VS2013 - Automated builds fail because of VS configuration corruption
I have a project which builds just fine, when run from the IDE (and the IDE appears to run fine without giving any visible errors). If I run it from PowerShell, I get errors. Fortunately, the script turns on logging. It looks like Visual Studio's managed
to hose itself, and for some reason DevEnv.exe can't handle it.
Here's what looks to be the relevant section of the log.xml file.
<entry>
<record>704</record>
<time>2015/01/07 16:55:36.179</time>
<type>Information</type>
<source>VisualStudio</source>
<description>PkgDefManagement startup complete</description>
</entry>
<entry>
<record>705</record>
<time>2015/01/07 16:55:36.189</time>
<type>Error</type>
<source>VisualStudio</source>
<description>Failed to read Version</description>
<hr>80070002</hr>
</entry>
<entry>
<record>706</record>
<time>2015/01/07 16:55:36.189</time>
<type>Error</type>
<source>VisualStudio</source>
<description>Binding Redirect / CodeBase entry from configuration hive is malformed, ignoring.</description>
<hr>80070002</hr>
<path>Software\Microsoft\VisualStudio\12.0_Config\RuntimeConfiguration\dependentAssembly\bindingRedirection\{BB256134-B73E-47AA-93B4-C49FF433E5B1}</path>
</entry>
<entry>
<record>707</record>
<time>2015/01/07 16:55:36.189</time>
<type>Warning</type>
<source>VisualStudio</source>
<description>Found both a Binding Redirection and a Code Base entries for the same Assembly. Ignoring Code Base, keeping Binding Redirection.</description>
<path>Microsoft.VisualStudio.TestPlatform.ObjectModel, Version=12.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a</path>
</entry>
<entry>
<record>708</record>
<time>2015/01/07 16:55:36.189</time>
<type>Warning</type>
<source>VisualStudio</source>
<description>Found both a Binding Redirection and a Code Base entries for the same Assembly. Ignoring Code Base, keeping Binding Redirection.</description>
<path>Microsoft.VisualStudio.TestWindow.Interfaces, Version=12.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a</path>
</entry>
And here's what I see in the log
------ Starting pre-build validation for project 'TargetedTherapySetup' ------
ERROR: An error occurred while validating. HRESULT = '8000000A'
------ Pre-build validation for project 'TargetedTherapySetup' completed ------
Any clue how to fix this?
Mike Swaim
Hi,
Glad to see this issue has been resolved. Thank you for sharing the solution here.
Thanks,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.
Similar Messages
-
AD RMS Setup failed because of invalid configuration setting
HI,
when I configure AD RMS configuration it gives me error that "one or more ADRMS role services could not be configured: AD RMS setup failed because of invalid configuraion setting". The user which I try to install is an administrator of DC
and also the service account is a member of enterprise domain group. When I tried this on test environment it works perfectly but on production environment it didn't. pls help me with this....
Thanks......
I am using windows 2012 standard Server..Hi,
Here are some related links below for your references:
Simple AD RMS 2008 R2 Fails
http://social.technet.microsoft.com/Forums/en-US/2733ddb4-131f-4162-b330-fd623b388f9b/simple-ad-rms-2008-r2-fails?forum=rms
AD RMS Troubleshooting Guide
http://social.technet.microsoft.com/wiki/contents/articles/13130.ad-rms-troubleshooting-guide.aspx
In order to solve this issue more efficiently, I suggest you refer to AD RMS forum to get professional support.
Active Directory Rights Management Services Forum
http://social.technet.microsoft.com/Forums/en-US/home?forum=rms
Best Regards,
Amy Wang -
[SOLVED] multipath-tools build fails because file is not a directory
Hi all,
I'm trying to build the multipath-tools-git AUR package (I'm playing around with virtualization, and need the kpartx tool). I tried building, and got this output:
(NOTE: /home/gregory/AUR PACKAGES is symlinked to /mnt/STORAGE/AUR PACKAGES, which shows up in this build. I tried building without using the symlink, and it didn't change anything.)
[gregory@whitcomb multipath-tools-git]$ makepkg -s
==> Making package: multipath-tools-git 1295.81895af-1 (Sat Sep 7 16:50:52 EDT 2013)
==> Checking runtime dependencies...
==> Checking buildtime dependencies...
==> Retrieving sources...
-> Updating multipath-tools-git git repo...
Fetching origin
==> Validating source files with md5sums...
multipath-tools-git ... Skipped
==> Extracting sources...
-> Creating working copy of git repo...
Cloning into 'multipath-tools-git'...
done.
==> Starting pkgver()...
==> Starting prepare()...
==> Removing existing pkg/ directory...
==> Starting build()...
make[1]: Entering directory `/mnt/STORAGE/AUR packages/multipath-tools-git/src/multipath-tools-git/libmultipath'
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -DLIBDM_API_FLUSH -D_GNU_SOURCE -DLIBDM_API_COOKIE -c -o memory.o memory.c
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -DLIBDM_API_FLUSH -D_GNU_SOURCE -DLIBDM_API_COOKIE -c -o parser.o parser.c
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -DLIBDM_API_FLUSH -D_GNU_SOURCE -DLIBDM_API_COOKIE -c -o vector.o vector.c
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -DLIBDM_API_FLUSH -D_GNU_SOURCE -DLIBDM_API_COOKIE -c -o devmapper.o devmapper.c
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -DLIBDM_API_FLUSH -D_GNU_SOURCE -DLIBDM_API_COOKIE -c -o callout.o callout.c
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -DLIBDM_API_FLUSH -D_GNU_SOURCE -DLIBDM_API_COOKIE -c -o hwtable.o hwtable.c
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -DLIBDM_API_FLUSH -D_GNU_SOURCE -DLIBDM_API_COOKIE -c -o blacklist.o blacklist.c
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -DLIBDM_API_FLUSH -D_GNU_SOURCE -DLIBDM_API_COOKIE -c -o util.o util.c
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -DLIBDM_API_FLUSH -D_GNU_SOURCE -DLIBDM_API_COOKIE -c -o dmparser.o dmparser.c
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -DLIBDM_API_FLUSH -D_GNU_SOURCE -DLIBDM_API_COOKIE -c -o config.o config.c
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -DLIBDM_API_FLUSH -D_GNU_SOURCE -DLIBDM_API_COOKIE -c -o structs.o structs.c
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -DLIBDM_API_FLUSH -D_GNU_SOURCE -DLIBDM_API_COOKIE -c -o discovery.o discovery.c
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -DLIBDM_API_FLUSH -D_GNU_SOURCE -DLIBDM_API_COOKIE -c -o propsel.o propsel.c
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -DLIBDM_API_FLUSH -D_GNU_SOURCE -DLIBDM_API_COOKIE -c -o dict.o dict.c
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -DLIBDM_API_FLUSH -D_GNU_SOURCE -DLIBDM_API_COOKIE -c -o pgpolicies.o pgpolicies.c
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -DLIBDM_API_FLUSH -D_GNU_SOURCE -DLIBDM_API_COOKIE -c -o debug.o debug.c
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -DLIBDM_API_FLUSH -D_GNU_SOURCE -DLIBDM_API_COOKIE -c -o regex.o regex.c
regex.c: In function ‘re_match_2’:
regex.c:3297:17: warning: variable ‘sdummy’ set but not used [-Wunused-but-set-variable]
const char *sdummy;
^
regex.c:3296:20: warning: variable ‘pdummy’ set but not used [-Wunused-but-set-variable]
unsigned char *pdummy;
^
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -DLIBDM_API_FLUSH -D_GNU_SOURCE -DLIBDM_API_COOKIE -c -o defaults.o defaults.c
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -DLIBDM_API_FLUSH -D_GNU_SOURCE -DLIBDM_API_COOKIE -c -o uevent.o uevent.c
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -DLIBDM_API_FLUSH -D_GNU_SOURCE -DLIBDM_API_COOKIE -c -o switchgroup.o switchgroup.c
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -DLIBDM_API_FLUSH -D_GNU_SOURCE -DLIBDM_API_COOKIE -c -o uxsock.o uxsock.c
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -DLIBDM_API_FLUSH -D_GNU_SOURCE -DLIBDM_API_COOKIE -c -o print.o print.c
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -DLIBDM_API_FLUSH -D_GNU_SOURCE -DLIBDM_API_COOKIE -c -o alias.o alias.c
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -DLIBDM_API_FLUSH -D_GNU_SOURCE -DLIBDM_API_COOKIE -c -o log_pthread.o log_pthread.c
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -DLIBDM_API_FLUSH -D_GNU_SOURCE -DLIBDM_API_COOKIE -c -o log.o log.c
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -DLIBDM_API_FLUSH -D_GNU_SOURCE -DLIBDM_API_COOKIE -c -o configure.o configure.c
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -DLIBDM_API_FLUSH -D_GNU_SOURCE -DLIBDM_API_COOKIE -c -o structs_vec.o structs_vec.c
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -DLIBDM_API_FLUSH -D_GNU_SOURCE -DLIBDM_API_COOKIE -c -o sysfs.o sysfs.c
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -DLIBDM_API_FLUSH -D_GNU_SOURCE -DLIBDM_API_COOKIE -c -o prio.o prio.c
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -DLIBDM_API_FLUSH -D_GNU_SOURCE -DLIBDM_API_COOKIE -c -o checkers.o checkers.c
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -DLIBDM_API_FLUSH -D_GNU_SOURCE -DLIBDM_API_COOKIE -c -o lock.o lock.c
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -DLIBDM_API_FLUSH -D_GNU_SOURCE -DLIBDM_API_COOKIE -c -o waiter.o waiter.c
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -DLIBDM_API_FLUSH -D_GNU_SOURCE -DLIBDM_API_COOKIE -c -o file.o file.c
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -DLIBDM_API_FLUSH -D_GNU_SOURCE -DLIBDM_API_COOKIE -c -o wwids.o wwids.c
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -DLIBDM_API_FLUSH -D_GNU_SOURCE -DLIBDM_API_COOKIE -c -o prioritizers/alua_rtpg.o prioritizers/alua_rtpg.c
cc -Wl,-O1,--sort-common,--as-needed,-z,relro -shared -Wl,-soname=libmultipath.so.0 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -DLIBDM_API_FLUSH -D_GNU_SOURCE -DLIBDM_API_COOKIE -o libmultipath.so.0 memory.o parser.o vector.o devmapper.o callout.o hwtable.o blacklist.o util.o dmparser.o config.o structs.o discovery.o propsel.o dict.o pgpolicies.o debug.o regex.o defaults.o uevent.o switchgroup.o uxsock.o print.o alias.o log_pthread.o log.o configure.o structs_vec.o sysfs.o prio.o checkers.o lock.o waiter.o file.o wwids.o prioritizers/alua_rtpg.o -lpthread -ldl -ldevmapper -ludev
ln -sf libmultipath.so.0 libmultipath.so
make[1]: Leaving directory `/mnt/STORAGE/AUR packages/multipath-tools-git/src/multipath-tools-git/libmultipath'
make[1]: Entering directory `/mnt/STORAGE/AUR packages/multipath-tools-git/src/multipath-tools-git/libmultipath/prioritizers'
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -I.. -c -o random.o random.c
cc -Wl,-O1,--sort-common,--as-needed,-z,relro -shared -o libpriorandom.so random.o
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -I.. -c -o const.o const.c
cc -Wl,-O1,--sort-common,--as-needed,-z,relro -shared -o libprioconst.so const.o
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -I.. -c -o hp_sw.o hp_sw.c
cc -Wl,-O1,--sort-common,--as-needed,-z,relro -shared -o libpriohp_sw.so hp_sw.o
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -I.. -c -o emc.o emc.c
cc -Wl,-O1,--sort-common,--as-needed,-z,relro -shared -o libprioemc.so emc.o
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -I.. -c -o rdac.o rdac.c
cc -Wl,-O1,--sort-common,--as-needed,-z,relro -shared -o libpriordac.so rdac.o
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -I.. -c -o alua.o alua.c
alua.c: In function ‘get_alua_info’:
alua.c:58:6: warning: variable ‘aas’ set but not used [-Wunused-but-set-variable]
int aas;
^
cc -Wl,-O1,--sort-common,--as-needed,-z,relro -shared -o libprioalua.so alua.o alua_rtpg.o
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -I.. -c -o ontap.o ontap.c
cc -Wl,-O1,--sort-common,--as-needed,-z,relro -shared -o libprioontap.so ontap.o
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -I.. -c -o datacore.o datacore.c
cc -Wl,-O1,--sort-common,--as-needed,-z,relro -shared -o libpriodatacore.so datacore.o
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -I.. -c -o hds.o hds.c
cc -Wl,-O1,--sort-common,--as-needed,-z,relro -shared -o libpriohds.so hds.o
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -I.. -c -o weightedpath.o weightedpath.c
cc -Wl,-O1,--sort-common,--as-needed,-z,relro -shared -o libprioweightedpath.so weightedpath.o
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -I.. -c -o iet.o iet.c
cc -Wl,-O1,--sort-common,--as-needed,-z,relro -shared -o libprioiet.so iet.o
rm random.o weightedpath.o ontap.o hp_sw.o hds.o rdac.o const.o datacore.o emc.o iet.o
make[1]: Leaving directory `/mnt/STORAGE/AUR packages/multipath-tools-git/src/multipath-tools-git/libmultipath/prioritizers'
make[1]: Entering directory `/mnt/STORAGE/AUR packages/multipath-tools-git/src/multipath-tools-git/libmultipath/checkers'
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -I.. -c -o libsg.o libsg.c
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -I.. -c -o cciss_tur.o cciss_tur.c
cc -Wl,-O1,--sort-common,--as-needed,-z,relro -shared -o libcheckcciss_tur.so libsg.o cciss_tur.o
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -I.. -c -o readsector0.o readsector0.c
cc -Wl,-O1,--sort-common,--as-needed,-z,relro -shared -o libcheckreadsector0.so libsg.o readsector0.o
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -I.. -c -o tur.o tur.c
cc -Wl,-O1,--sort-common,--as-needed,-z,relro -shared -o libchecktur.so libsg.o tur.o
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -I.. -c -o directio.o directio.c
cc -Wl,-O1,--sort-common,--as-needed,-z,relro -shared -o libcheckdirectio.so libsg.o directio.o -laio
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -I.. -c -o emc_clariion.o emc_clariion.c
cc -Wl,-O1,--sort-common,--as-needed,-z,relro -shared -o libcheckemc_clariion.so libsg.o emc_clariion.o
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -I.. -c -o hp_sw.o hp_sw.c
cc -Wl,-O1,--sort-common,--as-needed,-z,relro -shared -o libcheckhp_sw.so libsg.o hp_sw.o
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -I.. -c -o rdac.o rdac.c
cc -Wl,-O1,--sort-common,--as-needed,-z,relro -shared -o libcheckrdac.so libsg.o rdac.o
rm tur.o hp_sw.o rdac.o readsector0.o cciss_tur.o emc_clariion.o
make[1]: Leaving directory `/mnt/STORAGE/AUR packages/multipath-tools-git/src/multipath-tools-git/libmultipath/checkers'
make[1]: Entering directory `/mnt/STORAGE/AUR packages/multipath-tools-git/src/multipath-tools-git/libmpathpersist'
cc -Wall -fPIC -c -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -I../libmultipath -I../libmpathpersist *.c
cc -shared -lpthread -ldevmapper -ldl -L../libmultipath -lmultipath -Wl,-soname=libmpathpersist.so.0 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -I../libmultipath -I../libmpathpersist -o libmpathpersist.so.0 mpath_persist.o mpath_updatepr.o mpath_pr_ioctl.o
ln -s libmpathpersist.so.0 libmpathpersist.so
/usr/bin/gzip -9 -c mpath_persistent_reserve_in.3 > mpath_persistent_reserve_in.3.gz
/usr/bin/gzip -9 -c mpath_persistent_reserve_out.3 > mpath_persistent_reserve_out.3.gz
make[1]: Leaving directory `/mnt/STORAGE/AUR packages/multipath-tools-git/src/multipath-tools-git/libmpathpersist'
make[1]: Entering directory `/mnt/STORAGE/AUR packages/multipath-tools-git/src/multipath-tools-git/multipath'
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -I../libmultipath -c -o main.o main.c
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -I../libmultipath main.o -o multipath -Wl,-O1,--sort-common,--as-needed,-z,relro -lpthread -ldevmapper -ldl -L../libmultipath -lmultipath -ludev
/usr/bin/gzip -9 -c multipath.8 > multipath.8.gz
/usr/bin/gzip -9 -c multipath.conf.5 > multipath.conf.5.gz
make[1]: Leaving directory `/mnt/STORAGE/AUR packages/multipath-tools-git/src/multipath-tools-git/multipath'
make[1]: Entering directory `/mnt/STORAGE/AUR packages/multipath-tools-git/src/multipath-tools-git/multipathd'
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -I../libmultipath -I../libmpathpersist -c -o main.o main.c
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -I../libmultipath -I../libmpathpersist -c -o pidfile.o pidfile.c
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -I../libmultipath -I../libmpathpersist -c -o uxlsnr.o uxlsnr.c
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -I../libmultipath -I../libmpathpersist -c -o uxclnt.o uxclnt.c
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -I../libmultipath -I../libmpathpersist -c -o cli.o cli.c
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -I../libmultipath -I../libmpathpersist -c -o cli_handlers.o cli_handlers.c
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -I../libmultipath -I../libmpathpersist main.o pidfile.o uxlsnr.o uxclnt.o cli.o cli_handlers.o -Wl,-O1,--sort-common,--as-needed,-z,relro -lpthread -ldevmapper -lreadline -ludev -ldl -L../libmultipath -lmultipath -L../libmpathpersist -lmpathpersist -o multipathd
/usr/bin/gzip -9 -c multipathd.8 > multipathd.8.gz
make[1]: Leaving directory `/mnt/STORAGE/AUR packages/multipath-tools-git/src/multipath-tools-git/multipathd'
make[1]: Entering directory `/mnt/STORAGE/AUR packages/multipath-tools-git/src/multipath-tools-git/mpathpersist'
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -I../libmultipath -I../libmpathpersist -c -o main.o main.c
cc -g main.o -o mpathpersist -Wl,-O1,--sort-common,--as-needed,-z,relro -lpthread -ldevmapper -L../libmpathpersist -lmpathpersist -L../libmultipath -lmultipath -ludev -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -I../libmultipath -I../libmpathpersist
/usr/bin/gzip -9 -c mpathpersist.8 > mpathpersist.8.gz
make[1]: Leaving directory `/mnt/STORAGE/AUR packages/multipath-tools-git/src/multipath-tools-git/mpathpersist'
make[1]: Entering directory `/mnt/STORAGE/AUR packages/multipath-tools-git/src/multipath-tools-git/kpartx'
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -I. -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -DLIBDM_API_COOKIE -c -o bsd.o bsd.c
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -I. -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -DLIBDM_API_COOKIE -c -o dos.o dos.c
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -I. -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -DLIBDM_API_COOKIE -c -o kpartx.o kpartx.c
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -I. -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -DLIBDM_API_COOKIE -c -o solaris.o solaris.c
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -I. -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -DLIBDM_API_COOKIE -c -o unixware.o unixware.c
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -I. -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -DLIBDM_API_COOKIE -c -o dasd.o dasd.c
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -I. -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -DLIBDM_API_COOKIE -c -o sun.o sun.c
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -I. -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -DLIBDM_API_COOKIE -c -o gpt.o gpt.c
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -I. -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -DLIBDM_API_COOKIE -c -o mac.o mac.c
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -I. -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -DLIBDM_API_COOKIE -c -o ps3.o ps3.c
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -I. -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -DLIBDM_API_COOKIE -c -o crc32.o crc32.c
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -I. -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -DLIBDM_API_COOKIE -c -o lopart.o lopart.c
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -I. -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -DLIBDM_API_COOKIE -c -o xstrncpy.o xstrncpy.c
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -I. -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -DLIBDM_API_COOKIE -c -o devmapper.o devmapper.c
cc bsd.o dos.o kpartx.o solaris.o unixware.o dasd.o sun.o gpt.o mac.o ps3.o crc32.o lopart.o xstrncpy.o devmapper.o -o kpartx -ldevmapper
/usr/bin/gzip -9 -c kpartx.8 > kpartx.8.gz
make[1]: Leaving directory `/mnt/STORAGE/AUR packages/multipath-tools-git/src/multipath-tools-git/kpartx'
==> Entering fakeroot environment...
==> Starting package()...
make[1]: Entering directory `/mnt/STORAGE/AUR packages/multipath-tools-git/src/multipath-tools-git/libmultipath'
install -d /home/gregory/AUR packages/multipath-tools-git/pkg/multipath-tools-git//usr/lib
install -m 755 libmultipath.so.0 /home/gregory/AUR packages/multipath-tools-git/pkg/multipath-tools-git//usr/lib/libmultipath.so.0
install: target ‘packages/multipath-tools-git/pkg/multipath-tools-git//usr/lib/libmultipath.so.0’ is not a directory
make[1]: *** [install] Error 1
make[1]: Leaving directory `/mnt/STORAGE/AUR packages/multipath-tools-git/src/multipath-tools-git/libmultipath'
make: *** [recurse_install] Error 2
==> ERROR: A failure occurred in package().
Aborting...
[gregory@whitcomb multipath-tools-git]$
I noticed there was a typo from the line:
install: target ‘packages/multipath-tools-git/pkg/multipath-tools-git//usr/lib/libmultipath.so.0’ is not a directory
with the duplicated slash, so I edited the package() section of the PKGBUILD to remove the duplicated slash
make LIB="/usr/lib" DESTDIR="${pkgdir}" install
to
make LIB="usr/lib" DESTDIR="${pkgdir}" install
However, rebuilding the package caused the same error to occur (only relevant part shown)
==> Starting package()...
make[1]: Entering directory `/mnt/STORAGE/AUR packages/multipath-tools-git/src/multipath-tools-git/libmultipath'
install -d /home/gregory/AUR packages/multipath-tools-git/pkg/multipath-tools-git/usr/lib
install -m 755 libmultipath.so.0 /home/gregory/AUR packages/multipath-tools-git/pkg/multipath-tools-git/usr/lib/libmultipath.so.0
install: target ‘packages/multipath-tools-git/pkg/multipath-tools-git/usr/lib/libmultipath.so.0’ is not a directory
make[1]: *** [install] Error 1
make[1]: Leaving directory `/mnt/STORAGE/AUR packages/multipath-tools-git/src/multipath-tools-git/libmultipath'
make: *** [recurse_install] Error 2
==> ERROR: A failure occurred in package().
Aborting...
So that couldn't have been the problem. There doesn't seem to be any indication on the AUR page that someone else ran into this problem. I also checked the upstream site as well as the mailing lists, and didn't see anything resembling my problem.
Just to make sure that I hadn't downloaded some bad build from git, I also tried installing the multipath-tools package from the AUR, since that should have at least worked for the packager. However, I got the exact same (albeit sooner cause it didn't have to download git sources):
==> Starting package()...
make[1]: Entering directory `/mnt/STORAGE/AUR packages/multipath-tools/src/libmultipath'
install -d /mnt/STORAGE/AUR packages/multipath-tools/pkg/multipath-tools/usr/lib
install -m 755 libmultipath.so.0 /mnt/STORAGE/AUR packages/multipath-tools/pkg/multipath-tools/usr/lib/libmultipath.so.0
install: target ‘packages/multipath-tools/pkg/multipath-tools/usr/lib/libmultipath.so.0’ is not a directory
make[1]: *** [install] Error 1
make[1]: Leaving directory `/mnt/STORAGE/AUR packages/multipath-tools/src/libmultipath'
make: *** [recurse_install] Error 2
==> ERROR: A failure occurred in package().
Aborting...
I'm guessing there's probably some configuration issue with my machine causing this problem, but I have no idea where it would come from. If anybody else has any other ideas on how to proceed, I'd be really appreciative. And if any more information is needed, let me know! Thanks!
Last edited by cactaur (2013-09-08 05:23:36)Of course, soon after I post this, I stumble upon the solution. It turns out that having a path with a space in it can cause certain packages to bug out while building. I changed the "AUR Packages" folder to "AUR-packages", and then it built successfully. Guess that's something to look out for.
-
HI,
when I configure AD RMS configuration it gives me error that "one or more ADRMS role services could not be configured: AD RMS setup failed because of invalid configuraion setting". The user which I try to install is an administrator of DC and
also the service account is a member of enterprise domain group. When I tried this on test environment it works perfectly but on production environment it didn't. pls help me with this....
Thanks......
I am using windows 2012 standard Server..HI Eddie,
Thanks for reply.. Pls find the debug log below... It says " Message: The 'http://tempuri.org/RMProvisionSettingsSchema.xsd:Domain' element is invalid - The value 'D' is invalid according to its datatype 'http://tempuri.org/RMProvisionSettingsSchema.xsd:WindowsDomainName'
- The actual length is less than the MinLength value. "
00000706 56.78187180
[11964] CallStack:Microsoft.RightsManagementServices.Configuration.HelperMethods.IsValidConfigSetting
00000707 56.78187180
[11964] System.Xml.Schema.XmlSchemaValidationException
00000708 56.78187180
[11964] Message: The 'http://tempuri.org/RMProvisionSettingsSchema.xsd:Domain' element is invalid - The value 'D' is invalid according to its datatype 'http://tempuri.org/RMProvisionSettingsSchema.xsd:WindowsDomainName' -
The actual length is less than the MinLength value.
00000709 56.78187180
[11964] StackTrace: at Microsoft.RightsManagementServices.Configuration.HelperMethods.ProvisionSchemaValidationEventHandler(Object sender, ValidationEventArgs e)
00000710 56.78187180
[11964] at System.Xml.Schema.XmlSchemaValidator.CheckElementValue(String stringValue)
00000711 56.78187180
[11964] at System.Xml.Schema.XmlSchemaValidator.ValidateAtomicValue(String stringValue, XmlSchemaSimpleType& memberType)
00000712 56.78187180
[11964] at System.Xml.Schema.XmlSchemaValidator.InternalValidateEndElement(XmlSchemaInfo schemaInfo, Object typedValue)
00000713 56.78187180
[11964] at System.Xml.DocumentSchemaValidator.ValidateElement()
00000714 56.78187180
[11964] at System.Xml.DocumentSchemaValidator.ValidateNode(XmlNode node)
00000715 56.78187180
[11964] at System.Xml.DocumentSchemaValidator.ValidateElement()
00000716 56.78187180
[11964] at System.Xml.DocumentSchemaValidator.ValidateNode(XmlNode node)
00000717 56.78187180
[11964] at System.Xml.DocumentSchemaValidator.ValidateElement()
00000718 56.78187180
[11964] at System.Xml.DocumentSchemaValidator.ValidateNode(XmlNode node)
00000719 56.78187180
[11964] at System.Xml.DocumentSchemaValidator.ValidateElement()
00000720 56.78187180
[11964] at System.Xml.DocumentSchemaValidator.ValidateNode(XmlNode node)
00000721 56.78187180
[11964] at System.Xml.DocumentSchemaValidator.ValidateElement()
00000722 56.78187180
[11964] at System.Xml.DocumentSchemaValidator.ValidateNode(XmlNode node)
00000723 56.78187180
[11964] at System.Xml.DocumentSchemaValidator.ValidateNode(XmlNode node)
00000724 56.78187180
[11964] at System.Xml.DocumentSchemaValidator.Validate(XmlNode nodeToValidate)
00000725 56.78187180
[11964] at System.Xml.XmlDocument.Validate(ValidationEventHandler validationEventHandler, XmlNode nodeToValidate)
00000726 56.78187180
[11964] at Microsoft.RightsManagementServices.Configuration.HelperMethods.IsValidConfigSetting(ConfigOperationType configOperation)
00000727 56.78187180
[11964]
00000728 56.78199768
[11964] -Microsoft.RightsManagementServices.Configuration.Commands.InstallADRMS.ProcessRecord
00000729 56.84855270
[11964] +Microsoft.RightsManagementServices.Configuration.DeploymentPSProvider.RemoveDrive
00000730 56.84864807
[11964] -Microsoft.RightsManagementServices.Configuration.DeploymentPSProvider.RemoveDrive
00000731 56.86203766
[23784] +[Tier2Diagnostic]
00000732 56.86203766
[23784] CallStack:System.Windows.Threading.ExceptionWrapper.InternalRealCall
00000733 56.86203766
[23784] Microsoft.ADRoles.ServerManager.Common.PowerShellRemoting.RemotingException
00000734 56.86203766
[23784] Message: AD RMS setup failed because of invalid configuration settings.
00000735 56.86203766
[23784] StackTrace: at Microsoft.ADRoles.ServerManager.Common.PowerShellRemoting.WorkflowExecutor.ExecuteCommand(Command workflowCommand, EventHandler`1 outputEventsHandler, EventHandler`1 progressEventHandler,
EventHandler`1 finishedEventHandler, EventHandler`1 warningEventHandler, EventHandler`1 errorEventHandler)
00000736 56.86203766
[23784] at Microsoft.RightsManagementServices.Deployment.M3PPowerShellEngine.ExecuteCommand(CmdletProperties propertyBag, EventHandler`1 outputHandler, EventHandler`1 progressStatusHandler, EventHandler`1 progressPercentageHandler, EventHandler`1
warningHandler, EventHandler`1 errorHandler)
00000737 56.86203766
[23784] at Microsoft.RightsManagementServices.Deployment.AbstractPowerShellProvider.<>c__DisplayClass3`1.<ExecuteAsynchronously>b__0(Object sender, DoWorkEventArgs eventArgs)
00000738 56.86203766
[23784] at Microsoft.RightsManagementServices.Configuration.AbortableBackgroundWorker.OnDoWork(DoWorkEventArgs e)
00000739 56.86203766
[23784] at System.ComponentModel.BackgroundWorker.WorkerThreadStart(Object argument)
00000740 56.86203766
[23784] + System.Management.Automation.RemoteException
00000741 56.86203766
[23784] + Message: AD RMS setup failed because of invalid configuration settings.
00000742 56.86203766
[23784] + StackTrace:
00000743 56.86203766
[23784]
00000744 56.86225891
[23784] +[Tier2Diagnostic] One or more AD RMS role services could not be configured:
00000745 56.86225891
[23784] CallStack:Microsoft.RightsManagementServices.Configuration.AbortableBackgroundWorker`1+<>c__DisplayClass1.<Run>b__0
00000746 56.86225891
[23784] Microsoft.ADRoles.ServerManager.Common.PowerShellRemoting.RemotingException
00000747 56.86225891
[23784] Message: AD RMS setup failed because of invalid configuration settings.
00000748 56.86225891
[23784] StackTrace: at Microsoft.ADRoles.ServerManager.Common.PowerShellRemoting.WorkflowExecutor.ExecuteCommand(Command workflowCommand, EventHandler`1 outputEventsHandler, EventHandler`1 progressEventHandler,
EventHandler`1 finishedEventHandler, EventHandler`1 warningEventHandler, EventHandler`1 errorEventHandler)
00000749 56.86225891
[23784] at Microsoft.RightsManagementServices.Deployment.M3PPowerShellEngine.ExecuteCommand(CmdletProperties propertyBag, EventHandler`1 outputHandler, EventHandler`1 progressStatusHandler, EventHandler`1 progressPercentageHandler, EventHandler`1
warningHandler, EventHandler`1 errorHandler)
00000750 56.86225891
[23784] at Microsoft.RightsManagementServices.Deployment.AbstractPowerShellProvider.<>c__DisplayClass3`1.<ExecuteAsynchronously>b__0(Object sender, DoWorkEventArgs eventArgs)
00000751 56.86225891
[23784] at Microsoft.RightsManagementServices.Configuration.AbortableBackgroundWorker.OnDoWork(DoWorkEventArgs e)
00000752 56.86225891
[23784] at System.ComponentModel.BackgroundWorker.WorkerThreadStart(Object argument)
00000753 56.86225891
[23784] + System.Management.Automation.RemoteException
00000754 56.86225891
[23784] + Message: AD RMS setup failed because of invalid configuration settings.
00000755 56.86225891
[23784] + StackTrace:
00000756 56.86225891
[23784]
00000757 56.86357880
[23784] PageLeave: Progress
00000758 56.86389160
[23784] ErrorNotification: <null>
00000759 56.86653519
[23784] PageEnter: Results
00000760 56.89128876
[23784] +[Tier2Diagnostic] One or more AD RMS role services could not be configured:
00000761 56.89128876
[23784] CallStack:Microsoft.RightsManagementServices.Deployment.ViewModel.ResultsPageViewModel.SetUpResultDetails
00000762 56.89128876
[23784] System.Management.Automation.ApplicationFailedException
00000763 56.89128876
[23784] Message: One or more AD RMS role services could not be configured:
00000764 56.89128876
[23784] StackTrace:
00000765 56.89128876
[23784] + Microsoft.ADRoles.ServerManager.Common.PowerShellRemoting.RemotingException
00000766 56.89128876
[23784] + Message: AD RMS setup failed because of invalid configuration settings.
00000767 56.89128876
[23784] + StackTrace: at Microsoft.ADRoles.ServerManager.Common.PowerShellRemoting.WorkflowExecutor.ExecuteCommand(Command workflowCommand, EventHandler`1 outputEventsHandler, EventHandler`1 progressEventHandler,
EventHandler`1 finishedEventHandler, EventHandler`1 warningEventHandler, EventHandler`1 errorEventHandler)
00000768 56.89128876
[23784] at Microsoft.RightsManagementServices.Deployment.M3PPowerShellEngine.ExecuteCommand(CmdletProperties propertyBag, EventHandler`1 outputHandler, EventHandler`1 progressStatusHandler, EventHandler`1 progressPercentageHandler, EventHandler`1
warningHandler, EventHandler`1 errorHandler)
00000769 56.89128876
[23784] at Microsoft.RightsManagementServices.Deployment.AbstractPowerShellProvider.<>c__DisplayClass3`1.<ExecuteAsynchronously>b__0(Object sender, DoWorkEventArgs eventArgs)
00000770 56.89128876
[23784] at Microsoft.RightsManagementServices.Configuration.AbortableBackgroundWorker.OnDoWork(DoWorkEventArgs e)
00000771 56.89128876
[23784] at System.ComponentModel.BackgroundWorker.WorkerThreadStart(Object argument)
00000772 56.89128876
[23784] + System.Management.Automation.RemoteException
00000773 56.89128876
[23784] + Message: AD RMS setup failed because of invalid configuration settings.
00000774 56.89128876
[23784] + StackTrace:
00000775 56.89128876
[23784]
00000776 56.89152908
[23784] +[Tier2Diagnostic] OnOperationError
00000777 56.89152908
[23784] CallStack:Microsoft.RightsManagementServices.Configuration.AbortableBackgroundWorker`1+<>c__DisplayClass1.<Run>b__0
00000778 56.89152908
[23784] System.Management.Automation.ApplicationFailedException
00000779 56.89152908
[23784] Message: One or more AD RMS role services could not be configured:
00000780 56.89152908
[23784] StackTrace:
00000781 56.89152908
[23784] + Microsoft.ADRoles.ServerManager.Common.PowerShellRemoting.RemotingException
00000782 56.89152908
[23784] + Message: AD RMS setup failed because of invalid configuration settings.
00000783 56.89152908
[23784] + StackTrace: at Microsoft.ADRoles.ServerManager.Common.PowerShellRemoting.WorkflowExecutor.ExecuteCommand(Command workflowCommand, EventHandler`1 outputEventsHandler, EventHandler`1 progressEventHandler,
EventHandler`1 finishedEventHandler, EventHandler`1 warningEventHandler, EventHandler`1 errorEventHandler)
00000784 56.89152908
[23784] at Microsoft.RightsManagementServices.Deployment.M3PPowerShellEngine.ExecuteCommand(CmdletProperties propertyBag, EventHandler`1 outputHandler, EventHandler`1 progressStatusHandler, EventHandler`1 progressPercentageHandler, EventHandler`1
warningHandler, EventHandler`1 errorHandler)
00000785 56.89152908
[23784] at Microsoft.RightsManagementServices.Deployment.AbstractPowerShellProvider.<>c__DisplayClass3`1.<ExecuteAsynchronously>b__0(Object sender, DoWorkEventArgs eventArgs)
00000786 56.89152908
[23784] at Microsoft.RightsManagementServices.Configuration.AbortableBackgroundWorker.OnDoWork(DoWorkEventArgs e)
00000787 56.89152908
[23784] at System.ComponentModel.BackgroundWorker.WorkerThreadStart(Object argument)
00000788 56.89152908
[23784] + System.Management.Automation.RemoteException
00000789 56.89152908
[23784] + Message: AD RMS setup failed because of invalid configuration settings.
00000790 56.89152908
[23784] + StackTrace:
00000791 56.89152908
[23784] -
Build failed during Oracle Central office and back office configuration
Hi,
We are trying to install Oracle Retail POS. While configuring Central Office Ver 12.01 and back office 12.01, it is giving following Build error. Please advise.
BUILD FAILED
D:\POS-INTL\ORCO-12.01\build.xml:499: The following error occurred while executing this line:
D:\POS-INTL\ORCO-12.01\build.xml:553: The following error occurred while executing this line:
D:\POS-INTL\ORCO-12.01\build.xml:1480: org.xml.sax.SAXParseException: <Line 1, Column 16>: XML-20201: (Fatal Error) Expected name instead of /.
Thanks,
MeenaYou might want to post your question in following forum:
Retail -
VS Project build fails on TSQL Code in script.
Hi there,
I have the following issue on which I've done some research, but nothing helps.
The database project I am working on compiles everything but one script. The scripts folder has 3 scripts, a controller that calls the remainder two.
One of these scripts fail on SQL syntax which is weird because they seem to be okay and SSMS would not complain. Having experimented a little I found that any SQL statement fails on syntax, there must be a configuration issue here.
What I have tried so far:
-add the script as a stored procedure and reference it within the script, so that the script will have one line only (EXEC usp_BuildTestData - it is needless to say that the stored procedure compiles well...)
-create a new script file (without build) from within VS.
-check if the script file BuildAction property is set to None
-load the script file and switch off the SQLCMD mode in t-SQL Editor Execution settings.
Build still fails with SQL72007: The syntax check failed 'Incorrect syntax near EXEC' in the batch near 'EXEC usp_BuildTestData '.
I thought this was a common error or at least something I could easily find a solution for.
Unfortunately VS is somewhat new to me.
Any ideas are appreciated.
Versions:
Visual Studio Pro 2012 (Version 11.0.50727.1 RTMREL) (.Net FW: 4.5.50709)
Target database version: SQL 2008R2 (this is set in the project's target platform setting)Hi Tina,
Thank you for getting back to me. I inherited the project file in subject therefore I cannot tell how it was created. But, I tried re-creating the database project from scratch that resulted in the same error. Steps below:
-Select New Solution/ new SQL Server database project
-Copy the sql files and folders into solution folder then map them into the project file
-build the project.
The database is based upon C#.
The idea of the post deployment script is that it builds test data in the freshly deployed application. It uses a linked server that points to production and selects some data.
I continued experimenting with the post deployment script and found something interesting.
So 1 of the invoked scripts fail on the SQL syntax. This is a simple line EXEC usp_BuildTestData.
The other that compiles well is an ALTER VIEW. I pasted the EXEC... line after this and it worked. It builds now. (I have removed the remaining empty script file, so I have 1 post deployment script file now that invokes 1 script only.
I tried comparing the two files but concluded in the fact that each property is the same (Buildaction=None, CopyAlways) in both files.
This proves to me that the SQL code was correct, I did not leave obvious mistakes in it.
The "bad" script file fails on syntax, regardless of what I give in. I tried recreating by clicking 'Add new item' then selecting Script (Not in build). Did not help unfortunately. Once referenced in the PostDeployment script, build fails. -
Hello all,
I am new to CAF developing, and I am experiencing this problem: When I create new CAF DC and when I add only one entity service (only adding no other customization) a try to build this occurs through building:
0.3.2006 18:37:30 /userOut/Development Component (com.sap.ide.eclipse.component.provider.listener.DevConfListener) [Thread[ModalContext,5,main]] ERROR: test3/ejbmodule: Build failed for sk.globesy/test3/ejbmodule(MyComponents) in variant "default": JDO enhancer failed because of internal Error.
Build log -
Development Component Build (2006-03-30 18:37:28)
Component name: test3/ejbmodule
Component vendor: sk.globesy
SC compartment: MyComponents
Configuration: LocalDevelopment
Location: local
Source code location: koskarm@gn10
DC root folder: C:\Documents and Settings\koskarm\.dtc\LocalDevelopment\DCs\sk.globesy\test3\ejbmodule\_comp\
DC type: J2EE
DC subtype: EJBModule
Host: gn10
DC Model check:
[dcmake] All used DCs are available locally
[dcmake] validating dependency to build plugin "sap.com/tc/bi/bp/ejbmodule"
[dcmake] validating dependency to public part "default" of DC "sap.com/ejb20"
[dcmake] validating dependency to public part "default" of DC "sap.com/jdbc20"
[dcmake] validating dependency to public part "default" of DC "sap.com/jms"
[dcmake] validating dependency to public part "default" of DC "sap.com/tc/ddic/metamodel/content"
[dcmake] validating dependency to public part "CAFRuntimeAPI" of DC "sap.com/caf/runtime/impl"
[dcmake] validating dependency to public part "default" of DC "sap.com/bi/mmr/core"
[dcmake] validating dependency to public part "compilation" of DC "sap.com/caf/metamodel"
[dcmake] validating dependency to public part "default" of DC "sap.com/com.sap.security.api.sda"
[dcmake] validating dependency to public part "default" of DC "sap.com/tc/logging"
[dcmake] validating dependency to public part "default" of DC "sap.com/com.sap.exception"
[dcmake] validating dependency to public part "default" of DC "sap.com/com.sap.jdo"
[dcmake] validating dependency to public part "compilation" of DC "sap.com/bi/mmr/cwm_1.0_source"
[dcmake] validating dependency to public part "jmi" of DC "sap.com/bi/mmr/jmi"
[dcmake] validating dependency to public part "ClientApi" of DC "sap.com/caf/km.proxyjava"
[dcmake] validating dependency to public part "default" of DC "sap.com/bi/mmr/db"
[dcmake] validating dependency to public part "ClientAPI" of DC "sap.com/caf/runtime/security"
[dcmake] validating dependency to public part "ClientAPI" of DC "sap.com/caf/core/services"
[dcmake] validating dependency to used DC "sap.com/caf/runtime/connectivity/base"
[dcmake] validating dependency to used DC "sap.com/caf/runtime/connectivity"
[dcmake] validating dependency to used DC "sap.com/applocking"
[dcmake] validating dependency to public part "default" of DC "sap.com/com.sap.engine.client.lib"
[dcmake] validating dependency to public part "default" of DC "sap.com/kernel.sda"
[dcmake] DC model check OK
Start build plugin:
[dcmake] using build plugin: sap.com/tc/bi/bp/ejbmodule
[dcmake] starting build plugin from : C:\Program Files\SAP\JDT\eclipse\plugins\com.sap.tc.ap\comp\SAP_BUILDT\DCs\sap.com\tc\bi\bp\ejbmodule\_comp\gen\default\public\ejb\
Build Plugin 'EJB Module Plugin', Version 6.40 SP 15 (630_VAL_REL, built on 2005-11-25 00:23:07 CET)
development component: test3/ejbmodule (sk.globesy)
type: J2EE, subtype: EJBModule
software component: MyComponents (sap.com)
location: local
source location: koskarm@gn10
build variant: default
plugin start time: 2006-03-30 18:37:28 GMT+01:00 (CEST)
Java VM: Java HotSpot(TM) Client VM, 1.5.0_01-b08 (Sun Microsystems Inc.)
General options:
convert *.xlf to *.properties: yes
include sources for debugging: yes
Reading BuildInfrastructure extension from DC tc/bi/javatech (sap.com)
Reading BuildInfrastructure extension from DC tc/bi/util (sap.com)
Added technology 'sap.com/tc/bi/core'
Added technology 'sap.com/tc/bi/javatech'
Plugin initialized in 0.031 seconds
Preparing data context..
No 'default' JDK defined, will use running VM.
Data context prepared in 0.015 seconds
Executing macro file..
Using macro file: C:\Program Files\SAP\JDT\eclipse\plugins\com.sap.tc.ap\comp\SAP_BUILDT\DCs\sap.com\tc\bi\bp\ejbmodule\_comp\gen\default\public\ejb\macros\build.vm
Creating output file: C:\Documents and Settings\koskarm\.dtc\LocalDevelopment\DCs\sk.globesy\test3\ejbmodule\_comp\gen\default\logs\build.xml
Macro file executed in 0.047 seconds
Starting Ant..
Using build file: C:\Documents and Settings\koskarm\.dtc\LocalDevelopment\DCs\sk.globesy\test3\ejbmodule\_comp\gen\default\logs\build.xml
Using build target: build
Generation folder: C:\Documents and Settings\koskarm\.dtc\LocalDevelopment\t\EE76BAB34EE55D9582B939C3638F656A
Ant build started at 2006-03-30 18:37:28 GMT+01:00 (CEST)
Using Ant version 1.5.4
prepare:
compile:
[javac] Compiling 7 source files to C:\Documents and Settings\koskarm\.dtc\LocalDevelopment\t\EE76BAB34EE55D9582B939C3638F656A\classes
Note: Some input files use unchecked or unsafe operations.
Note: Recompile with -Xlint:unchecked for details.
[timer] Java compiler finished in 1.547 seconds
[echo] Calling JDOEnhance task
[jdo.enhance] Using classfile: C:\Documents and Settings\koskarm\.dtc\LocalDevelopment\t\EE76BAB34EE55D9582B939C3638F656A\classes/globesy\sk\test3\besrv\testa\TestA.class
[jdo.enhance] Using metadata : C:\Documents and Settings\koskarm\.dtc\LocalDevelopment\DCs\sk.globesy\test3\ejbmodule\_comp\/ejbModule/globesy\sk\test3\besrv\testa\TestA.jdo
[jdo.enhance] Using dst : C:\Documents and Settings\koskarm\.dtc\LocalDevelopment\t\EE76BAB34EE55D9582B939C3638F656A\classes
Error while enhancing: JDO ENHANCER: At least one error occurred while enhancing input class for Transparent Persistence; detailed message(s): I/O error while reading input stream or input stream does not denote a valid Java class.
com.sap.jdo.enhancer.EnhancerUserException: JDO ENHANCER: At least one error occurred while enhancing input class for Transparent Persistence; detailed message(s): I/O error while reading input stream or input stream does not denote a valid Java class.
at com.sap.jdo.enhancer.filter.Enhancer.enhanceClassFile(Enhancer.java:238)
at com.sap.jdo.enhancer.Main.enhanceClassFile(Main.java:516)
at com.sap.jdo.enhancer.Main.enhanceInputFiles(Main.java:474)
at com.sap.jdo.enhancer.Main.process(Main.java:139)
at com.sap.jdo.anttasks.JDOEnhance.run(JDOEnhance.java:99)
at com.sap.jdo.anttasks.JDOEnhance.execute(JDOEnhance.java:82)
at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:193)
at org.apache.tools.ant.Task.perform(Task.java:341)
at org.apache.tools.ant.Target.execute(Target.java:309)
at org.apache.tools.ant.Target.performTasks(Target.java:336)
at org.apache.tools.ant.Project.executeTarget(Project.java:1339)
at com.sap.tc.buildplugin.techdev.ant.util.AntRunner.run(AntRunner.java:115)
at com.sap.tc.buildplugin.AbstractAntBuildAction.execute(AbstractAntBuildAction.java:65)
at com.sap.tc.buildplugin.AbstractPlugin.handleBuildStepSequence(AbstractPlugin.java:217)
at com.sap.tc.buildplugin.AbstractPlugin.performBuild(AbstractPlugin.java:193)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.sap.tc.buildtool.PluginCommunicator.maybeInvoke(PluginCommunicator.java:114)
at com.sap.tc.buildtool.PluginCommunicatorV2.communicate(PluginCommunicatorV2.java:42)
at com.sap.tc.buildtool.PluginHandlerImpl.handlePluginCommunication(PluginHandlerImpl.java:345)
at com.sap.tc.buildtool.PluginHandlerImpl.execute(PluginHandlerImpl.java:175)
at com.sap.tc.devconf.impl.DCProxy.make(DCProxy.java:1726)
at com.sap.tc.devconf.impl.DCProxy.make(DCProxy.java:5548)
at com.sap.caf.designer.actions.DcBuildAction.buildDCsForDevConfig(DcBuildAction.java:768)
at com.sap.caf.designer.actions.DcBuildAction.access$300(DcBuildAction.java:84)
at com.sap.caf.designer.actions.DcBuildAction$1.run(DcBuildAction.java:500)
at org.eclipse.jface.operation.ModalContext$ModalContextThread.run(ModalContext.java:101)
aborted with errors.
Ant build finished with ERRORS
file:C:/Documents and Settings/koskarm/.dtc/LocalDevelopment/DCs/sk.globesy/test3/ejbmodule/_comp/gen/default/logs/build.xml:308: JDO enhancer failed because of internal Error.
Ant build finished at 2006-03-30 18:37:30 GMT+01:00 (CEST), Duration: 1.75 seconds
Build finished with ERROR
Cleaning up.
Total build plug-in runtime: 2.109 seconds
My coleague have installed fresh installation of NWDS SPS15 and the same example on his installation work fine. All building proccesses are successfully executed. I tried it several times, everytime same result. I tried to use fresh workspace, tried to delete whole content in ./dtc.
I compared every file with coleague installation. But no success. I am running out of ideas what should I do with it.
If anyone was facing similar problem or have any idea. I will be glad to read it.
Thanks
Best regards Miroslav KoskarHi,
I have similar error:
Can anybody help me?
Regards.
[jdo.enhance] WARNING: Caused by: com.sap.jdo.enhancer.util.UserException: The byte code of the class file has version 1.6. This is not supported by the JDO enhancer. Please compile with the option -target 1.5.
[jdo.enhance] WARNING: at com.sap.jdo.enhancer.classfile.ClassFile.assertSupportedVersion(ClassFile.java:101)
[jdo.enhance] WARNING: at com.sap.jdo.enhancer.classfile.ClassFile.<init>(ClassFile.java:364)
[jdo.enhance] WARNING: at com.sap.jdo.enhancer.filter.Enhancer.enhanceClassFile1(Enhancer.java:144)
[jdo.enhance] WARNING: at com.sap.jdo.enhancer.filter.Enhancer.enhanceClassFile(Enhancer.java:192)
[jdo.enhance] WARNING: ... 45 more
[jdo.enhance] aborted with errors.
Ant runtime 1.07 seconds
Ant build finished with ERRORS
JDO enhancer failed because of unknown Error: 1
Build stopped due to an error: JDO enhancer failed because of unknown Error: 1
Build plugin finished at 2013-03-14 12:59:22 GMT+01:00 (CET)
Total build plugin runtime: 1.34 seconds
Build finished with ERROR -
Hi All,
I am trying to build an Entity Service in CAF. But it is unable to create the EJB Module.
Error:
JDO enhancer failed because of internal Error.
Error: Build stopped due to an error: JDO enhancer failed because of internal Error.
Can any one tell wht the exact problem is and how to rectify it.
Thanks,
Chaitanya.Development Component Build (2008-06-10 19:04:46)
Component name: sample/ejbmodule
Component vendor: sap.com
SC compartment: MyComponents
Configuration: LocalDevelopment
Location: local
Source code location: szp7rn@w2szp7rn01
DC root folder: D:\Documents and Settings\szp7rn.GEMSCONSULT\.dtc\LocalDevelopment\DCs\sap.com\sample\ejbmodule\_comp\
DC type: J2EE
DC subtype: EJBModule
Host: w2szp7rn01
DC Model check:
All used DCs are available locally
validating dependency to build plugin "sap.com/tc/bi/bp/ejbmodule"
validating dependency to public part "default" of DC "sap.com/ejb20"
validating dependency to public part "default" of DC "sap.com/jdbc20"
validating dependency to public part "default" of DC "sap.com/jms"
validating dependency to public part "default" of DC "sap.com/tc/ddic/metamodel/content"
validating dependency to public part "CAFRuntimeAPI" of DC "sap.com/caf/runtime/impl"
validating dependency to public part "compilation" of DC "sap.com/caf/runtime/api"
validating dependency to public part "default" of DC "sap.com/bi/mmr/core"
validating dependency to public part "compilation" of DC "sap.com/caf/metamodel"
validating dependency to public part "default" of DC "sap.com/com.sap.security.api.sda"
validating dependency to public part "default" of DC "sap.com/tc/logging"
validating dependency to public part "default" of DC "sap.com/com.sap.exception"
validating dependency to public part "default" of DC "sap.com/com.sap.jdo"
validating dependency to public part "compilation" of DC "sap.com/bi/mmr/cwm_1.0_source"
validating dependency to public part "jmi" of DC "sap.com/bi/mmr/jmi"
validating dependency to public part "ClientApi" of DC "sap.com/caf/km.proxyjava"
validating dependency to public part "default" of DC "sap.com/bi/mmr/db"
validating dependency to public part "ClientAPI" of DC "sap.com/caf/runtime/security"
validating dependency to public part "ClientAPI" of DC "sap.com/caf/core/services"
validating dependency to used DC "sap.com/caf/runtime/connectivity/base"
validating dependency to used DC "sap.com/caf/runtime/connectivity"
validating dependency to used DC "sap.com/applocking"
validating dependency to public part "default" of DC "sap.com/com.sap.engine.client.lib"
validating dependency to public part "default" of DC "sap.com/jta"
DC model check OK
Start build plugin:
using build plugin: sap.com/tc/bi/bp/ejbmodule
starting build plugin from : C:\Program Files\SAP\IDE\IDE70\eclipse\plugins\com.sap.tc.ap_2.0.0\comp\SAP_BUILDT\DCs\sap.com\tc\bi\bp\ejbmodule\_comp\gen\default\public\ejb\
Build Plugin 'EJBModulePlugin', Version 7.00 SP 9 (NW04S_09_REL, built on 2006-10-25 22:26:50 CEST)
development component: sample/ejbmodule (sap.com)
software component: MyComponents (demo.sap.com)
location: local
type: J2EE, subtype EJBModule
build variant: default
source location: szp7rn@w2szp7rn01
plugin start time: 2008-06-10 19:04:46 GMT+05:30 (IST)
Java VM: Java HotSpot(TM) Client VM, 1.5.0_12-b04 (Sun Microsystems Inc.)
General options:
convert *.xlf to *.properties: yes
include sources for debugging: yes
Source folder src exists but is empty.
Plugin initialized in 0.063 seconds
Preparing data context..
No 'default' JDK defined, will use running VM.
Data context prepared in 0.031 seconds
Executing macro file..
Using macro file: C:\Program Files\SAP\IDE\IDE70\eclipse\plugins\com.sap.tc.ap_2.0.0\comp\SAP_BUILDT\DCs\sap.com\tc\bi\bp\ejbmodule\_comp\gen\default\public\ejb\macros\build.vm
Creating output file: D:\Documents and Settings\szp7rn.GEMSCONSULT\.dtc\LocalDevelopment\DCs\sap.com\sample\ejbmodule\_comp\gen\default\logs\build.xml
Macro file executed in 0.172 seconds
Starting Ant..
Using build file: D:\Documents and Settings\szp7rn.GEMSCONSULT\.dtc\LocalDevelopment\DCs\sap.com\sample\ejbmodule\_comp\gen\default\logs\build.xml
Using build target: build
Generation folder: D:\Documents and Settings\szp7rn.GEMSCONSULT\.dtc\LocalDevelopment\t\81C8304DFA221C7AF5F2C84019FF3C43
Using Ant version: 1.6.2
compile:
[echo] Starting Java compiler
[echo] Settings:
[echo] debug: on
[echo] optimize: off
[echo] deprecation: off
[echo] verbose: default
[echo] encoding: UTF8
[echo] source: default
[echo] target: default
[echo] source path: D:\Documents and Settings\szp7rn.GEMSCONSULT\.dtc\LocalDevelopment\DCs\sap.com\sample\ejbmodule\_comp\ejbModule
[echo] class path:
[echo] C:\Program Files\SAP\IDE\IDE70\eclipse\plugins\com.sap.tc.ap_2.0.0\comp\SAP-JEE\DCs\sap.com\tc\logging\_comp\gen\default\public\default\lib\java\logging.jar
[echo] C:\Program Files\SAP\IDE\IDE70\eclipse\plugins\com.sap.tc.ap_2.0.0\comp\SAP-JEE\DCs\sap.com\tc\logging\_comp\gen\default\public\default\lib\java\logging.perf.jar
[echo] C:\Program Files\SAP\IDE\IDE70\eclipse\plugins\com.sap.tc.ap_2.0.0\comp\SAP_JTECHS\DCs\sap.com\tc\ddic\metamodel\content\_comp\gen\default\public\default\lib\java\SapMetamodelDictionaryContent.zip
[echo] C:\Program Files\SAP\IDE\IDE70\eclipse\plugins\com.sap.tc.ap_2.0.0\comp\SAP_JTECHS\DCs\sap.com\com.sap.jdo\_comp\gen\default\public\default\lib\java\jdo.jar
[echo] C:\Program Files\SAP\IDE\IDE70\eclipse\plugins\com.sap.tc.ap_2.0.0\comp\SAP_JTECHS\DCs\sap.com\com.sap.jdo\_comp\gen\default\public\default\lib\java\sapjdoapi.jar
[echo] C:\Program Files\SAP\IDE\IDE70\eclipse\plugins\com.sap.tc.ap_2.0.0\comp\BI_UDI\DCs\sap.com\bi\mmr\jmi\_comp\gen\default\public\jmi\lib\java\sap.combimmrjmijmi.jar
[echo] C:\Program Files\SAP\IDE\IDE70\eclipse\plugins\com.sap.tc.ap_2.0.0\comp\BI_UDI\DCs\sap.com\bi\mmr\core\_comp\gen\default\public\default\lib\java\sap.combimmrcoredefault.jar
[echo] C:\Program Files\SAP\IDE\IDE70\eclipse\plugins\com.sap.tc.ap_2.0.0\comp\CAF\DCs\sap.com\caf\km.proxyjava\_comp\gen\default\public\ClientApi\lib\java\sap.comcafkm.proxyjava~ClientApi.jar
[echo] C:\Program Files\SAP\IDE\IDE70\eclipse\plugins\com.sap.tc.ap_2.0.0\comp\SAP-JEE\DCs\sap.com\applocking\_comp\gen\default\public\default\lib\java\applocking.jar
[echo] C:\Program Files\SAP\IDE\IDE70\eclipse\plugins\com.sap.tc.ap_2.0.0\comp\SAP-JEE\DCs\sap.com\applocking\_comp\gen\default\public\default\lib\java\frame.jar
[echo] C:\Program Files\SAP\IDE\IDE70\eclipse\plugins\com.sap.tc.ap_2.0.0\comp\SAP-JEE\DCs\sap.com\applocking\_comp\gen\default\public\default\lib\java\jdbc.jar
[echo] C:\Program Files\SAP\IDE\IDE70\eclipse\plugins\com.sap.tc.ap_2.0.0\comp\CAF\DCs\sap.com\caf\metamodel\_comp\gen\default\public\compilation\lib\java\sap.comcafmetamodel.jar
[echo] C:\Program Files\SAP\IDE\IDE70\eclipse\plugins\com.sap.tc.ap_2.0.0\comp\CAF\DCs\sap.com\caf\metamodel\_comp\gen\default\public\compilation\lib\java\sap.comcafmetamodel_JMI.jar
[echo] C:\Program Files\SAP\IDE\IDE70\eclipse\plugins\com.sap.tc.ap_2.0.0\comp\CAF\DCs\sap.com\caf\metamodel\_comp\gen\default\public\compilation\lib\java\sap.comcafmetamodel_JMI_src.jar
[echo] C:\Program Files\SAP\IDE\IDE70\eclipse\plugins\com.sap.tc.ap_2.0.0\comp\SAP-JEE\DCs\sap.com\com.sap.engine.client.lib\_comp\gen\default\public\default\lib\java\sapj2eeclient.jar
[echo] C:\Program Files\SAP\IDE\IDE70\eclipse\plugins\com.sap.tc.ap_2.0.0\comp\CAF\DCs\sap.com\caf\runtime\connectivity\base\_comp\gen\default\public\com.sap.caf.mp.base\lib\java\sap.comcafruntimeconnectivitybase~com.sap.caf.mp.base.jar
[echo] C:\Program Files\SAP\IDE\IDE70\eclipse\plugins\com.sap.tc.ap_2.0.0\comp\CAF\DCs\sap.com\caf\runtime\security\_comp\gen\default\public\ClientAPI\lib\java\sap.comcafruntimesecurityClientAPI.jar
[echo] C:\Program Files\SAP\IDE\IDE70\eclipse\plugins\com.sap.tc.ap_2.0.0\comp\CAF\DCs\sap.com\caf\runtime\api\_comp\gen\default\public\compilation\lib\java\sap.comcafruntimeapicompilation.jar
[echo] C:\Program Files\SAP\IDE\IDE70\eclipse\plugins\com.sap.tc.ap_2.0.0\comp\SAP-JEE\DCs\sap.com\jdbc20\_comp\gen\default\public\default\lib\java\jdbc.jar
[echo] C:\Program Files\SAP\IDE\IDE70\eclipse\plugins\com.sap.tc.ap_2.0.0\comp\BI_UDI\DCs\sap.com\bi\mmr\cwm_1.0_source\_comp\gen\default\public\compilation\lib\java\sap.combimmr~cwm_1.0_source.jar
[echo] C:\Program Files\SAP\IDE\IDE70\eclipse\plugins\com.sap.tc.ap_2.0.0\comp\BI_UDI\DCs\sap.com\bi\mmr\cwm_1.0_source\_comp\gen\default\public\compilation\lib\java\sap.combimmr~cwm_1.0_source_JMI.jar
[echo] C:\Program Files\SAP\IDE\IDE70\eclipse\plugins\com.sap.tc.ap_2.0.0\comp\BI_UDI\DCs\sap.com\bi\mmr\cwm_1.0_source\_comp\gen\default\public\compilation\lib\java\sap.combimmr~cwm_1.0_source_JMI_src.jar
[echo] C:\Program Files\SAP\IDE\IDE70\eclipse\plugins\com.sap.tc.ap_2.0.0\comp\CAF\DCs\sap.com\caf\runtime\impl\_comp\gen\default\public\CAFRuntimeAPI\lib\java\sap.comcafruntimeimplCAFRuntimeAPI.jar
[echo] C:\Program Files\SAP\IDE\IDE70\eclipse\plugins\com.sap.tc.ap_2.0.0\comp\SAP-JEE\DCs\sap.com\ejb20\_comp\gen\default\public\default\lib\java\ejb20.jar
[echo] C:\Program Files\SAP\IDE\IDE70\eclipse\plugins\com.sap.tc.ap_2.0.0\comp\SAP-JEE\DCs\sap.com\jms\_comp\gen\default\public\default\lib\java\jms.jar
[echo] C:\Program Files\SAP\IDE\IDE70\eclipse\plugins\com.sap.tc.ap_2.0.0\comp\SAP-JEE\DCs\sap.com\com.sap.security.api.sda\_comp\gen\default\public\default\lib\java\com.sap.security.api.jar
[echo] C:\Program Files\SAP\IDE\IDE70\eclipse\plugins\com.sap.tc.ap_2.0.0\comp\SAP-JEE\DCs\sap.com\com.sap.security.api.sda\_comp\gen\default\public\default\lib\java\com.sap.security.api.perm.jar
[echo] C:\Program Files\SAP\IDE\IDE70\eclipse\plugins\com.sap.tc.ap_2.0.0\comp\SAP-JEE\DCs\sap.com\jta\_comp\gen\default\public\default\lib\java\jta.jar
[echo] C:\Program Files\SAP\IDE\IDE70\eclipse\plugins\com.sap.tc.ap_2.0.0\comp\CAF\DCs\sap.com\caf\core\services\_comp\gen\default\public\ClientAPI\lib\java\sap.comcafcoreservicesClientAPI.jar
[echo] C:\Program Files\SAP\IDE\IDE70\eclipse\plugins\com.sap.tc.ap_2.0.0\comp\SAP-JEE\DCs\sap.com\com.sap.exception\_comp\gen\default\public\default\lib\java\exception.jar
[echo] C:\Program Files\SAP\IDE\IDE70\eclipse\plugins\com.sap.tc.ap_2.0.0\comp\CAF\DCs\sap.com\caf\runtime\connectivity\_comp\gen\default\public\com.sap.caf.mp.core.api\lib\java\sap.comcafruntimeconnectivitycom.sap.caf.mp.core.api.jar
[echo] C:\Program Files\SAP\IDE\IDE70\eclipse\plugins\com.sap.tc.ap_2.0.0\comp\BI_UDI\DCs\sap.com\bi\mmr\db\_comp\gen\default\public\default\lib\java\sap.combimmrdbdefault.jar
[echo] output dir: D:\Documents and Settings\szp7rn.GEMSCONSULT\.dtc\LocalDevelopment\t\81C8304DFA221C7AF5F2C84019FF3C43\classes
[javac] Compiling 9 source files to D:\Documents and Settings\szp7rn.GEMSCONSULT\.dtc\LocalDevelopment\t\81C8304DFA221C7AF5F2C84019FF3C43\classes
[javac] Note: Some input files use unchecked or unsafe operations.
[javac] Note: Recompile with -Xlint:unchecked for details.
[timer] Java compilation finished in 1.672 seconds
[echo] Starting JDO enhancer
[jdo.enhance] Using classfile: D:\Documents and Settings\szp7rn.GEMSCONSULT\.dtc\LocalDevelopment\t\81C8304DFA221C7AF5F2C84019FF3C43\classes\com\sap\sample\besrv\test\testJDO.class
[jdo.enhance] Using metadata : D:\Documents and Settings\szp7rn.GEMSCONSULT\.dtc\LocalDevelopment\DCs\sap.com\sample\ejbmodule\_comp\ejbModule\com\sap\sample\besrv\test\testJDO.jdo
[jdo.enhance] Using dst : D:\Documents and Settings\szp7rn.GEMSCONSULT\.dtc\LocalDevelopment\t\81C8304DFA221C7AF5F2C84019FF3C43\classes
[jdo.enhance] Error while enhancing: JDO ENHANCER: At least one error occurred while enhancing input class for Transparent Persistence; detailed message(s): I/O error while reading input stream or input stream does not denote a valid Java class.
[jdo.enhance] ERROR: com.sap.jdo.enhancer.EnhancerUserException: JDO ENHANCER: At least one error occurred while enhancing input class for Transparent Persistence; detailed message(s): I/O error while reading input stream or input stream does not denote a valid Java class.
[jdo.enhance] ERROR: at com.sap.jdo.enhancer.filter.Enhancer.enhanceClassFile(Enhancer.java:238)
[jdo.enhance] ERROR: at com.sap.jdo.enhancer.Main.enhanceClassFile(Main.java:514)
[jdo.enhance] ERROR: at com.sap.jdo.enhancer.Main.enhanceInputFiles(Main.java:474)
[jdo.enhance] ERROR: at com.sap.jdo.enhancer.Main.process(Main.java:137)
[jdo.enhance] ERROR: at com.sap.jdo.anttasks.JDOEnhance.run(JDOEnhance.java:99)
[jdo.enhance] ERROR: at com.sap.jdo.anttasks.JDOEnhance.execute(JDOEnhance.java:82)
[jdo.enhance] ERROR: at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:275)
[jdo.enhance] ERROR: at org.apache.tools.ant.Task.perform(Task.java:364)
[jdo.enhance] ERROR: at org.apache.tools.ant.Target.execute(Target.java:341)
[jdo.enhance] ERROR: at org.apache.tools.ant.Target.performTasks(Target.java:369)
[jdo.enhance] ERROR: at org.apache.tools.ant.Project.executeTarget(Project.java:1214)
[jdo.enhance] ERROR: at com.sap.tc.buildplugin.techdev.ant.util.AntRunner.run(AntRunner.java:111)
[jdo.enhance] ERROR: at com.sap.tc.buildplugin.DefaultAntBuildAction.execute(DefaultAntBuildAction.java:62)
[jdo.enhance] ERROR: at com.sap.tc.buildplugin.AbstractPlugin.handleBuildStepSequence(AbstractPlugin.java:222)
[jdo.enhance] ERROR: at com.sap.tc.buildplugin.AbstractPlugin.performBuild(AbstractPlugin.java:199)
[jdo.enhance] ERROR: at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
[jdo.enhance] ERROR: at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
[jdo.enhance] ERROR: at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
[jdo.enhance] ERROR: at java.lang.reflect.Method.invoke(Method.java:585)
[jdo.enhance] ERROR: at com.sap.tc.buildtool.PluginCommunicator.maybeInvoke(PluginCommunicator.java:114)
[jdo.enhance] ERROR: at com.sap.tc.buildtool.PluginCommunicatorV2.communicate(PluginCommunicatorV2.java:42)
[jdo.enhance] ERROR: at com.sap.tc.buildtool.PluginHandlerImpl.handlePluginCommunication(PluginHandlerImpl.java:354)
[jdo.enhance] ERROR: at com.sap.tc.buildtool.PluginHandlerImpl.execute(PluginHandlerImpl.java:176)
[jdo.enhance] ERROR: at com.sap.tc.devconf.impl.DCProxy.make(DCProxy.java:1723)
[jdo.enhance] ERROR: at com.sap.tc.devconf.impl.DCProxy.make(DCProxy.java:5615)
[jdo.enhance] ERROR: at com.sap.caf.designer.actions.DcBuildAction.buildDCsForDevConfig(DcBuildAction.java:764)
[jdo.enhance] ERROR: at com.sap.caf.designer.actions.DcBuildAction.access$300(DcBuildAction.java:78)
[jdo.enhance] ERROR: at com.sap.caf.designer.actions.DcBuildAction$1.run(DcBuildAction.java:499)
[jdo.enhance] ERROR: at org.eclipse.jface.operation.ModalContext$ModalContextThread.run(ModalContext.java:101)
[jdo.enhance] aborted with errors.
Ant runtime 2.187 seconds
Ant build finished with ERRORS
JDO enhancer failed because of internal Error.
Error: Build stopped due to an error: JDO enhancer failed because of internal Error.
Build plugin finished at 2008-06-10 19:04:48 GMT+05:30 (IST)
Total build plugin runtime: 2.531 seconds
Build finished with ERROR -
Automated build server for Arch? (like the sourceforge build system)
Has someone considered some kind of automated build system for Arch?
Something that would work like this:
- It'd have every library and dependency possible installed.
- It'd intelligently read the makefiles produced to see what libraries they used and compare them against a lookup table to see what Arch dependencies they then required. Failing that, it could use ldd and a second lookup table that matched libraries to packages.
- It'd attempt to figure out the target binary to run (again, from the makefiles produced), and then run it. If it worked, it'd be marked as usable. If it didn't work, it'd be marked as needing fixing.
All of these points can fail, especially in the parsing of the makefiles; in each case, this would be noted by the system and user action could be taken.
In operation, it wouldn't take away from users managing their own packages. It'd just provide a secure environment to build packages in, and attempt to automate some of the process. In the best cases, the system would theoretically be capable enough to download a package's sourcecode, ./configure it, make it, make a package out of it, get the package verified as usable, then update the repo with it.
Note the verification step in the previous paragraph: I would never want this to be an automated system. Sure, it sound amazing on paper, and might even work for a little while, but sooner or later something would come crashing down and since repo management is quite a trust-based issue, everyone would freak out and they wouldn't want the build server anymore.
-dav7
Last edited by dav7 (2008-10-17 18:41:22)Who would have access to upload to such a build server? If it's the general public, then this is a security nightmare, as well as a growth curve nightmare. The monetary investment for a project like this would need to come from somewhere.
And yeah, something like this has been considered, and a working proof-of-concept has been sitting around for years. http://projects.archlinux.org/?p=pacbuild.git;a=summary . What this kind of project really needs is someone with some distributed computing smarts and dedication (and time) to get it off the ground in a form that will survive past a proof-of-concept barebones implementation.
One of the largest design challenges would be dependency resolution for batch upgrades. For instance, let's say we update libfoobar, which is depended upon by foo, bar, baz, and batman, the system needs to know that libfoobar needs to be built and installed in order to compile the rest of them against it. -
[solved] glib-git build fails with gdbus-codegen/python error
Has anyone succeeded to install glib-git lately? For me, the build fails with the following error:
Making all in tests
make[4]: Entering directory `/tmp/clyde-carlos/glib-git/glib-git/src/glib-build/gio/tests'
GEN gdbus-test-codegen-generated.c
Traceback (most recent call last):
File "../../gio/gdbus-codegen/codegen_main.py", line 200, in <module>
codegen_main()
File "../../gio/gdbus-codegen/codegen_main.py", line 171, in codegen_main
parsed_ifaces = parser.parse_dbus_xml(xml_data)
File "/tmp/clyde-carlos/glib-git/glib-git/src/glib-build/gio/gdbus-codegen/parser.py", line 289, in parse_dbus_xml
parser = DBusXMLParser(xml_data)
File "/tmp/clyde-carlos/glib-git/glib-git/src/glib-build/gio/gdbus-codegen/parser.py", line 57, in __init__
self._parser.Parse(xml_data)
File "/tmp/clyde-carlos/glib-git/glib-git/src/glib-build/gio/gdbus-codegen/parser.py", line 155, in handle_start_element
if attrs.has_key('name') and self.doc_comment_last_symbol == attrs['name']:
AttributeError: 'dict' object has no attribute 'has_key'
make[4]: *** [gdbus-test-codegen-generated.c] Error 1
make[4]: Leaving directory `/tmp/clyde-carlos/glib-git/glib-git/src/glib-build/gio/tests'
make[3]: *** [all-recursive] Error 1
make[3]: Leaving directory `/tmp/clyde-carlos/glib-git/glib-git/src/glib-build/gio'
make[2]: *** [all] Error 2
make[2]: Leaving directory `/tmp/clyde-carlos/glib-git/glib-git/src/glib-build/gio'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/tmp/clyde-carlos/glib-git/glib-git/src/glib-build'
make: *** [all] Error 2
==> ERROR: A failure occurred in build().
Aborting...
It is not the PKGBUILD's fault, apparently, as the same error occurs when I autogen-configure-make manually. So is there something wrong with my system, the python setup maybe? (I tried manually replacing "python" by "python2.7" in the Makefile – no success.) Or is it an upstream bug, maybe related to this bug? Is there anything I can do?
Sorry if the answer is obvious, but I really do not feel like I understand this python stuff properly. Also, sorry for duplicating my AUR comments – it was only today that I figured I might get more response in the forum.
Last edited by Franek (2011-08-23 13:33:23)Don't panic, I don't. Just did not have time before now.
EDIT: Done. I am still throwing in the towel, though. I was trying to make a gtkmm-git PKGBUILD, because I need the latest gtkmm for development. However for gtkmm-git I needed gtk-git, for which I needed glib-git and pango-git. I successfully (at least it appears so) managed to install glib-git and pango-git, but now I get a linker error with gtk-git and will not spend another day looking for its source. I will just wait until gtkmm-3.1 is released.
EDIT 2: Alright, it appears there must have been something wrong with my "successfull" installs as well, as I just started a gtk app (Balsa) and it did not have any font, just rectangles for letters. Replacing glib-git and pango-git with their stable counterparts turned everything right again.
Last edited by Franek (2011-08-23 20:46:47) -
[build failed] meterbridge (hence jack_capture)
Hi,
I tried to install jack_capture, who depends on meterbridge.
Alas, bukd of meterbridge fails :
main.o: In function `main':
/tmp/yaourt-tmp-calou/aur-meterbridge/meterbridge/src/meterbridge-0.9.2/src/main.c:137: undefined reference to `SDL_Init'
/tmp/yaourt-tmp-calou/aur-meterbridge/meterbridge/src/meterbridge-0.9.2/src/main.c:138: undefined reference to `SDL_GetError'
/tmp/yaourt-tmp-calou/aur-meterbridge/meterbridge/src/meterbridge-0.9.2/src/main.c:176: undefined reference to `SDL_SetVideoMode'
..... etc etc. (full copy paste below)
I do have SDL and SDL_image installed
(I have early any SDL "extra" package)
I googled bit, found http://www.gamedev.net/community/forums … _id=260057
bot no solution
sdl-config --libs answers : "-L/usr/lib -lSDL -lpthread"
I tried to download original meterbridge tarball, but the result is not better (even worse I'd say, as compilation fails telling :
"vu_meters.c:11: error: static declaration of 'buf_rect' follows non-static declaration").
Any tip/help would be appreciated !
As promised, here's the full output :
==> Entering fakeroot environment...
==> Starting build()...
checking for a BSD-compatible install... /bin/install -c
checking whether build environment is sane... yes
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking for gcc... gcc
checking for C compiler default output... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ANSI C... none needed
checking for style of include used by make... GNU
checking dependency style of gcc... gcc3
checking for pthread_self in -lpthread... yes
checking for sqrt in -lm... yes
checking build system type... x86_64-unknown-linux-gnu
checking host system type... x86_64-unknown-linux-gnu
checking target system type... x86_64-unknown-linux-gnu
checking for sdl-config... /usr/bin/sdl-config
checking for SDL - version >= 1.2.0... yes
checking for pkg-config... /usr/bin/pkg-config
checking for jack... yes
checking JACK_CFLAGS...
checking JACK_LIBS... -ljack -lpthread -lrt
checking how to run the C preprocessor... gcc -E
checking for egrep... grep -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for stdlib.h... (cached) yes
checking for string.h... (cached) yes
checking for unistd.h... (cached) yes
checking for an ANSI C-conforming const... yes
checking for inline... inline
checking for atexit... yes
configure: creating ./config.status
config.status: creating Makefile
config.status: creating graphics/Makefile
config.status: creating src/Makefile
config.status: creating src/config.h
config.status: src/config.h is unchanged
config.status: executing depfiles commands
Making all in src
make[1]: Entering directory `/tmp/yaourt-tmp-calou/aur-meterbridge/meterbridge/src/meterbridge-0.9.2/src'
make all-am
make[2]: Entering directory `/tmp/yaourt-tmp-calou/aur-meterbridge/meterbridge/src/meterbridge-0.9.2/src'
source='main.c' object='main.o' libtool=no \
depfile='.deps/main.Po' tmpdepfile='.deps/main.TPo' \
depmode=gcc3 /bin/sh ../depcomp \
gcc -DHAVE_CONFIG_H -I. -I. -I. -Wall -g -I/usr/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT -DPKG_DATA_DIR=\"/usr/share/meterbridge\" -c `test -f 'main.c' || echo './'`main.c
source='vu_meters.c' object='vu_meters.o' libtool=no \
depfile='.deps/vu_meters.Po' tmpdepfile='.deps/vu_meters.TPo' \
depmode=gcc3 /bin/sh ../depcomp \
gcc -DHAVE_CONFIG_H -I. -I. -I. -Wall -g -I/usr/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT -DPKG_DATA_DIR=\"/usr/share/meterbridge\" -c `test -f 'vu_meters.c' || echo './'`vu_meters.c
source='ppm_meters.c' object='ppm_meters.o' libtool=no \
depfile='.deps/ppm_meters.Po' tmpdepfile='.deps/ppm_meters.TPo' \
depmode=gcc3 /bin/sh ../depcomp \
gcc -DHAVE_CONFIG_H -I. -I. -I. -Wall -g -I/usr/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT -DPKG_DATA_DIR=\"/usr/share/meterbridge\" -c `test -f 'ppm_meters.c' || echo './'`ppm_meters.c
source='dpm_meters.c' object='dpm_meters.o' libtool=no \
depfile='.deps/dpm_meters.Po' tmpdepfile='.deps/dpm_meters.TPo' \
depmode=gcc3 /bin/sh ../depcomp \
gcc -DHAVE_CONFIG_H -I. -I. -I. -Wall -g -I/usr/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT -DPKG_DATA_DIR=\"/usr/share/meterbridge\" -c `test -f 'dpm_meters.c' || echo './'`dpm_meters.c
source='jf_meters.c' object='jf_meters.o' libtool=no \
depfile='.deps/jf_meters.Po' tmpdepfile='.deps/jf_meters.TPo' \
depmode=gcc3 /bin/sh ../depcomp \
gcc -DHAVE_CONFIG_H -I. -I. -I. -Wall -g -I/usr/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT -DPKG_DATA_DIR=\"/usr/share/meterbridge\" -c `test -f 'jf_meters.c' || echo './'`jf_meters.c
source='scope.c' object='scope.o' libtool=no \
depfile='.deps/scope.Po' tmpdepfile='.deps/scope.TPo' \
depmode=gcc3 /bin/sh ../depcomp \
gcc -DHAVE_CONFIG_H -I. -I. -I. -Wall -g -I/usr/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT -DPKG_DATA_DIR=\"/usr/share/meterbridge\" -c `test -f 'scope.c' || echo './'`scope.c
source='envelopes.c' object='envelopes.o' libtool=no \
depfile='.deps/envelopes.Po' tmpdepfile='.deps/envelopes.TPo' \
depmode=gcc3 /bin/sh ../depcomp \
gcc -DHAVE_CONFIG_H -I. -I. -I. -Wall -g -I/usr/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT -DPKG_DATA_DIR=\"/usr/share/meterbridge\" -c `test -f 'envelopes.c' || echo './'`envelopes.c
gcc -Wall -g -I/usr/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT -DPKG_DATA_DIR=\"/usr/share/meterbridge\" -Wl,--hash-style=gnu -Wl,--as-needed -o meterbridge -lm -ljack -lpthread -lrt -L/usr/lib -lSDL -lpthread -lSDL_image main.o linedraw.o vu_meters.o ppm_meters.o dpm_meters.o jf_meters.o scope.o envelopes.o find_image.o -lm -lpthread
main.o: In function `main':
/tmp/yaourt-tmp-calou/aur-meterbridge/meterbridge/src/meterbridge-0.9.2/src/main.c:137: undefined reference to `SDL_Init'
/tmp/yaourt-tmp-calou/aur-meterbridge/meterbridge/src/meterbridge-0.9.2/src/main.c:138: undefined reference to `SDL_GetError'
/tmp/yaourt-tmp-calou/aur-meterbridge/meterbridge/src/meterbridge-0.9.2/src/main.c:176: undefined reference to `SDL_SetVideoMode'
/tmp/yaourt-tmp-calou/aur-meterbridge/meterbridge/src/meterbridge-0.9.2/src/main.c:178: undefined reference to `SDL_GetError'
/tmp/yaourt-tmp-calou/aur-meterbridge/meterbridge/src/meterbridge-0.9.2/src/main.c:191: undefined reference to `SDL_UpperBlit'
/tmp/yaourt-tmp-calou/aur-meterbridge/meterbridge/src/meterbridge-0.9.2/src/main.c:201: undefined reference to `SDL_UpperBlit'
/tmp/yaourt-tmp-calou/aur-meterbridge/meterbridge/src/meterbridge-0.9.2/src/main.c:208: undefined reference to `SDL_UpdateRects'
/tmp/yaourt-tmp-calou/aur-meterbridge/meterbridge/src/meterbridge-0.9.2/src/main.c:216: undefined reference to `jack_client_new'
/tmp/yaourt-tmp-calou/aur-meterbridge/meterbridge/src/meterbridge-0.9.2/src/main.c:222: undefined reference to `SDL_WM_SetCaption'
/tmp/yaourt-tmp-calou/aur-meterbridge/meterbridge/src/meterbridge-0.9.2/src/main.c:227: undefined reference to `SDL_CreateThread'
/tmp/yaourt-tmp-calou/aur-meterbridge/meterbridge/src/meterbridge-0.9.2/src/main.c:230: undefined reference to `SDL_CreateThread'
/tmp/yaourt-tmp-calou/aur-meterbridge/meterbridge/src/meterbridge-0.9.2/src/main.c:233: undefined reference to `SDL_CreateThread'
/tmp/yaourt-tmp-calou/aur-meterbridge/meterbridge/src/meterbridge-0.9.2/src/main.c:236: undefined reference to `SDL_CreateThread'
/tmp/yaourt-tmp-calou/aur-meterbridge/meterbridge/src/meterbridge-0.9.2/src/main.c:239: undefined reference to `SDL_CreateThread'
/tmp/yaourt-tmp-calou/aur-meterbridge/meterbridge/src/meterbridge-0.9.2/src/main.c:246: undefined reference to `jack_set_process_callback'
/tmp/yaourt-tmp-calou/aur-meterbridge/meterbridge/src/meterbridge-0.9.2/src/main.c:248: undefined reference to `jack_set_process_callback'
/tmp/yaourt-tmp-calou/aur-meterbridge/meterbridge/src/meterbridge-0.9.2/src/main.c:250: undefined reference to `jack_set_process_callback'
/tmp/yaourt-tmp-calou/aur-meterbridge/meterbridge/src/meterbridge-0.9.2/src/main.c:256: undefined reference to `jack_activate'
/tmp/yaourt-tmp-calou/aur-meterbridge/meterbridge/src/meterbridge-0.9.2/src/main.c:266: undefined reference to `SDL_WaitEvent'
main.o: In function `make_channel':
/tmp/yaourt-tmp-calou/aur-meterbridge/meterbridge/src/meterbridge-0.9.2/src/main.c:299: undefined reference to `jack_port_register'
/tmp/yaourt-tmp-calou/aur-meterbridge/meterbridge/src/meterbridge-0.9.2/src/main.c:306: undefined reference to `jack_port_register'
/tmp/yaourt-tmp-calou/aur-meterbridge/meterbridge/src/meterbridge-0.9.2/src/main.c:316: undefined reference to `jack_port_by_name'
/tmp/yaourt-tmp-calou/aur-meterbridge/meterbridge/src/meterbridge-0.9.2/src/main.c:321: undefined reference to `jack_port_flags'
/tmp/yaourt-tmp-calou/aur-meterbridge/meterbridge/src/meterbridge-0.9.2/src/main.c:327: undefined reference to `jack_port_get_all_connections'
/tmp/yaourt-tmp-calou/aur-meterbridge/meterbridge/src/meterbridge-0.9.2/src/main.c:329: undefined reference to `jack_disconnect'
/tmp/yaourt-tmp-calou/aur-meterbridge/meterbridge/src/meterbridge-0.9.2/src/main.c:331: undefined reference to `jack_connect'
/tmp/yaourt-tmp-calou/aur-meterbridge/meterbridge/src/meterbridge-0.9.2/src/main.c:341: undefined reference to `jack_connect'
/tmp/yaourt-tmp-calou/aur-meterbridge/meterbridge/src/meterbridge-0.9.2/src/main.c:343: undefined reference to `jack_port_name'
/tmp/yaourt-tmp-calou/aur-meterbridge/meterbridge/src/meterbridge-0.9.2/src/main.c:343: undefined reference to `jack_connect'
main.o: In function `cleanup':
/tmp/yaourt-tmp-calou/aur-meterbridge/meterbridge/src/meterbridge-0.9.2/src/main.c:361: undefined reference to `jack_port_get_all_connections'
/tmp/yaourt-tmp-calou/aur-meterbridge/meterbridge/src/meterbridge-0.9.2/src/main.c:363: undefined reference to `jack_port_get_all_connections'
/tmp/yaourt-tmp-calou/aur-meterbridge/meterbridge/src/meterbridge-0.9.2/src/main.c:367: undefined reference to `jack_port_name'
/tmp/yaourt-tmp-calou/aur-meterbridge/meterbridge/src/meterbridge-0.9.2/src/main.c:367: undefined reference to `jack_disconnect'
/tmp/yaourt-tmp-calou/aur-meterbridge/meterbridge/src/meterbridge-0.9.2/src/main.c:371: undefined reference to `jack_port_name'
/tmp/yaourt-tmp-calou/aur-meterbridge/meterbridge/src/meterbridge-0.9.2/src/main.c:371: undefined reference to `jack_disconnect'
/tmp/yaourt-tmp-calou/aur-meterbridge/meterbridge/src/meterbridge-0.9.2/src/main.c:373: undefined reference to `jack_connect'
/tmp/yaourt-tmp-calou/aur-meterbridge/meterbridge/src/meterbridge-0.9.2/src/main.c:379: undefined reference to `jack_client_close'
/tmp/yaourt-tmp-calou/aur-meterbridge/meterbridge/src/meterbridge-0.9.2/src/main.c:382: undefined reference to `SDL_KillThread'
/tmp/yaourt-tmp-calou/aur-meterbridge/meterbridge/src/meterbridge-0.9.2/src/main.c:383: undefined reference to `SDL_Quit'
linedraw.o: In function `draw_line':
/tmp/yaourt-tmp-calou/aur-meterbridge/meterbridge/src/meterbridge-0.9.2/src/linedraw.c:59: undefined reference to `SDL_LockSurface'
/tmp/yaourt-tmp-calou/aur-meterbridge/meterbridge/src/meterbridge-0.9.2/src/linedraw.c:75: undefined reference to `SDL_UnlockSurface'
linedraw.o: In function `draw_ptr':
/tmp/yaourt-tmp-calou/aur-meterbridge/meterbridge/src/meterbridge-0.9.2/src/linedraw.c:126: undefined reference to `SDL_LockSurface'
/tmp/yaourt-tmp-calou/aur-meterbridge/meterbridge/src/meterbridge-0.9.2/src/linedraw.c:145: undefined reference to `SDL_UnlockSurface'
vu_meters.o: In function `gfx_thread_vu':
/tmp/yaourt-tmp-calou/aur-meterbridge/meterbridge/src/meterbridge-0.9.2/src/vu_meters.c:26: undefined reference to `SDL_MapRGB'
/tmp/yaourt-tmp-calou/aur-meterbridge/meterbridge/src/meterbridge-0.9.2/src/vu_meters.c:27: undefined reference to `SDL_MapRGB'
/tmp/yaourt-tmp-calou/aur-meterbridge/meterbridge/src/meterbridge-0.9.2/src/vu_meters.c:51: undefined reference to `SDL_UpperBlit'
/tmp/yaourt-tmp-calou/aur-meterbridge/meterbridge/src/meterbridge-0.9.2/src/vu_meters.c:54: undefined reference to `SDL_UpperBlit'
/tmp/yaourt-tmp-calou/aur-meterbridge/meterbridge/src/meterbridge-0.9.2/src/vu_meters.c:56: undefined reference to `SDL_UpdateRects'
/tmp/yaourt-tmp-calou/aur-meterbridge/meterbridge/src/meterbridge-0.9.2/src/vu_meters.c:57: undefined reference to `SDL_Delay'
ppm_meters.o: In function `gfx_thread_ppm':
/tmp/yaourt-tmp-calou/aur-meterbridge/meterbridge/src/meterbridge-0.9.2/src/ppm_meters.c:26: undefined reference to `SDL_MapRGB'
/tmp/yaourt-tmp-calou/aur-meterbridge/meterbridge/src/meterbridge-0.9.2/src/ppm_meters.c:27: undefined reference to `SDL_MapRGB'
/tmp/yaourt-tmp-calou/aur-meterbridge/meterbridge/src/meterbridge-0.9.2/src/ppm_meters.c:51: undefined reference to `SDL_UpperBlit'
/tmp/yaourt-tmp-calou/aur-meterbridge/meterbridge/src/meterbridge-0.9.2/src/ppm_meters.c:53: undefined reference to `SDL_UpperBlit'
/tmp/yaourt-tmp-calou/aur-meterbridge/meterbridge/src/meterbridge-0.9.2/src/ppm_meters.c:55: undefined reference to `SDL_UpdateRects'
/tmp/yaourt-tmp-calou/aur-meterbridge/meterbridge/src/meterbridge-0.9.2/src/ppm_meters.c:56: undefined reference to `SDL_Delay'
dpm_meters.o: In function `gfx_thread_dpm':
/tmp/yaourt-tmp-calou/aur-meterbridge/meterbridge/src/meterbridge-0.9.2/src/dpm_meters.c:57: undefined reference to `SDL_MapRGB'
/tmp/yaourt-tmp-calou/aur-meterbridge/meterbridge/src/meterbridge-0.9.2/src/dpm_meters.c:58: undefined reference to `SDL_MapRGB'
/tmp/yaourt-tmp-calou/aur-meterbridge/meterbridge/src/meterbridge-0.9.2/src/dpm_meters.c:59: undefined reference to `SDL_MapRGB'
/tmp/yaourt-tmp-calou/aur-meterbridge/meterbridge/src/meterbridge-0.9.2/src/dpm_meters.c:69: undefined reference to `SDL_FillRect'
/tmp/yaourt-tmp-calou/aur-meterbridge/meterbridge/src/meterbridge-0.9.2/src/dpm_meters.c:73: undefined reference to `SDL_FillRect'
/tmp/yaourt-tmp-calou/aur-meterbridge/meterbridge/src/meterbridge-0.9.2/src/dpm_meters.c:86: undefined reference to `SDL_FillRect'
/tmp/yaourt-tmp-calou/aur-meterbridge/meterbridge/src/meterbridge-0.9.2/src/dpm_meters.c:88: undefined reference to `SDL_UpdateRects'
/tmp/yaourt-tmp-calou/aur-meterbridge/meterbridge/src/meterbridge-0.9.2/src/dpm_meters.c:89: undefined reference to `SDL_Delay'
jf_meters.o: In function `gfx_thread_jf':
/tmp/yaourt-tmp-calou/aur-meterbridge/meterbridge/src/meterbridge-0.9.2/src/jf_meters.c:52: undefined reference to `SDL_MapRGB'
/tmp/yaourt-tmp-calou/aur-meterbridge/meterbridge/src/meterbridge-0.9.2/src/jf_meters.c:53: undefined reference to `SDL_MapRGB'
/tmp/yaourt-tmp-calou/aur-meterbridge/meterbridge/src/meterbridge-0.9.2/src/jf_meters.c:54: undefined reference to `SDL_MapRGB'
/tmp/yaourt-tmp-calou/aur-meterbridge/meterbridge/src/meterbridge-0.9.2/src/jf_meters.c:72: undefined reference to `SDL_FillRect'
/tmp/yaourt-tmp-calou/aur-meterbridge/meterbridge/src/meterbridge-0.9.2/src/jf_meters.c:73: undefined reference to `SDL_UpperBlit'
/tmp/yaourt-tmp-calou/aur-meterbridge/meterbridge/src/meterbridge-0.9.2/src/jf_meters.c:120: undefined reference to `SDL_FillRect'
/tmp/yaourt-tmp-calou/aur-meterbridge/meterbridge/src/meterbridge-0.9.2/src/jf_meters.c:124: undefined reference to `SDL_FillRect'
/tmp/yaourt-tmp-calou/aur-meterbridge/meterbridge/src/meterbridge-0.9.2/src/jf_meters.c:128: undefined reference to `SDL_UpdateRects'
/tmp/yaourt-tmp-calou/aur-meterbridge/meterbridge/src/meterbridge-0.9.2/src/jf_meters.c:129: undefined reference to `SDL_Delay'
scope.o: In function `gfx_thread_scope':
/tmp/yaourt-tmp-calou/aur-meterbridge/meterbridge/src/meterbridge-0.9.2/src/scope.c:22: undefined reference to `SDL_MapRGB'
/tmp/yaourt-tmp-calou/aur-meterbridge/meterbridge/src/meterbridge-0.9.2/src/scope.c:35: undefined reference to `SDL_UpperBlit'
/tmp/yaourt-tmp-calou/aur-meterbridge/meterbridge/src/meterbridge-0.9.2/src/scope.c:60: undefined reference to `SDL_UpdateRects'
/tmp/yaourt-tmp-calou/aur-meterbridge/meterbridge/src/meterbridge-0.9.2/src/scope.c:61: undefined reference to `SDL_Delay'
envelopes.o: In function `process_peak':
/tmp/yaourt-tmp-calou/aur-meterbridge/meterbridge/src/meterbridge-0.9.2/src/envelopes.c:36: undefined reference to `jack_port_get_buffer'
/tmp/yaourt-tmp-calou/aur-meterbridge/meterbridge/src/meterbridge-0.9.2/src/envelopes.c:37: undefined reference to `jack_port_get_buffer'
envelopes.o: In function `process_rms':
/tmp/yaourt-tmp-calou/aur-meterbridge/meterbridge/src/meterbridge-0.9.2/src/envelopes.c:79: undefined reference to `jack_port_get_buffer'
/tmp/yaourt-tmp-calou/aur-meterbridge/meterbridge/src/meterbridge-0.9.2/src/envelopes.c:80: undefined reference to `jack_port_get_buffer'
envelopes.o: In function `process_ring':
/tmp/yaourt-tmp-calou/aur-meterbridge/meterbridge/src/meterbridge-0.9.2/src/envelopes.c:118: undefined reference to `jack_port_get_buffer'
envelopes.o:/tmp/yaourt-tmp-calou/aur-meterbridge/meterbridge/src/meterbridge-0.9.2/src/envelopes.c:119: more undefined references to `jack_port_get_buffer' follow
find_image.o: In function `find_image':
/tmp/yaourt-tmp-calou/aur-meterbridge/meterbridge/src/meterbridge-0.9.2/src/find_image.c:15: undefined reference to `IMG_Load'
/tmp/yaourt-tmp-calou/aur-meterbridge/meterbridge/src/meterbridge-0.9.2/src/find_image.c:19: undefined reference to `IMG_Load'
collect2: ld returned 1 exit status
make[2]: *** [meterbridge] Error 1
make[2]: Leaving directory `/tmp/yaourt-tmp-calou/aur-meterbridge/meterbridge/src/meterbridge-0.9.2/src'
make[1]: *** [all] Error 2
make[1]: Leaving directory `/tmp/yaourt-tmp-calou/aur-meterbridge/meterbridge/src/meterbridge-0.9.2/src'
make: *** [all-recursive] Error 1
==> ERROR: Build Failed.
Aborting...
Error: Makepkg was unable to build meterbridge package.I had it work but.. I don't know what I did
I commented out the line in /etc/makepkg.conf :
#LDFLAGS="-Wl,--hash-style=gnu -Wl,--as-needed"
because it's the origin of the only differences between the config.log resulting of a "manual ./configure" and the makepkg one.
(to tell the truth I copied makepkg.conf, edited it, and used makepkg --config)
now that's weird... but works
Last edited by skai (2009-10-04 09:26:29) -
Hi
I am trying to build vim because the version in the repo lacks a couple of options I need (x11...). The build fails without a clear error message, below are the last lines before the makepkg -s fails:
patching file src/cleanlint.vim
Reversed (or previously applied) patch detected! Skipping patch.
1 out of 1 hunk ignored -- saving rejects to file src/cleanlint.vim.rej
patching file src/diff.c
patching file src/edit.c
patching file src/ex_cmds.c
patching file src/ex_cmds2.c
patching file src/ex_docmd.c
patching file src/proto/ex_cmds.pro
patching file src/proto/spell.pro
patching file src/quickfix.c
patching file src/spell.c
patching file src/structs.h
patching file src/term.h
patching file src/vim.h
patching file src/version.c
==> ERROR: Build Failed.
Aborting...
If the reason is the failed patch is there a way to correct things manually?
This it the (slightly modified) PKGBUILD I am using:
# $Id: PKGBUILD 53395 2009-09-30 20:20:00Z francois $
# Maintainer: tobias [ tobias at archlinux org ]
pkgname=vim
_srcver=7.2
_patchlevel=267
pkgver=${_srcver}.${_patchlevel}
pkgrel=1
pkgdesc='Vi Improved, a highly configurable, improved version of the vi text editor'
arch=(i686 x86_64)
license=('custom:vim')
url="http://www.vim.org"
depends=('gpm' 'coreutils')
makedepends=('wget' 'sed' 'grep' 'gettext' 'perl')
optdepends=('perl: the runtime provides a view useful perl scripts')
backup=(etc/vimrc)
install=${pkgname}.install
# we need the extra-stuff to get all patches applied smoothly
source=(ftp://ftp.vim.org/pub/vim/unix/vim-${_srcver}.tar.bz2 \
ftp://ftp.vim.org/pub/vim/extra/vim-${_srcver}-extra.tar.gz \
ftp://ftp.vim.org/pub/vim/extra/vim-${_srcver}-lang.tar.gz \
fetch_patches.sh fetch_runtime.sh vimrc archlinux.vim)
md5sums=('f0901284b338e448bfd79ccca0041254' '35e04482f07c57221c9a751aaa3b8dac' \
'd8884786979e0e520c112faf2e176f05' '6d7e8d7868e8bfaa9a5880cd9c439320' \
'45c1c3c6aff7de0d8fc2a9d8cd5cec7d' '29125bedc96f2a58c772ee0455a333bc' \
'10353a61aadc3f276692d0e17db1478e')
build()
_versiondir="vim"$(echo ${_srcver} | sed "s/\.//")
# pull in patches from vim.org (or the src cache alternatively)
. ${srcdir}/fetch_patches.sh
. ${srcdir}/fetch_runtime.sh
get_patches || return 1
cd ${srcdir}/${_versiondir}
sed -i 's|^.*\(#define SYS_.*VIMRC_FILE.*"\) .*$|\1|' src/feature.h
sed -i 's|^.*\(#define VIMRC_FILE.*"\) .*$|\1|' src/feature.h
# build party
./configure --prefix=/usr --localstatedir=/var/lib/vim --mandir=/usr/share/man \
--with-compiledby=Arian --with-features=huge \
--enable-gpm --enable-acl --with-x=yes \
--enable-multibyte --enable-cscope \
--enable-perlinterp --enable-pythoninterpr \
--enable-fontset
#--with-global-runtime=/usr/share/vim --with-vim-name=vim \
make || return 1
make VIMRCLOC=/etc DESTDIR=${pkgdir} install
cd ${pkgdir}/usr/bin
rm ex view # provided by (n)vi in core
mv vim vim-normal # we create a vim-symlink on post_install
ln -sf vim-normal vim
# ... make g* related symlinks point directly to the actual binary
ln -sf vim-normal rview
ln -sf vim-normal rvim
ln -sf vim-normal vimdiff
# delete some manpages
find ${pkgdir}/usr/share/man -type d -name 'man1' 2> /dev/null | \
while read mandir; do
cd ${mandir}
rm -f ex.1 view.1 # provided by (n)vi
rm -f evim.1 # this does not make sense in the console version
done
_runtimedir="${pkgdir}/usr/share/vim/${_versiondir}/"
update_runtime
cd ${srcdir}/${_versiondir}
install -Dm644 ${srcdir}/vimrc ${pkgdir}/etc/vimrc
install -Dm644 ${srcdir}/archlinux.vim \
${pkgdir}/usr/share/vim/vimfiles/archlinux.vim
install -dm755 ${pkgdir}/usr/share/licenses/vim
cd ${pkgdir}/usr/share/licenses/vim
ln -s ../../vim/${_versiondir}/doc/uganda.txt license.txt
Any help appreciated.
Last edited by akuschki (2009-10-22 16:43:34)thanks, that solved it. Sorry I didn't try that obvious solution myself, I didn't realise that installing gvim would also change the features of the console vim version. I thought those two packages are independent.
Cheers -
PKIX path building failed Jdeveloper Windows vs Linux
Dear all
I developed an application using Jdeveloper 11.1.1.3.0. This application has a WS client (developed using the Jdeveloper wizard).
The strange part is that in Linux I get a "PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target" error, but in Windows the client works perfectly. The complete error message is below.
I did some research, and I found that I should import some certificates for this to work, but then again in Windows I did nothing like that.
Any idea?
Thanks a lot
com.sun.xml.ws.client.ClientTransportException: HTTP transport error: javax.net.ssl.SSLHandshakeException: sun.security.validator.ValidatorException: PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target
at com.sun.xml.ws.transport.http.client.HttpClientTransport.getOutput(HttpClientTransport.java:138)
at com.sun.xml.ws.transport.http.client.HttpTransportPipe.process(HttpTransportPipe.java:174)
at com.sun.xml.ws.transport.http.client.HttpTransportPipe.processRequest(HttpTransportPipe.java:111)
at com.sun.xml.ws.transport.DeferredTransportPipe.processRequest(DeferredTransportPipe.java:121)
at com.sun.xml.ws.api.pipe.Fiber.__doRun(Fiber.java:604)
at com.sun.xml.ws.api.pipe.Fiber._doRun(Fiber.java:563)
at com.sun.xml.ws.api.pipe.Fiber.doRun(Fiber.java:548)
at com.sun.xml.ws.api.pipe.Fiber.runSync(Fiber.java:445)
at com.sun.xml.ws.client.Stub.process(Stub.java:259)
at com.sun.xml.ws.client.sei.SEIStub.doProcess(SEIStub.java:152)
at com.sun.xml.ws.client.sei.SyncMethodHandler.invoke(SyncMethodHandler.java:115)
at com.sun.xml.ws.client.sei.SyncMethodHandler.invoke(SyncMethodHandler.java:95)
at com.sun.xml.ws.client.sei.SEIStub.invoke(SEIStub.java:135)Being a total novice on the https/SSL configuration side of things, I've finally managed to dig down to the fact that our external partner of course needs to have a certificate installed in order to run https.
I guess the browser did not prompt and ask for acceptance of this, because it was already verified through one of the standard issuers - VeriSign.
So was then able to export the certificate through IE's Properties>Certificate>Details>Copy To File...
Will then try to import this into the correct domain on the WebLogic server.
(A quick test of the web service from the EM console worked fine. Strange then that executing the service through a partner link in bpel does not work, but I guess it may have to do with a local bpel being exposed as a web service in itself, and that security on both sides is called for... maybe... :-) )
-Haakon- -
When I create an EJB Transport Business Service, after selecting the jar that has the EJB 2.1 artefacts (Remote, Home, etc) the oepe plugin fails and can't continue.
As I understand it seems that there is a problem with the classpath of ant build.xml that oepe creates inside folder /tmp/alsbejbtransport/ to compile the bs and generate the wsdl. I checked if tools.jar is in the classpath (in eclipse) and is included, so I can't figure out wich is the problem.
I found this in Oracle, but not helps solve the problem:
BEA-398120
Error: The WSDL for the typed transport endpoint could not be accessed.
Description
There was a problem retrieving the WSDL from the typed transport service endpoint at the time of service registration
Action
Contact technical support
This is the the full stacktrace that shows eclipse.
Generate : Error during generation of the WSDL:
BUILD FAILED
java.lang.NoClassDefFoundError: com/sun/javadoc/Type
at com.bea.util.jam.provider.JamServiceFactoryImpl.createSourceBuilder(JamServiceFactoryImpl.java:205)
at com.bea.util.jam.provider.JamServiceFactoryImpl.createBuilder(JamServiceFactoryImpl.java:158)
at com.bea.util.jam.provider.JamServiceFactoryImpl.createClassLoader(JamServiceFactoryImpl.java:137)
at com.bea.util.jam.provider.JamServiceFactoryImpl.createService(JamServiceFactoryImpl.java:78)
at weblogic.wsee.util.JamUtil.parseSource(JamUtil.java:152)
at weblogic.wsee.tools.anttasks.JwsLoader.loadJClasses(JwsLoader.java:186)
at weblogic.wsee.tools.anttasks.JwsLoader.load(JwsLoader.java:75)
at weblogic.wsee.tools.anttasks.JwsModule.loadWebServices(JwsModule.java:569)
at weblogic.wsee.tools.anttasks.JwsModule.generate(JwsModule.java:369)
at weblogic.wsee.tools.anttasks.JwsModule.build(JwsModule.java:256)
at weblogic.wsee.tools.anttasks.JwscTask.execute(JwscTask.java:184)
at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:288)
at sun.reflect.GeneratedMethodAccessor1.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
at java.lang.reflect.Method.invoke(Method.java:601)
at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:106)
at org.apache.tools.ant.Task.perform(Task.java:348)
at org.apache.tools.ant.Target.execute(Target.java:357)
at org.apache.tools.ant.Target.performTasks(Target.java:385)
at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1337)
at org.apache.tools.ant.Project.executeTarget(Project.java:1306)
at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:41)
at org.apache.tools.ant.Project.executeTargets(Project.java:1189)
at org.apache.tools.ant.Main.runBuild(Main.java:758)
at org.apache.tools.ant.Main.startAnt(Main.java:217)
at org.apache.tools.ant.launch.Launcher.run(Launcher.java:257)
at org.apache.tools.ant.launch.Launcher.main(Launcher.java:104)
Caused by: java.lang.ClassNotFoundException: com.sun.javadoc.Type
at org.apache.tools.ant.AntClassLoader.findClassInComponents(AntClassLoader.java:1400)
at org.apache.tools.ant.AntClassLoader.findClass(AntClassLoader.java:1341)
at org.apache.tools.ant.AntClassLoader.loadClass(AntClassLoader.java:1088)
at java.lang.ClassLoader.loadClass(ClassLoader.java:356)
... 27 more
Total time: 0 seconds
Eclipse Installation details:
*** System properties:
eclipse.application=org.eclipse.ui.ide.workbench
eclipse.buildId=M20110909-1335
eclipse.commands=-os
linux
-ws
gtk
-arch
x86_64
-showsplash
-launcher
{home}/Development/oepe-indigo/eclipse
-name
Eclipse
--launcher.library
{home}/Development/oepe-indigo//plugins/org.eclipse.equinox.launcher.gtk.linux.x86_64_1.1.100.v20110505/eclipse_1407.so
-startup
{home}/Development/oepe-indigo//plugins/org.eclipse.equinox.launcher_1.2.0.v20110502.jar
--launcher.overrideVmargs
-exitdata
1e418010
-vm
/usr/bin/java
eclipse.home.location=file:{home}/Development/oepe-indigo/
eclipse.launcher={home}/Development/oepe-indigo/eclipse
eclipse.launcher.name=Eclipse
[email protected]/../p2/
eclipse.p2.profile=PlatformProfile
eclipse.product=org.eclipse.platform.ide
eclipse.startTime=1374623921455
eclipse.vm=/usr/bin/java
eclipse.vmargs=-Xms256m
-Xmx768m
-XX:MaxPermSize=512m
-Dsun.lang.ClassLoader.allowArraySyntax=true
-Dweblogic.home={home}/Oracle/Middleware/wlserver_10.3
-Dharvester.home={home}/Oracle/Middleware/Oracle_OSB1/harvester
-Dosb.home={home}/Oracle/Middleware/Oracle_OSB1
-Dosgi.bundlefile.limit=750
-Dosgi.nl=en_US
-Dmiddleware.home={home}/Oracle/Middleware
-jar
{home}/Development/oepe-indigo//plugins/org.eclipse.equinox.launcher_1.2.0.v20110502.jar
equinox.use.ds=true
file.encoding=UTF-8
file.encoding.pkg=sun.io
file.separator=/
guice.disable.misplaced.annotation.check=true
harvester.home={home}/Oracle/Middleware/Oracle_OSB1/harvester
http.nonProxyHosts=localhost
java.awt.graphicsenv=sun.awt.X11GraphicsEnvironment
java.awt.printerjob=sun.print.PSPrinterJob
java.class.path={home}/Development/oepe-indigo//plugins/org.eclipse.equinox.launcher_1.2.0.v20110502.jar
java.class.version=50.0
java.endorsed.dirs=/usr/lib/jvm/jdk1.6.0_45/jre/lib/endorsed
java.ext.dirs=/usr/lib/jvm/jdk1.6.0_45/jre/lib/ext:/usr/java/packages/lib/ext
java.home=/usr/lib/jvm/jdk1.6.0_45/jre
java.io.tmpdir=/tmp
java.library.path=/usr/lib/jvm/jdk1.6.0_45/jre/lib/amd64/server:/usr/lib/jvm/jdk1.6.0_45/jre/lib/amd64:/usr/lib/jvm/jdk1.6.0_45/jre/../lib/amd64:/usr/java/packages/lib/amd64:/usr/lib64:/lib64:/lib:/usr/lib
java.protocol.handler.pkgs=null|com.bea.wli.sb.resources.url|com.bea.wli.sb.resources.jca.upgrade.url|weblogic.utils|weblogic.utils|weblogic.utils|weblogic.net|weblogic.net
java.runtime.name=Java(TM) SE Runtime Environment
java.runtime.version=1.6.0_45-b06
java.specification.name=Java Platform API Specification
java.specification.vendor=Sun Microsystems Inc.
java.specification.version=1.6
java.vendor=Sun Microsystems Inc.
java.vendor.url=http://java.sun.com/
java.vendor.url.bug=http://java.sun.com/cgi-bin/bugreport.cgi
java.version=1.6.0_45
java.vm.info=mixed mode
java.vm.name=Java HotSpot(TM) 64-Bit Server VM
java.vm.specification.name=Java Virtual Machine Specification
java.vm.specification.vendor=Sun Microsystems Inc.
java.vm.specification.version=1.0
java.vm.vendor=Sun Microsystems Inc.
java.vm.version=20.45-b01
javax.rmi.CORBA.PortableRemoteObjectClass=weblogic.iiop.PortableRemoteObjectDelegateImpl
javax.rmi.CORBA.UtilClass=weblogic.iiop.UtilDelegateImpl
jna.platform.library.path=/usr/lib/x86_64-linux-gnu:/lib/x86_64-linux-gnu:/lib64:/usr/lib:/lib
line.separator=
middleware.home={home}/Oracle/Middleware
oracle.eclipse.tools.weblogic.ui.isWebLogicServer=true
org.apache.commons.logging.Log=org.apache.commons.logging.impl.NoOpLog
org.eclipse.equinox.launcher.splash.location={home}/Development/oepe-indigo/plugins/org.eclipse.platform_3.7.1.v201109091335/splash.bmp
org.eclipse.equinox.simpleconfigurator.configUrl=file:org.eclipse.equinox.simpleconfigurator/bundles.info
org.eclipse.m2e.log.dir={home}/workspace/pragma/.metadata/.plugins/org.eclipse.m2e.logback.configuration
org.eclipse.update.reconcile=false
org.omg.CORBA.ORBClass=weblogic.corba.orb.ORB
org.omg.CORBA.ORBSingletonClass=weblogic.corba.orb.ORB
org.osgi.framework.executionenvironment=OSGi/Minimum-1.0,OSGi/Minimum-1.1,OSGi/Minimum-1.2,JRE-1.1,J2SE-1.2,J2SE-1.3,J2SE-1.4,J2SE-1.5,JavaSE-1.6
org.osgi.framework.language=en
org.osgi.framework.os.name=Linux
org.osgi.framework.os.version=3.8.0
org.osgi.framework.processor=x86-64
org.osgi.framework.system.capabilities=osgi.ee; osgi.ee="OSGi/Minimum"; version:List<Version>="1.0, 1.1, 1.2",osgi.ee; osgi.ee="JavaSE"; version:List<Version>="1.0, 1.1, 1.2, 1.3, 1.4, 1.5, 1.6"
org.osgi.framework.system.packages=javax.accessibility,javax.activation,javax.activity,javax.annotation,javax.annotation.processing,javax.crypto,javax.crypto.interfaces,javax.crypto.spec,javax.imageio,javax.imageio.event,javax.imageio.metadata,javax.imageio.plugins.bmp,javax.imageio.plugins.jpeg,javax.imageio.spi,javax.imageio.stream,javax.jws,javax.jws.soap,javax.lang.model,javax.lang.model.element,javax.lang.model.type,javax.lang.model.util,javax.management,javax.management.loading,javax.management.modelmbean,javax.management.monitor,javax.management.openmbean,javax.management.relation,javax.management.remote,javax.management.remote.rmi,javax.management.timer,javax.naming,javax.naming.directory,javax.naming.event,javax.naming.ldap,javax.naming.spi,javax.net,javax.net.ssl,javax.print,javax.print.attribute,javax.print.attribute.standard,javax.print.event,javax.rmi,javax.rmi.CORBA,javax.rmi.ssl,javax.script,javax.security.auth,javax.security.auth.callback,javax.security.auth.kerberos,javax.security.auth.login,javax.security.auth.spi,javax.security.auth.x500,javax.security.cert,javax.security.sasl,javax.sound.midi,javax.sound.midi.spi,javax.sound.sampled,javax.sound.sampled.spi,javax.sql,javax.sql.rowset,javax.sql.rowset.serial,javax.sql.rowset.spi,javax.swing,javax.swing.border,javax.swing.colorchooser,javax.swing.event,javax.swing.filechooser,javax.swing.plaf,javax.swing.plaf.basic,javax.swing.plaf.metal,javax.swing.plaf.multi,javax.swing.plaf.synth,javax.swing.table,javax.swing.text,javax.swing.text.html,javax.swing.text.html.parser,javax.swing.text.rtf,javax.swing.tree,javax.swing.undo,javax.tools,javax.transaction,javax.transaction.xa,javax.xml,javax.xml.bind,javax.xml.bind.annotation,javax.xml.bind.annotation.adapters,javax.xml.bind.attachment,javax.xml.bind.helpers,javax.xml.bind.util,javax.xml.crypto,javax.xml.crypto.dom,javax.xml.crypto.dsig,javax.xml.crypto.dsig.dom,javax.xml.crypto.dsig.keyinfo,javax.xml.crypto.dsig.spec,javax.xml.datatype,javax.xml.namespace,javax.xml.parsers,javax.xml.soap,javax.xml.stream,javax.xml.stream.events,javax.xml.stream.util,javax.xml.transform,javax.xml.transform.dom,javax.xml.transform.sax,javax.xml.transform.stax,javax.xml.transform.stream,javax.xml.validation,javax.xml.ws,javax.xml.ws.handler,javax.xml.ws.handler.soap,javax.xml.ws.http,javax.xml.ws.soap,javax.xml.ws.spi,javax.xml.ws.wsaddressing,javax.xml.xpath,org.ietf.jgss,org.omg.CORBA,org.omg.CORBA_2_3,org.omg.CORBA_2_3.portable,org.omg.CORBA.DynAnyPackage,org.omg.CORBA.ORBPackage,org.omg.CORBA.portable,org.omg.CORBA.TypeCodePackage,org.omg.CosNaming,org.omg.CosNaming.NamingContextExtPackage,org.omg.CosNaming.NamingContextPackage,org.omg.Dynamic,org.omg.DynamicAny,org.omg.DynamicAny.DynAnyFactoryPackage,org.omg.DynamicAny.DynAnyPackage,org.omg.IOP,org.omg.IOP.CodecFactoryPackage,org.omg.IOP.CodecPackage,org.omg.Messaging,org.omg.PortableInterceptor,org.omg.PortableInterceptor.ORBInitInfoPackage,org.omg.PortableServer,org.omg.PortableServer.CurrentPackage,org.omg.PortableServer.POAManagerPackage,org.omg.PortableServer.POAPackage,org.omg.PortableServer.portable,org.omg.PortableServer.ServantLocatorPackage,org.omg.SendingContext,org.omg.stub.java.rmi,org.w3c.dom,org.w3c.dom.bootstrap,org.w3c.dom.css,org.w3c.dom.events,org.w3c.dom.html,org.w3c.dom.ls,org.w3c.dom.ranges,org.w3c.dom.stylesheets,org.w3c.dom.traversal,org.w3c.dom.views,org.w3c.dom.xpath,org.xml.sax,org.xml.sax.ext,org.xml.sax.helpers
org.osgi.framework.uuid=901615cd-f3f3-0012-11b6-a3bca4d97ac1
org.osgi.framework.vendor=Eclipse
org.osgi.framework.version=1.6.0
org.osgi.supports.framework.extension=true
org.osgi.supports.framework.fragment=true
org.osgi.supports.framework.requirebundle=true
os.arch=amd64
os.name=Linux
os.version=3.8.0-26-generic
osb.home={home}/Oracle/Middleware/Oracle_OSB1
osgi.arch=x86_64
osgi.bundlefile.limit=750
osgi.bundles=reference:file:javax.transaction_1.1.1.v201105210645.jar,reference:file:org.eclipse.equinox.simpleconfigurator_1.0.200.v20110502-1955.jar@1:start
osgi.bundles.defaultStartLevel=4
osgi.bundlestore={home}/Development/oepe-indigo/configuration/org.eclipse.osgi/bundles
osgi.configuration.area=file:{home}/Development/oepe-indigo/configuration/
osgi.framework=file:{home}/Development/oepe-indigo/plugins/org.eclipse.osgi_3.7.1.R37x_v20110808-1106.jar
osgi.framework.extensions=reference:file:javax.transaction_1.1.1.v201105210645.jar
osgi.framework.shape=jar
osgi.framework.version=3.7.1.R37x_v20110808-1106
osgi.frameworkClassPath=., file:{home}/Development/oepe-indigo/plugins/javax.transaction_1.1.1.v201105210645.jar
osgi.install.area=file:{home}/Development/oepe-indigo/
osgi.instance.area=file:{home}/workspace/pragma/
osgi.instance.area.default=file:{home}/workspace/
osgi.logfile={home}/workspace/pragma/.metadata/.log
osgi.manifest.cache={home}/Development/oepe-indigo/configuration/org.eclipse.osgi/manifests
osgi.nl=en_US
osgi.nl.user=en_US
osgi.os=linux
osgi.splashLocation={home}/Development/oepe-indigo/plugins/org.eclipse.platform_3.7.1.v201109091335/splash.bmp
osgi.splashPath=platform:/base/plugins/org.eclipse.platform
osgi.syspath={home}/Development/oepe-indigo/plugins
osgi.tracefile={home}/workspace/pragma/.metadata/trace.log
osgi.ws=gtk
path.separator=:
securerandom.source=file:/dev/./urandom
socksNonProxyHost=localhost
sun.arch.data.model=64
sun.boot.class.path=/usr/lib/jvm/jdk1.6.0_45/jre/lib/resources.jar:/usr/lib/jvm/jdk1.6.0_45/jre/lib/rt.jar:/usr/lib/jvm/jdk1.6.0_45/jre/lib/sunrsasign.jar:/usr/lib/jvm/jdk1.6.0_45/jre/lib/jsse.jar:/usr/lib/jvm/jdk1.6.0_45/jre/lib/jce.jar:/usr/lib/jvm/jdk1.6.0_45/jre/lib/charsets.jar:/usr/lib/jvm/jdk1.6.0_45/jre/lib/modules/jdk.boot.jar:/usr/lib/jvm/jdk1.6.0_45/jre/classes
sun.boot.library.path=/usr/lib/jvm/jdk1.6.0_45/jre/lib/amd64
sun.cpu.endian=little
sun.cpu.isalist=
sun.desktop=gnome
sun.io.unicode.encoding=UnicodeLittle
sun.java.command={home}/Development/oepe-indigo//plugins/org.eclipse.equinox.launcher_1.2.0.v20110502.jar -os linux -ws gtk -arch x86_64 -showsplash -launcher {home}/Development/oepe-indigo/eclipse -name Eclipse --launcher.library {home}/Development/oepe-indigo//plugins/org.eclipse.equinox.launcher.gtk.linux.x86_64_1.1.100.v20110505/eclipse_1407.so -startup {home}/Development/oepe-indigo//plugins/org.eclipse.equinox.launcher_1.2.0.v20110502.jar --launcher.overrideVmargs -exitdata 1e418010 -vm /usr/bin/java -vmargs -Xms256m -Xmx768m -XX:MaxPermSize=512m -Dsun.lang.ClassLoader.allowArraySyntax=true -Dweblogic.home={home}/Oracle/Middleware/wlserver_10.3 -Dharvester.home={home}/Oracle/Middleware/Oracle_OSB1/harvester -Dosb.home={home}/Oracle/Middleware/Oracle_OSB1 -Dosgi.bundlefile.limit=750 -Dosgi.nl=en_US -Dmiddleware.home={home}/Oracle/Middleware -jar {home}/Development/oepe-indigo//plugins/org.eclipse.equinox.launcher_1.2.0.v20110502.jar
sun.java.launcher=SUN_STANDARD
sun.jnu.encoding=UTF-8
sun.lang.ClassLoader.allowArraySyntax=true
sun.management.compiler=HotSpot 64-Bit Tiered Compilers
sun.os.patch.level=unknown
svnkit.http.methods=Basic
svnkit.library.gnome-keyring.enabled=false
user.country=AR
user.dir={home}/Development/oepe-indigo
user.home={home}
user.language=es
user.name={username}
user.timezone=America/Argentina/Buenos_Aires
weblogic.home={home}/Oracle/Middleware/wlserver_10.3
Thanks!!run this one in command prompt and then convert the applet using converter tool
JC_HOME = C:\java_card_kit-2_2_2\bin\
set CLASSES=%JCHOME%\lib\apduio.jar;%JC_HOME%\lib\apdutool.jar;%JC_HOME%\lib\jcwde.jar;%JC_HOME%\lib\converter.jar;%JC_HOME%\lib\scriptgen.jar;%JC_HOME%\lib\offcardverifier.jar;%JC_HOME%\lib\api.jar;%JC_HOME%\lib\installer.jar;%JC_HOME%\lib\capdump.jar;
D:\NareshPalle\jcardRE\Smart\src>java -classpath %_CLASSES% com.sun.javacard.con
verter.Converter -out EXP JCA CAP -exportpath .\exp -applet 0x0a:0x00:0x00:0x00:0x0e:0x01:0x02:
0x03:0x04:0x05:0x06 PackageName appletName 0x01:0x02:0x03:0x04:0x05:0x0
6:0x07:0x08 1.0
or
go to following directory and run the converter tool in command prompt
step 1: cd C:\java_card_kit-2_2_2\bin\
then run this command under the above directory
step 2:converter -classdir E:\Pathof Your applet class file -out EXP JCA CAP -exportpath E:\path of exp files folder -applet AID PackageName AppletName PackAID major.minor no
For more doubts mail me....
*[removed by moderator]*
Thanks and Regards
NareshPalle
Edited by: EJP on 31/03/2012 20:09: removed your email address. Unless you like spam and unless you think these forums are provided for your personal benefit only, posting an email address here serves no useful purpose whatsoever. -
Build Fails for Alsaplayer in ABS
Hi all,
I couldn't get alsaplayer to run in GUI mode, but I found this thread that had the answer: http://bbs.archlinux.org/viewtopic.php?id=42168. So I followed the ABS wiki's directions for setting up ABS and I tried to run for alsaplayer (with the one line change in the PKGBUILD) , but the build fails after configuring. Here's the full console output:
aclocal.m4:14: error: this file was generated for autoconf 2.61.
You have another version of autoconf. If you want to use that,
you should regenerate the build system entirely.
aclocal.m4:14: the top level
autom4te: /usr/bin/m4 failed with exit status: 63
checking for a BSD-compatible install... /bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether to enable maintainer-specific portions of Makefiles... no
checking for gcc... gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking for style of include used by make... GNU
checking dependency style of gcc... gcc3
checking how to run the C preprocessor... gcc -E
checking for g++... g++
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking dependency style of g++... gcc3
checking for a BSD-compatible install... /bin/install -c
checking whether NLS is requested... yes
checking for msgfmt... /usr/bin/msgfmt
checking for gmsgfmt... /usr/bin/msgfmt
checking for xgettext... /usr/bin/xgettext
checking for msgmerge... /usr/bin/msgmerge
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking whether we are using the GNU C Library 2 or newer... yes
checking for ranlib... ranlib
checking for simple visibility declarations... yes
checking for inline... inline
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for size_t... yes
checking for stdint.h... yes
checking for working alloca.h... yes
checking for alloca... yes
checking for stdlib.h... (cached) yes
checking for unistd.h... (cached) yes
checking for getpagesize... yes
checking for working mmap... yes
checking whether integer division by zero raises SIGFPE... yes
checking for inttypes.h... yes
checking for unsigned long long int... yes
checking for inttypes.h... (cached) yes
checking whether the inttypes.h PRIxNN macros are broken... no
checking for ld used by GCC... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for shared library run path origin... done
checking whether imported symbols can be declared weak... yes
checking pthread.h usability... yes
checking pthread.h presence... yes
checking for pthread.h... yes
checking for pthread_kill in -lpthread... yes
checking for pthread_rwlock_t... yes
checking for multithread API to use... posix
checking argz.h usability... yes
checking argz.h presence... yes
checking for argz.h... yes
checking for inttypes.h... (cached) yes
checking limits.h usability... yes
checking limits.h presence... yes
checking for limits.h... yes
checking for unistd.h... (cached) yes
checking sys/param.h usability... yes
checking sys/param.h presence... yes
checking for sys/param.h... yes
checking for getcwd... yes
checking for getegid... yes
checking for geteuid... yes
checking for getgid... yes
checking for getuid... yes
checking for mempcpy... yes
checking for munmap... yes
checking for stpcpy... yes
checking for strcasecmp... yes
checking for strdup... yes
checking for strtoul... yes
checking for tsearch... yes
checking for argz_count... yes
checking for argz_stringify... yes
checking for argz_next... yes
checking for __fsetlocking... yes
checking whether feof_unlocked is declared... yes
checking whether fgets_unlocked is declared... yes
checking for iconv... yes
checking for iconv declaration...
extern size_t iconv (iconv_t cd, char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft);
checking for NL_LOCALE_NAME macro... yes
checking for bison... bison
checking version of bison... 2.3, ok
checking for long long int... yes
checking for long double... yes
checking for wchar_t... yes
checking for wint_t... yes
checking for intmax_t... yes
checking whether printf() supports POSIX/XSI format strings... yes
checking whether we are using the GNU C Library 2.1 or newer... yes
checking for stdint.h... (cached) yes
checking for SIZE_MAX... yes
checking for stdint.h... (cached) yes
checking for CFPreferencesCopyAppValue... no
checking for CFLocaleCopyCurrent... no
checking for ptrdiff_t... yes
checking stddef.h usability... yes
checking stddef.h presence... yes
checking for stddef.h... yes
checking for stdlib.h... (cached) yes
checking for string.h... (cached) yes
checking for asprintf... yes
checking for fwprintf... yes
checking for putenv... yes
checking for setenv... yes
checking for setlocale... yes
checking for snprintf... yes
checking for wcslen... yes
checking whether _snprintf is declared... no
checking whether _snwprintf is declared... no
checking whether getc_unlocked is declared... yes
checking for nl_langinfo and CODESET... yes
checking for LC_MESSAGES... yes
checking for CFPreferencesCopyAppValue... (cached) no
checking for CFLocaleCopyCurrent... (cached) no
checking whether included gettext is requested... no
checking for GNU gettext in libc... yes
checking whether to use NLS... yes
checking where the gettext function comes from... libc
checking whether ln -s works... yes
checking for a sed that does not truncate output... /bin/sed
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for /usr/bin/ld option to reload object files... -r
checking for BSD-compatible nm... /usr/bin/nm -B
checking how to recognize dependent libraries... pass_all
checking dlfcn.h usability... yes
checking dlfcn.h presence... yes
checking for dlfcn.h... yes
checking how to run the C++ preprocessor... g++ -E
checking for g77... no
checking for xlf... no
checking for f77... no
checking for frt... no
checking for pgf77... no
checking for cf77... no
checking for fort77... no
checking for fl32... no
checking for af77... no
checking for xlf90... no
checking for f90... no
checking for pgf90... no
checking for pghpf... no
checking for epcf90... no
checking for gfortran... gfortran
checking whether we are using the GNU Fortran 77 compiler... yes
checking whether gfortran accepts -g... yes
checking the maximum length of command line arguments... 1572864
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for objdir... .libs
checking for ar... ar
checking for ranlib... (cached) ranlib
checking for strip... strip
checking for correct ltmain.sh version... yes
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC
checking if gcc PIC flag -fPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... no
configure: creating libtool
appending configuration tag "CXX" to libtool
checking for ld used by g++... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes
checking for g++ option to produce PIC... -fPIC
checking if g++ PIC flag -fPIC works... yes
checking if g++ static flag -static works... yes
checking if g++ supports -c -o file.o... yes
checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
appending configuration tag "F77" to libtool
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... no
checking for gfortran option to produce PIC... -fPIC
checking if gfortran PIC flag -fPIC works... yes
checking if gfortran static flag -static works... yes
checking if gfortran supports -c -o file.o... yes
checking whether the gfortran linker (/usr/bin/ld) supports shared libraries... yes
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether gcc and cc understand -c and -o together... yes
checking whether make sets $(MAKE)... (cached) yes
checking for libmikmod-config... /usr/bin/libmikmod-config
checking for libmikmod - version >= 3.1.7... yes, `/usr/bin/libmikmod-config --version`
checking for Ogg... yes
checking for Vorbis... yes
checking for audiofile-config... /usr/bin/audiofile-config
checking for Audio File Library - version >= 0.1.7... yes
checking for afOpenFile in -laudiofile... yes
checking for ANSI C header files... (cached) yes
*** Disabling OpenGL plugins per user request ***
checking for FLAC__stream_decoder_new in -lFLAC... yes
checking for FLAC__stream_decoder_init_ogg_stream in -lFLAC... yes
checking for mad_stream_init in -lmad... yes
checking for id3_file_open in -lid3tag... yes
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking for JACK... yes
checking for xosd_create in -lxosd... no
checking for GLIB2... yes
checking for GTK2... yes
checking for SNDFILE... yes
checking for pthread_create in -lpthread... yes
checking for ANSI C header files... (cached) yes
checking for dirent.h that defines DIR... yes
checking for library containing opendir... none required
checking fcntl.h usability... yes
checking fcntl.h presence... yes
checking for fcntl.h... yes
checking malloc.h usability... yes
checking malloc.h presence... yes
checking for malloc.h... yes
checking sys/ioctl.h usability... yes
checking sys/ioctl.h presence... yes
checking for sys/ioctl.h... yes
checking sys/time.h usability... yes
checking sys/time.h presence... yes
checking for sys/time.h... yes
checking for unistd.h... (cached) yes
checking linux/cdrom.h usability... yes
checking linux/cdrom.h presence... yes
checking for linux/cdrom.h... yes
checking sys/soundcard.h usability... yes
checking sys/soundcard.h presence... yes
checking for sys/soundcard.h... yes
checking sys/audioio.h usability... no
checking sys/audioio.h presence... no
checking for sys/audioio.h... no
checking audio/audiolib.h usability... no
checking audio/audiolib.h presence... no
checking for audio/audiolib.h... no
checking libintl.h usability... yes
checking libintl.h presence... yes
checking for libintl.h... yes
checking mad.h usability... yes
checking mad.h presence... yes
checking for mad.h... yes
checking id3tag.h usability... yes
checking id3tag.h presence... yes
checking for id3tag.h... yes
checking FLAC/stream_decoder.h usability... yes
checking FLAC/stream_decoder.h presence... yes
checking for FLAC/stream_decoder.h... yes
checking OggFLAC/stream_decoder.h usability... no
checking OggFLAC/stream_decoder.h presence... no
checking for OggFLAC/stream_decoder.h... no
checking for alsa version... found latest
checking for esd-config... /usr/bin/esd-config
checking for ESD - version >= 0.2.4... yes
checking for alOpenPort in -laudio... no
checking for AuStartFlow in -laudio... no
checking for doxygen... false
configure: WARNING: *** doxygen not found, docs will not be built
checking machine architecture... i686
checking for gcc optimization flags... -O2 -fexpensive-optimizations -funroll-loops -finline-functions -ffast-math -Wall
checking for an ANSI C-conforming const... yes
checking for size_t... (cached) yes
checking whether gcc needs -traditional... no
checking for working memcmp... yes
checking for stdlib.h... (cached) yes
checking for unistd.h... (cached) yes
checking for getpagesize... (cached) yes
checking for working mmap... (cached) yes
checking for madvise... yes
checking for strdup... (cached) yes
checking for strstr... yes
configure: creating ./config.status
config.status: creating intl/Makefile
config.status: creating po/Makefile.in
config.status: creating Makefile
config.status: creating alsaplayer.1
config.status: creating alsaplayer.pc
config.status: creating alsaplayer.spec
config.status: creating app/Makefile
config.status: creating interface/Makefile
config.status: creating interface/gtk2/Makefile
config.status: creating interface/gtk2/pixmaps/Makefile
config.status: creating interface/text/Makefile
config.status: creating interface/daemon/Makefile
config.status: creating interface/xosd/Makefile
config.status: creating scopes2/Makefile
config.status: creating scopes2/monoscope/Makefile
config.status: creating scopes2/levelmeter/Makefile
config.status: creating scopes2/spacescope/Makefile
config.status: creating scopes2/logbarfft/Makefile
config.status: creating scopes2/synaescope/Makefile
config.status: creating scopes2/blurscope/Makefile
config.status: creating scopes2/opengl_spectrum/Makefile
config.status: creating output/Makefile
config.status: creating output/alsa-0.5.x/Makefile
config.status: creating output/alsa-final/Makefile
config.status: creating output/jack/Makefile
config.status: creating output/oss/Makefile
config.status: creating output/esound/Makefile
config.status: creating output/sgi/Makefile
config.status: creating output/sparc/Makefile
config.status: creating output/null/Makefile
config.status: creating output/nas/Makefile
config.status: creating input/Makefile
config.status: creating input/mad/Makefile
config.status: creating input/cdda/Makefile
config.status: creating input/mikmod/Makefile
config.status: creating input/wav/Makefile
config.status: creating input/vorbis/Makefile
config.status: creating input/audiofile/Makefile
config.status: creating input/flac/Makefile
config.status: creating input/sndfile/Makefile
config.status: creating reader/Makefile
config.status: creating reader/file/Makefile
config.status: creating reader/http/Makefile
config.status: creating alsaplayer/Makefile
config.status: creating libalsaplayer/Makefile
config.status: creating extra/Makefile
config.status: creating examples/Makefile
config.status: creating m4/Makefile
config.status: creating docs/Makefile
config.status: creating docs/reference.doxygen
config.status: creating config.h
config.status: config.h is unchanged
config.status: executing depfiles commands
config.status: executing po-directories commands
config.status: creating po/POTFILES
config.status: creating po/Makefile
Configuration:
Install path: /usr
Use libmad shared library: yes
Enable libid3tag support: yes
Build GTK2 interface: yes
Build XOSD interface: no
Build OpenGL based visual plugins: no
Build alsa 0.5.x output plugin: no
Build alsa 0.9.x output plugin: yes
Build jack output plugin: yes
Build oss output plugin: yes
Build esound output plugin: yes
Build sparc output plugin: no
Build sgi output plugin: no
Build nas output plugin: no
Build vorbis input plugin: yes
Build cdda input plugin: yes
Build mikmod input plugin: yes
Build audiofile input plugin: yes
Build FLAC input plugin: yes
Included OggFLAC input plugin: yes
Separated OggFLAC input plugin: no
Build sndfile input plugin: yes
Now type 'make' to build AlsaPlayer.
make all-recursive
make[1]: Entering directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80'
Making all in intl
make[2]: Entering directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80/intl'
make[2]: Nothing to be done for `all'.
make[2]: Leaving directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80/intl'
Making all in po
make[2]: Entering directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80/po'
make[2]: Nothing to be done for `all'.
make[2]: Leaving directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80/po'
Making all in interface
make[2]: Entering directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80/interface'
Making all in gtk2
make[3]: Entering directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80/interface/gtk2'
Making all in pixmaps
make[4]: Entering directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80/interface/gtk2/pixmaps'
make[4]: Nothing to be done for `all'.
make[4]: Leaving directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80/interface/gtk2/pixmaps'
make[4]: Entering directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80/interface/gtk2'
make[4]: Nothing to be done for `all-am'.
make[4]: Leaving directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80/interface/gtk2'
make[3]: Leaving directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80/interface/gtk2'
Making all in text
make[3]: Entering directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80/interface/text'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80/interface/text'
Making all in daemon
make[3]: Entering directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80/interface/daemon'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80/interface/daemon'
Making all in xosd
make[3]: Entering directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80/interface/xosd'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80/interface/xosd'
make[3]: Entering directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80/interface'
make[3]: Nothing to be done for `all-am'.
make[3]: Leaving directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80/interface'
make[2]: Leaving directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80/interface'
Making all in output
make[2]: Entering directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80/output'
Making all in alsa-0.5.x
make[3]: Entering directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80/output/alsa-0.5.x'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80/output/alsa-0.5.x'
Making all in alsa-final
make[3]: Entering directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80/output/alsa-final'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80/output/alsa-final'
Making all in oss
make[3]: Entering directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80/output/oss'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80/output/oss'
Making all in esound
make[3]: Entering directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80/output/esound'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80/output/esound'
Making all in sgi
make[3]: Entering directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80/output/sgi'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80/output/sgi'
Making all in sparc
make[3]: Entering directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80/output/sparc'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80/output/sparc'
Making all in nas
make[3]: Entering directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80/output/nas'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80/output/nas'
Making all in null
make[3]: Entering directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80/output/null'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80/output/null'
Making all in jack
make[3]: Entering directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80/output/jack'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80/output/jack'
make[3]: Entering directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80/output'
make[3]: Nothing to be done for `all-am'.
make[3]: Leaving directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80/output'
make[2]: Leaving directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80/output'
Making all in input
make[2]: Entering directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80/input'
Making all in cdda
make[3]: Entering directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80/input/cdda'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80/input/cdda'
Making all in audiofile
make[3]: Entering directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80/input/audiofile'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80/input/audiofile'
Making all in mikmod
make[3]: Entering directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80/input/mikmod'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80/input/mikmod'
Making all in wav
make[3]: Entering directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80/input/wav'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80/input/wav'
Making all in vorbis
make[3]: Entering directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80/input/vorbis'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80/input/vorbis'
Making all in mad
make[3]: Entering directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80/input/mad'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80/input/mad'
Making all in flac
make[3]: Entering directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80/input/flac'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80/input/flac'
Making all in sndfile
make[3]: Entering directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80/input/sndfile'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80/input/sndfile'
make[3]: Entering directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80/input'
make[3]: Nothing to be done for `all-am'.
make[3]: Leaving directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80/input'
make[2]: Leaving directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80/input'
Making all in app
make[2]: Entering directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80/app'
g++ -DHAVE_CONFIG_H -I. -I.. -I../alsaplayer -I../libalsaplayer -DLOCALEDIR=\"/usr/share/locale\" -D_REENTRANT -DADDON_DIR=\"/usr/lib/alsaplayer\" -O2 -fexpensive-optimizations -funroll-loops -finline-functions -ffast-math -Wall -march=i686 -mtune=generic -O2 -pipe -march=i686 -mtune=generic -O2 -pipe -MT alsaplayer-ControlSocket.o -MD -MP -MF .deps/alsaplayer-ControlSocket.Tpo -c -o alsaplayer-ControlSocket.o `test -f 'ControlSocket.cpp' || echo './'`ControlSocket.cpp
ControlSocket.cpp: In function 'void socket_looper(void*)':
ControlSocket.cpp:150: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:151: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:154: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:158: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:161: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:164: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:167: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:170: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:173: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:176: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:184: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:188: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:192: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:196: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:201: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:206: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:209: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:212: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:214: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:219: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:223: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:229: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:235: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:239: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:243: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:245: error: 'PATH_MAX' was not declared in this scope
ControlSocket.cpp:246: error: 'save_path' was not declared in this scope
ControlSocket.cpp:248: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:257: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:261: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:267: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:268: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:272: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:273: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:277: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:278: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:282: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:283: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:286: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:292: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:298: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:319: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:322: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:323: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:326: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:332: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:337: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:339: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:345: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:346: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:351: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:353: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:359: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:360: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:366: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:367: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:373: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:374: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:380: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:381: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:387: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:388: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:394: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:395: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:400: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:401: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:407: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:408: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:414: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:415: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:421: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:422: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:428: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:429: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:435: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:436: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:441: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:444: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:446: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:451: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:452: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:457: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:471: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:475: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:486: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:489: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:490: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:495: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:496: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:501: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:502: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:507: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:508: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:513: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:515: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:520: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:521: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:524: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:526: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:527: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:530: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:535: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:537: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:539: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:542: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:547: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:550: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:553: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:558: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:561: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:564: warning: deprecated conversion from string constant to 'char*'
make[2]: *** [alsaplayer-ControlSocket.o] Error 1
make[2]: Leaving directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80/app'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80'
make: *** [all] Error 2
I figure it's those 2 errors in the middle of make that are holding it up, but I don't have a clue how to fix it.
thanks,
progrockIf you know how to write a patch or feel like learning, put one together, file a bug report, and submit the patch with it. If you don't feel like writing a patch, just submit a bug report that says that app/ContolSocket.cpp needs "include <climits>" to build. Either way is good.
Last edited by skottish (2008-08-08 04:03:17)
Maybe you are looking for
-
BOM Explosion in Subcontracting Purchase Order (Item Category L)
Hello everybody, can u tell me which alternative of a BOM will be choosen during the BOM Explosion in a Subcontracting PO (Item Cat. L) - or where the corresponding customizing or master data settings can be done? many thanks, Gregor
-
Spanning-tree link-type shared
Hi, i 've this problem. My PC must boot OS (windows) from network (Server sends Operating System by PC's mac-address) PC needs a ip-address within 5-10 seconds. I try it using hub and PC loads correctly OS and works properly. I try on my network (wit
-
Making actionscript global & portable
Forgive me if this is the improper forum for this question. I am certain that if it is, someone will kindly re-direct me. What can I say, I'm sort of a noob. Anyway, I have a single frame .swf file that is mostly actionscript that is triggered by a s
-
A few of my playlists are gone on my Mac with the new update does anyone know how to get them back?
a few of my playlists are gone on my Mac itunes library with the new update does anyone know how to get them back? I'm so frustrated! Any ideas?
-
Troubleshooting UNAV package installs during SCCM TS
We use driver packages filtered by WMI to install drivers and we have never had any luck installing the UNAV driver. So we are trying to install the UNAV setup.exe during the post windows install portion of the Task Sequence It's a standard program