VS2010 with Oracle 11g Release 2 giving Package did not load correctly

Hey ,
I had a Oracle 11g Release 1 11.1.0 installed on my machine. I had a client and over that a installation for Visual Studio tools for VS2008 installed. So in the directory of 11.1.0 I had two folders of Client 1 and Client2 . I was able to use the tools in VS very well and everything was perfect.
Recently my company has decided to shift to VS2010. Now when I installed Oracle Release 2 11.2 client, it worked perfect ( tested using toad ). But when I install the tools ODTwithODAC112012, it has an issue that when I fire up VS2010 and try to add connection, it gives an error popup saying : " The 'Oracle Developer Tools for Visual Studio .NET' package did not load correctly. It asks me load VS in log mode and see the Activity log. The Activity Log gives the following entry :
<errorinfo>Could not load file or assembly 'Oracle.VsDevTools, Version=4.112.1.2, Culture=neutral, PublicKeyToken=89b483f429c47342' or one of its dependencies. The system cannot find the file specified.</errorinfo>
</entry>
The assembly Oracle.VsDevTools is loaded in GAC which I've checked . So, questions in my mind :
a. Can we have both 11.1 and 11.2 in the same machine, is that the issue?
b. Any solution to solve this issue. Both the setup's go smoothly without any errors. Also I am able to connect to oracle very easily using toad.
Would appreciate any help.
Thanks,
Sumit

You'll probably have better luck posting this over in the ODT forum, but be sure to check the Package Load Failure sticky at the top first..
Oracle Developer Tools for Visual Studio
Having multple versions of ODP installed at once generally isnt a problem but I haven't tried a situation where I've tried to have multiple ODT's at once.
Greg

Similar Messages

Is anyone having problems with Firefox today? My websites are not loading correctly

Firefox just isn't working right today. My home page (yahoo.com) will not load correctly, nor does a university site for a course that I am teaching online. I can do both of these if I use Internet Explorer.

Hi ritawickham,
We've actually put together a troubleshooting section for [https://support.mozilla.org/en-US/kb/web-pages-dont-load website loading issues]. Have you had a chance to browse the documents there? If not, you should take a look. There is a lot of useful information.
Hopefully this helps!

HT1491 Bought and downloanded an album, but the last three songs did not load correctly and when i play them on my ipod they turn off before the end of the song. Itunes says all songs downloaded. How can this be fixed?

Bought and downloaded an album from Itunes. Now when I play it on my Ipod the last three songs are cut short. Itunes says all songs are downloaded, no incomplete downloads. How can this be fixed?

Hi..
Try re downloading ...
Downloading past purchases from the App Store, iBookstore, and iTunes Store

Oracle 11g Release 2 - installation how to

Hi,
i have summarized my current findings with Oracle 11g Release 2 in my new blog:
http://ronnyegner.wordpress.com
Ronny Egner
Edited by: Ronny Egner on Sep 7, 2009 3:00 PM
Edited by: Ronny Egner on Sep 11, 2009 2:35 PM

John Hurley wrote:
I probably should not be surprised but to recap some of what your presentation noted ... it sounds like 11.2 was pushed out quickly and the linux version is missing fixes that oracle knows should have been included in the base release?From my point of view this is fact. 11g Release 2 was released primary due to marketing reasons. The release of the final and public version took place only two weeks after beta 2 was released.
Beta 2 was quite stable; altough the real productive testing starts now where many users test this release with lots of data. Because of this i stated to wait at least until the first patchset
(which will raise the version to 11.2.0.2.0) before going productive. Until now it is for testing and preparing for migration. But thats my opinion. If anybody uses 11g Release 2 in production
i would like to share experiences.
Some of the postings that I saw on the web specifically noted 11.2.0.2 on some of the software versions ( maybe these were from beta's ? ) so it sounds like there is already perhaps a bunch of maintenance that should be on I have not seen 11.2.0.2.0 yet. My personal tip is the first patchset will be release beginning next year...
Ronny Egner
Edited by: Ronny Egner on Sep 8, 2009 7:41 AM

I brought hoyle slots it did not down correctly i want to reload without being billed again

how can i reload an app that did not load correctly without being charge again

It should be on your "Purchases" pane in the Mac App store (if that is where you bought it from). There should be a [ Download ] button there to download it again.

Installation of Oracle 11g Release 2 on Windows Server 2008 R2

Hi:
When I tried to install 64-bit Oracle 11g Release 2 on a system running 64-bit Windows Server 2008 R2.
One of the system pre-requisites failed with the following error message:
Checking operating system requirements ...
Expected result: One of 5.0,5.1,5.2,6.0
Actual Result: 6.1
Check complete. The overall result of this check is: Failed <<<<
Problem: Oracle Database 11g is not certified on the current operating system.
Recommendation: Make sure you are installing the software on the correct platform.
I presume 6.0 is Windows 2008 Server and 6.1 should be Release 2.
Does this mean that this version is not compatible with Server 2008 Release 2?
venki
Edited by: thevenkat on Jan 20, 2010 9:37 PM

Hans Forbrich wrote:
[email protected] wrote:
Does anyone know when we can expect 11g R2 for Windows?No one outside of Oracle officially knows (and they are under NDA)
No one inside Oracle is permitted to say, or pre-announce release dates for legal reasons.
Which is why I gave you the link - so you could monitor for yourself.OK, thanks...
I was just hoping there was an official release date and I just couldn't find it.
Is there any information about features in 11gR2 for Windows available yet?
Or can you maybe tell me if it will be possible to mount the new "database filesystem" like we can do on linux?
I remember oracle did something similar with Oracle ifs (Internet File System) back in Oracle 9i. (or was it 8i?)
Regards
Thomas

Unable to install Oracle 11g Release 2 in windows 7 64 bit OS

Hi,
Am trying to install the oracle 11g Release 2 database on my Laptop,
I have downloaded the two zip files from Oracle Site
http://www.oracle.com/technetwork/database/enterprise-edition/downloads/index.html
After downloading I have unzipped started process, but after some process, am getting an error mentioning that, am missing a file in the below location
C:\$Oracle_BASE$\product\11.2.0\dbhome_1\owb\external\oc4j_applications\applications
but my unzip is successful for both the files, Please let me know why am getting this error when I have downloaded the files from Oracle site, Please let me know if I need to have
any additional s/w installed on my machine before running the Oracle database installation
Thanks

973946 wrote:
Thanks Srini,
After checking the link, I was able to install it but there were some error messages.
I have another problem log in the SQL PLUS. When I open the SQL PLUS window, it asked for Username and after I typed "sys" or "system" and hit Enter; it was prompted for password, however, it did not let me type in any word; and after I hit Enter again, the error message " ORA-12560: TNS:protocol adapter error" appeared
Any hints would be apprecieted, thanks.
SamIt wasn't preventing you from typing a password, it just wasn't echoing your keystrokes back to the screen. This is a security security feature common to most software, not just oracle. Either when asking for a password, either echo back a 'masking' character like '*' or don't echo anything. It's so common, I'm surprised you seem to have never seen it before.
So after entering your password ... the 12560 probably comes from
1- the fact you didn't have the environment variable ORACLE_SID set, so sqlplus didn' know the name of the instance/process you wanted to connect to, or
2 - the windows service for the database was not started.
Those two possibilities account for 99.99999 pct of ora-12560 on Windows installations.
Edited by: EdStevens on Nov 29, 2012 6:41 PM

Writing request XQUERY with oracle 11G

Hi,
What is exactly the best way to make an XMLTYPE object (column with type XMLType) request with Oracle 11 g ? (Oracle 11g Release 11.2.0.3.0)
In different books, we see a lot of different requests.
Simple example :
create table contact_file_tbl(filename varchar2(255), xml xmltype);
insert into contact_file_tbl (filename, xml)
values ('john_smith.xml', xmltype(bfilename('XML_DIR', 'john_smith.xml'),nls_charset_id('AL32UTF8')));
Ok for now
But impossible to make a good query :
select XMLQuery('declare namespace book="http://xmlbook.com/sample/contact.xsd"; (:
for $c in /book:contact
return $c/book:first_name' PASSING a.xml RETURNING CONTENT)
from contact_file_tbl a;
returns nothing.
why this request works ?
SELECT filename, XMLQuery('toto'
         PASSING xml RETURNING CONTENT) dataResult
FROM contact_file_tbl;
Could you send me a request with this example.
Here the XML document :
<?xml version="1.0" encoding="UTF-8"?>
<contact xmlns="http://xmlbook.com/sample/contact.xsd" id="1">
   <category>customer</category>
   <first_name Chinese="约翰">John</first_name>
   <last_name>Smith</last_name>
   <email>[email protected]</email>
   <phone>(512)781-9230</phone>
   <cellphone>(512)781-9230</cellphone>
   <address>
       <street1>1234 sunflower road</street1>
       <city>austin</city>
       <state>texas</state>
       <zipcode>78701</zipcode>
       <country>USA</country>
   </address>
   <references>
     <reference relationship="account manager, tech sales">
       <first_name>robert</first_name>
       <last_name>tian</last_name>
         <email>[email protected]</email>
     </reference>
     <reference relationship="account manager, app sales">
       <first_name>Richard</first_name>
       <last_name>Liu</last_name>
       <email>[email protected]</email>
     </reference>
   </references>
</contact>
Thank you very much

This works fine for me :
SQL> select XMLQuery(
2 'declare namespace book="http://xmlbook.com/sample/contact.xsd"; (::)
3 for $c in /book:contact
4 return $c/book:first_name'
5 PASSING a.xml
6 RETURNING CONTENT
7 )
8 from contact_file_tbl a;
XMLQUERY('DECLARENAMESPACEBOOK
<first_name xmlns="http://xmlbook.com/sample/contact.xsd" Chinese="??">John</fir
SQL>
SQL> select XMLCast(
2 XMLQuery(
3 'declare namespace book="http://xmlbook.com/sample/contact.xsd"; (::)
4 for $c in /book:contact
5 return $c/book:first_name'
6 PASSING a.xml
7 RETURNING CONTENT
8 )
9 as varchar2(30)
10 ) as first_name
11 from contact_file_tbl a;
FIRST_NAME
John
What's your client tool/version?

Error Intall RWD Uperform 4.3 on Windows 2008 with Oracle 11G

Hi,
I need install RWD Uperform 4.3 on Windows 2008 with Oracle 11G.
When tried install Uperform 4.3 occurs the next error:
Product: RWD uPerform Server -- This Release requires Oracle 11.2 R2 ODP Client to be Installed.
If you are not using Oracle, please use the regular 4.30.0 release.
If you are using Oracle, please install ODP.NET and then re-run the Setup. Setup will be aborted now.
I installed the ODP.NET whit the version 11.2.0.2.
But the errors still occur.
Thanks.
Marco Kolombesky

In the end I solved my problem.
But I installed RWD uperform 4.4 (not 4.3).
But I think that the problem was that when I installed uperform 4.3 I didn't run this command at DB level on my SQL Server datadabe:
ALTER DATABASE AdventureWorks2008R2
SET READ_COMMITTED_SNAPSHOT ON;
GO
Regards
Matteo Stocco

Problem in opening editor in Oracle 11g release 2

Hii all
I have Install Oracle 11g release 2 on my 32 bit windows OS.
But I am having Little problem while opening editor
1) when ever i am typing ed in sql prompt I am having error
   Cannot create save file "afiedt.buf"
   How ever i have tried with the define editor command
   ie define_editor="Notepad"; the command is executing successfully but still i am having same error while typing ed
2)My second problem is i am not able to select anything for copy and paste even
   right mouse click button is also not working for paste
Please Suggest any solution soon...........

Thank Mr.Sharma
sir i have one more doubt
suppose my select statement is resulting some 4000 rows but i am only able to see the last
2500 to 4000 rows by scrolling up and down after the select has been made. I am facing this problem in 11g r2 only.
In 10g there was no such problem
so i want to know how to increase the size of sqlplus prompt so that i could see the entire
selected rows by scrolling up and down
Please reply sir..................
Thank You

Oracle 11g Release 2 "error in moving file"

Hi there, right now I'm trying to install Oracle 11g release 2 64-bit on Windows 7 64 bit. about half-way through the installation i get an error message:
"error in moving file C:\app\dlee14\product\11.2.0\dbhome_1\bin\oralbac11.dll to C:\app\dlee14\product\11.2.0\dbhome_1\bin\oralbac11.dll.dbl"
what's going on and how do i fix it?

1010200 wrote:
Dear Team,
we are getting error while installing RAT( workload features)
Neither D:\oracle\app\product\11gRel2/bin/orarat11.dll.dbl nor D:\oracle\app\product\11gRel2/bin/orarat11.dll exist.
Therefore, the ORACLE_HOME is in an invalid state with respect to the option '
Please suggest :I suggest that instead of hijacking a two year old thread that is only tangentially related to your problem, that you start your own thread with as many of your specific details as you can muster.

Installing oracle application express from the database with oracle 11g

Hi,
I installed oracle 11g release 1 and trying to install oracle APEX from the database with Embedded PL/SQL gateway. The installation guide require grant connect privilege to any host for the APEX_030200 database user, but this schema does not exist in the database...
How to continue the installation of APEX ?

Thanks Hari,
But I need to enable network services in my database (oracle 11g).
Do I have to replace in the PL/SQL script below apex_030200 by flows_030000 ?
DECLARE
ACL_PATH VARCHAR2(4000);
ACL_ID RAW(16);
BEGIN
-- Look for the ACL currently assigned to '*' and give APEX_030200
-- the "connect" privilege if APEX_030200 does not have the privilege yet.
SELECT ACL INTO ACL_PATH FROM DBA_NETWORK_ACLS
WHERE HOST = '*' AND LOWER_PORT IS NULL AND UPPER_PORT IS NULL;
-- Before checking the privilege, ensure that the ACL is valid
-- (for example, does not contain stale references to dropped users).
-- If it does, the following exception will be raised:
-- ORA-44416: Invalid ACL: Unresolved principal 'APEX_030200'
-- ORA-06512: at "XDB.DBMS_XDBZ", line ...
SELECT SYS_OP_R2O(extractValue(P.RES, '/Resource/XMLRef')) INTO ACL_ID
FROM XDB.XDB$ACL A, PATH_VIEW P
WHERE extractValue(P.RES, '/Resource/XMLRef') = REF(A) AND
EQUALS_PATH(P.RES, ACL_PATH) = 1;
DBMS_XDBZ.ValidateACL(ACL_ID);
IF DBMS_NETWORK_ACL_ADMIN.CHECK_PRIVILEGE(ACL_PATH, 'APEX_030200', 'connect') IS NULL THEN
DBMS_NETWORK_ACL_ADMIN.ADD_PRIVILEGE(ACL_PATH,'APEX_030200', TRUE, 'connect');
END IF;
EXCEPTION
-- When no ACL has been assigned to '*'.
WHEN NO_DATA_FOUND THEN
DBMS_NETWORK_ACL_ADMIN.CREATE_ACL('power_users.xml','ACL that lets power users to connect to everywhere',
'APEX_030200', TRUE, 'connect');
DBMS_NETWORK_ACL_ADMIN.ASSIGN_ACL('power_users.xml','*');
END;
COMMIT;
Regards

How to setup local loopback for "Oracle 11g Release 2" installtion

Hi all,
I was trying to install the Oracle 11g Release 2 on Red hat 6 using Local Loop back configuration, but not able to install..
The contents of are:-
/etc/resolv.conf
# Generated by NetworkManager
nameserver 59.179.243.70
nameserver 203.94.243.70
and of /etc/hosts are:
127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4
::1 localhost localhost.localdomain localhost6 localhost6.localdomain6
and
System eth0 is having setting given below:-
IPV4 is set to " Automatic(DHCP)".
IPV6 is set to "ignore".
If i select system etho0 then host-name gets changed it becomes "dhcppc0".
i checked it using command host-name. and if i try to install with this configuration then during installation gives error of networking as host-name has been changed to "dhcppc0".
Please tell me what to do for local loopback configuration
Am i doing some thing wrong?
Thanks

i am using "oracle Release 11.2.0.1.0" but same problem was there with oracle 10g on redhat 5.
Please tell me how to setup local loopback configuration so that i can use internet as well as oracle on same machine. otherwise for internet use i have to change my system ipV4 to automatic(DHCP). if i change it to automatic(DHCP) then oracle stop its working please tell me solution for both case.
I can not assign Static IP to IPv4, i earlier post i got recommendation to connfigure Local Loopback , but i am able to setup it.
what ever the setting i have done are given below:--
vi /etc/hosts
127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4
::1 localhost localhost.localdomain localhost6 localhost6.localdomain6
vi .etc/resolv.conf
# Generated by NetworkManager
nameserver 59.179.243.70
nameserver 203.94.243.70
#ping localhost
PING localhost.localdomain (127.0.0.1) 56(84) bytes of data.
64 bytes from localhost.localdomain (127.0.0.1): icmp_seq=1 ttl=64 time=0.048 ms
64 bytes from localhost.localdomain (127.0.0.1): icmp_seq=2 ttl=64 time=0.073 ms
64 bytes from localhost.localdomain (127.0.0.1): icmp_seq=3 ttl=64 time=0.037 ms
++++++++++++++++++++++++++++++++++++++++++++++++
error is------
[INS-06101]Ip address of localhost could not be determined
are you sure you want to continue?
Cause - The localhost is not mapped to a valid IP address in Hosts file (Eg. /etc/hosts in Unix).
Action - Assign a valid IP address for the localhost or set it to loopback IP address (127.0.0.1 in IPv4 or ::1 in IPv6).
Summary - dhcppc0: dhcppc0
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
log file lines are:--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Using paramFile: /database/install/oraparam.ini
Checking Temp space: must be greater than 80 MB. Actual 7471 MB Passed
Checking swap space: must be greater than 150 MB. Actual 3499 MB Passed
Checking monitor: must be configured to display at least 256 colors. Actual 16777216 Passed
The commandline for unzip:
/database/install/unzip -qqqo ../stage/Components/oracle.jdk/1.5.0.17.0/1/DataFiles/\*.jar -d /tmp/OraInstall2012-05-29_05-13-01PM
Using the umask value '022' available from oraparam.ini
Execvp of the child jre : the cmdline is /tmp/OraInstall2012-05-29_05-13-01PM/jdk/jre/bin/java, and the argv is
/tmp/OraInstall2012-05-29_05-13-01PM/jdk/jre/bin/java
-Doracle.installer.library_loc=/tmp/OraInstall2012-05-29_05-13-01PM/oui/lib/linux
-Doracle.installer.oui_loc=/tmp/OraInstall2012-05-29_05-13-01PM/oui
-Doracle.installer.bootstrap=TRUE
-Doracle.installer.startup_location=/database/install
-Doracle.installer.jre_loc=/tmp/OraInstall2012-05-29_05-13-01PM/jdk/jre
-Doracle.installer.nlsEnabled="TRUE"
-Doracle.installer.prereqConfigLoc=
-Doracle.installer.unixVersion=2.6.32-220.el6.i686
-mx150m
-cp
/tmp/OraInstall2012-05-29_05-13-01PM::/tmp/OraInstall2012-05-29_05-13-01PM/ext/jlib/OraPrereqChecks.jar:/tmp/OraInstall2012-05-29_05-13-01PM/ext/jlib/jsch.jar:/tmp/OraInstall2012-05-29_05-13-01PM/ext/jlib/instcommon.jar:/tmp/OraInstall2012-05-29_05-13-01PM/ext/jlib/instdb.jar:/tmp/OraInstall2012-05-29_05-13-01PM/ext/jlib/OraPrereq.jar:/tmp/OraInstall2012-05-29_05-13-01PM/ext/jlib/ssh.jar:/tmp/OraInstall2012-05-29_05-13-01PM/ext/jlib/prov_fixup.jar:/tmp/OraInstall2012-05-29_05-13-01PM/ext/jlib/emocmutl.jar:/tmp/OraInstall2012-05-29_05-13-01PM/ext/jlib/orai18n-utility.jar:/tmp/OraInstall2012-05-29_05-13-01PM/ext/jlib/orai18n-mapping.jar:/tmp/OraInstall2012-05-29_05-13-01PM/ext/jlib/installcommons_1.0.0b.jar:/tmp/OraInstall2012-05-29_05-13-01PM/ext/jlib/cvu.jar:/tmp/OraInstall2012-05-29_05-13-01PM/ext/jlib/remoteinterfaces.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/OraInstaller.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/oneclick.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/xmlparserv2.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/share.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/OraInstallerNet.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/emCfg.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/emocmutl.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/OraPrereq.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/jsch.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/ssh.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/remoteinterfaces.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/http_client.jar:../stage/Components/oracle.swd.opatch/11.2.0.1.0/1/DataFiles/jlib/opatch.jar:../stage/Components/oracle.swd.opatch/11.2.0.1.0/1/DataFiles/jlib/opatchactions.jar:../stage/Components/oracle.swd.opatch/11.2.0.1.0/1/DataFiles/jlib/opatchprereq.jar:../stage/Components/oracle.swd.opatch/11.2.0.1.0/1/DataFiles/jlib/opatchutil.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/OraCheckPoint.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/InstImages.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/InstHelp.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/InstHelp_de.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/InstHelp_es.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/InstHelp_fr.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/InstHelp_it.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/InstHelp_ja.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/InstHelp_ko.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/InstHelp_pt_BR.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/InstHelp_zh_CN.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/InstHelp_zh_TW.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/oracle_ice.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/help4.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/help4-nls.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/ewt3.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/ewt3-swingaccess.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/ewt3-nls.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/swingaccess.jar::/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/jewt4.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/jewt4-nls.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/orai18n-collation.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/orai18n-mapping.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/ojmisc.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/xml.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/srvm.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/srvmasm.jar
oracle.install.ivw.db.driver.DBInstaller
-scratchPath
/tmp/OraInstall2012-05-29_05-13-01PM
-sourceLoc
/database/install/../stage/products.xml
-sourceType
network
-timestamp
2012-05-29_05-13-01PM
INFO: Loading data from: jar:file:/tmp/OraInstall2012-05-29_05-13-01PM/ext/jlib/installcommons_1.0.0b.jar!/oracle/install/driver/oui/resource/ConfigCommandMappings.xml
INFO: Loading beanstore from jar:file:/tmp/OraInstall2012-05-29_05-13-01PM/ext/jlib/installcommons_1.0.0b.jar!/oracle/install/driver/oui/resource/ConfigCommandMappings.xml
INFO: Restoring class oracle.install.driver.oui.ConfigCmdMappings from jar:file:/tmp/OraInstall2012-05-29_05-13-01PM/ext/jlib/installcommons_1.0.0b.jar!/oracle/install/driver/oui/resource/ConfigCommandMappings.xml
INFO: Verifying target environment...
INFO: Checking whether the IP address of the localhost could be determined...
SEVERE: Unable to determine a valid IP for the localhost..
Refer associated stacktrace #oracle.install.driver.oui.OUISetupDriver:13
INFO: Completed verification of target environment.
WARNING: Verification of target environment returned with errors.
WARNING: [WARNING] [INS-06101] IP address of localhost could not be determined
CAUSE: The localhost is not mapped to a valid IP address in Hosts file (Eg. /etc/hosts in Unix).
ACTION: Assign a valid IP address for the localhost or set it to loopback IP address (127.0.0.1 in IPv4 or ::1 in IPv6).
SUMMARY:
- dhcppc0: dhcppc0.
Refer associated stacktrace #oracle.install.commons.util.exception.DefaultErrorAdvisor:16
INFO: Advice is WITHDRAW
WARNING: Advised to shutdown the installer due to target environment verification errors.
INFO: Adding ExitStatus PREREQ_FAILURE to the exit status set
INFO: Finding the most appropriate exit status for the current application
INFO: Exit Status is -3
INFO: Shutdown Oracle Database 11g Release 2 Installer
---------------------------------------------------------------------------------------------

Problem with Oracle 11g(32 bit) installation on windows 7 ultimate edition

Hello all,
I have a problem with Oracle 11g(32 bit) installation on windows 7 ultimate edition (32 bit).
I have successfully installed it immediately after OS installation. But today, i have decided to deinstall it and go for Oracle 10g version for 32 bit.
Everything went normal during installation, but i can see the services is not present in services.msc. Also its throwing some exception for dbca, netca
Now i tried to deinstall it and again go for 11g. But even the same story here..
Can anybody give me a solution for this..
-Regards
Rajesh Menon

Saqib Alam wrote:
i recently install Oracle 11g R1 on windows 7 ultimate, i installed it and working perfectly.
ur problem is that u install latest version and now u trying to installing old version.
now u need to uninstall 10g and delete oracle from services, if the probleme presist then u should
install fresh windows 7.
Regards
SaqibNo need to install a fresh OS. That's like tearing your house down just because you wired a lamp wrong and blew a circuit breaker.
There are MeaLink notes on how to eradicate an Oracle install from Windows, but it boils down to this:
Stop all Oracle services
In the registery:
- Delete all oracle services from the register (HKLM\SYSTEM\CurrentControlSet
- Delete the entire Oralce folder from HKLM\Software
reboot
Delete the ORACLE_HOME directory and any other Oracle related directories/files. Offhand, it seems like there is an Oracle directory under Program Files.
reboot

I just purchased a camera packaged with Adobe photoshop Elements 11. I have a mac book air- which does not have a cd drive. The package did not come with a code or anything that would provide me with another way to install photoshop that came with my came

I just purchased a camera packaged with Adobe photoshop Elements 11. I have a mac book air- which does not have a cd drive. The package did not come with a code or anything that would provide me with another way to install photoshop that came with my camera. Is there any other way i can install this on my camera without using the provided cd or buying the software again?

That doesn't help the user with the serial code though.
There has to be some kind of code somewhere within the package. The disk itself does not contain one. You can look here for help with finding your serial number:
Find your serial number quickly

VS2010 with Oracle 11g Release 2 giving Package did not load correctly

Similar Messages

Maybe you are looking for