VSL Performance tool for EXS does not work in Logic 8?!

Is this true? http://community.vsl.co.at/forums/t/11356.aspx
If so, this is a deal breaker for me, as VSL is my bread and butter orchestral library! Supposedly Apple ensured the VSL team that their performance tools will work correctly in Logic 8, but some users are saying this is not the case!
Is there anyone successfully using the VSL performance tools in Logic 8? Particularly the Legato tool?

bump?

Similar Messages

Bridge CC Tools - Photoshop - Batch does not work in Photoshop CC 2014.

in Bridge CC Tools - Photoshop - Batch does not work in Photoshop CC 2014. At first I didn't even see the option but I reinstalled Photoshop CC and now I see the menu option but when I try it there is a message that I need to use Photoshop CC. So I open Photoshop CC and the same thing happens? I can't seem to make it work.

Kitty,
Your screen shot is in the virus scanning queue, where it can linger for minutes, hours, days or weeks.
If you use the camera icon in the reply editor's formatting bar, you can embed your image in your post, where it will be viewable instantly.
then:
As for your issue, make sure all applicable scripts are checked in Bridge preferences:

Early Adopter release : Extract DDL for tables does not work

Hi,
just had a look at Raptor - really nice tool - easy install - could be a replacement for SQLnavigator for us. One or two things I noticed though ...
1)
Export->DDL for tables does not work throws following error
java.lang.ClassNotFoundException: oracle.dbtools.raptor.dialogs.actions.TableDMLExport
     at java.net.URLClassLoader$1.run(URLClassLoader.java:200)
     at java.security.AccessController.doPrivileged(Native Method)
     at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
     at oracle.ideimpl.IdeClassLoader.loadClass(IdeClassLoader.java:140)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
     at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:319)
     at java.lang.Class.forName0(Native Method)
     at java.lang.Class.forName(Class.java:164)
     at oracle.dbtools.raptor.dialogs.BasicObjectModifier.launch(BasicObjectModifier.java:142)
     at oracle.dbtools.raptor.dialogs.BasicObjectModifier.handleEvent(BasicObjectModifier.java:210)
     at oracle.dbtools.raptor.dialogs.actions.XMLBasedObjectAction$DefaultController.handleEvent(XMLBasedObjectAction.java:265)
     at oracle.ide.controller.IdeAction.performAction(IdeAction.java:530)
     at oracle.ide.controller.IdeAction$1.run(IdeAction.java:785)
     at oracle.ide.controller.IdeAction.actionPerformedImpl(IdeAction.java:804)
     at oracle.ide.controller.IdeAction.actionPerformed(IdeAction.java:499)
     at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1849)
     at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2169)
     at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:420)
     at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:258)
     at javax.swing.AbstractButton.doClick(AbstractButton.java:302)
     at javax.swing.plaf.basic.BasicMenuItemUI.doClick(BasicMenuItemUI.java:1000)
     at javax.swing.plaf.basic.BasicMenuItemUI$Handler.mouseReleased(BasicMenuItemUI.java:1041)
     at java.awt.Component.processMouseEvent(Component.java:5488)
     at javax.swing.JComponent.processMouseEvent(JComponent.java:3126)
     at java.awt.Component.processEvent(Component.java:5253)
     at java.awt.Container.processEvent(Container.java:1966)
     at java.awt.Component.dispatchEventImpl(Component.java:3955)
     at java.awt.Container.dispatchEventImpl(Container.java:2024)
     at java.awt.Component.dispatchEvent(Component.java:3803)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4212)
     at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3892)
     at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3822)
     at java.awt.Container.dispatchEventImpl(Container.java:2010)
     at java.awt.Window.dispatchEventImpl(Window.java:1774)
     at java.awt.Component.dispatchEvent(Component.java:3803)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:463)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)
and 2)
when I click on a package body - I get "loading ..." below it but it never puts the
procedure names in and the "loading ..."message stays in the tree view - however you do get to see the packages in the source window.
Realise this is very much a work in progress and am grateful to see an early release such as this. Looking forward to the production release.
Best regards,
David.

OK thanks for looking ....you've obviously got the fixes on your to do lists
Noticed that the SQL tab when you select an object works fine - displays the
DDL for the object
Do you think you'll have functionality so you can select many objects (shift left click) and
then create a DDL script for them? It looks like you can do this for all objects in a schema but
the ability to select a subset of objects in a schema would be very useful for our DBA's.
Couldn't see any good reason for keeping using SQLNavigator
Many congratulations on producing such a useful tool.
Kind regards,
David.

Short key for copy does not work all the time now.

After I have installed the latest OSX - Yosemite, my short key for copy does not work all the time. It is infrequent how it works. I'm using the same keyboard that I have always used, my wireless logitech keyboard for mac. Please help.

I've plugged in my default mac keyboard and the short key copy still does not work.

I purchased PSE 13 but have a Vista OS. It was suggested in this chat room that I download PSE 12. I did that & installed. The serial # for 13 does not work. Any thoughts on how I can get a number for PSE 12?

I purchased PSE 13 but have a Vista OS. It was suggested in this chat room that I download PSE 12. I did that & installed 12.
The serial # for 13 does not work. Any thoughts on how I can get a serial number for PSE 12?

Hi
There is a newer version of Resolution+ Plug-in released for an Qosmio X series
[Resolution+ Plug-in v 1.1.2004|http://eu.computers.toshiba-europe.com/innovation/download_driver_details.jsp?service=EU&selCategory =2&selFamily=381&selSeries=231&selProduct=7506&sel ShortMod=null&language=13&selOS=all&selType=400&ye arupload=&monthupload=&dayupload=&useDate=null&mod e=allMachines&search=&action=search&macId=&country =all&selectedLanguage=13&type=400&page=1&ID=82406& OSID=30&driverLanguage=42]
try it out...
If it has not been installed properly, try rebooting your computer and reverify.

Reflow in Adobe Reader for Android does not work

The reflow option in my Adobe reader for Android does not work. The PDF book I am trying to read is too wide to be legible when I fit it into the screen (even in landscape), but the reflow button doesn't change that. When I click it, nothing happens. The only thing I know to do is to uninstall and re-install, but that did not work. Any other tips or ideas?

Mehwish,
Thank you so much for responding, and so quickly. I appreciate it.
It does not appear as though the PDF I am trying to read would have an element in it that would block it from reflow, but that is always possible. It’s a textbook, and I understand that toward the end of the book there are some charts and diagrams, but I haven’t gotten to those chapters yet. So far, I’ve just been trying to use the Adobe Reader to read the introduction and first chapter and nothing I have done has made it reflow.
I’m enclosing a copy of the entire book. Perhaps you can uncover something in it that I didn’t see.
Thanks again for you help.
Stan
Dr. Stan G. Duncan
123 Sumner St.
Quincy, Massachusetts 02169
617-855-7539 (hm)
781-504-6875 (cell)
215-647-7583 (fax)
508-295-1630 (Ch)
<mailto:[email protected]> [email protected]
<http://homebynow.blogspot.com/> http://homebynow.blogspot.com
<http://www.huffingtonpost.com/stan-duncan> http://www.huffingtonpost.com/stan-duncan

The Help Tab (OSX ML) where you search for something does not work

If I click "Help" and then search "expand" it will show me where expand is. But in CS6 when I clicked it the command would go through and pull up the page to expand pixels. Instead, I have to go find it. It works in every other Adobe app I use except Photoshop CC.
I am on the latest version and on CC

Hi Peter
Thanks a lot for your help (and sorry for not having answered quicker, but my boss gave me a more urgent task last week...).
Anyway, I did what you suggested (re-importing into a brand new project), and then the search for synonyms really worked! But, being a sceptical person, I did the same with another project, and with that one, it did not work. So, what I did next was compare all the settings of these two projects, and I found a difference.
RH8 now contains a function that's called 'Teilzeichenfolgensuche' (I don't know the English expression, but have a look at the attached picture: this is a screen shot from the second page when I generate WebHelp). After having done several tests, I came to the following conclusions:
Search for synonyms does not work in HTML-Help, but it does work in WebHelp (and maybe others, but they are not relevant for me, so I did not test them);
Search for synonyms does only work, when the function 'Teilzeichenfolgensuche' is NOT activated.
Could maybe somebody test this, too, and post here whether my conclusions are really correct?
Btw: This fact is not mentioned in the RH-Manual; actually, this function 'Teilzeichenfolgensuche' is not even mentioned there (at least not in the German edition)!!!
Can hardly wait to see your feedback; thanks again for everybody's support!
Kurt

My email verification for psn does not work...

My email verification for psn does not work... [email protected] SORT IT OUT SONY.
Have had a ps4 since xmas day and am still yet to use it.

1. You must send access code to a phone number that can receive SMS
2. You can only use one phone number per iPad; cannot share one number with two devices

Antares autotune 4 graphic mode does not work in Logic

Has anyone found a workaround for the following issue:
Using Antares autotune 4 or 5 in Logic pro 8, I cannot use the graphical mode how it was intended. Using Cubase, I was able to launch the plugin, switch to graphic mode, and track the pitch vs time. This was useful to manually correct the pitch for each syllable. For some reason, this function does not work in Logic Pro 8. Any thoughts as to why? Am I doing something wrong? Please advise.

I haven't used AT in years, but I do still have AT 4.
Graphic mode works just fine here in Logic 8, and I'm still on Tiger as well, albeit 10.4.11
Not that you asked, but seriously, look into Melodyne. AT is so archaic as far as it's graphic mode is concerned. 30 seconds back with it and I can't seriously see why anyone would use that plug-in, other than maybe manual mode, for a quick "run a comb through it" fix.
Sorry I couldn't give you an answer as to why this is happening. have you contacted Antares?

ICal: 'Open in Address Book' Function for 'Attendees' does not Work

iCal lets you drag a Contact from Address Book to the 'Attendees' field of an iCal Event. (You can also put the information into the field by typing the first few letters of the person's name, and Address Book will automatically populate the field with contacts containing those letters.) When you click on a contact in 'Attendees' and select 'Open in Address Book', it is supposed to open the contact's information in Address Book (in case you needed their phone number, forgot their wife's name, etc.). In the previous version of iCal, this ALMOST worked; it would find someone in Address Book, but it would be the first person in your Address Book list with that first name; not always the person you wanted.
The problem now is that when you click on a contact in 'Attendees' and select 'Open in Address Book', it simply opens the Address Book application and stops there; it does not go to the contact's data in Address Book. I sent Apple feedback on this problem 3 years ago, and again a few months ago, but it still does not work correctly. Does this work correctly for anyone?

Mine actually performs the sync, but after a few rounds of syncing, some contacts get deleted, some get their photos removed, some get duplicated, and some get removed from groups. The sync basically puts my address book through a blender. I'm syncing both with MobileMe and Google. Well, that is I tried to. I've decided not to sync with Google since that's what seems to initiate the mess.

Hand tool using spacebar does not work to move an image

When using another tool on an image, I hit the spacebar to move around in the image but the Hand tool does not work.
I've renamed the folder 12.0 under %appdata%/roaming/adobe/Photoshop Elements and that works until I close Elements 12 and then reopen it.

Suggest that you delete preferences.
In Editor, expert tab, go to Edit>preferences>General. Look for this:
Reset, close PSE, launch again.

Apple software update for windows does not work properly

Apple software update does not work properly

I FIXED IT!! I can't believe it . I actually figured out how to make it work(well sort of). My Apple Software Updater now works (almost) perfectly and I just successfully downloaded and installed itunes 10.6.3.25 through it!!!
Ok , the way I see it, either the latest itunes update or the recent Windows Patch Tuesday on June 12th, 2012 must have inadvertently removed the Administrative Rights from the Apple Software Update Tool .lnk file.
So you must go to where the file resides on your hard drive - for me that was C:\Program Data\Microsoft\Windows\Start Menu\Programs - Right click on the Apple software Tool icon and choose properties. Click on the compatibility tab. At the bottom of this tab click on "change settings for all users" and hit Yes at the UAC pop-up. Now make sure you place a check in the "Run this program as Administrator" under the Privilege level section at the bottom. Hit Apply and then OK. The hit Ok again to get off the properties pop-up.
When I went back and clicked on the Apple Software Update shortcut, I got a UAC pop-up asking me if I wanted to proceed(something I had always, in the past, gotten but haven't since this problem started). The Apple Software Update tool came up and to my suprise the progress bar STAYED and started to slowly fill up partially with the green progress bar. Viola, the itunes 10.6.3 update showed up on the top part of the screen as a new update needing to be installed - the bottom screen, as usual, had the changelog info for the 10.6.3 update. I clicked on install and , again, Viola. the update downloaded and installed flawlessly. I had to reboot my computer and when it restarted, itunes was working perfectly and it was correctly showing as itunes v10.6.3.25.
I say it is almost or sort of fixed because when you click on the Apple Software Update shortcut after the 10.6.3 install it goes back to doing the same thing it did before(i.e. processing for a second and then saying there are new updates but showing a blank field). Maybe this is the way the software now looks if there are no updates available to install - maybe Apple is working on this to eventually get it back to normal. All I know is the process I outlined above worked for me(at least to get the ASU to recognize and properly download and install itunes 10.6.3). It's certainly not perfect, but it worked. Please try this method and let me know what results you have with it. Good luck.

Remote for iPod does not work for MENU

I have just bought a 30GB iPod and the A/V connection Kit which includes a Remote. The menu function of the Remote has no effect on the iPod.
One reply to such question stated, quote ... it does not work ... it is meant for the front row software.
In the documentation provided with the A/V connection Kit, there was nothing re the limitation in functionality of the unit.
Could someone pls explain to me what is meant by "front row software" in relation to the iPod ?
Tks for assistance.
jc
ps I am new to these things !!!

Thank you for promt reply.
In reading the documentation more carefully, it does state without going into details, that the Menu button is for other Apple applications.
Tks again
jc

Interface for Excel does not work in Windows 7 - Important

Hi,
Im using BPC 75 MS SP04 with a computer Windows 7, IE 9, Office 2007. Apparently the Excel works "fine", the issue is that whenever I try to access to Interface for web from the main page (clicking the icon) it does not work, does not do anything...
What do you suggest to do?
Working directly in excel is not a problem, accesing to templates vía "Etools - Open dynamic templates" is fine.
The issue is that users that have every access controlled by BPF's (using Interface for Web) cannot work.
Also, we use a template that uses 12 EVDRE reports in the background, we know it is a lot... but it was required like that.
Once accesing to this template vía Etools -Open dynamic template... Excel gets stuck and I have to force it to shut down.
Also Im working with a Vista system, Office 2003.
For this systems, we also use the template EVDRE (12 reports). Once any of both systems access to this specific template, Excel gets stuck and I have to shut it down. Any other template is able to work with, but these 2 machines (7 and Vista) cant.
Please help !
Velázquez

Hi Velázquez,
Based on SAP Note: 1603248, IE9 is not supported on BPC 7 and 7.5.
So you have to revert to IE8.
Only IE8 and IE7 are supported in 7.5 MS.
Hope this helps.
Karthik AJ

Enforcing JRE version for Applet does not work - 1.4.2

Hi,
Our application (Applet) requires JRE 1.4.2 .
I believe I need to use STATIC VERSIONING as we want the client desktop to ONLY use 1.4.2 for our applet.
So I followed the instructions mentioned in
http://java.sun.com/j2se/1.4.2/docs/guide/plugin/developer_guide/using_tags.html#in-ie
and
http://java.sun.com/products/plugin/versions.html
But for some reason the JAVA Installer fails to install the package.
It comes back with this pop-up error message:
Error - Java(TM) Installer
Unable to download http://java.sun.com/update/1.4.2/1.4.2-b28.xml for installation
Here is the jsp code snippet:
<center>
<OBJECT classid="clsid:CAFEEFAC-0014-0002-0000-ABCDEFFEDCBA" id="myapplet" NAME="myapplet"
 width="650" height="426" border="1" align="baseline"
 codebase="http://java.sun.com/products/plugin/autodl/jinstall-1_4_2-windows-i586.cab#Version=1,4,2,0">
 <PARAM name="code" value="com.statestreet.gia.ui.applet.ComponentApplet">
 <PARAM name="codebase" value="/jars">
 <PARAM name="type" value="application/x-java-applet;jpi-version=1.4.2">
 <PARAM NAME="cache_option" VALUE="Plugin">
 <PARAM NAME="cache_archive" VALUE="jar1.jar,jar2.jar">
 <PARAM name="scriptable" value="true">
 <PARAM NAME="mayscript" VALUE ="true">
 <center>
 This page requires the Java Runtime Environment Plug-in. If you see this message,
 the automatic install probably failed. Please <A href="http://java.sun.com/j2se/1.4.2/download.html">click here
</A>
 to manually install the environment. If prompted, please choose "Run this file from its current location" or "Open"
. 
 Accept all of the defaults during the installation. When the installation completes, please click the refresh butto
n on your browser. 
 If this process does not work, please contact the Help Desk.
 
 </center>
</OBJECT>
</center>I have tried changing the codebase by removing the "#Version part.." but still no result.
Any suggestion is greatly appreciated.
thanks
hp

Yeah, after hours of searching it must be so that my son has a 8GB i.e. a 2G version and mine just happens to be the 3G as I bought mine a month later....did not know how to know the difference but now solved, thnx.

VSL Performance tool for EXS does not work in Logic 8?!

Similar Messages

Maybe you are looking for