VSM shows VEM absent, but seems to be working. How to fix VSM?

Question

I have a N1k version 4.0.4.SV13a that has 15 hosts connected to it and working.
I added a new host yesterday and the VEM install went smoothly (VUM) and everything looks good in vCenter.
However when I look in the VSM the module doesn't show up. When I do a show mod vem map it shows up as absent.
On the ESXi host (4.1)everything looks good.
    vem status shows the DVS with the ports
    vemcmd show card info  -  This seems to show that I am connected to the VSM
  vemcmd show trunk -  This shows all the correct vlans with CBL 4
   vemcmd show port -  This shows the interface with the Control vlan as Down.  Also the trunk interfaces are set to CBL 0
Any idea on how to fix this?  It is almost like there isn't a network path, but this blade has the exact same service profile template (UCS) as all the other blades.

Answer 1

Here are all the commands.  I have only removed the IP addresses....
I tried the vem restart and that didn't change anything.....
/sbin # /usr/lib/ext/cisco/nexus/vem-v121/sbin/vem-health check 00:50:56:98:00:03
VSM Control MAC address: 00:50:56:98:00:03
Control VLAN: 998
DPA MAC: 00:02:3d:40:0a:02
The VEM-VSM connectivity seems to be fine.
/sbin # vemcmd show card
Card UUID type  2: 997040e0-a49a-11df-0000-00000000005d
Card name: bwi40-esxi-43
Switch name: hcs1-vzb-n1kv-1
Switch alias: DvsPortset-0
Switch uuid: 6e e1 18 50 12 9c fe e2-42 8e a7 e7 9f 25 47 39
Card domain: 10
Card slot: 3
VEM Tunnel Mode: L2 Mode
VEM Control (AIPC) MAC: 00:02:3d:10:0a:02
VEM Packet (Inband) MAC: 00:02:3d:20:0a:02
VEM Control Agent (DPA) MAC: 00:02:3d:40:0a:02
VEM SPAN MAC: 00:02:3d:30:0a:02
Management IPv4 address: XX.XX.XX.XX
Management IPv6 address: 0000:0000:0000:0000:0000:0000:0000:0000
Max physical ports: 32
Max virtual ports: 216
Card control VLAN: 998
Card packet VLAN: 997
       Processors: 24
  Processor Cores: 12
Processor Sockets: 2
  Kernel Memory:   50265192
Port link-up delay: 5s
Heartbeat Set: False
/sbin # vemcmd show port
  LTL    IfIndex   Vlan    Bndl  SG_ID Pinned_SGID  Type  Admin State  CBL Mode   Name
    8          0   3969       0     32          32  VIRT     UP  DOWN    4 Access
    9          0   3969       0     32          32  VIRT     UP  DOWN    4 Access
   10          0    998       0     32          32  VIRT     UP  DOWN    4 Access
   11          0   3968       0     32          32  VIRT     UP  DOWN    4 Access
   12          0    997       0     32          32  VIRT     UP  DOWN    4 Access
   13          0      1       0     32          32  VIRT     UP  DOWN    0 Access
   14          0   3967       0     32          32  VIRT     UP  DOWN    4 Access
   15          0   3967       0     32          32  VIRT     UP  DOWN    4 Access
   16          0      1 T     0     32          32  PHYS     UP    UP    0  Trunk vmnic0
   17          0      1 T     0     32          32  PHYS     UP    UP    0  Trunk vmnic1
   48          0    994       0     32          32  VIRT     UP    UP    4 Access vmk0
   49          0    996       0     32          32  VIRT     UP    UP    4 Access vmk1
/sbin # vemcmd show trunk
Trunk port 16 native_vlan 1 CBL 0
vlan(994) cbl 4, vlan(996) cbl 4, vlan(997) cbl 4, vlan(998) cbl 4, vlan(999) cbl 4,
Trunk port 17 native_vlan 1 CBL 0
vlan(994) cbl 4, vlan(996) cbl 4, vlan(997) cbl 4, vlan(998) cbl 4, vlan(999) cbl 4,
/sbin # vemcmd show bd 998
BD 998, vdc 1, vlan 998, 3 ports
Portlist:
     10
     16  vmnic0
     17  vmnic1
hcs1-vzb-n1kv-1# show mod vem mapping
Mod     Status          UUID                                    License Status
  3          absent     997040e0-a49a-11df-0000-00000000005d    licensed