VSC 5.0 Discovery fails to find all SVMs
Virtual Storage Console (VSC) 5.0 will not discover all of the Clustered ONTAP 8.2.1 storage virtual machines (SVM) in our vSphere 5.5 environment. The cluster and two of the three SVM names will appear in the Storage Systems inventory, but we are unable to show the third SVM without a direct connection. We prefer to use the cluster administrative LIF to take advantage tunneled auto-discovery and avoid any issues from direct connections to the SVM. The missing SVM has a management LIF and the ontapi (Remote Administrative API Support) web service is enabled (verified on cluster via “vserver services web show”). We also tried restarting the VSC service per the VSC 5.0 with two ONTAP Clusters discussion.What might we be missing?
Hi, I also had the same issue with VSC 6.0 where the SVM was not being displayed. Here is the solution that worked for me:Check there is a domain-tunnel created for you vserver. EG cluster1>domain-tunnel show If your vserver is not displayed in the output then create a domain-tunnel. EG cluster1>domain-tunnel create -vserver vserver1 /matt
Similar Messages
-
Searching Calendar fails to find all events
First, this program is no longer called iCal. I understand the change, but others may be confused.
Second, when searching for all events with a certain word, it is clear that not all events are being returned.
I'm using Calendar under OS-X 10.9.2 and the calendars are iCloud based.
There seems to be no logic to the events that ought to be caught by the search but that are omitted. I'm estimating only about a third of events matching my search criteria (just a word, like "Volunteer") are being returned. I can see all the events with that word in the calendar but they don't all turn up in a search.
I tried re-indexing with mdimport to no avail. This makes Calendar nearly useless, if search is not reliable.Hi, I also had the same issue with VSC 6.0 where the SVM was not being displayed. Here is the solution that worked for me:Check there is a domain-tunnel created for you vserver. EG cluster1>domain-tunnel show If your vserver is not displayed in the output then create a domain-tunnel. EG cluster1>domain-tunnel create -vserver vserver1 /matt
-
Find All Occurrences always fails within loop
Dear forumers,
There's this strange problem that requires a fix.
Finding all occurences of '#' works fine here:-
REPORT zz_test.
DATA: lv_text TYPE string,
ls_result TYPE match_result,
et_release type table of yytc_release,
lt_result TYPE match_result_tab.
lv_text = '"RFC-1234#Create ""Payroll"" under NL directory"'.
FIND ALL OCCURRENCES OF REGEX '#'
IN lv_text
RESULTS lt_result IGNORING CASE IN CHARACTER MODE.
IF sy-subrc = 0. " SY-SUBRC is always 0
READ TABLE lt_result INTO ls_result INDEX 1.
WRITE :'Offset: ' .
WRITE: ls_result-offset .
WRITE: lv_text+00(ls_result-offset).
ENDIF.
But it always fails here, within a loop at an internal table:-
SELECT * .... INTO TABLE it_jira ...
LOOP AT it_jira ASSIGNING <jira>.
<release>-summary = <jira>-summary.
IF <release>-type CS 'Subtask'.
" <release>-summary is of data type CHAR255
PERFORM get_subtask USING <release>-summary.
ENDIF.
ENDLOOP.
FORM get_subtask USING pv_summary TYPE yytc_release-summary.
DATA:
lv_string TYPE char255,
lv_final TYPE char255,
lv_summary TYPE string,
lv_strlen TYPE i,
lt_result TYPE match_result_tab.
lv_string = pv_summary. " LV_STRING = '"RFC-1234#Create ""Payroll"" under NL directory"''
CONDENSE lv_string.
lv_strlen = STRLEN( lv_string ).
lv_strlen = lv_strlen - 1.
IF lv_string+0(1) = '"' AND lv_string+lv_strlen(1) = '"'.
lv_strlen = lv_strlen - 1.
WRITE lv_string+1(lv_strlen) TO lv_final+1(254).
ENDIF.
lv_summary = lv_final.
" FIND ALL OCCURRENCES OF '#'
" IN lv_summary
" RESULTS lt_result IGNORING CASE. * SY-SUBRC is always 4 here too
FIND ALL OCCURRENCES OF REGEX '#'
IN lv_summary
RESULTS lt_result IGNORING CASE IN CHARACTER MODE.
IF sy-subrc = 0. " SY-SUBRC is always 4 here - why?! :(
ENDIF.
CLEAR: lv_string,
lt_result.
ENDFORM. " GET_SUBTASK
Only when the string LV_SUMMARY is edited from within the debugger (add space to the string prefix, etc), the SY-SUBRC will be 0 and there'll be data found in LT_RESULT.
How can I resolve this issue? Please do help. Thanks.I think the subtle difference is that in your first example the character is actually '#' whereas in the second example it is actually another (unprintable)value such-as line-feed and only APPEARS to be '#'.
You must find out what the value in question is(will it always be the same value?) and then replace that instead of '#'. -
I dont post here often but after a few days of trying different things I am at a loss so here it goes:
Previous Machine: c2009 Dell, Windows 7 Home Premium
New Machine: late 2012 iMac, OS X Mavericks, Parallels 10 Installed
Both computers connected to existing business network via ethernet. All firewalls and updates are disabled on both computers, screen savers and sleep modes are also disabled.
The first strategy was to transfer data using the Parallels Migration Wizard. The wizard finds the PC and begins the transfer, but gets to about 1/5 progress and hangs/ stops every time in the same spot. I disabled everything (firewall, etc.) I can think of on the windows PC and it still hangs in the same place every time.
The second strategy was to use the Migration Assistant that came on the iMac. The computers fail to find each other every time. so I haven't been able to even start the process. Searching on the iMac Network folder I can find and access the Dell (after changing security settings on the Dell to allow this). From the Dell Network folder I am not able to find or access the iMac.
So, I have submitted a help request to Parallels to see what they can do to help, but I also wanted to reach out here in case someone has experienced this before.
ThanksMigration Assistant - Windows
-
Untrusted Forest Discovery failed
I'm having a issue with remote untrusted forest. Forest Discovery fails, but I can publish site server information to this forest.
ERROR: [ForestDiscoveryAgent]: Failed to connect to forest domain.com. This can be because of disjoint DNS namespaces, network connectivity or server availibility issue. Error Information The specified forest does not exist or cannot be contacted.
Entering function ReportForestConnectionFailureStatusMessage()
Calling ReportStatus, keys= SMS_AD_FOREST_DISCOVERY_MANAGER, -2147474744, 2
I have configured conditional forwarders between forests and name resolution works. There shouldn't be any firewall issues either and I tested SRV records via nslookup with this method
Type nslookup, and then press ENTER.
Type set type=all, and then press ENTER.
Type _ldap._tcp.dc._msdcs.<var>Domain_Name</var>, where <var>Domain_Name</var> is the name of your domain, and then press ENTER.
Nslookup lists correct domain controllers from remote forest.
Any ideas what could be causing this? I think it's AD related problem.LDAP://DCNAME.domain.com/OU=Computers,DC=domain,DC=com
I tested this last week and this works. Now I can discover computer objects from untrusted forest. There must be something wrong with the ad/dns infrastructure becasue
normally you dont need to specify domain controller directly because it should find it with srvlookup. -
WCF application discovery failed
Hi,
I am using SCOM 2012 R2.
APM was configured.
The following events are raising for APM (only for 3 servers):
Description:
WCF application discovery failed because of the following exception: System.IO.FileNotFoundException: Could not load file or assembly 'Microsoft.Mom.Common, Version=7.0.5000.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies.
The system cannot find the file specified.
File name: 'Microsoft.Mom.Common, Version=7.0.5000.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'
at Microsoft.EnterpriseManagement.Modules.Apm.Discovery.Wcf.IIS2008WcfApplication.GetSCOMDiscoveryClassInstance(String computerName)
at Microsoft.EnterpriseManagement.Modules.Apm.Discovery.Wcf.WcfApplicationCollection.GetDiscoveryData(String computerName, DiscoverySourceType type, Guid discoverySourceId, Guid discoverySourceMEId)
at Microsoft.EnterpriseManagement.Modules.Apm.Discovery.Wcf.WcfDiscoveryProbe.ProcessDataItem(DataItemBase dataItem, DataItemAcknowledgementCallback acknowledgedCallback, Object acknowledgedState, DataItemProcessingCompleteCallback completionCallback, Object
completionState
I searched the web, but nothing about APM.
Thanks in advance!Hello SCCMadmin09,
Is there anything special about those failing agents? E.g. version of the agents is a bit different from the others?
I remember something about removing dependency on Microsoft.Mom.Common a while back, so if a workflow from old version tries to execute on the box with new version without this dependency - it'll fail.
You can check the presence of this file in C:\Windows\Assembly and in C:\Program Files\Microsoft Monitoring Agent - if it's not there, then agent is of a version where it was already removed.
If the issues is indeed in the versioning - then the fix should be a matter of a proper update of Agent-SCOM combination and/or maybe some MPs.
That's all theories, of course... I hope this helps at least a bit.
Dmitry Matveev -
Hi there
Trying to patch a new Windows 7 SP1 image within SCCM 2012 SP1, but it's failing.
I've searched for information on the failure messages I am seeing, but although there is a LOT of information online concerning Offline Servicing failures, I can't find anything on the errors I am seeing.
I've tried injecting a single update, five updates and ten updates, no difference, same messages.
We have McAfee Access Protection disabled, as we know Offline Servicing simply won't work if this is running.
In the console, in Schedule Update Status for the image I am trying to update, the following message is shown:
"Failed to find or access the update binaries to be applied on the image."
That sounds as if the process can't find the actual .cab file for any update I've tried to inject, but I don't know why it wouldn't be able to do that, we have Software Updates configured and the .cab files are on the same server.
When I looked at the OfflineServicingMgr.log file, I see the following entries:
Processing image at index 1 SMS_OFFLINE_SERVICING_MANAGER 14/06/2014 14:52:49 8272 (0x2050)
Mounting image at index 1. Image file='D:\ConfigMgr_OfflineImageServicing\PackageID\W7_Image.wim', MountDirectory='D:\ConfigMgr_OfflineImageServicing\PackageID\ImageMountDir', ImageFileType='WIM', Mode='ReadWrite' SMS_OFFLINE_SERVICING_MANAGER
14/06/2014 14:52:49 8272 (0x2050)
Image OS information : MajorVersionMS = 6, MinorVersionMS = 1, MajorVersionLS = 7601, MinorVersionLS = 17514 SMS_OFFLINE_SERVICING_MANAGER 14/06/2014 14:53:31
8272 (0x2050)
Failed to find properties of file 4 SMS_OFFLINE_SERVICING_MANAGER 14/06/2014 14:53:31 8272 (0x2050)
UnMounting Image (Commit Changes = 0) ... SMS_OFFLINE_SERVICING_MANAGER 14/06/2014 14:53:31 8272 (0x2050)
Completed processing image package PackageID. Status = Failed SMS_OFFLINE_SERVICING_MANAGER 14/06/2014 14:54:04 8272 (0x2050)
Updated history for image package PackageID in the database SMS_OFFLINE_SERVICING_MANAGER 14/06/2014 14:54:04 8272 (0x2050)
Schedule processing failed SMS_OFFLINE_SERVICING_MANAGER 14/06/2014 14:54:04 8272 (0x2050)
Processing completed for Schedule with ID 16777237 SMS_OFFLINE_SERVICING_MANAGER 14/06/2014 14:54:04 8272 (0x2050)
STATMSG: ID=7910 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_OFFLINE_SERVICING_MANAGER" SYS=SCCMServer.domain SITE=Site_Code PID=8560 TID=8272 GMTDATE=Sat Jun 14 13:54:04.964 2014 ISTR0="16777237" ISTR1="" ISTR2=""
ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0 SMS_OFFLINE_SERVICING_MANAGER
14/06/2014 14:54:04 8272 (0x2050)
Schedule processing thread stopped SMS_OFFLINE_SERVICING_MANAGER 14/06/2014 14:54:05 8272 (0x2050)
I'm not sure what file "Failed to find properties of file 4" is referring to, whether dism.exe, an update or the image itself, but immediately after this message appears the image is unmounted. After that this message shows:
"Completed processing image package PackageID. Status = Failed"
As I say, there's a lot of information available re Offline Servicing but I haven't found anything with these particular messages.
If anyone has encountered this before, I'd appreciate any information you have.
Regards,
John.Hi,
I think file named 'NO_SMS_ON_DRIVE.SMS’ might be causing this issue. If this file is present in logical drives, then please give it a shot one more time after deleting this file from the logical drives.
Due to this file, it might be preventing 'smsexec' service to skip the drive when looking for content. So worth a try!
After deleting this file, you also need to restart 'smsexec' service to reflect the changes. You can also verify from below registry value & ensure that all of your logical drives (specially where SCCMContentLib directory resides) should be listed
over there
'HKLM\Software\Microsoft\SMS\DP\ContentLibUsableDrives'
Hope this will help!
Cheers | Navdeep Sidhu -
Windows 8.1 not booting : "Boot manager failed to find OS loader"
Hello all,
I know this question came up before, but I have being trying to fix this for many days now, without luck and I feel I need some new ideas...
The short story:
My Windows 8.1 is not booting, and gets trapped in cycle of Boot Manager until I tell the UEFI to boot from disk or USB
I can boot up from external CD or USB Windows RE, from which I can get to prompt line
In the log file in C:\Windows\System 32\LogFiles\Srt\SrtTrail.txt I read:
Boot manager failed to find OS loader
Repair Action File Repair à Failed (err code 0x4001)
Repair Action Boot Config Data Store Repair à Failed (err code 0x2)
4. My disk is GPT partitioned, with UEFI Bios
5. I tried the typical Bootrec commands: FixMbr, FixBoot, ScanOs, RebuildBCD but I always get the error:
Identified Windows install:0
6. I tried Bcdedit but I get:
the boot configuration data (BCD) store could not be opened
7. I tried to create a new BCD store in the FAT32 partition (temporarily named "v:\") with
bcdboot c:\Windows /l en-gb /s v: /f ALL
but I get:
Failure when attempted to copy boot files
8. Finally, I noticed that in
C:\Windows\System32\
I DO NOT have the file winload.efi
while in: ESP\EFI\Microsoft\Boot\
I DO have the file Bootmgfw.efi
One question I have is: Is it possible to copy a "healthy" winload.efi from somewhere in my PC into C:\Windows\System32\ ?
Where (which path) could I find it?
Any other ideas? Please help !!!!
Many thanks!! This is literarily driving me crazy because I really don't want to reinstall windows....Hello Kermit_70,
What is your current situation?
Please try the suggestion as aw00t mentioned.
Additionally, please try to use Automatic Repair to fix problems that keep Windows from loading.
For more information, please take a look at the following article.
http://www.eightforums.com/tutorials/2269-system-recovery-options-boot-windows-8-a.html
Please note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Best regards,
Fangzhou CHEN
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
"failed to find profile ID" on Cellular Interface
Hello World,
I try to make a connection to a Wirelless 3G.
I configure modem and I think that the modem is connected
show cellular 0/0/0 all
Hardware Information
====================
Modem Firmware Version = T1_0_3_2AP R361 CNSZ
Modem Firmware built = 04/15/11
Hardware Version = 1.0
International Mobile Subscriber Identity (IMSI) = 546010100686679
International Mobile Equipment Identity (IMEI) = 357115041341178
Integrated Circuit Card ID (ICCID) = 8968701111106200287
Mobile Subscriber International Subscriber
IDentity Number (MSISDN) =
Factory Serial Number (FSN) = CC3322315641011
Modem Status = Online
Current Modem Temperature = 29 deg C, State = Normal
PRI SKU ID = 9900198, SKU Rev. = 1.2
Profile Information
====================
Profile 1 = INACTIVE* **
PDP Type = IPv4
Access Point Name (APN) = USB
Authentication = None
Username:
Password:
* - Default profile
Data Connection Information
===========================
Data Transmitted = 0 bytes, Received = 0 bytes
Profile 1, Packet Session Status = INACTIVE
Inactivity Reason = Normal inactivate state
Profile 2, Packet Session Status = INACTIVE
Inactivity Reason = Normal inactivate state
Profile 3, Packet Session Status = INACTIVE
Inactivity Reason = Normal inactivate state
Profile 4, Packet Session Status = INACTIVE
Inactivity Reason = Normal inactivate state
Profile 5, Packet Session Status = INACTIVE
Inactivity Reason = Normal inactivate state
Profile 6, Packet Session Status = INACTIVE
Inactivity Reason = Normal inactivate state
Profile 7, Packet Session Status = INACTIVE
Inactivity Reason = Normal inactivate state
Profile 8, Packet Session Status = INACTIVE
Inactivity Reason = Normal inactivate state
Profile 9, Packet Session Status = INACTIVE
Inactivity Reason = Normal inactivate state
Profile 10, Packet Session Status = INACTIVE
Inactivity Reason = Normal inactivate state
Profile 11, Packet Session Status = INACTIVE
Inactivity Reason = Normal inactivate state
Profile 12, Packet Session Status = INACTIVE
Inactivity Reason = Normal inactivate state
Profile 13, Packet Session Status = INACTIVE
Inactivity Reason = Normal inactivate state
Profile 14, Packet Session Status = INACTIVE
Inactivity Reason = Normal inactivate state
Profile 15, Packet Session Status = INACTIVE
Inactivity Reason = Normal inactivate state
Profile 16, Packet Session Status = INACTIVE
Inactivity Reason = Normal inactivate state
Network Information
===================
Current Service Status = Normal, Service Error = None
Current Service = Combined
Packet Service = UMTS/WCDMA (Attached)
Packet Session Status = Inactive
Current Roaming Status = Home
Network Selection Mode = Automatic
Country = NCL, Network = MOBNCL
Mobile Country Code (MCC) = 546
Mobile Network Code (MNC) = 1
Location Area Code (LAC) = 10
Routing Area Code (RAC) = 1
Cell ID = 30521
Primary Scrambling Code = 434
PLMN Selection = Automatic
Registered PLMN = NCL MOBILIS , Abbreviated = MOBNCL
Service Provider =
Radio Information
=================
Radio power mode = ON
Current Band = WCDMA 2100, Channel Number = 10762
Current RSSI(RSCP) = -63 dBm
Band Selected = Auto
Number of nearby cells = 1
Cell 1
Primary Scrambling Code = 0x1B2
RSCP = -64 dBm, ECIO = -7 dBm
Modem Security Information
==========================
Card Holder Verification (CHV1) = Disabled
SIM Status = OK
SIM User Operation Required = None
Number of CHV1 Retries remaining = 3
GPS Information
==========================
GPS Info
GPS State: GPS disabled
SMS Information
===============
Incoming Message Information
SMS stored in modem = 1
SMS archived since booting up = 0
Total SMS deleted since booting up = 0
Storage records allocated = 60
Storage records used = 1
Number of callbacks triggered by SMS = 0
Number of successful archive since booting up = 0
Number of failed archive since booting up = 0
Outgoing Message Information
Total SMS sent successfully = 0
Total SMS send failure = 0
Number of outgoing SMS pending = 0
Number of successful archive since booting up = 0
Number of failed archive since booting up = 0
Last Outgoing SMS Status = SUCCESS
Copy-to-SIM Status = 0x0
Send-to-Network Status = 0x0
Report-Outgoing-Message-Number:
Reference Number = 0
Result Code = 0x0
Diag Code = 0x0 0x0 0x0 0x0 0x0
SMS Archive URL =
Error Information
=================
Cached info is displayed
at!err
QDSP6 ARM9 (not saved)
00 08 uim 08480 00 01 hsu_conf_sel_nv 00572
01 63 gsnvif 00245 01 01 hsu_conf_sel_nv 00616
02 FF cmtask 01162 02 01 timer 03552
03 1B mmglbl 00392
04 1B gsnvif 00478
05 1B rr_init 01597
06 1B rr_init 01601
07 1B rrcdata 08026
08 01 gmmutil 01099
09 01 gmmutil 01118
10 01 gmmutil 01141
11 01 gmmutil 01156
12 01 gmmutil 01174
13 01 gmmutil 01198
14 14 rrcllcp 16550
15 04 rrccspf 02198
16 17 rrccsp 20686
17 04 gsdi 09787
18 01 gsdi_co 01538
19 1B cnlbs 03307
OK
at!gcdump
No crash data available
OK
Modem Crashdump Information
===========================
Modem crashdump logging: off
I have the following config
chat-script OPT3G "" "ATDT*99***1#"
interface Cellular0/0/0
ip address negotiated
ip virtual-reassembly in
encapsulation slip
no ip route-cache
load-interval 60
dialer in-band
dialer string OPT3G
dialer-group 1
async mode interactive
interface Cellular0/0/1
no ip address
encapsulation slip
ip forward-protocol nd
no ip http server
no ip http secure-server
ip route 0.0.0.0 0.0.0.0 Cellular0/0/0
dialer-list 1 protocol ip permit
access-list 1 permit any
line 0/0/0
exec-timeout 0 0
script dialer OPT3G
login
modem InOut
no exec
transport input all
transport output all
autoselect during-login
autoselect ppp
line 0/0/1
exec-timeout 0 0
script dialer OPT3G
login
modem InOut
no exec
transport input all
I make debug
debug chat
debug cellular 0/0/0 messages all
I try to start the interface
Sending 5, 100-byte ICMP Echos to 8.8.8.8, timeout is 2 seconds:
*Jul 22 07:08:31.363: [Cellular0/0/0]:MGMT RX (RSCP_ECIO) (24 bytes):
00 14 6B 96 70 0B 07 00 00 00 00 00 00 0A 00 01
00 01 01 B2 00 3E 00 0D
*Jul 22 07:08:32.283: CHAT0/0/0: Attempting async line dialer script
*Jul 22 07:08:32.283: CHAT0/0/0: Dialing using Modem script: OPT3G & System script: none
*Jul 22 07:08:32.283: CHAT0/0/0: process started
*Jul 22 07:08:32.283: CHAT0/0/0: Asserting DTR
*Jul 22 07:08:32.283: CHAT0/0/0: Chat script OPT3G started
*Jul 22 07:08:32.283: CHAT0/0/0: Sending string: ATDT*99***1#
*Jul 22 07:08:32.283: CHAT0/0/0: Chat script OPT3G finished, status = Success.
*Jul 22 07:08:34.283: %LINK-3-UPDOWN: Interface Cellular0/0/0, changed state to up
*Jul 22 07:08:34.283: cellular_dip_ip_address_negotiated: failed to find profile ID for Cellular0/0/0
*Jul 22 07:08:34.363: [Cellular0/0/0]:MGMT RX (RSCP_ECIO) (24 bytes):
00 14 6B 97 70 0B 07 00 00 00 00 00 00 0A 00 01
00 01 01 B2 00 3F 00 0C
*Jul 22 07:08:35.283: %LINEPROTO-5-UPDOWN: Line protocol on Interface Cellular0/0/0, changed state to up.
*Jul 22 07:08:36.283: cellular_dip_cell_set_encap_whip: Invalid profile ID 255 for Cellular0/0/0
*Jul 22 07:08:36.835: [Cellular0/0/0]:MGMT RX (HEARTBEAT) (14 bytes):
00 0A 6B 98 00 00 07 00 00 00 00 00 00 00
*Jul 22 07:08:37.363: [Cellular0/0/0]:MGMT RX (RSCP_ECIO) (24 bytes):
00 14 6B 99 70 0B 07 00 00 00 00 00 00 0A 00 01
00 01 01 B2 00 3E 00 0C
*Jul 22 07:08:38.283: cellular_dip_cell_set_encap_whip: Invalid profile ID 255 for Cellular0/0/0.
*Jul 22 07:08:40.283: cellular_dip_cell_set_encap_whip: Invalid profile ID 255 for Cellular0/0/0
*Jul 22 07:08:40.367: [Cellular0/0/0]:MGMT RX (RSCP_ECIO) (24 bytes):
00 14 6B 9A 70 0B 07 00 00 00 00 00 00 0A 00 01
00 01 01 B2 00 40 00 0F
Success rate is 0 percent (0/5)
RTR-TEST98#
*Jul 22 07:08:43.371: [Cellular0/0/0]:MGMT RX (RSCP_ECIO) (24 bytes):
00 14 6B 9B 70 0B 07 00 00 00 00 00 00 0A 00 01
00 01 01 B2 00 3C 00 11
*Jul 22 07:08:43.835: [Cellular0/0/0]:MGMT RX (HEARTBEAT) (14 bytes):
00 0A 6B 9C 00 00 07 00 00 00 00 00 00 00
*Jul 22 07:08:46.375: [Cellular0/0/0]:MGMT RX (RSCP_ECIO) (24 bytes):
00 14 6B 9D 70 0B 07 00 00 00 00 00 00 0A 00 01
00 01 01 B2 00 3E 00 0D
*Jul 22 07:08:49.379: [Cellular0/0/0]:MGMT RX (RSCP_ECIO) (24 bytes):
00 14 6B 9E 70 0B 07 00 00 00 00 00 00 0A 00 01
00 01 01 B2 00 3E 00 0C
*Jul 22 07:08:50.835: [Cellular0/0/0]:MGMT RX (HEARTBEAT) (14 bytes):
00 0A 6B 9F 00 00 07 00 00 00 00 00 00 00
*Jul 22 07:08:52.383: [Cellular0/0/0]:MGMT RX (RSCP_ECIO) (24 bytes):
00 14 6B A0 70 0B 07 00 00 00 00 00 00 0A 00 01
00 01 01 B2 00 3E 00 0Ehello everyone,
I still have my issue and can't connect my 3G interface.
I can complete my issue with this log
*Aug 12 08:35:34.023: cellular_dip_ip_address_negotiated: failed to find profile ID for Cellular0/0/0
*Aug 12 08:35:38.019: cellular_dip_cell_set_encap_whip: Invalid profile ID 255 for Cellular0/0/0
Thank's for your help. -
SP3 Upgrade fails to find Weblogic Server 6.1 installed
Hello,
I have just downloaded SP3 for WLS 6.1. The machine´s im trying to install it on
are a Sun box with solaris 8 and an intel box with redhat 7.2, the problem im encounting,
when i install the service pack, is that the installer fails to find my install of
weblogic 6.1 (on both machines its a default install /bea/wlserver6.1/). I have tried
several ways of installing it, and all so far have failed. Anyone else had this problem
Thanks
Bobby
Below is a snippet of the install .
Choose BEA Home Directory
1- /bea
Existing BEA Home: 1
===============================================================================
WebLogic Server 6.1 not found
WebLogic Server Service Pack 3 Installation failed.
You do not seem to have WebLogic Server 6.1
installed for BEAHOME /bea.
Exiting the Service Pack 3 installer...:I had the same problem , the solution I found was to edit the file registry.xml (in
the same directory as the license file).
In my case the installation files where copied from another installation and had
the wrong information in the registry.xml about paths and machine name
Regards
Ulf
"Bobby" <[email protected]> wrote:
>
Hello,
I have just downloaded SP3 for WLS 6.1. The machine´s im trying to install
it on
are a Sun box with solaris 8 and an intel box with redhat 7.2, the problem
im encounting,
when i install the service pack, is that the installer fails to find my
install of
weblogic 6.1 (on both machines its a default install /bea/wlserver6.1/).
I have tried
several ways of installing it, and all so far have failed. Anyone else had
this problem
Thanks
Bobby
Below is a snippet of the install .
Choose BEA Home Directory
1- /bea
Existing BEA Home: 1
===============================================================================
WebLogic Server 6.1 not found
WebLogic Server Service Pack 3 Installation failed.
You do not seem to have WebLogic Server 6.1
installed for BEAHOME /bea.
Exiting the Service Pack 3 installer...: -
Offline Servicing of OS fails (failed to find properties of file 5)
Hi,
I'm unable to get the Offline Update Servicing of the OS to work. In the OfflineServicingMgr.log I Keep getting:
Failed to get update applicability. Dism.exe command line is below:"C:\Windows\system32\cmd.exe" /q /c ""D:\Microsoft\Windows Kits\8.1\Assessment and Deployment Kit\Deployment Tools\amd64\DISM\dism.exe" /Image:"D:\ConfigMgr_OfflineImageServicing\I0100042\ImageMountDir" /LogPath:%WINDIR%\Logs\Dism\dism_sccmAMD64.log /English /Get-PackageInfo /Packagepath:"D:\ConfigMgr_OfflineImageServicing\fc1721b9-7ee8-44a6-9842-b7d89596f126\KB2890660.cab">>D:\ConfigMgr_OfflineImageServicing\I0100042\[email protected]"
after this happened 5 times I get the following:
Failed to find properties of file 5
UnMounting Image (Commit Changes = 0) ...
Completed processing image package I0100042. Status = Failed
I also checked the dism_sccmAMD64.log but can't find a solution to this Problem, there are to much Errors in there.
dism_sccmAMD64.log:
2014-08-27 10:34:49, Info DPX Started DPX phase: Apply Deltas Provided In File
2014-08-27 10:34:49, Info DPX File could not be expanded, Source=update.mum, Target=(null), status=0x80070002
2014-08-27 10:34:49, Info DPX ProvideRequestedDataByFile failed, Response file Name: \\?\D:\ConfigMgr_OfflineImageServicing\7e1f745c-af8b-47a6-a3e0-41288d29c831\Windows8.1-KB2898464-x64.cab
2014-08-27 10:34:49, Info DPX Ended DPX phase: Apply Deltas Provided In File
2014-08-27 10:34:49, Info DPX DpxException hr=0x80070002 code=0x020102
2014-08-27 10:34:49, Info DPX Ended DPX phase: Resume and Download Job
2014-08-27 10:34:49, Info DPX DpxException hr=0x80070002 code=0x020217
2014-08-27 10:34:49, Info CBS Failed to extract file update.mum from cabinet \\?\D:\ConfigMgr_OfflineImageServicing\7e1f745c-af8b-47a6-a3e0-41288d29c831\Windows8.1-KB2898464-x64.cab [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
2014-08-27 10:34:49, Info CBS Failed to extract package manifest from cabinet [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
2014-08-27 10:34:49, Info CBS Failed to initialize internal package [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
2014-08-27 10:34:49, Error CBS Failed to create internal package [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
2014-08-27 10:34:49, Error DISM DISM Package Manager: PID=7840 TID=31584 Failed opening package. - CDISMPackageManager::Internal_CreatePackageByPath(hr:0x80070002)
2014-08-27 10:34:49, Error DISM DISM Package Manager: PID=7840 TID=31584 Failed to get the underlying CBS package. - CDISMPackageManager::OpenPackageByPath(hr:0x80070002)
2014-08-27 10:34:49, Error DISM DISM Package Manager: PID=7840 TID=31584 Failed to open the package at location: "D:\ConfigMgr_OfflineImageServicing\7e1f745c-af8b-47a6-a3e0-41288d29c831\Windows8.1-KB2898464-x64.cab" - CPackageManagerCLIHandler::ProcessPackagePath(hr:0x80070002)
2014-08-27 10:34:49, Error DISM DISM Package Manager: PID=7840 TID=31584 Failed to get the list of packages from the command line. - CPackageManagerCLIHandler::ProcessCmdLine_GetPackageInfo(hr:0x80070002)
2014-08-27 10:34:49, Error DISM DISM Package Manager: PID=7840 TID=31584 Failed while processing command get-packageinfo. - CPackageManagerCLIHandler::ExecuteCmdLine(hr:0x80070002)
2014-08-27 10:34:49, Error DISM DISM.EXE: DISM Package Manager processed the command line but failed. HRESULT=80070002
2014-08-27 10:34:49, Info DISM DISM Provider Store: PID=7840 TID=31584 Found the OSServices. Waiting to finalize it until all other providers are unloaded. - CDISMProviderStore::Final_OnDisconnect
2014-08-27 10:34:49, Info DISM DISM Provider Store: PID=7840 TID=31584 Found the OSServices. Waiting to finalize it until all other providers are unloaded. - CDISMProviderStore::Final_OnDisconnect
2014-08-27 10:34:49, Info DISM DISM Provider Store: PID=7840 TID=31584 Found the PE Provider. Waiting to finalize it until all other providers are unloaded. - CDISMProviderStore::Final_OnDisconnect
2014-08-27 10:34:49, Info DISM DISM Provider Store: PID=7840 TID=31584 Finalizing the servicing provider(DISM Package Manager) - CDISMProviderStore::Internal_DisconnectProvider
2014-08-27 10:34:49, Info CBS Unloading offline registry hive: {bf1a281b-ad7b-4476-ac95-f47682990ce7}D:/ConfigMgr_OfflineImageServicing/I0100042/ImageMountDir/Windows/System32/config/SOFTWARE
2014-08-27 10:34:49, Info CBS Failed to unload offline registry: {bf1a281b-ad7b-4476-ac95-f47682990ce7}D:/ConfigMgr_OfflineImageServicing/I0100042/ImageMountDir/Windows/System32/config/SOFTWARE, the client may still need it open. [HRESULT = 0x80070005 - E_ACCESSDENIED]
2014-08-27 10:34:49, Info CBS Unloading offline registry hive: {bf1a281b-ad7b-4476-ac95-f47682990ce7}D:/ConfigMgr_OfflineImageServicing/I0100042/ImageMountDir/Windows/System32/config/SYSTEM
2014-08-27 10:34:49, Info CBS Failed to unload offline registry: {bf1a281b-ad7b-4476-ac95-f47682990ce7}D:/ConfigMgr_OfflineImageServicing/I0100042/ImageMountDir/Windows/System32/config/SYSTEM, the client may still need it open. [HRESULT = 0x80070005 - E_ACCESSDENIED]
2014-08-27 10:34:49, Info CBS Unloading offline registry hive: {bf1a281b-ad7b-4476-ac95-f47682990ce7}D:/ConfigMgr_OfflineImageServicing/I0100042/ImageMountDir/Windows/System32/config/SECURITY
2014-08-27 10:34:49, Info CBS Failed to unload offline registry: {bf1a281b-ad7b-4476-ac95-f47682990ce7}D:/ConfigMgr_OfflineImageServicing/I0100042/ImageMountDir/Windows/System32/config/SECURITY, the client may still need it open. [HRESULT = 0x80070005 - E_ACCESSDENIED]
2014-08-27 10:34:49, Info CBS Unloading offline registry hive: {bf1a281b-ad7b-4476-ac95-f47682990ce7}D:/ConfigMgr_OfflineImageServicing/I0100042/ImageMountDir/Windows/System32/config/SAM
2014-08-27 10:34:49, Info CBS Failed to unload offline registry: {bf1a281b-ad7b-4476-ac95-f47682990ce7}D:/ConfigMgr_OfflineImageServicing/I0100042/ImageMountDir/Windows/System32/config/SAM, the client may still need it open. [HRESULT = 0x80070005 - E_ACCESSDENIED]
2014-08-27 10:34:49, Info CBS Unloading offline registry hive: {bf1a281b-ad7b-4476-ac95-f47682990ce7}D:/ConfigMgr_OfflineImageServicing/I0100042/ImageMountDir/Windows/System32/config/COMPONENTS
2014-08-27 10:34:49, Info CBS Failed to unload offline registry: {bf1a281b-ad7b-4476-ac95-f47682990ce7}D:/ConfigMgr_OfflineImageServicing/I0100042/ImageMountDir/Windows/System32/config/COMPONENTS, the client may still need it open. [HRESULT = 0x80070005 - E_ACCESSDENIED]
2014-08-27 10:34:49, Info CBS Unloading offline registry hive: {bf1a281b-ad7b-4476-ac95-f47682990ce7}D:/ConfigMgr_OfflineImageServicing/I0100042/ImageMountDir/Windows/System32/config/DEFAULT
2014-08-27 10:34:49, Info CBS Failed to unload offline registry: {bf1a281b-ad7b-4476-ac95-f47682990ce7}D:/ConfigMgr_OfflineImageServicing/I0100042/ImageMountDir/Windows/System32/config/DEFAULT, the client may still need it open. [HRESULT = 0x80070005 - E_ACCESSDENIED]
2014-08-27 10:34:49, Info CBS Unloading offline registry hive: {bf1a281b-ad7b-4476-ac95-f47682990ce7}D:/ConfigMgr_OfflineImageServicing/I0100042/ImageMountDir/Users/default/ntuser.dat
2014-08-27 10:34:49, Info CBS Failed to unload offline registry: {bf1a281b-ad7b-4476-ac95-f47682990ce7}D:/ConfigMgr_OfflineImageServicing/I0100042/ImageMountDir/Users/default/ntuser.dat, the client may still need it open. [HRESULT = 0x80070005 - E_ACCESSDENIED]
2014-08-27 10:34:49, Info CBS Unloading offline registry hive: {bf1a281b-ad7b-4476-ac95-f47682990ce7}D:/ConfigMgr_OfflineImageServicing/I0100042/ImageMountDir/Windows/system32/smi/store/Machine/schema.datRight before, the error you mentioned, I see a couple of file not found message. You might want to check those, still it can be anything from a file that doesn't exist till too little disk space.
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude -
Real racing 3 - error, failed to find players
Hi, first time here.
love RR3 but the online multiplayer can be a pain.
at times when I try to race it will be fine, but then often after a race when I want to race again it comes up with 'error, failed to find players', and once that happens I have to leave the game for a while, turn ipad off and on or reset ipad to be allowed to race again. This is with online multiplayer only, everything else works well. No perceived problems with game centre synching or my internet.
any ideas?
david.Hey Bendigodave,
One thing that may be happening is one or more of the players you just played with has left the party. If you mean when you exit out of a party and start another matchmaking, then you first want to check your internet speed and connection. you can download a speed test app for that. Secondly, a nice fresh start for your Game Center account may help. Signing out of Game Center by going to Settings>Game Center> Tapping on your blue apple ID and signing out, then signing back in. Maybe that will help something out? If not, make sure you're updated to the latest version of the app and iPad. 7.0.3 is a couple versions behind. iPads are currently on 7.1.2. If all else fails, contact EA about it. they have excellent customer service. I hope this helps! -
ODC: ERROR PKIX path building failed: to find valid certification path
Hi to all,
some one has experienced the error: PKIX path building failed: to find valid certification path to request target.... on the ODC while trying to connect
we solved temporally adding the ssl to the java virtual machine, is there a path in the odc to set the ssl ?
ODC 10.350
Thanks!If you are trying to connect to UCM via SSL , Please check below note
ODC - Errors Attempting to Connect to UCM Configured Through SSL (Doc ID 793137.1) -
I have a 2009 MB Pro. I have been trying to do some cleaning of files and discovered that in Finder, All Images, I am experiencing a frustrating problem. I spent a few hours trashing over 4K images and within a few hours, I had as many more. I did a couple of thousand trashed images and half hour later, more arrived. There are a lot of images that seem off the internet, including gif.s, png.s. Help!
First, back up all data immediately, as your boot drive might be failing.
There are a few other possible causes of generalized slow performance that you can rule out easily.
Reset the System Management Controller.
If you have many image or video files on the Desktop with preview icons, move them to another folder.
If applicable, uncheck all boxes in the iCloud preference pane.
Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
Check your keychains in Keychain Access for excessively duplicated items.
If you have more than one user account, you must be logged in as an administrator to carry out this step.
Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long. -
Spatial query to find all partially aligned lines
Hi There.
I need to find all partially aligned polylines in the layer (interiors have 1-dimentionali intersection). Actually, polylies may a little fluctuate along each other, but that spatial disjointment shouldn't exceed some certain tolerance. It doesn't matter if polylines are touching each other or cover.
What spatial operators/functions will you suggest to use to perform that stuff?
For example next lines for me are partially aligned in tolerance 0.01 (query result is TOUCH):
select sdo_geom.relate(
mdsys.sdo_geometry(2002,null,null, mdsys.sdo_elem_info_array(1,2,1), mdsys.sdo_ordinate_array(1,1,4,4)),
'determine',
mdsys.sdo_geometry(2002,null,null, mdsys.sdo_elem_info_array(1,2,1), mdsys.sdo_ordinate_array(1.1,1,3.015,3)),
0.01) relationship
from dual;
Note: I can't use buffers because it isn't stable for me :( see: SDO_GEOM.SDO_BUFFER failed with ORA-13050
Thank you in advance, Denis.Thank you for quick response!
The lines are valid at that tolerance.
I think that TOUCH+COVERS+COVEREDBY will not be sufficient for me. Because I'm interested in next cases: OVERLAPBDYINTERSECT, INSIDE, CONTAINS, COVERS (any operator which includes overlapping for lines). I can use union of all those masks, but TOUCH will return me many redundant candidates (Often lines are touch but not overlapping, like: (1,1,2,2) VS (2,2,3,3)). The TOUCH works for me if one poliline touches the other and goes along it some time (like I showed above). Hope I was clear :).
Maybe you are looking for
-
Setting up Sharepoint 2013 approval workflows depending on field value
Dear Microsoft Support, I am still relatively new to Sharepoint-Infopath and would need help with setting up workflows for a requisition form I am creating. I have designed and created a form using Infopath 2013 and have successfully created the link
-
Hi All, I have followed dozens of tutorials to set up roles for Hyper-V, but I keep coming up short. I have no problem managing the five domain-joined 2012 R2 Core Hyper-V servers we have remotely from my Windows 8.1 PC, but I have a lab box I would
-
Cannot view the detailed Email date and time about the meeting request
Hi,I am unable to view the detailed message and Date and time of a meeting request in the default Email app in my Sony Xperia P mobile. Even when i select the calender it does not defaultly go to the meeting date. I need to manually select the date t
-
How to create Manual Slideshow Button
Hi, I'm trying to have a manual slideshow controlled by a single simple arrow button to either advance or go back I've already converted my slideshow to track and on the first track/chapter marker I've selected Button Highlight Marker How do I now cr
-
T77HAP_EX has a missing entry AA ORG_OBJECTIVES
Hi Experts, I am implementing SAP Pre-defined Performance template. I have run the IMG entry u201CConfigure Performance Management Processu201D but when I run this I get the message u201CAn unexpected technical error has occurredu201D. Selecting the