VRealize Operations Management Packs for Lenovo Compute and Lenovo Network Switches

 Lenovo Systems Management Community Members:
Blue Medora is currently developing a two new and distinct VMware vRealize Operations Management Packs aimed at Lenovo datacenter technology -- a vROps MP for Lenovo Compute as well as a vROps MP for Lenovo Network Switches. Our target is to release both vROps MPs in the September timeframe. Both of the MPs will support vROps v6+. If vROps integration with Lenovo Compute and/or Lenovo Network Switches is something that is relevant to you, our product management team is very interested in talking to you about what aspects of the Lenovo-based compute and network infrastructure you like to see surfaced in vROps, models of Lenovo servers and network switches your your organization most commonly leverages, as well as any specific troubleshooting / diagnostic use cases you have around Lenovo compute and network.
Please drop us a line at [email protected] if you'd like to participate in a pre-release program for the vROps MPs for Lenovo Compute and Lenovo Network Switches.

Sorry for being a bit slow in responding. Adapting the settings for my wired ethernet adapter as rdhw suggested solved the problem. (But since I am not using any wake-on features, I simply opted to turn them off instead.)
Interestingly, I had previously looked at these settings in the BIOS and turned them off there (forgot to mention this), but it appears the Device Manager settings were overriding the BIOS settings.
So, I still find Access Connections to be slow (it will take maybe half a minute or so to figure out what is happening when I switch between wireless and wired connections), and also getting the X200 to go to sleep takes more time than it used to do (it used to go to sleep momentarily when I, say, closed the lid, whereas now it will need to think for 10-15 seconds first), but at least everything works reasonably well now.
Which is nice, and I don't want to break anything that I don't have the time to fix, so I think I will leave it at this for the time being. Thanks so much for the help (and for the prompt reply)!

Similar Messages

  • [Blog] Using VMware vROPs to monitor Oracle Database and WebLogic.  Management Pack for Oracle EM, Hyperic Plugins, or Both?

    This blog post provides a suggested methodology for helping users of VMware vROps/vCOps decide which of the existing solutions, the vROps Management Pack for Oracle EM and the VMware vROps Hyperic Plugins for Oracle, should be used to monitor their Oracle workloads.
    It’s been a nearly a year since VMware transferred the vCOps Adapter for Oracle Enterprise Manager (OEM) to Blue Medora and since that transfer Blue Medora has released a number of major updates as well as rebranded it the Blue Medora vROps Management Pack for Oracle EM. Over that same period of time VMware has continued to evolve their Oracle-focused (Oracle Database and WebLogic J2EE) Hyperic agent-based plugins culminating most recently with a October 2014 update to the Oracle Database plugin that provides support for Oracle Database 12c.
    vROps for Oracle Database - Management Pack vs Hyperic comparison
    Read the rest here.

    can you also post 28,000 more lines? I'm sure this will be helpful....

  • System Center Management Pack for Windows Server Operating System not available

    Hi,
    i have problems to download the updated version of the System Center Management Pack for Windows Server Operating System.
    Here is a link that says that this MP was updated some days before but the download link is broken:
    http://www.microsoft.com/germany/technet/aktuell/news/show.aspx?id=msdn_de_56942
    http://www.microsoft.com/en-us/download/details.aspx?id=9296&WT.mc_id=rss_alldownloads_all
    If i try download this MP through the SCOM 2012 Console i get also an download error.
    Can you help me?
    Thanks

    Hi,
    Don't import the MP, there is a bug in the MP
    https://nocentdocent.wordpress.com/2015/01/13/scom-os-mp-6-0-7294-0-serious-flaw/
    http://thoughtsonopsmgr.blogspot.dk/2015/01/warning-dont-update-to-latest-windows.html
    http://kevingreeneitblog.blogspot.dk/2015/01/scom-new-windows-server-os-management.html
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • Documentation and Installer for "Oracle VM Management Pack" for EMGC?

    Hi,
    Can you please provide locations/links to download the Documentation and the Installer for "*Oracle VM Management Pack"* for EMGC? I need to install the virtualization pack for provisioning OVM templates on Virtual machines.
    Thanks in advance,
    Ranganath

    >
    Can you please provide locations/links to download the Documentation and the Installer for "*Oracle VM Management Pack"* for EMGC? I need to install the virtualization pack for provisioning OVM templates on Virtual machines.Hi Ranganath,
    This feature is present in EM Grid Control 10.2.0.5 and you need to enable it..
    Please refer to
    How to Enable Oracle VM Management Pack in EM Grid Control 10.2.0.5 [ID 781879.1]
    http://www.oracle.com/us/corporate/press/017955_EN
    Regards
    Rajesh

  • UCS Management Pack for System Center 2012 OpsMgr add monitor wizard error

    We're successfully using the 2.6.0.179 version of the UCS Management Pack for System Center 2012 Operations Manager in our 2012 SP1 OpsMgr environment; however, in the new 2012 R2 OpsMgr environment we've stood-up and in which we installed the 2.6.2.0 version of the UCS MP, we're getting an error when trying to run the Add Monitoring Wizard under the Management Pack Templates node of the Authoring pane. We get the same error from the 2.6.1.0 version of the UCS MP as well. The text of the error is as follows:
    "The page [Cisco.UCS.MP.UI.Proxy.Template.Page.ProxyDetailsPage] in the assembly [Cisco.UCS.MP.UI.Culture="",PublicKeyToken="6c96076cdf2c87a",Version="2.6.0.0"] could not be loaded. Please make sure that the account you are running under has sufficient privileges to load the given assembly, or the management pack that defines this page is installed or the assembly containing the page is in the path of the executible or that the page derives from known Operations Manager page type."
    I'm an admin user in OpsMgr, so this should not be a user privilege issue, and that leaves the MP itself. The fact that a 2.6.0.0 version is mentioned makes me wonder if the base version of the MP must be installed before the 2.6.2 version. I'd test this, but we no longer have that version, and its no longer available for download from Cisco that I can see.
    Has any dealt with this issue successfully, or have any insight into the problem?

    Solved...the requirement is that you must do the MP configuration from the SCOM console on the SCOM Management Server where you installed the Cisco UCS MP; you can't do it from a SCOM console on a remote computer like I was trying to do.

  • Management Pack for Windows Server 2008 Enterprise SP1

    Hello,
    I tried to manage the performance of a Windows Server 2008 Enterprise SP1 (6.0.6001) but SCOM 2007 R2 just check the availability with a ping status.
    I have installed the normal management packs:
    On the same SCOM, I have servers with Windows Server 2008 R2 and they work perfect.
    What can I do?

    Hi Journey Tinoco,
    Performance can be monitored by using the active alerts TAB where a alert / alerts will be triggered based on the default management pack which you have installed / imported or if you have created a custom monitor based on your preference on what performance
    counter you want to monitor on windows server 2008 servers VIA SCOM.
    Or you can pull server performance report specific for Windows server 2008 from the reporting TAB as per the below screen shot for details.
    The one which you are opened is the health explorer view which is not showing much details.
    Go to reporting TAB ===> Select Windows server 2008 operating system monitoring and then What ever appropriate report you need to pull based on your requirement. For example i have pulled a report below for "Operating system performance.
    Over here Click object and select the computer name and the icon should be a Windows serve / Computer as per the icon in my screen shot below. Select the time and date from and to the report you want and dont touch the add object option. Once done click
    the Run button on the left to you will get the report as below.
    Please note: If the below report is what you are looking for is not available in your SCOM's  reporting TAB. Then you have not installed the reporting Management pack for Windows server 2008 monitoring. Download
    it from the below link.
    http://www.microsoft.com/en-in/download/details.aspx?id=9296
    Hope this helps you.
    Gautam.75801

  • Problem configuring vRealize Operations Manager

    Hi there,
    I have installed VRealize operations manager version 6.0 (trial version for 60 days) and ever since I have installed it, it says collecting data but not able to see any details of my vmware infrastructure in there. When I click on reports, it says no reports generated. I am not sure if it is configured correctly or not.  Can you please help me with its set up?
    Thanks,
    Ruby

    hi
    same problem
    any solution?
    thanks

  • Need Management packs for mpseal

    Hello,
    I need this MP to seeal another MP, can somone tell me from where to dld them?
    Could not load management pack [ID=Microsoft.SystemCenter.Library, KeyToken=31bf3856ad364e35, Version=7.0.8433.0]. 
    I found http://systemcentercore.com/?Get-ManagementPack=Microsoft.SystemCenter.Library&Version=7.0.8433.0
    Nut this is the MPB not MP, how do i unpack it?
    Br,
    Adrian

    No management pack for MPSeal. Management packs are sealed by using the MPSeal tool that is located in the SupportTools folder of the Operations Manager 2007 R2 distribution media. This is a command-line tool that creates a sealed .mp file from an unsealed
    .xml file. After performing the sealing process, you can install the sealed management pack in your management group.
    For Seal Management pack, you can check below link
    http://blog.coretech.dk/msk/opsmgr-seal-a-management-pack-step-by-step/
    For above issue, you can refer below link
    http://www.systemcentercentral.com/forums-archive/topic/mpseal-fails-with-the-management-pack-was-not-found-in-the-store/
    Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
    Mai Ali | My blog: Technical | Twitter:
    Mai Ali

  • Management Pack for Server 2008 OS Monitoring version 6.0.7296 cannot be installed or downloaded from the catalog

    In our newly installed Operations Manager I'm trying to install the MP's for monitoring Windows Server 2008 OS through the catalog option. Every attempt (including downloading it through the OpsMgr console) fails with the following error:
    Windows Server 2008 Operating System (Monitoring) did not pass the security verification. 
    The management pack cannot be downloaded and the temporary file has been deleted.
    Could not load management pack [ID=Microsoft.Windows.Server.2008.Monitoring, Keytoken=31bf3856ad364e35, Version=6.0.7296].
    This includes the required packs: "Windows Server Operating System Library v6.0.7296" and "Windows Server 2008 Operating System (Discovery) v6.0.7296".
    The only option I found was downloading it directly from the website http://www.microsoft.com/en-us/download/details.aspx?id=9296 but I'm a bit anxious if it can't be downloaded from the catalog. Is this pack revoked? Or could there be something wrong
    in our environment that prevents us from downloading it from the catalog?

    I have the exact same issue - and when I select to download from the catalog, I get an error that the security certificate cannot be verified. I checked it, and it is valid till 2016, so I selected continue and then it works normally. however I do get the
    same list of errors.
    The normal "manual" download is available, and if it was pulled by MS, they would block the download button there too ?
    I downloaded the MP manually and installed it without any issues. same for the sharepoint 2010 MP 14.0.7135.5000 mp. installing via the catalog failed while the manual download was available and works OK.
    (and the weird thing is - I downloaded / installed a few other updates via the catalog fine....)
    System Center Management Pack for Windows Server Operating System (mp download)
    Microsoft SharePoint 2010 Products Management Pack for System Center Operations Manager 2007 (mp download)

  • UCS management pack for SCOM

    I've installed the UCS management pack for Microsoft SCOM 2007 R2. It appears to be working, however I now keep seeing all computers that have the SCOM agent installed trying to run the cisco.ucs.computer.probeaction.vbs script, which fails and generates alerts. Does anyone know why these servers that are unrelated to UCS would be trying to run these scripts, or how to fix this problem?

    The Problem is that you use an “&” string in a name of one of the protection Groups.
    Change the name of the protection Group where you have used an “&” symbol
    . Restart the “System Center Management” and you should see that the discovery success.
    If still have same issue, started to register the differtent dll’s again on the machine and apparently registering the MOMScriptAPI.dll
    http://scug.be/dieter/2012/11/08/scom-event-id-21406-file-name-or-class-not-found/
    Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
    Mai Ali | My blog: Technical | Twitter:
    Mai Ali

  • Oracle Application Management Pack for Siebel 10gR4 is GA

    Oracle Application Management Pack for Siebel 10gR4 is now generally available.
    Go to this OTN page if you want more information about the product.
    http://www.oracle.com/technology/products/oem/prod_focus/app_mgmt.html
    You may also download it from OTN to try it out as part of Enterprise Manager 10gR4. We will be demonstrating it at booths D8 and J7 at the Oracle Demoground at Moscone South Hall, at session S291922 at Moscone West L2-2001 on Monday, 11/12 from 3:15 to 4:15 p.m., and at the Siebel Pack Hands-on Lab (S294089) at Marriott Hotel Golden Gate Room B1 on Thursday, 11/15 from 11:30 a.m.-12:30 p.m.
    The Siebel Pack is designed to be a complete and integrated management tool for Siebel. Using this management pack, you may get proactive alerts on impending problems on the application, examine run-time statistics to troubleshoot and tune performance, compare configurations across different environments, keep track of configuration changes, proactively enforce configuration policies in order to avoid configuration related problems, monitor and report on service level delivered by the application and performance diagnostics of user and server performance. The pack may be used with other Oracle Enterprise Manager management packs and plug-in’s to achieve end-to-end management of the entire application environment, including both Oracle and non-Oracle databases, operating systems, storage and network devices.
    The 10gR4 release of this pack adds integrated Siebel Transaction Diagnostic support using data captured via Siebel Application Response Measurement (SARM) framework. With this tool, you may:
    - Analyze request processing for individual user requests
    - Analyze CPU and memory consumption of processing requests for different Siebel Server Components
    - Visualize SARM metric data graphically
    - Compare performance profiles over time
    - Create performance reports and share them with your co-worker for collaborative performance diagnostics
    The 10gR4 version of this Siebel Transaction Diagnostic tool also adds support for Siebel 7.7 and 7.8 in addition to being compatible with Siebel 8.0. It is fully integrated with Oracle Enterprise Manager, which eliminates the need for separate install and user maintenance, and it runs on all operating system platforms that Oracle Enterprise Manager supports.

    Working with the Oracle Enterprise Manager group to integrate closely with their monitoring solutions has been one of the most important advantages of joining the Oracle team. As our customers have started to use CRM more deeply as part of their business processes, CRM has quickly become Mission Critical, with 24/7 uptime requirements. Furthermore, as CRM becomes further integrated into the enterprise, knowing the status and health of the connections to multiple backend systems becomes evermore crucial.
    Through our partnership with the Oracle Enterprise Manager, we aim to support true Enterprise-class CRM. We are the only solution out there with over six million live users, and we are leveraging the knowledge gained from those customers in our Enterprise Manager integration. With the real-time monitoring and diagnosis that Oracle Enterprise Manager provides, we simplify the process of managing sophisticated CRM implementations which span organizations and systems. If you have a Siebel implementation with four servers or more, or with integrations to several systems, you owe it to yourself to check out Oracle Enterprise Manager.

  • SCOM 2012 R2 Management Packs for monitoring IBM Tivoli

    Are there management packs available to monitor IBM Tivoli through SCOM 2012 R2?
    If yes, what all components in IBM Tivoli family can be monitored?
    Thanks in advance

    Hi,
    I think if there is any Management Pack for IBM Tivoli, then this Management Pack should be provided by IBM, and this may be fee-based also, I would like to suggest you contact IBM for this.
    And hope the below link be helpful:
    http://unofficialsystemcentercatalog.wordpress.com/2012/12/27/operations-manager-is-there-a-management-pack-for/
    Regards,
    Yan Li
    Regards, Yan Li

  • Latest 2003 DHCP management pack for SCOM 2007 R2 ?

    According to the links below the download of the Windows Server DHCP Management Pack includes monitoring of 2003 and 2008 DHCP but when running the .msi I only see references to a 2008 R2 MP.
    http://pinpoint.microsoft.com/en-us/applications/windows-server-dhcp-management-pack-for-system-center-operations-12884902059
    http://www.microsoft.com/downloads/en/details.aspx?FamilyID=e5b48bef-4b21-4743-b562-580ec7984b24&displaylang=en
    I'm looking for latest 2003 DHCP MP.
    thanks

    I think the version 6.0.6709.0 which can be get in Microsoft Download Center should be the latest version and it supports Windows Server 2003. You can
    see the Release History “11/7/2008 - Updated release, version 6.0.6452.0, for DHCP 2000/2003/2008”, “6/28/2010 - Updated release, version 6.0.6709.0", with added support for DHCP 2008 R2”:
    Windows Server DHCP Management Pack for System Center Operations Manager 2007
    http://www.microsoft.com/downloads/en/details.aspx?displaylang=en&FamilyID=e5b48bef-4b21-4743-b562-580ec7984b24
    Thanks.
    Nicholas Li - MSFT
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • Management Pack for Office 365

    Is there Management Pack for Office 365 for Operating Manager 2012 R2/

    Hi,
    Monitoring Office 365 using System Center Operations Manager (SCOM)–Management Pack
    http://www.agileit.com/news/monitoring-office-365-using-system-center-operations-manager-scom-management-pack/
    Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • How to install Oracle Change Management Pack for 11g database.

    Hi,
    I need to setup "Oracle Change Management Pack" for my oracle11g database. Can any body help to do the same. i am able to configure following.
    Oracle Configuration Management Pack
    Oracle Data Masking Pack
    Oracle Diagnostic Pack
    Oracle Tuning Pack
    using following URL
    http://docs.oracle.com/cd/B28359_01/license.111/b28287/options.htm#CIHBGJCC but not able to install "Oracle Change Management Pack for 11g database". Can any body share any pointers if any...
    Regards
    DBA.

    As far as I could understand, this is a part of Oracle EM/Grid installation:
    The sections that follow describe the Oracle management packs. The management packs can be purchased only with Enterprise Edition. The features in these packs are accessible through Oracle Enterprise Manager Database Control, Oracle Enterprise Manager Grid Control, and APIs provided with Oracle Database software.

Maybe you are looking for