VRF Collector Job Failing (LMS 4.0)
My VRF Collector job has started failing.
I have attached the contents of the vnmcollector.log file after setting debug level to DEBUG.
I cannot see for the life of me what the problem is - has anyone got any ideas on this as I cannot see from the debug log what the problem is.
Many thanks
Steve
This may or may not be relevant.
If I go to Monitor> Troubleshooting Tools> VRF Lite> Show Commands, click 'Select' against source device and then expand 'All Devices' nothing is listed.
Similar Messages
-
Hello,
I work with Cisco LMS 4.0, in the Job Browser I have several times the job VRF Collector Job with the status Failed.
Could you please tell me what is this job, why it starts every day and how can I fix it?
Thanks.This job is started after Topology Data Collections to collect VRF lite information from devices. If you are not using VRF lite in your network, then you can disable the jobs under
Admin > Collection Settings > VRF Lite > VRF Lite Collector Schedule. Uncheck the "
Run VRF Collector After Every Data Collection" box. -
Quality collector job fails inspite of extractor fetching the data successfully
Hi,
Quality collector job fails on 'DVS' (managed system) inspite of extractor fetching the data successfully.
Currently Solution manager in use is Solution Manager 'SOP' 7.1 SP12
All the RTCCTOOL recommendations are applied on SOP & DVS. ST-PI is on 2008_1_700 SP11 on both the systems. ST-BCO component in on SP11.
As a part of trouble shooting, the extractor run for ATC & ATC exemptions are monitored.
The extractor run is successfull. Also Master run for ATC is successfully completed.
ATC monitoring for Custom Code (result) extractor result
There are no ATC monitoring for Custom Code (exemption) but the extractor run is successful
Successfull ATC master run on DVS Managed system
following notes are implemented
2127901 - CCLM: Quality fails to get Results and exemptions due to Incorrect format of date
2067543 - Quality Collector : Missing Function name for Remote Solution
Is anyone facing a similar issue?
CanHI Sylke,
Note 2098187 is for ATC exception, the not is currently not in the Solution manager system SOP (and also in SOD which is the development system of solution manager landscape).
But I have configured SOD (Solution manager Development system) to PDS (ECC sandbox) and the Quality collector job was successful (without note 2098187 implemented)
As SOD and SOP are at same SP level, I am expecting Quality collector job on SOP for DVS to finish successful as well similar to Quality collector on SOD for PDS which is already finished successfully and fetched the data. Can you please advise here?
Based on 2077995, i have executed the report for DVS in SOP system and the status is Green for '0SM_ATC'
When i check the for data in 0SM_ATC, I find the data for DVS system
I am able to successfully run 0SM_ATC_CCL_QUAL but not 0SM_ATC_RUNDATE_LOOKUP.
when i try to execute the query 0SM_ATC_RUNDATE_LOOKUP in RSRT for SOP, i get the below notification, looks like i need to install/activate the query in RSA1 transaction
0SM_ATC_RUNDATE_LOOKUP in RSA1 of SOP system
0SM_ATC_RUNDATE_LOOKUP in RSA1 of SOD system (development solution manager where Quality collector job for PDS is successful)
sample output of 0SM_ATC_CCL_QUAL,
Can you advise here a well? Looks like install/activate 0SM_ATC_RUNDATE_LOOKUP in SOP, should solve the problem
All the notes suggested are already implemented in SOD and SOP
thanks
Sai -
DB6 - DB13 collector jobs fail
Hallo,
in the DB13 there are DB-collect-jobs red.
CLEANUP.... are scheduled two times (repeating every 2 hours).
One of the CLEANUP-collector-jobs is green and okay, the other one is red and canceled.
Any idea how to get rid of the dupplets?
THX
RaymondHi,
the additional (db-collector) entries can not be deleted with db13.
When I delete per sql-script as told in the sap note, everything is fine.
Thank you
Raymond -
LMS 3.2 Syslog purge job failed.
We installed LMS 3.2 on windows server 2003 enterprise edition. RME version is 4.3.1. We have created daily syslog purge job from RME> Admin> Syslog> Set Purge Policy. This job failes with the following error.
"Drop table failed:SQL Anywhere Error -210: User 'DBA' has the row in 'SYSLOG_20100516' locked 8405 42W18
[ Sat Jun 19 01:00:07 GMT+05:30 2010 ],ERROR,[main],Failed to purge syslogs"
After server restart job will again execute normally for few days.
Please check attached log file of specified job.
RegardsThe only reports of this problem in the past has been with two jobs being created during an upgrade. This would not have been something you would have done yourself. I suggest you open a TAC service request so database locking analysis can be done to find what process is keeping that table locked.
-
IPSLA/Perfromance/IPM: syslog message on collector down/failed
Dears,
Customer is upgrading from ciscoworks SNMS and they feel they loose a lot of valuable info.
They now have a few maps that give an at a glace state of the network. There is little I can do in LMS 4.1 to cover that.
The main problem for now is alerting on a host that runs a service like smtp, dns, etc and some hosts that should be pingable.
I'm trying to configure a collector on "IPM/ IPSLA/Performance" to run tests like echo, smtp and dns from a few central devices.
I think a IPSLA device it is capable to send syslog messages when the collector action 'fails' right?
Does anyone know what these messages look like?
I'd like to generate an alert using the syslog automated actions so I need to know what I can expect, provided my asumptions are correct.
Cheers,
MichelI am amazed.
When I use LMS to configure the devices to send IPSLA SYSLOG it configures ..... traps!
"IP SLA jobs for syslog configuration"
rtr logging traps
ip sla logging traps
ip sla monitor logging traps
I found this other thread https://supportforums.cisco.com/thread/176841
It seems what is being said in LMS help and on cisco.com is perhaps somewhat misleading.
It can send traps not syslogs.
Now looking at the helpfile I get the impression someone is confused about syslog and traps
"IPSLA Syslog Configuration
Syslog is a trap message that is sent from the device if any changes occur to the device. You can either enable or disable the IPSLA Syslog. However the IPSLA Syslog can be configured only by a Network Administrator or System Administrator.
The Device Selector will display only the Source devices that are IPSLA enabled. It does not display any Target devices.
To enable or disable IPSLA Syslog: "
A SYSLOG message is not a trap message!.
Can someone shed some light on this?
Can I get LMS to act upon a failing collector? -
Dear colleagues,
I have some background jods failed:
SM_CCL:OBJ_<SID>_<Installation_Number>
19.05.2014 10:05:57 Job started
19.05.2014 10:05:57 Step 001 started (program RAGS_CC_GET_OBJECTS, variant &0000000000000, user ID SOLMAN_BTC)
19.05.2014 10:05:59 Selected System: <SID>_<Installation_Number>
19.05.2014 10:05:59 Variant
19.05.2014 10:06:01 Solution: Local SAP Solution
19.05.2014 10:06:42 No objects found.
19.05.2014 10:06:42 Failed with sy-subrc: 2
19.05.2014 10:06:42 Job cancelled after system exception ERROR_MESSAGE
and
SM_CCL:LUSG_<SID>_<Installation_Number>
18.05.2014 13:47:30 Job started
18.05.2014 13:47:31 Step 001 started (program RAGS_CC_GET_LAST_USAGE, variant &0000000000000, user ID SOLMAN_BTC)
18.05.2014 13:47:33 Variant
18.05.2014 13:47:35 CCLM Landscape not set up properly. Read long text for further details
18.05.2014 13:47:35 CC Objects: 0
18.05.2014 13:47:35 Last Usage Data has never been retrieved before
18.05.2014 13:47:35 Merge data from AGS_CC_USAGE
18.05.2014 13:47:35 Solution: Local SAP Solution
18.05.2014 13:47:35 Regarding time range: 17.05.2014 - 17.05.2014
18.05.2014 13:47:58 No usage data found
18.05.2014 13:47:58 Failed with sy-subrc: 2
18.05.2014 13:47:58 Job cancelled after system exception ERROR_MESSAGE
Could you please help me to resolve it?
Thanks a lot,
AlexanderWe have a similar Issue SM_CCL:QUAL_XXX_0020275865 was aborted and SAP has suggested the below
The Quality collector job is failing because ATC is not properly configured for the Managed system.
According to SE16 table e2e_efwk_log, there is no ATC data being extracted from the managed system.
I also attempted to run the remote function call SATC_CI_GET_RESULT_CATALOG, and it failed to produce records.
I've attached a link which outlines the method of ensuring ATC is properly configured. (ATC_config).
Once ATC has been properly configured, the QUALITY job should run to completion.
please refer to the below link for setup details
Getting Started with the ABAP Test Cockpit for QMs and Admins -
ERROR VNIC creation job failed
Hello All,
I have brought oracle VM X86 manager into ops center 12c control. When I try to create a new virtual machine it is throwing the ‘ERROR VNIC creation job failed’ error. Can anybody throw some light over this issue.
Thanks in advance.
Detailed log is
44:20 PM IST ERROR Exception occurred while running the task
44:20 PM IST ERROR java.io.IOException: VNIC creation job failed
44:20 PM IST ERROR VNIC creation job failed
44:20 PM IST ERROR com.sun.hss.services.virtualization.guestservice.impl.OvmCreateVnicsTask.doRun(OvmCreateVnicsTask.java:116)
44:20 PM IST ERROR com.sun.hss.services.virtualization.guestservice.impl.OvmAbstractTask.run(OvmAbstractTask.java:560)
44:20 PM IST ERROR sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
44:20 PM IST ERROR sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
44:20 PM IST ERROR sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
44:20 PM IST ERROR java.lang.reflect.Method.invoke(Method.java:597)
44:20 PM IST ERROR com.sun.scn.jobmanager.common.impl.TaskExecutionThread.run(TaskExecutionThread.java:194)
Regards,
georgeHi friends
I managed to find the answer. Internally it is has some indexes in the data base level. It still maintains the indexes in the shadow tables. Those all need to be deleted. With our Basis team help I have successfully deleted those and recreated the indexes.
As Soorejkv said sap note 1283322 will help you on this to understand the scenarios.
Thank you all.
Regards
Ram -
HI All,
We have recently done the Upgrade from BW 3.1 to BI 7.0
There is a issue regarding the POST Upgrade
One Job is failing every day
The name of the JOB is BI_WRITE_PROT_TO_APPLLOG
And the Job log is
06/18/2008 00:04:55 Job started 00 516 S
06/18/2008 00:04:55 Logon of user PALAPSJ in client 200 failed when starting a step 00 560 A
06/18/2008 00:04:55 Job cancelled
00 518 A
This Job is actually running the program
RSBATCH_WRITE_PROT_TO_APPLLOG
when i try to run this program with my user id its working
but with the other user id which it is schedule its failing giving the messages as mentioned in the job log
Kindly suggest me
REgards
janardhan KMaybe it's a dialog and no system or background user. so the job fails.
Regards,
Juergen -
Experts,
We have background job running as part of the daily load. The user who created and scheduled the job, his account diabled recently and that makes job failing. I need to keep that job running but can not figure out how to change the user name in the job. For example, 0EMPLOYEE_CHANGE_RUN job based on event 'zemployee' triggers at the end of employee data load. Can you please provide any hint what should I do to change user name or take the ownership to keep this job running. Thanks.
Regards,
NimeshHello,
Go to SM37--> put job name "0EMPLOYEE_CHANGE_RUN" and user as "*" to get all users.
Now select the job with released status>(Menu)Job>change->Steps-> select 1st row > change(pencil icon)>now you see the user name here.
Change the user name to the user name used for all background job and save.
Done.
Happy Tony -
Error in Control Framework: Background job failed
Hi Experts,
One background job failed with job log: Error in Control Framework in ECC 6.0 system; the job is supposed to produce a XML report. Can anyone please give some idea on this why it could happen? One SAP note 893534 has described same kind of issue but in CRM system. That note even cant be implemeneted in ECC 6.0. Any workaround? Is it a BASIS issue here?
Thanks & Regards,
SKBHello,
please check the variant. We had this problem, and when checking the variant I got a shortdump because the variant did not fit to the program (there were problems with subscreens in the selection screen). After adjusting the variant with program RSVARDOC_610 the variant was ok.
I can not check if this solved the problem because the job runs weekly, and the next job is on Monday. But give it a try...
HTH,
Jens Hoetger -
User, Role, Profile Synchronization Job Fails
Hi Gurus,
When I am scheduling a job the User, Role, and Profile Sync. job fails giving an error
"Cannot assign a java.lang.String object of length 53 to host variable 5 which has JDBC type VARCHAR(40)."
This happens when the synchronization happens with a portal system. We dont have a ruleset for the portal system, So if I put in a "*", it includes this system and results in the error, If I manually select all other system, it works fine. Is there any way to remove this error so that I can schedule the jobs without having to select every system manually.
Regards,
ChinmayaHi,
As per my knowledge, in the Portal system, you should perform only user sync. Roles/profile sync will not work since portal will have workset roles.
Please refer SAP Note 1168120, which may help you to understand the limitations
Hope this helps!!
Rgds,
Raghu
Edited by: Raghu Boddu on Nov 4, 2010 7:39 PM -
Code in before report getting executed but "Job error is: BIP job failed."
Customer is executing a BIP job that fires a pl/sql procedure via before report trigger. Procedure is completing successfully. But the BIP report is not getting generated. ESS process ends in error with the following error:
oracle.as.scheduler.ExecutionErrorException: ESS-07033 Job logic indicated a system error occurred while executing an asynchronous java job for request 604103. Job error is: BIP job failed.
at oracle.as.scheduler.rp.AsyncFinalizeProcessor.processFinalizeRequest(AsyncFinalizeProcessor.java:131)
at oracle.as.scheduler.rp.AsyncJavaSysExecWrapper.finalizeExecution(AsyncJavaSysExecWrapper.java:250)
at oracle.as.scheduler.rp.EndpointProcessor.finalizeExecute(EndpointProcessor.java:1018)
at oracle.as.scheduler.rp.EndpointProcessor.finalizeExecuteWrapper(EndpointProcessor.java:980)
at oracle.as.scheduler.adapter.EndpointImpl.finalizeExecute(EndpointImpl.java:561)
at oracle.as.scheduler.ejb.EssAppEndpointBean.finalizeExecute(EssAppEndpointBean.java:162)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.aop.interceptor.ExposeInvocationInterceptor.invoke(ExposeInvocationInterceptor.java:89)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
at $Proxy197.finalizeExecute(Unknown Source)
at oracle.as.scheduler.ejb.ESSAppEndpoint_t596cy_MDOImpl.__WL_invoke(Unknown Source)
at weblogic.ejb.container.internal.MDOMethodInvoker.invoke(MDOMethodInvoker.java:35)
at oracle.as.scheduler.ejb.ESSAppEndpoint_t596cy_MDOImpl.finalizeExecute(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at oracle.as.scheduler.adapter.ra.rdp.RequestProcessor.invokeFinalizeExecute(RequestProcessor.java:8133)
at oracle.as.scheduler.adapter.ra.rdp.RequestProcessor.execStage_Finalize(RequestProcessor.java:7331)
at oracle.as.scheduler.adapter.ra.rdp.RequestProcessor.process_execute(RequestProcessor.java:4813)
at oracle.as.scheduler.adapter.ra.rdp.RequestProcessor.dispatchHandler(RequestProcessor.java:2833)
at oracle.as.scheduler.adapter.ra.rdp.RequestProcessor.processExecuteEvent(RequestProcessor.java:696)
at oracle.as.scheduler.adapter.ra.rdp.RequestProcessor.processUpdateEvent(RequestProcessor.java:1345)
at oracle.as.scheduler.adapter.ra.WorkUnitWorkerBase.processWork(WorkUnitWorkerBase.java:199)
at oracle.as.scheduler.adapter.ra.WAWorker.run(WAWorke...
Any tips/pointers on possible issues? Could this be a template corruption?Any reply for the above error please.I do have the same issue.
Please suggest. -
Report Job failed when Bursting is used in BI Publisher 11.1.1.5
The Report Job failed when Bursting is used.
error message:
[INSTANCE_ID=aimedap1s.1347261753557] [OUTPUT_ID=1421][ReportProcessor]Error rendering documentoracle.xdo.servlet.scheduler.ProcessingException: [ReportProcessor]Error rendering document
at oracle.xdo.enterpriseScheduler.bursting.BurstingReportProcessor.renderReport(BurstingReportProcessor.java:455)
at oracle.xdo.enterpriseScheduler.bursting.BurstingReportProcessor.onMessage(BurstingReportProcessor.java:127)
at oracle.xdo.enterpriseScheduler.util.CheckpointEnabl
the reproduce steps :
1. Create a Bursting query in the Data Model
2. Create Report Job with the option
"Use Bursting Definition to Determine Output & Delivery Destination" enabled
3.Schedule the report Job
4. run the report and found the status of it is problem, the error message above can be found.
*Note:not all the report job failed when bursting is used, in step1 when set OUTPUT_FORMAT as PDF,HTML,RTF,PowerPoint 2007,
the report will be run successfully,but when set other OUTPUT_FORMAT that list in the following document, the report can not run successfully.
http://docs.oracle.com/cd/E21764_01/bi.1111/e18862/T527073T555155.htm
Adding Bursting Definitions>>Defining the Query for the Delivery XML
>>OUTPUT_FORMAT
Can anyone give some advice on how to troubleshooting it?
Looking forward for your reply
RegardsHello vma.
I happened to find the solution on 11.1.1.3. With xdo-server.jar, you can use DataProcessor class.
For details and sample source code:
http://blog-koichiro.blogspot.com/2011/11/bi-publisher-java-apigenerate-pdf-with.html
* Not sure if it works on 11.1.1.5 though, I hope this gonna help you. -
After Applying 11.1 PSU4/5 the Cognos Enterprise Planner Job fails
We have recently applied Oracle 11.1 PSU5 to our Dev environment. The Application is IBM Cognos Enterprise Planner 8.4 version. The import_queue_tidy job fails with NO ROWS returned. If we use the new DLL to retry within 5 seconds, the job succeeds.
Error Number: -2147220665
Line Number: 220
Description: Unable to get Job Item
The Job management step failed. An attempt has been made to mark the 'IMPORT_QUEUE_TIDY' Job as CANCELLED. Please rectify the problem and re-create a similar Job.
No rows returned by statement
SELECT jobitemguid, identifier, jobitemstateid, sequence FROM indemplwf.P_JOBITEM WHERE jobguid = '{6C44B8D4-AD8F-45E6-9405-EA25E7C2C37F}' ORDER BY sequence
when executed on connection created with connection string of
Provider=OraOLEDB.Oracle;Data Source=****;User ID=******;Password=*********;
See the log file for further details.
After we retry the job succeeds. This error is happening only after we applied the patches. Has any one seen this happening?
The wierd thing is we cannot reproduce this error, it happens randomly. The error didn't happen until 5th run. We had same exact issue when we applied PSU4 and due to schedule conflict we had to rollback. Not sure how to track this issue down. Any help is appreciated.
Edited by: user1260385 on Jan 12, 2011 2:24 PM
Edited by: user1260385 on Jan 12, 2011 2:29 PMThanks for Responding Sri.
Yes I did. Just thought to check with the community if they have seen such issues and any idea as to how to troubleshoot this.
Maybe you are looking for
-
SSL - Always Prompted with "Request Authentication"
Hi, We have developed an Applet which works as an Download Manager and we had it signed as it needs to access the file system of the users. We have two deployment environments one over SSL (Entrust) and other Non-SSL. The signed applet works well ove
-
Keywords PS CC - Number of photos applied to missing and can't search using keywords
Last night in attempting to coordinate/consolidate the keywords assigned to 40k+ photos by over 4 programs the past 2 years I made an error. I had MANY photos with keywords Other/Statuary and I wanted to remove the Other part of the hierarchy and jus
-
Clamshell mode won't work with OSX Lion
I am running a 2010 13" Macbook Pro and a Dell ST2410 23" external display. I have been using an HDMI to mini displayport cable with this setup for over a year without a problem. Now my monitor goes dark when I try to setup the MBP in clamshell mode.
-
How can I configure Robohelp to display search results in DHTML drop-down hotspots?
Hello. We designed our online help using drop-down hotspots (this look is much cleaner to us). Problem is, when a user searches for something and clicks the Search results topic page to find the information, the topic page displays, but does not exp
-
To create a fixed row in the bottom of table and to merge three columns
Hi, I have a table displaying some values but is there any way to get a fixed row at the bottom which will sum the values above. ie service business jan feb mar april table cut 900 100 100 200 chair