBMGS00\exe\jcontrol.EXE
argv[1] = D:\usr\sap\SLM\DVEBMGS00\exe\jcontrol.EXE
argv[2] = pf=\\fsrvsolman01\sapmnt\SLM\SYS\profile\SLM_DVEBMGS00_fsrvsolman01
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=65000
argv[5] = -DSAPSYSTEM=00
argv[6] = -DSAPSYSTEMNAME=SLM
argv[7] = -DSAPMYNAME=fsrvsolman01_SLM_00
argv[8] = -DSAPPROFILE=\\fsrvsolman01\sapmnt\SLM\SYS\profile\SLM_DVEBMGS00_fsrvsolman01
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 4.0.1 4.0.1 5.1) [dpxxdisp.c 1709]
***LOG Q0K=> DpMsAttach, mscon ( fsrvsolman01) [dpxxdisp.c 12939]
MBUF state LOADING
DpStartStopMsg: send start message (myname is >fsrvsolman01_SLM_00 <)
DpStartStopMsg: start msg sent to message server o.k.
CCMS: Initialized monitoring segment of size 60000000.
CCMS: Initialized CCMS Headers in the shared monitoring segment.
CCMS: Checking Downtime Configuration of Monitoring Segment.
CCMS: AlMsUpload called by wp 1024.
Tue Dec 09 10:44:29 2014
CCMS: AlMsUpload successful for D:\usr\sap\SLM\DVEBMGS00\log\ALMTTREE.DAT (2221 MTEs).
Tue Dec 09 10:44:30 2014
CCMS: start to initalize 3.X shared alert area (first segment).
DpJ2eeLogin: j2ee state = CONNECTED
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1296]
MBUF state ACTIVE
DpWpBlksLow: max wp blocks in queue is 800 (80 %)
MBUF component UP
DpMsgProcess: 1 server in MBUF
DpAppcBlksLow: max appc blocks in queue is 500 (50 %)
Tue Dec 09 10:44:51 2014
***LOG Q0I=> NiIRead: P=127.0.0.1:51741; L=127.0.0.1:65000: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 5082]
*** ERROR => NiIRead: SiRecv failed for hdl 33/sock 1172
(SI_ECONN_BROKEN/10054; I4; ST; P=127.0.0.1:51741; L=127.0.0.1:65000) [nixxi.cpp 5082]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=7620)
*** ERROR => DpProcKill: kill failed [dpntdisp.c 397]
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Tue Dec 09 10:45:08 2014
*** ERROR => DpHdlDeadWp: W0 (pid 4720) died (severity=0, status=0) [dpxxwp.c 1746]
*** ERROR => DpHdlDeadWp: W1 (pid 6920) died (severity=0, status=0) [dpxxwp.c 1746]
*** ERROR => DpHdlDeadWp: W2 (pid 1908) died (severity=0, status=0) [dpxxwp.c 1746]
*** ERROR => DpHdlDeadWp: W3 (pid 5852) died (severity=0, status=0) [dpxxwp.c 1746]
*** ERROR => DpHdlDeadWp: W4 (pid 6528) died (severity=0, status=0) [dpxxwp.c 1746]
*** ERROR => DpHdlDeadWp: W5 (pid 4076) died (severity=0, status=0) [dpxxwp.c 1746]
*** ERROR => DpHdlDeadWp: W6 (pid 6824) died (severity=0, status=0) [dpxxwp.c 1746]
*** ERROR => DpHdlDeadWp: W7 (pid 5940) died (severity=0, status=0) [dpxxwp.c 1746]
*** ERROR => DpHdlDeadWp: W8 (pid 7796) died (severity=0, status=0) [dpxxwp.c 1746]
*** ERROR => DpHdlDeadWp: W9 (pid 5564) died (severity=0, status=0) [dpxxwp.c 1746]
*** ERROR => DpHdlDeadWp: W10 (pid 6048) died (severity=0, status=0) [dpxxwp.c 1746]
*** ERROR => DpHdlDeadWp: W11 (pid 7612) died (severity=0, status=0) [dpxxwp.c 1746]
*** ERROR => DpHdlDeadWp: W12 (pid 5208) died (severity=0, status=0) [dpxxwp.c 1746]
*** ERROR => DpHdlDeadWp: W13 (pid 5088) died (severity=0, status=0) [dpxxwp.c 1746]
*** ERROR => DpHdlDeadWp: W14 (pid 5752) died (severity=0, status=0) [dpxxwp.c 1746]
*** ERROR => DpHdlDeadWp: W15 (pid 8184) died (severity=0, status=0) [dpxxwp.c 1746]
*** ERROR => DpHdlDeadWp: W16 (pid 6500) died (severity=0, status=0) [dpxxwp.c 1746]
*** ERROR => DpHdlDeadWp: W17 (pid 6560) died (severity=0, status=0) [dpxxwp.c 1746]
*** ERROR => DpHdlDeadWp: W18 (pid 4984) died (severity=0, status=0) [dpxxwp.c 1746]
*** ERROR => DpHdlDeadWp: W19 (pid 5840) died (severity=0, status=0) [dpxxwp.c 1746]
*** ERROR => DpHdlDeadWp: W20 (pid 4064) died (severity=0, status=0) [dpxxwp.c 1746]
*** ERROR => DpHdlDeadWp: W21 (pid 4920) died (severity=0, status=0) [dpxxwp.c 1746]
*** ERROR => DpHdlDeadWp: W22 (pid 1476) died (severity=0, status=0) [dpxxwp.c 1746]
*** ERROR => DpHdlDeadWp: W23 (pid 4340) died (severity=0, status=0) [dpxxwp.c 1746]
*** ERROR => DpHdlDeadWp: W24 (pid 4324) died (severity=0, status=0) [dpxxwp.c 1746]
*** ERROR => DpHdlDeadWp: W25 (pid 4212) died (severity=0, status=0) [dpxxwp.c 1746]
*** DP_FATAL_ERROR => DpWPCheck: no more work processes
*** DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1189
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Dec 09 10:45:18 2014
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Tue Dec 09 09:45:18 2014
========================
No Type Pid Status Cause Start Rstr Err Sem Time Program Cl User Action Table
0 DIA -1 Ended no no 1 0 0 NO_ACTION
1 DIA -1 Ended no no 1 0 0 NO_ACTION
2 DIA -1 Ended no no 1 0 0 NO_ACTION
3 DIA -1 Ended no no 1 0 0 NO_ACTION
4 DIA -1 Ended no no 1 0 0 NO_ACTION
5 DIA -1 Ended no no 1 0 0 NO_ACTION
6 DIA -1 Ended no no 1 0 0 NO_ACTION
7 DIA -1 Ended no no 1 0 0 NO_ACTION
8 DIA -1 Ended no no 1 0 0 NO_ACTION
9 DIA -1 Ended no no 1 0 0 NO_ACTION
10 DIA -1 Ended no no 1 0 0 NO_ACTION
11 DIA -1 Ended no no 1 0 0 NO_ACTION
12 DIA -1 Ended no no 1 0 0 NO_ACTION
13 DIA -1 Ended no no 1 0 0 NO_ACTION
14 DIA -1 Ended no no 1 0 0 NO_ACTION
15 UPD -1 Ended no no 1 0 0 NO_ACTION
16 UPD -1 Ended no no 1 0 0 NO_ACTION
17 UPD -1 Ended no no 1 0 0 NO_ACTION
18 BTC -1 Ended no no 1 0 0 NO_ACTION
19 BTC -1 Ended no no 1 0 0 NO_ACTION
20 BTC -1 Ended no no 1 0 0 NO_ACTION
21 BTC -1 Ended no no 1 0 0 NO_ACTION
22 BTC -1 Ended no no 1 0 0 NO_ACTION
23 SPO -1 Ended no no 1 0 0 NO_ACTION
24 UP2 -1 Ended no no 1 0 0 NO_ACTION
25 UP2 -1 Ended no no 1 0 0 NO_ACTION
Dispatcher Queue Statistics Tue Dec 09 09:45:18 2014
===========================
+------+--------+--------+--------+------------+------------+
| Typ | now | high | max | writes | reads |
+------+--------+--------+--------+------------+------------+
| NOWP | 0 | 2 | 4000 | 6 | 6 |
+------+--------+--------+--------+------------+------------+
| DIA | 4 | 4 | 4000 | 4 | 0 |
+------+--------+--------+--------+------------+------------+
| UPD | 0 | 0 | 4000 | 0 | 0 |
+------+--------+--------+--------+------------+------------+
| ENQ | 0 | 0 | 4000 | 0 | 0 |
+------+--------+--------+--------+------------+------------+
| BTC | 0 | 0 | 4000 | 0 | 0 |
+------+--------+--------+--------+------------+------------+
| SPO | 0 | 0 | 4000 | 0 | 0 |
+------+--------+--------+--------+------------+------------+
| UP2 | 0 | 0 | 4000 | 0 | 0 |
+------+--------+--------+--------+------------+------------+
max_rq_id 9
wake_evt_udp_now 0
wake events total 7, udp 7 (100%), shm 0 ( 0%)
since last update total 7, udp 7 (100%), shm 0 ( 0%)
DpGetLoadAverage: la1[1] = 0.000000 / -1.000000 %
DpGetLoadAverage: la5[1] = 0.000000 / -1.000000 %
DpGetLoadAverage: la15[1] = 0.044444 / -1.000000 %
Dispatcher Load Statistics
+------+---------+---------+---------+
| Typ | LA1 | LA5 | LA15 |
+------+---------+---------+---------+
| DIA | 0.000 | 0.000 | 0.044 |
+------+---------+---------+---------+
DpGetLoadAverage: la1[2] = 0.000000 / -1.000000 %
DpGetLoadAverage: la5[2] = 0.000000 / -1.000000 %
DpGetLoadAverage: la15[2] = 0.000000 / -1.000000 %
| UPD | 0.000 | 0.000 | 0.000 |
+------+---------+---------+---------+
DpGetLoadAverage: la1[3] = 0.000000 / -1.000000 %
DpGetLoadAverage: la5[3] = 0.000000 / -1.000000 %
DpGetLoadAverage: la15[3] = 0.000000 / -1.000000 %
| ENQ | 0.000 | 0.000 | 0.000 |
+------+---------+---------+---------+
DpGetLoadAverage: la1[4] = 0.000000 / -1.000000 %
DpGetLoadAverage: la5[4] = 0.000000 / -1.000000 %
DpGetLoadAverage: la15[4] = 0.000000 / -1.000000 %
| BTC | 0.000 | 0.000 | 0.000 |
+------+---------+---------+---------+
DpGetLoadAverage: la1[5] = 0.000000 / -1.000000 %
DpGetLoadAverage: la5[5] = 0.000000 / -1.000000 %
DpGetLoadAverage: la15[5] = 0.000000 / -1.000000 %
| SPO | 0.000 | 0.000 | 0.000 |
+------+---------+---------+---------+
DpGetLoadAverage: la1[6] = 0.000000 / -1.000000 %
DpGetLoadAverage: la5[6] = 0.000000 / -1.000000 %
DpGetLoadAverage: la15[6] = 0.000000 / -1.000000 %
| UP2 | 0.000 | 0.000 | 0.000 |
+------+---------+---------+---------+
Dump of tm_adm structure: Tue Dec 09 09:45:18 2014
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Tue Dec 09 09:45:18 2014
=============================
Slots: 1000, Used: 1, Max: 2
+------+--------------+----------+-------------+
| id | owner | pid | eyecatcher |
+------+--------------+----------+-------------+
| 0 | DISPATCHER | -1 | 0xdeadbeef |
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1189
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Dec 09 10:45:23 2014
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >fsrvsolman01_SLM_00 < (normal)
DpJ2eeDisableRestart
DpMBufRead: read server list from MBUF (1 entries)
DpMBufMod: name [fsrvsolman01_SLM_00 ], types 187 state 3 (0x0 0x0 0x0 0x0)
DpMBufMod: call hooks for event MBUF_DPEVT_DSTATE (5->3)
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 60
AdCallRegisteredCvtToExt: opcode 60 call 00007FF6003A7AA0
AdCallRegisteredCvtToExt: opcode 60 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 00007FF600D23F90
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 00007FF600D23F90
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 00007FF600D23F90
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 00007FF600D23F90
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 00007FF600D23F90
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 00007FF600D23F90
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 00007FF600D23F90
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 00007FF600D23F90
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 00007FF600D23F90
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 00007FF600D23F90
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
DpWpBlksLow: wp_blks_in_queue/threshold/max = 1/800/1000
DpLockWpBlkEx: lock wp ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqIPutIntoQ: put elem in queue DIA, elems=5
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 10)
MBUF server state SHUTDOWN
DpModState: change state STARTING -> SHUTDOWN
NiBufSend starting
NiIWrite: hdl 25 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
DpHalt: switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
DpHalt: stop work processes
DpHalt: stop gateway
killing process (7608) (SOFT_KILL)
DpHalt: stop icman
killing process (5648) (SOFT_KILL)
DpHalt: terminate gui connections
DpHalt: wait for end of work processes
DpHalt: wait for end of gateway
[DpProcDied] Process lives (PID:7608 HANDLE:908)
DpHalt: waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1189
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Dec 09 10:45:24 2014
NiISelect: TIMEOUT occured (1000ms)
*** ERROR => [DpProcDied] Process died (PID:7608 HANDLE:908 rc:0x0) [dpnttool2.c 147]
DpHalt: wait for end of icman
[DpProcDied] Process lives (PID:5648 HANDLE:916)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1189
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Dec 09 10:45:25 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:5648 HANDLE:916)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1189
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Dec 09 10:45:26 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:5648 HANDLE:916)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1189
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Dec 09 10:45:27 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:5648 HANDLE:916)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1189
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Dec 09 10:45:28 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:5648 HANDLE:916)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1189
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Dec 09 10:45:29 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:5648 HANDLE:916)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1189
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Dec 09 10:45:30 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:5648 HANDLE:916)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1189
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Dec 09 10:45:31 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:5648 HANDLE:916)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1189
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Dec 09 10:45:32 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:5648 HANDLE:916)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1189
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Dec 09 10:45:33 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:5648 HANDLE:916)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1189
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Dec 09 10:45:34 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:5648 HANDLE:916)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1189
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Dec 09 10:45:35 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:5648 HANDLE:916)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1189
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Dec 09 10:45:36 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:5648 HANDLE:916)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1189
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Dec 09 10:45:37 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:5648 HANDLE:916)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1189
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Dec 09 10:45:38 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:5648 HANDLE:916)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1189
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Dec 09 10:45:39 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:5648 HANDLE:916)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1189
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Dec 09 10:45:40 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:5648 HANDLE:916)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1189
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Dec 09 10:45:41 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:5648 HANDLE:916)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1189
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Dec 09 10:45:42 2014
NiISelect: TIMEOUT occured (1000ms)
*** ERROR => [DpProcDied] Process died (PID:5648 HANDLE:916 rc:0x0) [dpnttool2.c 147]
*** ERROR => [DpProcDied] Process died (PID:7620 HANDLE:912 rc:0x42) [dpnttool2.c 147]
DpStartStopMsg: send stop message (myname is >fsrvsolman01_SLM_00 <)
DpStartStopMsg: Write AD_STARTSTOP message with type= 0, name=fsrvsolman01_SLM_00 , sapsysnr= 0, hostname=fsrvsolman01
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 60
AdCallRegisteredCvtToExt: opcode 60 call 00007FF6003A7AA0
AdCallRegisteredCvtToExt: opcode 60 exit rc=SAP_O_K
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 4
AdCallRegisteredCvtToExt: opcode 4 call 00007FF600628390
AdCallRegisteredCvtToExt: opcode 4 exit rc=SAP_O_K
DpConvertRequest: net size = 189 bytes
NiBufIAlloc: malloc MSLIB-BUF, to 32110 bytes
NiBufSend starting
NiIWrite: hdl 25 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
MsISndTypeOnce: send msg (ms hdr/msg 110/452 bytes) to MSG_SERVER, type 1
DpStartStopMsg: stop msg sent to message server o.k.
NiBufIAlloc: malloc MSLIB-BUF, to 32110 bytes
NiBufIAlloc: malloc NIBUF-IN, to 32110 bytes
NiIRead: hdl 25 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 25
NiBufReceive starting
MsINiRead: received 274 bytes
MsIReceive: received msg (ms hdr/msg 110/164 bytes), flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 25 recv would block (errno=EAGAIN)
NiIRead: read for hdl 25 timed out (0ms)
DpHalt: more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 25 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
MsISnd2: send msg (ms hdr/msg 110/4 bytes) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiBufIAlloc: malloc MSLIB-BUF, to 32110 bytes
NiBufIAlloc: malloc NIBUF-IN, to 32110 bytes
NiIRead: hdl 25 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 25
NiBufReceive starting
MsINiRead: received 114 bytes
MsIReceive: received msg (ms hdr/msg 110/4 bytes), flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsISendKeepalive : keepalive sent to message server
NiIRead: hdl 25 recv would block (errno=EAGAIN)
Tue Dec 09 10:45:43 2014
NiIPeek: peek for hdl 25 timed out (r; 1000ms)
NiIRead: read for hdl 25 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
DpHalt: detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 13339]
NiBufSend starting
NiIWrite: hdl 25 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server (fsrvsolman01 / 3901)
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 25 in set0
SiSelNSet: set events of sock 1060 to: ---
NiBufISelRemove: remove hdl 25 from set0
SiSelNRemove: removed sock 1060 (pos=3)
SiSelNRemove: removed sock 1060
NiSelIRemove: removed hdl 25
DpDelSocketInfo: del info for nihdl 25 (pos/type=3/4)
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 60
AdCallRegisteredCvtToExt: opcode 60 call 00007FF6003A7AA0
AdCallRegisteredCvtToExt: opcode 60 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 00007FF600D23F90
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 00007FF600D23F90
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
DpWpBlksLow: wp_blks_in_queue/threshold/max = 2/800/1000
DpLockWpBlkEx: lock wp ca_blk 2
make DISP owner of wp_ca_blk 2
DpRqIPutIntoQ: put elem in queue DIA, elems=6
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 13)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 25/sock 1060
NiBufIClose: clear extension for hdl 25
MsIDetach: detach MS-system (fsrvsolman01 / 3901)
DpHalt: cleanup EM
EsCleanup( )
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 4648) [dpxxdisp.c 11819]
DpHalt: Good Bye ..... -
Photobooth works for one second, then stops.
It used to work. Like all the time.
I'm using a Logitech camera, which works fine in Skype and iChat. But when I open Photobooth, the camera turns on, works for a period of one second, then it stops. If Photobooth is open but behind another program, when I switch back to Photobooth I get a quick one second refresh of the image before it freezes up again.
When I Apple-T, I get the 3-2-1 countdown, then it takes a picture of the frozen image and adds it to the previous photos.
The camera is plugged into a USB 2.0 card I installed last year. Everything else on the card is working. I've even switched ports around, and everything is working (which makes sense, because the camera works in Skype and iChat.)
I was hoping to use the video function to record some voiceover stuff and then transfer the audio into iMovie.I would try Repair Permissions.
This is done with Disk Utility found in Applications/Utilities using the First AID tab.
If that does not work I would Reset the PRAM
Hold down AppleALT+PR keys on restart until you have three start up bongs.
If that does not work I would download and install the Combo Installer of the OS level you are up to.
10.5.6 COMBO is here
9:00 PM Thursday; February 26, 2009 -
Airplay and iTunes, works for 1 minute then stops
I have
iTunes 11.0.5.5
Airport Express 802.11g version number 6.3
Airport Express 802.11n version number 7.6.4
I have used Windows 8 to install a previous version of Utility in order to set up the older airport express as it wont work on mountain lion (thanks Apple)
it's now recognised and I can play music via the iPad, but when i try to do multi room via the PC, it initially didn't work at all, but i read about changing to just WPA2 which i did and that actually gave me multi room, until i tested it and turned it off and on a few times, it then stopped finding it through iTunes and telling me it was in use.
I actually thought I'd fixed it and could answer loads of the other support questions on here, but it looks like i'm in the same position.
that split second i had multi room - pure bliss
Can any one get me past this hurdle, I thought i was doing so wellHi benkeenan2005,
you could have a look at the "AirPlay Multiroom Player by WHAALE" iPad app which brings support for Multiroom audio on the iPad directly (without the need for a Mac or PC running).
Currently it supports playing iTunes music on up to 6 speakers simultaneously.
Please try the free App "AirPlay Speaker Tester" first to see if it is working with your current setup.
regards
Ulrich -
why am i getting 'your purchase cannot be completed' when gifting apps. It worked for 3 purchases then stopped
Pete, you have found like many before you, that eventually software becomes out of date, where software developers at different points no longer support old versions of their product, which eventually fossilizes your computer. It is inevitable.
You have heard of dog years, well computer years are even shorter, which makes your seven year old laptop certainly middle aged. It is still useful, running the applications it always has, so keep it. But online its years will show.
With the internet, new software developments affect browsers, and plugins, with java, flash etc.
Software development is often in step with hardware innovation, and most Apple hardware is not very upgradable and Apple don't support things for very long.
This leaves you with a an old PowerBook that will still be good for the things it does, though it will have increasing limitations with some modern internet media sites.
Mozilla no longer support 10.4 Tiger but fortunately there is a group who have kept it alive with their version of Firefox,
http://www.floodgap.com/software/tenfourfox/
Check it out, it may be just what your need. -
Mail exchange stop working after the latest upgrade, how do you reboot it to restart again
Mail exchange stop working after the latest upgrade, how do you reboot it to restart again
Hmmm, here's the opposite problem/fix...
Gmail send but not receive...
Here are two steps that have come in handy in related situations
1) login to gmail on your computer or device via a web browser
2) once logged in successfully, go to this URL to unlock:
https://www.google.com/accounts/DisplayUnlockCaptch
Is your gMail POP or IMAP?
If IMAP...
Is the Outgoing server smtp.gmail.com, port 25, SSL on, & Authentication = Password -
I've even tried only having the iPad mini on the router but that's not even worked. Safari works but the apps are the worst and its what I use most.
Hi Friends,
I found the solution for this problem (because I faced it too): go to Settings>>General>>Reset>>Reset Internet Settings (the third option in IOS 6).
Five minutes later my iPhone 4S works fine again.
If the issue persists, forget the wifi connection, then sign in again.
Hope it helps -
ITunes 8.0 only Plays One Song at a Time, then Stops! AARGH!
Someone, please help. I have tried everything I can think of, to no avail.
For some reason, when I play a song in my Music Library on my laptop iTunes 8.0, it stops playing after each song. When the song ends, iTunes stops; it does not move to the next song in my library, it just stops. I have to click on the next song to play that song, and when that song is done it stops.
I have tried creating Music Playlists, does not help. I have tried checking and unchecking the Repeat and Shuffle options, still nothing.
This does not happen on my iPods, only when I play songs in my Music Library on iTunes from my laptop.
If you have any suggestions for a solution, please tell me. I am beyond frustrated having to click on the next song every time.I have the same problem with iTunes only playing one track at a time. It didn't use to be this way ... and seems to have developed after one of the recent updates (late December 2008).
I did, however, find that the problem was "solved" by checkmarking all the tracks that I expect to hear played. However, this won't work for me because ... as it has always been in the past ... I use these check boxes to tell iTunes which tracks to synchronize to my iPod. Since my desktop library is many times larger than can be loaded onto my iPod, I obviously cannot check all of the tracks.
Since when did these check marks become **ALSO** a signal to tell iTunes what tracks to play continuously on iTunes?!?
Previously, I have **ONLY** used these check-marks to signal to iTunes the tracks that should be synchronized to my iPod.
If the foregoing advice (check-marking all songs to be played continuously on **iTunes** ... then it would appear that the programmers have introduced a conflict of functions in the iTunes user interface.
The check-mark system is a simple and intuitive method to select which tracks to synchronize to the iPod ... it is not at all intuitive that you would be expected to check these **SAME** check-boxes to play tracks on the iTunes desktop.
Generally, when listening to music at home on iTunes, I prefer to listen to albums as published from the first track to the last track. Occasionally, I may wish to shuffle tracks within an album or within a genre.
However, when on the go, I sometimes shuffle music entirely. In any event, I cannot possibly download my entire library onto my iPod because of memory limitations.
In conclusion, I do not wish to tamper with my check-marks ... I know, at any time, how much memory is currently in use on my iPod and so can add and/or delete check-boxes to adjust the tracks from my iTunes main library that are played on my iPod.
Of course, then, I am massively frustrated that I cannot listen to albums continuously without messing-up my iPod library selections.
This was never a problem before ... why has this behavior changed?
This could, of course be resolved if the Apple development team added a command "Continuous Play" [On] or [Off] ... say under the [Controls] menu, logically placed above the "Shuffle" menu item.
Comments?
Does anyone on the Apple iTunes development team monitor this discussion? -
Older accessories work w/ iphone 3GS, then stop working?
So about a month ago the office moved from samsung smartphones to the iPhone 3Gs. sweet.
When I first got it, I did some testing with the existing ipod accessories I have - a sony radio/alarm clock, and the headunit adapter I have for my mazda.
The alarm clock worked fine with the exception of the "airplane mode warning" and the car adapter worked similarly but wouldn't charge. Fine with me, I'll use the classic on long trips anyway.
But about a week and a half ago, I noticed that the alarm clock had stopped working normally. It would charge but not play music, using the clock's buzzer instead of playing my wake up music.
Then today I plugged the iphone into the car for the first time in a couple weeks, and it started playing music when plugged in, but only through the phone's tinny internal speakers. Nothing I could do would route it through the car audio system.
What could cause the iphone to suddenly stop feeding line-out to accessories? Anybody seen this before?
Apologies if this has bee posted before, I did scan through a few pages of posts before posting.
Thanks.
P.S. Make itunes 9 work with XPx64. Please.Have you tried to restore it?
-
Printer works for a while, then stops
I have an HP Photosmart D5460 printer which I bought on Black Friday that operates on a USB port. I was on here before because I couldn't get the printer to print anything. At that time, it needed a high speed USB driver. I did a search for one downloaded it on my computer, and then put in the installer cd for the printer to reinstall it.
After that, it printed fine. But now, it's not working. It's telling me that there is no printer installed. I don't know how many times I've installed that printer. It also acts like I didn't even install the USB driver.
The type of Windows version I use is Windows Vista.hallo
I have a photosmart C148x. It stops while printering. In the mean time on the display of the machine it says printing.....
Maybe you are looking for
-
How can I back up my hard drive, I am quite new to the Mac world. Can I revert to it after a Hard drive format? Thanks a lot all the best Rafcio
-
Any one have any idea how to set up the planning layout for WBS ELEMENTS,COST CENTER,? We are trying to plan for WBS elements and Cost center through CJR2 but I dont have any layout designed for this. Any ideas or suggestions?
-
Hi guys, I've been having a look through the system log and have have seen the following message come up a few times: jnl: journal start/end pointers reset! What does this mean, and should I be worried? Thanks
-
I just got this computer today, everything works fine but I cannot connect to the internet. The Wi-Fi thing in the top right corner tells me that im connected, but when I try to open Safari, it says that I am not able to connect to the internet. I ha
-
Apex 4.0.2 See http://apex.oracle.com/pls/apex/f?p=24317:79 Both regions have a button that submits the page with the following URL javascript:apex.confirm('Are you sure?',{request:'FOO',showWait:true});The one at the top of the page works fine. But