VS Load Test : Unable to execute a 672 hour load test
Hi Team,
We keep running endurance tests for a very long time and today we tried to run a 28 day test (672 hours). However below ERROR keeps coming and we can not proceed with load test.
Error occurred running test. Could not run load test <loadtestname> on agent <agentname>. Number must be either non negative and less than or equal to Int32.MaxValue or -1.
Parameter Name : millisecondsTimout
However, we are able to run a 590 hours load test. but problem is seen only we go around 600 something duration.
Other Details:
VS Version : 2012
Rig Setup ? : No
Run Type : Local Run
Please let me know if you need any more details
Thanks and Regards,
Gaurav
Hi Gaurav,
According to your description, please you share me the load test error log.
In addition, I suggest you try to create a yourself testsetting file and then add more time and then call the testsetting file run the load test check this issue again.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.
Similar Messages
-
Hi everyone,
I'm following the test cases specified in the AirPlay Product Compliance Test R6 Document for AirPlay. I'm unable to execute the below test cases when I'm testing for airPlay certification. There is no option in the latest Airport Utility on Macbook for executing these test cases,
Is it mandatory to execute and pass these test cases? How do I do it?
3.2.1.3 Link Layer Connection 10 Mbps/Full Duplex
3.2.1.5 Link Layer Connection 100 Mbps/Full Duplex
Thanks in advance for your help.
SripadDiane,
Thank you very much for the response.
I will email you the screen shots since I can not attach them to this post.
You will see in the screen shots that I don't see either a green or red light after I have clicked on the record topic icon from UPK Developer. Even after I put focus on the title bar of the app I am recording and press the printscreen button, there is no green or red light.
But now, when I do press the printscreen button, UPK does actual record something. That is further than I have gotten before.
Before I posted the forum, I was not able to record anything after several attempts and also several re-installations. But I was told that if I don't see the green or red light, I won't be able to record anything.
I am now wondering if the use of Hypersnap 6 could be impacting UPK? I use Hypersnap a lot and when I pressed the printscreen button, Hypersnap also takes a screenshot.
My question now is whether the lack of green and red lights will impact my use of UPK?
Thanks
Chris
Edited by: user455985 on Dec 22, 2010 2:04 PM -
Unable to execute Test-Mailflow cmdlet. Could not find any available Domain Controller
I started receiving this error in SCOM while testing Exchange 2007 Mail flow. Normally the tests work just fine, and when I execute"test-mailflow" on the offending server, it works just fine. The alert doesn't have enough details to find out what
is wrong. Can anyone help out?
Alert Description:
Unable to execute Test-Mailflow cmdlet. Could not find any available Domain Controller
Environment: SCOM 2012 R2 UR4
MP: Exchange 2007 MP, latest update
Monitor: Exchange 2007 Test Local Mail Flow Monitor
Brody KilpatrickHi,
After you execute"test-mailflow" on the offending server, please also look into event logs to check is there any errors or warnings. SCOM is a tool to collect information, from my point of view, this message is collected from Exchange server, so
you may need to check event viewer.
In addition, please also make sure your Exchange environment is under monitored. And have you followed the Exchange 2007 MP guide to configure the MP?
Make sure the Client Access Server is under monitored, you may check the Application Event log on the Client Access Server, and make sure there are no errors or warnings indicating a problem with the Client Access Server.
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] -
I am unable to execute jar files and applets. Also, the Java Web Start and the Java Plugin Control Panel will not load. I have unloaded the JRE and installed other versions. To date I have loaded and unloaded the following:
1.4.1
1.4.2_01, _02, _04
1.4.2_04 SDK
But no change in the outcome.
The javaw application starts but does not load the jar file.
The applets and jar files run fine on other computers with any of those JRE/SDK's installed.
Any suggestions would be helpful.Command line
To create a JAR file >jar cvf filename.jar filename.class(s)
To view the contents of a JAR file >jar tvf filename.jar
To extract the contents of a JAR file >jar xf filename.jar
To extract specific files from a JAR file >jar xf filename.jar archived-file(s)
To run an application packaged as a JAR file
>jar xvf filename.jar META-INF/MANIFEST.MF
The above will place META-INF/MANIFEST.MF file in your working directory. Open this file in text editor. Under Version, type in
Main-Class: filename
example;
Manifest-Version: 1.0
Main-Class: SelectPurchase
Created-By: 1.3.0 (Sun Microsystems Inc.)
save file
update META-INF/MANIFEST.MF file in jar file with;
jar umf META-INF/MANIFEST.MF filename.jarto run jar file from command line;
java -jar filename.jarTo run an application packaged as a JAR file
(version 1.1) jre -cp app.jar MainClass
(version 1.2 -- requires Main-Class
manifest header)
To invoke an applet packaged as a JAR file <applet code=AppletClassName.class
archive="JarFileName.jar"
width=width height=height>
</applet>
Does anyone know how to get the application to run by clicking on a Desktop Icon? -
Unable to execute update commands after improper shutdown
Hi!
It sounds a little strange.
I am unable to execute update commands from my application. My machine was shutdown improperly. Then I loaded the datastores again. I was able to execute select commands but unable to execute update commands. It was working fine before shutdown.
Regards
/AhmadHi Chris!
SQLExecute method of ODBC is returning -1.
I have checked the syntax of the query its also correct. I am also very confused on it why is this happening. If I execute the update command from ttisql it works ok.
The code is the same that we discussed in our previous conversation.
The steps I did after improper shutdown:
1. Started TimeTen daemon >ttdaemonadmin -start
2. Loaded the Data store >ttAdmin -ramLoad spiderM
3. Executed the code
The output of ttstatus is as follows:
TimesTen status report as of Fri Jun 29 21:45:41 2007
Daemon pid 8273 port 17001 instance tt70
TimesTen server pid 8284 started on port 17003
TimesTen webserver pid 8280 started on port 17005
Data store /tmp/spiderM
There are 6 connections to the data store
Data store is in shared mode
Shared Memory KEY 0x08004f3c ID 557070
Type PID Context Connection Name ConnID
Subdaemon 8278 0x0000000000570520 Worker 2042
Subdaemon 8278 0x00000000005dc4d0 Flusher 2043
Subdaemon 8278 0x000000000060d5d0 Checkpoint 2044
Subdaemon 8278 0x000000000063e5a0 Aging 2045
Subdaemon 8278 0x000000000066f570 HistGC 2046
Subdaemon 8278 0x00000000006a0430 Monitor 2047
RAM residence policy: Manual
Data store is manually loaded into RAM
Replication policy : Manual
Cache agent policy : Manual
Data store /usr/users/spider/TimesTen/tt70/info/TT_tt70
There are no connections to the data store
Replication policy : Manual
Cache agent policy : Manual
Access control enabled.
End of report
Regards
/Ahmad -
SharePoint 2010 Unable to execute query: Error 0x80131530
I am seeing the below error message in the ULS logs while accessing some set of items in the list and the item will not get
opened after long tim.
"Unable to execute query: Error 0x80131530
Unknown SPRequest error occurred. More information: 0x80131530
System.Web.HttpException: Request timed out."
This list has 202 items in total with 45 columns in total (includes
5 lookup columns, 3 append history columns).
Items which has more than 20 versions is not loading.
In the same site, there is another list of the same template with 2009 items and some items with more
than 80 versions works fine.
Please let me know if you have any suggestion to fix this.Yes there are 2 simple SPD workflows. One of the workflow operation is to send email and other one is to create an item in another based on condition.
The other list which works fine also has similar SPD workflows. -
Text Message: Unable to execute file for security ...
Whenever I'm viewing a text message, when I try to open up the "Options" menu, I see the above message, "Text Message: Unable to execute file for security reasons". This doesn't seem to impact the functionality of the menu at all, everything seems to work.
Anyone ever come across this before?
I've updated the phone (Nokia E66) to the latest software, and I've only got one application installed other than the default base install (Google calendar sync utility), removing that doesn't change the problem.
Thanks in advance!I get the same error after SW update to latest version when I try to run some apps
-
Dear Friends
I am stuck in CONFIGURATION PHASE of EHP5 Upgrade.
The ABAP phase has been completed but stuck in the Java processing INPUT_ADM_USER_PWD
"unable to execute the SDT request Java_EE operation configure on
hostname dbserver1 instance 02 Modules execution failed.
Execution of the unit PREPARE failed. Connection to the Upgrade Tool was closed."
TROUBLE TICKET LOG
Trouble Ticket Report
Installation of enhancement package 1 for SAP NetWeaver 7.0
SID................: $(/J2EE/StandardSystem/SAPSystemName)
Hostname...........: $(/J2EE/SAPGlobalHost)
Install directory..: $(/J2EE/StandardSystem/SAPSIDDirectory)
Upgrade directory..: $(/JUMP/DIR/MAIN)
Database...........: $(/J2EE/DBSystem/DBInfoName)
Operating System...: $(/J2EE/StandardSystem/ServiceInstance/BCCentralServicesInstanceHost/OpSysType)
JDK version........: $(/SystemProperties/JavaVersion) $(/SystemProperties/JavaVendor)
SAPJup version.....: $(/MAIN_VERSION)
Source release.....: $(/ER_CODE)
Target release.....: $(/J2EE/ShadowSystem/Version)
Start release SP...: $(/J2EE/StandardSystem/SPLevel)
Target release SP..: $(/J2EE/ShadowSystem/SPLevel)
Current usages.....: $(/J2EE/StandardSystem/Usages/StrCurrentUsages)
ABAP stack present.: $(/J2EE/StandardSystem/BCSystemPresent)
The execution of ended in error.
Could not perform operation on secure store. See previous messages.
Could not perform operation on secure store. See previous messages.
Class com.sap.security.core.server.secstorefs.SecStoreFS method createStoreWithEncryption has thrown the exception com.sap.security.core.server.secstorefs.FileIOException
com.sap.security.core.server.secstorefs.FileIOException: I/O error on file "e:\usr\sap\PRD\SYS\global\security\data\JUpgrade.key".
java.io.FileNotFoundException: e:\usr\sap\PRD\SYS\global\security\data\JUpgrade.key (The system cannot find the path specified)
More information can be found in the log file .
Use the information provided to trouble-shoot the problem. There might be an OSS note providing a solution to this problem. Search for OSS notes with the following search terms:
com.sap.sdt.util.secstore.SecureStoreException
Could not perform operation on secure store. See previous messages.
INPUT_ADM_USER_PWD
INIT
PREPARE
NetWeaver Enhancement Package Installation
SAPJup
Java Enhancement Package Installation
Regards
Anwer Waseem
Edited by: Anwer Waseem on Nov 9, 2011 11:48 PMTROUBLE TICKET LOG
Trouble Ticket Report
Installation of enhancement package 1 for SAP NetWeaver 7.0
The execution of ended in error.
Could not perform operation on secure store. See previous messages.
Could not perform operation on secure store. See previous messages.
Class com.sap.security.core.server.secstorefs.SecStoreFS method createStoreWithEncryption has thrown the exception com.sap.security.core.server.secstorefs.FileIOException
com.sap.security.core.server.secstorefs.FileIOException: I/O error on file "e:\usr\sap\PRD\SYS\global\security\data\JUpgrade.key".
java.io.FileNotFoundException: e:\usr\sap\PRD\SYS\global\security\data\JUpgrade.key (The system cannot find the path specified)*
its locating on drive e:\ which is wrong directory, the global directory are avaiable on drive S:\; this is the reasons that processing are ending with error.
Please advise how to resolve ASAP.
More information can be found in the log file .
Use the information provided to trouble-shoot the problem. There might be an OSS note providing a solution to this problem. Search for OSS notes with the following search terms:
com.sap.sdt.util.secstore.SecureStoreException
Could not perform operation on secure store. See previous messages.
CHECK_PREPARE_UNIT
Regards
Anwer Waseem -
Unable to Execute a Report to send PAN XML messages out of SNC
Hi All,
We are unable to Execute a Report /SCA/DM_TIMESERIES_OUT to send Product Activity Notifications in the form of XML messages out of SNC. We have manitained some Planned Reciepts data in SNC and would like to transfer it out to ECC.
Could anyone help in understanding if we have to maintain mandatory settings before executing this report.
Thanks & Regards,
SadiqHi Pravin,
As per the documentation(http://help.sap.com/saphelp_snc70/helpdata/EN/48/6bdb4767a431cbe10000000a42189d/frameset.htm), we have tried both the manual and automatic features to configure the output from SNC in the form of XML messages.
The manual method gave a message "Time series data for selection is empty" and the Automated method could trigger the XML messages on every incoming message from ECC but we are unable to see the Planned Receipts in that XML messages.
Was just wondering if we can see the Planned Receipt info by changing the settings of this report or by using any other simillar report as the PR info is very important for our development.
Thanks & Regards,
Sadiq -
Error while checking in a document: Unable to execute service
Hi,
I am using oracle UCM 11g. When i am checking in a document, i am getting error as "Unable to execute service CHECKIN_NEW_SUB and function validateCheckinData."
In stacktrace found this is caused by:
"Unable to find query or idc data source with 'DdeletedRows'. "
How to resolve this?
Thanks in advancePlease refer to this thread ...may be u get ur answer out of it...........................
Error while checking in and storing: C:\ ..... (Message no. 26253)
regards,
Tushar Dave -
Hi Everyone,
Whenever I install some new software in my new laptop I get this error:-
Unable To Execute Files In The Temporary Directory. Setup Aborted. Error 5: Access Is Denied.
I have tried synchronizing the clocks but it doesn't remove the problem.
These softwares work on another laptop that i have, which also runs windows 7.
Can someone please tell me the solution as this is extremely urgent.
Thanks In Advance.
-MichaelIn short:
============
My permissions were all fine, so if anyone has trouble resolving the issue after sorting permissions then make sure you try fully disabling your anti-virus / anti-spyware / firewall applications, because that was the cause for me.
In detail:
============
Problem:
Failed to install this application
- http://www.ssware.com/cryptoobfuscator/download.htm
- on Windows 8.1 x64
- Get error message "Unable To Execute Files In The Temporary Directory. Setup Aborted. Error 5: Access Is Denied."
First Candidate Solution
The issue turns out to NOT be security rights on the Temp folder
ESET Smart Security HIPS Advanced Memory Scanner is the cause
http://kb.eset.com/esetkb/index?page=content&id=SOLN2908&actp=search&viewlocale=en_US&searchid=1392804914417
Instead, I went and turned off all the ESS protections one by one and it turned out to be HIPS that is causing this false positive.
In fact, it is the Advanced Memory Scanner option under HIPS that is causing the error, while the application in question is legit (using Inno Setup and presumably trying to write to the user temp folder, not sure whether just logs or to execute from there)
Furthermore, Smart Security logs have no entries under HIPS even though I ticked "Log all blocked operations" under the HIPS "Advanced setup" - it was quite a journey to find out the cause :)
Thank you. I have the same OS and installed ESET Smart Security as well. And it is resolved now.
I just want to add, that by "Temporarily disable protection" and "Temporarily disable firewall", it doesn't work. You have to disable HIPS, as KristjanL said. -
Unable to execute rules twice after applying Planning 9.3.1.1.11
Hi All,
Just wondering whether someone has come across this issue.
We have just applied Planning 9.3.1.1.11 on a Windows platform.
As a result, we are unable to execute the same rule twice from within the AAS console on any client machine and get the following error:
"You must be connected to database to execute a rule."
Once we get this error we cannot exeucte any other business tules and need to log back in to the AAS console to fix the problem.
If we open up the AAS console on the AAS server, we can rule the rules as many times as we like. The error only comes up when executing a same rule from a client machine.
In Planning web we can execute any business rules multiple times. However, if a user gets the above error in the AAS console, he/she is then unable to execute rules in Planning web unless he/she logs out and logs back in.
We are using Planning 9.3.1.1.11, AAS 9.3.1.3.07 and HBR 9.3.1.1.11 on the server.
However the AAS version on the client side is 9.3.1.1.9 and I think this may be what s causing the issue.
The HBR patch for 9.3.1.1.11 is a server patch and cannot be installed on client machines. I am therefore unable to upgrade the AAS console on client machines to 9.3.1.1.11.
Has anyone come across this?
Thanks for your help.
SebHi John,
I worked it out last night... The readme for 9.3.1.1.11 is not very clear and I dont think it mentions patching each client.
Below are the steps:
1 - Close down the AAS console
2 - Copy the newly deployed easclientplugin.jar, cmdlnlauncher.jar and identitymigration.jar from the AAS server and paste them under Hyperion\AnalyticAdministrationServices\console\lib on your client machine. Overwrite existing files if necessary.
3 - Copy the new MigrateIdentities.bat from the AAS server and paste it under Hyperion\AnalyticAdministrationServices\console\bin on your client machine. Overwrite existing files if necessary.
4 - Log on to the AAS console and go to Help - About and ensure that the HBR version is now 9.3.1.1.11
5 - From the AAS console try and execute the same HBR twice.
Thanks for your help.
Seb -
Unable to execute the substitution variable in calc scripts in essbase 11.1
Unable to execute the substitution variable in calc scripts in essbase 11.1.3
FIX(&CURRVERSION,COLA)
Unit=units*Listprice;
dataexport "file" "," "E:\NEW.TXT";
ENDFIX
Error: 1200471 Error parsing formula for FIX STATEMENT (line 1): expression expected before [)]
This is error it throws when executing the calculation script
I wonder whether its a problem with substitution variable i want to know wat went wrong inside the fix statement
I have created substitution variable use maxl
Installed the essbase in custom manner and standlone mode nt register with the shared services ,
Is this problem with the custom installation of essbase
Regards
shennaIf you remove the substitution variable and replace it with the actual value (whatever that is), does the code work? That will tell you if the issue is around the substitution variable or not.
John -- First you race Glenn, then you race me -- and you always win. :)
Regards,
Cameron Lackpour -
Unable to alter the process. Unable to execute action start and stop
Hi,
I have setup a UCM CMS server on Linux. In the UCM instaance I setup If I go to Admin Server, the Genral configuration page contains no entry. While the file Config.cfg present in the directory Oracle/UCM/Server/Config/ contains all the entries I provided during the setup.
Now when I am trying to start/stop the UCM instance, it is giving me error " Request Failed : Unable to alter the process. Unable to execute action 'stop' on server 'EBIZ_UCM'." While If I try to restart the server using IdcServer present at the location Oracle/UCM/Server/bin/, it is getting started.
While clicking on the Component Manager, its giving error like :
" Unable to retrieve component data. Components.hda exists, but contains no data. ".
Please suggest.I know this is an old thread, but I ran across this while having a similar problem. It turned out that I had started the admin server incorrectly (e.g. running /apps/oracle/ucm/server/admin/bin/IdcAdmin instead of /apps/oracle/ucm/server/admin/etc/idcadmin_start). Once I corrected that the problem went away.
-
Error - Unable to execute service and function
Hi all,
I created a sample component with service handlers but it is giving errors Unable to execute service GET_PURGE_LIST and function getPurgeList.
(System Error: The service method 'getPurgeList' is not defined.) Please let me know what changes to be made to fix this
Below are the files I used:
======================
ampfacpurgecontents_resource.htm
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8">
<title>
ServiceHandlerSample htmlIncludeOrString
</title>
</head>
<body>
<@dynamichtml custom_finish_layout_init@>
<$include super.custom_finish_layout_init$>
if (navBuilder)
if (isLoggedIn)
navBuilder.addChildNodeTo('MY_CONTENT', 'item', 'id==GET_PURGE_LIST',
'label=='+'Show Purge List',
'url==<$HttpCgiPath$>?IdcService=GET_PURGE_LIST');
<@end@>
</body></html>
===============================================
Services
======
servicehandlersample_service.htm
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8">
<title>
ServiceHandlerSample service
</title>
</head>
<body>
<@table ServiceHandlerSample_Services@>
<table border=1><caption><strong>Scripts For Custom Services</strong></caption>
<tr>
<td>Name</td><td>Attributes</td><td>Actions</td>
</tr>
<tr>
<td>GET_PURGE_LIST</td>
<td>DocService
0
PUTRGE_LIST_PAGE
null
null<br>
null</td>
<td>3:getPurgeList:GET_LIST:0:null</td>
</tr>
</table>
<@end@>
</body></html>
======================
service handler
============
servicehandlers_handlers.htm
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8">
<title>
ServiceHandlerSample htmlIncludeOrString
</title>
</head>
<body>
<@table SampleServiceHandlers@>
<table border=1><caption><strong>ServiceHandlers</strong></caption>
<tr>
<td>serviceName</td><td>handler</td><td>searchOrder</td>
</tr>
<tr>
<td>DocService</td>
<td>com.ameriprise.ServiceHandlerSample.getPurgeList</td>
<td>100</td>
</tr>
</table>
<@end@>
</body></html>
======================================================
ServiceHandlerSample.hda
<?hda version="10.1.3.3.3 (080807)" jcharset=UTF8 encoding=utf-8?>
@Properties LocalData
version=2013_09_25(build 1)
blFieldTypes=
ComponentName=ServiceHandlerSample
hasPreferenceData=false
blDateFormat=M/d/yy {h:mm[:ss] {aa}[zzz]}!mAM,PM!tAsia/Calcutta
@end
@ResultSet ResourceDefinition
4
type
filename
tables
loadOrder
resource
resources/servicehandlersample_resource.htm
null
1
resource
resources/servicehandlers_handlers.htm
SampleServiceHandlers
1
service
resources/servicehandlersample_service.htm
ServiceHandlerSample_Services
1
template
templates/servicehandlersample_template.hda
null
1
@end
@ResultSet Filters
4
type
location
parameter
loadOrder
@end
@ResultSet MergeRules
4
fromTable
toTable
column
loadOrder
ServiceHandlerSample_Templates
IntradocTemplates
name
10
SampleServiceHandlers
ServiceHandlers
null
1
@end
@ResultSet ClassAliases
3
classname
location
loadOrder
@end
========================
Java Class
package com.ameriprise.ServiceHandlerSample;
import java.util.*;
import java.io.*;
import java.net.*;
import intradoc.common.*;
import intradoc.data.*;
import intradoc.shared.*;
import intradoc.server.*;
public class GetPurgedList extends ServiceHandler {
public void getPurgeList() throws ServiceException, DataException
DataResultSet fullStockData = new DataResultSet(new String[] {"Sample Content",
"11111", "123", "Sept-25-13" });
String resultSetName = m_currentAction.getParamAt(0);
m_binder.addResultSet(resultSetName, fullStockData);
============================================================
Template
servicehandlersample_template.hda
<?hda version="10.1.3.3.3 (080807)" jcharset=UTF8 encoding=utf-8?>
@Properties LocalData
blFieldTypes=
blDateFormat=M/d/yy {h:mm[:ss] {aa}[zzz]}!mAM,PM!tAsia/Calcutta
@end
@ResultSet ServiceHandlerSample_Templates
5
name
class
formtype
filename
description
PUTRGE_LIST_PAGE
Document
null
purge_list_page.htm
null
@endHi Ashok,
In your servicehandlersample_service.htm the Service Class should be your package name and not DocService. Here is how it should be:
<@table ServiceHandlerSample_Services@>
<table border=1><caption><strong>Scripts For Custom Services</strong></caption>
<tr>
<td>Name</td><td>Attributes</td><td>Actions</td>
</tr>
<tr>
<td>GET_PURGE_LIST</td>
<td>com.ameriprise.ServiceHandlerSample
0
PUTRGE_LIST_PAGE
null
null<br>
null</td>
<td>3:getPurgeList:GET_LIST:0:null</td>
</tr>
</table>
<@end@>
HTH
- Anand
Maybe you are looking for
-
Hi, I am working with embedded oc4j and I am using form based authentication.The application also has a connection to Oracle database.The Jdev version I am using is Build JDEVADF_MAIN.M1_GENERIC_080131.1115.4839.The application gets deployed on embed
-
Why can't I redeem my gift card... only took money from my credit card
I redeemed my itunes gift card, shows the amount in my account, but still took money from my credit card account.
-
Web page posted 2 weeks but is not showing up in Google or other search eng
Would there be a reason that a very basic web page created in iWeb would not meet the technical criteria to be included in Googles search page. It seems like Google have a problem digesting the page. Does anyone have any experience with that issue? C
-
Oracle 10g installation error in AIX 6.1 Platform
Friends , While installing Oracle 10g (10.2.0.1.0) on AIX 6.1 platform ,I get the following errors : Checking operating system requirements ... Expected result: One of 5200.004,5300.002 Actual Result: 6100.01 Check complete. The overall result of thi
-
My snowball iMac will not start. We did a security upgrade and when we restarted it was really slow so we did the disk utilities stuff and it said we had some problems. We then went to the instal disk to do more utility stuff and it would boot but th