Vrf lite and PBR on the same sub interface
Hi,
I have a connection point to point on subinterface between PE and CE and use EBGP as routing protocol. The CE are router Cisco7609 and on the subinterface i apply "ip vrf forwarding WAP". Inside this vpn / vrf that I defined before I want to do pbr, so to route the traffic based on the source Ip address. I cannot use the "vrf select" because it is not supported on this platform. So I would like to know if I can do pbr on this subinterface and how can I do it, just only configuring the "ip policy route-map WAP" under the same sub interface where I confgure ip vrf forwarding?
Thanks
Ira
Use the route map as a noraml thing.
To match the all the ip address there should not be any match statement in the route map.
Similar Messages
-
Does the Flash 8 and Flash Lite 2.0 has the same SWF file format?
Flash Lite 2.0 is based on the Flash Player 7 and supports
most of the features in that version of Flash Player, also, the
Flash Lite 2.0 provides serval features not avaliable in Flash
Player 7.
My Question:
I've download the File Format Specification of Macromedia
Flash (SWF) and Flash Video (FLV) Version 8 from Adobe web site,
but, I don't know whether the Flash Lite 2.0 has the same SWF file
format?
If the SWF file format is different, where can I get the file
format for Flash Lite 2.0?
Thanks in advance.
Sandy.> Flash Lite 2.0 is based on the Flash Player 7 and
supports most of the
> features
> in that version of Flash Player, also, the Flash Lite
2.0 provides serval
> features not avaliable in Flash Player 7.
>
>
My Question:
> I've download the File Format Specification of
Macromedia Flash (SWF) and
> Flash Video (FLV) Version 8 from Adobe web site, but, I
don't know whether
> the
> Flash Lite 2.0 has the same SWF file format?
> If the SWF file format is different, where can I get the
file format for
> Flash
> Lite 2.0?
Yes .. it is a little different .. got some extras and has
some
restrictions. But there is a lot that is the same.
There is a separate section on mobile devices (in the Adobe
site where you
can get info on the format (or at least, there was for flash
lite 1.x) -
Running vrf-lite and dhcp server see 0.0.0.0 as giaddr
Im running vrf-lite and our dhcp server see only 0.0.0.0. Im able to ping vlan10, and see the dhcp request. Running on a 2811. I have limited access to device. Do I need to turn on Dhcp-relay? Verifing ip forward-protocol. Do i need to add " vrf WISP to my helper-address? The interface it sends Dhcp request is also within the vrf. The dhcp scope is part of Vlan10 subnet
int vlan 10
ip vrf forward WISP
ip add x.x.x.x s.s.s.192
ip helper-address x.x.x.xYes and no. It uses another interface thats within the same vrf Wisp. On the other end of the vrf it is forwarded to our global dhcp server. in bold is where the unicast packet are going using the defaultroute
int fast0/0.1
encap dot1q 1
ip vrf forwarding WISP
ip add 172.16.6.2 255.255.255.252
int vlan 10
ip vrf forward WISP
ip add 66.223.195.129 255.255.255.192
ip helper-address 208.138.129.49
ip route vrf WISP 0.0.0.0 0.0.0.0 172.16.6.1 -
We have a CE router connected to PE router. The CE router is connected via 2 links to the PE router, because we need to create two VRFs on the PE for the traffic coming from the CE to separate the traffic, so we have one vrf per link. We are running OSPF between CE and PE.. Now we need to further separate the traffic up to the CE, so Im thinking of using the VRF lite on the CE.. Can MPLS work with the VRF lite, and how to map the VRF lite VRFs on the CE to the MPLS VPN on the PE?
Is there any config examples?
Thanks in advanceVRF Lite and MPLS-VPN act independently so they can work independently. And there is no specific need for mapping. If link is for VRF A on PE so you can make it part of vrf A in CE as well. Both VRFs are independent of each other.
http://www.cisco.com/en/US/products/hw/switches/ps4324/products_configuration_guide_chapter09186a00801cddd9.html#1045190
THis document is for 4500 but logic holds the same. -
Currently have ipod touch 4 and am getting iphone 5c this weekend. Currently our family has several apple devices and they have the same apple ID for itunes and it is the same ID that we use for icloud. I want to set up a separate icloud ID so that it is only on my new device. I still want to keep the same apple ID for purchases. Can I do this and better yet when do I do this...before the purchase, after the purchase and backing up of data. Where do I go to create a new one?
Figured it out. Thanks.
-
My wife and I share the same iTunes account. How do I setup a separate account for her? Can I do it using my iMac?
ThanksUsing More than One iDevice on the Same Computer
This applies mainly to couples who are adding another device and do not want their email, messages, etc. being duplicated on both devices. To begin read: How to use multiple iPhone, iPad, or iPod devices with one computer. You need to establish a separate Apple ID and password for whomever will use the new iDevice. See Apple - My Apple ID and Frequently asked questions about Apple ID. The easiest way is to do this on the computer using iTunes: iTunes- How to set up an Apple ID within iTunes.
On the computer create a new user account for the person with the new iDevice. This will be the user account that person will always use. He/She will no longer use the other user account. This way that person will have a separate iTunes Library
Start by transferring the new device(s) to a new account along with all your data. Save any photo stream photos that you want to keep to your camera roll (unless they are already in the camera roll) by opening your Photos app, tap on Albums icon at the bottom. Now, tap on My Photo Stream album; tap Select; tap on the photos you want to select;, tap the share icon (box with upward facing arrow) in the lower left corner; then tap Save to Camera Roll.
If you are syncing notes with iCloud that you want to keep then you need to open each of your notes and email them to yourself. Later you can copy and paste the text into new notes created in your new account.
Tap on Settings > iCloud > Delete Account (only deletes it from this device, not from iCloud; the person keeping the current account will not be affected,) provide the password to turn off Find My Phone and choose Keep on My iDevice when prompted. Sign in with a different Apple ID to create your new account. Choose Merge to upload your data.
Once you are on separate accounts, you can each go to icloud.com and delete the other person's data from your account.
Note: The essence of the above was created by user, randers4. I
have made substantial changes to improve readability and syntax. -
I have synced my iPhone numerous times and some of the memos in "Voice Memos" on my iPhone wont go over to my iTunes program on my computer. I have a folder titled "Voice Memos" on my iPhone and one of the same name on iTunes on my computer. But after I sync I only get 6 out of the 9 voice memos on my iPhone.
How do I get the rest (or all) of the memos from my iPhone copied to my computer?
Albro P Michell
[email protected]"I have logged in to my itunes account on a different computer and none of my purchased music is showing up."
Correct. it does not magially appear in other places. It will only be where you put it.
"I also have plugged my iphone in to get updates but it says I will lose all media and apps if I don't update on the computer where I sync everything. "
Correct as well. Iphone will sync with one computer at a time. Syncing to another will erase the current content.
You need to copy everything ( itunes library/contacts/pics/calendars/files/docs) from the old computer, or your backup copy of the old one, to the new one. -
My Ipad mini does not see my printer. my wife's ipad2 does. We both use IOS8 and upgraded at the same time. How can I remedy this?
OK great info!
I found 2 possible ethernet to USB adapters:
By "Plugable": USB 2.0 to ethernet LAN wired network adapter - seems this will work, but I'll contact Plugable.
2. Apple USB Ethernet Adapter
Easily connect your MacBook Air computer to an Ethernet network with the Apple USB Ethernet Adapter. Small and light, it connects to the USB 2.0 port of your MacBook Air and provides an RJ-45 connector that supports 10/100BASE-T performance. BUT NOT SURE IF THIS WILL WORK ON ANYTHING BUT a MacBook Air…
One person commented:
This little gem used to be the device of choice for adding a second Ethernet interface to a Mac Mini Server and I'd been using one that way for about a year. After doing a software update to 10.6.6 it stopped working. Forewarned is forearmed – it appears that Apple is finally enforcing the MacBook Air system requirement.
Thanks for any additional comments.
Best regards,
Steve Schulte
Sunday 6 January 2013 -
I downloaded and bought a movie from iTunes on my iPad and now want the same movie on my MacBook Pro but its not offering me to download it, it giving me the options of buying it which I already did. How I get the movie onto my MacBook?
You can connect the iPad to your Mac's iTunes and do File > Devices > Transfer Purchases, that should copy it over to the Movies part of your library.
Depending upon what country that you are in, and whether the film studio allows it, you might also be able to re-download it on your Mac via the Purchased link under Quicklinks on the right-hand side of the iTunes store home page. -
I had 2 iPhone 3G's, one of them screwed up and wouldn't recieve service. Up until then when I backed them up to my computer all was good, then one of them would update and all but a screen would pop up and tell me it couldn't back up to my computer. Recently I replaced the bad tele with an iPhone 4 and it does the same thing while the other iPhone 3G still backs up fine.......What up!!! Help please. Don't wanna lose my info..
I banged my head on the wall with the same problem for two days. Tried everything mentioned, and this worked, finally. The problem is that the backup files are not where you think they are.
You need to delete the MobilSync backup folder. I have a Mac. Went to /Library/Application Support/MobileSync/Backup and deleted the Backup folder.
Fixed the problem. Give it a try and good luck! -
How do i start video and audio at the same time in ios
How do i start video and audio at the same time in ios?
I have tried a lot of different ways but i cant figure it out?
I can get the sound and animation (timeline) to start playing.
There is no problem to start the video and the animation at the same time.
But i cant get both the video and the audio to start playing when i press a button.
It works great in OSX and on windows?
Here is an example:
// insert code for mouse click here
// Play an audio track
sym.$("_1")[0].play();
// Play a video track
sym.$("host")[0].play();
// Play the timeline at a label or specific time. For example:
// sym.play(500); or sym.play("myLabel");
sym.play("marker1");If the game has sound in it (and possibly even if it doesn't) it may be overriding the Music app and causing it to stop playing - in which case there is nothing that you can do about it.
-
Recording Audio and Midi at the same time in Logic 7 Express Can it be done
I am wondering if I can record audio and midi at the same time in Logic 7 Express. I am running my guitar thrugh a Roland GR 33, and a line out and using the GR 33 to trigger sounds in the Logic's synth section but cant seem to record all three tracks at once. If any one knows how let me know. Oh and I am running the GR Synth and Guitar into the Prosonus Fire Fox and have the GR 33 out midi to the Fire Box as well. So I guss the question is how do I sent up two audo tracks and one midi track to record in real time. Thanks Victor
I am wondering if I can record audio and midi at the
same time in Logic 7 Express. I am running my guitar
thrugh a Roland GR 33, and a line out and using the
GR 33 to trigger sounds in the Logic's synth section
but cant seem to record all three tracks at once. If
any one knows how let me know. Oh and I am running
the GR Synth and Guitar into the Prosonus Fire Fox
and have the GR 33 out midi to the Fire Box as well.
So I guss the question is how do I sent up two audo
tracks and one midi track to record in real time.
Thanks Victor
Try arming the audio tracks, select one of the tracks, then while holding down the shift key, select the midi track you want to record, arming the "r" on the midi track. Press "record".....
HL -
Can we use both INSERT and UPDATE at the same time in JDBC Receiver
Hi All,
I would like to know is it possible to use both INSERT and UPDATE at the same time in one interface because I have a requirement in which I have to perform both the task.
user send the file which contains both new and old record and I need to save those in MS SQL database.
If the record exist then use UPDATE otherwise use INSERT.
I looked on sdn but didn't find any blog which perform both the things at the same time.
Interface Requirement
FILE -
> PI -
> JDBC(INSERT & UPDATE)
I am thinking to use JDBC Lookup but not sure if it good to use for bulk record.
Can somebody please suggest me something or send me the link of any blog or anything to solve this problem.
Thanks,Hi ,
If I have understood properly the scenario properly,you are not performing insert and update together. As you posted
"If the record exist then use UPDATE otherwise use INSERT."
Thus you are performing either an insert or an update which depends on outcome of a search if the records already exist in database or not. Obviously to search the tables you need " select * from ... where ...." query. If your query returns some results you proceed with update since this means there are some old records already in database. If your query returns no rows you proceed with "insert into tablename....." since there are no old records present in database.
Now perhaps the best method to do the searching, taking a decision to insert or update, and finally insert or update operation is to be done by a stored procedure in MS SQL database. A stored procedure is a subroutine available to applications accessing a relational database system. Here the application is PI server. If you need further help on how to write and call stored procedure in MS SQL you can look into these links
http://www.daniweb.com/web-development/databases/ms-sql/threads/146829
http://www.sqlteam.com/article/stored-procedures-parameters-inserts-and-updates
[ This part you can ignore, Since its not sure that you will face this situation
Still you might face some problems while your scenario runs. Lets consider this scenario, after the stored procedure searches the database it found no rows. Thus you proceed with an insert operation. If your database table is being accessed by multiple applications (or users) other than yours then it is very well possible that after the search operation completed with a null result, an insert/update operation has been performed by some other application with the same primary key. Now when you are trying to insert another row with same primary key you get an error message like "duplicate entry not possible for same primary key value". Thus you need to be careful in this respect. MS SQL has a feature called "exclusive locks ". Look into these links for more details on the subject
http://msdn.microsoft.com/en-us/library/aa213039(v=sql.80).aspx
http://www.mssqlcity.com/Articles/Adm/SQL70Locks.htm
http://www.faqs.org/docs/ppbook/r27479.htm
http://msdn.microsoft.com/en-US/library/ms187373.aspx
http://msdn.microsoft.com/en-US/library/ms173763.aspx
http://msdn.microsoft.com/en-us/library/e7z8d5hf(v=vs.80).aspx
http://mssqlserver.wordpress.com/2006/11/08/locks-in-sql/
http://www.mollerus.net/tom/blog/2008/03/using_mssqls_nolock_for_faster_queries.html
There must be other methods to avoid this problem. But the point is you need to be sure that all access to database for insert/update operations are isolated.
regards
Anupam -
I backed up my ipad and iphone on the same computer, will it be shown on the same folder or different? Mine is window 7, try to find the back up file follow the step that apple provided, it shown only iphone instead of ipad. Pls help.
What do you see under Edit > Preferences > Devices?
tt2 -
Designer 6i and 10g on the same machine?
I have Designer 6i and corresponding repository on my machine.
The problem with 6i I can't save diagramm in HTML format
I believe I can save in HTML format in 10g or other?
Can I install on the same machine 10g designer?
should I configure new repository?
TIASee my update on your earlier question.
As for running 6i and 10g on the same machine, yes you can do it. You just have to install them in separate Oracle Homes, and be careful when you tell them which version of EXP and IMP to use. There is one MAJOR caveat, however. They cannot use the same Designer Repository - 6i client won't talk to a 10g repository and 10g client won't talk to a 6i repository. You can upgrade a 6i repository to 10g with the RAU, but take a backup before you do - the only way to go back is to restore your backup. Besides, I think that if you upgrade to the last supported version of Designer 6i (you should be able to get it from MetaLink) you will get the Publish Diagrams utility.
Frankly, my opinion is that there is only one reason to stay on 6i - if you need to generate and support 6i client/server Oracle Forms. If you don't use Oracle Forms, or if you have moved on to Web Forms with the middle tier Forms Server, I'd recommend an upgrade to Designer 10g and Developer 10g.
Maybe you are looking for
-
How to retrieve serial number from a SUN Fire V440
Good afternoon, In order to prepare a shipping of some machines, I am trying to collect serial numbers of all of them. One of those is a V440. Normally the way to retrieve the serial number is rebooting the machine, and then the serial number appears
-
Here is the scenario: I start out with my standard contact sheet layout (saved)...6 columns, 6 rows, 8pt type, show file names, etc. The file names are usually long and take up two lines. I adjust my vertical and horizontal spacing so that those file
-
Move Item List in BLOG to new BLOG keep All Enterprise Keywords and Comments.
Hello, I'm new on SharePoint Server 2010. I need a help please. I create Site on BLOG Template. So in my site has a List name POSTs. And I enable Enterprise Keyword on that List. I use this blog and one day,My Posts now has an Error. The structure is
-
How do I get my iPhone to connect to iTunes 7.0.4 for Windows
I just updated my iPhone 5 to the lastest iTunes iOS 7.0.4 and now my iPhone will not show up in my compuer systems or connect to iTunes. What is going on? Was this update on for Mac users or...? Kindest regards, Robert W.
-
I tried to update Iphone 3gs to ios 5 with Itunes. first try,It did sync,posted my name under devices(iphone). Tried to restore,keep recieving error message 14. I ran the diagnostic and it kept saying under Port, it does'nt not find Iphone. Tried EVE