VS 2012 does not finish starting after installing ODAC 11.2 Release 5

I installed the ODAC 11.2 Release 5 (11.2.0.3.20) with Oracle Developer Tools for Visual Studio. When VS 2012 restarts the splash page comes up with a message to wait while an operation completes but it never does. Does anyone have an idea as to what the problem may be?
Running Win 7 Pro with VS 2012 Ultimate.
Paul

I would like to add some additional information to the above post. I am receiving the same error using the new release. The beta release worked fine. I completely uninstalled the beta and then installed the new release. Once installed, VS2012 stopped working. The splash screen comes up and then the little box stating that it is waiting for a background process to complete is displayed. That is it. From what I can tell, it is in a userwait state.
Unfortunately, when I uninstalled the component, it left some artifacts behind. When I now start VS2012, I get errors stating that Oracle ODT did not load correctly and then VS2012 stops working and exits. I am running VS2012 as administrator.
This behavior is exhibited on both Windows 8 and Windows7 Home Ultimate (both 64bit) and VS2012 ultimate.
The activity log shows what is giving the error, shows the following:
<entry>
<record>270</record>
<time>2012/09/17 11:57:57.734</time>
<type>Information</type>
<source>VisualStudio</source>
<description>Begin package load [Oracle Developer Tools for Visual Studio]</description>
<guid>{D601BB95-E404-4A8E-9F24-5C1A462426CE}</guid>
</entry>
<entry>
<record>271</record>
<time>2012/09/17 11:57:57.738</time>
<type>Error</type>
<source>VisualStudio</source>
<description>CreateInstance failed for package [Oracle Developer Tools for Visual Studio]</description>
<guid>{D601BB95-E404-4A8E-9F24-5C1A462426CE}</guid>
<hr>80070002</hr>
<errorinfo>Could not load file or assembly 'Oracle.VsDevTools.11.0, Version=4.112.3.20, Culture=neutral, PublicKeyToken=89b483f429c47342' or one of its dependencies. The system cannot find the file specified.</errorinfo>
</entry>
<entry>
<record>272</record>
<time>2012/09/17 11:57:57.738</time>
<type>Error</type>
<source>VisualStudio</source>
<description>End package load [Oracle Developer Tools for Visual Studio]</description>
<guid>{D601BB95-E404-4A8E-9F24-5C1A462426CE}</guid>
<hr>80004005 - E_FAIL</hr>
<errorinfo>Could not load file or assembly 'Oracle.VsDevTools.11.0, Version=4.112.3.20, Culture=neutral, PublicKeyToken=89b483f429c47342' or one of its dependencies. The system cannot find the file specified.</errorinfo>
</entry>
The above entry was thrown when VSDevTools had been removed from the system.
Unfortunately, I did not get any information about what exactly was causing the wait state when the Dev Tools for VS was installed. From Process Explorer, I could see that msenv.dll was chewing through cycles, waiting for multiple objects. I have stack prints for devenv.exe and msenv.exe as well as a thread screenshot if anyone is interested in seeing them.
Hopefully this will shed some light on what needs to be fixed.
Thanks,
Craig D.

Similar Messages

ADFS 2.0 service does not automatically start after reboot

Hello,
We have two ADFS 2.0 servers in a farm. Any time these servers reboot, the ADFS service does not automatically start, even though the service is set to auto start. If I manually start the service it starts within 10 seconds.
The error in the logs show:
A timeout was reached (30000 milliseconds) while waiting for the AD FS 2.0 Windows Service service to connect.
The AD FS 2.0 Windows Service service failed to start due to the following error:
The service did not respond to the start or control request in a timely fashion.
But after the reboot is completed, I can manually start the service with no problems. Again, this ONLY happens on restart. I've searched the forums and found potential solutions for people who have consistent issues with starting ADFS every time.
Any ideas?

UPDATE - I built a 3rd ADFS server and was unable to reproduce the problem, until...
I went in to the service properties of ADFS and saw that even though I specified a Log On As account during the ADFS wizard, it changed itself back to "Network Service". I re-entered our ADFS service account username and password, it was
accepted, and I rebooted. On the next reboot, the service did not start automatically (with the same errors as the other ADFS servers), but I was able to manually start it.
I then went to the original ADFS server having the problem, switched it to use "Network Service", rebooted, and the service started up properly on reboot. I then changed it back to the named domain service account, and the issue came right
back. There are no other errors in the System Log indicating a problem with anything else.
So my guess is that something is happening to prevent the service from starting with the named Domain account on server reboot. But what?

TS1424 Apple Mobile device does not show up after installing 10.0.7.21

Receive message "Apple Device not started". Apple Device does not show up in Adminstrative Tools, Services. Windows 7 64bit, IOS6.0.1.

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if a component such as Apple Mobile Device Support won't install normally.
tt2

Adobe media player does not have content after install.

I just got into school for web development and they sent the cs5 master suite, adobe media player came with it. After installing it and logging in, I went to the adobe tv site and seen a slew of tutorials that I would love to use with adobe media player. Everything I do will not add the videos, adding the rss feed only says its not available and there is nothing in it at all. I am very disappointed in this. Hopefully I am doing something wrong.
Please advise

Thank you very much Craig for your help.
For some reason that section on Flash Builder in a Week;
+ Want to view Flex in a Week videos in offline mode?
was not displaying on my browser page. I re-installed java and it now seems to work all ok, and it along
with your advice addresses the issue.
Fritz

Adobe illustrator does not open files after install on windows

after installing ai on a second pc, the program opens, but when trying to open a file, i get an error message saying...."does not function anymore" (translated from german into english)
I am logged in in cc, closed ai on the mac so only one program is (should) be running.
any idea what is wrong?
thks
Hubert

Moving this discussion to the Illustrator forum.

MacBook Air does not finish start up and has a white screen, any suggestions?

It seems like the start up disk is full, but I can only restart or shut down

Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Freeing Up Space on The Hard Drive
1. See Lion's Storage Display.
2. You can remove data from your Home folder except for the /Home/Library/ folder.
3. Visit The XLab FAQs and read the FAQ on freeing up space on your hard drive.
4. Also see Freeing space on your Mac OS X startup disk.
5. See Where did my Disk Space go?.
6. See The Storage Display.
You must Empty the Trash in order to recover the space they occupied on the hard drive.
You should consider replacing the drive with a larger one. Check out OWC for drives, tutorials, and toolkits.
Try using OmniDiskSweeper 1.8 or GrandPerspective to search your drive for large files and where they are located.

HELP ME T23 does not boot anymore after installing a Lenovo update. Any idea?

Hi, I installed the updates and later I shut down the laptop as requested. Later that day I wanted to start it again but nothing happend other than the little round green light next to the switch button goes on. The monitor stays black. I removed the batterie and plug (the batterie is dead anyway) but that did not help. I believe my harddrive made noise lately, too. Is that the end?

I was able to eject the dvd by pressing the usb mouse left button while booting. Then put it back in after a reboot
After that selecting the alt-key, i selected the install dvd, and after a while (gray background and spinning weel) it took me again to the installation screen.
Will tell you if it is working in a while...

IMac 24" does not boot up after Installing 10.6

Hi,
Last night i did the upgrade, well i put the dvd and clicked install, it rebooted, install everything.
Then i saw the screen saying that the install was completed (hope it meant: upgrade!!!).
But then, i just see the white background a the little circle running... after 1 hour same thing... So i shut it down, and restart, same thing ?
What is going on ? The installation manual was not clear about performing an update !
Any idea how i can fix this ?

I was able to eject the dvd by pressing the usb mouse left button while booting. Then put it back in after a reboot
After that selecting the alt-key, i selected the install dvd, and after a while (gray background and spinning weel) it took me again to the installation screen.
Will tell you if it is working in a while...

Powerbook does not finish start up

My Powerbook began yesterday to power on, go as far as the window where MAC OS-X is loading and then stops before the login window comes up. Just shows a blue screen. The mouse will move about. HELP!

I'm sorry I should have clarified that a little better. On your desktop should be the icon for the main hard drive. Double click that then look for the folder labeled Library. Once inside that folder look for one labeled Starup items. See if there is anything in that folder. If there is you can remove it and put it either on the desktop or in the trash (don't empty the trash yet as you may want to recover these files later if they're not corrupted). The iTunesHelper and SystemEvents should not be disrupting the login window. As a test however you can uncheck both of those items and see it the computer will start up normally (don't hold the shift key down). I don't know if you've made any recent changes to the system like installing applications or connecting a printer maybe?? Please post back with your progress.
Jrsy

On my MacBook with Lion Safari does start, does not react immediately after trying to open it. Installing a new Safari does not help. Removing parts of Safari in the Library did not help. Where can I find and remove all components (LastSession ...)?

How can I reset Safari with all components? On my MacBook with Lion, Safari does not start, does not react immediately after trying to open it. Installing a new Safari does not help. Removing parts of Safari in the Library does not help. Where can I find and remove all components as LastSession and TopSites?

The only way to reinstall Safari on a Mac running v10.7 Lion is to restore OS X using OS X Recovery
Instead of restoring OS X in order to reinstall Safari, try troubleshooting extensions.
From the Safari menu bar click Safari > Preferences then select the Extensions tab. Turn that OFF, quit and relaunch Safari to test.
If that helped, turn one extension on then quit and relaunch Safari to test until you find the incompatible extension then click uninstall.
If it's not an extensions issue, try troubleshooting third party plug-ins.
Back to Safari > Preferences. This time select the Security tab. Deselect: Allow plug-ins. Quit and relaunch Safari to test.
If that made a difference, instructions for troubleshooting plugins here.
If it's not an extension or plug-in issue, delete the cache.
Open a Finder window. From the Finder menu bar click Go > Go to Folder
Type or copy paste the following
~/Library/Caches/com.apple.Safari/Cache.db
Click Go then move the Cache.db file to the Trash.
Quit and relaunch Safari to test.

There is a problem on my mac mini. I install windows7 in my mac then i cancelled the installation did not finish..after that i saw the black screen on my monitor..

There is a problem on my mac mini. I install windows7 in my mac then i cancelled the installation did not finish..after that i saw the black screen on my monitor untill now the monitor is black..

It maybe trying to boot from the incomplete install.
Try starting your Mac while holding down the Option key, it should then list all the available boot drives including the Mac OS X one. Boot from the Mac one and then you can wipe the damaged PC one or set the Mac to stay booting in to OS X.

In IPhoto, after I submit my book to the Apple store, it shows it uploading, but does not finish the process.

after I submit my book to the Apple store in I photo, it shows that it assembles and uploads, but does not finish the process. I cannot use the cancel button and have to force quit IPhoto to get out of the process.

Assuming you're referring to iPhoto on your Mac here are some potential fixes you can try:
1 -
Go to the System/Sharing preference pane and make sure Remote Apple Events is checked. If it is, uncheck it and then recheck and try ordering again.
2 -
Quit iPhoto.
From the Finder menu bar, choose Go > Utilities to access your Utilities folder (or press Shift-Command-U).
In your Utilities folder, open Keychain Access.
Find the "NetServices" entry in your Keychain Access window.
Select the "NetServices" entry and press the delete key.
Reopen iPhoto and attempt to place your order again.
You should be prompted to enter your account information if you deleted the Keychain entry successfully.
After entering your account information, you should be able to complete your order.
3 -
Boot into Safe Mode, Mac OS X: Starting up in Safe Mode, and try ordering from there.
Note: Create a proof pdf file of the book as described in this Apple document, iPhoto, Aperture: Previewing an order in iPhoto or Aperture, before ordering the book and keep the pdf file to compare with the printed copy when it arrives.

Creating Oracle Inventory Installation Step Does Not Finish and Hangs at 99% while installing Hyperion 11.1.1.4

Hi Guys,
Creating Oracle Inventory Installation Step Does Not Finish and Hangs at 99% while installing Hyperion 11.1.1.4.I'm running the installer from a local drive and also noticed that the uninstaller files are not created.The installer process has been running for 4+ hours.
Any suggestions/tips?
Thanks
Manoj

hi John,
we left the installer running overnight, but the install process has still not completed.Also it has not created any uninstaller files under the following directory:
E:\APPS\Hyperion\uninstall
what could be the reason for that?
Thanks.
Manoj

Ipod touch for Christmas, but cannot get started: after installing itunes, when connecting to my laptop I get no instruactions, just the error message "This iPod cannot be used because the Aplle Mobile Device service is not started". Any suggestions???

ipod touch for Christmas, but cannot get started: after installing itunes, when connecting to my laptop I get no instruactions, just the error message "This iPod cannot be used because the Aplle Mobile Device service is not started". Any suggestions???

Jennifer...
Follow the instructions here > iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows

Since yesterday I am facing problem,when it goes in sleep mode it actually turn off and does not come up after pressing start button but every time I have to hard reset it.It is 4 gen running on 4.3.3

Since yesterday I am facing problem,when it goes in sleep mode it actually turn off and does not come up after pressing start button but every time I have to hard reset it to turn it on .It is 4 gen running on 4.3.3.Please help

so I have called HP tech support 12 times over the last 6 weeks and still my HP Officejet 4620 loses connection overnight. Of course becasue it was a birthday present I spent more time than I normally would have on this issue. While the tech are very polite they have not fixed my problem and now it is too late to return printer to store. This is a lot of money wasted and I think they need to admit this is a bug in this printer and resolve the problem!!!!!

VS 2012 does not finish starting after installing ODAC 11.2 Release 5

Similar Messages

Maybe you are looking for