VPP Distribution issues with OSX Server Profile Manager

Hi, I have a new issue with my OSX 10.9.5 Server. I use VPP to distribute apps to users devices, when I would add a new user I would send them an invitation message through /profilemanager . All was working well until recenetly , the message still arrives in the users mailbox however when you click the "sign in" link on the "receive apps and books from xxxxx" email instead of opening through the Mac App store app it now opens Safari and connects to the profile manager server , any ideas ? it never has done this before and although I thought it was a new feature or method I can not seem to resolve the issue.

Hi if when you are redirected back to your Mac Server you enter the user name and password of the user you are trying to receive VPP apps for i.e the Open Directory credentials it will then open the App Store providing the credentials are correctly entered so it looks like an additional layer of security. The process is click on the link in the VPP invite email, this takes you to your Mac Server profile manager, log on with your OD account, App store then opens on your Mac like it used to.

Similar Messages

Website issue with osx server and hosting

so i had a website hosted from my osx server and i had bought the domain name from godaddy it worked great but i desided to instead of hosting it on my osx server to just host it on godaddy so i turned to server off and added the domain to my godaddy account hosting and now it works but one problem all computers can veiw the website but mine. i think it has somthing to do with the fact that my mac was the one hosting it. but if i go to my browser and go to my wesite i get a error but than i go to any other computer and it works great help please

A couple ideas
check our /etc/hosts file, you might have an entry for your domain.
sudo pico /etc/hosts
     do you see any entries for your domain? If so:
     edit the file by navigating with the arrow keys, delete the line
     with your domain. Hit ctrl-x when done (enter 'y' to save the change)
Clear your DNS cache
     dscacheutil -flushcache
Try a different DNS server, go into your network settings (In System Preferences)
Go to Ethernet or Wifi (whichever you are using), click Advanced and under the DNS tab enter:
     8.8.8.8
Make sure no entries are ABOVE it.
If none of this works, send the results of these commands:
     cat /etc/hosts
     cat /etc/resolv.conf
     dig +short mydomain.com   (replace with your domain)
The results of these should point us in the right direction.
Jeff

Problem with lion server - profile, wiki , postgresql

I have problem with lion server:
- Profile Manager Error Reading Setting
- Wiki Error Reading Setting
org.postgresql.postgres[3163]: postgres_real cannot access the server configuration file "/var/pgsql/postgresql.conf": No such file or directory

I have problem with lion server:
- Profile Manager Error Reading Setting
- Wiki Error Reading Setting
org.postgresql.postgres[3163]: postgres_real cannot access the server configuration file "/var/pgsql/postgresql.conf": No such file or directory

Access Mac Mini Server (profile management) through reverse proxy

Hi,
Newbie in Mac's world and yet trying to make it more complicated as it is.
As we recently (last month) decided to equip our sales force with iPads, they were configured through Apple Configurator tool running on a dedicated Mac Mini Mountain Lion.
Now, I'd be keen in moving this configuration to the Profile Manager, part of the OSx Server plugin. So far so good.
Problem is the following : another web server is already on the LAN using both 80 and 443 ports. So all incoming traffic on those ports was routed to this other server. As Mac Mini Server default http/s ports may not be altered, I installed a reverse proxy server (Oracle VM - Ubuntu 12.04LTS - pound), configured to deal differently traffic on those ports according to the domain name (host) of the web request (header). Each 'local' server has been allocated a domain name. Just to be clear, traffic is now routed by the WAN/LAN router, for those ports, towards the reverse proxy, configured to reroute the traffic to the correct destination.
So far so good, it works like a charm, except... as soon as we enter https protocol on Mac Mini Server Profile Manager.
Access from an iDevice to the Mac Mini Server Profile Manager login page is fine, but as soon as password is confirmed, safari is pending and finally a message 'An internal serer error occured. Please try later again' appears.
Looking to both reverse proxy system log and Mac Mini profilemanager.log files to trace the problem, the following lines are produced at this particular moment :
reverse proxy system.log
Jan 15 14:44:03 reverseproxy pound: 91.... GET /devicemanagement/console/apple_theme_v2/en/da56af0a69e733b259dac3991419fa928b4 94a56/resources/images/sprites/me_controls.png HTTP/1.1 - HTTP/1.1 200 OK
Jan 15 14:44:03 reverseproxy pound: 91.... GET /auth?redirect=http://osxsrv.fiks.net/devicemanagement/api/authentication/callback HTTP/1.1 - HTTP/1.1 302 Moved Temporarily
Jan 15 14:44:04 reverseproxy pound: 91.... GET /devicemanagement/api/authentication/callback?auth_token=336952DE-BDDE-4390-82F 7-8475B79FB2D3 HTTP/1.1 - HTTP/1.1 302 Moved Temporarily
Jan 15 14:44:04 reverseproxy pound: (b7680b40) e500 can't read header
Jan 15 14:44:04 reverseproxy pound: (b7680b40) e500 response error read from 192.168....:443/GET /profilemanager/ HTTP/1.1: Success (0.007 secs)
Jan 15 14:44:08 reverseproxy pound: 91.... POST /devicemanagement/api/magic/get_updated HTTP/1.1 - HTTP/1.1 200 OK
OSx Server profilemanager.log
Jan 15 14:44:05 osxsrv ProfileManager[1748] <Info>: Processing MagicController#do_magic (for 91.... at 2013-01-15 14:44:05) [POST]Jan 15 14:44:05 osxsrv ProfileManager[1749] <Info>: Processing MagicController#do_magic (for 91.... at 2013-01-15 14:44:05) [POST]
Jan 15 14:44:06 osxsrv ProfileManager[1748] <Info>: Completed in 492ms (View: 0, DB: 6) | 200 OK [http://osxsrv.../magic/do_magic]
Jan 15 14:44:06 osxsrv ProfileManager[1749] <Info>: Completed in 687ms (View: 0, DB: 5) | 200 OK [http://osxsrv..../magic/do_magic]
Jan 15 14:44:07 osxsrv ProfileManager[1750] <Info>: auth_token doesn't exist
Jan 15 14:44:07 osxsrv ProfileManager[1750] <Info>: Filter chain halted as [:verify_auth_token] rendered_or_redirected.
Jan 15 14:44:07 osxsrv ProfileManager[1751] <Info>: Processing MagicController#do_magic (for 91.... at 2013-01-15 14:44:07) [POST]
Jan 15 14:44:07 osxsrv ProfileManager[1751] <Info>: auth_token doesn't exist
Jan 15 14:44:07 osxsrv ProfileManager[1751] <Info>: Filter chain halted as [:verify_auth_token] rendered_or_redirected.
Jan 15 14:44:07 osxsrv ProfileManager[1751] <Info>: Completed in 4ms (View: 1, DB: 14) | 403 Forbidden [http://osxsrv..../magic/do_magic]
Jan 15 14:44:07 osxsrv ProfileManager[1748] <Info>: Processing MagicController#do_magic (for 91.... at 2013-01-15 14:44:07) [POST]
Jan 15 14:44:07 osxsrv ProfileManager[1748] <Info>: auth_token doesn't exist
Jan 15 14:44:07 osxsrv ProfileManager[1748] <Info>: Filter chain halted as [:verify_auth_token] rendered_or_redirected.
Jan 15 14:44:07 osxsrv ProfileManager[1748] <Info>: Completed in 45ms (View: 1, DB: 43) | 403 Forbidden [http://osxsrv..../magic/do_magic]
Jan 15 14:44:07 osxsrv ProfileManager[1750] <Info>: Processing MagicController#do_magic (for 91.... at 2013-01-15 14:44:07) [POST]
Jan 15 14:44:07 osxsrv ProfileManager[1750] <Info>: auth_token doesn't exist
Jan 15 14:44:07 osxsrv ProfileManager[1750] <Info>: Filter chain halted as [:verify_auth_token] rendered_or_redirected.
Jan 15 14:44:07 osxsrv ProfileManager[1750] <Info>: Completed in 55ms (View: 0, DB: 1) | 403 Forbidden [http://osxsrv..../magic/do_magic]
Jan 15 14:44:08 osxsrv ProfileManager[1749] <Info>: Processing AuthenticationController#callback (for 91.... at 2013-01-15 14:44:08) [GET]
Jan 15 14:44:08 osxsrv ProfileManager[1749] <Info>: Redirected to https://osxsrv..../profilemanager/
Jan 15 14:44:08 osxsrv ProfileManager[1749] <Info>: Completed in 149ms (DB: 5) | 302 Found [http://osxsrv..../authentication/callback?auth_token=[FILTERED]]
I guess the '302 Found' is causing or explaining the problem.
I agree this might not be a Mac issue, so I still knock your doors hoping some of you could at least give a hint for what to search for !
If the pound configuration file is of interest, just ask, but this is pretty trivial, saying basically listen these protocols (http/https) on these ports (80/443) and according to Header content (check destination host) and reroute packet to LAN device (with given LAN IP address).
As the default port(s) of the Mac Mini Web Services may not be altered (so far I know), I guess I am stuck using 80 and 443 anyway.
Maybe should I invest time in changing my other apache server ports to some more exotic 8080 or 88 or whatever so Mac Mini Server Profile Manager default ports 80 and 443 are maintained and can be easily and directly rerouted to my Mac server without any reverse proxy along the way.
Thanks in advance for your help
Alx

HI All,
i'm also using reverse proxy technique to publish my server to the internet. The ip is used by twice domains. The problem is by using the profile manager
after login it redirects the url to the Local Area network addresse instead to the domain.
How to configure this on OS X Server and the Profile Manager Service?
Kind Regards
Oemer

OSX Server profile losing access to CS2 filters

Hi all,
I'm managing a Mac Lab at a high school. Yesterday two students lost access to PS CS2 profiles... only a few were available to them, not the whole standard set.
I fixed it by creating new profiles for the students. I got a call today from the instructor to learn that two more students have lost access to their filter set.
Trashing the PS preferences did not solve the problem. Does anyone know why this would happen. The fix appears to be creating a new profile within OSX Server Workgroup manager... but I need to track down why this is happening seeing as how it looks to be spreading through the directory of students.
Thanks for any help you can provide.
Alan

Hi Ramon,
Sorry it took so long to get back to you. The e-mail notification that you posted went into my Junk email folder...
We are using roaming profiles in OSX Server. The user logs onto their iMac and the Server loads their working environment onto the computer.
The filter set I'm talking about is the stock filters that come with PS CS2. The students who are having problems only have access (or are allowed to use) a few of those stock filters.
I'm sure that something is corrupting the student's preferences within PS... but trashing the preferences doesn't fix the issue. Only when I create a whole new student profile within OSX Server does it get fixed. But it is happening to more students, so I am trying to get a handle on why/how it is happening.
Thanks for your reply.
Cheers,
Alan

Issues with JMS Server migration

Hi All,
I have issue with JMS server migration.
I have configured clustred environment with 2 Managed server (MS1 & MS2) and with one JMS Server which is running on MS1 and configured for auto migration, when I start both my managed server once and access the application very functionality works fine and when I stop the MS1 the JMS server successfully geting migrated to MS2 and in this scenarion also my application works as expected and when I restart the MS1 and access the application all the functionalities related to MDBs are executed twice.
However once we restart the MS1 we observe that in the monitor tab of MDB the connection status for both managed servers it show as connected.
As a result there is a redundancy when the MDB is executed
I am using Weblogic Server 10.3.0 & normal topics in the MDBs.
Please let me know is this a bug or am I missing any configuration.

Hi Suresh,
There is a "Bug-10007947" in WLS 10.3.0 version which dose not displays the values properly on admin-console once the migration has taken place, however I am assuming that bug may fix your issue so try that out in your test environment. If that dose not work try out the below suggestions.
Suggestion:
- Try the same test on different versions of WLS lower as well as on higher versions compared to WLS 10.3.0 (i.e WLS 9.2.X and WLS 10.3.x) and check what are the result.
- If in any other version your test runes properly, then you can create a simple test case and open a service request with Oracle asking for creating a BUG and let them do their job.
Hope above information helped you.
Regards,
Ravish Mody

OSX server workgroup manager Won't allow me to add a group because it thinks there is already one

OSX server workgroup manager Won't allow me to add a group because it thinks there is already one. Anyone can help with solution.

Worked it out all I had to do was put workgroup manager into local and delete group/s

Compatibility issue with outgoing server; they suggest downloading Thunderbird. Any suggestions?

My internet provider says there is a compatibility issue with outgoing server and suggest downloading Thunderbird. Any comments?

Not without some details from you.
What version of OSX
Who is the mail provider
If not iCloud mail what type is it (POP or Imap)
That's a start.

Pop/Imap retrieving and redistribute in LAN with OsX Server

It's possible to download mail accounts hosted in my isp and redistribut'em in my lan with OsX Server with it's own mail server?
The scope is not to have a local server mail because we have ADSL and sometimes the line broke up...
We prefere have mail hosted more securely in our external isp.
But an internal mail server is a commodity very useful...
Sorry if the questions is answered before...
Thanks in advance.

Maybe not easy but should work:
http://www.macosxhints.com/article.php?story=2002052509542613
man fetchmail

Mac Mini with OSX server still OK?

HI All,
I was going to purchase the mac mini that was geared up to work best with OSX server however that option is now no longer available and the mac mini's have downgraded slightly in terms of quadcore processors and 2tb harddrives.
We run a small design studio, file sharing is becoming a large hinderance on workflow and I thought OSX server sounded like a good solution for someone with little knowledge of the area. We have four imacs, and three macbooks. Our team is growing fairly quick and that number should double next year.
Any ideas would be much appreciated.
Thanks,

Just get the latest mac mini, add some external storage with a Thunderbolt 2 connection and that setup will work great for filesharing.
You will get gigabit network speeds and since it's Thunderbolt 2 the mac mini will have no problem to serve those files across the network.
Make sure you get external storage with a decent RAID setup like a Promise Pegasus for instance, and invest in a good back-up solution.
Then clone your mac mini OSX Server setup daily towards the RAID and you're good to go!
Get a Mac Mini with an SSD or Fusion Drive and 16GB of RAM. That'll keep you going for the next couple of years easy!
Goodluck!
Jeffrey

Help needed with OSX Server 10.5.8

We're running a headless Xserve (RackMac3,1) with OSX Server 10.5.8 that did its job flawlessly.
Now we want to update the Perl software from 5.8.6 to 5.20.0 or newer. After downloading the suitable version from CPAN we tried to install, but get the following msg:
Uh-oh, the C compiler 'cc' doesn't seem to be working.
You need to find a working C compiler.
Either (purchase and) install the C compiler supplied by your OS vendor,
or for a free C compiler try http://gcc.gnu.org/
I cannot continue any further, aborting.
Is there a way to install the missing tools remotely via the command line (SSH)? A step-by-step recipe would be most welcome.
- Harald -

RackMac3,1 is PPC/G5 processor so you are not going to have an easy time with this. Perl 5.2.20 is bleeding edge (OS X 10.10.3 comes with v5.16.3).
I would leave Apple's installation of Perl, etc. on the server strictly alone and install MacPorts:
The MacPorts Project -- Home
and work from there. You aren't likely to get a step-by-step recipe because its not an exercise a rational person would chose to spend time on.
Have you considered rewriting whatever features in your code require Perl 5.2.20 than to upgrade your server? Or buy a new server, you could probably pick up a Mini for about $200.
C.

Memory leak issue with link server between SQL Server 2012 and Oracle

Hi,
We are trying to use the linked server feature with SQL Server 2012 to connect SQL server and Oracle database. We are concerned about the existing memory leak issue. For more context please refer to the link.
http://blogs.msdn.com/b/psssql/archive/2009/09/22/if-you-use-linked-server-queries-you-need-to-read-this.aspx
The above link talks about the issues with SQL Server versions 2005 and 2008, not sure if this is still the case in 2012. I could not find any article that talks about if this issue was fixed by Microsoft in later version.
We know that SQL Server process crashes because of the third-party linked server provider which is loaded inside SQL Server process. If the third-party linked server provider is enabled together with the
Allow inprocess option, the SQL Server process crashes when this third-party linked server experiences internal problems.
We wanted to know if this fixed in SQL Server 2012 ?

So your question is more of a information type or are you really facing OOM issue.
There can be two things for OOM
1. There is bug in SQL Server which is causing the issue which might be fixed in 2012
2. The Linked server provider used to connect to Oracle is not upto date and some patch is missing or more recent version is to be used. Did you made sure that you are using latest version.
What is Oracle version you are trying to connect(9i,10g, R2...)
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Wiki Article
MVP

Issue with Creating Forecast Profiles/Forecasting

Hello Experts,
We are facing an issue with creating forecast profiles.
We have two FYVs defined in our system, one with 52/53 fiscal weeks (Fiscal Variant W1) and the other with 12 fiscal months (FYV M1), Our storage buckets profile (STP) uses W1, since we have many dataviews that use W1 as the FYV in the attached Planning buckets profile(PBP). We also have dataviews that display in fiscal months (use FYV M1 in the attached PBP), data from Fiscal weeks will be aggregated and shown in Fiscal months . We need to do forecasting using FYV M1, that is forecast in Fiscal Months , but since the storage bucket profile has W1 which is used in the Planning Area config. We are unable to create any Forecast profiles with FYV M1 . Please note that we cannot use M1 in STP because when we used M1 in STP, we could not create dataviews in fiscal weeks (using W1)
1. Is there any way we can forecast using M1 while having assinged W1 to the Planning area/STP ?
2. OR we are willing to assing M1 to PA, provided we can use W1 in some of the dataviews, unfortunately we were unable to do this, though the vice versa is possible i,e. we could have W1 in STP and M1 in some of the related PBPs/ Weekly Dataviews.
Please let me know if any of these are possible or if there is any alternative way to do forecasting in Fisc Months.
Thanks
Tej

Hi,
You are correct, the Storage bucket profile always has to be at a detailed level. Time bucket profile can be at higher levels like monthly, quarterly etc.,
Coming to the root of your problem, which is you are unable to forecast at a level other that what is specified in your Storage bucket profile, unfortunately the answer is no.
You can do a forecast only at the level at which the data is stored and not at the level at which the data is viewed.
One work around for this is to create an additional planning area with the same MPOS and this addl PA can contain only those bare minimum KF required for your forecast. After you generate your forecast, you can copy it to your Weeks based PA and then proceed from there. This copy of KF between PA is much faster as it will happen at LC level and should not cause time delays.
NOTE - You have to exercise caution when you are using 2 periodicities i.e., weeks and months, if you are using standard SAP calendar then you are good to go. If you are creating custom Fiscal variants pls ensure the start and end of a month is same in both the weekly and monthly variants. Failing which, there will be mismatch of data between the two dataviews.
Hope this helps.
Thanks
Mani Suresh

Issue with Dreamweaver - Server Busy error message

Hi,
Whenever i open Dreamweaver, i see "Server Busy" error message. I am unable to use the application due to this. Can you please help resolve this right away?
Regards,
Raghu

I am using Dreamweaver CC. This problem started after a recent update I think.
Operating system - Windows 8.1 Professional
Basic system config in case you need it - 8 GB RAM, 2 TB HDD, Intel i7
Regards,
Raghu
Date: Fri, 20 Dec 2013 11:18:44 -0800
From: [email protected]
To: [email protected]
Subject: Issue with Dreamweaver - Server Busy error message
    Re: Issue with Dreamweaver - Server Busy error message
    created by Nancy O. in Dreamweaver support forum - View the full discussion
Which ver and build # of DW?
Which operating System?
Do you use a testing server?
If so, which one and is it running?
   Nancy O.
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5948026#5948026
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5948026#5948026
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5948026#5948026. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in Dreamweaver support forum at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Open (.sdf) file with SQL server 2005 Management Studio

In VS2005, I have created a SQL Mobile database, (.sdf).
Copied that (.sdf) file to Desktop, and when I try to open with SQL Server 2005 management studio, its showing error "make sure the application for the file type (.sdf) is installed."
How can I open this file with SQL server?
Regards
Abinash

You must install SP2 if using Management Studio Express (http://www.microsoft.com/downloads/details.aspx?familyid=6053C6F8-82C8-479C-B25B-9ACA13141C9E&displaylang=en)Erik Ejlskov Jensen, MCTS: WM App, MCITP: SQL 2008 Dev - http://erikej.blogspot.com
Please mark as answer, if this was it.

VPP Distribution issues with OSX Server Profile Manager

Similar Messages

Maybe you are looking for