VS2013 MSBuild process not cleaning up after itself

I'm sure that this has only happened since i started using VS2013.  Progressively, the task list is filling up with MSBuild processes (along with conhost.exe - one for each as far as I can tell).
It looks like it starts off (after a machine reboot) with 7 MSBuilds - I'm guessing one per core?  But is building up quickly (after it gets crowded enough, it stops building).
Is this a known bug with VS2013?  Is there a workaround for it?

Hi,
Thank you for your feedback.
Please accept my apology for this delayed reply because of the weekend here.
Since I have not Win 7 involved, I could not reproduce this issue completely.
I have tried to build one sample application from the Visual Studio 2013 Pro Command Prompt on Win 8.1, 64-Bit. 
The first time when I built the solution, I could see 3 MSBuild tasks displayed on the following  screenshot:
As for the second time to build it, the MSBuild tasks lasted only for seconds and then queued  themselves out quickly.
So I don't think this is the problem of  Visual Studio 2013 Pro.
Please check if you need to install some SDKs for this scenario or consider updating the Windows system to see if this issue could be fixed.
Best Regards,
Jane.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Similar Messages

  • WebLogic not cleaning up after itself?

    Hi,
    I've only recently started using JDeveloper 11g (11.1.2.0.38.60.17 to be precise) and am having trouble with a web application of mine using WebLogic.
    With other tools I've used, when running/debugging a servlet everything is fine, and when stopping it cleans out the deployed build of the web app from whatever container was used. However, WebLogic seems to leave the files where it deployed even after stopping the application and WebLogic.
    This is quite a problem as my servlet puts quite a few folders and files in the WEB-INF folder and sets them as read only too. When not read only it seems that the second time I start the application it removes all files in the folder that were created before, but leaves the folder structure which causes issues when my code looks for these and expects files to be there if the folder is there. With the files set to read only WebLogic doesn't even begin to deploy my code for some reason.
    For example (taken from the standard out when attempting to debug with the read only files left behind from a previous run):
    IntegratedWebLogicServer started.
    +[Running application FOX on Server Instance IntegratedWebLogicServer...]+
    +[05:30:03 PM] Web Module FOXWebApp.war recognized in project FOX.jpr+
    +[05:30:04 PM] ---- Deployment started. ----+
    +[05:30:04 PM] Target platform is (Weblogic 10.3).+
    +[05:30:05 PM] Retrieving existing application information+
    +[05:30:05 PM] Running dependency analysis...+
    +[05:30:05 PM] Deploying 2 profiles...+
    +[05:30:06 PM] Deployment cancelled.+
    +[05:30:06 PM] ---- Deployment incomplete ----.+
    *[05:30:06 PM] C:\Users\Nick\AppData\Roaming\JDeveloper\system11.1.2.0.38.60.17\o.j2ee\drs\FOX\FOXWebApp.war\WEB-INF\.engine_mirror\collabdev\components.xml (Access is denied)*
    +#### Cannot run application FOX due to error deploying to IntegratedWebLogicServer.+
    +[Application FOX stopped and undeployed from Server Instance IntegratedWebLogicServer]+
    +[Server Instance IntegratedWebLogicServer is shutting down.  All applications currently running will be terminated and undeployed.]+
    +[sending request to shutdown server...]+
    Just wondering if this is expected behavior? Shouldn't it remove all the web app data when undeploying? Surely there should be an option for this if not (I already checked the "undeploy all applications on shutdown" box is ticked in the weblogic server settings)?
    Currently, every time I want to test my application I have to manually remove the folder, which just seems absurd.

    Hi,
    Thank you for your feedback.
    Please accept my apology for this delayed reply because of the weekend here.
    Since I have not Win 7 involved, I could not reproduce this issue completely.
    I have tried to build one sample application from the Visual Studio 2013 Pro Command Prompt on Win 8.1, 64-Bit. 
    The first time when I built the solution, I could see 3 MSBuild tasks displayed on the following  screenshot:
    As for the second time to build it, the MSBuild tasks lasted only for seconds and then queued  themselves out quickly.
    So I don't think this is the problem of  Visual Studio 2013 Pro.
    Please check if you need to install some SDKs for this scenario or consider updating the Windows system to see if this issue could be fixed.
    Best Regards,
    Jane.
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Enqueue process not getting start after failover

    Hi Experts,
    We are facing problem suddenly after doing failover test. This problem arrived today only. Before it was happening successfully.
    Before failover everything is running fine on primary node. After doing failover the enqueue sever process on ASCS instance is not starting in secondary node.
    It's also showing license will expire on 16.11.2010, but system has
    already license installed.
    The ASCS start logs are showing as below -
    Execute Pre-Startup Commands
    (12517410) Local: /usr/sap/PRD/SYS/exe/run/sapcpe pf=/usr/sap/PRD/SYS/profile/PRD_ASCS00_sapprd1 list:/usr/sap/PRD/SYS/exe/run/scs.lst
    (11534542) system(/usr/sap/PRD/SYS/exe/run/sapcpe pf=/usr/sap/PRD/SYS/profile/PRD_ASCS00_sapprd1 list:/usr/sap/PRD/SYS/exe/run/scs.lst) returns 4
    (12517412) Local: /usr/sap/PRD/SYS/exe/run/sapcpe pf=/usr/sap/PRD/SYS/profile/PRD_ASCS00_sapprd1 list:/usr/sap/PRD/SYS/exe/run/sapcrypto.lst
    (11534542) system(/usr/sap/PRD/SYS/exe/run/sapcpe pf=/usr/sap/PRD/SYS/profile/PRD_ASCS00_sapprd1 list:/usr/sap/PRD/SYS/exe/run/sapcrypto.lst) returns 255
    (12517414) Local: rm -f ms.sapPRD_ASCS00
    (12517416) Local: ln -s -f /usr/sap/PRD/ASCS00/exe/msg_server ms.sapPRD_ASCS00
    (12517418) Local: rm -f en.sapPRD_ASCS00
    (12517420) Local: ln -s -f /usr/sap/PRD/ASCS00/exe/enserver en.sapPRD_ASCS00
    Starting Programs
    24.10.2010 18:39:42
    ShmDetach
    OK
    (12517424) Starting: local ms.sapPRD_ASCS00 pf=/usr/sap/PRD/SYS/profile/PRD_ASCS00_sapprd1
    (8585426) Starting: local en.sapPRD_ASCS00 pf=/usr/sap/PRD/SYS/profile/PRD_ASCS00_sapprd1
    (11534542) Waiting for Child Processes to terminate.
    (11534542) **** 2010/10/24 18:39:42 Child 8585426 terminated with Status 1 . ****
    (8585426) **** 2010/10/24 18:39:42 No RestartProgram command for program 1  ****
    It's unable to start enqueue server process.
    Please suggest your solutions.
    Regards,
    Ramesh.

    Hi Gagan,
    The enqueue problem is resolved. Atually 2 days before we increased RAM of primary node by 1GB, and that was creating issue. we revert it back and again did a switchover and everything is running fine. It was strange that my secondary node is getting affected due to increasing the RAM in primary node.
    Regarding license key, can you please provide me detail steps to resolve it. I have gone through installation doc but couldnt find it. Now Tcode slicense is showing another hardware key in my DI system. Do I need to get seperate permenant license key for DI by registering DI host and new hardware key??
    Just confirm and also add some of your expert suggetsions.
    Regards,
    Ramesh.
    Edited by: ramesh_basis on Oct 25, 2010 7:26 AM

  • Java processes not coming up after WAS JAVA installation

    Hi,
    After installing WAS ABAP and WAS JAVA, the Java related processes are not being seen.
    Under /usr/sap/<instance_name>/work, dev_jcontrol shows the following error:
    ERROR => OS release OS/400 V5R4 M0  570 is not supported with this startup framework (640) [jstartxx_mt. 3883]
    I had applied the SAPJ2EE patch but still I am having the same error.
    What next I could do to bring the Java processes up?
    Thanks
    Kiran

    Hi Kiran,
    I do have in mind, that this is described in the installation notes. It is very easy. The CDs are built for V5R3 and not V5R4 - but you are running V5R4. So, you need to patch the J2EE engine to the latest level and then this problem will disappear as the latest patch for sure includes the V5R4 certification.
    Regards
    Volker Gueldenpfennig, consolut.gmbh
    http://www.consolut.de - http://www.4soi.de - http://www.easymarketplace.de

  • Known issue: Cortana voice command definitions are not cleaned up after uninstalling the app (Windows 10 Insider Preview SDK and tools, April 2015 release)

    Voice command definitions are not removed from Cortana's cache when an app is uninstalled. This may cause conflicts between two apps that share the same voice commands.

    This issue should not impact your ability to reinstall and test the same application. However, you must reinstall the OS in order to reset the cache in cases where you are seeing conflicts between different apps.

  • ORB does not perform clean up after destroy() is called.

    hi,
    the HelloClient example (POA model) which is provided in the Java IDL tutorials, does not perform clean up after the execution is complete.
    i.e. i can still find the Socket descriptors in the file system under the path (/proc/p_id/fd). Do we need to explicitly destroy the sockets inorder to perform the required clean up??the OS i'm using is Linux.
    if yes, then how do i do that.... the following are the steps to reproduce the problem:
    1)start HelloServer
    2)start HelloClient
    3)check file count in /proc/process_id/fd before calling init.
    4)invoke ORB.destroy() method.
    5)check file count in /proc/process-id/fd after destroy completes.I have included Thread.sleep(25000) inorder to check the file count dynamically at each stage of execution.
    Any help in this regard is welcome....!!
    thanks in advance

    Hello:
    This reply may be long after the time that you need it ... but the problem
    that you are experiencing sounds very much like a bug that was fixed in the J2SE 1.5.0_10 release.
    It is bug 6354718 ....
    In the evaluation section of that bug they note:
    Yes. It's a known bug in ORB connection management. What's happening here is, the connectionCache that maintains both inbound and outbound connections does not reclaim connections, upon ORB destroy() call. There is a connection reclaim() logic in place, but does not kick in, until it reaches certain watermark levels. Since, a single client can have a multiple ORBs and thereby multiple outbound connections (in the reported case) , with each cache having exactly one connection which leaks up on ORB exit. This leak multiplies based on the number of ORBs and time period over which client stays live, up and running.
    The solution is, to walk through the connection cache and close each connection,
    no matter what the watermark levels are. This can be done at the corba transport manager close() call.
    Note: In the above evaluation they tell you how to fix it yourself but I believe (I haven't tested it yet ....) that if you upgrade to JDK 1.5.0_10, you should find that it has been fixed for you.
    I hope that I'm not steering you wrong, but that's my take on your situation.
    John

  • Hello i have a  an iPhone 5 .i updated it in the end of summer or begin of fall because i forget the number of  version.it is important that i update my i Phone by itself not with iTune . after that my device can not  join to wifi to internet but another

    hello
    i have a  an iPhone 5 .i updated it in the end of summer or begin of fall because i forget the number of  version.it is important that i update my i Phone by itself not with iTune . after that my device can not  join to wifi to internet but another of app works properly and cellular can join to internet . i reset my i phone in the setting . general section but my problem  is remaining .is possible that to return to older version? if there is any solution share with me and i be very thankfulness of you.tanks again 

    It is not possible to downgrade to an earlier version.
    Have you tried the tips on this help page? iOS: Troubleshooting Wi-Fi networks and connections
    And you dont need iTunes to update you're device. You can update it OTA in Settings > General > Software Update

  • Hello i have a  an iPhone 5 .i updated it in the end of summer or begin of fall because i forget the number of  version.it is important that i update my i Phone by itself not with iTune . after that my device can not  join to wifi to inter net but another

    hello
    i have a  an iPhone 5 .i updated it in the end of summer or begin of fall because i forget the number of  version.it is important that i update my i Phone by itself not with iTune . after that my device can not  join to wifi to inter net but another of app works properly and cellular can join to internet . i reset my i phone in the setting . general section but my problem  is remaining . if there is any solution share with me and i be very thankfulness of you.tanks again

    It is not possible to downgrade to an earlier version.
    Have you tried the tips on this help page? iOS: Troubleshooting Wi-Fi networks and connections
    And you dont need iTunes to update you're device. You can update it OTA in Settings > General > Software Update

  • Power Mac G4 not turning on after clean shutdown, works otherwise.

    My Power Mac G4 does not turn back on after a clean shutdown, but turns on after being disconnected from the power. If I shut it down cleanly (Apple menu -> Shutdown), it shuts down, but then the power button does not work. After unplugging the computer and plugging it back in, the computer is able to power on successfully. I have reset the PRAM and have reseated the PSU connector.
    I am using Mac OS X Tiger 10.4.11, but the same problem occurs under Mac OS X Leopard 10.5.8. I don't think the operating system really matters with this type of issue though, because the power button literally will not respond until I unplug and replug the computer.
    Any suggestions?
    Jonathan Alfonso’s Power Mac G4
    12/22/13 2:07 PM
    Hardware:
        Hardware Overview:
          Machine Name: Power Mac G4
          Machine Model: PowerMac3,6
          CPU Type: PowerPC G4  (3.3)
          Number Of CPUs: 2
          CPU Speed: 1.42 GHz
          L2 Cache (per CPU): 256 KB
          L3 Cache (per CPU): 2 MB
          Memory: 2 GB
          Bus Speed: 167 MHz
          Boot ROM Version: 4.6.0f1
          Serial Number: XB3101EMN1Y
    Network:
        Internal Modem:
          Type: PPP (PPPSerial)
          Hardware: Modem
          BSD Device Name: modem
          IPv4:
              Configuration Method: PPP
          IPv6:
              Configuration Method: Automatic
          Proxies:
              Proxy Configuration Method: Manual
              ExcludeSimpleHostnames: 0
              FTP Passive Mode: Yes
              Auto Discovery Enabled: No
        Built-in Ethernet:
          Type: Ethernet
          Hardware: Ethernet
          BSD Device Name: en0
          IPv4:
              Configuration Method: DHCP
          IPv6:
              Configuration Method: Automatic
          Proxies:
              FTP Proxy Enabled: No
              FTP Passive Mode: Yes
              Gopher Proxy Enabled: No
              HTTP Proxy Enabled: No
              HTTPS Proxy Enabled: No
              RTSP Proxy Enabled: No
              SOCKS Proxy Enabled: No
          Ethernet:
              MAC Address: 00:0a:95:9c:64:40
              Media Options:
              Media Subtype: none
        Built-in FireWire:
          Type: FireWire
          Hardware: FireWire
          BSD Device Name: fw0
          IPv4:
              Configuration Method: DHCP
          IPv6:
              Configuration Method: Automatic
          Proxies:
              Proxy Configuration Method: Manual
              ExcludeSimpleHostnames: 0
              FTP Passive Mode: Yes
              Auto Discovery Enabled: No
          Ethernet:
              MAC Address: 00:0a:95:ff:fe:9c:64:40
              Media Options: Full Duplex
              Media Subtype: autoselect
        AirPort:
          Type: AirPort
          Hardware: AirPort
          BSD Device Name: en1
          IPv4 Addresses: 192.168.1.134
          IPv4:
              Addresses: 192.168.1.134
              Configuration Method: DHCP
              Interface Name: en1
              Router: 192.168.1.1
              Subnet Masks: 255.255.255.0
          IPv6:
              Configuration Method: Automatic
          DNS:
              Domain Name: hsd1.fl.comcast.net
              Server Addresses: 192.168.1.1
          DHCP Server Responses:
              Domain Name: hsd1.fl.comcast.net
              Domain Name Servers: 192.168.1.1
              Lease Duration (seconds): 0
              DHCP Message Type: 0x05
              Routers: 192.168.1.1
              Server Identifier: 192.168.1.1
              Subnet Mask: 255.255.255.0
          Proxies:
              Proxy Configuration Method: Manual
              ExcludeSimpleHostnames: 0
              FTP Passive Mode: Yes
              Auto Discovery Enabled: No
          Ethernet:
              MAC Address: 00:0d:93:ef:b8:69
              Media Options:
              Media Subtype: autoselect
    Software:
        System Software Overview:
          System Version: Mac OS X 10.4.11 (8S165)
          Kernel Version: Darwin 8.11.0
          Boot Volume: Macintosh HD
          Computer Name: Jonathan Alfonso’s Power Mac G4
          User Name: Jonathan Alfonso (alfonsojon)
    ATA:
        ATA Bus:
            MAXTOR STM3500630A:
              Capacity: 465.76 GB
              Model: MAXTOR STM3500630A
              Revision: 3.AAE
              Serial Number: 9QG5RHPR
              Removable Media: No
              Detachable Drive: No
              BSD Name: disk0
              Protocol: ATA
              Unit Number: 0
              Socket Type: Internal
              OS9 Drivers: No
              S.M.A.R.T. status: Verified
              Volumes:
                Macintosh HD:
                  Capacity: 465.64 GB
                  Available: 458.51 GB
                  Writable: Yes
                  File System: Journaled HFS+
                  BSD Name: disk0s3
                  Mount Point: /
            ST3200822A:
              Capacity: 186.31 GB
              Model: ST3200822A
              Revision: 3.01
              Serial Number: 3LJ078AZ
              Removable Media: No
              Detachable Drive: No
              BSD Name: disk1
              Protocol: ATA
              Unit Number: 1
              Socket Type: Internal
              OS9 Drivers: No
              S.M.A.R.T. status: Not Supported
              Volumes:
                Time Machine:
                  Capacity: 185.99 GB
                  Available: 136.84 GB
                  Writable: Yes
                  File System: Journaled HFS+
                  BSD Name: disk1s2
                  Mount Point: /Volumes/Time Machine
        ATA Bus:
            PIONEER DVD-RW  DVR-105:
              Capacity: 2.64 GB
              Model: PIONEER DVD-RW  DVR-105
              Revision: A506
              Serial Number: BLDL034723WL
              Removable Media: Yes
              Detachable Drive: No
              BSD Name: disk2
              Protocol: ATAPI
              Unit Number: 0
              Socket Type: Internal
              OS9 Drivers: No
              S.M.A.R.T. status: Not Supported
              Volumes:
                Mac OS X Install DVD:
                  Capacity: 2.64 GB
                  Available: 110.27 MB
                  Media Type: DVD-R
                  Writable: No
                  File System: HFS+
                  BSD Name: disk2s2
                  Mount Point: /Volumes/Mac OS X Install DVD
    Audio (Built In):
        Built In Sound Card:
          CODEC: Texas Instruments TAS3004
          Sample Rate: 44.1 KHz
          Number of Inputs: 1
          Number of Outputs: 4
          Devices:
            Input:
              Type: Line Level Input
            Output:
              Type: Headphones
            Output:
              Type: Internal Speaker
            Output:
              Type: External Speaker
            Output:
              Type: Line Level Output
    Diagnostics:
        Power On Self-Test:
          Last Run: 12/22/13 12:51 PM
          Result: Passed
    Disc Burning:
        PIONEER DVD-RW  DVR-105:
          Firmware Revision: A506
          Interconnect: ATAPI
          Burn Support: Yes (Apple Shipped/Supported)
          Cache: 2000 KB
          Reads DVD: Yes
          CD-Write: -R, -RW
          DVD-Write: -R, -RW
          Burn Underrun Protection CD: Yes
          Burn Underrun Protection DVD: Yes
          Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
          Media:
              Media Type: DVD-R
              Blank: No
              Erasable: No
              Overwritable: No
              Appendable: No
    FireWire:
        FireWire Bus:
          Maximum Speed: Up to 800 Mb/sec
    Graphics/Displays:
        ATI Radeon 9000 Pro:
          Chipset Model: ATY,RV250
          Type: Display
          Bus: AGP
          Slot: SLOT-1
          VRAM (Total): 64 MB
          Vendor: ATI (0x1002)
          Device ID: 0x4966
          Revision ID: 0x0000
          ROM Revision: 113-99702-122
          Displays:
            Acer AL2017:
              Resolution: 1400 x 1050 @ 60 Hz
              Depth: 32-bit Color
              Core Image: Not Supported
              Main Display: Yes
              Mirror: Off
              Online: Yes
              Quartz Extreme: Supported
              Rotation: Supported
            Display:
              Status: No display connected
    Memory:
        DIMM0/J21:
          Size: 512 MB
          Type: DDR SDRAM
          Speed: PC2700U-25330
          Status: OK
        DIMM1/J22:
          Size: 512 MB
          Type: DDR SDRAM
          Speed: PC2700U-25330
          Status: OK
        DIMM2/J23:
          Size: 512 MB
          Type: DDR SDRAM
          Speed: PC2700U-25330
          Status: OK
        DIMM3/J20:
          Size: 512 MB
          Type: DDR SDRAM
          Speed: PC2700U-25330
          Status: OK
    PCI Cards:
        usb:
          Type: usb
          Bus: PCI
          Slot: SLOT-5
          Vendor ID: 0x1033
          Device ID: 0x0035
          Subsystem Vendor ID: 0x17c6
          Subsystem ID: 0x0036
          Revision ID: 0x0041
        usb:
          Type: usb
          Bus: PCI
          Slot: SLOT-5
          Vendor ID: 0x1033
          Device ID: 0x0035
          Subsystem Vendor ID: 0x17c6
          Subsystem ID: 0x0036
          Revision ID: 0x0041
        pci17c6,e1:
          Bus: PCI
          Slot: SLOT-5
          Vendor ID: 0x1033
          Device ID: 0x00e0
          Subsystem Vendor ID: 0x17c6
          Subsystem ID: 0x00e1
          Revision ID: 0x0002
    Power:
        System Power Settings:
          AC Power:
              System Sleep Timer (Minutes): 10
              Disk Sleep Timer (Minutes): 10
              Display Sleep Timer (Minutes): 10
              Sleep On Power Button: Yes
              Automatic Restart On Power Loss: Yes
              Wake On AC Change: No
              Wake On LAN: Yes
              Wake On Modem Ring: Yes
    USB:
        USB Bus:
          Host Controller Location: Built In USB
          Host Controller Driver: AppleUSBOHCI
          PCI Device ID: 0x0035
          PCI Revision ID: 0x0043
          PCI Vendor ID: 0x1033
          Bus Number: 0x3b
            Microsoft® Digital Media Pro Keyboard:
              Version: 1.10
              Bus Power (mA): 500
              Speed: Up to 1.5 Mb/sec
              Manufacturer: Microsoft
              Product ID: 0x00b0
              Vendor ID: 0x045e
        USB Bus:
          Host Controller Location: Built In USB
          Host Controller Driver: AppleUSBOHCI
          PCI Device ID: 0x0035
          PCI Revision ID: 0x0043
          PCI Vendor ID: 0x1033
          Bus Number: 0x1b
            Kensington USB/PS2 Wheel Mouse:
              Version: 1.00
              Bus Power (mA): 500
              Speed: Up to 1.5 Mb/sec
              Manufacturer: Kensington
              Product ID: 0x102a
              Vendor ID: 0x047d
        USB Bus:
          Host Controller Location: Expansion Slot
          Host Controller Driver: AppleUSBOHCI
          PCI Device ID: 0x0035
          PCI Revision ID: 0x0041
          PCI Vendor ID: 0x1033
          Bus Number: 0x15
        USB Bus:
          Host Controller Location: Expansion Slot
          Host Controller Driver: AppleUSBOHCI
          PCI Device ID: 0x0035
          PCI Revision ID: 0x0041
          PCI Vendor ID: 0x1033
          Bus Number: 0x35
        USB High-Speed Bus:
          Host Controller Location: Expansion Slot
          Host Controller Driver: AppleUSBEHCI
          PCI Device ID: 0x00e0
          PCI Revision ID: 0x0002
          PCI Vendor ID: 0x1033
          Bus Number: 0x55
    AirPort Card:
        AirPort Card Information:
          Wireless Card Type: AirPort Extreme
          Wireless Card Locale: USA
          Wireless Card Firmware Version: 405.1 (3.90.34.0.p18)
          Current Wireless Network: Alfonso
          Wireless Channel: 3
    Locations:
        Automatic:
          Active Location: Yes
          Services:
            Internal Modem:
              Type: PPP
              IPv4:
                  Configuration Method: PPP
              IPv6:
                  Configuration Method: Automatic
              Proxies:
                  Proxy Configuration Method: 2
                  ExcludeSimpleHostnames: 0
                  FTP Passive Mode: 1
                  Auto Discovery Enabled: 0
              PPP:
                  ACSP Enabled: 0
                  Display Terminal Window: 0
                  Redial Count: 1
                  Redial Enabled: 1
                  Redial Interval: 5
                  Use Terminal Script: 0
                  Dial On Demand: 0
                  Disconnect On Fast User Switch: 1
                  Disconnect On Idle: 1
                  Disconnect On Idle Timer: 600
                  Disconnect On Logout: 1
                  Disconnect On Sleep: 1
                  Idle Reminder: 0
                  Idle Reminder Time: 1800
                  IPCP Compression VJ: 1
                  LCP Echo Enabled: 1
                  LCP Echo Failure: 4
                  LCP Echo Interval: 10
                  Log File: /var/log/ppp.log
                  Verbose Logging: 0
            Built-in Ethernet:
              Type: Ethernet
              BSD Device Name: en0
              Hardware (MAC) Address: 00:0a:95:9c:64:40
              IPv4:
                  Configuration Method: DHCP
              IPv6:
                  Configuration Method: Automatic
              AppleTalk:
                  Configuration Method: Node
              Proxies:
                  FTP Proxy Enabled: 0
                  FTP Passive Mode: 1
                  Gopher Proxy Enabled: 0
                  HTTP Proxy Enabled: 0
                  HTTPS Proxy Enabled: 0
                  RTSP Proxy Enabled: 0
                  SOCKS Proxy Enabled: 0
            Built-in FireWire:
              Type: FireWire
              BSD Device Name: fw0
              Hardware (MAC) Address: 00:0a:95:ff:fe:9c:64:40
              IPv4:
                  Configuration Method: DHCP
              IPv6:
                  Configuration Method: Automatic
              AppleTalk:
                  Configuration Method: Node
              Proxies:
                  Proxy Configuration Method: 2
                  ExcludeSimpleHostnames: 0
                  FTP Passive Mode: 1
                  Auto Discovery Enabled: 0
            AirPort:
              Type: IEEE80211
              BSD Device Name: en1
              Hardware (MAC) Address: 00:0d:93:ef:b8:69
              IPv4:
                  Configuration Method: DHCP
              IPv6:
                  Configuration Method: Automatic
              AppleTalk:
                  Configuration Method: Node
              Proxies:
                  Proxy Configuration Method: 2
                  ExcludeSimpleHostnames: 0
                  FTP Passive Mode: 1
                  Auto Discovery Enabled: 0
              IEEE80211:
                  AllowNetCreation: 1
                  JoinMode: Automatic
                  MAC Address: 00:0d:93:ef:b8:69
    Modems:
        Modem Information:
          Modem Model: Dash2
          Interface Type: USB
          Modulation: V.92
          SKU Name: UCJ
          Hardware Version: 1.0F
          Firmware Version: APPLE VERSION 2.6.6
          Driver: InternalUSBModem.kext (v2.6.6)
          Country: B5 (United States, Latin America)

    Still not sure what Mac you have, but do you have a multimeter?
    You can convert an ATX PSU for use on a G4...
    http://atxg4.com/sawtooth.html http://atxg4.com/gige-da.html
    http://atxg4.com/quicksilver.html
    http://atxg4.com/mdd.html
    http://atxg4.com/
    Hank, have you tested the MDD PSU?
    http://www.jcsenterprises.com/Japamacs_Page/Blog/D275729F-09DA-4FBB-96B3-BEEEB2C 04619.html

  • "disp+work" process in not getting started after kernel upgradation

    Hello Experts,
    Good day…..,
    I am new to SAP. I installed SAP ECC6 EHP4 with default kernel version 701 and it was working fine.
    I have upgraded kernel version from 701 to 741, but the “disp+work” process is not getting started after kernel upgrade.
    I have posted “dev_W0” log &
    “disp+work” command result obtained in CMD prompt of respective server.
    Please help me out in this. Thanks all in advance.
    “dev_w0” Log”
    trc file: "dev_w0", trc level: 1, release: "741"
    *  ACTIVE TRACE LEVEL           1
    *  ACTIVE TRACE COMPONENTS      all, MJ
    M sysno      55
    M sid        TNG
    M systemid   562 (PC with Windows NT)
    M relno      7410
    M patchlevel 0
    M patchno    42
    M intno      20020600
    M make multithreaded, Unicode, 64 bit, optimized
    M profile D:\usr\sap\TNG\SYS\profile\TNG_DVEBMGS55_ABTHMSSB01
    M pid        2392
    M
    M 
    M Wed Jul 23 02:04:35 2014
    M  kernel runs with dp version 208000(ext=117000) (@(#) DPLIB-INT-VERSION-208000-UC)
    M  length of sys_adm_ext is 500 bytes
    M  ***LOG Q0Q=> tskh_init, WPStart (Workp. 0 2392) [dpInit.c 731]
    M  DpCommonParamInit: rdisp/core_file_size = default --> no change
    I  MtxInit: 30000 0 0
    M 
    M Wed Jul 23 02:04:36 2014
    M  DpIPCInit2: read dp-profile-values from sys_adm_ext
    M  DpShMCreate: alloate/attach shared memory (mode=ATTACH)
    M  DpShMCreate: sizeof(wp_adm)                         24288    (1104)
    M  DpShMCreate: sizeof(tm_adm)                          51472080             (256080)
    M  DpShMCreate: sizeof(ca_adm)                           432000  (72)
    M  DpCommTableSize: max/headSize/ftSize/tableSize=500/16/7464064/7583152
    M  DpShMCreate: sizeof(comm_adm)                   7583152                (14904)
    M  DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
    M  DpShMCreate: sizeof(slock_adm)                      0              (296)
    M  DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    M  DpShMCreate: sizeof(file_adm)                         0              (80)
    M  DpSockTableSize: max/headSize/ftSize/tableSize=500/16/520064/520080
    M  DpShMCreate: sizeof(sock_adm)                       520080  (1016)
    M  DpShMCreate: sizeof(vmc_adm)                       0              (3208)
    M  DpShMCreate: sizeof(wall_adm)                        (ft=41664/fi=67472/hd=64/rec=192)
    M  DpShMCreate: sizeof(amc_rec_adm)                              (ft=86464/fi=67472/hd=64/rec=416)
    M  DpShMCreate: sizeof(websocket_adm)                         (ft=28864/hd=64/rec=272)
    M  DpShMCreate: sizeof(gw_adm)          64
    M  DpShMCreate: sizeof(j2ee_adm)       3936
    M  DpShMCreate: SHM_DP_ADM_KEY                  (addr: 00000000103D0050, size: 60433936
    M  DpShMCreate: allocated sys_adm at 00000000103D0250
    M  DpShMCreate: allocated wp_adm_list at 00000000103E20F0
    M  DpShMCreate: allocated wp_adm at 00000000103E2410
    M  DpShMCreate: allocated tm_adm_list at 00000000103E84F0
    M  DpShMCreate: allocated tm_adm at 00000000103E8730
    M  DpShMCreate: allocated ca_adm at 00000000134FF000
    M  DpShMCreate: allocated comm_adm at 0000000013568980
    M  DpShMCreate: system runs without slock table
    M  DpShMCreate: allocated sock_adm at  0000000013CA4130
    M  DpShMCreate: allocated vmc_adm_list at 0000000013D232C0
    M  DpShMCreate: system runs without VMC
    M  DpShMCreate: allocated gw_adm at 0000000013D23560
    M  DpShMCreate: allocated j2ee_adm at 0000000013D237A0
    M  DpShMCreate: allocated ca_info at 0000000013D24900
    M  DpShMCreate: allocated wall_adm (ft) at 0000000013D24B40
    M  DpShMCreate: allocated wall_adm (fi) at 0000000013D2F000
    M  DpShMCreate: allocated wall_adm (head) at 0000000013D3F990
    M  DpShMCreate: allocated amc_rec_adm (ft) at 0000000013D3FBD0
    M  DpShMCreate: allocated amc_rec_adm (fi) at 0000000013D54F90
    M  DpShMCreate: allocated amc_rec_adm (head) at 0000000013D65920
    M  DpShMCreate: allocated websocket_adm (ft) at 0000000013D65B60
    M  DpShMCreate: allocated websocket_adm (head) at 0000000013D6CE20
    M  DpShMCreate: initialized 21 eyes
    M  DpCommAttachTable: attached comm table (header=0000000013568980/ft=0000000013568990/fi=0000000013C86E10)
    M  DpSockAttachTable: attached sock table (header=0000000013CA4130/ft=0000000013CA4140)
    X  EmInit: MmSetImplementation( 2 ).
    X  MM global diagnostic options set: 0
    X  <ES> client 0 initializing ....
    X  <ES> EsILock: use Semphore 33 for locking
    X  Using implementation view
    X  <EsNT> Using memory model view.
    M  <EsNT> Memory Reset disabled as NT default
    X  ES initialized.
    X 
    X Wed Jul 23 02:04:37 2014
    X  mm.dump: set maximum dump mem to 96 MB
    M  ThStart: taskhandler started
    M  ThInit: initializing DIA work process W0
    M 
    M Wed Jul 23 02:04:44 2014
    M  ThInit: running on host ABTHMSSB01
    I  MtxInit: 0 0 0
    M 
    M Wed Jul 23 02:04:45 2014
    M  calling db_connect ...
    B  Loading DB library 'D:\usr\sap\TNG\DVEBMGS55\exe\dboraslib.dll' ...
    B  Library 'D:\usr\sap\TNG\DVEBMGS55\exe\dboraslib.dll' loaded
    B  Version of 'D:\usr\sap\TNG\DVEBMGS55\exe\dboraslib.dll' is "741.10", patchlevel (0.42)
    C  Prepending D:\usr\sap\TNG\DVEBMGS55\exe to Path.
    C  Register application info.
    C 
    C Wed Jul 23 02:04:47 2014
    C  Oracle client version: 10.2.0.4.0, (dbsl 741 040714, UNICODE[2])
    C  Detailed Oracle client (patch) info not available.
    C  *** ERROR => Connect via SAPUSER not supported for kernel >= 740.
    [dbsloci.c    2406]
    C     Only Secure Connect method possible.
    M  ***LOG R19=> ThDbConnect, db_connect ( DB-Connect 000256) [thDatabase.c 76]
    M  in_ThErrHandle: 1
    M  *** ERROR => ThInit: db_connect (step TH_INIT, thRc ERROR-DB-CONNECT_ERROR, action STOP_WP, level 1) [thxxhead.c   2281]
    M Wed Jul 23 02:04:48 2014
    M 
    M  Info for wp 0
    M 
    M    pid = 2392
    M    severity = 0
    M    status = 0
    M    stat = WP_NEW
    M    waiting_for = NO_WAITING
    M    workerType = DP_WORKER_DIAWP
    M    act_cs_count = 0
    M    csTrack = 0
    M    csTrackRwExcl = 0
    M    csTrackRwShrd = 0
    M mode_cleaned_counter = 0
    M    control_flag = 0
    M    report = > <
    M    action = 0
    M    tab_name = >                              <
    M 
    M  ThIErrHandle: no current incoming request
    M 
    M 
    M *****************************************************************************
    M  *
    M  *  LOCATION SAP-Server ABTHMSSB01_TNG_55 on host ABTHMSSB01 (wp 0)
    M  *  ERROR ThInit: db_connect
    M  *
    M  *  TIME Wed Jul 23 02:04:48 2014
    M  *  RELEASE 741
    M  *  COMPONENT Taskhandler
    M  *  VERSION 1
    M  *  RC 16797709
    M  *  MODULE D:/depot/bas/741_REL/src/krn/si/th/thxxhead.c
    M  *  LINE 2470
    M  *  COUNTER 1
    M  *
    M  *****************************************************************************
    M 
    M  PfRejectStatistic: clear statistic record
    M  PfClearAllRec: clear statistic area
    M  PfClearAllRec: statRecordAction = STAT_RECORD_ACTION_REJECT
    M  Entering TH_CALLHOOKS
    M  ThCallHooks: call hooks for event BEFORE_DUMP
    M  ThIErrHandle: entering ThSetStatError
    M  ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
    M  call ThrShutDown (1)...
    M  ***LOG Q02=> wp_halt, WPStop (Workp. 0 2392) [dpnttool.c 335]
    “Desp+Work” Command result:
    C:\Users\tngadm>disp+work
    disp+work information
    kernel release 741
    kernel make variant 741_REL
    compiled on NT 6.0 6002 x86 MS VC++ 16.00 for NTAMD64
    compiled for                  64 BIT
    compilation mode UNICODE
    compile time Jul  9 2014 16:39:46
    update level 0
    patch number 42
    source id 0.042
    RKS compatibility level 0
    supported environment
    database (SAP, table SVERS) 700
    710
    701
    702
    703
                                  711
    720
    730
    731
    732
    738
    740
    operating system
    Windows NT 5.1
    Windows NT 5.2
    Windows NT 6.0
    Windows NT 6.1
    Windows NT 6.2
    Windows NT 6.3
    C:\Users\tng

    C  *** ERROR => Connect via SAPUSER not supported for kernel >= 740.
    [dbsloci.c    2406]
    C     Only Secure Connect method possible.
    For this issue you need to set up SSFS.
    1639578 - SSFS as password storage for primary database connect
    I am new to SAP. I installed SAP ECC6 EHP4 with default kernel version 701 and it was working fine.
    I have upgraded kernel version from 701 to 741
    Are you sure kernel 741 is compatible with an EHP 4 system ?
    Read this SAP note
    1969546 - Release Roadmap Kernel 740
    Regards
    RB

  • Could not archive file after processing.

    All,
    I'm doing simple File-File  sceanario.I'm using NFS.But I'm getting the following error in sender communication channel monitoring.
    Error: com.sap.aii.af.service.util.transaction.api.TxManagerException: Unable to commit transaction: The transaction has been rolled back: com.sap.engine.services.ts.transaction.TxRollbackException
    Could not archive file "sample.txt" after processing
    Note: The folder has full rights of read/write.
    Can some one please help me to resolve this issue.
    Thanks.

    Hi Michal,
    Thanks for the quick reply.I'm seeing this error in Production environment.So i cannot try as you suggested.
    It was working until yesterday .I checked with BASIS team aswell for the folder access , Everything is OK .
    Is there any other way i can check to resolve this?
    Thanks

  • "Page not found" error after 5 minutes of see "processing" on the screen

    We are using WebLogic 8.1 server and also the WebLogic proxy as our front end. When a user runs a process that takes over 5 minutes using the Proxy URL they receive an IE "Page not found" error after 5 minutes of seeing "processing" on the screen. If they run it on none Proxy URL (directly on WebLogic server) it works fine.
    We have looked into the WLIOTimeoutSecs parameter and set in the web.xml for both the HttpClusterServlet and HttpProxyServlet, but this had no affect.
    Is there another timeout that controls this 5 minute timeout? It seems if one uses Apache and sets the WLIOTimeoutSecs parameter to a higher number than 300 seconds there is not an issue.
    Did this parameter get omitted for the WebLogic Proxy and if so, what does one use?
    Thanks,
    Jim

    Hello George,
    Thank you for the quick reply. I will surely try the option suggested by you.
    But what i was thinking is that as this is not a Connection Time Out (500) error, instead its a Page Not Found error, it would be Session-Timeout and not Connection Time-Out.
    Maybe I should be looking at:
    SESSION-TIMEOUT due to kernel:
        Kernel parameter:    rdisp/gui_auto_logout
        Kernel parameter:    rdisp/plugin_auto_logout
    as per the SAP OSS Note: 705013
    But again, I think this Note is pointing to the SICF service and IAC type of iView and not SAP Transaction type iView. Please advice.
    Thanks,
    Gaurav
    Edited by: Gaurav Shah on Dec 4, 2008 9:37 PM
    Edited by: Gaurav Shah on Dec 4, 2008 9:42 PM

  • Page item value set in app process not maintained after page submit

    Hi -- I have a sequence of events that goes like this:
    1) Page 0 region REG_1 is rendered before footer
    - Region REG_1 uses javascript / AJAX to call App process PROC_1
    - PROC_1 sets Page1 item PAGE1_MESSAGE to X
    - After PROC_1 executes successfully, REG_1 does doSubmit()
    2) Page 0 region REG_2 is rendered before footer; this happens
    after the page submit done by REG_1. (Conditions ensure that
    REG_1 is not rendered again)
    - Region REG_2 displays PAGE1_MESSAGE (=X) in an alert.
    - Region REG_2 uses javascript / AJAX to call App process PROC_2
    - PROC_2 sets Page1 item PAGE1_MESSAGE to Y
    - PROC_2 sets Application item DEBUG to PAGE1_MESSAGE (this is for debugging)
    - PROC_2 sets Application item APP_MESSAGE to Y (this is also for debugging)
    - After PROC_2 executes successfully, REG_2 does doSubmit()
    3) After REG_2 submits the page, here's what I have:
    - Application item APP_MESSAGE = Y. Good. This is what it was set to in PROC_2.
    - Page 1 item PAGE1_MESSAGE = X. Bad. This is what it was set to in PROC_1.
    - Application item DEBUG = Y. Good. This at least shows that PAGE1_MESSAGE was
    set to Y within PROC_2... but for some reason that value is not being preserved
    after the app process is done executing.
    - There are several other application items set in PROC_2, and they're all correct.
    Any ideas as to why this is happening? It seems like this should be
    pretty straightforward: set the value, submit the page, the value should be what
    I set it to.
    Thanks,
    Carol

    Hi -- Thanks for the suggestions. First and 3rd (default value, or being overwritten by process or computation) aren't happening. The source for PAGE1_MESSAGE having is Always, Using app item PAGE1_MESSAGE... but I don't see what else could work here. Not sure if that's the problem.
    I've put an example on apex.oracle.com. Workspace is dew_mir_tor. Username is [email protected]. Password is Mir97Dew77!Tor. Application is 22679, RefreshAllTest.
    To reiterate the description in my original posting, but using the real application item/region/process names:
    0) Press Button REFRESH_ALL on Page 1. This branches back to Page 1.
    1) Page 0 region Refresh_All is rendered before footer
    - Region sends up an alert to show you it's working
    - Region Refresh_All uses javascript / AJAX to call App process REFRESH_CZAR (You'll see a "wait" window flash up briefly while the app process is running)
    - REFRESH_CZAR sets Page1 item P1_MESSAGE_1 to X (The text here indicates where
    the value is being set and when it should be displayed)
    - After REFRESH_CZAR executes successfully, region Refresh_All does doSubmit()
    2) Page 0 region Refresh_Non_Czar is rendered before footer; this happens
    after the page submit done by Refresh_Czar. (Conditions ensure that
    Refresh_Czar is not rendered again)
    - Region sends up an alert to show you it's working
    - Region Refresh_Non_Czar displays P1_MESSAGE_1 in an alert.
    - Region Refresh_Non_Czar uses javascript / AJAX to call App process REFRESH_NON_CZAR (You'll see a "wait" window flash up briefly while the app process is running)
    - REFRESH_NON_CZAR sets Page1 item P1_MESSAGE_1 to Y (The text here indicates where
    the value is being set and when it should be displayed
    - REFRESH_NON_CZAR sets Application item TEST_VALUE2 to P1_MESSAGE_1 (this just shows that P1_MESSAGE_1 was indeed set to Y in this process...)
    - After process REFRESH_NON_CZAR executes successfully, region Refresh_Non_Czar does doSubmit()
    3) After Refresh_Non_Czar submits the page, Page 0 region Display_Messages is rendered.
    It sends up an alert so you can see it's working, and then it displays the value in P1_MESSAGE_1.
    The value is still the one that was set in REFRESH_CZAR, not the one set in REFRESH_NON_CZAR.
    Note that Display_Messages sets P1_MESSAGE_1 back to null, so you won't see it in session state after it's displayed in the alert. But you can see that TEST_VALUE2 is set to the message from REFRESH_NON_CZAR.
    Hope this helps solve the problem!
    Thanks,
    Carol

  • "Page Not Found" Err after arnd 5 mins of processing on SAP Trans iView

    Hello All,
    We are facing an issue related to a SAP Transaction iView on our portal.
    This transaction is supposed to upload an excel file in RPM and provide a log after the upload is performed. We are trying to upload around 180 projects and the processing goes on in the backend. The program in the backend works as required, but as the iView shows a page not found after around 5-6 mins of processing, the users cannot see the logs in the end!
    I suppose there should be some kind of time-out parameter for the Transaction type iView, but we are not able to figure it out!!
    We have tried the following parameters without success:
    icm/server_port_0 = PROT=HTTP, PORT=8035, TIMEOUT=3600, PROCTIMEOUT=3600
    icm/keep_alive_timeout (sec.) = 3600
    icm/conn_timeout = 5000
    rdisp/plugin_auto_logout = 1800
    Please do suggest if there is anything else that we need to update to get this process to continue on the Portal and avoid the 'Page Not Found' issue.
    For the current on-going discussion for the same issue, please refer:
    ["Page Not Found" Error after arnd 5 mins of processing on SAP Trans iView;
    Thank you for your time!
    Regards,
    Gaurav
    Edited by: Gaurav Shah on Dec 9, 2008 7:22 PM

    Hi Gaurav,
    I know this thread is old. but i am getting the similar page cannot be displayed after 600 seconds.
    I changed the ICM timeout to 1800 from 600 but it still doesnt seem to work. Were you able to resolve the issue. If yes then please let me know the fix.
    Regards
    Aditya

  • Macbook pro storage do not get smaller after cleaning up photos in new photos app

    Macbook pro storage do not get smaller after cleaning up photos in new photos app.
    How can I delete photos? are they hidden somwhere?

    Yes, trash is empty. And in photos libary I only have 1800 items. Also I havent got so much movies.

Maybe you are looking for