VPRS Cost Condition type

Hello,
I have copied VPRS cost condition type & created a new cost condition type ZABC for the purpose of recognizing cost for a project.
When i create sales order VPRS & ZABC cond types are getting populated in sales order with correct cost but when i create Invoice , VPRS is getting copied correctly from sales order whereas ZABC is not getting copied from sales order, It shows value $0 When i double click on ZABC , it shows "Inactive via formulae of incorrect".
Not sure if this is due to this error or some other error?
Copy control looks fine since it is copying all other cond types correctly.
VPRS & ZABC both are statistical.
Can someone help.
Thanks,
Manny

Hi Manny,
SAP does not recommend have more than one condition of type 'G' in general because only the first condition obtains the goods issue value as a condition value. For additional conditions, the special logic of condition category 'G' is lost.
Please refer to note 547570 about this.
If you still need the 2nd cost condition appears in the billing document, please consider the possible solution provided in
Note 15462.
Regards,
Alex

Similar Messages

Delivery cost condition type in PO coming as display mode

Hi Experts,
In my Purchase order having delivery cost condition types, for ex freight. For this PO i have done Goods receipt. PO all the delivery costs are showing in display mode. i have reversed the Good receipt.Again also all the delivery costs are showing grey mode in PO.
I want to make as editable for this PO after reversal of GR. Kindly do the nedful.

HI makarand ,
the condition type you have created is this assigend in Item Level or Header level. Plz check this in Header and item Conditions Tab. If you can assigned Delivery cost condition type in item level than it will changed by item level itself.
In Header Level it displays in Display Mode.
Vraj

Delivery cost condition types in ECC

We are going for Ext clasic scenario where SRM POs will be transferred to backend. How to have delivery cost condition types in SRM which will also appear in ECC POs? In SRM condition types, condition category does not have delivery cost option , like ECC.
I created the same condition type in SRM as in back end, and marked it as statistical in the 0100 pricing procedure, but it does not appear in backend PO , although the pricing procedure in backend has the same condition type as a delivery cost condition.

Hi
You can create custom fileds in the Local SRM POs by using SAP OSS Note 672960 and 485891.
Map the data from SRM system to back-end ECC system using BADIs ->
BBP_ECS_PO_OUT_BADI
BBP_PO_INBOUND_BADI
or some standard SAP function modules can also be used here.
Other related Information ->
You can change the following credit memo data at header level:
Unplanned delivery costs
You can change the unplanned delivery costs.
Links ->
http://help.sap.com/saphelp_srm50/helpdata/en/e7/72623c6b69bf70e10000000a11405a/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/a4/f1db8a5422408695e1d5265477ecd7/frameset.htm
Condition types in SRM
http://help.sap.com/saphelp_srm50/helpdata/en/72/f40f3c98ddaa4ce10000000a11402f/frameset.htm
Condition Categories in SRM
http://help.sap.com/saphelp_srm50/helpdata/en/76/d90c3cb8d19347e10000000a114084/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/ee/d9df3bbcce4b37e10000000a114084/frameset.htm
Hope this will help.
Do let me know.
Regards
- Atul

Cost condition type for MTO senario EKO2 or VPRS

Hi
We are having MTO scenario. So do we need VPRS condition for any purpose in this process or just EK02 is sufficient for costing purpose.
Also will user add value for EK02 manully? Or is there any other way to call this value automatically. Also in profit analysis document VPRS cost will come or EK02 value will come?
Client want to hide the cost of material form users, so what process can be followed. Can we create screen variant userid specific
Thanks

I hope you have searched regarding the topic.
Refer following SDN wiki link for all your anwers:
- [ EK01/EK02/VPRS |http://wiki.sdn.sap.com/wiki/display/ERPLO/VPRS,+EK01(ActualCost)andEK02(Calculated+Cost)]
Regards
JP

Error in pricing when trying to manually enter Shp. Cost condition type

Greetings everyone!
I'm creating my own pricing procedure and I've added Shp. Cost (0HD0) condition type to it and when I'm trying to enter a price per KG it gives me an error: "Material Test Product, condition 0HD0 : unit of measure KG is not allowed Invalid manual change to zero of condition pricing unit". Product's unit of measure and weight has been maintained though. It also happens if I use standard pricing procedure with that condition type in it... Why is that happening? Is there any workaround for that?
Thanks in advance.
Regards,
Alex.

Hello Alex,
Any solution to question yet? I am facing same issues and I am curious to the solution to this.
Kind regards,
Carla

Shipment cost - condition type item level

hey all ,
i have in 1 pricing procedure 4 condition types .
3 of them at delivery level and 1 at shipment level .
i created a requirement that activate the delivery level condition (3 conditions) OR the shipment
condition ( 1 condition ) .
the shipment cost document calculates the fright correctly but even if the condition ( 3 or 1 ) is disabled
by the requirement the other tab is still showing.
for example if i disable the 3 condition ( delivery ) i have 2 tabs ,
1 at delivery with 3 condition disables and another tab with active shipment level condition .
how do i get it to open with only 1 tab ?
Best Regards
ASA
Edited by: ASA MOKED on May 25, 2009 7:46 PM

Hi
Try to change the value of calculat.type in the defition of the condition (for instance, with A instead of B).
I hope this helps you
Regards
Eduardo

Shipment Cost Condition Types

Hi, does anyone have any experience/suggestions for extracting the condition types from table KONV for reporting with the shipment costs? It looks like there is no business content for this.
Thanks,
Patrick
BW 3.1 patch 9

Hi,
KONV has no business content DS. the best way that I know to extract from KONV is to create a generic extraction using an infoset. Go to T-code SQ02 create an infoset on KONV and use that infoset you created on KONV table to create a generic extractor in T-Code RSO2. Mind you, you have to do an infoset because KONV is a cluster table. You cannot use a view for this table as it is not a transparent table. This should work.
Let me know how it goes,
Reddy

Assign Shipment Cost Condition Types to Origin Groups

Hi all!
I need to assign condition types from shipment cost document (tr VI01) to origin groups. In customizing we have possibility to assign purchase document condition types to origin groups, but i cannot choose conditions types from shipment document there. Please, help, Is there any customizing whehe i can do it?

Hi,
Generate table which include field Transportation planning point(or any other which is common) by T_03
Assign this table in access sequence by T_07
Then in condition type detail under tab changes which can be done option MANUAL ENTRIES - set blank (No limitations ) by T_06
Then maintain condition record in TK11 for all conditions
Here don't put any prices for condition just save
Now When you create shipment cost document all condition will come automatically,then user will put only price and save.
Kapil

Shipment Cost Condition Type

Dear Gurus,
Is there any standard system condition type in the shipment cost who calculate the cost in the below behavior.
If product weight is in b/w 1 to 10 tons cost is $10,000.
and if weight is more than 10 tons lets say 11tons system calculate the value per ton. (10,000/10 ton = $ 1,000/ton * 11 tons = $11,000).
Please advise.
Looking forward for the response.
Regards,
Imran khan

Hi,
Dear Imran,
You have posted this question twice and there is no such condition
You have to maintain scale and if need to develop routine and that I already suggested to you.
Kindly do not post 1 question many time
Kapil

Vendor invoice for sales order delivery cost condition type

Dear SAP guru,
We have a scenario where we have added certain delivery cost in the sales order as condition type. There will be an accrual posting out of this condition type. We have defined the vendor code in the condition record.
The question is how to generate an invoice on this vendor with reference to Sales order, as there will not be any purchase order for the delivery cost.
Thanks in advance.
Rama

did you already apply note 1585042
Symptom
You create a Sales Order with multiple third-party items. The system
automatically generates an MM Purchase Requisition with multiple line
items. Each of these line items can have a different fixed vendor
(field EBAN-FLIEF).
In the Customizing transaction VOV7, the Sales Item Category (usually
TAS for Third Party) has the field ALEKZ 'Create PO Automatically'
selected. Therefore, one or multiple follow-on Purchase Orders will
also be created from the Requisition data during the same Sales Order
creation workflow. The system creates a separate Purchase Order for
each fixed vendor (supplier) found among the Requisition items.
During this ALE PO creation, if one of the Requisition items fails to
successfully create a PO, the next relevant PO created may have an
incorrect vendor in its header. The vendor in the PO header may not
match the fixed vendor that was designated in the Requisition line item.
Solution
Implement the attached code corrections. After this correction,
regardless of whether one of the Requisition items fails to generate a
PO, any PO that is successfully created during the process will have the
correct assigned vendor.

Shipment cost - condition type by packing material

hey all ,
my requirement is to charge for every container (packing material) in the shipment .
all of the materials from the deliveries will be packed in the shipment by container .
is there any generic condition types that calculate in this scenario ?
i found condition FS00 but is definition's it problematic at this moment for
all my requirements right now .
can i use other condition for this scenario ?
BR
ASA

solved :
changed the defintion of the condition

Shipment cost condition types - Insurance and loading/picking

Hello Experts!
I am trying to create a pricing procedure for shipment containing :
-One pricing condition for insurance (the insurance is a % of the total value of the transported goods (value of the delivery)).
-One pricing condition for loading. When the loading is done by the forwarding agent, we have to pay 4 euros/ parcel loaded.
Can you please help me to build those two conditions please?
Thank you!

Dear Pegasus
As the insurance would be fixed percentage, you can very well create a new condition type in V/06 say the name as ZINS and maintain the required fields with access sequence (you can retain the same condition type as your access sequence in V/06. Now go to V/07, select this ZINS and maintain the required combination. It may be for customer or Customer / Material. Now go to VK11, input the condition type and maintain the percentage and save. Create a sale order and see whether the insurance percentage calculates correctly.
With regard to loading charges, what do you mean by parcel ?? I mean, how it is packed ?? That is one parcel contains how many quantities ?? If this is fixed, then you can create a condition record for this also as explained above. Alternatively, you can maintain a header condition type for this and include the same in billing manually. While generating invoice, you know how many parcels are loaded and calculate the total value and input the same in condition tab at header level. Once you input this tab, click on Activate button at the bottom screen in condition tab so that the value will be equally allocated to all line items.
thanks
G. Lakshmipathi

How to calculate VPRS+ 5% condition type

Hello Gurus
Goodmorning,
We have some special requirement :
Price of the material should be calculated cost+ 5% profit margin , how to do calculate this?
Looking for some inputs on this regards
Regards
Venkat

Dear venkat,
Please maintain the VPRS condition as step 1 in pricing procedure, next step 2, PR00 and write logic to add 5% on VPRS condition in requirements or alt cal type and assign, hope fully your requirement will fulfil.
Please check and let us know your feedback.

Link between shipment item categories and Shipment Cost Condition Types

Hi guys,
Need more information on this. Would appreciate your help on this.

Table TVAP
or in SPRO goto
SD>Basic Function>Pricing>Pricing Control>Define Pricing by Item Category>activate pricing
reward points if it helps
regards
Biju

ZPRS- Cost(data source H) condition type is not visible in CRM sales order

Hi Colleagues,
I created a sales order in ERP. In the sales order the condition type ZPRS- Cost(data source H) is available. I downloaded the this sales order to CRM i can able to see the ZPRS condition type in sales order.
But when i create a new sales order with the same data (BP, Material,Sales organization) the condition ZPRS is not visible in the sales order. When i checked the PRC_TRACE it is showing the error as "Condition with external datasource has not be found".
Can any body help me in this issue.
Tanks and Best Regards,
Rajeswari

Hi Michael ,
Thank you very much for your answer. I just require one more confirmation from you.
Could you please confirm If we post a returns document in CRM system directly the "ZPRS or VPRS - Cost" Condition type will not appear in the return document condition types.
Untill and unless it is a billing document in CRM system the "cost" condtion wont appear rt?
Could you please confirm it.
Thanks in advance for your help.
Best Regards,
Rajeswari

VPRS Cost Condition type

Similar Messages

Maybe you are looking for