VS Report on AX2012 cant' see the query!

I try to connect to a Query in AX2012 Cus-layer but can't se it under the reports dataset,The Query is vissible under VS Applications/Query !! I have Stoped and started AOS,Reporting services CIL-compiled nothing helps!
Do anybody have a clue!?

Similar Messages

Cant see the native groups on the forms and reports

We are migrating 9.3.3 to 11.1.2.1. We recently found the issue after the migration. Even after migrating the users, groups and provisioning using LCM; we cant see the groups in the forms and reports.
We did the migration for test environment, but didnt encounter this issue.
For eg, when I click on 'assign access' for a planning form I dont see the group assigned to that form. I can see that group in the shared services with all the provisioning. I can find the group and assign it manually for that form. But it doesn't shows up after the migration.
I opened the SR with oracle who suggested to bring over the schema and upgrade/register the applications again, as there might not be any groups present when I register the application before.
We brought over the schema, migrate and register the applications, but the problem still persists.
Has any one encountered issue like this, I would, I would really appreciate any suggestions.
thanks

Thanks for your reply John. I ran the UpdateUsers.cmd utility, but it didnt do anything. I brought over the schema again, updated and registered the application. Everything looks good so far, I can see the groups on dimension access and on the webforms.
When I run create or refresh security it deletes all the records in HSP_ACCESS_CONTROL. The view link disappears from the planning dimensions and i cant see the groups assigned on the webforms as well.
Any idea would be highly appreciated.
thanks

In ST03 , how can i see the Query name, user id,how many times executed the

HI Experts,
In ST03 , how can i see the Query name, user id,how many times executed the query.
these details how do i get from the above transaction.
EX:-if there is one report name X,I want to know how many users had executed X report today,weekly,monthly.
ex:-query userid total number of execution
sales order 0000555 5 times
custmer 05855 2 times
fast reply will be appreciated,

Hi,
Look here:
http://help.sap.com/saphelp_nw04/helpdata/en/3b/54df4204892a78e10000000a155106/frameset.htm
Also check these:
http://help.sap.com/saphelp_nw2004s/helpdata/en/2d/b8be3befaefc75e10000000a114084/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/25/ece73a39e74d27e10000000a114084/frameset.htm
Hope this helps..
Bye
Dinesh

In ST03 , how can i see the Query name, user id,how many times .

HI Experts,
In ST03 , how can i see the Query name, user id,how many times executed the query.
these details how do i get from the above transaction.
Points will be awarded.
BR
sivs

Hi Siva,
Reporting statistics data is only written to the database table if BW statistics have been manually activated for the corresponding InfoProvider first. If this has not been done, it is therefore not possible to display any reporting statistics in transaction ST03.
Therefore activate the reporting statistics for all relevant InfoProviders. To do this, set the OLAP flag in the BW Administrator Workbench (transaction RSA1) in the area Tools ® BW Statistics for InfoProvider.
Check here...........
http://help.sap.com/saphelp_nw04/helpdata/en/ca/86df4254d81e1fe10000000a155106/content.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c8c4d794-0501-0010-a693-918a17e663cc
Hope this will help you shiva.........
Regrads,
Vijay

Cancelling a dashboard report to execute still executes the query behind

All,
We have some reports thats takes time to execute like 3-4 minutes. My problem is if I cancel any report to execute, it still executes the query. I can see the query thru sessions under nqsserver.exe as ACTIVE.
Because of this user are thinking that they cancel the reports and move on to new one but oracle is still spending time to execute that query.
Thanks

Hello.
I have exactely the same need, can you please let us know how you solved your problem?
Thanks
Best Regards.

Cant see the list of Plugins Installed

I upgraded Mozilla Firefox from 3.6 to 15. I cant see the list of Plugins Installed, I want to uninstall some plugins but cant see any plugins there.
Screenshot
http://img23.imageshack.us/img23/2836/pluginsf.jpg

Maybe this will help, follow all steps exactly - https://support.mozilla.org/en-US/kb/troubleshoot-issues-with-plugins-fix-problems#w_re-initializing-the-plugins-database
Check your plugins and update them as required - https://www.mozilla.org/en-US/plugincheck/
Remove duplicate plugins (in your case, 2 versions of Shockwave Flash, i.e. Adobe Flash). See list of you plugins reported with your question; click More system details to right of your original question -
*https://support.mozilla.org/en-US/kb/troubleshoot-issues-with-plugins-fix-problems#w_manually-uninstalling-a-plugin
*http://kb.mozillazine.org/Issues_related_to_plugins

Extract a report from SAP to see the POs' recommended ship date

Hi there,
Can I extract a report from SAP, to see the recommended ship date of my POs, based on the MRP? As I need it to do the pull in and push out.
Edited by: Cindyye on Jul 20, 2011 8:22 AM

Refer ME80FN report wherein you can list out PO delivery schedule by clicking on change view icon after executing the report.
In Change View options select Del. sched this will list out POs with detailed delivery schedule. You can export the same to excel also.
Njoy SAP...

Hi, I have a late 2011 MacBook Pro but cant get the mirroring function to work with Apple TV. I've got the most recent Software 10.7.5 but cant see the mirroring icon or turn this on. I'm able to mirror from my Ipad but not my Mac, any thoughts?

Hi, I have a late 2011 MacBook Pro but cant get the mirroring function to work with Apple TV. I've got the most recent Software 10.7.5 but cant see the mirroring icon or turn this on. I'm able to mirror from my Ipad but not my Mac, any thoughts?

Welcome to the Apple Support Communities
AirPlay Mirroring is supported on your Mac, but it needs OS X Mountain Lion (10.8). See > http://support.apple.com/kb/HT5404
You have two possibilities:
1. Make a backup, open App Store and purchase Mountain Lion to upgrade to this OS X. Then, you will find the AirPlay Mirroring icon at the top right of the display, on the menu bar, or on System Preferences > Displays.
2. Keep OS X Lion and use AirParrot > http://www.airparrot.com
Both options work properly, but I recommend AirPlay Mirroring as it doesn't need a third-party program

HT204291 Im trying to use my apple TV to see a movie from my iphone. Since i select the airplay icon on my phone, i can only hear the voice of the movie on my screen but i cant see the movie, can anybody help me pls? Tks

Im trying to use my apple TV to see a movie from my iphone. Since i select the airplay icon on my phone, i can only hear the voice of the movie on my screen but i cant see the movie, can anybody help me pls? Tks

Is this a movie from iTunes? If so is it a rental or one you've purchased?

I cant see the airplay icon on mi iphone 3gs

i cant see the icon of airplay on my iphone 3gs i have a iphones 3gs wiht ios 5.1.1 i will like to use the airplay betewm mi iphone 3gs and my itunes on my pc , please help me with this NOTE I dont have a Mac i have PC with W7 but i read that is posible plesase help me , and itunes dont show me the icon , when i had a 3g he show me the icone but i cant see it

This is from the "Troubleshooting AirPlay" article:
Resolution
If the AirPlay icon doesn't appear
Check for the AirPlay icon ( ) in the recently used apps section on your iOS device, or in iTunes on your computer (as in these articles about how to use AirPlay and how to use AirPlay Mirroring). The icon will only appear if your device or computer is logged onto a Wi-Fi network which has an AirPlay-enabled recipient, such as Apple TV (2nd generation or 3rd generation).
If you are still unable to see the AirPlay icon, try one of the following steps:
Verify that your AirPlay-enabled devices have the most up-to-date software or firmware.
Verify that your iOS device has Wi-Fi turned on. Enable Wi-Fi on your iOS device by going to Settings > Wi-Fi.
Verify that all your AirPlay-enabled devices are logged on to the same home Wi-Fi network (check the home network names on your devices to confirm).
If trying to AirPlay, or AirPlay mirror, to your Apple TV (2nd or 3rd generation), ensure that AirPlay is enabled on your Apple TV as well. You can enable or disable AirPlay on Apple TV in the AirPlay menu: Settings > AirPlay
Check Internet or network connectivity on all affected devices.
Temporarily disable firewalls (both network and local) and security software. Security software and firewalls may block ports that AirPlay uses to stream content. You can often resolve issues with security software by updating, correctly configuring, or uninstalling security software.
If attempting to use AirPlay from a third-party app or a website from your Safari app on your iOS device, confirm that the app or website is AirPlay compatible (refer to the developers of the app or website for additional information).
The entire article is at http://support.apple.com/kb/TS4215

I cant seem to scan from my hp photosmart 7520 printer to my iMac but can scan using the iMac? photosmart cant see the iMac.

I cant seem to scan from my hp photosmart 7520 printer to my iMac but can scan using the iMac? Photosmart cant see the iMac. Mac is wired to the router printer over wi fi.

Hi Shlomi
It worked!!! Thanks so much, I've been messing about with this for hours.
As you are so good I do have another problem. I have another 2 pc's on the network that show on the iMac but iMac cannot conect to. One is XP and the other is Vista both with Norton fire wall installed.
Any thoughts you have would be much appriciated
Rob

I dopped my iphone on the floor today and nothing cracked but when i tried to turn it on, the screen had a bunch of barcode like stripes. even though i cant see the screen, i was still able to type in my password and answer a phone call. how can i fix it?

I dopped my iphone on the floor today and nothing cracked but when i tried to turn it on, the screen had a bunch of barcode like stripes. even though i cant see the screen, i was still able to type in my password and answer a phone call. how can i fix it?

YOU can't fix it. But you can bring it in to Apple for an out of warranty replacement for $199.

I did hold the ALT cmand r key but i cant see the globe i dont know how i can fix my macbook pro late 2008 can any 1 plzzzz help me im very upsate but i live PAKISTAN in here i cant find os x lion disk i dont know what to do if i get the os x lion usb

i did hold the ALT cmand r key but i cant see the globe i dont know how i can fix my macbook pro late 2008 can any 1 plzzzz help me im very upsate but i live PAKISTAN in here i cant find os x lion disk i dont know what to do if i get the os x lion usb

That does not work on model year older then 2010 and really doesn't work on any older then late 2011 models.
You will need a set of original system dvd disc thjat are always sypplied with every mac sold before Lion came out. Systems older then late release early 2011 models.
If you don't have them you kcan order a replacement set from apple by calling them. Have the serial number of you mac handy.

Can users see the query plan of a SQL query in Oracle?

Hi,
I wonder for a given sql query, after the system optimization, can I see the query plan in oracle? If yes, how to do that? thank you.
Xing

You can use explain plan in SQLPlus
SQL> explain plan for select * from user_tables;
Explained.
Elapsed: 00:00:01.63
SQL> select * from table(dbms_xplan.display());
PLAN_TABLE_OUTPUT
Plan hash value: 806004009
| Id | Operation                       | Name     | Rows | Bytes | Cost (%CPU)| Time     |
|   0 | SELECT STATEMENT                |          | 2014 | 1123K|   507   (6)| 00:00:07 |
|* 1 | HASH JOIN RIGHT OUTER          |          | 2014 | 1123K|   507   (6)| 00:00:07 |
|   2 |   TABLE ACCESS FULL             | SEG$     | 4809 |   206K|    34   (3)| 00:00:01 |
|* 3 |   HASH JOIN RIGHT OUTER         |          | 1697 |   873K|   472   (6)| 00:00:06 |
|   4 |    TABLE ACCESS FULL            | USER$    |    74 | 1036 |     3   (0)| 00:00:01 |
|* 5 |    HASH JOIN OUTER              |          | 1697 |   850K|   468   (6)| 00:00:06 |
|   6 |     NESTED LOOPS OUTER          |          | 1697 |   836K|   315   (6)| 00:00:04 |
|* 7 |      HASH JOIN                  |          | 1697 |   787K|   226   (8)| 00:00:03 |
|   8 |       TABLE ACCESS FULL         | TS$      |    13 |   221 |     5   (0)| 00:00:01 |
|   9 |       NESTED LOOPS              |          | 1697 |   759K|   221   (8)| 00:00:03 |
| 10 |        MERGE JOIN CARTESIAN     |          | 1697 |   599K|   162 (10)| 00:00:02 |
|* 11 |         HASH JOIN               |          |     1 |   326 |     1 (100)| 00:00:01 |
|* 12 |          FIXED TABLE FULL       | X$KSPPI |     1 |    55 |     0   (0)| 00:00:01 |
| 13 |          FIXED TABLE FULL       | X$KSPPCV |   100 | 27100 |     0   (0)| 00:00:01 |
| 14 |         BUFFER SORT             |          | 1697 | 61092 |   162 (10)| 00:00:02 |
|* 15 |          TABLE ACCESS FULL      | OBJ$     | 1697 | 61092 |   161 (10)| 00:00:02 |
|* 16 |        TABLE ACCESS CLUSTER     | TAB$     |     1 |    96 |     1   (0)| 00:00:01 |
|* 17 |         INDEX UNIQUE SCAN       | I_OBJ#   |     1 |       |     0   (0)| 00:00:01 |
| 18 |      TABLE ACCESS BY INDEX ROWID| OBJ$     |     1 |    30 |     1   (0)| 00:00:01 |
|* 19 |       INDEX UNIQUE SCAN         | I_OBJ1   |     1 |       |     0   (0)| 00:00:01 |
| 20 |     TABLE ACCESS FULL           | OBJ$     | 52728 |   411K|   151   (4)| 00:00:02 |
Predicate Information (identified by operation id):
   1 - access("T"."FILE#"="S"."FILE#"(+) AND "T"."BLOCK#"="S"."BLOCK#"(+) AND
              "T"."TS#"="S"."TS#"(+))
   3 - access("CX"."OWNER#"="CU"."USER#"(+))
   5 - access("T"."DATAOBJ#"="CX"."OBJ#"(+))
   7 - access("T"."TS#"="TS"."TS#")
11 - access("KSPPI"."INDX"="KSPPCV"."INDX")
12 - filter("KSPPI"."KSPPINM"='_dml_monitoring_enabled')
15 - filter("O"."OWNER#"=USERENV('SCHEMAID') AND BITAND("O"."FLAGS",128)=0)
16 - filter(BITAND("T"."PROPERTY",1)=0)
17 - access("O"."OBJ#"="T"."OBJ#")
19 - access("T"."BOBJ#"="CO"."OBJ#"(+))
42 rows selected.
Elapsed: 00:00:03.61
SQL> If your plan table does not exist, execute the script $ORACLE_HOME/RDBMS/ADMIN/utlxplan.sql to create the table.

My itunes screen is black and i cant see the writing how do i change the colour

My itunes screen is black when im trying to find music - how do i change the colour as i cant see the writing

With that one, perhaps try Drgoo's suggestion from the following post:
Re: Itunes Store - ALL Text Black/Cant See Anything

VS Report on AX2012 cant' see the query!

Similar Messages

Maybe you are looking for