VPP and Configurator drama

I have 20 VPP codes for iMovie, and I attempted to use those codes to put iMove on my classroom iPads.
After going through the steps, the  code document notes 20 codes are redeeemed. Yet, not a single machine ever had iMovie on it. Also, Configurator is accepting what the document says and it saying there are no codes available either.
My guess is I need to unredeeem these codes somehow and start from scratch. But I am stumped on how to do it since there was no real redemption.
Any help would be appreciated!!!
Thanks,
JMSLab

Hi bonfire99,
Re-download the VPP spreadsheet from Apple. Re-import the codes into Apple Configurator. Try syncing again. The reason to do this is that Apple Configurator doesn't actually "use" the codes. It is just keeping a record of the codes. You do use one code in iTunes on the computer to download the initial .ipa file. But when you re-import the new VPP code spreadsheet into Apple Configurator it should show that you have all codes available as long as you are using the same Apple ID in iTunes that you are in Apple Configurator. (the key word here being "should")
If this doesn't work, contact VPP for Education support. Explain your situation and ask them to restore your VPP code(s). They will. Here's the online form: https://ssl.apple.com/support/itunes/vpp-edu/
You can also try calling VPP for Education Support at 1-800-800-2775.
Hope this helps. Good luck!!
~Joe

Similar Messages

  • Apple VPP and Configurator

    I currently am managing 30 iPads at my school. I have paid for 30 copies of an app. When I open up configurator, if I want to install this app on all 30 iPads, where do I download the app from. At this point, I have put in one of my 30 redemtion codes into iTunes on my computer, downloaded the app to iTunes, taken the file from iTunes and put it in Apple Configurator. The problem is, now I can only install the app on 29 devices (as it is assuming that I have already used one of the codes). I need to know how to download a paid app, without having to use one of my redemtion codes to simply get it to my computer so that I can use it in configurator. Obviously, this is not how apple intends me to use one of my redemtion codes; however, I see no other way.

    Hi bonfire99,
    Re-download the VPP spreadsheet from Apple. Re-import the codes into Apple Configurator. Try syncing again. The reason to do this is that Apple Configurator doesn't actually "use" the codes. It is just keeping a record of the codes. You do use one code in iTunes on the computer to download the initial .ipa file. But when you re-import the new VPP code spreadsheet into Apple Configurator it should show that you have all codes available as long as you are using the same Apple ID in iTunes that you are in Apple Configurator. (the key word here being "should")
    If this doesn't work, contact VPP for Education support. Explain your situation and ask them to restore your VPP code(s). They will. Here's the online form: https://ssl.apple.com/support/itunes/vpp-edu/
    You can also try calling VPP for Education Support at 1-800-800-2775.
    Hope this helps. Good luck!!
    ~Joe

  • VPP and Apple Configurator

    We started our iPad deployment with just a few iPads.  We bought some VPP and use them to install apps on a few devices.  Now we have added to the group of iPads to make it a cart of 20.  We are going to start using configurator to setup and manage them.  Is it possible to take the codes we have used on the first iPads and move them over to Apple Configurator so we can deploy the apps that way?

    My understanding is you need to have deployed in supervisor mode on the ipad to get the code back.  You may want to talk to your apple salesperson to discuss alternative ways of getting the codes back.
    These pages will not answer your question.
    Excellent guide. See announcment post -- https://discussions.apple.com/thread/4256735?tstart=0
    https://docs.google.com/document/d/1SMBgyzONxcx6_FswgkW9XYLpA4oCt_2y1uw9ceMZ9F4/ edit?pli=1
    good tips for initial deployment:
    https://discussions.apple.com/message/18942350#18942350
    https://discussions.apple.com/thread/3804209?tstart=0

  • I purchased 20 copies of the King of Math App in VPP and downloaded the codes but it doesn't show up in Apple Configurator. What do I do now?

    I purchased 20 copies of the King of Math App in VPP and downloaded the codes but it doesn't show up in Apple Configurator. What do I do now?App not showing

    If you click View, Show Sidebar you will see the other libraries under Shared in the left hand column. Click on the Library you want and you can expand it to select Music, Movies etc. Select whatever items you want and click import if you want to move them to your Library.
    You will have to have all computers authorised with the relevant Apple ID's
    Store  >  Authorise this computer...
    This is separate from the Home Sharing username and password and is to allow playing of DRM Movies, TV shows etc from the other computer.
    If both Computers use the same apple id this step is not required.

  • IOS 7 Update and Configurator Problems

    Since the iOS 7 update, we have been unable to 'Check In' devices with Configurator, and refreshing devices has been difficult.  We have iPad 2s and Configurator 1.3.1 running on Mac OS 10.7.5.  Sometimes the message is, "Could not create a backup", and sometimes the message is, "Unable to fetch a list of installed apps". Is anyone else having the same problems? 
    We have updated all software - OS, Configurator, iTunes, and all iOS Apps.  We have 4 paid apps (iMovie, Pages, Keynote and Configurator), and no free apps for the VPP account on each iPad.  Each iPad is named and assigned to one student.  Students have their own iTunes account to add free apps as needed.  The only way I have found that this works without error is to delete the student name from "Assign", but then I can't transfer any of their information when a device has problems. I have tried this with devices that are not having any problems to make sure it is not related to other problems.  These problems did not exist until the iOS 7 update.  Hopefully a Configurator update will be on the way soon?

    andrewgodin wrote:
    Here is what worked for me in dealing with this hot mess.
    Using iTunes, I went to each individual iPad and restored it to factory settings.  Takes about 5 minutes per iPad. 
    When it was done, I didn't set it up as a new iPad, I simply clicked the "eject" button so it no longer appeared in my list, which prevented me from restoring the same iPad twice and wasting time.
    Once all of them were done, which took an entire day, I opened up the updated version of configurator.  All of the iPads restored and installed the apps that I need and the problem was solved.
    Did this about five minutes ago.  Time will tell if it sticks, but for now, they are fixed.
    You could probably try to downgrade your iOS7 cart back to iOS6, that's what I ended up doing.

  • Diff b/w alert Categories and configurations

    Hi Experts,
    Could you please help me here, what is diff b/w Alert Categories and configurations.
    Ans also what is the use of Container elements in Categories.
    You ans is very helpful for me.
    Thanks in Advance all.
    Regards,
    Madhu.

    Hi Madhu,
    In Alert configuration alert rules are defined based on Alert Categories. So Alert Categories has defined using t code ALRTCATDEF. Container Elements fetches the appropriate dynamic message base on the container variable. 
    Go through the below doc:
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/00e97ba2-85ce-2b10-20bc-bc05cd172154?QuickLink=index&…
    Regards,
    Krupa

  • I have LabView but I do not have the Calibration and Configuration Palette,and I could not download it, how can I download it or if i cannot,can I work with the NI-DAQ Calibration_1200?

    I have read in a tutorial for the board 1200 that I can calibrate it with the Calibration and Configuration Palette in LabVIEW, but I do not have them and I could not download it to access its libraries, so I can only download the NI-DAQ software,What's my best choice and if it is to download the palette with its libraries, how can download it with them?I'd appreciate your answers

    If you wish to use your 1200 device in LabVIEW, you must download and install NI-DAQ. When you install NI-DAQ, it will ask you if you would like to install support for LabVIEW. By installing this support, you will then have access to the DAQ pallette in LabVIEW. The DAQ pallette requires that you have NI-DAQ installed.
    For more information on installing and using your device, you can refer to the DAQ Quick Start Guide. You can download it from:
    http://digital.ni.com/manuals.nsf/14807683e3b2dd8f8625677b006643f0/0eca53fe80911b1f862568560068295d
    Regards,
    Erin

  • How to properly create and configure SharePoint 2013 Search service with PowerShell?

    Hello Forum,
    I have installed SharePoint 2013 across three tier servers:
    WFE Server  (Of course, SharePoint is installed here. Bsically this is just a Web server)
    APP Server  (Of course, SharePoint is installed here + Central Admin + Service Apps).
    SQL Server  
    I now want to create and configure the Search service, obviously on the APP Server, But of course the search functionality should work correctly on the WFE server to.
    I want to do this via a proper PowerShell script. I found Spence Harbar's script on: (http://www.harbar.net/articles/sp2013mt.aspx), But it has three problems, and they are as follows:
    1) Spence Harbar himself literally stated on his article that this script is for: "deploying on a single server farm", But what if I have three tier servers? Could anyone please help me out in suggesting the required tweaks in the
    script?
    2) By default Search uses the SP_Farm account, So, How can I change the script to use other dedicated account for the search service e.g. SP_SearchAcc ?
    3) How can I modify the script to specify a default Search center?
    4) Apart from all the three aforementioned point - Is the script missing anything? 
    I would greatly appreciate your inputs - Thanks !

    the only differences are where you place the components.  if you are doing a small server farm with a 1-1-1, most likely you just need to change the script so that you set the index and query processing component on the front end, but the others on
    the app server.  just a 2 second update... just keep in mind this will work, but I am making several assumptions without any knowledge of your farm, users, capabilities. 
    generally, there would be more of a breakout on the topology than that, but im guessing for this farm that you wont have dedicated search servers.  also, a lot depends on # users (rps really), # items in index, size of VMs (RAM for query processing,
    Disk for index, etc, etc), and making sure the topology works for your particular environment and needs. 
    if you want more detailed topology help, which aligns as closely as possible to "best practices" (not that those exist in SharePoint, go ahead and provide the total # users, average/peak RPS for search, current index size, content source types,
    VM specs RAM, CPU, #/Size of drives, HA concerns/priority (obviously isn't, since only 1-1-1)
    Christopher Webb | MCM: SharePoint 2010 | MCSM: SharePoint Charter | MCT | http://christophermichaelwebb.com

  • VCenter SRM Installation and Configuration

    Hello,
    We have installed and configured SRM 5.5.1 in Main site and DR site. In DR site we have two hosts and no shared storage.
    Each have one vsphere replication appliance deployed and both the sites connected and we have also replicated two virtual machines successfully.
    Next step we have configured protection group and recovery plan as well.
    But when we test a recovery plan it gives a error "unable to access virtual machine configuration file"
    Is it necessary we must have a shared storage? Can't we use local datastore on each host to power on the machines.
    Regards
    Karthik

    Hi,
    No, shared storage is not required:
    Array/ vendor types
    Requires same storage replication solution at both sites (eg. EMC RecoverPoint, NetApp vFiler, IBM SVC, etc)
    Can support any storage solution at either end including local storage as long as it is covered by the vSphere HCL
    SRM - Array Based Replication vs. vSphere Replication | VMware vSphere Blog - VMware Blogs
    Michael.

  • Ibase and configuration error while creating a Service Contract

    Hi,
    I am creating a Service Contract programatically and not manually through the T-code CRMD_ORDER.
    I am using the Function module CRMXIF_ORDER_SAVE for the same as the FM BAPI_BUSPROCESSND_CREATEMULTI and CRM_ORDER_MAINTAIN did not work for me because of the number of parameters that needs to be passed for creating the Service contract.
    The Service contract does get created but there are errors corresponding to the Point of delivery and configuration missing.
    The error corresponding to the point of delivery says "IS-U:allocate a point of delivery to the item" even though I am passing the values in the REF_OBJECTS field of the CRMXIF_BUSTRANS_ITEM structure.
    Structure for the same is :
    ls_objects_i-TYPE_REF_OBJ = 'B'.
      ls_objects_i-object_task = 'I'.
      ls_objects_i-PRODUCT_GUID = lv_product_guid.
      ls_objects_i-PRODUCT_ID = p_product_id.
      ls_objects_i-IBASE_COMP_GUID = ls_output-IBASE_GUID.
      ls_objects_i-IB_INSTANCE = 1582.
      ls_objects_i-IB_COMP_VALID = '20070926093651'.
      ls_objects_i-SERIAL_NUMBER = '0102 46CC9C278B92025BE10000000AD5920E'.
      append ls_objects_i to lt_objects_i.
      p_ls_item-REF_OBJECT-data = lt_objects_i.
      p_ls_item-REF_OBJECT-datax = 'X'.
    Similarly,the error for the configuration says "Configuration for the item missing" and here again I am passing the values in the CONFIGURATION structure.
    Structure for this is :
      p_ls_item-configuration-data-consist = 'T'.
      p_ls_item-configuration-data-kbname = 32.
      p_ls_item-configuration-data-kbvers = '0.0'.
      p_ls_item-configuration-data-kbprofile = 'E_H_B'.
      p_ls_item-configuration-data-complete = 'T'.
      p_ls_item-configuration-data-spras = 'E'.
      p_ls_item-configuration-data-cfginfo = 'VCOND=VARIANT_CONDITION_KEY'
      ls_cuins-OBJ_TYPE = 'SERV'.
      ls_cuins-class_type = 300.
      ls_cuins-obj_key = 'E_H_B'.
      ls_cuins-obj_txt = 'E_H_B'.
      ls_cuins-QUANTITY = '1.0'.
      ls_cuins-COMPLETE = 'T'.
      ls_cuins-CONSIST = 'T'.
      append ls_cuins to lt_cuins.
      ls_config_i-instance = lt_cuins.
      p_ls_item-configuration-data = ls_config_i.
      p_ls_item-configuration-datax = 'X'.
      clear ls_config_i.
      ls_cuval-charc = 'DISCOUNT_EUR'.
      ls_cuval-charc_txt = 'DISCOUNT_EUR'.
      ls_cuval-value = '0.0'.
    ls_cuval-value_txt
      append ls_cuval to lt_cuval.
      ls_instance-value = lt_cuval.
      insert ls_instance into table lt_instance.
    ls_config_i-instance = lt_instance.
    p_ls_item-configuration-data = ls_config_i.
    p_ls_item-configuration-datax = 'X'.
    clear ls_config_i.
    Kindly help if anyone has worked on this.......
    Regards,
    Puneet Jhari.

    Hi,
    I am creating a Service Contract programatically and not manually through the T-code CRMD_ORDER.
    I am using the Function module CRMXIF_ORDER_SAVE for the same as the FM BAPI_BUSPROCESSND_CREATEMULTI and CRM_ORDER_MAINTAIN did not work for me because of the number of parameters that needs to be passed for creating the Service contract.
    The Service contract does get created but there are errors corresponding to the Point of delivery and configuration missing.
    The error corresponding to the point of delivery says "IS-U:allocate a point of delivery to the item" even though I am passing the values in the REF_OBJECTS field of the CRMXIF_BUSTRANS_ITEM structure.
    Structure for the same is :
    ls_objects_i-TYPE_REF_OBJ = 'B'.
      ls_objects_i-object_task = 'I'.
      ls_objects_i-PRODUCT_GUID = lv_product_guid.
      ls_objects_i-PRODUCT_ID = p_product_id.
      ls_objects_i-IBASE_COMP_GUID = ls_output-IBASE_GUID.
      ls_objects_i-IB_INSTANCE = 1582.
      ls_objects_i-IB_COMP_VALID = '20070926093651'.
      ls_objects_i-SERIAL_NUMBER = '0102 46CC9C278B92025BE10000000AD5920E'.
      append ls_objects_i to lt_objects_i.
      p_ls_item-REF_OBJECT-data = lt_objects_i.
      p_ls_item-REF_OBJECT-datax = 'X'.
    Similarly,the error for the configuration says "Configuration for the item missing" and here again I am passing the values in the CONFIGURATION structure.
    Structure for this is :
      p_ls_item-configuration-data-consist = 'T'.
      p_ls_item-configuration-data-kbname = 32.
      p_ls_item-configuration-data-kbvers = '0.0'.
      p_ls_item-configuration-data-kbprofile = 'E_H_B'.
      p_ls_item-configuration-data-complete = 'T'.
      p_ls_item-configuration-data-spras = 'E'.
      p_ls_item-configuration-data-cfginfo = 'VCOND=VARIANT_CONDITION_KEY'
      ls_cuins-OBJ_TYPE = 'SERV'.
      ls_cuins-class_type = 300.
      ls_cuins-obj_key = 'E_H_B'.
      ls_cuins-obj_txt = 'E_H_B'.
      ls_cuins-QUANTITY = '1.0'.
      ls_cuins-COMPLETE = 'T'.
      ls_cuins-CONSIST = 'T'.
      append ls_cuins to lt_cuins.
      ls_config_i-instance = lt_cuins.
      p_ls_item-configuration-data = ls_config_i.
      p_ls_item-configuration-datax = 'X'.
      clear ls_config_i.
      ls_cuval-charc = 'DISCOUNT_EUR'.
      ls_cuval-charc_txt = 'DISCOUNT_EUR'.
      ls_cuval-value = '0.0'.
    ls_cuval-value_txt
      append ls_cuval to lt_cuval.
      ls_instance-value = lt_cuval.
      insert ls_instance into table lt_instance.
    ls_config_i-instance = lt_instance.
    p_ls_item-configuration-data = ls_config_i.
    p_ls_item-configuration-datax = 'X'.
    clear ls_config_i.
    Kindly help if anyone has worked on this.......
    Regards,
    Puneet Jhari.

  • Install and configure report service on Oracle Application Server 10g

    i want to know how to install and configure report service on Oracle Application Server 10g Release 3 (10.1.3.1.0)
    Thanks

    the case is that we developed an ADF Application, so we want to deploy it on the latest version of Oracle Application server.
    our application communicate with Oracle reports (run oracle reports from our Application) as there are no Oracle report products for JEE Application.
    so if there are not report service that can run on Oracle Application Server 10g Release 3 (10.1.3.1.0),
    what is the other choices that oracle supports that can help us in this case ???

  • EIS Installation and Configuration

    Hi Everybody,
    I am trying to install EIS 9.31 on my laptop (i.e Win2k3 Server), I have successfully installed Essbase and EIS
    But I have no idea how to configure(Creating DSN Catalog) in EIS.
    I am using Oracle 10g. Can any one please help me on thsi installation.
    Already I gone through the installation document but I didn't understand how to configure.
    If anyone having installation and Configuring Screen shots please send me to my mail
    Mail Id: [email protected]
    This is very urgent I need to give presentation on the EIS
    Thanks in Advance for your help
    Awaiting for your quick Response

    I'm not sure what version of software you are looking to install, but for 9.3.1, we just installed our application server (Weblogic), installed Shared Services, supplied the database info and we were good to go. I do believe; however, your mileage will vary depending on the application server you use as some of them have an option for 'automatic' installation and some are manual. (I went the 'automatic' route) You will need to refer to the installation documentation for all of the relevant details, though.

  • What is BDI or BDS spelled out? Jabber for Mac 9.2(1) Installation and Configuration Guide

    I’m spending the day catching up on Jabber/IM&P release notes across the server/clients.
    So I’m used to EDI and UDS, but we have a new acronym in the Jabber for Mac 9.2(1) Installation and Configuration Guide called BDI and BDS. However they don’t define what BDI stands for other than BDI is LDAP for non-windows
    Clients and suggests it should be used for Jabber for Mac.
    What is BDI or BDS spelled out? Something directory integration, but what is the B ?
    Then to add to the mix they reference BDS which sounds like the old UDS (is UDS changing to BDS?)
    How can Jabber get any more confusing…
    I also noted in the  Jabber Video for iPad 9.3.4 release notes that Apple is removing the Always Connect option in the near future. Manually launching Cisco AnyConnect Secure Mobility Client before making a call. This is going to upset some customers who like how Lync uses https and just works from anywhere with enhanced directory integration…

    Basic Directory Integration. It's not new, we had it in the Windows clients as far back as CUPC. The distinction got introduced when EDI was introduced, relying on Windows ADSI APIs instead of the client making a native LDAP bind.
    To my knowledge BDI/BDS are the same thing; I'm guessing S is 'service'. UDS remains unchanged.
    I also noted in the  Jabber Video for iPad 9.3.4 release notes that Apple is removing the Always Connect option in the near future.
    Well, they lost a patent infringement lawsuit and chose to change the functionality instead of pay the troll. That's not Jabber's fault. Collaboration Edge will be the way to avoid this in the near future.
    Please remember to rate helpful responses and identify helpful or correct answers.

  • Configuration Failed Error while running the Shareoint 2010 Products and Configuration wizard in windows 7

    Hi Techys,
    Kindly help me to resolve the below issue
    "Configuration Failed Error while running the Shareoint 2010 Products and Configuration wizard in windows 7"
    Many Thanks,
    Madhu

    Hi,
    Follow this link for smooth installation for SP 2010 on Win 7.
    http://msdn.microsoft.com/en-us/library/office/ee554869(v=office.14).aspx
    Murugesa Pandian.,MCTS|App.Development|Configure

  • Install and configuration on the SharePoint server 2007 issue

    Hi All,
               I have Microsoft Sharepoint 2007 on Windows 2003 and I am trying to Integrate Adobe Lifecycle Rights Management Server which is on Windows 2008 R2 server.
              I am trying to Install and configuration on the SharePoint server 2007 but during installation getting error "Failure adding assembly to the cache: Unknown Error"
    Please check the Edited install.bat file and error log.
    Install.bat
    set _my_datetime=%date% %time%
    @echo on
    echo Begin Installation at %_my_datetime%
    echo "Customize <VER> <PORT> <SharepointServerNameOrIP> <SiteDirectory> <siteName> in this install.bat . Verify gacutil.exe path."
    @echo off
    @SET GACUTILEXE="C:\WINDOWS\Microsoft.NET\Framework\v1.1.4322\gacutil.exe"
    @SET TEMPLATEDIR="C:\Program Files\Common Files\Microsoft Shared\web server extensions\12\TEMPLATE"
    @SET RESOURCESDIR="C:\Program Files\Common Files\Microsoft Shared\web server extensions\12\Resources"
    @SET WEBAPPDIR="C:\Inetpub\wwwroot\wss\VirtualDirectories\80"
    @SET SITEURL="http://sharepoint7:80/sites/DCADC"
    @SET STSADM="C:\Program Files\Common Files\Microsoft Shared\web server extensions\12\BIN\STSADM.EXE"
    REM      cd $(ProjectDir)
    %GACUTILEXE% /nologo /i AdobeLCSharepoint.dll /f
    %GACUTILEXE% /nologo /i AdobeLiveCycleConnector.dll /f
    %GACUTILEXE% /nologo /i AdobeLiveCycleWorkflow.dll /f
    pushd %TEMPLATEDIR%\features
          Echo Deactivating LiveCycle Connector feature with WSS
          %STSADM% -o deactivatefeature -filename  LiveCycle\feature.xml  -url %SITEURL% -force
          Echo Deactivating LiveCycle Workflow feature with WSS
          %STSADM% -o deactivatefeature -name LiveCycle/Workflow -url %SITEURL% -force
          Echo Uninstalling LiveCycle Connector with WSS
          %STSADM% -o uninstallfeature -filename  LiveCycle\feature.xml -force
          Echo Uninstalling LiveCycle Workflow with WSS
          %STSADM% -o uninstallfeature -name  LiveCycle/Workflow -force
    popd
          Echo Copying source files to WSS \TEMPLATE directory
          xcopy TEMPLATE %TEMPLATEDIR% /e /y /i
          Echo Copying Feature Resource files to WSS 12\Resources directory
          xcopy Resources %RESOURCESDIR% /e /y /i
          Echo Copying Resource files to %WEBAPPDIR%\App_GlobalResources directory
          xcopy App_GlobalResources %WEBAPPDIR%\App_GlobalResources /e /y /i
    pushd %TEMPLATEDIR%\features
          Echo Installing LiveCycle Connector  with WSS
          %STSADM% -o installfeature -filename  LiveCycle\feature.xml -force
          Echo Installing LiveCycle Workflow with WSS
          %STSADM% -o installfeature -name  LiveCycle/Workflow -force
          Echo Activating LiveCycle Connector  with WSS
          %STSADM% -o activatefeature -filename  LiveCycle\feature.xml  -url %SITEURL% -force
          Echo Activating LiveCycle Workflow with WSS
          %STSADM% -o activatefeature -name LiveCycle/Workflow -url %SITEURL% -force
    popd
          Echo Restarting IIS worker process
          IISRESET
    set _my_datetime=%date% %time%
    @echo on
    echo End Installation at %_my_datetime%
    @echo off
    Error Log
    E:\Adobe LiveCycle Connector-2007>set _my_datetime=Wed 08/22/2012 14:40:28.27
    E:\Adobe LiveCycle Connector-2007>echo Begin Installation at Wed 08/22/2012 14:40:28.27 
    Begin Installation at Wed 08/22/2012 14:40:28.27
    E:\Adobe LiveCycle Connector-2007>echo "Customize <VER> <PORT> <SharepointServerNameOrIP> <SiteDirectory> <siteName> in this install.bat . Verify gacutil.exe path."
    "Customize <VER> <PORT> <SharepointServerNameOrIP> <SiteDirectory> <siteName> in this install.bat . Verify gacutil.exe path."
    Failure adding assembly to the cache: Unknown Error
    Failure adding assembly to the cache: Unknown Error
    Failure adding assembly to the cache: Unknown Error
    Deactivating LiveCycle Connector feature with WSS
    Operation completed successfully.
    Deactivating LiveCycle Workflow feature with WSS
    Operation completed successfully.
    Uninstalling LiveCycle Connector with WSS
    Operation completed successfully.
    Uninstalling LiveCycle Workflow with WSS
    Operation completed successfully.
    Copying source files to WSS \TEMPLATE directory
    TEMPLATE\FEATURES\LiveCycle\Elements.xml
    TEMPLATE\FEATURES\LiveCycle\Feature.xml
    TEMPLATE\FEATURES\LiveCycle\Workflow\feature.xml
    TEMPLATE\FEATURES\LiveCycle\Workflow\workflow.xml
    TEMPLATE\IMAGES\LiveCycle\applyPolicy.png
    TEMPLATE\IMAGES\LiveCycle\applyReaderExtn.png
    TEMPLATE\IMAGES\LiveCycle\createPdf.png
    TEMPLATE\IMAGES\LiveCycle\liveCycle.gif
    TEMPLATE\IMAGES\LiveCycle\pdficon_small.gif
    TEMPLATE\LAYOUTS\LiveCycle\ApplyPolicy.aspx
    TEMPLATE\LAYOUTS\LiveCycle\ApplyReaderExtensions.aspx
    TEMPLATE\LAYOUTS\LiveCycle\GeneratePDF.aspx
    TEMPLATE\LAYOUTS\LiveCycle\InvokeGenericProcess.aspx
    TEMPLATE\LAYOUTS\LiveCycle\LiveCycleSettings.aspx
    TEMPLATE\LAYOUTS\LiveCycle\LoggingSettings.aspx
    TEMPLATE\LAYOUTS\LiveCycle\Workflow\LCWorkflowSettings.aspx
    16 File(s) copied
    Copying Feature Resource files to WSS 12\Resources directory
    Resources\AdobeLiveCycleConnectorCore.de-DE.resx
    Resources\AdobeLiveCycleConnectorCore.de.resx
    Resources\AdobeLiveCycleConnectorCore.en-US.resx
    Resources\AdobeLiveCycleConnectorCore.en.resx
    Resources\AdobeLiveCycleConnectorCore.fr-FR.resx
    Resources\AdobeLiveCycleConnectorCore.fr.resx
    Resources\AdobeLiveCycleConnectorCore.ja-JP.resx
    Resources\AdobeLiveCycleConnectorCore.ja.resx
    Resources\AdobeLiveCycleConnectorCore.resx
    9 File(s) copied
    Copying Resource files to "C:\Inetpub\wwwroot\wss\VirtualDirectories\80"\App_GlobalResources directory
    App_GlobalResources\AdobeLiveCycleConnector.de-DE.resx
    App_GlobalResources\AdobeLiveCycleConnector.de.resx
    App_GlobalResources\AdobeLiveCycleConnector.en-US.resx
    App_GlobalResources\AdobeLiveCycleConnector.en.resx
    App_GlobalResources\AdobeLiveCycleConnector.fr-FR.resx
    App_GlobalResources\AdobeLiveCycleConnector.fr.resx
    App_GlobalResources\AdobeLiveCycleConnector.ja-JP.resx
    App_GlobalResources\AdobeLiveCycleConnector.ja.resx
    App_GlobalResources\AdobeLiveCycleConnector.resx
    App_GlobalResources\AdobeLiveCycleWorkflow.de-DE.resx
    App_GlobalResources\AdobeLiveCycleWorkflow.de.resx
    App_GlobalResources\AdobeLiveCycleWorkflow.en-US.resx
    App_GlobalResources\AdobeLiveCycleWorkflow.en.resx
    App_GlobalResources\AdobeLiveCycleWorkflow.fr-FR.resx
    App_GlobalResources\AdobeLiveCycleWorkflow.fr.resx
    App_GlobalResources\AdobeLiveCycleWorkflow.ja-JP.resx
    App_GlobalResources\AdobeLiveCycleWorkflow.ja.resx
    App_GlobalResources\AdobeLiveCycleWorkflow.resx
    18 File(s) copied
    Installing LiveCycle Connector  with WSS
    Operation completed successfully.
    Installing LiveCycle Workflow with WSS
    Operation completed successfully.
    Activating LiveCycle Connector  with WSS
    Operation completed successfully.
    Activating LiveCycle Workflow with WSS
    Operation completed successfully.
    Restarting IIS worker process
    Attempting stop...
    Internet services successfully stopped
    Attempting start...
    Internet services successfully restarted
    E:\Adobe LiveCycle Connector-2007>echo End Installation at Wed 08/22/2012 14:41:00.29 
    End Installation at Wed 08/22/2012 14:41:00.29
    Waiting...
    Regards,
    Amol Sahare

    This might be an issue with the gacutil that you are using. I have used the gacutil that comes with Microsoft SDK.
    You can install Microsoft SDK from http://www.microsoft.com/en-us/download/details.aspx?id=3138

Maybe you are looking for