VS 2005 with CR XI R2 version 11 managed DLLs and Viewer

I have a development PC with VS 2005 and I need to interface with CR XI R2 reports.
I wanted to take advantage of Dynamic Graphic Location in CR XI (which the flavor of CR that came with VS 2005 does not have).
I installed CR XI R2 but still found the reference from VS 2005 to the engine was 10.2.51. Similar, the CR Viewer in VS 2005 was 10.2.51
If I build the rpt in CR XI and then run it in a VS project, because the engine is version 10, it ignores the logic wrt dynamic graphic location by formula.
In an attempt to fix, I then built and ran an install that had CR XI merge module. I think this then placed version 11.5.9710.1332s of CR such as CrystalDecisions.CrystalReports.Engine.dll on my PC (but not in GAC). i.e. I found version 11 objects under C:\Program Files\Business Objects\Common\3.5\managed, that I don't think were there before - and if they were I don't know how to get them there again. I did originally install CR XI off a disk that was not R2 - perhaps it was from that? I dunno.
I then referenced the ver 11 engine (and related dlls) in my VS 05 project it seemed to work fine.
My next problem was to get the CR Viewer to work. So, similar to the engine fix, I added the ver 11 viewer to my VS toolbar and manually referenced the ver 11 dlls.
At first this seemed to work - but after I saved and opened another project in VS, when I tried to do the same thing (use ver 11 viewer and reference ver 11 dlls) I got :
Could not load file or assembly 'CrystalDecisions.VSDesigner, Version=11.5.3700.0, Culture=neutral, PublicKeyToken=692fbea5521e1304' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)
I even get this now when I go back to my initial project I tried this in (that did work at first).
So then I went to a clean PC, and installed VS 2005 (including the CR that comes with it), then installed CR XI R2.
That put me back to square one - where I have VS 2005, but it references version 10 CR dlls and viewer (and it doesn't have any of the .NET ver 11 managed dlls).
What is the proper way to get VS 2005 CR references and CR viewer in VS 2005 upgraded so I can take advantage of XI R2 ?
Edited by: al smyth on Aug 13, 2008 10:49 PM

I have given up and found a different solution.
              Upgrade to Crystal Reports 2008 (version 12).
The install detected Visual Studio and seemlessly integrated the assemblies and controls.
BTW - I was very impressed with the install logic and interface in this regard.
Nightmare over.
My understanding of how such an issue came to be is that it is a case of chicken and egg.
In my adventures trying to find an answer, I read that when MS was creating VS 2005, it had to have a commitment date and cut off from CR.
By the time VS 2005 was released CR had advanced and as a result they were out of sync (although I don't understand why I couldn't find any patch or update to VS 05 that would have put the assemblies for managed code in sync with CR XI R2)
So now CR releases CR 2008, and it has finally 'caught up' and provides the needed detection and SDK updates for VS (i.e. now the egg and the chicken co-exist).
I had read a few times on problems such as mine to "uninstall CR and then reinstall". I had done this, and I had tried also on a totally clean PC (in both cases 1st install VS w CR, then install CR XI R2). No dice
I had also read that it could have been because of the flavor of CR (professional vs developer or whatever). But that didn't seem to make sense because I thought CR now basically comes in one flavor - but I don't know exactly when that started.
Thanks to Mark for giving a reply and specifying exact file version and assembly version numbers.
I'll leave this as unanswered for a while just in case there's some poor S.O.B (son of a banker) who cannot upgrade to CR 2008 and is having similar problems.
Now, back to our regularly scheduled programming....

Similar Messages

  • Hi Guys! I have an Imac with Mac OS X version 10.5.8 and bought a wireless keyboard. Unfortunately I can´t use the volume buttons on the keyboard. I have checked almost everything, does anyone have any good idea?

    Hi Guys! I have an Imac with Mac OS X version 10.5.8 and bought a wireless keyboard. Unfortunately I can´t use the volume buttons on the keyboard. I have checked almost everything, does anyone have any good idea?

    Hello, try kguy's solution here...
    https://discussions.apple.com/thread/2332457?start=0&tstart=0
    First, Go to System Preferences, keyboard, and click on the Keyboard tab
    Make sure that the checkbox by "Use all F1, F2, etc, keys as standard function keys" is NOT checked.
    Next, click on the Show All button, and select Bluetooth. You should see your Apple Wireless Keyboard listed on the left side of the screen.
    Click once to select it, and then click the gear icon at the bottom of the box, and choose Disconnect.
    Power off the keyboard by holding down the power button on the keyboard for a few seconds until it show "keyboard Off on your imac screen, then turn it back on again.
    The device should appear once again in your bluetooth list.
    Try out the volume control buttons now, and see if that cleared things up

  • Working with Mulitple BO XI Versions (11, 11.5 and 12)

    I am using the BOE SDK to connect to multiple instances of BO that are at different release levels. Is there any backward compatibility between the version 12 java libraries and previous versions? When I upgraded the libraries, I can connect fine to a v12 instance, but can no longer connect to v11 using sessionMgr.logon(username, password, server, m_authID) throws the following below. Any idea how I can connect using v12 libraries, or are they simply not compatible?
    com.crystaldecisions.sdk.exception.SDKException$OCAFramework: Communication error occurred when trying to connect to server SALES-DEMO.TIDALSOFT.LOCAL:6400 (FWM 01009)
    cause:com.crystaldecisions.enterprise.ocaframework.OCAFrameworkException$CommunicationError: Communication error occurred when trying to connect to server SALES-DEMO.TIDALSOFT.LOCAL:6400 (FWM 01009)
    cause:com.crystaldecisions.thirdparty.org.omg.CORBA.BAD_PARAM:   minor code: 0x0  completed: No
    detail:Communication error occurred when trying to connect to server SALES-DEMO.TIDALSOFT.LOCAL:6400 (FWM 01009)
    detail:Communication error occurred when trying to connect to server SALES-DEMO.TIDALSOFT.LOCAL:6400 (FWM 01009)

    The newest version will not allow you to connect to older versions - specifically done to ensure version correctness.
    The only possible version crossing would be to use Version 11.5 of Web Services Consumer for 11.5 and 12 - but that's only because the Version 12 of the Web Services Provider explicitly has a 'legacy module' to handle requests from the Version 11.5 Consumer.
    In the past, there were people using 11.5 libs to communcate with older versions of Enterprise, but I don't recommend this at all.
    Sincerely,
    Ted Ueda

  • I have a imac 2009 model with osx updated to version 10.5.8 and I can not get update to a 10.6.8 in order to buy osx lion ... what can I do...??thanks

    I have a 2009 imac model with the osx with latest updates to 10.5.8.... and I can not get more upgrades ...
    I need to upgrade to 10.6.7 or later in order to buy osx lion....
    what can I do...??
    thanks
    peto

    http://store.apple.com/us/product/MC573Z/A
    or the family pack of 5 licenses
    http://store.apple.com/us/product/MC574Z/A
    Buy it quick, as many feel that when Mountain Lion comes out SL disks will go to the secondary market at more than $29 for single or $49 for family-pack
    Make a good backup first, preferably a clone, as you may need it if the upgrade does fail.

  • OIM - Users provisioned with different resource form versions

    Hi !!
    we are having some problems with different resource form versions and maybe you can help us.
    We have two different versions of one resource form. One of them has 2 extra fields.
    Some users were provisioned with that resource with the previous form version (no extra fields) and some with the new one (extra fields).
    The problem is that now, if we try to edit that resource for the users with the old version, we are not able to edit or even see the information for those extra fields.
    It seems that they have been associated with the old version and we need to change it in order to make them use the new one. Is that possible? How can we fix that?
    Thanks in advance.

    Alternatively you can manually update the form version in the OIM database.
    If it is a small number of forms it might be easier to do that then to bother with fvc.
    Best regards
    /Martin

  • Problems with downlowding the latest version of iTunes

    Resently there have ben problems with downloading the latest versions of iTunes.
    And also the version 10.6.1.7 I had to reinstall up to four times, undtil the install
    succeeded.
    Normally the updates are running without any problems.
    I have ben iTunes customer several years, and very satisfied with the program.
    Best regards
    Aagevi

    Try downloading iTunes directly from the Apple website -> http://www.apple.com/itunes/download/

  • I have Mac OX version 10.5.8, and I CANT install mac os x version 10.6.2...installer says cannot install this software on this mac.. ?

    I have a Mac with Mac OS X version 10.5.8, and when I try to install the version 10.6.2 the installer says that I cant install this software in my Mac...what can I do ??

    Use a retail DVD and not one which shipped with a Mac. Only 10.6 and 10.6.3 came on retail DVDs.
    (62214)

  • Mismatched dll versions of edk, openfoundation, and portal50?

    Hello all, I'm not sure I'm posting it in the right place, but here it goes.
    I'm developing a custom navigation for PT Portal 5.04. After following all instructions and compiling my source code I noticed a warning VS throws:
    Warning: The dependency 'openfoundation, Version=2.3.1.8, Culture=neutral' in project 'portal50' cannot be copied to the run directory because it would overwrite the reference 'openfoundation, Version=2.5.2.7, Culture=neutral'.
    It appears that portal50.dll references edk.dll (ver. 5.0.2.0) and openfoundation.dll (ver. 2.5.2.7). However, this version of EDK in turn references openfoundation.dll (ver. 2.3.1.8), hence the warning.
    I generally do not like seeing any warning and errors in my code. So my question is, is it possible to obtain EDK that references openfoundation.dll (ver. 2.5.2.7)?
    I can't use EDK (ver. 5.2.0.0) because it references openfoundaiton.dll (ver. 2.7.3.1) while all other libraries still point to ver. 2.5.2.7, nor EDK (ver. 5.1.0.0) for the same reason.
    Thank you for your help,Ruslan.

    No, openfoundation.dll should NOT be added in the GAC.
    It's possible to have multiple version of openfoundation.dll if you have an old version of EDK and update the portal from an older version; however, having multiple versions of openfoundation.dll should not cause any problems, since each component is bounded to a specific version of openfoundation.dll, therefore, each call should be made to the correct version of dll.
    ------- Phil Orion wrote on 5/10/04 2:54 PM -------We have three versions of openfoundation.dll and I would like to know how we got here
    1) 2.0.9.83182) 2.2.3.03) 2.3.1.8
    Lastly, should any of these be in the Global Assempbly Cache?
    Phil Orion | [email protected] | www.orionsmith.com

  • We have moved to another city and we would like to communicate to our friends and family back home via Skype. What webcams work well with our home computer, a vintage 2005 Mac mini with Mac OS X, version 10.5.8?

    We have moved to another city and we would like to communicate to our friends and family back home via Skype. What webcams work well with our home computer, a vintage 2005 Mac mini with Mac OS X, version 10.5.8?

    You 2005 mini shipped with a PowerPC G4 CPU ranging between 1.25 and 1.5 (late sept 2005) Ghz. PowerPC is not Intel. This mini will not run current releases of Skype for the following reasons:
    The current version of Skype claims support for OS X 10.5.8 -- but wants a 1Ghz Intel processor just for voice calls. Their recommendation for video calls is a 1.8Ghz Core 2 Duo Intel CPU and a broadband connection of at least, 4Mbps down and 512Kbps up. Skype requirements.

  • How to enable high availability on SQL Server 2005 with Windows Server 2008 Enterprise R2

    Dear Folks,
    I would like to ask you about this thing. I'm working for IT department for bank in Myanmar. Our bank have up to 96 branches across all of Myanmar including H.O. We are using Microsoft SQL Server 2005 with Windows Server 2008 for our banking
    information system. My main problem is having to backup and restore the database backup files every time the servers in branches goes down for whatever reasons. I want to deploy this feature of high availability and failover cluster using Windows Server 2008
    and SQL Server 2005. Our branches have 2 Servers. One is for Primary and other is for Backup. What I want to do is that, I want to change Backup Server to Primary Server whenever the Primary Server goes down for whatever reasons. All the working data and databases
    from Primary will immediately replicated into Backup Server along with all the IP information of Primary Server. Please give me step by step guide for this process.

    Try below
    http://blogs.msdn.com/b/cindygross/archive/2009/10/23/checklist-for-installing-sql-server-2005-as-a-clustered-instance.aspx
    I will recommend you to upgrade SQL server to newer version for support as well as flexibility.
    Regards,
    Vishal Patel
    Blog: http://vspatel.co.uk
    Site: http://lehrity.com

  • Error with calendar database: Program version 4.2 doesn't match enviroment

    hi!
    im instaling jes in a windows 2000 machine and i get this error when trying to start calendar:
    [21/Aug/2006:16:35:58 +0200] jes csadmind[1752]: General Information: Log created (1156170958)
    [21/Aug/2006:16:35:58 +0200] jes csadmind[1752]: General Notice: Sun Java System Calendar Server 6 2005Q4 (built Dec 27 2005) csadmind starting up
    [21/Aug/2006:16:35:58 +0200] jes csadmind[1752]: General Notice: csadmind attempting to open Counters Database
    [21/Aug/2006:16:35:58 +0200] jes csadmind[1752]: General Notice: csadmind successfully opened the Counters Database
    [21/Aug/2006:16:35:58 +0200] jes csadmind[1752]: General Notice: HTTP Module is refreshing
    [21/Aug/2006:16:35:58 +0200] jes csadmind[1752]: General Notice: csadmind is refreshing
    [21/Aug/2006:16:35:58 +0200] jes csadmind[1752]: General Notice: csadmind is refreshed
    [21/Aug/2006:16:35:58 +0200] jes csadmind[1752]: General Notice: HTTP Module has refreshed
    [21/Aug/2006:16:35:58 +0200] jes csadmind[1752]: General Notice: csadmind argc=1 argv[0]=C:\Sun\CalendarServer\bin\csadmind.exe
    [21/Aug/2006:16:35:58 +0200] jes csadmind[1752]: General Notice: csadmind attempting to open Calendar Database
    [21/Aug/2006:16:35:58 +0200] jes csadmind[1752]: General Error: caldb: Error with calendar database: Program version 4.2 doesn't match environment version
    [21/Aug/2006:16:35:58 +0200] jes csadmind[1752]: General Error: caldb: caldb_InitializeEnvironment: dbenv->open returned 22
    [21/Aug/2006:16:35:58 +0200] jes csadmind[1752]: General Critical: Fatal error 70: Cannot open calendar database
    anyone have faced same problem?
    thanks in advance

    Hi Vyacheslav,
    its wierd that when I run db_stat on windows, for my environment, it works.... I installed Berkeley DB XML 2.4.16 from a self extracting package.
    When I tried running from my Linux box, the error message appear... The native library on my Linux box was built from the zip package dbxml-2.4.16.zip
    Arent they the same?
    Thanks!

  • My ERP 2005 - Is it only UNICODE version ???

    I heard that my ERP 2005 which is based on successor version of NW 04 and which is scheduled to release in Oct 2005 only supports Unicode installations ? I can't find any information on this on SAP website or SAP service market place to validate ? Only thing I know is that SAP will no longer support MDMP installations with mySAP ERP 2005.
    Can someone from SAP answer this for us. If we have French, Spanish and English language used which are code page 1100, are we force to convert to unicode if we have to upgrade to mySAP ERP 2005.
    Thanks,
    Raja

    Hi Max,
    The growth varies based on the DB used. Oracle is based on UTF-8 so it has a variable length for fields. As the field length is variable the size of the DB depends on the characters stored.
    Will you have a large numbers of data using exotic characters (like master data) or will you have minimal use of exotic characters and use more ASCII 7 characters? This has a different impact on DB size.
    This is different for each customer so it hard to give an exact answer. The numbers you see from SAP about DB size are conservative estimates.
    With regard to the size of your DB directly after the conversion.
    The conversion process does a full DB reorg so the actual size maybe reduced. If you have a fully reorged DB before the conversion, then expect the DB growth mentioned in the presentations you have mentioned.
    With regard to runtime of the conversion, there are a number of options available to you to speed the conversion. They are wholly dependent on your downtime needs and the hardware you have available. The optimization options are all based on optimizing data I/O and processing speed. 
    For the latest info, check out the TechEd 2005 presentations on the SAP service marketplace (http://service.sap.com/unicode@SAP).
    I hope this helps,
    Mike.

  • Error export from my database sql 2005 with Windows 2003 abap+java

    Hi all
    I'm trying to create an Export from my database sql 2005 with Windows 2003, but SAPINST starts with an error. ABAP+JAVA stack
    While running the export preparation, I am getting the following error;
    INFO 2010-09-08 12:12:43
    Output of C:\j2sdk1.4.2_13-x64\bin\java.exe -classpath D:\usr\sap\BID\SYS\global\sltools\sharedlib\launcher.jar -showversion -Xmx256m com.sap.engine.offline.OfflineToolStart com.sap.sl.ut.manager.UtlMain
    JRBIWD/sapmnt/BID/SYS/global/security/lib/tools/iaik_jce.jar;
    JRBIWD/sapmnt/BID/SYS/global/security/lib/tools/iaik_jsse.jar;
    JRBIWD/sapmnt/BID/SYS/global/security/lib/tools/iaik_smime.jar;
    JRBIWD/sapmnt/BID/SYS/global/security/lib/tools/iaik_ssl.jar;
    JRBIWD/sapmnt/BID/SYS/global/security/lib/tools/w3c_http.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/sap.comsl.ut.infoprovider_lib.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/sap.comsl.ut.manager.offline.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/antlr.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/exception.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/jddi.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/logging.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/offlineconfiguration.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/opensqlsta.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/tc_sec_secstorefs.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/sap.comtcsdtcvlimpl.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/SDMutil.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/SLUtil.jar;D:\usr\sap\BID\DVEBMGS01\exe\mssjdbc\base.jar;D:\usr\sap\BID\DVEBMGS01\exe\mssjdbc\util.jar;D:\usr\sap\BID\DVEBMGS01\exe\mssjdbc\sqlserver.jar;D:\usr\sap\BID\DVEBMGS01\exe\mssjdbc\spy.jar -export -type=keydb "-expfile=C:/Program Files/sapinst_instdir/NW04S/LM/COPY/MSS/EXP/CENTRAL/AS/PREEXP/usages_data.xml" -log=UTL_load_usages.log -sid=BID -dsn=jdbc/pool/BID -ssprops=D:/usr/sap/BID/SYS/global/security/data/SecStore.properties -ssk=D:/usr/sap/BID/SYS/global/security/data/SecStore.key is written to the logfile C:/Program Files/sapinst_instdir/NW04S/LM/COPY/MSS/EXP/CENTRAL/AS/PREEXP/UTL.java.log.
    WARNING 2010-09-08 12:12:46
    Execution of the command "C:\j2sdk1.4.2_13-x64\bin\java.exe -classpath D:\usr\sap\BID\SYS\global\sltools\sharedlib\launcher.jar -showversion -Xmx256m com.sap.engine.offline.OfflineToolStart com.sap.sl.ut.manager.UtlMain
    JRBIWD/sapmnt/BID/SYS/global/security/lib/tools/iaik_jce.jar;
    JRBIWD/sapmnt/BID/SYS/global/security/lib/tools/iaik_jsse.jar;
    JRBIWD/sapmnt/BID/SYS/global/security/lib/tools/iaik_smime.jar;
    JRBIWD/sapmnt/BID/SYS/global/security/lib/tools/iaik_ssl.jar;
    JRBIWD/sapmnt/BID/SYS/global/security/lib/tools/w3c_http.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/sap.comsl.ut.infoprovider_lib.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/sap.comsl.ut.manager.offline.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/antlr.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/exception.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/jddi.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/logging.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/offlineconfiguration.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/opensqlsta.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/tc_sec_secstorefs.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/sap.comtcsdtcvlimpl.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/SDMutil.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/SLUtil.jar;D:\usr\sap\BID\DVEBMGS01\exe\mssjdbc\base.jar;D:\usr\sap\BID\DVEBMGS01\exe\mssjdbc\util.jar;D:\usr\sap\BID\DVEBMGS01\exe\mssjdbc\sqlserver.jar;D:\usr\sap\BID\DVEBMGS01\exe\mssjdbc\spy.jar -export -type=keydb "-expfile=C:/Program Files/sapinst_instdir/NW04S/LM/COPY/MSS/EXP/CENTRAL/AS/PREEXP/usages_data.xml" -log=UTL_load_usages.log -sid=BID -dsn=jdbc/pool/BID -ssprops=D:/usr/sap/BID/SYS/global/security/data/SecStore.properties -ssk=D:/usr/sap/BID/SYS/global/security/data/SecStore.key" finished with return code 64. Output:
    java version "1.4.2_13"
    Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_13-b06)
    Java HotSpot(TM) 64-Bit Server VM (build 1.4.2_13-b06, mixed mode)
    ERROR 2010-09-08 12:12:46
    CJS-30071  Execution of UTL tool 'C:\j2sdk1.4.2_13-x64\bin\java.exe -classpath D:\usr\sap\BID\SYS\global\sltools\sharedlib\launcher.jar -showversion -Xmx256m com.sap.engine.offline.OfflineToolStart com.sap.sl.ut.manager.UtlMain
    JRBIWD/sapmnt/BID/SYS/global/security/lib/tools/iaik_jce.jar;
    JRBIWD/sapmnt/BID/SYS/global/security/lib/tools/iaik_jsse.jar;
    JRBIWD/sapmnt/BID/SYS/global/security/lib/tools/iaik_smime.jar;
    JRBIWD/sapmnt/BID/SYS/global/security/lib/tools/iaik_ssl.jar;
    JRBIWD/sapmnt/BID/SYS/global/security/lib/tools/w3c_http.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/sap.comsl.ut.infoprovider_lib.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/sap.comsl.ut.manager.offline.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/antlr.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/exception.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/jddi.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/logging.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/offlineconfiguration.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/opensqlsta.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/tc_sec_secstorefs.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/sap.comtcsdtcvlimpl.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/SDMutil.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/SLUtil.jar;D:\usr\sap\BID\DVEBMGS01\exe\mssjdbc\base.jar;D:\usr\sap\BID\DVEBMGS01\exe\mssjdbc\util.jar;D:\usr\sap\BID\DVEBMGS01\exe\mssjdbc\sqlserver.jar;D:\usr\sap\BID\DVEBMGS01\exe\mssjdbc\spy.jar -export -type=keydb "-expfile=C:/Program Files/sapinst_instdir/NW04S/LM/COPY/MSS/EXP/CENTRAL/AS/PREEXP/usages_data.xml" -log=UTL_load_usages.log -sid=BID -dsn=jdbc/pool/BID -ssprops=D:/usr/sap/BID/SYS/global/security/data/SecStore.properties -ssk=D:/usr/sap/BID/SYS/global/security/data/SecStore.key' aborts due to database connection error with return code 64.<br>DIAGNOSIS: The connection parameters are wrong or the database server is shutdown.<br> SOLUTION: Check 'UTL_load_usages.log' and 'C:/Program Files/sapinst_instdir/NW04S/LM/COPY/MSS/EXP/CENTRAL/AS/PREEXP/UTL.java.log' for more information.
    ERROR 2010-09-08 12:12:46
    FCO-00011  The step getUsageTypes with step key |NW_Prepare_Export|ind|ind|ind|ind|0|0|NW_Java_Prepare_Export_Dialog|ind|ind|ind|ind|5|0|getUsageTypes was executed with status ERROR .
    Could anyone please help me out on this, if possible?
    Thanks
    JM

    Hi,
    please ensure that you use a SAP supported JDK as below:
    716604    for the Sun JDK (Windows, Linux, Solaris)
    709140    Recommended JDK and VM Settings for the WebAS630/640/7.0
    And the re try the export pls.
    Regards,
    Snow

  • Visual Studio 2005 with SP1 for Windows 7 - 64 bit

    Hi,
    I am trying to install Visual Studio 2005 on a 64-bit platform (Windows 7). The version in about section reads Version 8.0.50727.42
     (RTM.050727-4200)
    I need to install the Service Pack 1 for Visual Studio 2005 but the installer available is for 32 bit (VS80sp1-KB932232-X86-ENU.exe)
    This does not install on 64 bit system. 
    How do I get Visual Studio 2005 with SP1 installed ? 
    P.S- On the network I work on, I can see a Windows 2008 (64 bit) system with the version of Visual Studio 2005 that reads  Version
    8.0.50727.762  (SP.050727-7600) but I dont know how that was installed. Any help would be
    appreciated.
    Thanks,
    Wilson 

    Hello WillisB,
    I think your concern is the name X86 here. Actually Visual Studio is x86 version and we do not have a x64 version Visual Studio. So if you install Visual Studio on X64 version, it is also available. And when you see this page
    http://www.microsoft.com/en-hk/download/details.aspx?id=7524 You can see the system requirements:
    Supported Operating System
                        Windows 7; Windows Server 2008; Windows Server 2008 R2; Windows Vista                
    Processor/RAM: 
    Vista hardware requirements.
    Required Software:  licensed copy of a Visual Studio 2005 and Visual Studio 2005 Service Pack 1.
    So please don't mind the name x86, the update can still be installed on Win 7 x64.
    By the way, to install Visual Studio 2005 on Win 7, please check YiChun's post on this thread:
    https://social.msdn.microsoft.com/Forums/vstudio/en-US/f75d8ff2-bed4-473b-bc9c-6faf78c5d83a/installing-visual-studio-2005-pro-on-windows-7-pro-64bit?forum=vssetup
    "To apply Visual Studio 2005 on Windows 7, please check the following points step by step:
    - Download Visual Studio 2005 SP1 and install it
    Visual Studio® 2005 Express Editions Service Pack 1
    Visual Studio® 2005 Service Pack 1 for Standard or above edition
    - Download
    Visual Studio 2005 Service Pack 1 Update for Windows Vista and install it
    - When launch Visual Studio 2005, please run it with administrator privileges
      (Right-click the icon >> "Run as Administrator")"
    By the way, Visual Studio 2005 is out of our mainstream support, what about change to use some new version of VS? For example, Visual Studio 2013 Community version.
    Best regards, 
    Barry
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • I have a macbook pro version 10.7.5 and my mailbox will not open at all and comes up with a quit message even though it is not open. how can i get into my account. it works on my iPhone an i have internet and all other functions working on my computer

    I have a macbook pro version 10.7.5 and my mailbox will not open at all and comes up with a quit message even though it is not open. how can i get into my account. it works on my iPhone and i have internet and all other functions working on my computer

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Step 1
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
    Step 2
    In the Console window, look under User Diagnostic Reports (not "Diagnostic and Usage Messages") for crash reports related to the crashed process. The report name starts with the name of the process, and ends with ".crash". Select the most recent report and post the entire contents—the text, not a screenshot. I know the report is long. Please post all of it anyway.
    In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
    Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

Maybe you are looking for

  • How can i save the output  of  report into  a file,.

    Hi friends,              i was create a executable program .. it was executing fine.. imagine.. my program is just fetching the data from  LFA1  table based on some conditions.. every thing is fine.. and i'm getting the output also.. but i want to sa

  • Discrete time range over date range  (using CR X1)

    Post Author: sjr CA Forum: Formula Can anyone show me how to select data over a discrete time range i.e. 6 p.m. till 11 p.m. per day, over a period of a month ? Using the data time parameter gives me data from 6p.m. on startdate right through till 11

  • How to write a view

    thanks Edited by: 786304 on May 25, 2011 12:18 PM

  • Problems with IWorks

    I had to restore my Mac, and saved everything I had to a hard drive, reinstalled OS, and then Snow Leopard, and then iWork. Thinking that all my documents and such were safe and accessible I now find that when I open Pages I can't use the program, te

  • Flex  ResultEvent - result

    Hello, I have a WebService (Axis 1.4) at the backend and if I invoke a method of the WebService: I get the following result with (data as ResultEvent).message: (mx.messaging.messages::AcknowledgeMessage)#0   body = "<?xml version="1.0" encoding="utf-