VPRS updated incorrectly for SO with item cat Ind PO

Hi SAP Gurus
We created a SO with item cat (Individual Purchase Order - Account
Assignment M in PO).In PO we have checkd the item as free goods.
However during billing the VPRS was not captured from PO price (which
is 0.00) but it was updated from material master. As for normal items,
VPRS was updated correctly from PO.
Pls advise for free goods how can we have the VPRS updated correctly from PO instead of material master.
Sanjay

Hi,
Goto VOV7, select item category-In business data tab - tick determine cost.
check in MR21 for material price.
Thanks,
Mohanprabu C.
Edited by: mohan prabu on Jul 7, 2009 9:12 AM
Edited by: mohan prabu on Jul 7, 2009 9:12 AM

Similar Messages

  • Service line item History for Contracts with item cat - D and Acc Assg P

    Hello Gurus,
    We have a situation where we create contract with item category D (Service) and account assignment category P (Projects). And for the line items of the PO we have difference services (without a service master) and each service line item has the price and quantity and other required fields. Now it is required to change the price or the quantity or both for this service line time and again (business requirement).
    The task is to to track the price changes and the quantity changes that have happened to the serive line item from the original and we require the report to diplay the original price and the present price on the service line.
    The question is: Is there a standard report in SAP to handle this? Or which are the tables where a service line items history is stored so that it can lead to a development.
    Regards - SS

    Hi Pankaj,
    We are using a Percentage based case (Prorata case)
    For Eg : For Eg for 65% (65KAI )material Price 1000 Rs
    If the Purity percentage varies payment will be done as per the same. For eg : for 70% (70KAI ) Price 1200 Rs. (approx)
    In this case unit of measurement is KAI (kilo active ingredient) .
    Actually we are dealing with dealer price where duties are entered Inclusive of the total price and entered at the time of making GR. and the payment is made as per the same;
    we have one po for 5000 MT. where we received material at first time Qty being 1993 MT.The duties manuallyentered are as follows :BED :24,167.00
    AED : 7,076.00
    ECS : 483.00
    SECES : 242.00
    These duties are flowing correctly in MIRO
    and the MIRO has been Posted and payment is also made.
    But while the balance quantity 2982 kg we received next time and those duties are as flowing as follws:
    BED : 36160
    AED : 10587
    ECS : 723
    SECS : 362
    But here at the MIRO the following duties are flowing instead of above
    BED : 36,526.08
    AED : 10,694.18
    ECS : 730.32
    SECS : 365.66
    What might be the error at this stage.
    waiting for solution at the earliest .
    Regards,
    Girish.C.M.
    09377077122

  • Third Party with item cat group NORM

    Hi!
    I've created a material X with item cat gr NORM. Now I'm creating a standard order with type OR. I don't have the material X in my plant and want to go through third party process.
    I've done the following-
    Maintained Purchasing and MRP views
    OR + NORM + TAN + TAS
    Could someone please guide me further as to how to create a third party order.
    I'm getting the error "Material X not maintained by purchasing" Mesg no.  ME046
    Thanx
    Sunny

    Hi suryaz ,
    --I think you have not selected the purchasing view option  for your material.
    --Go to MM01 & select the purchasing view for the material which you want to do the Third Party process.
    --In purchasing view  give the purchasing group.
    --Change the item category group as BANS in Sales Org2 tab & save it in MM01
    --Do the item category determination in VOV4
    Sales docItem category groupDefault Item category
    ORBANSTAS
    --Now raise the sales order VA01 & enter the material default the item category will be TAS.
    Let me know if your problem is solved.
    Regards
    Pradeep

  • To create purchase requisition with item cat L through mrp

    dear all,
               when ever i m running mrp a pur req is created but my requirement is to create a pur req with item cat L.
    even i m unable to change the item cat of pur req while editing it so pls tell me how to config to create pur req with item cat L after dooing mrp run.
    thanks
    ujwal

    Hi
    Have you set the master data's for sub contracting process?
    Following Master Data should be in place;
    u2022     MM01- Material Masters for Components and FG
    u2022     XK01 - Vendor Master (Subcontractor)
    u2022     CS01 - BOM for FG
    u2022     ME11 - Purchase Info record for Subcontracting info catergory 
                     Me01- Source list
    thanks
    Prasanna

  • Goods Receipt for packaging material - Item cat. ELP

    Hi expert,
    I am facing a problem regarding receive Packaging Material Item i MIGO via inbound. Problem detail as below hope you can advise me:
    1. I create PO order 1pc of Throttle
    2. In Inbound Delivery Screen I do Packing for Throttle by using Handling Unit Function, packaging Material is Carton Box.
    3. After Pack complete, Item for packaging material is auto generated in inbound screen:
    - Item Cat. of Throttle = ELN
    - Item Cat. of Carton Box (Packaging Material) = ELP
    4. When i do MIGO via Inbound: there is only 1 item for Throttle is displayed. How to do Goods Receipt for Carton Box item? Do i Miss any setting for that?
    Thanks.

    i thnk u sould maintain material master with two units one is throttle and second is cartoon.
    u shud maintain that how many throttle is equal to 1 cartoon.
    this u can maintain directlt in PO (In condition tab, with these two field : OUN and UN). in PO as a OUN ,give throttle n UN , give cartoon in item overview as well as condition tab.
    and during delivery change the unit in cartoon. then while migo, material will show in cartoon.
    hope it will be helpful.
    Thanks
    Nisha

  • Output Conditions for Header- with Item criteria

    Hi!
    We want to set up the Output conditions for delivery note per storage location.
    SAP has problems with reading it on the header level- as it is only on LIPS. Is there any easy workaround so it picks up the item field?
    Thanks!!
    Cheers
    Bea

    Hello Bea
    You may be able to acheive  this by doing the following:
    1) Add the field 'Storage Location'  (LGORT) to the filed catalog for output with the following activities:
         SPRO/IMG/Logistics Execution/Shipping/Basic Shipping Functions/Output Control/System Modifications for Output/New Fields
         For Output Control
    2) Then create a condition table for the new access:
       SPRO/IMG/Logistics Execution/Shipping/Basic Shipping Functions/Output Control/Output Determination/Maintain Output
       Determination for Outbound Deliveries/Maintain Condition Tables
    3) Then add the new condition table to the requisite access sequence:
       SPRO/IMG/Logistics Execution/Shipping/Basic Shipping Functions/Output Control/Output Determination/Maintain Output
       Determination for Outbound Deliveries/Maintain Access Sequences
    Please review OSS note 756688 which says that  you need to 'go to the item output screen before saving the document the header output is found'.
    It may be worthwhile to remain an output at item level with the same access also.
    OSS note: 756688 - Access sequence with item and header fields
    Hope this helps.

  • VPRS condition currency for batch split items

    Hi,
    i did the config for billing main item only in my delievry. that is batch split items will not be billed separately in billing.
    before doing the above change, the currency of VPRS was appearing as document currency but after doing the above config, the currency of VPRS is changed to material valuation currency.(i.e taken from material master)
    what is to be done so that currency for vprs in case of billing of main items shud be equal to document currency.
    if there is no batch split, there is no issue of currency. if there is batch split in delivery and i bill only main item, vprs currency gets changed to material master currency.
    regards
    sac

    Normally, it should work for both bath main item and batch split item.
    Please check the batch split items:
    - what's the item category. Is it relevant for picking?
    - what's the plant / sto.loc. in batch splite items? Is it assigned to a WM?
    - What's the value in LIPS-KOMKZ field for the batch split items? (EK00 is valid only when komkz = A).

  • Intercompany transfer for material with item category Erla

    Hi,
    I have a typical requirement.
    I am creating a value pack(finish good) with item category mainatined as ERLA(while mat master creation) which consistes of 2 items.
    I have maintained a BOM for this value pack(finished material).
    Since ERLA is maintained,I can explode BOM in Sales Order creation(correct me if I am wrong)
    This is okay for sales cycle.
    I have following requirement
    I want to do a Intecompany stock transfer of this value pack(i.e. finish good) with doc type NB.
    The problem in this is that it gives error while creating outbound delivery stating some entries missing in table (do not exactly remember)for NLCC/DOGN.. something like that.
    If anyone has done this type of scenario earlier then request you to send me the configuration settings required to be done in terms of Item category/Delievry combination etc etc .
    This is quite urgent for me.
    If there is any different way to map this Intecompany Stock Transfer of Material (with Item category maintained as ERLA) then please let me know.
    Thanks in advance.
    Regards,
    manOO

    Hi
    You maintain "Item category group" NORM in the Sales org 2 tab, this is used for sales organisation and distribution channel for Outboumd delivery.
    The "General Item category group" does not refer to the Sales organisation and distribution channel, this is used for Inbound delivery.
    In can create the material master in MM01, specify the "Material type" and "Industry sector" .
    For, Item category determination in VOV4, you need to assign like this as below,
    Sales doc type + Item category group + usage + Item category of higher level item = Item category.
    Item category determination for free item,
    OR + NORM + FREE + TAN = TANN.
    As beacuse you are giving the normal material as free, therefore you must give the indication to the system to use it as free material by specifying the usage as "FREE".

  • Add Material with Item Cat. T

    Dear All,
                   I need to add a material component with Item Category* T (Text Item)* in project. When I am putting material Code and Item Category as T, I am getting "Do not enter material for Item Category T (Message No. CO134)".
                  Please, let me know how I can add material for T Item Category since we are doing some ABAP devlpment for same??
    Thanks and Regards,
    Atul R. Rajmane

    Hi Atul ,
    For Entering the Text Material for Project u need to select Item Categeory as"T" and Enter only the Discription requied, no other i/p is required .
    The Material field will be grayed out .
    Regards
    Hemant

  • Is there a plan to update Configurator for use with InDesign CC?

    Hi all,
    When will Configurator be available for use with InDesign CC... Is there a plan to update it in the near future to be compatible with ID CC?
    Thank you so much:)
    Christine

    shane.daley wrote:
    I have recently purchased an iPad Air 2 and to increase useability purchased a Logitech +type bluetooth keyboard. I'm very happy with both but disappointed in the lack of autocorrect function between the bluetooth keyboards (not a logitech deficiancy) and iOS.
    Is there a plan to fix this please?!
    Is that because you also ask the same question to Logitech and that was their response, since you're using a 3rd party software

  • Downloading Windows Update Packages for inclusion with System Image Manager

    Is there a tool other than WSUS or SCCM that can download all Windows 8.1 updates for use with System Image Manager? I would like to deploy the updates along with the OS, custom drivers, and custom applications.
    www.annabooks.com / www.seanliming.com / Book Author - Pro Guide to WE8S, Pro Guide to WES 7, Pro Guide to POS for .NET

    Hi Sean Liming ,
    The main purpose is to download all the updates for specific system version image ,right ?
    I haven`t heared about such an official released tool to do this .
    As for the API ,I have found a tool based on this API developed by our MSDN guys to install the updates ,but I am afraid it doesn`t meet your need.
    Searching, Downloading, and Installing Specific Updates
    https://msdn.microsoft.com/en-us/library/windows/desktop/aa387101(v=vs.85).aspx
    Get-WindowsUpdates.ps1
    https://gallery.technet.microsoft.com/Get-WindowsUpdatesps1-7c82c1f4
    Best regards
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • I've started updating Flare for use with Flex/Spark

    Hi,
    Flare is a pretty cool actionscript library which allows you to make some pretty great interactive visualisations (or visualizations if you're American) of data. A couple of problems with it though:
    It has pretty awful documentation. There's a tutorial that gets too in depth, too quickly and doesn't outline how to get up and running quickly at all, or what form of data is expected. &
    It doesn't play all that well with the Spark architecture, making you 'hand draw' things on the nodes of a chart rather than just applying skins.
    I'm trying to rectify this by:
    Writing a quick start guide to getting up and running with Flare quickly. &
    Starting to recode the library to be Flex friendly.
    The quickstart guide should get anyone up and running with Flare using the downloadable version there is from them.
    The second post has a partially recoded version of Flare to be friendly with Flex. I've worked on it more since then, and will continue to post updates as I get more and more working and cleaned up.
    I hope this will be helpful, as Flare has some pretty cool things going for it (and some baffling choices also!).

    Yes,you will lose all the music files when updating the firmware. What firmware is on the device now? You will need to do the update on XP SP2 with Windows Media Player 0 & no WMP components.
    nikkic wrote:
    Hello,I've just bought a new laptop with Vista Home Premium. It is recognising my player but is requesting I download drivers and the installation cd does not work. I have been searching for a solution to this and believe there is a way of updating my player using a computer with XP.Could someone please tell me how to do this?Will I lose all stored music if I do update the firmware?
    Thank you!

  • Updating Administrators(built-in) with item-level targeting on an enforced policy

    I need help with this. 
    In our Computers OU, we have an enforced GPO with a computer policy that adds local admins to the computers on our network. The policy is Computer Configuration >> Policies >> Windows Settings >> Security Settings >> Local Policies/User
    Rights Assignment >> Restricted Groups >> Group (BUILTIN\Administrators). For this example, we'll call this GPO #1.
    I need to add another user account as a local admin, but targeted to certain computers.
    I tried to edit GPO #1. I went into Computer Configuration >> Control Panel Settings > Local Users and Groups, and then added a Group with the settings >> Updating >> Administrators (built-in) & item-level targeting to the computers
    I wanted, but the setting always gets over-written by the setting that adds local admins. 
    I then tried to create a GPO with the Group update. Lets call this GPO #2. I enforced this rule, linked it to the OU, changed the order so that GPO #2 is above GPO #1, but this doesn't seem to be working.
    Is my inheritance order incorrect?
    1 is GPO #2
    2 is GPO #1
    Ideas anyone?

    > In our Computers OU, we have an enforced GPO with a computer policy that
    > adds local admins to the computers on our network. The policy is
    > Computer Configuration >> Policies >> Windows Settings >> Security
    > Settings >> Local Policies/User Rights Assignment >> Restricted Groups
    >  >> Group (BUILTIN\Administrators).
    Restricted Groups has 2 operation modes: Members and Member of. The
    first one clears out any existing members, and that's what you use right
    now. The second simply adds a group to another group and keeps all
    existing members, that's what you want to use for your additional computers.
     > I need to add another user account as a local admin, but targeted to
     > certain computers.
    To do so, you need to create a domain group that contains the related
    account(s). This domain group is "member of" local admins. And make sure
    this second GPO is linked higher (so it is processed _after_ the first
    one that clears out existing members).
    Martin
    Mal ein
    GUTES Buch über GPOs lesen?
    NO THEY ARE NOT EVIL, if you know what you are doing:
    Good or bad GPOs?
    And if IT bothers me - coke bottle design refreshment :))
    Yes I know I can do this, but I can't use item-level targeting with this setup. I don't want the user account to be local admins for all computers. I only want it to be local admins for 4 of them.
    Wouldn't precedence take place in this OU if I have the GPO that adds another member as #1, and the GPO that deletes and adds as #2? It isn't working as I had thought it would.

  • Need update function for datagrid selected item

    Hello -- I'm using CF+ Flex+ FDS to connect and modify data.
    I am building a form that info is entered into, and then inserted
    into my database using a the wizard CFCs to insert records. That
    data is then displayed in a datagrid with the rest of the data in
    the db. When I need to update the info, I select the record from
    the datagrid and it populates my update form fields. However this
    is as far as I can get. I do not know how to write the update
    function to take the changed values of the update form and update
    the db with these values.
    I know the datagrid has an edit feature, however the field I
    need to update is not going to be a column of this datagrid. So I
    need to do it via a form where I can assign a value to the field.
    Currently i am inserting and deleting records using dataServices
    with an arrayCollection. Any help on an update function would be
    great, thanks

    Have your form elements update the associated model
    (DG.selectedItem) field. On change is often good for this, or
    focusOut. Perhaps flag the item as modified, so that you can loop
    over the dataProvider to extract the modified rows.
    Then send the modified rows to the server as an
    ArrayCollection.
    Tracy

  • I have a second gen touch and am trying to update it for use with itunes because it is telling me it is not supported

    I am trying to update my daughters ipod touch, 2nd generation with itunes and am being told that it is not compatible with my version of itunes. I have tried to install the new itunes but I am being told that my compute
    r doesnt support it wither. any suggestions?

    Here are the requirments for 10.5.8:
    Mac computer with an Intel, PowerPC G5, or PowerPC G4 (867MHz or faster) processor
    512MB of memory
    DVD drive for installation
    9GB of available disk space
    You have to purchase the upgrade from Apple for $129. You ned to call and order ti since it is not listed in their on-line store. You can also try eBay or Craig's List. 

Maybe you are looking for